Merge master.kernel.org:/home/rmk/linux-2.6-arm

98 files changed, 11839 insertions, 2540 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ec77721507cb..3df7cbd924a1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -239,6 +239,8 @@ source "arch/arm/plat-omap/Kconfig"
 
 source "arch/arm/mach-omap1/Kconfig"
 
+source "arch/arm/mach-omap2/Kconfig"
+
 source "arch/arm/mach-s3c2410/Kconfig"
 
 source "arch/arm/mach-lh7a40x/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 114cda7f1b73..81bd2193fe6d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -93,6 +93,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET)   := 0xc0008000
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
+ machine-$(CONFIG_ARCH_OMAP2)	   := omap2
   incdir-$(CONFIG_ARCH_OMAP)	   := omap
  machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 4198677cd394..529f0f72e1e9 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Mon Sep  5 18:07:12 2005
+# Linux kernel version: 2.6.14
+# Wed Nov  9 18:53:40 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -22,6 +22,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_KMOD is not set
 
 #
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # System Type
 #
 # CONFIG_ARCH_CLPS7500 is not set
@@ -81,6 +100,7 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_OMAP=y
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -112,7 +132,7 @@ CONFIG_OMAP_SERIAL_WAKE=y
 # OMAP Core Type
 #
 # CONFIG_ARCH_OMAP730 is not set
-# CONFIG_ARCH_OMAP1510 is not set
+# CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
 
 #
@@ -177,6 +197,8 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -258,14 +280,19 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -281,6 +308,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -291,6 +322,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -328,21 +360,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -369,10 +393,12 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
 
@@ -404,6 +430,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -439,6 +470,7 @@ CONFIG_PPP=y
 # CONFIG_PPP_SYNC_TTY is not set
 # CONFIG_PPP_DEFLATE is not set
 # CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
 CONFIG_SLIP=y
 CONFIG_SLIP_COMPRESSED=y
@@ -541,18 +573,18 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
-CONFIG_ISP1301_OMAP=y
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -560,6 +592,10 @@ CONFIG_HWMON=y
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -576,7 +612,6 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 # CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
@@ -589,6 +624,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -600,6 +636,7 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
+# CONFIG_FONT_RL is not set
 
 #
 # Logo configuration
@@ -624,10 +661,10 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
+# CONFIG_OBSOLETE_OSS_DRIVER is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
 # CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_AD1980 is not set
 
 #
 # USB support
@@ -637,22 +674,21 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 # CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
@@ -673,10 +709,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
@@ -685,6 +717,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -706,10 +739,10 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -750,6 +783,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -859,6 +893,7 @@ CONFIG_CRYPTO_DES=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S
index cb5e3708f118..fe797cf320bb 100644
--- a/arch/arm/lib/csumpartial.S
+++ b/arch/arm/lib/csumpartial.S
@@ -39,6 +39,7 @@ td3	.req	lr
 
 		/* we must have at least one byte. */
 		tst	buf, #1			@ odd address?
+		movne	sum, sum, ror #8
 		ldrneb	td0, [buf], #1
 		subne	len, len, #1
 		adcnes	sum, sum, td0, put_byte_1
@@ -103,6 +104,9 @@ ENTRY(csum_partial)
 		cmp	len, #8			@ Ensure that we have at least
 		blo	.less8			@ 8 bytes to copy.
 
+		tst	buf, #1
+		movne	sum, sum, ror #8
+
 		adds	sum, sum, #0		@ C = 0
 		tst	buf, #3			@ Test destination alignment
 		blne	.not_aligned		@ aligh destination, return here
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 89762a26495c..385285851cb5 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Options"
 
 comment "IXP4xx Platforms"
 
+# This entry is placed on top because otherwise it would have
+# been shown as a submenu.
+config MACH_NSLU2
+	bool
+	prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
+	help
+	  Say 'Y' here if you want your kernel to support Linksys's
+	  NSLU2 NAS device. For more information on this platform,
+	  see http://www.nslu2-linux.org
+
 config ARCH_AVILA
 	bool "Avila"
 	help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index ddecbda4a633..7a15629c18d0 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-pci.o ixdp425-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
+obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o
 
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
new file mode 100644
index 000000000000..a575f2e0b2c8
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-ixp4xx/nslu2-pci.c
+ *
+ * NSLU2 board-level PCI initialization
+ *
+ * based on ixdp425-pci.c:
+ *	Copyright (C) 2002 Intel Corporation.
+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Maintainer: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+void __init nslu2_pci_preinit(void)
+{
+	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
+
+	gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
+	gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
+	gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
+
+	/* INTD is not configured as GPIO is used
+	 * for the power input button.
+	 */
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
+		IRQ_NSLU2_PCI_INTA,
+		IRQ_NSLU2_PCI_INTB,
+		IRQ_NSLU2_PCI_INTC,
+	};
+
+	int irq = -1;
+
+	if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
+		pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
+			irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES];
+	}
+
+	return irq;
+}
+
+struct hw_pci __initdata nslu2_pci = {
+	.nr_controllers = 1,
+	.preinit	= nslu2_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= nslu2_map_irq,
+};
+
+int __init nslu2_pci_init(void) /* monkey see, monkey do */
+{
+	if (machine_is_nslu2())
+		pci_common_init(&nslu2_pci);
+
+	return 0;
+}
+
+subsys_initcall(nslu2_pci_init);
diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c
new file mode 100644
index 000000000000..18fbc8c0fb30
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/nslu2-power.c
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-ixp4xx/nslu2-power.c
+ *
+ * NSLU2 Power/Reset driver
+ *
+ * Copyright (C) 2005 Tower Technologies
+ *
+ * based on nslu2-io.c
+ *  Copyright (C) 2004 Karen Spearel
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach-types.h>
+
+extern void ctrl_alt_del(void);
+
+static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/* Signal init to do the ctrlaltdel action, this will bypass init if
+	 * it hasn't started and do a kernel_restart.
+	 */
+	ctrl_alt_del();
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/* This is the paper-clip reset, it shuts the machine down directly.
+	 */
+	machine_power_off();
+
+	return IRQ_HANDLED;
+}
+
+static int __init nslu2_power_init(void)
+{
+	if (!(machine_is_nslu2()))
+		return 0;
+
+	*IXP4XX_GPIO_GPISR = 0x20400000;	/* read the 2 irqs to clr */
+
+	set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
+	set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
+
+	gpio_line_isr_clear(NSLU2_RB_GPIO);
+	gpio_line_isr_clear(NSLU2_PB_GPIO);
+
+	if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
+		SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			NSLU2_RB_IRQ);
+
+		return -EIO;
+	}
+
+	if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
+		SA_INTERRUPT, "NSLU2 power button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
+			NSLU2_PB_IRQ);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void __exit nslu2_power_exit(void)
+{
+	free_irq(NSLU2_RB_IRQ, NULL);
+	free_irq(NSLU2_PB_IRQ, NULL);
+}
+
+module_init(nslu2_power_init);
+module_exit(nslu2_power_exit);
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("NSLU2 Power/Reset driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
new file mode 100644
index 000000000000..289e94cb65c2
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -0,0 +1,134 @@
+/*
+ * arch/arm/mach-ixp4xx/nslu2-setup.c
+ *
+ * NSLU2 board-setup
+ *
+ * based ixdp425-setup.c:
+ *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Author: Mark Rakes <mrakes at mac.com>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * Fixed missing init_time in MACHINE_START kas11 10/22/04
+ * Changed to conform to new style __init ixdp425 kas11 10/22/04
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data nslu2_flash_data = {
+	.map_name		= "cfi_probe",
+	.width			= 2,
+};
+
+static struct resource nslu2_flash_resource = {
+	.start			= NSLU2_FLASH_BASE,
+	.end			= NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
+	.flags			= IORESOURCE_MEM,
+};
+
+static struct platform_device nslu2_flash = {
+	.name			= "IXP4XX-Flash",
+	.id			= 0,
+	.dev.platform_data	= &nslu2_flash_data,
+	.num_resources		= 1,
+	.resource		= &nslu2_flash_resource,
+};
+
+static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
+	.sda_pin		= NSLU2_SDA_PIN,
+	.scl_pin		= NSLU2_SCL_PIN,
+};
+
+static struct platform_device nslu2_i2c_controller = {
+	.name			= "IXP4XX-I2C",
+	.id			= 0,
+	.dev.platform_data	= &nslu2_i2c_gpio_pins,
+	.num_resources		= 0,
+};
+
+static struct resource nslu2_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port nslu2_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ }
+};
+
+static struct platform_device nslu2_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= nslu2_uart_data,
+	.num_resources		= 2,
+	.resource		= nslu2_uart_resources,
+};
+
+static struct platform_device *nslu2_devices[] __initdata = {
+	&nslu2_i2c_controller,
+	&nslu2_flash,
+	&nslu2_uart,
+};
+
+static void nslu2_power_off(void)
+{
+	/* This causes the box to drop the power and go dead. */
+
+	/* enable the pwr cntl gpio */
+	gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
+
+	/* do the deed */
+	gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
+}
+
+static void __init nslu2_init(void)
+{
+	ixp4xx_sys_init();
+
+	pm_power_off = nslu2_power_off;
+
+	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
+}
+
+MACHINE_START(NSLU2, "Linksys NSLU2")
+	/* Maintainer: www.nslu2-linux.org */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer          = &ixp4xx_timer,
+	.init_machine	= nslu2_init,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 27fc2e8e5fca..86a0f0d14345 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -6,10 +6,10 @@ config ARCH_OMAP730
 	bool "OMAP730 Based System"
 	select ARCH_OMAP_OTG
 
-config ARCH_OMAP1510
+config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
 	default y
-	bool "OMAP1510 Based System"
+	bool "OMAP15xx Based System"
 
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1
@@ -21,7 +21,7 @@ comment "OMAP Board Type"
 
 config MACH_OMAP_INNOVATOR
 	bool "TI Innovator"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
 	help
           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
           have such a board.
@@ -64,20 +64,30 @@ config MACH_OMAP_PERSEUS2
 
 config MACH_VOICEBLUE
 	bool "Voiceblue"
-	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
 	  such a board.
 
 config MACH_NETSTAR
 	bool "NetStar"
-	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Support for NetStar PBX. Say Y here if you have such a board.
 
+config MACH_OMAP_PALMTE
+	bool "Palm Tungsten E"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	help
+          Support for the Palm Tungsten E PDA. Currently only the LCD panel
+          is supported. To boot the kernel, you'll need a PalmOS compatible
+          bootloader; check out http://palmtelinux.sourceforge.net for more
+          informations.
+          Say Y here if you have such a PDA, say NO otherwise.
+
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
 	help
           Support for generic OMAP-1510, 1610 or 1710 board with
           no FPGA. Can be used as template for porting Linux to
@@ -121,32 +131,32 @@ config OMAP_ARM_182MHZ
 
 config OMAP_ARM_168MHZ
 	bool "OMAP ARM 168 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
 	help
           Enable 168MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_150MHZ
 	bool "OMAP ARM 150 MHz CPU"
-	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Enable 150MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_120MHZ
 	bool "OMAP ARM 120 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
 	help
           Enable 120MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_60MHZ
 	bool "OMAP ARM 60 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
         default y
 	help
           Enable 60MHz clock for OMAP CPU. If unsure, say Y.
 
 config OMAP_ARM_30MHZ
 	bool "OMAP ARM 30 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
 	help
           Enable 30MHz clock for OMAP CPU. If unsure, say N.
 
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 181a93deaaee..b0b00156faae 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := io.o id.o irq.o time.o serial.o devices.o
+obj-y := io.o id.o clock.o irq.o time.o mux.o serial.o devices.o
 led-y := leds.o
 
 # Specific board support
@@ -15,8 +15,9 @@ obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
 obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o
 obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
 obj-$(CONFIG_MACH_NETSTAR)		+= board-netstar.o
+obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 
-ifeq ($(CONFIG_ARCH_OMAP1510),y)
+ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 # Innovator-1510 FPGA
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
 endif
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c209c7172a9a..4b292e93fbe2 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -15,7 +15,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -28,8 +28,6 @@
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
 
-static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static void __init omap_generic_init_irq(void)
 {
 	omap_init_irq();
@@ -37,7 +35,7 @@ static void __init omap_generic_init_irq(void)
 
 /* assume no Mini-AB port */
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_usb_config generic1510_usb_config __initdata = {
 	.register_host	= 1,
 	.register_dev	= 1,
@@ -76,21 +74,19 @@ static struct omap_mmc_config generic_mmc_config __initdata = {
 
 #endif
 
+static struct omap_uart_config generic_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
 static struct omap_board_config_kernel generic_config[] = {
 	{ OMAP_TAG_USB,           NULL },
 	{ OMAP_TAG_MMC,           &generic_mmc_config },
+	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
 static void __init omap_generic_init(void)
 {
-	const struct omap_uart_config *uart_conf;
-
-	/*
-	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on
-	 * if not needed.
-	 */
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		generic_config[0].data = &generic1510_usb_config;
 	}
@@ -101,20 +97,9 @@ static void __init omap_generic_init(void)
 	}
 #endif
 
-	uart_conf = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	if (uart_conf != NULL) {
-		unsigned int enabled_ports, i;
-
-		enabled_ports = uart_conf->enabled_uarts;
-		for (i = 0; i < 3; i++) {
-			if (!(enabled_ports & (1 << i)))
-				generic_serial_ports[i] = 0;
-		}
-	}
-
 	omap_board_config = generic_config;
 	omap_board_config_size = ARRAY_SIZE(generic_config);
-	omap_serial_init(generic_serial_ports);
+	omap_serial_init();
 }
 
 static void __init omap_generic_map_io(void)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 4ee6bd8a50b8..a07e2c9307fa 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -40,8 +40,6 @@
 
 extern int omap_gpio_init(void);
 
-static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static struct mtd_partition h2_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -160,9 +158,20 @@ static struct omap_mmc_config h2_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config h2_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config h2_lcd_config __initdata = {
+	.panel_name	= "h2",
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel h2_config[] = {
 	{ OMAP_TAG_USB,           &h2_usb_config },
 	{ OMAP_TAG_MMC,           &h2_mmc_config },
+	{ OMAP_TAG_UART,	&h2_uart_config },
+	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
 
 static void __init h2_init(void)
@@ -180,12 +189,12 @@ static void __init h2_init(void)
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
 	omap_board_config = h2_config;
 	omap_board_config_size = ARRAY_SIZE(h2_config);
+	omap_serial_init();
 }
 
 static void __init h2_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(h2_serial_ports);
 }
 
 MACHINE_START(OMAP_H2, "TI-H2")
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index fc824361430d..668e278433c2 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -41,8 +41,6 @@
 
 extern int omap_gpio_init(void);
 
-static int __initdata h3_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static struct mtd_partition h3_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -168,9 +166,20 @@ static struct omap_mmc_config h3_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config h3_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config h3_lcd_config __initdata = {
+	.panel_name	= "h3",
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel h3_config[] = {
-	{ OMAP_TAG_USB,	 &h3_usb_config },
-	{ OMAP_TAG_MMC,  &h3_mmc_config },
+	{ OMAP_TAG_USB,		&h3_usb_config },
+	{ OMAP_TAG_MMC,		&h3_mmc_config },
+	{ OMAP_TAG_UART,	&h3_uart_config },
+	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
 
 static void __init h3_init(void)
@@ -180,6 +189,7 @@ static void __init h3_init(void)
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 	omap_board_config = h3_config;
 	omap_board_config_size = ARRAY_SIZE(h3_config);
+	omap_serial_init();
 }
 
 static void __init h3_init_smc91x(void)
@@ -201,7 +211,6 @@ void h3_init_irq(void)
 static void __init h3_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(h3_serial_ports);
 }
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index a2eac853b2da..95f1ff36cdcb 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -36,8 +36,6 @@
 #include <asm/arch/usb.h>
 #include <asm/arch/common.h>
 
-static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static struct mtd_partition innovator_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -99,7 +97,7 @@ static struct platform_device innovator_flash_device = {
 	.resource	= &innovator_flash_resource,
 };
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc innovator1510_io_desc[] __initdata = {
@@ -136,7 +134,7 @@ static struct platform_device *innovator1510_devices[] __initdata = {
 	&innovator1510_smc91x_device,
 };
 
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
 
 #ifdef CONFIG_ARCH_OMAP16XX
 
@@ -185,7 +183,7 @@ void innovator_init_irq(void)
 {
 	omap_init_irq();
 	omap_gpio_init();
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		omap1510_fpga_init_irq();
 	}
@@ -193,7 +191,7 @@ void innovator_init_irq(void)
 	innovator_init_smc91x();
 }
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_usb_config innovator1510_usb_config __initdata = {
 	/* for bundled non-standard host and peripheral cables */
 	.hmc_mode	= 4,
@@ -205,6 +203,11 @@ static struct omap_usb_config innovator1510_usb_config __initdata = {
 	.register_dev	= 1,
 	.pins[0]	= 2,
 };
+
+static struct omap_lcd_config innovator1510_lcd_config __initdata = {
+	.panel_name	= "inn1510",
+	.ctrl_name	= "internal",
+};
 #endif
 
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -222,6 +225,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
 
 	.pins[1]	= 3,
 };
+
+static struct omap_lcd_config innovator1610_lcd_config __initdata = {
+	.panel_name	= "inn1610",
+	.ctrl_name	= "internal",
+};
 #endif
 
 static struct omap_mmc_config innovator_mmc_config __initdata = {
@@ -234,14 +242,20 @@ static struct omap_mmc_config innovator_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config innovator_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
 static struct omap_board_config_kernel innovator_config[] = {
 	{ OMAP_TAG_USB,         NULL },
+	{ OMAP_TAG_LCD,		NULL },
 	{ OMAP_TAG_MMC,		&innovator_mmc_config },
+	{ OMAP_TAG_UART,	&innovator_uart_config },
 };
 
 static void __init innovator_init(void)
 {
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
 	}
@@ -252,23 +266,28 @@ static void __init innovator_init(void)
 	}
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
-	if (cpu_is_omap1510())
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (cpu_is_omap1510()) {
 		innovator_config[0].data = &innovator1510_usb_config;
+		innovator_config[1].data = &innovator1510_lcd_config;
+	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
-	if (cpu_is_omap1610())
+	if (cpu_is_omap1610()) {
 		innovator_config[0].data = &h2_usb_config;
+		innovator_config[1].data = &innovator1610_lcd_config;
+	}
 #endif
 	omap_board_config = innovator_config;
 	omap_board_config_size = ARRAY_SIZE(innovator_config);
+	omap_serial_init();
 }
 
 static void __init innovator_map_io(void)
 {
 	omap_map_common_io();
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
 		udelay(10);	/* Delay needed for FPGA */
@@ -280,7 +299,6 @@ static void __init innovator_map_io(void)
 		       fpga_read(OMAP1510_FPGA_BOARD_REV));
 	}
 #endif
-	omap_serial_init(innovator_serial_ports);
 }
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c
index c851c2e4dfcb..0448fa7de8a4 100644
--- a/arch/arm/mach-omap1/board-netstar.c
+++ b/arch/arm/mach-omap1/board-netstar.c
@@ -55,6 +55,14 @@ static struct platform_device *netstar_devices[] __initdata = {
 	&netstar_smc91x_device,
 };
 
+static struct omap_uart_config netstar_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel netstar_config[] = {
+	{ OMAP_TAG_UART,	&netstar_uart_config },
+};
+
 static void __init netstar_init_irq(void)
 {
 	omap_init_irq();
@@ -92,14 +100,15 @@ static void __init netstar_init(void)
 	/* Switch off red LED */
 	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
 	omap_writeb(0x80, OMAP_LPG1_LCR);
-}
 
-static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+	omap_board_config = netstar_config;
+	omap_board_config_size = ARRAY_SIZE(netstar_config);
+	omap_serial_init();
+}
 
 static void __init netstar_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(omap_serial_ports);
 }
 
 #define MACHINE_PANICED		1
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a88524e7c315..e990e1bc1669 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -46,8 +46,6 @@
 #include <asm/arch/tc.h>
 #include <asm/arch/common.h>
 
-static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0};
-
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -155,7 +153,7 @@ static void __init osk_init_smc91x(void)
 	}
 
 	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
-	EMIFS_CCS(1) |= 0x2;
+	EMIFS_CCS(1) |= 0x3;
 }
 
 static void __init osk_init_cf(void)
@@ -193,8 +191,19 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
+static struct omap_uart_config osk_uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static struct omap_lcd_config osk_lcd_config __initdata = {
+	.panel_name	= "osk",
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel osk_config[] = {
 	{ OMAP_TAG_USB,           &osk_usb_config },
+	{ OMAP_TAG_UART,		&osk_uart_config },
+	{ OMAP_TAG_LCD,			&osk_lcd_config },
 };
 
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
@@ -254,13 +263,13 @@ static void __init osk_init(void)
 	omap_board_config_size = ARRAY_SIZE(osk_config);
 	USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
 
+	omap_serial_init();
 	osk_mistral_init();
 }
 
 static void __init osk_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(osk_serial_ports);
 }
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
new file mode 100644
index 000000000000..540b20d78cca
--- /dev/null
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -0,0 +1,87 @@
+/*
+ * linux/arch/arm/mach-omap1/board-palmte.c
+ *
+ * Modified from board-generic.c
+ *
+ * Support for the Palm Tungsten E PDA.
+ *
+ * Original version : Laurent Gonzalez
+ *
+ * Maintainters : http://palmtelinux.sf.net
+ *                palmtelinux-developpers@lists.sf.net
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/hardware/clock.h>
+
+static void __init omap_generic_init_irq(void)
+{
+	omap_init_irq();
+}
+
+static struct omap_usb_config palmte_usb_config __initdata = {
+	.register_dev	= 1,
+	.hmc_mode	= 0,
+	.pins[0]	= 3,
+};
+
+static struct omap_mmc_config palmte_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled 	= 1,
+		.wire4		= 1,
+		.wp_pin		= OMAP_MPUIO(3),
+		.power_pin	= -1,
+		.switch_pin	= -1,
+	},
+};
+
+static struct omap_lcd_config palmte_lcd_config __initdata = {
+	.panel_name	= "palmte",
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel palmte_config[] = {
+	{ OMAP_TAG_USB, &palmte_usb_config },
+	{ OMAP_TAG_MMC,	&palmte_mmc_config },
+	{ OMAP_TAG_LCD,	&palmte_lcd_config },
+};
+
+static void __init omap_generic_init(void)
+{
+	omap_board_config = palmte_config;
+	omap_board_config_size = ARRAY_SIZE(palmte_config);
+}
+
+static void __init omap_generic_map_io(void)
+{
+	omap_map_common_io();
+}
+
+MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_generic_map_io,
+	.init_irq	= omap_generic_init_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 354b157acb3a..bd900b7ab33c 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -29,6 +29,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
 #include <asm/arch/common.h>
+#include <asm/arch/board.h>
 
 static struct resource smc91x_resources[] = {
 	[0] = {
@@ -43,8 +44,6 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
-static int __initdata p2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 0};
-
 static struct mtd_partition p2_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -111,9 +110,27 @@ static struct platform_device *devices[] __initdata = {
 	&smc91x_device,
 };
 
+static struct omap_uart_config perseus2_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1)),
+};
+
+static struct omap_lcd_config perseus2_lcd_config __initdata = {
+	.panel_name	= "p2",
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel perseus2_config[] = {
+	{ OMAP_TAG_UART,	&perseus2_uart_config },
+	{ OMAP_TAG_LCD,		&perseus2_lcd_config },
+};
+
 static void __init omap_perseus2_init(void)
 {
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	omap_board_config = perseus2_config;
+	omap_board_config_size = ARRAY_SIZE(perseus2_config);
+	omap_serial_init();
 }
 
 static void __init perseus2_init_smc91x(void)
@@ -131,7 +148,6 @@ void omap_perseus2_init_irq(void)
 	omap_gpio_init();
 	perseus2_init_smc91x();
 }
-
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {
 	{
@@ -179,7 +195,6 @@ static void __init omap_perseus2_map_io(void)
 	 * It is used as the Ethernet controller interrupt
 	 */
 	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
-	omap_serial_init(p2_serial_ports);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 3f018b296861..6f9a6220e78a 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -150,9 +150,14 @@ static struct omap_mmc_config voiceblue_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config voiceblue_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
 static struct omap_board_config_kernel voiceblue_config[] = {
 	{ OMAP_TAG_USB, &voiceblue_usb_config },
 	{ OMAP_TAG_MMC, &voiceblue_mmc_config },
+	{ OMAP_TAG_UART,	&voiceblue_uart_config },
 };
 
 static void __init voiceblue_init_irq(void)
@@ -191,6 +196,7 @@ static void __init voiceblue_init(void)
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
 	omap_board_config = voiceblue_config;
 	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
+	omap_serial_init();
 
 	/* There is a good chance board is going up, so enable power LED
 	 * (it is connected through invertor) */
@@ -198,12 +204,9 @@ static void __init voiceblue_init(void)
 	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
 }
 
-static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static void __init voiceblue_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(omap_serial_ports);
 }
 
 #define MACHINE_PANICED		1
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
new file mode 100644
index 000000000000..4277eee44ed5
--- /dev/null
+++ b/arch/arm/mach-omap1/clock.c
@@ -0,0 +1,792 @@
+/*
+ *  linux/arch/arm/mach-omap1/clock.c
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ *  Modified to use omap shared clock framework by
+ *  Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <asm/hardware/clock.h>
+
+#include <asm/arch/usb.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+
+#include "clock.h"
+
+__u32 arm_idlect1_mask;
+
+/*-------------------------------------------------------------------------
+ * Omap1 specific clock functions
+ *-------------------------------------------------------------------------*/
+
+static void omap1_watchdog_recalc(struct clk * clk)
+{
+	clk->rate = clk->parent->rate / 14;
+}
+
+static void omap1_uart_recalc(struct clk * clk)
+{
+	unsigned int val = omap_readl(clk->enable_reg);
+	if (val & clk->enable_bit)
+		clk->rate = 48000000;
+	else
+		clk->rate = 12000000;
+}
+
+static int omap1_clk_enable_dsp_domain(struct clk *clk)
+{
+	int retval;
+
+	retval = omap1_clk_use(&api_ck.clk);
+	if (!retval) {
+		retval = omap1_clk_enable(clk);
+		omap1_clk_unuse(&api_ck.clk);
+	}
+
+	return retval;
+}
+
+static void omap1_clk_disable_dsp_domain(struct clk *clk)
+{
+	if (omap1_clk_use(&api_ck.clk) == 0) {
+		omap1_clk_disable(clk);
+		omap1_clk_unuse(&api_ck.clk);
+	}
+}
+
+static int omap1_clk_enable_uart_functional(struct clk *clk)
+{
+	int ret;
+	struct uart_clk *uclk;
+
+	ret = omap1_clk_enable(clk);
+	if (ret == 0) {
+		/* Set smart idle acknowledgement mode */
+		uclk = (struct uart_clk *)clk;
+		omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
+			    uclk->sysc_addr);
+	}
+
+	return ret;
+}
+
+static void omap1_clk_disable_uart_functional(struct clk *clk)
+{
+	struct uart_clk *uclk;
+
+	/* Set force idle acknowledgement mode */
+	uclk = (struct uart_clk *)clk;
+	omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);
+
+	omap1_clk_disable(clk);
+}
+
+static void omap1_clk_allow_idle(struct clk *clk)
+{
+	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
+
+	if (!(clk->flags & CLOCK_IDLE_CONTROL))
+		return;
+
+	if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count))
+		arm_idlect1_mask |= 1 << iclk->idlect_shift;
+}
+
+static void omap1_clk_deny_idle(struct clk *clk)
+{
+	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
+
+	if (!(clk->flags & CLOCK_IDLE_CONTROL))
+		return;
+
+	if (iclk->no_idle_count++ == 0)
+		arm_idlect1_mask &= ~(1 << iclk->idlect_shift);
+}
+
+static __u16 verify_ckctl_value(__u16 newval)
+{
+	/* This function checks for following limitations set
+	 * by the hardware (all conditions must be true):
+	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
+	 * ARM_CK >= TC_CK
+	 * DSP_CK >= TC_CK
+	 * DSPMMU_CK >= TC_CK
+	 *
+	 * In addition following rules are enforced:
+	 * LCD_CK <= TC_CK
+	 * ARMPER_CK <= TC_CK
+	 *
+	 * However, maximum frequencies are not checked for!
+	 */
+	__u8 per_exp;
+	__u8 lcd_exp;
+	__u8 arm_exp;
+	__u8 dsp_exp;
+	__u8 tc_exp;
+	__u8 dspmmu_exp;
+
+	per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3;
+	lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3;
+	arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3;
+	dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3;
+	tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3;
+	dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3;
+
+	if (dspmmu_exp < dsp_exp)
+		dspmmu_exp = dsp_exp;
+	if (dspmmu_exp > dsp_exp+1)
+		dspmmu_exp = dsp_exp+1;
+	if (tc_exp < arm_exp)
+		tc_exp = arm_exp;
+	if (tc_exp < dspmmu_exp)
+		tc_exp = dspmmu_exp;
+	if (tc_exp > lcd_exp)
+		lcd_exp = tc_exp;
+	if (tc_exp > per_exp)
+		per_exp = tc_exp;
+
+	newval &= 0xf000;
+	newval |= per_exp << CKCTL_PERDIV_OFFSET;
+	newval |= lcd_exp << CKCTL_LCDDIV_OFFSET;
+	newval |= arm_exp << CKCTL_ARMDIV_OFFSET;
+	newval |= dsp_exp << CKCTL_DSPDIV_OFFSET;
+	newval |= tc_exp << CKCTL_TCDIV_OFFSET;
+	newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET;
+
+	return newval;
+}
+
+static int calc_dsor_exp(struct clk *clk, unsigned long rate)
+{
+	/* Note: If target frequency is too low, this function will return 4,
+	 * which is invalid value. Caller must check for this value and act
+	 * accordingly.
+	 *
+	 * Note: This function does not check for following limitations set
+	 * by the hardware (all conditions must be true):
+	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
+	 * ARM_CK >= TC_CK
+	 * DSP_CK >= TC_CK
+	 * DSPMMU_CK >= TC_CK
+	 */
+	unsigned long realrate;
+	struct clk * parent;
+	unsigned  dsor_exp;
+
+	if (unlikely(!(clk->flags & RATE_CKCTL)))
+		return -EINVAL;
+
+	parent = clk->parent;
+	if (unlikely(parent == 0))
+		return -EIO;
+
+	realrate = parent->rate;
+	for (dsor_exp=0; dsor_exp<4; dsor_exp++) {
+		if (realrate <= rate)
+			break;
+
+		realrate /= 2;
+	}
+
+	return dsor_exp;
+}
+
+static void omap1_ckctl_recalc(struct clk * clk)
+{
+	int dsor;
+
+	/* Calculate divisor encoded as 2-bit exponent */
+	dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
+
+	if (unlikely(clk->rate == clk->parent->rate / dsor))
+		return; /* No change, quick exit */
+	clk->rate = clk->parent->rate / dsor;
+
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
+}
+
+static void omap1_ckctl_recalc_dsp_domain(struct clk * clk)
+{
+	int dsor;
+
+	/* Calculate divisor encoded as 2-bit exponent
+	 *
+	 * The clock control bits are in DSP domain,
+	 * so api_ck is needed for access.
+	 * Note that DSP_CKCTL virt addr = phys addr, so
+	 * we must use __raw_readw() instead of omap_readw().
+	 */
+	omap1_clk_use(&api_ck.clk);
+	dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
+	omap1_clk_unuse(&api_ck.clk);
+
+	if (unlikely(clk->rate == clk->parent->rate / dsor))
+		return; /* No change, quick exit */
+	clk->rate = clk->parent->rate / dsor;
+
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
+}
+
+/* MPU virtual clock functions */
+static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
+{
+	/* Find the highest supported frequency <= rate and switch to it */
+	struct mpu_rate * ptr;
+
+	if (clk != &virtual_ck_mpu)
+		return -EINVAL;
+
+	for (ptr = rate_table; ptr->rate; ptr++) {
+		if (ptr->xtal != ck_ref.rate)
+			continue;
+
+		/* DPLL1 cannot be reprogrammed without risking system crash */
+		if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate)
+			continue;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->rate <= rate)
+			break;
+	}
+
+	if (!ptr->rate)
+		return -EINVAL;
+
+	/*
+	 * In most cases we should not need to reprogram DPLL.
+	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
+	 */
+	omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+
+	ck_dpll1.rate = ptr->pll_rate;
+	propagate_rate(&ck_dpll1);
+	return 0;
+}
+
+static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
+{
+	int  ret = -EINVAL;
+	int  dsor_exp;
+	__u16  regval;
+
+	if (clk->flags & RATE_CKCTL) {
+		dsor_exp = calc_dsor_exp(clk, rate);
+		if (dsor_exp > 3)
+			dsor_exp = -EINVAL;
+		if (dsor_exp < 0)
+			return dsor_exp;
+
+		regval = __raw_readw(DSP_CKCTL);
+		regval &= ~(3 << clk->rate_offset);
+		regval |= dsor_exp << clk->rate_offset;
+		__raw_writew(regval, DSP_CKCTL);
+		clk->rate = clk->parent->rate / (1 << dsor_exp);
+		ret = 0;
+	}
+
+	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
+		propagate_rate(clk);
+
+	return ret;
+}
+
+static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate)
+{
+	/* Find the highest supported frequency <= rate */
+	struct mpu_rate * ptr;
+	long  highest_rate;
+
+	if (clk != &virtual_ck_mpu)
+		return -EINVAL;
+
+	highest_rate = -EINVAL;
+
+	for (ptr = rate_table; ptr->rate; ptr++) {
+		if (ptr->xtal != ck_ref.rate)
+			continue;
+
+		highest_rate = ptr->rate;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->rate <= rate)
+			break;
+	}
+
+	return highest_rate;
+}
+
+static unsigned calc_ext_dsor(unsigned long rate)
+{
+	unsigned dsor;
+
+	/* MCLK and BCLK divisor selection is not linear:
+	 * freq = 96MHz / dsor
+	 *
+	 * RATIO_SEL range: dsor <-> RATIO_SEL
+	 * 0..6: (RATIO_SEL+2) <-> (dsor-2)
+	 * 6..48:  (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6)
+	 * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9
+	 * can not be used.
+	 */
+	for (dsor = 2; dsor < 96; ++dsor) {
+		if ((dsor & 1) && dsor > 8)
+		  	continue;
+		if (rate >= 96000000 / dsor)
+			break;
+	}
+	return dsor;
+}
+
+/* Only needed on 1510 */
+static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
+{
+	unsigned int val;
+
+	val = omap_readl(clk->enable_reg);
+	if (rate == 12000000)
+		val &= ~(1 << clk->enable_bit);
+	else if (rate == 48000000)
+		val |= (1 << clk->enable_bit);
+	else
+		return -EINVAL;
+	omap_writel(val, clk->enable_reg);
+	clk->rate = rate;
+
+	return 0;
+}
+
+/* External clock (MCLK & BCLK) functions */
+static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
+{
+	unsigned dsor;
+	__u16 ratio_bits;
+
+	dsor = calc_ext_dsor(rate);
+	clk->rate = 96000000 / dsor;
+	if (dsor > 8)
+		ratio_bits = ((dsor - 8) / 2 + 6) << 2;
+	else
+		ratio_bits = (dsor - 2) << 2;
+
+	ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd;
+	omap_writew(ratio_bits, clk->enable_reg);
+
+	return 0;
+}
+
+static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate)
+{
+	return 96000000 / calc_ext_dsor(rate);
+}
+
+static void omap1_init_ext_clk(struct clk * clk)
+{
+	unsigned dsor;
+	__u16 ratio_bits;
+
+	/* Determine current rate and ensure clock is based on 96MHz APLL */
+	ratio_bits = omap_readw(clk->enable_reg) & ~1;
+	omap_writew(ratio_bits, clk->enable_reg);
+
+	ratio_bits = (ratio_bits & 0xfc) >> 2;
+	if (ratio_bits > 6)
+		dsor = (ratio_bits - 6) * 2 + 8;
+	else
+		dsor = ratio_bits + 2;
+
+	clk-> rate = 96000000 / dsor;
+}
+
+static int omap1_clk_use(struct clk *clk)
+{
+	int ret = 0;
+	if (clk->usecount++ == 0) {
+		if (likely(clk->parent)) {
+			ret = omap1_clk_use(clk->parent);
+
+			if (unlikely(ret != 0)) {
+				clk->usecount--;
+				return ret;
+			}
+
+			if (clk->flags & CLOCK_NO_IDLE_PARENT)
+				if (!cpu_is_omap24xx())
+					omap1_clk_deny_idle(clk->parent);
+		}
+
+		ret = clk->enable(clk);
+
+		if (unlikely(ret != 0) && clk->parent) {
+			omap1_clk_unuse(clk->parent);
+			clk->usecount--;
+		}
+	}
+
+	return ret;
+}
+
+static void omap1_clk_unuse(struct clk *clk)
+{
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		clk->disable(clk);
+		if (likely(clk->parent)) {
+			omap1_clk_unuse(clk->parent);
+			if (clk->flags & CLOCK_NO_IDLE_PARENT)
+				if (!cpu_is_omap24xx())
+					omap1_clk_allow_idle(clk->parent);
+		}
+	}
+}
+
+static int omap1_clk_enable(struct clk *clk)
+{
+	__u16 regval16;
+	__u32 regval32;
+
+	if (clk->flags & ALWAYS_ENABLED)
+		return 0;
+
+	if (unlikely(clk->enable_reg == 0)) {
+		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+		       clk->name);
+		return 0;
+	}
+
+	if (clk->flags & ENABLE_REG_32BIT) {
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval32 = __raw_readl(clk->enable_reg);
+			regval32 |= (1 << clk->enable_bit);
+			__raw_writel(regval32, clk->enable_reg);
+		} else {
+			regval32 = omap_readl(clk->enable_reg);
+			regval32 |= (1 << clk->enable_bit);
+			omap_writel(regval32, clk->enable_reg);
+		}
+	} else {
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval16 = __raw_readw(clk->enable_reg);
+			regval16 |= (1 << clk->enable_bit);
+			__raw_writew(regval16, clk->enable_reg);
+		} else {
+			regval16 = omap_readw(clk->enable_reg);
+			regval16 |= (1 << clk->enable_bit);
+			omap_writew(regval16, clk->enable_reg);
+		}
+	}
+
+	return 0;
+}
+
+static void omap1_clk_disable(struct clk *clk)
+{
+	__u16 regval16;
+	__u32 regval32;
+
+	if (clk->enable_reg == 0)
+		return;
+
+	if (clk->flags & ENABLE_REG_32BIT) {
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval32 = __raw_readl(clk->enable_reg);
+			regval32 &= ~(1 << clk->enable_bit);
+			__raw_writel(regval32, clk->enable_reg);
+		} else {
+			regval32 = omap_readl(clk->enable_reg);
+			regval32 &= ~(1 << clk->enable_bit);
+			omap_writel(regval32, clk->enable_reg);
+		}
+	} else {
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval16 = __raw_readw(clk->enable_reg);
+			regval16 &= ~(1 << clk->enable_bit);
+			__raw_writew(regval16, clk->enable_reg);
+		} else {
+			regval16 = omap_readw(clk->enable_reg);
+			regval16 &= ~(1 << clk->enable_bit);
+			omap_writew(regval16, clk->enable_reg);
+		}
+	}
+}
+
+static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	int dsor_exp;
+
+	if (clk->flags & RATE_FIXED)
+		return clk->rate;
+
+	if (clk->flags & RATE_CKCTL) {
+		dsor_exp = calc_dsor_exp(clk, rate);
+		if (dsor_exp < 0)
+			return dsor_exp;
+		if (dsor_exp > 3)
+			dsor_exp = 3;
+		return clk->parent->rate / (1 << dsor_exp);
+	}
+
+	if(clk->round_rate != 0)
+		return clk->round_rate(clk, rate);
+
+	return clk->rate;
+}
+
+static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int  ret = -EINVAL;
+	int  dsor_exp;
+	__u16  regval;
+
+	if (clk->set_rate)
+		ret = clk->set_rate(clk, rate);
+	else if (clk->flags & RATE_CKCTL) {
+		dsor_exp = calc_dsor_exp(clk, rate);
+		if (dsor_exp > 3)
+			dsor_exp = -EINVAL;
+		if (dsor_exp < 0)
+			return dsor_exp;
+
+		regval = omap_readw(ARM_CKCTL);
+		regval &= ~(3 << clk->rate_offset);
+		regval |= dsor_exp << clk->rate_offset;
+		regval = verify_ckctl_value(regval);
+		omap_writew(regval, ARM_CKCTL);
+		clk->rate = clk->parent->rate / (1 << dsor_exp);
+		ret = 0;
+	}
+
+	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
+		propagate_rate(clk);
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------
+ * Omap1 clock reset and init functions
+ *-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Resets some clocks that may be left on from bootloader,
+ * but leaves serial clocks on. See also omap_late_clk_reset().
+ */
+static inline void omap1_early_clk_reset(void)
+{
+	//omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+}
+
+static int __init omap1_late_clk_reset(void)
+{
+	/* Turn off all unused clocks */
+	struct clk *p;
+	__u32 regval32;
+
+	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
+	regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4);
+	omap_writew(regval32, SOFT_REQ_REG);
+	omap_writew(0, SOFT_REQ_REG2);
+
+	list_for_each_entry(p, &clocks, node) {
+		if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) ||
+			p->enable_reg == 0)
+			continue;
+
+		/* Clocks in the DSP domain need api_ck. Just assume bootloader
+		 * has not enabled any DSP clocks */
+		if ((u32)p->enable_reg == DSP_IDLECT2) {
+			printk(KERN_INFO "Skipping reset check for DSP domain "
+			       "clock \"%s\"\n", p->name);
+			continue;
+		}
+
+		/* Is the clock already disabled? */
+		if (p->flags & ENABLE_REG_32BIT) {
+			if (p->flags & VIRTUAL_IO_ADDRESS)
+				regval32 = __raw_readl(p->enable_reg);
+			else
+				regval32 = omap_readl(p->enable_reg);
+		} else {
+			if (p->flags & VIRTUAL_IO_ADDRESS)
+				regval32 = __raw_readw(p->enable_reg);
+			else
+				regval32 = omap_readw(p->enable_reg);
+		}
+
+		if ((regval32 & (1 << p->enable_bit)) == 0)
+			continue;
+
+		/* FIXME: This clock seems to be necessary but no-one
+		 * has asked for its activation. */
+		if (p == &tc2_ck         // FIX: pm.c (SRAM), CCP, Camera
+		    || p == &ck_dpll1out.clk // FIX: SoSSI, SSR
+		    || p == &arm_gpio_ck // FIX: GPIO code for 1510
+		    ) {
+			printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
+			       p->name);
+			continue;
+		}
+
+		printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name);
+		p->disable(p);
+		printk(" done\n");
+	}
+
+	return 0;
+}
+late_initcall(omap1_late_clk_reset);
+
+#else
+#define omap1_early_clk_reset()	{}
+#endif
+
+static struct clk_functions omap1_clk_functions = {
+	.clk_use		= omap1_clk_use,
+	.clk_unuse		= omap1_clk_unuse,
+	.clk_round_rate		= omap1_clk_round_rate,
+	.clk_set_rate		= omap1_clk_set_rate,
+};
+
+int __init omap1_clk_init(void)
+{
+	struct clk ** clkp;
+	const struct omap_clock_config *info;
+	int crystal_type = 0; /* Default 12 MHz */
+
+	omap1_early_clk_reset();
+	clk_init(&omap1_clk_functions);
+
+	/* By default all idlect1 clocks are allowed to idle */
+	arm_idlect1_mask = ~0;
+
+	for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
+		if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) {
+			clk_register(*clkp);
+			continue;
+		}
+
+		if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) {
+			clk_register(*clkp);
+			continue;
+		}
+
+		if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) {
+			clk_register(*clkp);
+			continue;
+		}
+	}
+
+	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
+	if (info != NULL) {
+		if (!cpu_is_omap1510())
+			crystal_type = info->system_clock_type;
+	}
+
+#if defined(CONFIG_ARCH_OMAP730)
+	ck_ref.rate = 13000000;
+#elif defined(CONFIG_ARCH_OMAP16XX)
+	if (crystal_type == 2)
+		ck_ref.rate = 19200000;
+#endif
+
+	printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
+	       omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+	       omap_readw(ARM_CKCTL));
+
+	/* We want to be in syncronous scalable mode */
+	omap_writew(0x1000, ARM_SYSST);
+
+#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
+	/* Use values set by bootloader. Determine PLL rate and recalculate
+	 * dependent clocks as if kernel had changed PLL or divisors.
+	 */
+	{
+		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
+
+		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
+		if (pll_ctl_val & 0x10) {
+			/* PLL enabled, apply multiplier and divisor */
+			if (pll_ctl_val & 0xf80)
+				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
+			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
+		} else {
+			/* PLL disabled, apply bypass divisor */
+			switch (pll_ctl_val & 0xc) {
+			case 0:
+				break;
+			case 0x4:
+				ck_dpll1.rate /= 2;
+				break;
+			default:
+				ck_dpll1.rate /= 4;
+				break;
+			}
+		}
+	}
+	propagate_rate(&ck_dpll1);
+#else
+	/* Find the highest supported frequency and enable it */
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+		printk(KERN_ERR "System frequencies not set. Check your config.\n");
+		/* Guess sane values (60MHz) */
+		omap_writew(0x2290, DPLL_CTL);
+		omap_writew(0x1005, ARM_CKCTL);
+		ck_dpll1.rate = 60000000;
+		propagate_rate(&ck_dpll1);
+	}
+#endif
+	/* Cache rates for clocks connected to ck_ref (not dpll1) */
+	propagate_rate(&ck_ref);
+	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
+		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+	/* Select slicer output as OMAP input clock */
+	omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
+#endif
+
+	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
+	omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+
+	/* Put DSP/MPUI into reset until needed */
+	omap_writew(0, ARM_RSTCT1);
+	omap_writew(1, ARM_RSTCT2);
+	omap_writew(0x400, ARM_IDLECT1);
+
+	/*
+	 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
+	 * of the ARM_IDLECT2 register must be set to zero. The power-on
+	 * default value of this bit is one.
+	 */
+	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_use(&armper_ck.clk);
+	clk_use(&armxor_ck.clk);
+	clk_use(&armtim_ck.clk); /* This should be done by timer code */
+
+	if (cpu_is_omap1510())
+		clk_enable(&arm_gpio_ck);
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
new file mode 100644
index 000000000000..f3bdfb50e01a
--- /dev/null
+++ b/arch/arm/mach-omap1/clock.h
@@ -0,0 +1,768 @@
+/*
+ *  linux/arch/arm/mach-omap1/clock.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
+#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
+
+static int omap1_clk_enable(struct clk * clk);
+static void omap1_clk_disable(struct clk * clk);
+static void omap1_ckctl_recalc(struct clk * clk);
+static void omap1_watchdog_recalc(struct clk * clk);
+static void omap1_ckctl_recalc_dsp_domain(struct clk * clk);
+static int omap1_clk_enable_dsp_domain(struct clk * clk);
+static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
+static void omap1_clk_disable_dsp_domain(struct clk * clk);
+static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
+static void omap1_uart_recalc(struct clk * clk);
+static int omap1_clk_enable_uart_functional(struct clk * clk);
+static void omap1_clk_disable_uart_functional(struct clk * clk);
+static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
+static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
+static void omap1_init_ext_clk(struct clk * clk);
+static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
+static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
+static int omap1_clk_use(struct clk *clk);
+static void omap1_clk_unuse(struct clk *clk);
+
+struct mpu_rate {
+	unsigned long		rate;
+	unsigned long		xtal;
+	unsigned long		pll_rate;
+	__u16			ckctl_val;
+	__u16			dpllctl_val;
+};
+
+struct uart_clk {
+	struct clk	clk;
+	unsigned long	sysc_addr;
+};
+
+/* Provide a method for preventing idling some ARM IDLECT clocks */
+struct arm_idlect1_clk {
+	struct clk	clk;
+	unsigned long	no_idle_count;
+	__u8		idlect_shift;
+};
+
+/* ARM_CKCTL bit shifts */
+#define CKCTL_PERDIV_OFFSET	0
+#define CKCTL_LCDDIV_OFFSET	2
+#define CKCTL_ARMDIV_OFFSET	4
+#define CKCTL_DSPDIV_OFFSET	6
+#define CKCTL_TCDIV_OFFSET	8
+#define CKCTL_DSPMMUDIV_OFFSET	10
+/*#define ARM_TIMXO		12*/
+#define EN_DSPCK		13
+/*#define ARM_INTHCK_SEL	14*/ /* Divide-by-2 for mpu inth_ck */
+/* DSP_CKCTL bit shifts */
+#define CKCTL_DSPPERDIV_OFFSET	0
+
+/* ARM_IDLECT2 bit shifts */
+#define EN_WDTCK	0
+#define EN_XORPCK	1
+#define EN_PERCK	2
+#define EN_LCDCK	3
+#define EN_LBCK		4 /* Not on 1610/1710 */
+/*#define EN_HSABCK	5*/
+#define EN_APICK	6
+#define EN_TIMCK	7
+#define DMACK_REQ	8
+#define EN_GPIOCK	9 /* Not on 1610/1710 */
+/*#define EN_LBFREECK	10*/
+#define EN_CKOUT_ARM	11
+
+/* ARM_IDLECT3 bit shifts */
+#define EN_OCPI_CK	0
+#define EN_TC1_CK	2
+#define EN_TC2_CK	4
+
+/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
+#define EN_DSPTIMCK	5
+
+/* Various register defines for clock controls scattered around OMAP chip */
+#define USB_MCLK_EN_BIT		4	/* In ULPD_CLKC_CTRL */
+#define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */
+#define SWD_ULPD_PLL_CLK_REQ	1	/* In SWD_CLK_DIV_CTRL_SEL */
+#define COM_ULPD_PLL_CLK_REQ	1	/* In COM_CLK_DIV_CTRL_SEL */
+#define SWD_CLK_DIV_CTRL_SEL	0xfffe0874
+#define COM_CLK_DIV_CTRL_SEL	0xfffe0878
+#define SOFT_REQ_REG		0xfffe0834
+#define SOFT_REQ_REG2		0xfffe0880
+
+/*-------------------------------------------------------------------------
+ * Omap1 MPU rate table
+ *-------------------------------------------------------------------------*/
+static struct mpu_rate rate_table[] = {
+	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
+	 * NOTE: Comment order here is different from bits in CKCTL value:
+	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
+	 */
+#if defined(CONFIG_OMAP_ARM_216MHZ)
+	{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_195MHZ)
+	{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_192MHZ)
+	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
+	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
+	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
+	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
+	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_182MHZ)
+	{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_168MHZ)
+	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_150MHZ)
+	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
+#endif
+#if defined(CONFIG_OMAP_ARM_120MHZ)
+	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
+#endif
+#if defined(CONFIG_OMAP_ARM_96MHZ)
+	{  96000000, 12000000,  96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
+#endif
+#if defined(CONFIG_OMAP_ARM_60MHZ)
+	{  60000000, 12000000,  60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
+#endif
+#if defined(CONFIG_OMAP_ARM_30MHZ)
+	{  30000000, 12000000,  60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
+#endif
+	{ 0, 0, 0, 0, 0 },
+};
+
+/*-------------------------------------------------------------------------
+ * Omap1 clocks
+ *-------------------------------------------------------------------------*/
+
+static struct clk ck_ref = {
+	.name		= "ck_ref",
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  ALWAYS_ENABLED,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk ck_dpll1 = {
+	.name		= "ck_dpll1",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_PROPAGATES | ALWAYS_ENABLED,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk ck_dpll1out = {
+	.clk = {
+	       	.name		= "ck_dpll1out",
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_CKOUT_ARM,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 12,
+};
+
+static struct clk arm_ck = {
+	.name		= "arm_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.rate_offset	= CKCTL_ARMDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk armper_ck = {
+	.clk = {
+		.name		= "armper_ck",
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  RATE_CKCTL | CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_PERCK,
+		.rate_offset	= CKCTL_PERDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 2,
+};
+
+static struct clk arm_gpio_ck = {
+	.name		= "arm_gpio_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510,
+	.enable_reg	= (void __iomem *)ARM_IDLECT2,
+	.enable_bit	= EN_GPIOCK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk armxor_ck = {
+	.clk = {
+		.name		= "armxor_ck",
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_XORPCK,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 1,
+};
+
+static struct arm_idlect1_clk armtim_ck = {
+	.clk = {
+		.name		= "armtim_ck",
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_TIMCK,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 9,
+};
+
+static struct arm_idlect1_clk armwdt_ck = {
+	.clk = {
+		.name		= "armwdt_ck",
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_WDTCK,
+		.recalc		= &omap1_watchdog_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 0,
+};
+
+static struct clk arminth_ck16xx = {
+	.name		= "arminth_ck",
+	.parent		= &arm_ck,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	/* Note: On 16xx the frequency can be divided by 2 by programming
+	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
+	 *
+	 * 1510 version is in TC clocks.
+	 */
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dsp_ck = {
+	.name		= "dsp_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL,
+	.enable_reg	= (void __iomem *)ARM_CKCTL,
+	.enable_bit	= EN_DSPCK,
+	.rate_offset	= CKCTL_DSPDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dspmmu_ck = {
+	.name		= "dspmmu_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL | ALWAYS_ENABLED,
+	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dspper_ck = {
+	.name		= "dspper_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL | VIRTUAL_IO_ADDRESS,
+	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_bit	= EN_PERCK,
+	.rate_offset	= CKCTL_PERDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc_dsp_domain,
+	.set_rate	= &omap1_clk_set_rate_dsp_domain,
+	.enable		= &omap1_clk_enable_dsp_domain,
+	.disable	= &omap1_clk_disable_dsp_domain,
+};
+
+static struct clk dspxor_ck = {
+	.name		= "dspxor_ck",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  VIRTUAL_IO_ADDRESS,
+	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_bit	= EN_XORPCK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable_dsp_domain,
+	.disable	= &omap1_clk_disable_dsp_domain,
+};
+
+static struct clk dsptim_ck = {
+	.name		= "dsptim_ck",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  VIRTUAL_IO_ADDRESS,
+	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_bit	= EN_DSPTIMCK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable_dsp_domain,
+	.disable	= &omap1_clk_disable_dsp_domain,
+};
+
+/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
+static struct arm_idlect1_clk tc_ck = {
+	.clk = {
+		.name		= "tc_ck",
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IN_OMAP730 | RATE_CKCTL |
+				  RATE_PROPAGATES | ALWAYS_ENABLED |
+				  CLOCK_IDLE_CONTROL,
+		.rate_offset	= CKCTL_TCDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 6,
+};
+
+static struct clk arminth_ck1510 = {
+	.name		= "arminth_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	/* Note: On 1510 the frequency follows TC_CK
+	 *
+	 * 16xx version is in MPU clocks.
+	 */
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk tipb_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "tibp_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk l3_ocpi_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "l3_ocpi_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_bit	= EN_OCPI_CK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk tc1_ck = {
+	.name		= "tc1_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_bit	= EN_TC1_CK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk tc2_ck = {
+	.name		= "tc2_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_bit	= EN_TC2_CK,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dma_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "dma_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk dma_lcdfree_ck = {
+	.name		= "dma_lcdfree_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk api_ck = {
+	.clk = {
+		.name		= "api_ck",
+		.parent		= &tc_ck.clk,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_APICK,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 8,
+};
+
+static struct arm_idlect1_clk lb_ck = {
+	.clk = {
+		.name		= "lb_ck",
+		.parent		= &tc_ck.clk,
+		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_LBCK,
+		.recalc		= &followparent_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 4,
+};
+
+static struct clk rhea1_ck = {
+	.name		= "rhea1_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk rhea2_ck = {
+	.name		= "rhea2_ck",
+	.parent		= &tc_ck.clk,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk lcd_ck_16xx = {
+	.name		= "lcd_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL,
+	.enable_reg	= (void __iomem *)ARM_IDLECT2,
+	.enable_bit	= EN_LCDCK,
+	.rate_offset	= CKCTL_LCDDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct arm_idlect1_clk lcd_ck_1510 = {
+	.clk = {
+		.name		= "lcd_ck",
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IN_OMAP1510 | RATE_CKCTL |
+				  CLOCK_IDLE_CONTROL,
+		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_bit	= EN_LCDCK,
+		.rate_offset	= CKCTL_LCDDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.enable		= &omap1_clk_enable,
+		.disable	= &omap1_clk_disable,
+	},
+	.idlect_shift	= 3,
+};
+
+static struct clk uart1_1510 = {
+	.name		= "uart1_ck",
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT |
+			  ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct uart_clk uart1_16xx = {
+	.clk	= {
+		.name		= "uart1_ck",
+		/* Direct from ULPD, no real parent */
+		.parent		= &armper_ck.clk,
+		.rate		= 48000000,
+		.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED |
+				  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+		.enable_bit	= 29,
+		.enable		= &omap1_clk_enable_uart_functional,
+		.disable	= &omap1_clk_disable_uart_functional,
+	},
+	.sysc_addr	= 0xfffb0054,
+};
+
+static struct clk uart2_ck = {
+	.name		= "uart2_ck",
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  ENABLE_REG_32BIT | ALWAYS_ENABLED |
+			  CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk uart3_1510 = {
+	.name		= "uart3_ck",
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT |
+			  ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct uart_clk uart3_16xx = {
+	.clk	= {
+		.name		= "uart3_ck",
+		/* Direct from ULPD, no real parent */
+		.parent		= &armper_ck.clk,
+		.rate		= 48000000,
+		.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED |
+				  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+		.enable_bit	= 31,
+		.enable		= &omap1_clk_enable_uart_functional,
+		.disable	= &omap1_clk_disable_uart_functional,
+	},
+	.sysc_addr	= 0xfffb9854,
+};
+
+static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
+	.name		= "usb_clko",
+	/* Direct from ULPD, no parent */
+	.rate		= 6000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= (void __iomem *)ULPD_CLOCK_CTRL,
+	.enable_bit	= USB_MCLK_EN_BIT,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk usb_hhc_ck1510 = {
+	.name		= "usb_hhc_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
+	.flags		= CLOCK_IN_OMAP1510 |
+			  RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= USB_HOST_HHC_UHOST_EN,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk usb_hhc_ck16xx = {
+	.name		= "usb_hhc_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
+	.flags		= CLOCK_IN_OMAP16XX |
+			  RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */,
+	.enable_bit	= 8 /* UHOST_EN */,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk usb_dc_ck = {
+	.name		= "usb_dc_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED,
+	.enable_reg	= (void __iomem *)SOFT_REQ_REG,
+	.enable_bit	= 4,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk mclk_1510 = {
+	.name		= "mclk",
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk mclk_16xx = {
+	.name		= "mclk",
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)COM_CLK_DIV_CTRL_SEL,
+	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
+	.set_rate	= &omap1_set_ext_clk_rate,
+	.round_rate	= &omap1_round_ext_clk_rate,
+	.init		= &omap1_init_ext_clk,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk bclk_1510 = {
+	.name		= "bclk",
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk bclk_16xx = {
+	.name		= "bclk",
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.flags		= CLOCK_IN_OMAP16XX,
+	.enable_reg	= (void __iomem *)SWD_CLK_DIV_CTRL_SEL,
+	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
+	.set_rate	= &omap1_set_ext_clk_rate,
+	.round_rate	= &omap1_round_ext_clk_rate,
+	.init		= &omap1_init_ext_clk,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk mmc1_ck = {
+	.name		= "mmc1_ck",
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 23,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk mmc2_ck = {
+	.name		= "mmc2_ck",
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP16XX |
+			  RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_bit	= 20,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk virtual_ck_mpu = {
+	.name		= "mpu",
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  VIRTUAL_CLOCK | ALWAYS_ENABLED,
+	.parent		= &arm_ck, /* Is smarter alias for */
+	.recalc		= &followparent_recalc,
+	.set_rate	= &omap1_select_table_rate,
+	.round_rate	= &omap1_round_to_table_rate,
+	.enable		= &omap1_clk_enable,
+	.disable	= &omap1_clk_disable,
+};
+
+static struct clk * onchip_clks[] = {
+	/* non-ULPD clocks */
+	&ck_ref,
+	&ck_dpll1,
+	/* CK_GEN1 clocks */
+	&ck_dpll1out.clk,
+	&arm_ck,
+	&armper_ck.clk,
+	&arm_gpio_ck,
+	&armxor_ck.clk,
+	&armtim_ck.clk,
+	&armwdt_ck.clk,
+	&arminth_ck1510,  &arminth_ck16xx,
+	/* CK_GEN2 clocks */
+	&dsp_ck,
+	&dspmmu_ck,
+	&dspper_ck,
+	&dspxor_ck,
+	&dsptim_ck,
+	/* CK_GEN3 clocks */
+	&tc_ck.clk,
+	&tipb_ck,
+	&l3_ocpi_ck,
+	&tc1_ck,
+	&tc2_ck,
+	&dma_ck,
+	&dma_lcdfree_ck,
+	&api_ck.clk,
+	&lb_ck.clk,
+	&rhea1_ck,
+	&rhea2_ck,
+	&lcd_ck_16xx,
+	&lcd_ck_1510.clk,
+	/* ULPD clocks */
+	&uart1_1510,
+	&uart1_16xx.clk,
+	&uart2_ck,
+	&uart3_1510,
+	&uart3_16xx.clk,
+	&usb_clko,
+	&usb_hhc_ck1510, &usb_hhc_ck16xx,
+	&usb_dc_ck,
+	&mclk_1510,  &mclk_16xx,
+	&bclk_1510,  &bclk_16xx,
+	&mmc1_ck,
+	&mmc2_ck,
+	/* Virtual clocks */
+	&virtual_ck_mpu,
+};
+
+#endif
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 3c5d901efeaa..ecbc47514adc 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -25,56 +25,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/gpio.h>
 
-
-static void omap_nop_release(struct device *dev)
-{
-        /* Nothing */
-}
-
-/*-------------------------------------------------------------------------*/
-
-#if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define	OMAP_I2C_BASE		0xfffb3800
-
-static struct resource i2c_resources[] = {
-	{
-		.start		= OMAP_I2C_BASE,
-		.end		= OMAP_I2C_BASE + 0x3f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_I2C,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-/* DMA not used; works around erratum writing to non-empty i2c fifo */
-
-static struct platform_device omap_i2c_device = {
-        .name           = "i2c_omap",
-        .id             = -1,
-        .dev = {
-                .release        = omap_nop_release,
-        },
-	.num_resources	= ARRAY_SIZE(i2c_resources),
-	.resource	= i2c_resources,
-};
-
-static void omap_init_i2c(void)
-{
-	/* FIXME define and use a boot tag, in case of boards that
-	 * either don't wire up I2C, or chips that mux it differently...
-	 * it can include clocking and address info, maybe more.
-	 */
-	omap_cfg_reg(I2C_SCL);
-	omap_cfg_reg(I2C_SDA);
-
-	(void) platform_device_register(&omap_i2c_device);
-}
-#else
-static inline void omap_init_i2c(void) {}
-#endif
+extern void omap_nop_release(struct device *dev);
 
 /*-------------------------------------------------------------------------*/
 
@@ -110,137 +61,6 @@ static inline void omap_init_irda(void) {}
 
 /*-------------------------------------------------------------------------*/
 
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-#define	OMAP_MMC1_BASE		0xfffb7800
-#define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
-
-static struct omap_mmc_conf mmc1_conf;
-
-static u64 mmc1_dmamask = 0xffffffff;
-
-static struct resource mmc1_resources[] = {
-	{
-		.start		= IO_ADDRESS(OMAP_MMC1_BASE),
-		.end		= IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_MMC,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mmc_omap_device1 = {
-	.name		= "mmci-omap",
-	.id		= 1,
-	.dev = {
-		.release	= omap_nop_release,
-		.dma_mask	= &mmc1_dmamask,
-		.platform_data	= &mmc1_conf,
-	},
-	.num_resources	= ARRAY_SIZE(mmc1_resources),
-	.resource	= mmc1_resources,
-};
-
-#ifdef	CONFIG_ARCH_OMAP16XX
-
-static struct omap_mmc_conf mmc2_conf;
-
-static u64 mmc2_dmamask = 0xffffffff;
-
-static struct resource mmc2_resources[] = {
-	{
-		.start		= IO_ADDRESS(OMAP_MMC2_BASE),
-		.end		= IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_1610_MMC2,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mmc_omap_device2 = {
-	.name		= "mmci-omap",
-	.id		= 2,
-	.dev = {
-		.release	= omap_nop_release,
-		.dma_mask	= &mmc2_dmamask,
-		.platform_data	= &mmc2_conf,
-	},
-	.num_resources	= ARRAY_SIZE(mmc2_resources),
-	.resource	= mmc2_resources,
-};
-#endif
-
-static void __init omap_init_mmc(void)
-{
-	const struct omap_mmc_config	*mmc_conf;
-	const struct omap_mmc_conf	*mmc;
-
-	/* NOTE:  assumes MMC was never (wrongly) enabled */
-	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
-	if (!mmc_conf)
-		return;
-
-	/* block 1 is always available and has just one pinout option */
-	mmc = &mmc_conf->mmc[0];
-	if (mmc->enabled) {
-		omap_cfg_reg(MMC_CMD);
-		omap_cfg_reg(MMC_CLK);
-		omap_cfg_reg(MMC_DAT0);
-		if (cpu_is_omap1710()) {
-	              omap_cfg_reg(M15_1710_MMC_CLKI);
-	              omap_cfg_reg(P19_1710_MMC_CMDDIR);
-	              omap_cfg_reg(P20_1710_MMC_DATDIR0);
-	        }
-		if (mmc->wire4) {
-			omap_cfg_reg(MMC_DAT1);
-			/* NOTE:  DAT2 can be on W10 (here) or M15 */
-			if (!mmc->nomux)
-				omap_cfg_reg(MMC_DAT2);
-			omap_cfg_reg(MMC_DAT3);
-		}
-		mmc1_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device1);
-	}
-
-#ifdef	CONFIG_ARCH_OMAP16XX
-	/* block 2 is on newer chips, and has many pinout options */
-	mmc = &mmc_conf->mmc[1];
-	if (mmc->enabled) {
-		if (!mmc->nomux) {
-			omap_cfg_reg(Y8_1610_MMC2_CMD);
-			omap_cfg_reg(Y10_1610_MMC2_CLK);
-			omap_cfg_reg(R18_1610_MMC2_CLKIN);
-			omap_cfg_reg(W8_1610_MMC2_DAT0);
-			if (mmc->wire4) {
-				omap_cfg_reg(V8_1610_MMC2_DAT1);
-				omap_cfg_reg(W15_1610_MMC2_DAT2);
-				omap_cfg_reg(R10_1610_MMC2_DAT3);
-			}
-
-			/* These are needed for the level shifter */
-			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
-			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
-			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
-		}
-
-		/* Feedback clock must be set on OMAP-1710 MMC2 */
-		if (cpu_is_omap1710())
-			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
-				     MOD_CONF_CTRL_1);
-		mmc2_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device2);
-	}
-#endif
-	return;
-}
-#else
-static inline void omap_init_mmc(void) {}
-#endif
-
 #if	defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC)
 
 #define	OMAP_RTC_BASE		0xfffb4800
@@ -279,38 +99,6 @@ static void omap_init_rtc(void)
 static inline void omap_init_rtc(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-#if	defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE)
-
-#define	OMAP_WDT_BASE		0xfffeb000
-
-static struct resource wdt_resources[] = {
-	{
-		.start		= OMAP_WDT_BASE,
-		.end		= OMAP_WDT_BASE + 0x4f,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_wdt_device = {
-	.name	   = "omap1610_wdt",
-	.id	     = -1,
-	.dev = {
-		.release	= omap_nop_release,
-	},
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-static void omap_init_wdt(void)
-{
-	(void) platform_device_register(&omap_wdt_device);
-}
-#else
-static inline void omap_init_wdt(void) {}
-#endif
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -334,18 +122,15 @@ static inline void omap_init_wdt(void) {}
  * may be handled by the boot loader, and drivers should expect it will
  * normally have been done by the time they're probed.
  */
-static int __init omap_init_devices(void)
+static int __init omap1_init_devices(void)
 {
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
-	omap_init_i2c();
 	omap_init_irda();
-	omap_init_mmc();
 	omap_init_rtc();
-	omap_init_wdt();
 
 	return 0;
 }
-arch_initcall(omap_init_devices);
+arch_initcall(omap1_init_devices);
 
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 986c3b7e09bb..5c637c048368 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -18,6 +18,13 @@
 
 #include <asm/io.h>
 
+#define OMAP_DIE_ID_0		0xfffe1800
+#define OMAP_DIE_ID_1		0xfffe1804
+#define OMAP_PRODUCTION_ID_0	0xfffe2000
+#define OMAP_PRODUCTION_ID_1	0xfffe2004
+#define OMAP32_ID_0		0xfffed400
+#define OMAP32_ID_1		0xfffed404
+
 struct omap_id {
 	u16	jtag_id;	/* Used to determine OMAP type */
 	u8	die_rev;	/* Processor revision */
@@ -27,6 +34,7 @@ struct omap_id {
 
 /* Register values to detect the OMAP version */
 static struct omap_id omap_ids[] __initdata = {
+	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
 	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
 	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
 	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
@@ -164,6 +172,7 @@ void __init omap_check_revision(void)
 	case 0x07:
 		system_rev |= 0x07;
 		break;
+	case 0x03:
 	case 0x15:
 		system_rev |= 0x15;
 		break;
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 79fb86535ebc..a7a19f75b9e1 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,9 +15,10 @@
 
 #include <asm/mach/map.h>
 #include <asm/io.h>
+#include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
 
-extern int clk_init(void);
+extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
 extern void omap_sram_init(void);
 
@@ -50,7 +51,7 @@ static struct map_desc omap730_io_desc[] __initdata = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct map_desc omap1510_io_desc[] __initdata = {
 	{
 		.virtual	= OMAP1510_DSP_BASE,
@@ -98,7 +99,7 @@ static void __init _omap_map_io(void)
 		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
 	}
@@ -119,7 +120,7 @@ static void __init _omap_map_io(void)
 
 	/* Must init clocks early to assure that timer interrupt works
 	 */
-	clk_init();
+	omap1_clk_init();
 }
 
 /*
@@ -127,7 +128,9 @@ static void __init _omap_map_io(void)
  */
 void __init omap_map_common_io(void)
 {
-	if (!initialized)
+	if (!initialized) {
 		_omap_map_io();
+		omap1_mux_init();
+	}
 }
 
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 192ce6055faa..ed65a7d2e941 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -47,6 +47,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
 
 #include <asm/io.h>
 
@@ -147,11 +148,15 @@ static struct omap_irq_bank omap730_irq_banks[] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_irq_bank omap1510_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE, 		.trigger_map = 0xb3febfff },
 	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0xffbfffed },
 };
+static struct omap_irq_bank omap310_irq_banks[] = {
+	{ .base_reg = OMAP_IH1_BASE, 		.trigger_map = 0xb3faefc3 },
+	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0x65b3c061 },
+};
 #endif
 
 #if defined(CONFIG_ARCH_OMAP16XX)
@@ -181,11 +186,15 @@ void __init omap_init_irq(void)
 		irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		irq_banks = omap1510_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
 	}
+	if (cpu_is_omap310()) {
+		irq_banks = omap310_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
+	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap16xx()) {
@@ -226,9 +235,11 @@ void __init omap_init_irq(void)
 	}
 
 	/* Unmask level 2 handler */
-	if (cpu_is_omap730()) {
+
+	if (cpu_is_omap730())
 		omap_unmask_irq(INT_730_IH2_IRQ);
-	} else {
-		omap_unmask_irq(INT_IH2_IRQ);
-	}
+	else if (cpu_is_omap1510())
+		omap_unmask_irq(INT_1510_IH2_IRQ);
+	else if (cpu_is_omap16xx())
+		omap_unmask_irq(INT_1610_IH2_IRQ);
 }
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 399010c14036..650650815915 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -18,6 +18,7 @@
 #include <asm/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
+#include <asm/mach-types.h>
 
 #include <asm/arch/fpga.h>
 #include <asm/arch/gpio.h>
@@ -63,14 +64,19 @@ void h2p2_dbg_leds_event(led_event_t evt)
 	case led_stop:
 	case led_halted:
 		/* all leds off during suspend or shutdown */
-		omap_set_gpio_dataout(GPIO_TIMER, 0);
-		omap_set_gpio_dataout(GPIO_IDLE, 0);
+
+		if (! machine_is_omap_perseus2()) {
+			omap_set_gpio_dataout(GPIO_TIMER, 0);
+			omap_set_gpio_dataout(GPIO_IDLE, 0);
+		}
+
 		__raw_writew(~0, &fpga->leds);
 		led_state &= ~LED_STATE_ENABLED;
 		if (evt == led_halted) {
 			iounmap(fpga);
 			fpga = NULL;
 		}
+
 		goto done;
 
 	case led_claim:
@@ -85,18 +91,37 @@ void h2p2_dbg_leds_event(led_event_t evt)
 #ifdef CONFIG_LEDS_TIMER
 	case led_timer:
 		led_state ^= LED_TIMER_ON;
-		omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON);
-		goto done;
+
+		if (machine_is_omap_perseus2())
+			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
+		else {
+			omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON);
+			goto done;
+		}
+
+		break;
 #endif
 
 #ifdef CONFIG_LEDS_CPU
 	case led_idle_start:
-		omap_set_gpio_dataout(GPIO_IDLE, 1);
-		goto done;
+		if (machine_is_omap_perseus2())
+			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
+		else {
+			omap_set_gpio_dataout(GPIO_IDLE, 1);
+			goto done;
+		}
+
+		break;
 
 	case led_idle_end:
-		omap_set_gpio_dataout(GPIO_IDLE, 0);
-		goto done;
+		if (machine_is_omap_perseus2())
+			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
+		else {
+			omap_set_gpio_dataout(GPIO_IDLE, 0);
+			goto done;
+		}
+
+		break;
 #endif
 
 	case led_green_on:
@@ -135,7 +160,7 @@ void h2p2_dbg_leds_event(led_event_t evt)
 	/*
 	 *  Actually burn the LEDs
 	 */
-	if (led_state & LED_STATE_CLAIMED)
+	if (led_state & LED_STATE_ENABLED)
 		__raw_writew(~hw_led_state, &fpga->leds);
 
 done:
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 5c6b1bb6e722..3f9dcac4fd41 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -33,7 +33,6 @@ omap_leds_init(void)
 
 	if (machine_is_omap_h2()
 			|| machine_is_omap_h3()
-			|| machine_is_omap_perseus2()
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 			|| machine_is_omap_osk()
 #endif
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
new file mode 100644
index 000000000000..d4b8d624e742
--- /dev/null
+++ b/arch/arm/mach-omap1/mux.c
@@ -0,0 +1,289 @@
+/*
+ * linux/arch/arm/mach-omap1/mux.c
+ *
+ * OMAP1 pin multiplexing configurations
+ *
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+#include <asm/arch/mux.h>
+
+#ifdef CONFIG_OMAP_MUX
+
+#ifdef CONFIG_ARCH_OMAP730
+struct pin_config __initdata_or_module omap730_pins[] = {
+MUX_CFG_730("E2_730_KBR0",	12,   21,    0,	  0,   20,   1,	  NA,	 0,  0)
+MUX_CFG_730("J7_730_KBR1",	12,   25,    0,	  0,   24,   1,	  NA,	 0,  0)
+MUX_CFG_730("E1_730_KBR2",	12,   29,    0,	  0,   28,   1,	  NA,	 0,  0)
+MUX_CFG_730("F3_730_KBR3",	13,    1,    0,	  0,   0,    1,	  NA,	 0,  0)
+MUX_CFG_730("D2_730_KBR4",	13,    5,    0,	  0,   4,    1,	  NA,	 0,  0)
+MUX_CFG_730("C2_730_KBC0",	13,    9,    0,	  0,	8,   1,	  NA,	 0,  0)
+MUX_CFG_730("D3_730_KBC1",	13,   13,    0,	  0,   12,   1,	  NA,	 0,  0)
+MUX_CFG_730("E4_730_KBC2",	13,   17,    0,	  0,   16,   1,	  NA,	 0,  0)
+MUX_CFG_730("F4_730_KBC3",	13,   21,    0,	  0,   20,   1,	  NA,	 0,  0)
+MUX_CFG_730("E3_730_KBC4",	13,   25,    0,	  0,   24,   1,	  NA,	 0,  0)
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
+struct pin_config __initdata_or_module omap1xxx_pins[] = {
+/*
+ *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
+ *				reg  offset mode reg  bit   ena	  reg
+ */
+MUX_CFG("UART1_TX",		 9,   21,    1,	  2,   3,   0,	 NA,	 0,  0)
+MUX_CFG("UART1_RTS",		 9,   12,    1,	  2,   0,   0,	 NA,	 0,  0)
+
+/* UART2 (COM_UART_GATING), conflicts with USB2 */
+MUX_CFG("UART2_TX",		 C,   27,    1,	  3,   3,   0,	 NA,	 0,  0)
+MUX_CFG("UART2_RX",		 C,   18,    0,	  3,   1,   1,	 NA,	 0,  0)
+MUX_CFG("UART2_CTS",		 C,   21,    0,	  3,   1,   1,	 NA,	 0,  0)
+MUX_CFG("UART2_RTS",		 C,   24,    1,	  3,   2,   0,	 NA,	 0,  0)
+
+/* UART3 (GIGA_UART_GATING) */
+MUX_CFG("UART3_TX",		 6,    0,    1,	  0,  30,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_RX",		 6,    3,    0,	  0,  31,   1,	 NA,	 0,  0)
+MUX_CFG("UART3_CTS",		 5,   12,    2,	  0,  24,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_RTS",		 5,   15,    2,	  0,  25,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_CLKREQ",		 9,   27,    0,	  2,   5,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_BCLK",		 A,    0,    0,	  2,   6,   0,	 NA,	 0,  0)
+MUX_CFG("Y15_1610_UART3_RTS",	 A,    0,    1,	  2,   6,   0,	 NA,	 0,  0)
+
+/* PWT & PWL, conflicts with UART3 */
+MUX_CFG("PWT",		 	 6,    0,    2,	  0,  30,   0,	 NA,	 0,  0)
+MUX_CFG("PWL",		 	 6,    3,    1,	  0,  31,   1,	 NA,	 0,  0)
+
+/* USB internal master generic */
+MUX_CFG("R18_USB_VBUS",		 7,    9,    2,	  1,  11,   0,	 NA,	 0,  1)
+MUX_CFG("R18_1510_USB_GPIO0",	 7,    9,    0,	  1,  11,   1,	 NA,	 0,  1)
+/* works around erratum:  W4_USB_PUEN and W4_USB_PUDIS are switched! */
+MUX_CFG("W4_USB_PUEN",		 D,    3,    3,	  3,   5,   1,	 NA,	 0,  1)
+MUX_CFG("W4_USB_CLKO",		 D,    3,    1,	  3,   5,   0,	 NA,	 0,  1)
+MUX_CFG("W4_USB_HIGHZ",		 D,    3,    4,	  3,   5,   0,	  3,	 0,  1)
+MUX_CFG("W4_GPIO58",		 D,    3,    7,	  3,   5,   0,	  3,	 0,  1)
+
+/* USB1 master */
+MUX_CFG("USB1_SUSP",		 8,   27,    2,	  1,  27,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_SE0",		 9,    0,    2,	  1,  28,   0,	 NA,	 0,  1)
+MUX_CFG("W13_1610_USB1_SE0",	 9,    0,    4,	  1,  28,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_TXEN",		 9,    3,    2,	  1,  29,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_TXD",		 9,   24,    1,	  2,   4,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_VP",		 A,    3,    1,	  2,   7,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_VM",		 A,    6,    1,	  2,   8,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_RCV",		 A,    9,    1,	  2,   9,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_SPEED",		 A,   12,    2,	  2,  10,   0,	 NA,	 0,  1)
+MUX_CFG("R13_1610_USB1_SPEED",	 A,   12,    5,	  2,  10,   0,	 NA,	 0,  1)
+MUX_CFG("R13_1710_USB1_SEO",	 A,   12,    5,   2,  10,   0,   NA,     0,  1)
+
+/* USB2 master */
+MUX_CFG("USB2_SUSP",		 B,    3,    1,	  2,  17,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_VP",		 B,    6,    1,	  2,  18,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_TXEN",		 B,    9,    1,	  2,  19,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_VM",		 C,   18,    1,	  3,   0,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_RCV",		 C,   21,    1,	  3,   1,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_SE0",		 C,   24,    2,	  3,   2,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_TXD",		 C,   27,    2,	  3,   3,   0,	 NA,	 0,  1)
+
+/* OMAP-1510 GPIO */
+MUX_CFG("R18_1510_GPIO0",	 7,    9,    0,   1,  11,   1,    0,     0,  1)
+MUX_CFG("R19_1510_GPIO1",	 7,    6,    0,   1,  10,   1,    0,     0,  1)
+MUX_CFG("M14_1510_GPIO2",	 7,    3,    0,   1,   9,   1,    0,     0,  1)
+
+/* OMAP1610 GPIO */
+MUX_CFG("P18_1610_GPIO3",	 7,    0,    0,   1,   8,   0,   NA,     0,  1)
+MUX_CFG("Y15_1610_GPIO17",	 A,    0,    7,   2,   6,   0,   NA,     0,  1)
+
+/* OMAP-1710 GPIO */
+MUX_CFG("R18_1710_GPIO0",        7,    9,    0,   1,  11,   1,    1,     1,  1)
+MUX_CFG("V2_1710_GPIO10",        F,   27,    1,   4,   3,   1,    4,     1,  1)
+MUX_CFG("N21_1710_GPIO14",       6,    9,    0,   1,   1,   1,    1,     1,  1)
+MUX_CFG("W15_1710_GPIO40",       9,   27,    7,   2,   5,   1,    2,     1,  1)
+
+/* MPUIO */
+MUX_CFG("MPUIO2",		 7,   18,    0,	  1,  14,   1,	 NA,	 0,  1)
+MUX_CFG("N15_1610_MPUIO2",	 7,   18,    0,	  1,  14,   1,	  1,	 0,  1)
+MUX_CFG("MPUIO4",		 7,   15,    0,	  1,  13,   1,	 NA,	 0,  1)
+MUX_CFG("MPUIO5",		 7,   12,    0,	  1,  12,   1,	 NA,	 0,  1)
+
+MUX_CFG("T20_1610_MPUIO5",	 7,   12,    0,	  1,  12,   0,	  3,	 0,  1)
+MUX_CFG("W11_1610_MPUIO6",	10,   15,    2,	  3,   8,   0,	  3,	 0,  1)
+MUX_CFG("V10_1610_MPUIO7",	 A,   24,    2,	  2,  14,   0,	  2,	 0,  1)
+MUX_CFG("W11_1610_MPUIO9",	10,   15,    1,	  3,   8,   0,	  3,	 0,  1)
+MUX_CFG("V10_1610_MPUIO10",	 A,   24,    1,	  2,  14,   0,	  2,	 0,  1)
+MUX_CFG("W10_1610_MPUIO11",	 A,   18,    2,	  2,  11,   0,	  2,	 0,  1)
+MUX_CFG("E20_1610_MPUIO13",	 3,   21,    1,	  0,   7,   0,	  0,	 0,  1)
+MUX_CFG("U20_1610_MPUIO14",	 9,    6,    6,	  0,  30,   0,	  0,	 0,  1)
+MUX_CFG("E19_1610_MPUIO15",	 3,   18,    1,	  0,   6,   0,	  0,	 0,  1)
+
+/* MCBSP2 */
+MUX_CFG("MCBSP2_CLKR",		 C,    6,    0,	  2,  27,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_CLKX",		 C,    9,    0,	  2,  29,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_DR",		 C,    0,    0,	  2,  26,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_DX",		 C,   15,    0,	  2,  31,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_FSR",		 C,   12,    0,	  2,  30,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_FSX",		 C,    3,    0,	  2,  27,   1,	 NA,	 0,  1)
+
+/* MCBSP3 NOTE: Mode must 1 for clock */
+MUX_CFG("MCBSP3_CLKX",		 9,    3,    1,	  1,  29,   0,	 NA,	 0,  1)
+
+/* Misc ballouts */
+MUX_CFG("BALLOUT_V8_ARMIO3",	 B,   18,    0,	  2,  25,   1,	 NA,	 0,  1)
+MUX_CFG("N20_HDQ",	       6,   18,    1,   1,   4,   0,    1,     4,  0)
+
+/* OMAP-1610 MMC2 */
+MUX_CFG("W8_1610_MMC2_DAT0",	 B,   21,    6,	  2,  23,   1,	  2,	 1,  1)
+MUX_CFG("V8_1610_MMC2_DAT1",	 B,   27,    6,	  2,  25,   1,	  2,	 1,  1)
+MUX_CFG("W15_1610_MMC2_DAT2",	 9,   12,    6,	  2,   5,   1,	  2,	 1,  1)
+MUX_CFG("R10_1610_MMC2_DAT3",	 B,   18,    6,	  2,  22,   1,	  2,	 1,  1)
+MUX_CFG("Y10_1610_MMC2_CLK",	 B,    3,    6,	  2,  17,   0,	  2,	 0,  1)
+MUX_CFG("Y8_1610_MMC2_CMD",	 B,   24,    6,	  2,  24,   1,	  2,	 1,  1)
+MUX_CFG("V9_1610_MMC2_CMDDIR",	 B,   12,    6,	  2,  20,   0,	  2,	 1,  1)
+MUX_CFG("V5_1610_MMC2_DATDIR0",	 B,   15,    6,	  2,  21,   0,	  2,	 1,  1)
+MUX_CFG("W19_1610_MMC2_DATDIR1", 8,   15,    6,	  1,  23,   0,	  1,	 1,  1)
+MUX_CFG("R18_1610_MMC2_CLKIN",	 7,    9,    6,	  1,  11,   0,	  1,	11,  1)
+
+/* OMAP-1610 External Trace Interface */
+MUX_CFG("M19_1610_ETM_PSTAT0",	 5,   27,    1,	  0,  29,   0,	  0,	 0,  1)
+MUX_CFG("L15_1610_ETM_PSTAT1",	 5,   24,    1,	  0,  28,   0,	  0,	 0,  1)
+MUX_CFG("L18_1610_ETM_PSTAT2",	 5,   21,    1,	  0,  27,   0,	  0,	 0,  1)
+MUX_CFG("L19_1610_ETM_D0",	 5,   18,    1,	  0,  26,   0,	  0,	 0,  1)
+MUX_CFG("J19_1610_ETM_D6",	 5,    0,    1,	  0,  20,   0,	  0,	 0,  1)
+MUX_CFG("J18_1610_ETM_D7",	 5,   27,    1,	  0,  19,   0,	  0,	 0,  1)
+
+/* OMAP16XX GPIO */
+MUX_CFG("P20_1610_GPIO4",	 6,   27,    0,	  1,   7,   0,	  1,	 1,  1)
+MUX_CFG("V9_1610_GPIO7",	 B,   12,    1,	  2,  20,   0,	  2,	 1,  1)
+MUX_CFG("W8_1610_GPIO9",	 B,   21,    0,	  2,  23,   0,	  2,	 1,  1)
+MUX_CFG("N20_1610_GPIO11",       6,   18,    0,   1,   4,   0,    1,     1,  1)
+MUX_CFG("N19_1610_GPIO13",	 6,   12,    0,	  1,   2,   0,	  1,	 1,  1)
+MUX_CFG("P10_1610_GPIO22",	 C,    0,    7,	  2,  26,   0,	  2,	 1,  1)
+MUX_CFG("V5_1610_GPIO24",	 B,   15,    7,	  2,  21,   0,	  2,	 1,  1)
+MUX_CFG("AA20_1610_GPIO_41",	 9,    9,    7,	  1,  31,   0,	  1,	 1,  1)
+MUX_CFG("W19_1610_GPIO48",	 8,   15,    7,   1,  23,   1,    1,     0,  1)
+MUX_CFG("M7_1610_GPIO62",	10,    0,    0,   4,  24,   0,    4,     0,  1)
+MUX_CFG("V14_16XX_GPIO37",	 9,   18,    7,	  2,   2,   0,	  2,	 2,  0)
+MUX_CFG("R9_16XX_GPIO18",	 C,   18,    7,   3,   0,   0,    3,     0,  0)
+MUX_CFG("L14_16XX_GPIO49",	 6,    3,    7,   0,  31,   0,    0,    31,  0)
+
+/* OMAP-1610 uWire */
+MUX_CFG("V19_1610_UWIRE_SCLK",	 8,    6,    0,	  1,  20,   0,	  1,	 1,  1)
+MUX_CFG("U18_1610_UWIRE_SDI",	 8,    0,    0,	  1,  18,   0,	  1,	 1,  1)
+MUX_CFG("W21_1610_UWIRE_SDO",	 8,    3,    0,	  1,  19,   0,	  1,	 1,  1)
+MUX_CFG("N14_1610_UWIRE_CS0",	 8,    9,    1,	  1,  21,   0,	  1,	 1,  1)
+MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
+MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)
+
+/* OMAP-1610 Flash */
+MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)
+
+/* First MMC interface, same on 1510, 1610 and 1710 */
+MUX_CFG("MMC_CMD",		 A,   27,    0,	  2,  15,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT1",		 A,   24,    0,	  2,  14,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT2",		 A,   18,    0,	  2,  12,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT0",		 B,    0,    0,	  2,  16,   1,	  2,	 1,  1)
+MUX_CFG("MMC_CLK",		 A,   21,    0,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("MMC_DAT3",		10,   15,    0,	  3,   8,   1,	  3,	 1,  1)
+MUX_CFG("M15_1710_MMC_CLKI",	 6,   21,    2,   0,   0,   0,   NA,     0,  1)
+MUX_CFG("P19_1710_MMC_CMDDIR",	 6,   24,    6,   0,   0,   0,   NA,     0,  1)
+MUX_CFG("P20_1710_MMC_DATDIR0",	 6,   27,    5,   0,   0,   0,   NA,     0,  1)
+
+/* OMAP-1610 USB0 alternate configuration */
+MUX_CFG("W9_USB0_TXEN",		 B,   9,     5,	  2,  19,   0,	  2,	 0,  1)
+MUX_CFG("AA9_USB0_VP",		 B,   6,     5,	  2,  18,   0,	  2,	 0,  1)
+MUX_CFG("Y5_USB0_RCV",		 C,  21,     5,	  3,   1,   0,	  1,	 0,  1)
+MUX_CFG("R9_USB0_VM",		 C,  18,     5,	  3,   0,   0,	  3,	 0,  1)
+MUX_CFG("V6_USB0_TXD",		 C,  27,     5,	  3,   3,   0,	  3,	 0,  1)
+MUX_CFG("W5_USB0_SE0",		 C,  24,     5,	  3,   2,   0,	  3,	 0,  1)
+MUX_CFG("V9_USB0_SPEED",	 B,  12,     5,	  2,  20,   0,	  2,	 0,  1)
+MUX_CFG("Y10_USB0_SUSP",	 B,   3,     5,	  2,  17,   0,	  2,	 0,  1)
+
+/* USB2 interface */
+MUX_CFG("W9_USB2_TXEN",		 B,   9,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("AA9_USB2_VP",		 B,   6,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("Y5_USB2_RCV",		 C,  21,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("R9_USB2_VM",		 C,  18,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("V6_USB2_TXD",		 C,  27,     2,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("W5_USB2_SE0",		 C,  24,     2,	 NA,   0,   0,	 NA,	 0,  1)
+
+/* 16XX UART */
+MUX_CFG("R13_1610_UART1_TX",	 A,  12,     6,	  2,  10,   0,	  2,	10,  1)
+MUX_CFG("V14_16XX_UART1_RX",	 9,  18,     0,	  2,   2,   0,	  2,	 2,  1)
+MUX_CFG("R14_1610_UART1_CTS",	 9,  15,     0,	  2,   1,   0,	  2,	 1,  1)
+MUX_CFG("AA15_1610_UART1_RTS",	 9,  12,     1,	  2,   0,   0,	  2,	 0,  1)
+MUX_CFG("R9_16XX_UART2_RX",	 C,  18,     0,   3,   0,   0,    3,     0,  1)
+MUX_CFG("L14_16XX_UART3_RX",	 6,   3,     0,   0,  31,   0,    0,    31,  1)
+
+/* I2C interface */
+MUX_CFG("I2C_SCL",		 7,  24,     0,	 NA,   0,   0,	 NA,	 0,  0)
+MUX_CFG("I2C_SDA",		 7,  27,     0,	 NA,   0,   0,	 NA,	 0,  0)
+
+/* Keypad */
+MUX_CFG("F18_1610_KBC0",	 3,  15,     0,	  0,   5,   1,	  0,	 0,  0)
+MUX_CFG("D20_1610_KBC1",	 3,  12,     0,	  0,   4,   1,	  0,	 0,  0)
+MUX_CFG("D19_1610_KBC2",	 3,   9,     0,	  0,   3,   1,	  0,	 0,  0)
+MUX_CFG("E18_1610_KBC3",	 3,   6,     0,	  0,   2,   1,	  0,	 0,  0)
+MUX_CFG("C21_1610_KBC4",	 3,   3,     0,	  0,   1,   1,	  0,	 0,  0)
+MUX_CFG("G18_1610_KBR0",	 4,   0,     0,	  0,   10,  1,	  0,	 1,  0)
+MUX_CFG("F19_1610_KBR1",	 3,   27,    0,	  0,   9,   1,	  0,	 1,  0)
+MUX_CFG("H14_1610_KBR2",	 3,   24,    0,	  0,   8,   1,	  0,	 1,  0)
+MUX_CFG("E20_1610_KBR3",	 3,   21,    0,	  0,   7,   1,	  0,	 1,  0)
+MUX_CFG("E19_1610_KBR4",	 3,   18,    0,	  0,   6,   1,	  0,	 1,  0)
+MUX_CFG("N19_1610_KBR5",	 6,  12,     1,	  1,   2,   1,	  1,	 1,  0)
+
+/* Power management */
+MUX_CFG("T20_1610_LOW_PWR",	 7,   12,    1,	  NA,   0,   0,   NA,	 0,  0)
+
+/* MCLK Settings */
+MUX_CFG("V5_1710_MCLK_ON",	 B,   15,    0,	  NA,   0,   0,   NA,	 0,  0)
+MUX_CFG("V5_1710_MCLK_OFF",	 B,   15,    6,	  NA,   0,   0,   NA,	 0,  0)
+MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0)
+MUX_CFG("R10_1610_MCLK_OFF",	 B,   18,    6,	  2,   22,   1,	  2,	 1,  1)
+
+/* CompactFlash controller, conflicts with MMC1 */
+MUX_CFG("P11_1610_CF_CD2",	 A,   27,    3,	  2,   15,   1,	  2,	 1,  1)
+MUX_CFG("R11_1610_CF_IOIS16",	 B,    0,    3,	  2,   16,   1,	  2,	 1,  1)
+MUX_CFG("V10_1610_CF_IREQ",	 A,   24,    3,	  2,   14,   0,	  2,	 0,  1)
+MUX_CFG("W10_1610_CF_RESET",	 A,   18,    3,	  2,   12,   1,	  2,	 1,  1)
+MUX_CFG("W11_1610_CF_CD1",	10,   15,    3,	  3,    8,   1,	  3,	 1,  1)
+};
+#endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
+
+int __init omap1_mux_init(void)
+{
+
+#ifdef CONFIG_ARCH_OMAP730
+	omap_mux_register(omap730_pins, ARRAY_SIZE(omap730_pins));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
+	omap_mux_register(omap1xxx_pins, ARRAY_SIZE(omap1xxx_pins));
+#endif
+
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 40c4f7c40e73..6810cfb84462 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -109,9 +109,10 @@ static struct platform_device serial_device = {
  * By default UART2 does not work on Innovator-1510 if you have
  * USB OHCI enabled. To use UART2, you must disable USB2 first.
  */
-void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
+void __init omap_serial_init(void)
 {
 	int i;
+	const struct omap_uart_config *info;
 
 	if (cpu_is_omap730()) {
 		serial_platform_data[0].regshift = 0;
@@ -126,10 +127,14 @@ void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
 		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
 	}
 
+	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
+	if (info == NULL)
+		return;
+
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		unsigned char reg;
 
-		if (ports[i] == 0) {
+		if (!((1 << i) & info->enabled_uarts)) {
 			serial_platform_data[i].membase = NULL;
 			serial_platform_data[i].mapbase = 0;
 			continue;
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 191a9b1ee9b7..cdbf4d7620c6 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -226,8 +226,8 @@ unsigned long long sched_clock(void)
 
 #ifdef CONFIG_OMAP_32K_TIMER
 
-#ifdef CONFIG_ARCH_OMAP1510
-#error OMAP 32KHz timer does not currently work on 1510!
+#ifdef CONFIG_ARCH_OMAP15XX
+#error OMAP 32KHz timer does not currently work on 15XX!
 #endif
 
 /*
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
new file mode 100644
index 000000000000..578880943cf2
--- /dev/null
+++ b/arch/arm/mach-omap2/Kconfig
@@ -0,0 +1,22 @@
+comment "OMAP Core Type"
+	depends on ARCH_OMAP2
+
+config ARCH_OMAP24XX
+	bool "OMAP24xx Based System"
+	depends on ARCH_OMAP2
+
+config ARCH_OMAP2420
+	bool "OMAP2420 support"
+	depends on ARCH_OMAP24XX
+
+comment "OMAP Board Type"
+	depends on ARCH_OMAP2
+
+config MACH_OMAP_GENERIC
+	bool "Generic OMAP board"
+	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+
+config MACH_OMAP_H4
+	bool "OMAP 2420 H4 board"
+	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
new file mode 100644
index 000000000000..42041166435c
--- /dev/null
+++ b/arch/arm/mach-omap2/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y := irq.o id.o io.o sram-fn.o clock.o mux.o devices.o serial.o
+
+obj-$(CONFIG_OMAP_MPU_TIMER)		+= timer-gp.o
+
+# Specific board support
+obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
+obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
+
diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
new file mode 100644
index 000000000000..565aff7f37a9
--- /dev/null
+++ b/arch/arm/mach-omap2/Makefile.boot
@@ -0,0 +1,3 @@
+  zreladdr-y		:= 0x80008000
+params_phys-y		:= 0x80000100
+initrd_phys-y		:= 0x80800000
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
new file mode 100644
index 000000000000..c602e7a3d93e
--- /dev/null
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -0,0 +1,80 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/board-generic.c
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * Modified from mach-omap/omap1/board-generic.c
+ *
+ * Code for generic OMAP2 board. Should work on many OMAP2 systems where
+ * the bootloader passes the board-specific data to the kernel.
+ * Do not put any board specific code to this file; create a new machine
+ * type if you need custom low-level initializations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+
+static void __init omap_generic_init_irq(void)
+{
+	omap_init_irq();
+}
+
+static struct omap_uart_config generic_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_mmc_config generic_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled 	= 0,
+		.wire4		= 0,
+		.wp_pin		= -1,
+		.power_pin	= -1,
+		.switch_pin	= -1,
+	},
+};
+
+static struct omap_board_config_kernel generic_config[] = {
+	{ OMAP_TAG_UART,	&generic_uart_config },
+	{ OMAP_TAG_MMC,		&generic_mmc_config },
+};
+
+static void __init omap_generic_init(void)
+{
+	omap_board_config = generic_config;
+	omap_board_config_size = ARRAY_SIZE(generic_config);
+	omap_serial_init();
+}
+
+static void __init omap_generic_map_io(void)
+{
+	omap_map_common_io();
+}
+
+MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
+	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+	.phys_ram	= 0x80000000,
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_generic_map_io,
+	.init_irq	= omap_generic_init_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
new file mode 100644
index 000000000000..f2554469a76a
--- /dev/null
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -0,0 +1,197 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/board-h4.c
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * Modified from mach-omap/omap1/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/arch/prcm.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+
+static struct mtd_partition h4_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* file system */
+	{
+	      .name		= "filesystem",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	}
+};
+
+static struct flash_platform_data h4_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+	.parts		= h4_partitions,
+	.nr_parts	= ARRAY_SIZE(h4_partitions),
+};
+
+static struct resource h4_flash_resource = {
+	.start		= H4_CS0_BASE,
+	.end		= H4_CS0_BASE + SZ_64M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device h4_flash_device = {
+	.name		= "omapflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &h4_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &h4_flash_resource,
+};
+
+static struct resource h4_smc91x_resources[] = {
+	[0] = {
+		.start  = OMAP24XX_ETHR_START,          /* Physical */
+		.end    = OMAP24XX_ETHR_START + 0xf,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+		.end    = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device h4_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(h4_smc91x_resources),
+	.resource	= h4_smc91x_resources,
+};
+
+static struct platform_device *h4_devices[] __initdata = {
+	&h4_smc91x_device,
+	&h4_flash_device,
+};
+
+static inline void __init h4_init_smc91x(void)
+{
+	/* Make sure CS1 timings are correct */
+	GPMC_CONFIG1_1 = 0x00011200;
+	GPMC_CONFIG2_1 = 0x001f1f01;
+	GPMC_CONFIG3_1 = 0x00080803;
+	GPMC_CONFIG4_1 = 0x1c091c09;
+	GPMC_CONFIG5_1 = 0x041f1f1f;
+	GPMC_CONFIG6_1 = 0x000004c4;
+	GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24);
+	udelay(100);
+
+	omap_cfg_reg(M15_24XX_GPIO92);
+	if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
+			OMAP24XX_ETHR_GPIO_IRQ);
+		return;
+	}
+	omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
+}
+
+static void __init omap_h4_init_irq(void)
+{
+	omap_init_irq();
+	omap_gpio_init();
+	h4_init_smc91x();
+}
+
+static struct omap_uart_config h4_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_mmc_config h4_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled	= 1,
+		.wire4		= 1,
+		.wp_pin		= -1,
+		.power_pin	= -1,
+		.switch_pin	= -1,
+	},
+};
+
+static struct omap_lcd_config h4_lcd_config __initdata = {
+	.panel_name	= "h4",
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel h4_config[] = {
+	{ OMAP_TAG_UART,	&h4_uart_config },
+	{ OMAP_TAG_MMC,		&h4_mmc_config },
+	{ OMAP_TAG_LCD,		&h4_lcd_config },
+};
+
+static void __init omap_h4_init(void)
+{
+	/*
+	 * Make sure the serial ports are muxed on at this point.
+	 * You have to mux them off in device drivers later on
+	 * if not needed.
+	 */
+	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
+	omap_board_config = h4_config;
+	omap_board_config_size = ARRAY_SIZE(h4_config);
+	omap_serial_init();
+}
+
+static void __init omap_h4_map_io(void)
+{
+	omap_map_common_io();
+}
+
+MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
+	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+	.phys_ram	= 0x80000000,
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_h4_map_io,
+	.init_irq	= omap_h4_init_irq,
+	.init_machine	= omap_h4_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
new file mode 100644
index 000000000000..85818d9f2635
--- /dev/null
+++ b/arch/arm/mach-omap2/clock.c
@@ -0,0 +1,1129 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock.c
+ *
+ *  Copyright (C) 2005 Texas Instruments Inc.
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Created for OMAP2.
+ *
+ *  Cleaned up and modified to use omap shared clock framework by
+ *  Tony Lindgren <tony@atomide.com>
+ *
+ *  Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+
+#include <asm/hardware/clock.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/arch/prcm.h>
+
+#include "clock.h"
+
+//#define DOWN_VARIABLE_DPLL 1			/* Experimental */
+
+static struct prcm_config *curr_prcm_set;
+static struct memory_timings mem_timings;
+static u32 curr_perf_level = PRCM_FULL_SPEED;
+
+/*-------------------------------------------------------------------------
+ * Omap2 specific clock functions
+ *-------------------------------------------------------------------------*/
+
+/* Recalculate SYST_CLK */
+static void omap2_sys_clk_recalc(struct clk * clk)
+{
+	u32 div = PRCM_CLKSRC_CTRL;
+	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
+	div >>= clk->rate_offset;
+	clk->rate = (clk->parent->rate / div);
+	propagate_rate(clk);
+}
+
+static u32 omap2_get_dpll_rate(struct clk * tclk)
+{
+	int dpll_clk, dpll_mult, dpll_div, amult;
+
+	dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff;	/* 10 bits */
+	dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f;	/* 4 bits */
+	dpll_clk = (tclk->parent->rate * dpll_mult) / (dpll_div + 1);
+	amult = CM_CLKSEL2_PLL & 0x3;
+	dpll_clk *= amult;
+
+	return dpll_clk;
+}
+
+static void omap2_followparent_recalc(struct clk *clk)
+{
+	followparent_recalc(clk);
+}
+
+static void omap2_propagate_rate(struct clk * clk)
+{
+	if (!(clk->flags & RATE_FIXED))
+		clk->rate = clk->parent->rate;
+
+	propagate_rate(clk);
+}
+
+/* Enable an APLL if off */
+static void omap2_clk_fixed_enable(struct clk *clk)
+{
+	u32 cval, i=0;
+
+	if (clk->enable_bit == 0xff)			/* Parent will do it */
+		return;
+
+	cval = CM_CLKEN_PLL;
+
+	if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit))
+		return;
+
+	cval &= ~(0x3 << clk->enable_bit);
+	cval |= (0x3 << clk->enable_bit);
+	CM_CLKEN_PLL = cval;
+
+	if (clk == &apll96_ck)
+		cval = (1 << 8);
+	else if (clk == &apll54_ck)
+		cval = (1 << 6);
+
+	while (!CM_IDLEST_CKGEN & cval) {		/* Wait for lock */
+		++i;
+		udelay(1);
+		if (i == 100000)
+			break;
+	}
+}
+
+/* Enables clock without considering parent dependencies or use count
+ * REVISIT: Maybe change this to use clk->enable like on omap1?
+ */
+static int omap2_clk_enable(struct clk * clk)
+{
+	u32 regval32;
+
+	if (clk->flags & ALWAYS_ENABLED)
+		return 0;
+
+	if (unlikely(clk->enable_reg == 0)) {
+		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+		       clk->name);
+		return 0;
+	}
+
+	if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
+		omap2_clk_fixed_enable(clk);
+		return 0;
+	}
+
+	regval32 = __raw_readl(clk->enable_reg);
+	regval32 |= (1 << clk->enable_bit);
+	__raw_writel(regval32, clk->enable_reg);
+
+	return 0;
+}
+
+/* Stop APLL */
+static void omap2_clk_fixed_disable(struct clk *clk)
+{
+	u32 cval;
+
+	if(clk->enable_bit == 0xff)		/* let parent off do it */
+		return;
+
+	cval = CM_CLKEN_PLL;
+	cval &= ~(0x3 << clk->enable_bit);
+	CM_CLKEN_PLL = cval;
+}
+
+/* Disables clock without considering parent dependencies or use count */
+static void omap2_clk_disable(struct clk *clk)
+{
+	u32 regval32;
+
+	if (clk->enable_reg == 0)
+		return;
+
+	if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
+		omap2_clk_fixed_disable(clk);
+		return;
+	}
+
+	regval32 = __raw_readl(clk->enable_reg);
+	regval32 &= ~(1 << clk->enable_bit);
+	__raw_writel(regval32, clk->enable_reg);
+}
+
+static int omap2_clk_use(struct clk *clk)
+{
+	int ret = 0;
+
+	if (clk->usecount++ == 0) {
+		if (likely((u32)clk->parent))
+			ret = omap2_clk_use(clk->parent);
+
+		if (unlikely(ret != 0)) {
+			clk->usecount--;
+			return ret;
+		}
+
+		ret = omap2_clk_enable(clk);
+
+		if (unlikely(ret != 0) && clk->parent) {
+			omap2_clk_unuse(clk->parent);
+			clk->usecount--;
+		}
+	}
+
+	return ret;
+}
+
+static void omap2_clk_unuse(struct clk *clk)
+{
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		omap2_clk_disable(clk);
+		if (likely((u32)clk->parent))
+			omap2_clk_unuse(clk->parent);
+	}
+}
+
+/*
+ * Uses the current prcm set to tell if a rate is valid.
+ * You can go slower, but not faster within a given rate set.
+ */
+static u32 omap2_dpll_round_rate(unsigned long target_rate)
+{
+	u32 high, low;
+
+	if ((CM_CLKSEL2_PLL & 0x3) == 1) {	/* DPLL clockout */
+		high = curr_prcm_set->dpll_speed * 2;
+		low = curr_prcm_set->dpll_speed;
+	} else {				/* DPLL clockout x 2 */
+		high = curr_prcm_set->dpll_speed;
+		low = curr_prcm_set->dpll_speed / 2;
+	}
+
+#ifdef DOWN_VARIABLE_DPLL
+	if (target_rate > high)
+		return high;
+	else
+		return target_rate;
+#else
+	if (target_rate > low)
+		return high;
+	else
+		return low;
+#endif
+
+}
+
+/*
+ * Used for clocks that are part of CLKSEL_xyz governed clocks.
+ * REVISIT: Maybe change to use clk->enable() functions like on omap1?
+ */
+static void omap2_clksel_recalc(struct clk * clk)
+{
+	u32 fixed = 0, div = 0;
+
+	if (clk == &dpll_ck) {
+		clk->rate = omap2_get_dpll_rate(clk);
+		fixed = 1;
+		div = 0;
+	}
+
+	if (clk == &iva1_mpu_int_ifck) {
+		div = 2;
+		fixed = 1;
+	}
+
+	if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) {
+		clk->rate = sys_ck.rate;
+		return;
+	}
+
+	if (!fixed) {
+		div = omap2_clksel_get_divisor(clk);
+		if (div == 0)
+			return;
+	}
+
+	if (div != 0) {
+		if (unlikely(clk->rate == clk->parent->rate / div))
+			return;
+		clk->rate = clk->parent->rate / div;
+	}
+
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
+}
+
+/*
+ * Finds best divider value in an array based on the source and target
+ * rates. The divider array must be sorted with smallest divider first.
+ */
+static inline u32 omap2_divider_from_table(u32 size, u32 *div_array,
+					   u32 src_rate, u32 tgt_rate)
+{
+	int i, test_rate;
+
+	if (div_array == NULL)
+		return ~1;
+
+	for (i=0; i < size; i++) {
+		test_rate = src_rate / *div_array;
+		if (test_rate <= tgt_rate)
+			return *div_array;
+		++div_array;
+	}
+
+	return ~0;	/* No acceptable divider */
+}
+
+/*
+ * Find divisor for the given clock and target rate.
+ *
+ * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
+ * they are only settable as part of virtual_prcm set.
+ */
+static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate,
+	u32 *new_div)
+{
+	u32 gfx_div[] = {2, 3, 4};
+	u32 sysclkout_div[] = {1, 2, 4, 8, 16};
+	u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16};
+	u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18};
+	u32 best_div = ~0, asize = 0;
+	u32 *div_array = NULL;
+
+	switch (tclk->flags & SRC_RATE_SEL_MASK) {
+	case CM_GFX_SEL1:
+		asize = 3;
+		div_array = gfx_div;
+		break;
+	case CM_PLL_SEL1:
+		return omap2_dpll_round_rate(target_rate);
+	case CM_SYSCLKOUT_SEL1:
+		asize = 5;
+		div_array = sysclkout_div;
+		break;
+	case CM_CORE_SEL1:
+		if(tclk == &dss1_fck){
+			if(tclk->parent == &core_ck){
+				asize = 10;
+				div_array = dss1_div;
+			} else {
+				*new_div = 0; /* fixed clk */
+				return(tclk->parent->rate);
+			}
+		} else if((tclk == &vlynq_fck) && cpu_is_omap2420()){
+			if(tclk->parent == &core_ck){
+				asize = 10;
+				div_array = vylnq_div;
+			} else {
+				*new_div = 0; /* fixed clk */
+				return(tclk->parent->rate);
+			}
+		}
+		break;
+	}
+
+	best_div = omap2_divider_from_table(asize, div_array,
+	 tclk->parent->rate, target_rate);
+	if (best_div == ~0){
+		*new_div = 1;
+		return best_div; /* signal error */
+	}
+
+	*new_div = best_div;
+	return (tclk->parent->rate / best_div);
+}
+
+/* Given a clock and a rate apply a clock specific rounding function */
+static long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 new_div = 0;
+	int valid_rate;
+
+	if (clk->flags & RATE_FIXED)
+		return clk->rate;
+
+	if (clk->flags & RATE_CKCTL) {
+		valid_rate = omap2_clksel_round_rate(clk, rate, &new_div);
+		return valid_rate;
+	}
+
+	if (clk->round_rate != 0)
+		return clk->round_rate(clk, rate);
+
+	return clk->rate;
+}
+
+/*
+ * Check the DLL lock state, and return tue if running in unlock mode.
+ * This is needed to compenste for the shifted DLL value in unlock mode.
+ */
+static u32 omap2_dll_force_needed(void)
+{
+	u32 dll_state = SDRC_DLLA_CTRL;		/* dlla and dllb are a set */
+
+	if ((dll_state & (1 << 2)) == (1 << 2))
+		return 1;
+	else
+		return 0;
+}
+
+static void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
+{
+	unsigned long dll_cnt;
+	u32 fast_dll = 0;
+
+	mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
+
+	/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
+	 * In the case of 2422, its ok to use CS1 instead of CS0.
+	 */
+
+#if 0	/* FIXME: Enable after 24xx cpu detection works */
+	ctype = get_cpu_type();
+	if (cpu_is_omap2422())
+		mem_timings.base_cs = 1;
+	else
+#endif
+		mem_timings.base_cs = 0;
+
+	if (mem_timings.m_type != M_DDR)
+		return;
+
+	/* With DDR we need to determine the low frequency DLL value */
+	if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
+		mem_timings.dll_mode = M_UNLOCK;
+	else
+		mem_timings.dll_mode = M_LOCK;
+
+	if (mem_timings.base_cs == 0) {
+		fast_dll = SDRC_DLLA_CTRL;
+		dll_cnt = SDRC_DLLA_STATUS & 0xff00;
+	} else {
+		fast_dll = SDRC_DLLB_CTRL;
+		dll_cnt = SDRC_DLLB_STATUS & 0xff00;
+	}
+	if (force_lock_to_unlock_mode) {
+		fast_dll &= ~0xff00;
+		fast_dll |= dll_cnt;		/* Current lock mode */
+	}
+	mem_timings.fast_dll_ctrl = fast_dll;
+
+	/* No disruptions, DDR will be offline & C-ABI not followed */
+	omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
+			    mem_timings.fast_dll_ctrl,
+			    mem_timings.base_cs,
+			    force_lock_to_unlock_mode);
+	mem_timings.slow_dll_ctrl &= 0xff00;	/* Keep lock value */
+
+	/* Turn status into unlock ctrl */
+	mem_timings.slow_dll_ctrl |=
+		((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
+
+	/* 90 degree phase for anything below 133Mhz */
+	mem_timings.slow_dll_ctrl |= (1 << 1);
+}
+
+static u32 omap2_reprogram_sdrc(u32 level, u32 force)
+{
+	u32 prev = curr_perf_level, flags;
+
+	if ((curr_perf_level == level) && !force)
+		return prev;
+
+	if (level == PRCM_HALF_SPEED) {
+		local_irq_save(flags);
+		PRCM_VOLTSETUP = 0xffff;
+		omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
+					  mem_timings.slow_dll_ctrl,
+					  mem_timings.m_type);
+		curr_perf_level = PRCM_HALF_SPEED;
+		local_irq_restore(flags);
+	}
+	if (level == PRCM_FULL_SPEED) {
+		local_irq_save(flags);
+		PRCM_VOLTSETUP = 0xffff;
+		omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
+					  mem_timings.fast_dll_ctrl,
+					  mem_timings.m_type);
+		curr_perf_level = PRCM_FULL_SPEED;
+		local_irq_restore(flags);
+	}
+
+	return prev;
+}
+
+static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate)
+{
+	u32 flags, cur_rate, low, mult, div, valid_rate, done_rate;
+	u32 bypass = 0;
+	struct prcm_config tmpset;
+	int ret = -EINVAL;
+
+	local_irq_save(flags);
+	cur_rate = omap2_get_dpll_rate(&dpll_ck);
+	mult = CM_CLKSEL2_PLL & 0x3;
+
+	if ((rate == (cur_rate / 2)) && (mult == 2)) {
+		omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
+	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
+		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
+	} else if (rate != cur_rate) {
+		valid_rate = omap2_dpll_round_rate(rate);
+		if (valid_rate != rate)
+			goto dpll_exit;
+
+		if ((CM_CLKSEL2_PLL & 0x3) == 1)
+			low = curr_prcm_set->dpll_speed;
+		else
+			low = curr_prcm_set->dpll_speed / 2;
+
+		tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL;
+		tmpset.cm_clksel1_pll &= ~(0x3FFF << 8);
+		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
+		tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL;
+		tmpset.cm_clksel2_pll &= ~0x3;
+		if (rate > low) {
+			tmpset.cm_clksel2_pll |= 0x2;
+			mult = ((rate / 2) / 1000000);
+			done_rate = PRCM_FULL_SPEED;
+		} else {
+			tmpset.cm_clksel2_pll |= 0x1;
+			mult = (rate / 1000000);
+			done_rate = PRCM_HALF_SPEED;
+		}
+		tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12));
+
+		/* Worst case */
+		tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS;
+
+		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
+			bypass = 1;
+
+		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */
+
+		/* Force dll lock mode */
+		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
+			       bypass);
+
+		/* Errata: ret dll entry state */
+		omap2_init_memory_params(omap2_dll_force_needed());
+		omap2_reprogram_sdrc(done_rate, 0);
+	}
+	omap2_clksel_recalc(&dpll_ck);
+	ret = 0;
+
+dpll_exit:
+	local_irq_restore(flags);
+	return(ret);
+}
+
+/* Just return the MPU speed */
+static void omap2_mpu_recalc(struct clk * clk)
+{
+	clk->rate = curr_prcm_set->mpu_speed;
+}
+
+/*
+ * Look for a rate equal or less than the target rate given a configuration set.
+ *
+ * What's not entirely clear is "which" field represents the key field.
+ * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
+ * just uses the ARM rates.
+ */
+static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
+{
+	struct prcm_config * ptr;
+	long highest_rate;
+
+	if (clk != &virt_prcm_set)
+		return -EINVAL;
+
+	highest_rate = -EINVAL;
+
+	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
+		if (ptr->xtal_speed != sys_ck.rate)
+			continue;
+
+		highest_rate = ptr->mpu_speed;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->mpu_speed <= rate)
+			break;
+	}
+	return highest_rate;
+}
+
+/*
+ * omap2_convert_field_to_div() - turn field value into integer divider
+ */
+static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val)
+{
+	u32 i;
+	u32 clkout_array[] = {1, 2, 4, 8, 16};
+
+	if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) {
+		for (i = 0; i < 5; i++) {
+			if (field_val == i)
+				return clkout_array[i];
+		}
+		return ~0;
+	} else
+		return field_val;
+}
+
+/*
+ * Returns the CLKSEL divider register value
+ * REVISIT: This should be cleaned up to work nicely with void __iomem *
+ */
+static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
+			    struct clk *clk)
+{
+	int ret = ~0;
+	u32 reg_val, div_off;
+	u32 div_addr = 0;
+	u32 mask = ~0;
+
+	div_off = clk->rate_offset;
+
+	switch ((*div_sel & SRC_RATE_SEL_MASK)) {
+	case CM_MPU_SEL1:
+		div_addr = (u32)&CM_CLKSEL_MPU;
+		mask = 0x1f;
+		break;
+	case CM_DSP_SEL1:
+		div_addr = (u32)&CM_CLKSEL_DSP;
+		if (cpu_is_omap2420()) {
+			if ((div_off == 0) || (div_off == 8))
+				mask = 0x1f;
+			else if (div_off == 5)
+				mask = 0x3;
+		} else if (cpu_is_omap2430()) {
+			if (div_off == 0)
+				mask = 0x1f;
+			else if (div_off == 5)
+				mask = 0x3;
+		}
+		break;
+	case CM_GFX_SEL1:
+		div_addr = (u32)&CM_CLKSEL_GFX;
+		if (div_off == 0)
+			mask = 0x7;
+		break;
+	case CM_MODEM_SEL1:
+		div_addr = (u32)&CM_CLKSEL_MDM;
+		if (div_off == 0)
+			mask = 0xf;
+		break;
+	case CM_SYSCLKOUT_SEL1:
+		div_addr = (u32)&PRCM_CLKOUT_CTRL;
+		if ((div_off == 3) || (div_off = 11))
+			mask= 0x3;
+		break;
+	case CM_CORE_SEL1:
+		div_addr = (u32)&CM_CLKSEL1_CORE;
+		switch (div_off) {
+		case 0:					/* l3 */
+		case 8:					/* dss1 */
+		case 15:				/* vylnc-2420 */
+		case 20:				/* ssi */
+			mask = 0x1f; break;
+		case 5:					/* l4 */
+			mask = 0x3; break;
+		case 13:				/* dss2 */
+			mask = 0x1; break;
+		case 25:				/* usb */
+			mask = 0xf; break;
+		}
+	}
+
+	*field_mask = mask;
+
+	if (unlikely(mask == ~0))
+		div_addr = 0;
+
+	*div_sel = div_addr;
+
+	if (unlikely(div_addr == 0))
+		return ret;
+
+	/* Isolate field */
+	reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off);
+
+	/* Normalize back to divider value */
+	reg_val >>= div_off;
+
+	return reg_val;
+}
+
+/*
+ * Return divider to be applied to parent clock.
+ * Return 0 on error.
+ */
+static u32 omap2_clksel_get_divisor(struct clk *clk)
+{
+	int ret = 0;
+	u32 div, div_sel, div_off, field_mask, field_val;
+
+	/* isolate control register */
+	div_sel = (SRC_RATE_SEL_MASK & clk->flags);
+
+	div_off = clk->rate_offset;
+	field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
+	if (div_sel == 0)
+		return ret;
+
+	div_sel = (SRC_RATE_SEL_MASK & clk->flags);
+	div = omap2_clksel_to_divisor(div_sel, field_val);
+
+	return div;
+}
+
+/* Set the clock rate for a clock source */
+static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
+
+{
+	int ret = -EINVAL;
+	void __iomem * reg;
+	u32 div_sel, div_off, field_mask, field_val, reg_val, validrate;
+	u32 new_div = 0;
+
+	if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) {
+		if (clk == &dpll_ck)
+			return omap2_reprogram_dpll(clk, rate);
+
+		/* Isolate control register */
+		div_sel = (SRC_RATE_SEL_MASK & clk->flags);
+		div_off = clk->src_offset;
+
+		validrate = omap2_clksel_round_rate(clk, rate, &new_div);
+		if(validrate != rate)
+			return(ret);
+
+		field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
+		if (div_sel == 0)
+			return ret;
+
+		if(clk->flags & CM_SYSCLKOUT_SEL1){
+			switch(new_div){
+			case 16: field_val = 4; break;
+			case 8:  field_val = 3; break;
+			case 4:  field_val = 2; break;
+			case 2:  field_val = 1; break;
+			case 1:  field_val = 0; break;
+			}
+		}
+		else
+			field_val = new_div;
+
+		reg = (void __iomem *)div_sel;
+
+		reg_val = __raw_readl(reg);
+		reg_val &= ~(field_mask << div_off);
+		reg_val |= (field_val << div_off);
+
+		__raw_writel(reg_val, reg);
+		clk->rate = clk->parent->rate / field_val;
+
+		if (clk->flags & DELAYED_APP)
+			__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
+		ret = 0;
+	} else if (clk->set_rate != 0)
+		ret = clk->set_rate(clk, rate);
+
+	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
+		propagate_rate(clk);
+
+	return ret;
+}
+
+/* Converts encoded control register address into a full address */
+static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
+			       struct clk *src_clk, u32 *field_mask)
+{
+	u32 val = ~0, src_reg_addr = 0, mask = 0;
+
+	/* Find target control register.*/
+	switch ((*type_to_addr & SRC_RATE_SEL_MASK)) {
+	case CM_CORE_SEL1:
+		src_reg_addr = (u32)&CM_CLKSEL1_CORE;
+		if (reg_offset == 13) {			/* DSS2_fclk */
+			mask = 0x1;
+			if (src_clk == &sys_ck)
+				val = 0;
+			if (src_clk == &func_48m_ck)
+				val = 1;
+		} else if (reg_offset == 8) {		/* DSS1_fclk */
+			mask = 0x1f;
+			if (src_clk == &sys_ck)
+				val = 0;
+			else if (src_clk == &core_ck)	/* divided clock */
+				val = 0x10;		/* rate needs fixing */
+		} else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/
+			mask = 0x1F;
+			if(src_clk == &func_96m_ck)
+				val = 0;
+			else if (src_clk == &core_ck)
+				val = 0x10;
+		}
+		break;
+	case CM_CORE_SEL2:
+		src_reg_addr = (u32)&CM_CLKSEL2_CORE;
+		mask = 0x3;
+		if (src_clk == &func_32k_ck)
+			val = 0x0;
+		if (src_clk == &sys_ck)
+			val = 0x1;
+		if (src_clk == &alt_ck)
+			val = 0x2;
+		break;
+	case CM_WKUP_SEL1:
+		src_reg_addr = (u32)&CM_CLKSEL2_CORE;
+		mask = 0x3;
+		if (src_clk == &func_32k_ck)
+			val = 0x0;
+		if (src_clk == &sys_ck)
+			val = 0x1;
+		if (src_clk == &alt_ck)
+			val = 0x2;
+		break;
+	case CM_PLL_SEL1:
+		src_reg_addr = (u32)&CM_CLKSEL1_PLL;
+		mask = 0x1;
+		if (reg_offset == 0x3) {
+			if (src_clk == &apll96_ck)
+				val = 0;
+			if (src_clk == &alt_ck)
+				val = 1;
+		}
+		else if (reg_offset == 0x5) {
+			if (src_clk == &apll54_ck)
+				val = 0;
+			if (src_clk == &alt_ck)
+				val = 1;
+		}
+		break;
+	case CM_PLL_SEL2:
+		src_reg_addr = (u32)&CM_CLKSEL2_PLL;
+		mask = 0x3;
+		if (src_clk == &func_32k_ck)
+			val = 0x0;
+		if (src_clk == &dpll_ck)
+			val = 0x2;
+		break;
+	case CM_SYSCLKOUT_SEL1:
+		src_reg_addr = (u32)&PRCM_CLKOUT_CTRL;
+		mask = 0x3;
+		if (src_clk == &dpll_ck)
+			val = 0;
+		if (src_clk == &sys_ck)
+			val = 1;
+		if (src_clk == &func_54m_ck)
+			val = 2;
+		if (src_clk == &func_96m_ck)
+			val = 3;
+		break;
+	}
+
+	if (val == ~0)			/* Catch errors in offset */
+		*type_to_addr = 0;
+	else
+		*type_to_addr = src_reg_addr;
+	*field_mask = mask;
+
+	return val;
+}
+
+static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
+{
+	void __iomem * reg;
+	u32 src_sel, src_off, field_val, field_mask, reg_val, rate;
+	int ret = -EINVAL;
+
+	if (unlikely(clk->flags & CONFIG_PARTICIPANT))
+		return ret;
+
+	if (clk->flags & SRC_SEL_MASK) {	/* On-chip SEL collection */
+		src_sel = (SRC_RATE_SEL_MASK & clk->flags);
+		src_off = clk->src_offset;
+
+		if (src_sel == 0)
+			goto set_parent_error;
+
+		field_val = omap2_get_src_field(&src_sel, src_off, new_parent,
+						&field_mask);
+
+		reg = (void __iomem *)src_sel;
+
+		if (clk->usecount > 0)
+			omap2_clk_disable(clk);
+
+		/* Set new source value (previous dividers if any in effect) */
+		reg_val = __raw_readl(reg) & ~(field_mask << src_off);
+		reg_val |= (field_val << src_off);
+		__raw_writel(reg_val, reg);
+
+		if (clk->flags & DELAYED_APP)
+			__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
+
+		if (clk->usecount > 0)
+			omap2_clk_enable(clk);
+
+		clk->parent = new_parent;
+
+		/* SRC_RATE_SEL_MASK clocks follow their parents rates.*/
+		if ((new_parent == &core_ck) && (clk == &dss1_fck))
+			clk->rate = new_parent->rate / 0x10;
+		else
+			clk->rate = new_parent->rate;
+
+		if (unlikely(clk->flags & RATE_PROPAGATES))
+			propagate_rate(clk);
+
+		return 0;
+	} else {
+		clk->parent = new_parent;
+		rate = new_parent->rate;
+		omap2_clk_set_rate(clk, rate);
+		ret = 0;
+	}
+
+ set_parent_error:
+	return ret;
+}
+
+/* Sets basic clocks based on the specified rate */
+static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
+{
+	u32 flags, cur_rate, done_rate, bypass = 0;
+	u8 cpu_mask = 0;
+	struct prcm_config *prcm;
+	unsigned long found_speed = 0;
+
+	if (clk != &virt_prcm_set)
+		return -EINVAL;
+
+	/* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */
+	if (cpu_is_omap2420())
+		cpu_mask = RATE_IN_242X;
+	else if (cpu_is_omap2430())
+		cpu_mask = RATE_IN_243X;
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+
+		if (prcm->mpu_speed <= rate) {
+			found_speed = prcm->mpu_speed;
+			break;
+		}
+	}
+
+	if (!found_speed) {
+		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
+	 rate / 1000000);
+		return -EINVAL;
+	}
+
+	curr_prcm_set = prcm;
+	cur_rate = omap2_get_dpll_rate(&dpll_ck);
+
+	if (prcm->dpll_speed == cur_rate / 2) {
+		omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
+	} else if (prcm->dpll_speed == cur_rate * 2) {
+		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
+	} else if (prcm->dpll_speed != cur_rate) {
+		local_irq_save(flags);
+
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			bypass = 1;
+
+		if ((prcm->cm_clksel2_pll & 0x3) == 2)
+			done_rate = PRCM_FULL_SPEED;
+		else
+			done_rate = PRCM_HALF_SPEED;
+
+		/* MPU divider */
+		CM_CLKSEL_MPU = prcm->cm_clksel_mpu;
+
+		/* dsp + iva1 div(2420), iva2.1(2430) */
+		CM_CLKSEL_DSP = prcm->cm_clksel_dsp;
+
+		CM_CLKSEL_GFX = prcm->cm_clksel_gfx;
+
+		/* Major subsystem dividers */
+		CM_CLKSEL1_CORE = prcm->cm_clksel1_core;
+		if (cpu_is_omap2430())
+			CM_CLKSEL_MDM = prcm->cm_clksel_mdm;
+
+		/* x2 to enter init_mem */
+		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
+
+		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
+			       bypass);
+
+		omap2_init_memory_params(omap2_dll_force_needed());
+		omap2_reprogram_sdrc(done_rate, 0);
+
+		local_irq_restore(flags);
+	}
+	omap2_clksel_recalc(&dpll_ck);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------
+ * Omap2 clock reset and init functions
+ *-------------------------------------------------------------------------*/
+
+static struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_use		= omap2_clk_use,
+	.clk_unuse		= omap2_clk_unuse,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+};
+
+static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
+{
+	u32 div, aplls, sclk = 13000000;
+
+	aplls = CM_CLKSEL1_PLL;
+	aplls &= ((1 << 23) | (1 << 24) | (1 << 25));
+	aplls >>= 23;			/* Isolate field, 0,2,3 */
+
+	if (aplls == 0)
+		sclk = 19200000;
+	else if (aplls == 2)
+		sclk = 13000000;
+	else if (aplls == 3)
+		sclk = 12000000;
+
+	div = PRCM_CLKSRC_CTRL;
+	div &= ((1 << 7) | (1 << 6));
+	div >>= sys->rate_offset;
+
+	osc->rate = sclk * div;
+	sys->rate = sclk;
+}
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+static void __init omap2_disable_unused_clocks(void)
+{
+	struct clk *ck;
+	u32 regval32;
+
+	list_for_each_entry(ck, &clocks, node) {
+		if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
+			ck->enable_reg == 0)
+			continue;
+
+		regval32 = __raw_readl(ck->enable_reg);
+		if ((regval32 & (1 << ck->enable_bit)) == 0)
+			continue;
+
+		printk(KERN_INFO "Disabling unused clock \"%s\"\n", ck->name);
+		omap2_clk_disable(ck);
+	}
+}
+late_initcall(omap2_disable_unused_clocks);
+#endif
+
+/*
+ * Switch the MPU rate if specified on cmdline.
+ * We cannot do this early until cmdline is parsed.
+ */
+static int __init omap2_clk_arch_init(void)
+{
+	if (!mpurate)
+		return -EINVAL;
+
+	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+		printk(KERN_ERR "Could not find matching MPU rate\n");
+
+	propagate_rate(&osc_ck);		/* update main root fast */
+	propagate_rate(&func_32k_ck);		/* update main root slow */
+
+	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	return 0;
+}
+arch_initcall(omap2_clk_arch_init);
+
+int __init omap2_clk_init(void)
+{
+	struct prcm_config *prcm;
+	struct clk ** clkp;
+	u32 clkrate;
+
+	clk_init(&omap2_clk_functions);
+	omap2_get_crystal_rate(&osc_ck, &sys_ck);
+
+	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
+	     clkp++) {
+
+		if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
+			clk_register(*clkp);
+			continue;
+		}
+
+		if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
+			clk_register(*clkp);
+			continue;
+		}
+	}
+
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2_get_dpll_rate(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			 break;
+	}
+	curr_prcm_set = prcm;
+
+	propagate_rate(&osc_ck);		/* update main root fast */
+	propagate_rate(&func_32k_ck);		/* update main root slow */
+
+	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_use(&sync_32k_ick);
+	clk_use(&omapctrl_ick);
+	if (cpu_is_omap2430())
+		clk_use(&sdrc_ick);
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
new file mode 100644
index 000000000000..4aeab5591bd3
--- /dev/null
+++ b/arch/arm/mach-omap2/clock.h
@@ -0,0 +1,2103 @@
+/*
+ *  linux/arch/arm/mach-omap24xx/clock.h
+ *
+ *  Copyright (C) 2005 Texas Instruments Inc.
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Created for OMAP2.
+ *
+ *  Copyright (C) 2004 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
+
+static void omap2_sys_clk_recalc(struct clk * clk);
+static void omap2_clksel_recalc(struct clk * clk);
+static void omap2_followparent_recalc(struct clk * clk);
+static void omap2_propagate_rate(struct clk * clk);
+static void omap2_mpu_recalc(struct clk * clk);
+static int omap2_select_table_rate(struct clk * clk, unsigned long rate);
+static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate);
+static void omap2_clk_unuse(struct clk *clk);
+static void omap2_sys_clk_recalc(struct clk * clk);
+static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val);
+static u32 omap2_clksel_get_divisor(struct clk *clk);
+
+
+#define RATE_IN_242X	(1 << 0)
+#define RATE_IN_243X	(1 << 1)
+
+/* Memory timings */
+#define M_DDR		1
+#define M_LOCK_CTRL	(1 << 2)
+#define M_UNLOCK	0
+#define M_LOCK		1
+
+struct memory_timings {
+	u32 m_type;		/* ddr = 1, sdr = 0 */
+	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
+	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
+	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
+	u32 base_cs;		/* base chip select to use for calculations */
+};
+
+/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
+ * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ */
+struct prcm_config {
+	unsigned long xtal_speed;	/* crystal rate */
+	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
+	unsigned long mpu_speed;	/* speed of MPU */
+	unsigned long cm_clksel_mpu;	/* mpu divider */
+	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
+	unsigned long cm_clksel_gfx;	/* gfx dividers */
+	unsigned long cm_clksel1_core;	/* major subsystem dividers */
+	unsigned long cm_clksel1_pll;	/* m,n */
+	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
+	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
+	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
+	unsigned char flags;
+};
+
+/* Mask for clksel which support parent settign in set_rate */
+#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \
+			CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1)
+
+/* Mask for clksel regs which support rate operations */
+#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \
+			CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \
+			CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \
+			CM_SYSCLKOUT_SEL1)
+
+/*
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ */
+
+/* Core fields for cm_clksel, not ratio governed */
+#define RX_CLKSEL_DSS1			(0x10 << 8)
+#define RX_CLKSEL_DSS2			(0x0 << 13)
+#define RX_CLKSEL_SSI			(0x5 << 20)
+
+/*-------------------------------------------------------------------------
+ * Voltage/DPLL ratios
+ *-------------------------------------------------------------------------*/
+
+/* 2430 Ratio's, 2430-Ratio Config 1 */
+#define R1_CLKSEL_L3			(4 << 0)
+#define R1_CLKSEL_L4			(2 << 5)
+#define R1_CLKSEL_USB			(4 << 25)
+#define R1_CM_CLKSEL1_CORE_VAL		R1_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					R1_CLKSEL_L4 | R1_CLKSEL_L3
+#define R1_CLKSEL_MPU			(2 << 0)
+#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
+#define R1_CLKSEL_DSP			(2 << 0)
+#define R1_CLKSEL_DSP_IF		(2 << 5)
+#define R1_CM_CLKSEL_DSP_VAL		R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
+#define R1_CLKSEL_GFX			(2 << 0)
+#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
+#define R1_CLKSEL_MDM			(4 << 0)
+#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
+
+/* 2430-Ratio Config 2 */
+#define R2_CLKSEL_L3			(6 << 0)
+#define R2_CLKSEL_L4			(2 << 5)
+#define R2_CLKSEL_USB			(2 << 25)
+#define R2_CM_CLKSEL1_CORE_VAL		R2_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					R2_CLKSEL_L4 | R2_CLKSEL_L3
+#define R2_CLKSEL_MPU			(2 << 0)
+#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
+#define R2_CLKSEL_DSP			(2 << 0)
+#define R2_CLKSEL_DSP_IF		(3 << 5)
+#define R2_CM_CLKSEL_DSP_VAL		R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
+#define R2_CLKSEL_GFX			(2 << 0)
+#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
+#define R2_CLKSEL_MDM			(6 << 0)
+#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
+
+/* 2430-Ratio Bootm (BYPASS) */
+#define RB_CLKSEL_L3			(1 << 0)
+#define RB_CLKSEL_L4			(1 << 5)
+#define RB_CLKSEL_USB			(1 << 25)
+#define RB_CM_CLKSEL1_CORE_VAL		RB_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RB_CLKSEL_L4 | RB_CLKSEL_L3
+#define RB_CLKSEL_MPU			(1 << 0)
+#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
+#define RB_CLKSEL_DSP			(1 << 0)
+#define RB_CLKSEL_DSP_IF		(1 << 5)
+#define RB_CM_CLKSEL_DSP_VAL		RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
+#define RB_CLKSEL_GFX			(1 << 0)
+#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
+#define RB_CLKSEL_MDM			(1 << 0)
+#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
+
+/* 2420 Ratio Equivalents */
+#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
+#define RXX_CLKSEL_SSI			(0x8 << 20)
+
+/* 2420-PRCM III 532MHz core */
+#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
+#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
+#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
+#define RIII_CM_CLKSEL1_CORE_VAL	RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+					RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+					RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
+					RIII_CLKSEL_L3
+#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
+#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
+#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
+#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
+#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
+#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
+#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
+#define RIII_CM_CLKSEL_DSP_VAL		RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
+					RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
+					RIII_CLKSEL_DSP
+#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
+#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
+
+/* 2420-PRCM II 600MHz core */
+#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
+#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
+#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
+#define RII_CM_CLKSEL1_CORE_VAL		RII_CLKSEL_USB | \
+					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RII_CLKSEL_L4 | RII_CLKSEL_L3
+#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
+#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
+#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
+#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
+#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
+#define RII_CLKSEL_IVA			(6 << 8)	/* iva1 - 200MHz */
+#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
+#define RII_CM_CLKSEL_DSP_VAL		RII_SYNC_IVA | RII_CLKSEL_IVA | \
+					RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
+					RII_CLKSEL_DSP
+#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
+#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
+
+/* 2420-PRCM VII (boot) */
+#define RVII_CLKSEL_L3			(1 << 0)
+#define RVII_CLKSEL_L4			(1 << 5)
+#define RVII_CLKSEL_DSS1		(1 << 8)
+#define RVII_CLKSEL_DSS2		(0 << 13)
+#define RVII_CLKSEL_VLYNQ		(1 << 15)
+#define RVII_CLKSEL_SSI			(1 << 20)
+#define RVII_CLKSEL_USB			(1 << 25)
+
+#define RVII_CM_CLKSEL1_CORE_VAL	RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
+					RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
+					RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
+
+#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
+#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
+
+#define RVII_CLKSEL_DSP			(1 << 0)
+#define RVII_CLKSEL_DSP_IF		(1 << 5)
+#define RVII_SYNC_DSP			(0 << 7)
+#define RVII_CLKSEL_IVA			(1 << 8)
+#define RVII_SYNC_IVA			(0 << 13)
+#define RVII_CM_CLKSEL_DSP_VAL		RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
+					RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
+
+#define RVII_CLKSEL_GFX			(1 << 0)
+#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
+
+/*-------------------------------------------------------------------------
+ * 2430 Target modes: Along with each configuration the CPU has several
+ * modes which goes along with them. Modes mainly are the addition of
+ * describe DPLL combinations to go along with a ratio.
+ *-------------------------------------------------------------------------*/
+
+/* Hardware governed */
+#define MX_48M_SRC			(0 << 3)
+#define MX_54M_SRC			(0 << 5)
+#define MX_APLLS_CLIKIN_12		(3 << 23)
+#define MX_APLLS_CLIKIN_13		(2 << 23)
+#define MX_APLLS_CLIKIN_19_2		(0 << 23)
+
+/*
+ * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
+ * #2	(ratio1) baseport-target
+ * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
+ */
+#define M5A_DPLL_MULT_12		(133 << 12)
+#define M5A_DPLL_DIV_12			(5 << 8)
+#define M5A_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M5A_DPLL_MULT_13		(266 << 12)
+#define M5A_DPLL_DIV_13			(12 << 8)
+#define M5A_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M5A_DPLL_MULT_19		(180 << 12)
+#define M5A_DPLL_DIV_19			(12 << 8)
+#define M5A_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
+#define M5B_DPLL_MULT_12		(50 << 12)
+#define M5B_DPLL_DIV_12			(2 << 8)
+#define M5B_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M5B_DPLL_MULT_13		(200 << 12)
+#define M5B_DPLL_DIV_13			(12 << 8)
+
+#define M5B_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M5B_DPLL_MULT_19		(125 << 12)
+#define M5B_DPLL_DIV_19			(31 << 8)
+#define M5B_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+/*
+ * #4	(ratio2)
+ * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
+ */
+#define M3_DPLL_MULT_12			(55 << 12)
+#define M3_DPLL_DIV_12			(1 << 8)
+#define M3_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M3_DPLL_MULT_13			(330 << 12)
+#define M3_DPLL_DIV_13			(12 << 8)
+#define M3_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M3_DPLL_MULT_19			(275 << 12)
+#define M3_DPLL_DIV_19			(15 << 8)
+#define M3_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+/* boot (boot) */
+#define MB_DPLL_MULT			(1 << 12)
+#define MB_DPLL_DIV			(0 << 8)
+#define MB_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_12
+
+#define MB_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_13
+
+#define MB_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_19
+
+/*
+ * 2430 - chassis (sedna)
+ * 165 (ratio1) same as above #2
+ * 150 (ratio1)
+ * 133 (ratio2) same as above #4
+ * 110 (ratio2) same as above #3
+ * 104 (ratio2)
+ * boot (boot)
+ */
+
+/*
+ * 2420 Equivalent - mode registers
+ * PRCM II , target DPLL = 2*300MHz = 600MHz
+ */
+#define MII_DPLL_MULT_12		(50 << 12)
+#define MII_DPLL_DIV_12			(1 << 8)
+#define MII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define MII_DPLL_MULT_13		(300 << 12)
+#define MII_DPLL_DIV_13			(12 << 8)
+#define MII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+/* PRCM III target DPLL = 2*266 = 532MHz*/
+#define MIII_DPLL_MULT_12		(133 << 12)
+#define MIII_DPLL_DIV_12		(5 << 8)
+#define MIII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define MIII_DPLL_MULT_13		(266 << 12)
+#define MIII_DPLL_DIV_13		(12 << 8)
+#define MIII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+/* PRCM VII (boot bypass) */
+#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
+#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
+
+/* High and low operation value */
+#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
+#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
+
+/*
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the oppisite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration.	A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define V24XX_SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
+#define V24XX_SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
+#define V24XX_SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
+#define V24XX_SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
+
+/* MPU speed defines */
+#define S12M	12000000
+#define S13M	13000000
+#define S19M	19200000
+#define S26M	26000000
+#define S100M	100000000
+#define S133M	133000000
+#define S150M	150000000
+#define S165M	165000000
+#define S200M	200000000
+#define S266M	266000000
+#define S300M	300000000
+#define S330M	330000000
+#define S400M	400000000
+#define S532M	532000000
+#define S600M	600000000
+#define S660M	660000000
+
+/*-------------------------------------------------------------------------
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on H4 boards and 2430-SDPs variants available.
+ * There are quite a few more rates combinations which could be defined.
+ *
+ * When multiple values are defiend the start up will try and choose the
+ * fastest one. If a 'fast' value is defined, then automatically, the /2
+ * one should be included as it can be used.	Generally having more that
+ * one fast set does not make sense, as static timings need to be changed
+ * to change the set.	 The exception is the bypass setting which is
+ * availble for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ *-------------------------------------------------------------------------*/
+static struct prcm_config rate_table[] = {
+	/* PRCM II - FAST */
+	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - FAST */
+	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM II - SLOW */
+	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - SLOW */
+	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	/* PRCM #3 - ratio2 (ES2) - FAST */
+	{S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_110MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - FAST */
+	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - FAST */
+	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM #3 - ratio2 (ES2) - SLOW */
+	{S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_110MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - SLOW */
+	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - SLOW*/
+	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		V24XX_SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
+
+/*-------------------------------------------------------------------------
+ * 24xx clock tree.
+ *
+ * NOTE:In many cases here we are assigning a 'default' parent.	In many
+ *	cases the parent is selectable.	The get/set parent calls will also
+ *	switch sources.
+ *
+ *	Many some clocks say always_enabled, but they can be auto idled for
+ *	power savings. They will always be available upon clock request.
+ *
+ *	Several sources are given initial rates which may be wrong, this will
+ *	be fixed up in the init func.
+ *
+ *	Things are broadly separated below by clock domains. It is
+ *	noteworthy that most periferals have dependencies on multiple clock
+ *	domains. Many get their interface clocks from the L4 domain, but get
+ *	functional clocks from fixed sources or other core domain derived
+ *	clocks.
+ *-------------------------------------------------------------------------*/
+
+/* Base external input clocks */
+static struct clk func_32k_ck = {
+	.name		= "func_32k_ck",
+	.rate		= 32000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED,
+};
+
+/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
+static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
+	.name		= "osc_ck",
+	.rate		= 26000000,		/* fixed up in clock init */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+};
+
+/* With out modem likely 12MHz, with modem likely 13MHz */
+static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
+	.name		= "sys_ck",		/* ~ ref_clk also */
+	.parent		= &osc_ck,
+	.rate		= 13000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.rate_offset	= 6, /* sysclkdiv 1 or 2, already handled or no boot */
+	.recalc		= &omap2_sys_clk_recalc,
+};
+
+static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
+	.name		= "alt_ck",
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &omap2_propagate_rate,
+};
+
+/*
+ * Analog domain root source clocks
+ */
+
+/* dpll_ck, is broken out in to special cases through clksel */
+static struct clk dpll_ck = {
+	.name		= "dpll_ck",
+	.parent		= &sys_ck,		/* Can be func_32k also */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk apll96_ck = {
+	.name		= "apll96_ck",
+	.parent		= &sys_ck,
+	.rate		= 96000000,
+	.flags		= CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES,
+	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
+	.enable_bit	= 0x2,
+	.recalc		= &omap2_propagate_rate,
+};
+
+static struct clk apll54_ck = {
+	.name		= "apll54_ck",
+	.parent		= &sys_ck,
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES,
+	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
+	.enable_bit	= 0x6,
+	.recalc		= &omap2_propagate_rate,
+};
+
+/*
+ * PRCM digital base sources
+ */
+static struct clk func_54m_ck = {
+	.name		= "func_54m_ck",
+	.parent		= &apll54_ck,	/* can also be alt_clk */
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
+	.src_offset	= 5,
+	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
+	.enable_bit	= 0xff,
+	.recalc		= &omap2_propagate_rate,
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.parent		= &dpll_ck,		/* can also be 32k */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &omap2_propagate_rate,
+};
+
+static struct clk sleep_ck = {		/* sys_clk or 32k */
+	.name		= "sleep_ck",
+	.parent		= &func_32k_ck,
+	.rate		= 32000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &omap2_propagate_rate,
+};
+
+static struct clk func_96m_ck = {
+	.name		= "func_96m_ck",
+	.parent		= &apll96_ck,
+	.rate		= 96000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES,
+	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
+	.enable_bit	= 0xff,
+	.recalc		= &omap2_propagate_rate,
+};
+
+static struct clk func_48m_ck = {
+	.name		= "func_48m_ck",
+	.parent		= &apll96_ck,	 /* 96M or Alt */
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
+	.src_offset	= 3,
+	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
+	.enable_bit	= 0xff,
+	.recalc		= &omap2_propagate_rate,
+};
+
+static struct clk func_12m_ck = {
+	.name		= "func_12m_ck",
+	.parent		= &func_48m_ck,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES,
+	.recalc		= &omap2_propagate_rate,
+	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
+	.enable_bit	= 0xff,
+};
+
+/* Secure timer, only available in secure mode */
+static struct clk wdt1_osc_ck = {
+	.name		= "ck_wdt1_osc",
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk sys_clkout = {
+	.name		= "sys_clkout",
+	.parent		= &func_54m_ck,
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
+	.src_offset	= 0,
+	.enable_reg	= (void __iomem *)&PRCM_CLKOUT_CTRL,
+	.enable_bit	= 7,
+	.rate_offset	= 3,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.parent		= &func_54m_ck,
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
+	.src_offset	= 8,
+	.enable_reg	= (void __iomem *)&PRCM_CLKOUT_CTRL,
+	.enable_bit	= 15,
+	.rate_offset	= 11,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * MPU clock domain
+ *	Clocks:
+ *		MPU_FCLK, MPU_ICLK
+ *		INT_M_FCLK, INT_M_I_CLK
+ *
+ * - Individual clocks are hardware managed.
+ * - Base divider comes from: CM_CLKSEL_MPU
+ *
+ */
+static struct clk mpu_ck = {	/* Control cpu */
+	.name		= "mpu_ck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL |
+				ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP |
+				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.rate_offset	= 0,	/* bits 0-4 */
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
+ * Clocks:
+ *	2430: IVA2.1_FCLK, IVA2.1_ICLK
+ *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
+ */
+static struct clk iva2_1_fck = {
+	.name		= "iva2_1_fck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
+				DELAYED_APP | RATE_PROPAGATES |
+				CONFIG_PARTICIPANT,
+	.rate_offset	= 0,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
+	.enable_bit	= 0,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk iva2_1_ick = {
+	.name		= "iva2_1_ick",
+	.parent		= &iva2_1_fck,
+	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
+				DELAYED_APP | CONFIG_PARTICIPANT,
+	.rate_offset	= 5,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * Won't be too specific here. The core clock comes into this block
+ * it is divided then tee'ed. One branch goes directly to xyz enable
+ * controls. The other branch gets further divided by 2 then possibly
+ * routed into a synchronizer and out of clocks abc.
+ */
+static struct clk dsp_fck = {
+	.name		= "dsp_fck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
+			DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.rate_offset	= 0,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
+	.enable_bit	= 0,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk dsp_ick = {
+	.name		= "dsp_ick",	 /* apparently ipi and isp */
+	.parent		= &dsp_fck,
+	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
+				DELAYED_APP | CONFIG_PARTICIPANT,
+	.rate_offset = 5,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_DSP,
+	.enable_bit	= 1,		/* for ipi */
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk iva1_ifck = {
+	.name		= "iva1_ifck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL |
+			CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP,
+	.rate_offset= 8,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
+	.enable_bit	= 10,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* IVA1 mpu/int/i/f clocks are /2 of parent */
+static struct clk iva1_mpu_int_ifck = {
+	.name		= "iva1_mpu_int_ifck",
+	.parent		= &iva1_ifck,
+	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
+	.enable_bit	= 8,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * L3 clock domain
+ * L3 clocks are used for both interface and functional clocks to
+ * multiple entities. Some of these clocks are completely managed
+ * by hardware, and some others allow software control. Hardware
+ * managed ones general are based on directly CLK_REQ signals and
+ * various auto idle settings. The functional spec sets many of these
+ * as 'tie-high' for their enables.
+ *
+ * I-CLOCKS:
+ *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
+ *	CAM, HS-USB.
+ * F-CLOCK
+ *	SSI.
+ *
+ * GPMC memories and SDRC have timing and clock sensitive registers which
+ * may very well need notification when the clock changes. Currently for low
+ * operating points, these are taken care of in sleep.S.
+ */
+static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
+	.name		= "core_l3_ck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
+				DELAYED_APP | CONFIG_PARTICIPANT |
+				RATE_PROPAGATES,
+	.rate_offset	= 0,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk usb_l4_ick = {	/* FS-USB interface clock */
+	.name		= "usb_l4_ick",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP |
+				CONFIG_PARTICIPANT,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 0,
+	.rate_offset = 25,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * SSI is in L3 management domain, its direct parent is core not l3,
+ * many core power domain entities are grouped into the L3 clock
+ * domain.
+ * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
+ *
+ * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
+ */
+static struct clk ssi_ssr_sst_fck = {
+	.name		= "ssi_fck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,	/* bit 1 */
+	.enable_bit	= 1,
+	.rate_offset = 20,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * GFX clock domain
+ *	Clocks:
+ * GFX_FCLK, GFX_ICLK
+ * GFX_CG1(2d), GFX_CG2(3d)
+ *
+ * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
+ * The 2d and 3d clocks run at a hardware determined
+ * divided value of fclk.
+ *
+ */
+static struct clk gfx_3d_fck = {
+	.name		= "gfx_3d_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | CM_GFX_SEL1,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_GFX,
+	.enable_bit	= 2,
+	.rate_offset= 0,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_2d_fck = {
+	.name		= "gfx_2d_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | CM_GFX_SEL1,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_GFX,
+	.enable_bit	= 1,
+	.rate_offset= 0,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_ick = {
+	.name		= "gfx_ick",		/* From l3 */
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_GFX,	/* bit 0 */
+	.enable_bit	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+/*
+ * Modem clock domain (2430)
+ *	CLOCKS:
+ *		MDM_OSC_CLK
+ *		MDM_ICLK
+ */
+static struct clk mdm_ick = {		/* used both as a ick and fck */
+	.name		= "mdm_ick",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 |
+				DELAYED_APP | CONFIG_PARTICIPANT,
+	.rate_offset	= 0,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_MDM,
+	.enable_bit	= 0,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mdm_osc_ck = {
+	.name		= "mdm_osc_ck",
+	.rate		= 26000000,
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP243X | RATE_FIXED,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_MDM,
+	.enable_bit	= 1,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+/*
+ * L4 clock management domain
+ *
+ * This domain contains lots of interface clocks from the L4 interface, some
+ * functional clocks.	Fixed APLL functional source clocks are managed in
+ * this domain.
+ */
+static struct clk l4_ck = {		/* used both as an ick and fck */
+	.name		= "l4_ck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
+				DELAYED_APP | RATE_PROPAGATES,
+	.rate_offset	= 5,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,	/* bit 1 */
+	.enable_bit	= 1,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+/*
+ * DSS clock domain
+ * CLOCKs:
+ * DSS_L4_ICLK, DSS_L3_ICLK,
+ * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
+ *
+ * DSS is both initiator and target.
+ */
+static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
+	.name		= "dss_ick",
+	.parent		= &l4_ck,	/* really both l3 and l4 */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk dss1_fck = {
+	.name		= "dss1_fck",
+	.parent		= &core_ck,		/* Core or sys */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 0,
+	.rate_offset	= 8,
+	.src_offset	= 8,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk dss2_fck = {		/* Alt clk used in power management */
+	.name		= "dss2_fck",
+	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 1,
+	.src_offset	= 13,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk dss_54m_fck = {	/* Alt clk used in power management */
+	.name		= "dss_54m_fck",	/* 54m tv clk */
+	.parent		= &func_54m_ck,
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 2,
+	.recalc		= &omap2_propagate_rate,
+};
+
+/*
+ * CORE power domain ICLK & FCLK defines.
+ * Many of the these can have more than one possible parent. Entries
+ * here will likely have an L4 interface parent, and may have multiple
+ * functional clock parents.
+ */
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,	/* Bit4 */
+	.enable_bit	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_WKUP_SEL1,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
+	.enable_bit	= 0,
+	.src_offset	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* bit4 */
+	.enable_bit	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 4,
+	.src_offset	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit5 */
+	.enable_bit	= 5,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 5,
+	.src_offset	= 4,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit6 */
+	.enable_bit	= 6,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 6,
+	.src_offset	= 6,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* Bit7 */
+	.enable_bit	= 7,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 7,
+	.src_offset	= 8,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_bit	= 8,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit8 */
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 8,
+	.src_offset	= 10,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit9 */
+	.enable_bit	= 9,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 9,
+	.src_offset	= 12,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit10 */
+	.enable_bit	= 10,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 10,
+	.src_offset	= 14,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 11,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+					CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 11,
+	.src_offset	= 16,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 12,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+					CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 12,
+	.src_offset	= 18,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 13,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+					CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 13,
+	.src_offset	= 20,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit14 */
+	.enable_bit	= 14,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+					CM_CORE_SEL2,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 14,
+	.src_offset	= 22,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_bit	= 15,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit16 */
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_bit	= 15,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_bit	= 16,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_bit	= 16,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+	.name		= "mcbsp3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 3,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp3_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 3,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+	.name		= "mcbsp4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 4,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp4_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 4,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+	.name		= "mcbsp5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 5,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp5_fck = {
+	.name		= "mcbsp5_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 5,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 17,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi1_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 17,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 18,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi2_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 18,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+	.name		= "mcspi3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 9,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+	.name		= "mcspi3_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 9,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 21,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 21,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 22,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 22,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpios_ick = {
+	.name		= "gpios_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
+	.enable_bit	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpios_fck = {
+	.name		= "gpios_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
+	.enable_bit	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mpu_wdt_ick = {
+	.name		= "mpu_wdt_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
+	.enable_bit	= 3,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mpu_wdt_fck = {
+	.name		= "mpu_wdt_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
+	.enable_bit	= 3,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk sync_32k_ick = {
+	.name		= "sync_32k_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
+	.enable_bit	= 1,
+	.recalc		= &omap2_followparent_recalc,
+};
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
+	.enable_bit	= 4,
+	.recalc		= &omap2_followparent_recalc,
+};
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
+	.enable_bit	= 5,
+	.recalc		= &omap2_followparent_recalc,
+};
+static struct clk icr_ick = {
+	.name		= "icr_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
+	.enable_bit	= 6,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk cam_ick = {
+	.name		= "cam_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 31,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk cam_fck = {
+	.name		= "cam_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 31,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 30,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk wdt4_ick = {
+	.name		= "wdt4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 29,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk wdt4_fck = {
+	.name		= "wdt4_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 29,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 28,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 28,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 27,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 27,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmc_ick = {
+	.name		= "mmc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 26,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmc_fck = {
+	.name		= "mmc_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 26,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 25,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk fac_fck = {
+	.name		= "fac_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 25,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk eac_ick = {
+	.name		= "eac_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 24,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk eac_fck = {
+	.name		= "eac_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 24,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 23,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 23,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 20,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c2_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 20,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk i2chs2_fck = {
+	.name		= "i2chs2_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 20,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 19,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c1_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 19,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk i2chs1_fck = {
+	.name		= "i2chs1_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 19,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk vlynq_ick = {
+	.name		= "vlynq_ick",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
+	.enable_bit	= 3,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk vlynq_fck = {
+	.name		= "vlynq_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X  | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
+	.enable_bit	= 3,
+	.src_offset	= 15,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk sdrc_ick = {
+	.name		= "sdrc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN3_CORE,
+	.enable_bit	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk des_ick = {
+	.name		= "des_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
+	.enable_bit	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk sha_ick = {
+	.name		= "sha_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
+	.enable_bit	= 1,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
+	.enable_bit	= 2,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk aes_ick = {
+	.name		= "aes_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
+	.enable_bit	= 3,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
+	.enable_bit	= 4,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk usb_fck = {
+	.name		= "usb_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 0,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk usbhs_ick = {
+	.name		= "usbhs_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 6,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+	.name		= "mmchs1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 7,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+	.name		= "mmchs1_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 7,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+	.name		= "mmchs2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 8,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+	.name		= "mmchs2_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 8,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 10,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk gpio5_fck = {
+	.name		= "gpio5_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 10,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mdm_intc_ick = {
+	.name		= "mdm_intc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
+	.enable_bit	= 11,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmchsdb1_fck = {
+	.name		= "mmchsdb1_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 16,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+static struct clk mmchsdb2_fck = {
+	.name		= "mmchsdb2_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
+	.enable_bit	= 17,
+	.recalc		= &omap2_followparent_recalc,
+};
+
+/*
+ * This clock is a composite clock which does entire set changes then
+ * forces a rebalance. It keys on the MPU speed, but it really could
+ * be any key speed part of a set in the rate table.
+ *
+ * to really change a set, you need memory table sets which get changed
+ * in sram, pre-notifiers & post notifiers, changing the top set, without
+ * having low level display recalc's won't work... this is why dpm notifiers
+ * work, isr's off, walk a list of clocks already _off_ and not messing with
+ * the bus.
+ *
+ * This clock should have no parent. It embodies the entire upper level
+ * active set. A parent will mess up some of the init also.
+ */
+static struct clk virt_prcm_set = {
+	.name		= "virt_prcm_set",
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
+	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
+	.recalc		= &omap2_mpu_recalc,	/* sets are keyed on mpu rate */
+	.set_rate	= &omap2_select_table_rate,
+	.round_rate	= &omap2_round_to_table_rate,
+};
+
+static struct clk *onchip_clks[] = {
+	/* external root sources */
+	&func_32k_ck,
+	&osc_ck,
+	&sys_ck,
+	&alt_ck,
+	/* internal analog sources */
+	&dpll_ck,
+	&apll96_ck,
+	&apll54_ck,
+	/* internal prcm root sources */
+	&func_54m_ck,
+	&core_ck,
+	&sleep_ck,
+	&func_96m_ck,
+	&func_48m_ck,
+	&func_12m_ck,
+	&wdt1_osc_ck,
+	&sys_clkout,
+	&sys_clkout2,
+	/* mpu domain clocks */
+	&mpu_ck,
+	/* dsp domain clocks */
+	&iva2_1_fck,		/* 2430 */
+	&iva2_1_ick,
+	&dsp_ick,		/* 2420 */
+	&dsp_fck,
+	&iva1_ifck,
+	&iva1_mpu_int_ifck,
+	/* GFX domain clocks */
+	&gfx_3d_fck,
+	&gfx_2d_fck,
+	&gfx_ick,
+	/* Modem domain clocks */
+	&mdm_ick,
+	&mdm_osc_ck,
+	/* DSS domain clocks */
+	&dss_ick,
+	&dss1_fck,
+	&dss2_fck,
+	&dss_54m_fck,
+	/* L3 domain clocks */
+	&core_l3_ck,
+	&ssi_ssr_sst_fck,
+	&usb_l4_ick,
+	/* L4 domain clocks */
+	&l4_ck,			/* used as both core_l4 and wu_l4 */
+	&ssi_l4_ick,
+	/* virtual meta-group clock */
+	&virt_prcm_set,
+	/* general l4 interface ck, multi-parent functional clk */
+	&gpt1_ick,
+	&gpt1_fck,
+	&gpt2_ick,
+	&gpt2_fck,
+	&gpt3_ick,
+	&gpt3_fck,
+	&gpt4_ick,
+	&gpt4_fck,
+	&gpt5_ick,
+	&gpt5_fck,
+	&gpt6_ick,
+	&gpt6_fck,
+	&gpt7_ick,
+	&gpt7_fck,
+	&gpt8_ick,
+	&gpt8_fck,
+	&gpt9_ick,
+	&gpt9_fck,
+	&gpt10_ick,
+	&gpt10_fck,
+	&gpt11_ick,
+	&gpt11_fck,
+	&gpt12_ick,
+	&gpt12_fck,
+	&mcbsp1_ick,
+	&mcbsp1_fck,
+	&mcbsp2_ick,
+	&mcbsp2_fck,
+	&mcbsp3_ick,
+	&mcbsp3_fck,
+	&mcbsp4_ick,
+	&mcbsp4_fck,
+	&mcbsp5_ick,
+	&mcbsp5_fck,
+	&mcspi1_ick,
+	&mcspi1_fck,
+	&mcspi2_ick,
+	&mcspi2_fck,
+	&mcspi3_ick,
+	&mcspi3_fck,
+	&uart1_ick,
+	&uart1_fck,
+	&uart2_ick,
+	&uart2_fck,
+	&uart3_ick,
+	&uart3_fck,
+	&gpios_ick,
+	&gpios_fck,
+	&mpu_wdt_ick,
+	&mpu_wdt_fck,
+	&sync_32k_ick,
+	&wdt1_ick,
+	&omapctrl_ick,
+	&icr_ick,
+	&cam_fck,
+	&cam_ick,
+	&mailboxes_ick,
+	&wdt4_ick,
+	&wdt4_fck,
+	&wdt3_ick,
+	&wdt3_fck,
+	&mspro_ick,
+	&mspro_fck,
+	&mmc_ick,
+	&mmc_fck,
+	&fac_ick,
+	&fac_fck,
+	&eac_ick,
+	&eac_fck,
+	&hdq_ick,
+	&hdq_fck,
+	&i2c1_ick,
+	&i2c1_fck,
+	&i2chs1_fck,
+	&i2c2_ick,
+	&i2c2_fck,
+	&i2chs2_fck,
+	&vlynq_ick,
+	&vlynq_fck,
+	&sdrc_ick,
+	&des_ick,
+	&sha_ick,
+	&rng_ick,
+	&aes_ick,
+	&pka_ick,
+	&usb_fck,
+	&usbhs_ick,
+	&mmchs1_ick,
+	&mmchs1_fck,
+	&mmchs2_ick,
+	&mmchs2_fck,
+	&gpio5_ick,
+	&gpio5_fck,
+	&mdm_intc_ick,
+	&mmchsdb1_fck,
+	&mmchsdb2_fck,
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
new file mode 100644
index 000000000000..7181edb89352
--- /dev/null
+++ b/arch/arm/mach-omap2/devices.c
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/arm/mach-omap2/devices.c
+ *
+ * OMAP2 platform device setup/initialization
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/gpio.h>
+
+extern void omap_nop_release(struct device *dev);
+
+/*-------------------------------------------------------------------------*/
+
+#if 	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+
+#define OMAP2_I2C_BASE2		0x48072000
+#define OMAP2_I2C_INT2		57
+
+static struct resource i2c_resources2[] = {
+	{
+		.start		= OMAP2_I2C_BASE2,
+		.end		= OMAP2_I2C_BASE2 + 0x3f,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP2_I2C_INT2,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device omap_i2c_device2 = {
+        .name           = "i2c_omap",
+        .id             = 2,
+        .dev = {
+                .release        = omap_nop_release,
+        },
+	.num_resources	= ARRAY_SIZE(i2c_resources2),
+	.resource	= i2c_resources2,
+};
+
+/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */
+static void omap_init_i2c(void)
+{
+	/* REVISIT: Second I2C not in use on H4? */
+	if (machine_is_omap_h4())
+		return;
+
+	omap_cfg_reg(J15_24XX_I2C2_SCL);
+	omap_cfg_reg(H19_24XX_I2C2_SDA);
+	(void) platform_device_register(&omap_i2c_device2);
+}
+
+#else
+
+static void omap_init_i2c(void) {}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static int __init omap2_init_devices(void)
+{
+	/* please keep these calls, and their implementations above,
+	 * in alphabetical order so they're easier to sort through.
+	 */
+	omap_init_i2c();
+
+	return 0;
+}
+arch_initcall(omap2_init_devices);
+
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
new file mode 100644
index 000000000000..76187300f2b6
--- /dev/null
+++ b/arch/arm/mach-omap2/id.c
@@ -0,0 +1,124 @@
+/*
+ * linux/arch/arm/mach-omap2/id.c
+ *
+ * OMAP2 CPU identification code
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#define OMAP24XX_TAP_BASE	io_p2v(0x48014000)
+
+#define OMAP_TAP_IDCODE		0x0204
+#define OMAP_TAP_PROD_ID	0x0208
+
+#define OMAP_TAP_DIE_ID_0	0x0218
+#define OMAP_TAP_DIE_ID_1	0x021C
+#define OMAP_TAP_DIE_ID_2	0x0220
+#define OMAP_TAP_DIE_ID_3	0x0224
+
+/* system_rev fields for OMAP2 processors:
+ *   CPU id bits     [31:16],
+ *   CPU device type [15:12], (unprg,normal,POP)
+ *   CPU revision    [11:08]
+ *   CPU class bits  [07:00]
+ */
+
+struct omap_id {
+	u16	hawkeye;	/* Silicon type (Hawkeye id) */
+	u8	dev;		/* Device type from production_id reg */
+	u32	type;		/* combined type id copied to system_rev */
+};
+
+/* Register values to detect the OMAP version */
+static struct omap_id omap_ids[] __initdata = {
+	{ .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200000 },
+	{ .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201000 },
+	{ .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202000 },
+	{ .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220000 },
+	{ .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230000 },
+	{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
+};
+
+static u32 __init read_tap_reg(int reg)
+{
+	return __raw_readl(OMAP24XX_TAP_BASE + reg);
+}
+
+void __init omap2_check_revision(void)
+{
+	int i, j;
+	u32 idcode;
+	u32 prod_id;
+	u16 hawkeye;
+	u8  dev_type;
+	u8  rev;
+
+	idcode = read_tap_reg(OMAP_TAP_IDCODE);
+	prod_id = read_tap_reg(OMAP_TAP_PROD_ID);
+	hawkeye = (idcode >> 12) & 0xffff;
+	rev = (idcode >> 28) & 0x0f;
+	dev_type = (prod_id >> 16) & 0x0f;
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
+		idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
+	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n",
+		read_tap_reg(OMAP_TAP_DIE_ID_0));
+	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
+		read_tap_reg(OMAP_TAP_DIE_ID_1),
+	       (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
+	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n",
+		read_tap_reg(OMAP_TAP_DIE_ID_2));
+	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n",
+		read_tap_reg(OMAP_TAP_DIE_ID_3));
+	printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
+		prod_id, dev_type);
+#endif
+
+	/* Check hawkeye ids */
+	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+		if (hawkeye == omap_ids[i].hawkeye)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(omap_ids)) {
+		printk(KERN_ERR "Unknown OMAP CPU id\n");
+		return;
+	}
+
+	for (j = i; j < ARRAY_SIZE(omap_ids); j++) {
+		if (dev_type == omap_ids[j].dev)
+			break;
+	}
+
+	if (j == ARRAY_SIZE(omap_ids)) {
+		printk(KERN_ERR "Unknown OMAP device type. "
+				"Handling it as OMAP%04x\n",
+				omap_ids[i].type >> 16);
+		j = i;
+	}
+	system_rev = omap_ids[j].type;
+
+	system_rev |= rev << 8;
+
+	/* Add the cpu class info (24xx) */
+	system_rev |= 0x24;
+
+	pr_info("OMAP%04x", system_rev >> 16);
+	if ((system_rev >> 8) & 0x0f)
+		printk("%x", (system_rev >> 8) & 0x0f);
+	printk("\n");
+}
+
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
new file mode 100644
index 000000000000..8ea67bf196a5
--- /dev/null
+++ b/arch/arm/mach-omap2/io.c
@@ -0,0 +1,53 @@
+/*
+ * linux/arch/arm/mach-omap2/io.c
+ *
+ * OMAP2 I/O mapping code
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+#include <asm/io.h>
+#include <asm/arch/mux.h>
+
+extern void omap_sram_init(void);
+extern int omap2_clk_init(void);
+extern void omap2_check_revision(void);
+
+/*
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ */
+static struct map_desc omap2_io_desc[] __initdata = {
+	{
+		.virtual	= L3_24XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_24XX_PHYS),
+		.length		= L3_24XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= L4_24XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_24XX_PHYS),
+		.length		= L4_24XX_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init omap_map_common_io(void)
+{
+	iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc));
+	omap2_check_revision();
+	omap_sram_init();
+	omap2_mux_init();
+	omap2_clk_init();
+}
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
new file mode 100644
index 000000000000..d7baff675cfe
--- /dev/null
+++ b/arch/arm/mach-omap2/irq.c
@@ -0,0 +1,149 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/irq.c
+ *
+ * Interrupt handler for OMAP2 boards.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <asm/hardware.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#define INTC_REVISION	0x0000
+#define INTC_SYSCONFIG	0x0010
+#define INTC_SYSSTATUS	0x0014
+#define INTC_CONTROL	0x0048
+#define INTC_MIR_CLEAR0	0x0088
+#define INTC_MIR_SET0	0x008c
+
+/*
+ * OMAP2 has a number of different interrupt controllers, each interrupt
+ * controller is identified as its own "bank". Register definitions are
+ * fairly consistent for each bank, but not all registers are implemented
+ * for each bank.. when in doubt, consult the TRM.
+ */
+static struct omap_irq_bank {
+	unsigned long base_reg;
+	unsigned int nr_irqs;
+} __attribute__ ((aligned(4))) irq_banks[] = {
+	{
+		/* MPU INTC */
+		.base_reg	= OMAP24XX_IC_BASE,
+		.nr_irqs	= 96,
+	}, {
+		/* XXX: DSP INTC */
+
+#if 0
+	/*
+	 * Commented out for now until we fix the IVA clocking
+	 */
+#ifdef CONFIG_ARCH_OMAP2420
+	}, {
+		/* IVA INTC (2420 only) */
+		.base_reg	= OMAP24XX_IVA_INTC_BASE,
+		.nr_irqs	= 16,	/* Actually 32, but only 16 are used */
+#endif
+#endif
+	}
+};
+
+/* XXX: FIQ and additional INTC support (only MPU at the moment) */
+static void omap_ack_irq(unsigned int irq)
+{
+	omap_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL);
+}
+
+static void omap_mask_irq(unsigned int irq)
+{
+	int offset = (irq >> 5) << 5;
+
+	if (irq >= 64) {
+		irq %= 64;
+	} else if (irq >= 32) {
+		irq %= 32;
+	}
+
+	omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset);
+}
+
+static void omap_unmask_irq(unsigned int irq)
+{
+	int offset = (irq >> 5) << 5;
+
+	if (irq >= 64) {
+		irq %= 64;
+	} else if (irq >= 32) {
+		irq %= 32;
+	}
+
+	omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset);
+}
+
+static void omap_mask_ack_irq(unsigned int irq)
+{
+	omap_mask_irq(irq);
+	omap_ack_irq(irq);
+}
+
+static struct irqchip omap_irq_chip = {
+	.ack	= omap_mask_ack_irq,
+	.mask	= omap_mask_irq,
+	.unmask	= omap_unmask_irq,
+};
+
+static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
+{
+	unsigned long tmp;
+
+	tmp = omap_readl(bank->base_reg + INTC_REVISION) & 0xff;
+	printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx "
+			 "(revision %ld.%ld) with %d interrupts\n",
+			 bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
+
+	tmp = omap_readl(bank->base_reg + INTC_SYSCONFIG);
+	tmp |= 1 << 1;	/* soft reset */
+	omap_writel(tmp, bank->base_reg + INTC_SYSCONFIG);
+
+	while (!(omap_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1))
+		/* Wait for reset to complete */;
+}
+
+void __init omap_init_irq(void)
+{
+	unsigned long nr_irqs = 0;
+	unsigned int nr_banks = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+		struct omap_irq_bank *bank = irq_banks + i;
+
+		/* XXX */
+		if (!bank->base_reg)
+			continue;
+
+		omap_irq_bank_init_one(bank);
+
+		nr_irqs += bank->nr_irqs;
+		nr_banks++;
+	}
+
+	printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n",
+	       nr_irqs, nr_banks, nr_banks > 1 ? "s" : "");
+
+	for (i = 0; i < nr_irqs; i++) {
+		set_irq_chip(i, &omap_irq_chip);
+		set_irq_handler(i, do_level_IRQ);
+		set_irq_flags(i, IRQF_VALID);
+	}
+}
+
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
new file mode 100644
index 000000000000..ea4654815dd1
--- /dev/null
+++ b/arch/arm/mach-omap2/mux.c
@@ -0,0 +1,65 @@
+/*
+ * linux/arch/arm/mach-omap2/mux.c
+ *
+ * OMAP1 pin multiplexing configurations
+ *
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+#include <asm/arch/mux.h>
+
+#ifdef CONFIG_OMAP_MUX
+
+/* NOTE: See mux.h for the enumeration */
+
+struct pin_config __initdata_or_module omap24xx_pins[] = {
+/*
+ *	description			mux	mux	pull	pull	debug
+ *					offset	mode	ena	type
+ */
+
+/* 24xx I2C */
+MUX_CFG_24XX("M19_24XX_I2C1_SCL",	0x111,	0,	0,	0,	1)
+MUX_CFG_24XX("L15_24XX_I2C1_SDA",	0x112,	0,	0,	0,	1)
+MUX_CFG_24XX("J15_24XX_I2C2_SCL",	0x113,	0,	0,	0,	1)
+MUX_CFG_24XX("H19_24XX_I2C2_SDA",	0x114,	0,	0,	0,	1)
+
+/* Menelaus interrupt */
+MUX_CFG_24XX("W19_24XX_SYS_NIRQ",	0x12c,	0,	1,	1,	1)
+
+/* 24xx GPIO */
+MUX_CFG_24XX("Y20_24XX_GPIO60",		0x12c,	3,	0,	0,	1)
+MUX_CFG_24XX("M15_24XX_GPIO92",		0x10a,	3,	0,	0,	1)
+
+};
+
+int __init omap2_mux_init(void)
+{
+	omap_mux_register(omap24xx_pins, ARRAY_SIZE(omap24xx_pins));
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/prcm.h b/arch/arm/mach-omap2/prcm.h
new file mode 100644
index 000000000000..2eb89b936c83
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm.h
@@ -0,0 +1,419 @@
+/*
+ * prcm.h - Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
+#define __ASM_ARM_ARCH_DPM_PRCM_H
+
+/* SET_PERFORMANCE_LEVEL PARAMETERS */
+#define PRCM_HALF_SPEED 1
+#define PRCM_FULL_SPEED 2
+
+#ifndef __ASSEMBLER__
+
+#define PRCM_REG32(offset)	__REG32(OMAP24XX_PRCM_BASE + (offset))
+
+#define PRCM_REVISION		PRCM_REG32(0x000)
+#define PRCM_SYSCONFIG		PRCM_REG32(0x010)
+#define PRCM_IRQSTATUS_MPU	PRCM_REG32(0x018)
+#define PRCM_IRQENABLE_MPU	PRCM_REG32(0x01C)
+#define PRCM_VOLTCTRL		PRCM_REG32(0x050)
+#define PRCM_VOLTST		PRCM_REG32(0x054)
+#define PRCM_CLKSRC_CTRL	PRCM_REG32(0x060)
+#define PRCM_CLKOUT_CTRL	PRCM_REG32(0x070)
+#define PRCM_CLKEMUL_CTRL	PRCM_REG32(0x078)
+#define PRCM_CLKCFG_CTRL	PRCM_REG32(0x080)
+#define PRCM_CLKCFG_STATUS	PRCM_REG32(0x084)
+#define PRCM_VOLTSETUP		PRCM_REG32(0x090)
+#define PRCM_CLKSSETUP		PRCM_REG32(0x094)
+#define PRCM_POLCTRL		PRCM_REG32(0x098)
+
+/* GENERAL PURPOSE */
+#define GENERAL_PURPOSE1	PRCM_REG32(0x0B0)
+#define GENERAL_PURPOSE2	PRCM_REG32(0x0B4)
+#define GENERAL_PURPOSE3	PRCM_REG32(0x0B8)
+#define GENERAL_PURPOSE4	PRCM_REG32(0x0BC)
+#define GENERAL_PURPOSE5	PRCM_REG32(0x0C0)
+#define GENERAL_PURPOSE6	PRCM_REG32(0x0C4)
+#define GENERAL_PURPOSE7	PRCM_REG32(0x0C8)
+#define GENERAL_PURPOSE8	PRCM_REG32(0x0CC)
+#define GENERAL_PURPOSE9	PRCM_REG32(0x0D0)
+#define GENERAL_PURPOSE10	PRCM_REG32(0x0D4)
+#define GENERAL_PURPOSE11	PRCM_REG32(0x0D8)
+#define GENERAL_PURPOSE12	PRCM_REG32(0x0DC)
+#define GENERAL_PURPOSE13	PRCM_REG32(0x0E0)
+#define GENERAL_PURPOSE14	PRCM_REG32(0x0E4)
+#define GENERAL_PURPOSE15	PRCM_REG32(0x0E8)
+#define GENERAL_PURPOSE16	PRCM_REG32(0x0EC)
+#define GENERAL_PURPOSE17	PRCM_REG32(0x0F0)
+#define GENERAL_PURPOSE18	PRCM_REG32(0x0F4)
+#define GENERAL_PURPOSE19	PRCM_REG32(0x0F8)
+#define GENERAL_PURPOSE20	PRCM_REG32(0x0FC)
+
+/* MPU */
+#define CM_CLKSEL_MPU		PRCM_REG32(0x140)
+#define CM_CLKSTCTRL_MPU	PRCM_REG32(0x148)
+#define RM_RSTST_MPU		PRCM_REG32(0x158)
+#define PM_WKDEP_MPU		PRCM_REG32(0x1C8)
+#define PM_EVGENCTRL_MPU	PRCM_REG32(0x1D4)
+#define PM_EVEGENONTIM_MPU	PRCM_REG32(0x1D8)
+#define PM_EVEGENOFFTIM_MPU	PRCM_REG32(0x1DC)
+#define PM_PWSTCTRL_MPU		PRCM_REG32(0x1E0)
+#define PM_PWSTST_MPU		PRCM_REG32(0x1E4)
+
+/* CORE */
+#define CM_FCLKEN1_CORE		PRCM_REG32(0x200)
+#define CM_FCLKEN2_CORE		PRCM_REG32(0x204)
+#define CM_FCLKEN3_CORE		PRCM_REG32(0x208)
+#define CM_ICLKEN1_CORE		PRCM_REG32(0x210)
+#define CM_ICLKEN2_CORE		PRCM_REG32(0x214)
+#define CM_ICLKEN3_CORE		PRCM_REG32(0x218)
+#define CM_ICLKEN4_CORE		PRCM_REG32(0x21C)
+#define CM_IDLEST1_CORE		PRCM_REG32(0x220)
+#define CM_IDLEST2_CORE		PRCM_REG32(0x224)
+#define CM_IDLEST3_CORE		PRCM_REG32(0x228)
+#define CM_IDLEST4_CORE		PRCM_REG32(0x22C)
+#define CM_AUTOIDLE1_CORE	PRCM_REG32(0x230)
+#define CM_AUTOIDLE2_CORE	PRCM_REG32(0x234)
+#define CM_AUTOIDLE3_CORE	PRCM_REG32(0x238)
+#define CM_AUTOIDLE4_CORE	PRCM_REG32(0x23C)
+#define CM_CLKSEL1_CORE		PRCM_REG32(0x240)
+#define CM_CLKSEL2_CORE		PRCM_REG32(0x244)
+#define CM_CLKSTCTRL_CORE	PRCM_REG32(0x248)
+#define PM_WKEN1_CORE		PRCM_REG32(0x2A0)
+#define PM_WKEN2_CORE		PRCM_REG32(0x2A4)
+#define PM_WKST1_CORE		PRCM_REG32(0x2B0)
+#define PM_WKST2_CORE		PRCM_REG32(0x2B4)
+#define PM_WKDEP_CORE		PRCM_REG32(0x2C8)
+#define PM_PWSTCTRL_CORE	PRCM_REG32(0x2E0)
+#define PM_PWSTST_CORE		PRCM_REG32(0x2E4)
+
+/* GFX */
+#define CM_FCLKEN_GFX		PRCM_REG32(0x300)
+#define CM_ICLKEN_GFX		PRCM_REG32(0x310)
+#define CM_IDLEST_GFX		PRCM_REG32(0x320)
+#define CM_CLKSEL_GFX		PRCM_REG32(0x340)
+#define CM_CLKSTCTRL_GFX	PRCM_REG32(0x348)
+#define RM_RSTCTRL_GFX		PRCM_REG32(0x350)
+#define RM_RSTST_GFX		PRCM_REG32(0x358)
+#define PM_WKDEP_GFX		PRCM_REG32(0x3C8)
+#define PM_PWSTCTRL_GFX		PRCM_REG32(0x3E0)
+#define PM_PWSTST_GFX		PRCM_REG32(0x3E4)
+
+/* WAKE-UP */
+#define CM_FCLKEN_WKUP		PRCM_REG32(0x400)
+#define CM_ICLKEN_WKUP		PRCM_REG32(0x410)
+#define CM_IDLEST_WKUP		PRCM_REG32(0x420)
+#define CM_AUTOIDLE_WKUP	PRCM_REG32(0x430)
+#define CM_CLKSEL_WKUP		PRCM_REG32(0x440)
+#define RM_RSTCTRL_WKUP		PRCM_REG32(0x450)
+#define RM_RSTTIME_WKUP		PRCM_REG32(0x454)
+#define RM_RSTST_WKUP		PRCM_REG32(0x458)
+#define PM_WKEN_WKUP		PRCM_REG32(0x4A0)
+#define PM_WKST_WKUP		PRCM_REG32(0x4B0)
+
+/* CLOCKS */
+#define CM_CLKEN_PLL		PRCM_REG32(0x500)
+#define CM_IDLEST_CKGEN		PRCM_REG32(0x520)
+#define CM_AUTOIDLE_PLL		PRCM_REG32(0x530)
+#define CM_CLKSEL1_PLL		PRCM_REG32(0x540)
+#define CM_CLKSEL2_PLL		PRCM_REG32(0x544)
+
+/* DSP */
+#define CM_FCLKEN_DSP		PRCM_REG32(0x800)
+#define CM_ICLKEN_DSP		PRCM_REG32(0x810)
+#define CM_IDLEST_DSP		PRCM_REG32(0x820)
+#define CM_AUTOIDLE_DSP		PRCM_REG32(0x830)
+#define CM_CLKSEL_DSP		PRCM_REG32(0x840)
+#define CM_CLKSTCTRL_DSP	PRCM_REG32(0x848)
+#define RM_RSTCTRL_DSP		PRCM_REG32(0x850)
+#define RM_RSTST_DSP		PRCM_REG32(0x858)
+#define PM_WKEN_DSP		PRCM_REG32(0x8A0)
+#define PM_WKDEP_DSP		PRCM_REG32(0x8C8)
+#define PM_PWSTCTRL_DSP		PRCM_REG32(0x8E0)
+#define PM_PWSTST_DSP		PRCM_REG32(0x8E4)
+#define PRCM_IRQSTATUS_DSP	PRCM_REG32(0x8F0)
+#define PRCM_IRQENABLE_DSP	PRCM_REG32(0x8F4)
+
+/* IVA */
+#define PRCM_IRQSTATUS_IVA	PRCM_REG32(0x8F8)
+#define PRCM_IRQENABLE_IVA	PRCM_REG32(0x8FC)
+
+/* Modem on 2430 */
+#define CM_FCLKEN_MDM		PRCM_REG32(0xC00)
+#define CM_ICLKEN_MDM		PRCM_REG32(0xC10)
+#define CM_IDLEST_MDM		PRCM_REG32(0xC20)
+#define CM_CLKSEL_MDM		PRCM_REG32(0xC40)
+
+/* FIXME: Move to header for 2430 */
+#define DISP_BASE		(OMAP24XX_L4_IO_BASE+0x50000)
+#define DISP_REG32(offset)	__REG32(DISP_BASE + (offset))
+
+#define GPMC_BASE		(OMAP24XX_GPMC_BASE)
+#define GPMC_REG32(offset)	__REG32(GPMC_BASE + (offset))
+
+#define GPT1_BASE		(OMAP24XX_GPT1)
+#define GPT1_REG32(offset)	__REG32(GPT1_BASE + (offset))
+
+/* Misc sysconfig */
+#define DISPC_SYSCONFIG		DISP_REG32(0x410)
+#define SPI_BASE		(OMAP24XX_L4_IO_BASE+0x98000)
+#define MCSPI1_SYSCONFIG	__REG32(SPI_BASE + 0x10)
+#define MCSPI2_SYSCONFIG	__REG32(SPI_BASE+0x2000 + 0x10)
+
+//#define DSP_MMU_SYSCONFIG	0x5A000010
+#define CAMERA_MMU_SYSCONFIG	__REG32(DISP_BASE+0x2C10)
+//#define IVA_MMU_SYSCONFIG	0x5D000010
+//#define DSP_DMA_SYSCONFIG	0x00FCC02C
+#define CAMERA_DMA_SYSCONFIG	__REG32(DISP_BASE+0x282C)
+#define SYSTEM_DMA_SYSCONFIG	__REG32(DISP_BASE+0x602C)
+#define GPMC_SYSCONFIG		GPMC_REG32(0x010)
+#define MAILBOXES_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE+0x94010)
+#define UART1_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6A054)
+#define UART2_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6C054)
+#define UART3_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6E054)
+//#define IVA_SYSCONFIG		0x5C060010
+#define SDRC_SYSCONFIG		__REG32(OMAP24XX_SDRC_BASE+0x10)
+#define SMS_SYSCONFIG		__REG32(OMAP24XX_SMS_BASE+0x10)
+#define SSI_SYSCONFIG		__REG32(DISP_BASE+0x8010)
+//#define VLYNQ_SYSCONFIG	0x67FFFE10
+
+/* rkw - good cannidates for PM_ to start what nm was trying */
+#define OMAP24XX_GPT2		(OMAP24XX_L4_IO_BASE+0x2A000)
+#define OMAP24XX_GPT3		(OMAP24XX_L4_IO_BASE+0x78000)
+#define OMAP24XX_GPT4		(OMAP24XX_L4_IO_BASE+0x7A000)
+#define OMAP24XX_GPT5		(OMAP24XX_L4_IO_BASE+0x7C000)
+#define OMAP24XX_GPT6		(OMAP24XX_L4_IO_BASE+0x7E000)
+#define OMAP24XX_GPT7		(OMAP24XX_L4_IO_BASE+0x80000)
+#define OMAP24XX_GPT8		(OMAP24XX_L4_IO_BASE+0x82000)
+#define OMAP24XX_GPT9		(OMAP24XX_L4_IO_BASE+0x84000)
+#define OMAP24XX_GPT10		(OMAP24XX_L4_IO_BASE+0x86000)
+#define OMAP24XX_GPT11		(OMAP24XX_L4_IO_BASE+0x88000)
+#define OMAP24XX_GPT12		(OMAP24XX_L4_IO_BASE+0x8A000)
+
+#define GPTIMER1_SYSCONFIG	GPT1_REG32(0x010)
+#define GPTIMER2_SYSCONFIG	__REG32(OMAP24XX_GPT2 + 0x10)
+#define GPTIMER3_SYSCONFIG	__REG32(OMAP24XX_GPT3 + 0x10)
+#define GPTIMER4_SYSCONFIG	__REG32(OMAP24XX_GPT4 + 0x10)
+#define GPTIMER5_SYSCONFIG	__REG32(OMAP24XX_GPT5 + 0x10)
+#define GPTIMER6_SYSCONFIG	__REG32(OMAP24XX_GPT6 + 0x10)
+#define GPTIMER7_SYSCONFIG	__REG32(OMAP24XX_GPT7 + 0x10)
+#define GPTIMER8_SYSCONFIG	__REG32(OMAP24XX_GPT8 + 0x10)
+#define GPTIMER9_SYSCONFIG	__REG32(OMAP24XX_GPT9 + 0x10)
+#define GPTIMER10_SYSCONFIG	__REG32(OMAP24XX_GPT10 + 0x10)
+#define GPTIMER11_SYSCONFIG	__REG32(OMAP24XX_GPT11 + 0x10)
+#define GPTIMER12_SYSCONFIG	__REG32(OMAP24XX_GPT12 + 0x10)
+
+#define GPIOX_BASE(X)		(OMAP24XX_GPIO_BASE+(0x2000*((X)-1)))
+
+#define GPIO1_SYSCONFIG		__REG32((GPIOX_BASE(1)+0x10))
+#define GPIO2_SYSCONFIG		__REG32((GPIOX_BASE(2)+0x10))
+#define GPIO3_SYSCONFIG		__REG32((GPIOX_BASE(3)+0x10))
+#define GPIO4_SYSCONFIG		__REG32((GPIOX_BASE(4)+0x10))
+
+/* GP TIMER 1 */
+#define GPTIMER1_TISTAT		GPT1_REG32(0x014)
+#define GPTIMER1_TISR		GPT1_REG32(0x018)
+#define GPTIMER1_TIER		GPT1_REG32(0x01C)
+#define GPTIMER1_TWER		GPT1_REG32(0x020)
+#define GPTIMER1_TCLR		GPT1_REG32(0x024)
+#define GPTIMER1_TCRR		GPT1_REG32(0x028)
+#define GPTIMER1_TLDR		GPT1_REG32(0x02C)
+#define GPTIMER1_TTGR		GPT1_REG32(0x030)
+#define GPTIMER1_TWPS		GPT1_REG32(0x034)
+#define GPTIMER1_TMAR		GPT1_REG32(0x038)
+#define GPTIMER1_TCAR1		GPT1_REG32(0x03C)
+#define GPTIMER1_TSICR		GPT1_REG32(0x040)
+#define GPTIMER1_TCAR2		GPT1_REG32(0x044)
+
+/* rkw -- base fix up please... */
+#define GPTIMER3_TISR		__REG32(OMAP24XX_L4_IO_BASE+0x78018)
+
+/* SDRC */
+#define SDRC_DLLA_CTRL		__REG32(OMAP24XX_SDRC_BASE+0x060)
+#define SDRC_DLLA_STATUS	__REG32(OMAP24XX_SDRC_BASE+0x064)
+#define SDRC_DLLB_CTRL		__REG32(OMAP24XX_SDRC_BASE+0x068)
+#define SDRC_DLLB_STATUS	__REG32(OMAP24XX_SDRC_BASE+0x06C)
+#define SDRC_POWER		__REG32(OMAP24XX_SDRC_BASE+0x070)
+#define SDRC_MR_0		__REG32(OMAP24XX_SDRC_BASE+0x084)
+
+/* GPIO 1 */
+#define GPIO1_BASE		GPIOX_BASE(1)
+#define GPIO1_REG32(offset)	__REG32(GPIO1_BASE + (offset))
+#define GPIO1_IRQENABLE1	GPIO1_REG32(0x01C)
+#define GPIO1_IRQSTATUS1	GPIO1_REG32(0x018)
+#define GPIO1_IRQENABLE2	GPIO1_REG32(0x02C)
+#define GPIO1_IRQSTATUS2	GPIO1_REG32(0x028)
+#define GPIO1_WAKEUPENABLE	GPIO1_REG32(0x020)
+#define GPIO1_RISINGDETECT	GPIO1_REG32(0x048)
+#define GPIO1_DATAIN		GPIO1_REG32(0x038)
+#define GPIO1_OE		GPIO1_REG32(0x034)
+#define GPIO1_DATAOUT		GPIO1_REG32(0x03C)
+
+/* GPIO2 */
+#define GPIO2_BASE		GPIOX_BASE(2)
+#define GPIO2_REG32(offset)	__REG32(GPIO2_BASE + (offset))
+#define GPIO2_IRQENABLE1	GPIO2_REG32(0x01C)
+#define GPIO2_IRQSTATUS1	GPIO2_REG32(0x018)
+#define GPIO2_IRQENABLE2	GPIO2_REG32(0x02C)
+#define GPIO2_IRQSTATUS2	GPIO2_REG32(0x028)
+#define GPIO2_WAKEUPENABLE	GPIO2_REG32(0x020)
+#define GPIO2_RISINGDETECT	GPIO2_REG32(0x048)
+#define GPIO2_DATAIN		GPIO2_REG32(0x038)
+#define GPIO2_OE		GPIO2_REG32(0x034)
+#define GPIO2_DATAOUT		GPIO2_REG32(0x03C)
+
+/* GPIO 3 */
+#define GPIO3_BASE		GPIOX_BASE(3)
+#define GPIO3_REG32(offset)	__REG32(GPIO3_BASE + (offset))
+#define GPIO3_IRQENABLE1	GPIO3_REG32(0x01C)
+#define GPIO3_IRQSTATUS1	GPIO3_REG32(0x018)
+#define GPIO3_IRQENABLE2	GPIO3_REG32(0x02C)
+#define GPIO3_IRQSTATUS2	GPIO3_REG32(0x028)
+#define GPIO3_WAKEUPENABLE	GPIO3_REG32(0x020)
+#define GPIO3_RISINGDETECT	GPIO3_REG32(0x048)
+#define GPIO3_FALLINGDETECT	GPIO3_REG32(0x04C)
+#define GPIO3_DATAIN		GPIO3_REG32(0x038)
+#define GPIO3_OE		GPIO3_REG32(0x034)
+#define GPIO3_DATAOUT		GPIO3_REG32(0x03C)
+#define GPIO3_DEBOUNCENABLE	GPIO3_REG32(0x050)
+#define GPIO3_DEBOUNCINGTIME	GPIO3_REG32(0x054)
+
+/* GPIO 4 */
+#define GPIO4_BASE		GPIOX_BASE(4)
+#define GPIO4_REG32(offset)	__REG32(GPIO4_BASE + (offset))
+#define GPIO4_IRQENABLE1	GPIO4_REG32(0x01C)
+#define GPIO4_IRQSTATUS1	GPIO4_REG32(0x018)
+#define GPIO4_IRQENABLE2	GPIO4_REG32(0x02C)
+#define GPIO4_IRQSTATUS2	GPIO4_REG32(0x028)
+#define GPIO4_WAKEUPENABLE	GPIO4_REG32(0x020)
+#define GPIO4_RISINGDETECT	GPIO4_REG32(0x048)
+#define GPIO4_FALLINGDETECT	GPIO4_REG32(0x04C)
+#define GPIO4_DATAIN		GPIO4_REG32(0x038)
+#define GPIO4_OE		GPIO4_REG32(0x034)
+#define GPIO4_DATAOUT		GPIO4_REG32(0x03C)
+#define GPIO4_DEBOUNCENABLE	GPIO4_REG32(0x050)
+#define GPIO4_DEBOUNCINGTIME	GPIO4_REG32(0x054)
+
+
+/* IO CONFIG */
+#define CONTROL_BASE		(OMAP24XX_CTRL_BASE)
+#define CONTROL_REG32(offset)	__REG32(CONTROL_BASE + (offset))
+
+#define CONTROL_PADCONF_SPI1_NCS2	CONTROL_REG32(0x104)
+#define CONTROL_PADCONF_SYS_XTALOUT	CONTROL_REG32(0x134)
+#define CONTROL_PADCONF_UART1_RX	CONTROL_REG32(0x0C8)
+#define CONTROL_PADCONF_MCBSP1_DX	CONTROL_REG32(0x10C)
+#define CONTROL_PADCONF_GPMC_NCS4	CONTROL_REG32(0x090)
+#define CONTROL_PADCONF_DSS_D5		CONTROL_REG32(0x0B8)
+#define CONTROL_PADCONF_DSS_D9		CONTROL_REG32(0x0BC)
+#define CONTROL_PADCONF_DSS_D13		CONTROL_REG32(0x0C0)
+#define CONTROL_PADCONF_DSS_VSYNC	CONTROL_REG32(0x0CC)
+
+/* CONTROL */
+#define CONTROL_DEVCONF		CONTROL_REG32(0x274)
+
+/* INTERRUPT CONTROLLER */
+#define INTC_BASE		(OMAP24XX_L4_IO_BASE+0xfe000)
+#define INTC_REG32(offset)	__REG32(INTC_BASE + (offset))
+
+#define INTC1_U_BASE		INTC_REG32(0x000)
+#define INTC_MIR0		INTC_REG32(0x084)
+#define INTC_MIR_SET0		INTC_REG32(0x08C)
+#define INTC_MIR_CLEAR0		INTC_REG32(0x088)
+#define INTC_ISR_CLEAR0		INTC_REG32(0x094)
+#define INTC_MIR1		INTC_REG32(0x0A4)
+#define INTC_MIR_SET1		INTC_REG32(0x0AC)
+#define INTC_MIR_CLEAR1		INTC_REG32(0x0A8)
+#define INTC_ISR_CLEAR1		INTC_REG32(0x0B4)
+#define INTC_MIR2		INTC_REG32(0x0C4)
+#define INTC_MIR_SET2		INTC_REG32(0x0CC)
+#define INTC_MIR_CLEAR2		INTC_REG32(0x0C8)
+#define INTC_ISR_CLEAR2		INTC_REG32(0x0D4)
+#define INTC_SIR_IRQ		INTC_REG32(0x040)
+#define INTC_CONTROL		INTC_REG32(0x048)
+#define INTC_ILR11		INTC_REG32(0x12C)
+#define INTC_ILR32		INTC_REG32(0x180)
+#define INTC_ILR37		INTC_REG32(0x194)
+#define INTC_SYSCONFIG		INTC_REG32(0x010)
+
+/* RAM FIREWALL */
+#define RAMFW_BASE		(0x68005000)
+#define RAMFW_REG32(offset)	__REG32(RAMFW_BASE + (offset))
+
+#define RAMFW_REQINFOPERM0	RAMFW_REG32(0x048)
+#define RAMFW_READPERM0		RAMFW_REG32(0x050)
+#define RAMFW_WRITEPERM0	RAMFW_REG32(0x058)
+
+/* GPMC CS1 FPGA ON USER INTERFACE MODULE */
+//#define DEBUG_BOARD_LED_REGISTER 0x04000014
+
+/* GPMC CS0 */
+#define GPMC_CONFIG1_0		GPMC_REG32(0x060)
+#define GPMC_CONFIG2_0		GPMC_REG32(0x064)
+#define GPMC_CONFIG3_0		GPMC_REG32(0x068)
+#define GPMC_CONFIG4_0		GPMC_REG32(0x06C)
+#define GPMC_CONFIG5_0		GPMC_REG32(0x070)
+#define GPMC_CONFIG6_0		GPMC_REG32(0x074)
+#define GPMC_CONFIG7_0		GPMC_REG32(0x078)
+
+/* DSS */
+#define DSS_CONTROL		DISP_REG32(0x040)
+#define DISPC_CONTROL		DISP_REG32(0x440)
+#define DISPC_SYSSTATUS		DISP_REG32(0x414)
+#define DISPC_IRQSTATUS		DISP_REG32(0x418)
+#define DISPC_IRQENABLE		DISP_REG32(0x41C)
+#define DISPC_CONFIG		DISP_REG32(0x444)
+#define DISPC_DEFAULT_COLOR0	DISP_REG32(0x44C)
+#define DISPC_DEFAULT_COLOR1	DISP_REG32(0x450)
+#define DISPC_TRANS_COLOR0	DISP_REG32(0x454)
+#define DISPC_TRANS_COLOR1	DISP_REG32(0x458)
+#define DISPC_LINE_NUMBER	DISP_REG32(0x460)
+#define DISPC_TIMING_H		DISP_REG32(0x464)
+#define DISPC_TIMING_V		DISP_REG32(0x468)
+#define DISPC_POL_FREQ		DISP_REG32(0x46C)
+#define DISPC_DIVISOR		DISP_REG32(0x470)
+#define DISPC_SIZE_DIG		DISP_REG32(0x478)
+#define DISPC_SIZE_LCD		DISP_REG32(0x47C)
+#define DISPC_GFX_BA0		DISP_REG32(0x480)
+#define DISPC_GFX_BA1		DISP_REG32(0x484)
+#define DISPC_GFX_POSITION	DISP_REG32(0x488)
+#define DISPC_GFX_SIZE		DISP_REG32(0x48C)
+#define DISPC_GFX_ATTRIBUTES	DISP_REG32(0x4A0)
+#define DISPC_GFX_FIFO_THRESHOLD	DISP_REG32(0x4A4)
+#define DISPC_GFX_ROW_INC	DISP_REG32(0x4AC)
+#define DISPC_GFX_PIXEL_INC	DISP_REG32(0x4B0)
+#define DISPC_GFX_WINDOW_SKIP	DISP_REG32(0x4B4)
+#define DISPC_GFX_TABLE_BA	DISP_REG32(0x4B8)
+#define DISPC_DATA_CYCLE1	DISP_REG32(0x5D4)
+#define DISPC_DATA_CYCLE2	DISP_REG32(0x5D8)
+#define DISPC_DATA_CYCLE3	DISP_REG32(0x5DC)
+
+/* Wake up define for board */
+#define GPIO97			(1 << 1)
+#define GPIO88			(1 << 24)
+
+#endif /* __ASSEMBLER__ */
+
+#endif
+
+
+
+
+
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
new file mode 100644
index 000000000000..f4df04fe1dd8
--- /dev/null
+++ b/arch/arm/mach-omap2/serial.c
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-omap/omap2/serial.c
+ *
+ * OMAP2 serial support.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * Based off of arch/arm/mach-omap/omap1/serial.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
+#include <asm/io.h>
+#include <asm/hardware/clock.h>
+
+#include <asm/arch/common.h>
+#include <asm/arch/board.h>
+
+static struct clk * uart1_ick = NULL;
+static struct clk * uart1_fck = NULL;
+static struct clk * uart2_ick = NULL;
+static struct clk * uart2_fck = NULL;
+static struct clk * uart3_ick = NULL;
+static struct clk * uart3_fck = NULL;
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= (char *)IO_ADDRESS(OMAP_UART1_BASE),
+		.mapbase	= (unsigned long)OMAP_UART1_BASE,
+		.irq		= 72,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	}, {
+		.membase	= (char *)IO_ADDRESS(OMAP_UART2_BASE),
+		.mapbase	= (unsigned long)OMAP_UART2_BASE,
+		.irq		= 73,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	}, {
+		.membase	= (char *)IO_ADDRESS(OMAP_UART3_BASE),
+		.mapbase	= (unsigned long)OMAP_UART3_BASE,
+		.irq		= 74,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	}, {
+		.flags		= 0
+	}
+};
+
+static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+					   int offset)
+{
+	offset <<= up->regshift;
+	return (unsigned int)__raw_readb(up->membase + offset);
+}
+
+static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+				    int value)
+{
+	offset <<= p->regshift;
+	__raw_writeb(value, (unsigned long)(p->membase + offset));
+}
+
+/*
+ * Internal UARTs need to be initialized for the 8250 autoconfig to work
+ * properly. Note that the TX watermark initialization may not be needed
+ * once the 8250.c watermark handling code is merged.
+ */
+static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+{
+	serial_write_reg(p, UART_OMAP_MDR1, 0x07);
+	serial_write_reg(p, UART_OMAP_SCR, 0x08);
+	serial_write_reg(p, UART_OMAP_MDR1, 0x00);
+	serial_write_reg(p, UART_OMAP_SYSC, 0x01);
+}
+
+void __init omap_serial_init()
+{
+	int i;
+	const struct omap_uart_config *info;
+
+	/*
+	 * Make sure the serial ports are muxed on at this point.
+	 * You have to mux them off in device drivers later on
+	 * if not needed.
+	 */
+
+	info = omap_get_config(OMAP_TAG_UART,
+			       struct omap_uart_config);
+
+	if (info == NULL)
+		return;
+
+	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+		struct plat_serial8250_port *p = serial_platform_data + i;
+
+		if (!(info->enabled_uarts & (1 << i))) {
+			p->membase = 0;
+			p->mapbase = 0;
+			continue;
+		}
+
+		switch (i) {
+		case 0:
+			uart1_ick = clk_get(NULL, "uart1_ick");
+			if (IS_ERR(uart1_ick))
+				printk("Could not get uart1_ick\n");
+			else {
+				clk_use(uart1_ick);
+			}
+
+			uart1_fck = clk_get(NULL, "uart1_fck");
+			if (IS_ERR(uart1_fck))
+				printk("Could not get uart1_fck\n");
+			else {
+				clk_use(uart1_fck);
+			}
+			break;
+		case 1:
+			uart2_ick = clk_get(NULL, "uart2_ick");
+			if (IS_ERR(uart2_ick))
+				printk("Could not get uart2_ick\n");
+			else {
+				clk_use(uart2_ick);
+			}
+
+			uart2_fck = clk_get(NULL, "uart2_fck");
+			if (IS_ERR(uart2_fck))
+				printk("Could not get uart2_fck\n");
+			else {
+				clk_use(uart2_fck);
+			}
+			break;
+		case 2:
+			uart3_ick = clk_get(NULL, "uart3_ick");
+			if (IS_ERR(uart3_ick))
+				printk("Could not get uart3_ick\n");
+			else {
+				clk_use(uart3_ick);
+			}
+
+			uart3_fck = clk_get(NULL, "uart3_fck");
+			if (IS_ERR(uart3_fck))
+				printk("Could not get uart3_fck\n");
+			else {
+				clk_use(uart3_fck);
+			}
+			break;
+		}
+
+		omap_serial_reset(p);
+	}
+}
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static int __init omap_init(void)
+{
+	return platform_device_register(&serial_device);
+}
+arch_initcall(omap_init);
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S
new file mode 100644
index 000000000000..2a869e203342
--- /dev/null
+++ b/arch/arm/mach-omap2/sram-fn.S
@@ -0,0 +1,333 @@
+/*
+ * linux/arch/arm/mach-omap1/sram.S
+ *
+ * Omap2 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/arch/io.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/prcm.h>
+
+#define TIMER_32KSYNCT_CR_V	IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010)
+
+#define CM_CLKSEL2_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544)
+#define PRCM_VOLTCTRL_V		IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050)
+#define PRCM_CLKCFG_CTRL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080)
+#define CM_CLKEN_PLL_V		IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500)
+#define CM_IDLEST_CKGEN_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520)
+#define CM_CLKSEL1_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540)
+
+#define SDRC_DLLA_CTRL_V	IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060)
+#define SDRC_RFR_CTRL_V		IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4)
+
+	.text
+
+ENTRY(sram_ddr_init)
+	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
+
+	mov	r12, r2			@ capture CS1 vs CS0
+	mov	r8, r3			@ capture force parameter
+
+	/* frequency shift down */
+	ldr	r2, cm_clksel2_pll	@ get address of dpllout reg
+	mov	r3, #0x1		@ value for 1x operation
+	str	r3, [r2]		@ go to L1-freq operation
+
+	/* voltage shift down */
+	mov r9, #0x1			@ set up for L1 voltage call
+	bl voltage_shift		@ go drop voltage
+
+	/* dll lock mode */
+	ldr	r11, sdrc_dlla_ctrl	@ addr of dlla ctrl
+	ldr	r10, [r11]		@ get current val
+	cmp	r12, #0x1		@ cs1 base (2422 es2.05/1)
+	addeq	r11, r11, #0x8		@ if cs1 base, move to DLLB
+	mvn	r9, #0x4		@ mask to get clear bit2
+	and	r10, r10, r9		@ clear bit2 for lock mode.
+	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
+	orr	r10, r10, #0x2		@ 90 degree phase for all below 133Mhz
+	str	r10, [r11]		@ commit to DLLA_CTRL
+	bl	i_dll_wait		@ wait for dll to lock
+
+	/* get dll value */
+	add	r11, r11, #0x4		@ get addr of status reg
+	ldr	r10, [r11]		@ get locked value
+
+	/* voltage shift up */
+	mov r9, #0x0			@ shift back to L0-voltage
+	bl voltage_shift		@ go raise voltage
+
+	/* frequency shift up */
+	mov	r3, #0x2		@ value for 2x operation
+	str	r3, [r2]		@ go to L0-freq operation
+
+	/* reset entry mode for dllctrl */
+	sub	r11, r11, #0x4		@ move from status to ctrl
+	cmp	r12, #0x1		@ normalize if cs1 based
+	subeq	r11, r11, #0x8		@ possibly back to DLLA
+	cmp	r8, #0x1		@ if forced unlock exit
+	orreq	r1, r1, #0x4		@ make sure exit with unlocked value
+	str	r1, [r11]		@ restore DLLA_CTRL high value
+	add	r11, r11, #0x8		@ move to DLLB_CTRL addr
+	str	r1, [r11]		@ set value DLLB_CTRL
+	bl	i_dll_wait		@ wait for possible lock
+
+	/* set up for return, DDR should be good */
+	str r10, [r0]			@ write dll_status and return counter
+	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
+
+	/* ensure the DLL has relocked */
+i_dll_wait:
+	mov	r4, #0x800		@ delay DLL relock, min 0x400 L3 clocks
+i_dll_delay:
+	subs	r4, r4, #0x1
+	bne	i_dll_delay
+	mov	pc, lr
+
+	/*
+	 * shift up or down voltage, use R9 as input to tell level.
+	 * wait for it to finish, use 32k sync counter, 1tick=31uS.
+	 */
+voltage_shift:
+	ldr	r4, prcm_voltctrl	@ get addr of volt ctrl.
+	ldr	r5, [r4]		@ get value.
+	ldr	r6, prcm_mask_val	@ get value of mask
+	and	r5, r5, r6		@ apply mask to clear bits
+	orr	r5, r5, r9		@ bulld value for L0/L1-volt operation.
+	str	r5, [r4]		@ set up for change.
+	mov	r3, #0x4000		@ get val for force
+	orr	r5, r5, r3		@ build value for force
+	str	r5, [r4]		@ Force transition to L1
+
+	ldr	r3, timer_32ksynct_cr	@ get addr of counter
+	ldr	r5, [r3]		@ get value
+	add	r5, r5, #0x3		@ give it at most 93uS
+volt_delay:
+	ldr	r7, [r3]		@ get timer value
+	cmp	r5, r7			@ time up?
+	bhi	volt_delay		@ not yet->branch
+	mov	pc, lr			@ back to caller.
+
+/* relative load constants */
+cm_clksel2_pll:
+	.word CM_CLKSEL2_PLL_V
+sdrc_dlla_ctrl:
+	.word SDRC_DLLA_CTRL_V
+prcm_voltctrl:
+	.word PRCM_VOLTCTRL_V
+prcm_mask_val:
+	.word 0xFFFF3FFC
+timer_32ksynct_cr:
+	.word TIMER_32KSYNCT_CR_V
+ENTRY(sram_ddr_init_sz)
+	.word	. - sram_ddr_init
+
+/*
+ * Reprograms memory timings.
+ * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
+ * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
+ */
+ENTRY(sram_reprogram_sdrc)
+	stmfd	sp!, {r0 - r10, lr}	@ save registers on stack
+	mov	r3, #0x0		@ clear for mrc call
+	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, finish ARM SDR/DDR
+	nop
+	nop
+	ldr	r6, ddr_sdrc_rfr_ctrl	@ get addr of refresh reg
+	ldr	r5, [r6]		@ get value
+	mov	r5, r5, lsr #8		@ isolate rfr field and drop burst
+
+	cmp	r0, #0x1		@ going to half speed?
+	movne	r9, #0x0		@ if up set flag up for pre up, hi volt
+
+	blne	voltage_shift_c		@ adjust voltage
+
+	cmp	r0, #0x1		@ going to half speed (post branch link)
+	moveq	r5, r5, lsr #1		@ divide by 2 if to half
+	movne	r5, r5, lsl #1		@ mult by 2 if to full
+	mov	r5, r5, lsl #8		@ put rfr field back into place
+	add	r5, r5, #0x1		@ turn on burst of 1
+	ldr	r4, ddr_cm_clksel2_pll	@ get address of out reg
+	ldr	r3, [r4]		@ get curr value
+	orr	r3, r3, #0x3
+	bic	r3, r3, #0x3		@ clear lower bits
+	orr	r3, r3, r0		@ new state value
+	str	r3, [r4]		@ set new state (pll/x, x=1 or 2)
+	nop
+	nop
+
+	moveq	r9, #0x1		@ if speed down, post down, drop volt
+	bleq	voltage_shift_c
+
+	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier
+	str	r5, [r6]		@ set new RFR_1 value
+	add	r6, r6, #0x30		@ get RFR_2 addr
+	str	r5, [r6]		@ set RFR_2
+	nop
+	cmp	r2, #0x1		@ (SDR or DDR) do we need to adjust DLL
+	bne	freq_out		@ leave if SDR, no DLL function
+
+	/* With DDR, we need to take care of the DLL for the frequency change */
+	ldr	r2, ddr_sdrc_dlla_ctrl	@ addr of dlla ctrl
+	str	r1, [r2]		@ write out new SDRC_DLLA_CTRL
+	add	r2, r2, #0x8		@ addr to SDRC_DLLB_CTRL
+	str	r1, [r2]		@ commit to SDRC_DLLB_CTRL
+	mov	r1, #0x2000		@ wait DLL relock, min 0x400 L3 clocks
+dll_wait:
+	subs	r1, r1, #0x1
+	bne	dll_wait
+freq_out:
+	ldmfd	sp!, {r0 - r10, pc}	@ restore regs and return
+
+    /*
+     * shift up or down voltage, use R9 as input to tell level.
+     *	wait for it to finish, use 32k sync counter, 1tick=31uS.
+     */
+voltage_shift_c:
+	ldr	r10, ddr_prcm_voltctrl	@ get addr of volt ctrl
+	ldr	r8, [r10]		@ get value
+	ldr	r7, ddr_prcm_mask_val	@ get value of mask
+	and	r8, r8, r7		@ apply mask to clear bits
+	orr	r8, r8, r9		@ bulld value for L0/L1-volt operation.
+	str	r8, [r10]		@ set up for change.
+	mov	r7, #0x4000		@ get val for force
+	orr	r8, r8, r7		@ build value for force
+	str	r8, [r10]		@ Force transition to L1
+
+	ldr	r10, ddr_timer_32ksynct	@ get addr of counter
+	ldr	r8, [r10]		@ get value
+	add	r8, r8, #0x2		@ give it at most 62uS (min 31+)
+volt_delay_c:
+	ldr	r7, [r10]		@ get timer value
+	cmp	r8, r7			@ time up?
+	bhi	volt_delay_c		@ not yet->branch
+	mov	pc, lr			@ back to caller
+
+ddr_cm_clksel2_pll:
+	.word CM_CLKSEL2_PLL_V
+ddr_sdrc_dlla_ctrl:
+	.word SDRC_DLLA_CTRL_V
+ddr_sdrc_rfr_ctrl:
+	.word SDRC_RFR_CTRL_V
+ddr_prcm_voltctrl:
+	.word PRCM_VOLTCTRL_V
+ddr_prcm_mask_val:
+	.word 0xFFFF3FFC
+ddr_timer_32ksynct:
+	.word TIMER_32KSYNCT_CR_V
+
+ENTRY(sram_reprogram_sdrc_sz)
+	.word	. - sram_reprogram_sdrc
+
+/*
+ * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
+ */
+ENTRY(sram_set_prcm)
+	stmfd	sp!, {r0-r12, lr}	@ regs to stack
+	adr	r4, pbegin		@ addr of preload start
+	adr	r8, pend		@ addr of preload end
+	mcrr	p15, 1, r8, r4, c12	@ preload into icache
+pbegin:
+	/* move into fast relock bypass */
+	ldr	r8, pll_ctl		@ get addr
+	ldr	r5, [r8]		@ get val
+	mvn	r6, #0x3		@ clear mask
+	and	r5, r5, r6		@ clear field
+	orr	r7, r5, #0x2		@ fast relock val
+	str	r7, [r8]		@ go to fast relock
+	ldr	r4, pll_stat		@ addr of stat
+block:
+	/* wait for bypass */
+	ldr	r8, [r4]		@ stat value
+	and	r8, r8, #0x3		@ mask for stat
+	cmp	r8, #0x1		@ there yet
+	bne	block			@ loop if not
+
+	/* set new dpll dividers _after_ in bypass */
+	ldr	r4, pll_div		@ get addr
+	str	r0, [r4]		@ set dpll ctrl val
+
+	ldr	r4, set_config		@ get addr
+	mov	r8, #1			@ valid cfg msk
+	str	r8, [r4]		@ make dividers take
+
+	mov	r4, #100		@ dead spin a bit
+wait_a_bit:
+	subs	r4, r4, #1		@ dec loop
+	bne	wait_a_bit		@ delay done?
+
+	/* check if staying in bypass */
+	cmp	r2, #0x1		@ stay in bypass?
+	beq	pend			@ jump over dpll relock
+
+	/* relock DPLL with new vals */
+	ldr	r5, pll_stat		@ get addr
+	ldr	r4, pll_ctl		@ get addr
+	orr	r8, r7, #0x3		@ val for lock dpll
+	str	r8, [r4]		@ set val
+	mov	r0, #1000		@ dead spin a bit
+wait_more:
+	subs	r0, r0, #1		@ dec loop
+	bne	wait_more		@ delay done?
+wait_lock:
+	ldr	r8, [r5]		@ get lock val
+	and	r8, r8, #3		@ isolate field
+	cmp	r8, #2			@ locked?
+	bne	wait_lock		@ wait if not
+pend:
+	/* update memory timings & briefly lock dll */
+	ldr	r4, sdrc_rfr		@ get addr
+	str	r1, [r4]		@ update refresh timing
+	ldr	r11, dlla_ctrl		@ get addr of DLLA ctrl
+	ldr	r10, [r11]		@ get current val
+	mvn	r9, #0x4		@ mask to get clear bit2
+	and	r10, r10, r9		@ clear bit2 for lock mode
+	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
+	str	r10, [r11]		@ commit to DLLA_CTRL
+	add	r11, r11, #0x8		@ move to dllb
+	str	r10, [r11]		@ hit DLLB also
+
+	mov	r4, #0x800		@ relock time (min 0x400 L3 clocks)
+wait_dll_lock:
+	subs	r4, r4, #0x1
+	bne	wait_dll_lock
+	nop
+	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
+
+set_config:
+	.word PRCM_CLKCFG_CTRL_V
+pll_ctl:
+	.word CM_CLKEN_PLL_V
+pll_stat:
+	.word CM_IDLEST_CKGEN_V
+pll_div:
+	.word CM_CLKSEL1_PLL_V
+sdrc_rfr:
+	.word SDRC_RFR_CTRL_V
+dlla_ctrl:
+	.word SDRC_DLLA_CTRL_V
+
+ENTRY(sram_set_prcm_sz)
+	.word	. - sram_set_prcm
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
new file mode 100644
index 000000000000..9ec11443200f
--- /dev/null
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -0,0 +1,126 @@
+/*
+ * linux/arch/arm/mach-omap2/timer-gp.c
+ *
+ * OMAP2 GP timer support.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *         Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * Some parts based off of TI's 24xx code:
+ *
+ *   Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * Roughly modelled after the OMAP1 MPU timer code.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <asm/mach/time.h>
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/hardware/clock.h>
+
+#define OMAP2_GP_TIMER1_BASE	0x48028000
+#define OMAP2_GP_TIMER2_BASE	0x4802a000
+#define OMAP2_GP_TIMER3_BASE	0x48078000
+#define OMAP2_GP_TIMER4_BASE	0x4807a000
+
+#define GP_TIMER_TIDR		0x00
+#define GP_TIMER_TISR		0x18
+#define GP_TIMER_TIER		0x1c
+#define GP_TIMER_TCLR		0x24
+#define GP_TIMER_TCRR		0x28
+#define GP_TIMER_TLDR		0x2c
+#define GP_TIMER_TSICR		0x40
+
+#define OS_TIMER_NR		1  /* GP timer 2 */
+
+static unsigned long timer_base[] = {
+	IO_ADDRESS(OMAP2_GP_TIMER1_BASE),
+	IO_ADDRESS(OMAP2_GP_TIMER2_BASE),
+	IO_ADDRESS(OMAP2_GP_TIMER3_BASE),
+	IO_ADDRESS(OMAP2_GP_TIMER4_BASE),
+};
+
+static inline unsigned int timer_read_reg(int nr, unsigned int reg)
+{
+	return __raw_readl(timer_base[nr] + reg);
+}
+
+static inline void timer_write_reg(int nr, unsigned int reg, unsigned int val)
+{
+	__raw_writel(val, timer_base[nr] + reg);
+}
+
+/* Note that we always enable the clock prescale divider bit */
+static inline void omap2_gp_timer_start(int nr, unsigned long load_val)
+{
+	unsigned int tmp;
+
+	tmp = 0xffffffff - load_val;
+
+	timer_write_reg(nr, GP_TIMER_TLDR, tmp);
+	timer_write_reg(nr, GP_TIMER_TCRR, tmp);
+	timer_write_reg(nr, GP_TIMER_TIER, 1 << 1);
+	timer_write_reg(nr, GP_TIMER_TCLR, (1 << 5) | (1 << 1) | 1);
+}
+
+static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
+					    struct pt_regs *regs)
+{
+	write_seqlock(&xtime_lock);
+
+	timer_write_reg(OS_TIMER_NR, GP_TIMER_TISR, 1 << 1);
+	timer_tick(regs);
+
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction omap2_gp_timer_irq = {
+	.name		= "gp timer",
+	.flags		= SA_INTERRUPT,
+	.handler	= omap2_gp_timer_interrupt,
+};
+
+static void __init omap2_gp_timer_init(void)
+{
+	struct clk * sys_ck;
+	u32 tick_period = 120000;
+	u32 l;
+
+	/* Reset clock and prescale value */
+	timer_write_reg(OS_TIMER_NR, GP_TIMER_TCLR, 0);
+
+	sys_ck = clk_get(NULL, "sys_ck");
+	if (IS_ERR(sys_ck))
+		printk(KERN_ERR "Could not get sys_ck\n");
+	else {
+		clk_use(sys_ck);
+		tick_period = clk_get_rate(sys_ck) / 100;
+		clk_put(sys_ck);
+	}
+
+	tick_period /= 2;	/* Minimum prescale divider is 2 */
+	tick_period -= 1;
+
+	l = timer_read_reg(OS_TIMER_NR, GP_TIMER_TIDR);
+	printk(KERN_INFO "OMAP2 GP timer (HW version %d.%d)\n",
+	       (l >> 4) & 0x0f, l & 0x0f);
+
+	setup_irq(38, &omap2_gp_timer_irq);
+
+	omap2_gp_timer_start(OS_TIMER_NR, tick_period);
+}
+
+struct sys_timer omap_timer = {
+	.init	= omap2_gp_timer_init,
+};
+
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index b380a438e68f..e201aa9765b9 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -60,6 +60,7 @@ config MACH_CORGI
 	bool "Enable Sharp SL-C700 (Corgi) Support"
 	depends PXA_SHARPSL_25x
 	select PXA_SHARP_C7xx
+	select PXA_SSP
 
 config MACH_SHEPHERD
 	bool "Enable Sharp SL-C750 (Shepherd) Support"
@@ -102,12 +103,18 @@ config IWMMXT
 
 config PXA_SHARP_C7xx
 	bool
+	select PXA_SSP
 	help
 	  Enable support for all Sharp C7xx models
 
 config PXA_SHARP_Cxx00
 	bool
+	select PXA_SSP
 	help
 	  Enable common support for Sharp Cxx00 models
 
+config PXA_SSP
+	tristate
+	help
+	  Enable support for PXA2xx SSP ports
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 8bc72d07cea8..d210bd5032ce 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -11,8 +11,8 @@ obj-$(CONFIG_PXA27x) += pxa27x.o
 obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
 obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
 obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
-obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o ssp.o
-obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o ssp.o
+obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o
+obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)         += tosa.o
 
@@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS) += $(led-y)
 
 # Misc features
 obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PXA_SSP) += ssp.o
 
 ifeq ($(CONFIG_PXA27x),y)
 obj-$(CONFIG_PM) += standby.o
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 591e5f32dbec..bdf10cfa9440 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -203,7 +203,7 @@ static int __init corgi_ssp_probe(struct device *dev)
 	GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846);  /* output */
 	GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);   /* High - Disable ADS7846*/
 
-	ret = ssp_init(&corgi_ssp_dev,ssp_machinfo->port);
+	ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
 
 	if (ret)
 		printk(KERN_ERR "Unable to register SSP handler!\n");
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 3977a77aacdd..4879c0f7da72 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -32,3 +32,90 @@ void corgi_put_hsync(void);
 void spitz_put_hsync(void);
 void corgi_wait_hsync(void);
 void spitz_wait_hsync(void);
+
+/*
+ * SharpSL Battery/PM Driver
+ */
+
+struct sharpsl_charger_machinfo {
+	void (*init)(void);
+	int gpio_acin;
+	int gpio_batfull;
+	int gpio_batlock;
+	int gpio_fatal;
+	int (*status_acin)(void);
+	void (*discharge)(int);
+	void (*discharge1)(int);
+	void (*charge)(int);
+	void (*chargeled)(int);
+	void (*measure_temp)(int);
+	void (*presuspend)(void);
+	void (*postsuspend)(void);
+	unsigned long (*charger_wakeup)(void);
+	int (*should_wakeup)(unsigned int resume_on_alarm);
+	int bat_levels;
+	struct battery_thresh *bat_levels_noac;
+	struct battery_thresh *bat_levels_acin;
+	int status_high_acin;
+	int status_low_acin;
+	int status_high_noac;
+	int status_low_noac;
+};
+
+struct battery_thresh {
+	int voltage;
+	int percentage;
+};
+
+struct battery_stat {
+	int ac_status;         /* APM AC Present/Not Present */
+	int mainbat_status;    /* APM Main Battery Status */
+	int mainbat_percent;   /* Main Battery Percentage Charge */
+	int mainbat_voltage;   /* Main Battery Voltage */
+};
+
+struct sharpsl_pm_status {
+	struct device *dev;
+	struct timer_list ac_timer;
+	struct timer_list chrg_full_timer;
+
+	int charge_mode;
+#define CHRG_ERROR    (-1)
+#define CHRG_OFF      (0)
+#define CHRG_ON       (1)
+#define CHRG_DONE     (2)
+
+	unsigned int flags;
+#define SHARPSL_SUSPENDED       (1 << 0)  /* Device is Suspended */
+#define SHARPSL_ALARM_ACTIVE    (1 << 1)  /* Alarm is for charging event (not user) */
+#define SHARPSL_BL_LIMIT        (1 << 2)  /* Backlight Intensity Limited */
+#define SHARPSL_APM_QUEUED      (1 << 3)  /* APM Event Queued */
+#define SHARPSL_DO_OFFLINE_CHRG (1 << 4)  /* Trigger the offline charger */
+
+	int full_count;
+	unsigned long charge_start_time;
+	struct sharpsl_charger_machinfo *machinfo;
+	struct battery_stat battstat;
+};
+
+extern struct sharpsl_pm_status sharpsl_pm;
+extern struct battery_thresh spitz_battery_levels_acin[];
+extern struct battery_thresh spitz_battery_levels_noac[];
+
+#define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
+
+#define SHARPSL_LED_ERROR  2
+#define SHARPSL_LED_ON     1
+#define SHARPSL_LED_OFF    0
+
+#define CHARGE_ON()         sharpsl_pm.machinfo->charge(1)
+#define CHARGE_OFF()        sharpsl_pm.machinfo->charge(0)
+#define CHARGE_LED_ON()     sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ON)
+#define CHARGE_LED_OFF()    sharpsl_pm.machinfo->chargeled(SHARPSL_LED_OFF)
+#define CHARGE_LED_ERR()    sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR)
+#define DISCHARGE_ON()      sharpsl_pm.machinfo->discharge(1)
+#define DISCHARGE_OFF()     sharpsl_pm.machinfo->discharge(0)
+#define STATUS_AC_IN        sharpsl_pm.machinfo->status_acin()
+#define STATUS_BATT_LOCKED  READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock)
+#define STATUS_CHRG_FULL    READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull)
+#define STATUS_FATAL        READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal)
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
new file mode 100644
index 000000000000..6c9e871c53d8
--- /dev/null
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -0,0 +1,992 @@
+/*
+ * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
+ * series of PDAs
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on code written by Sharp for 2.4 kernels
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/apm_bios.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/scoop.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/apm.h>
+
+#include <asm/arch/pm.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/sharpsl.h>
+#include "sharpsl.h"
+
+/*
+ * Constants
+ */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
+#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
+#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
+#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
+#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
+#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD  10  /* 10 msec */
+#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
+#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
+#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
+
+#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
+#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
+#define SHARPSL_CHARGE_ON_JKVAD_HIGH   0x9b  /* 6V */
+#define SHARPSL_CHARGE_ON_JKVAD_LOW    0x34  /* 2V */
+#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
+#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
+
+struct battery_thresh spitz_battery_levels_acin[] = {
+	{ 213, 100},
+	{ 212,  98},
+	{ 211,  95},
+	{ 210,  93},
+	{ 209,  90},
+	{ 208,  88},
+	{ 207,  85},
+	{ 206,  83},
+	{ 205,  80},
+	{ 204,  78},
+	{ 203,  75},
+	{ 202,  73},
+	{ 201,  70},
+	{ 200,  68},
+	{ 199,  65},
+	{ 198,  63},
+	{ 197,  60},
+	{ 196,  58},
+	{ 195,  55},
+	{ 194,  53},
+	{ 193,  50},
+	{ 192,  48},
+	{ 192,  45},
+	{ 191,  43},
+	{ 191,  40},
+	{ 190,  38},
+	{ 190,  35},
+	{ 189,  33},
+	{ 188,  30},
+	{ 187,  28},
+	{ 186,  25},
+	{ 185,  23},
+	{ 184,  20},
+	{ 183,  18},
+	{ 182,  15},
+	{ 181,  13},
+	{ 180,  10},
+	{ 179,   8},
+	{ 178,   5},
+	{   0,   0},
+};
+
+struct battery_thresh  spitz_battery_levels_noac[] = {
+	{ 213, 100},
+	{ 212,  98},
+	{ 211,  95},
+	{ 210,  93},
+	{ 209,  90},
+	{ 208,  88},
+	{ 207,  85},
+	{ 206,  83},
+	{ 205,  80},
+	{ 204,  78},
+	{ 203,  75},
+	{ 202,  73},
+	{ 201,  70},
+	{ 200,  68},
+	{ 199,  65},
+	{ 198,  63},
+	{ 197,  60},
+	{ 196,  58},
+	{ 195,  55},
+	{ 194,  53},
+	{ 193,  50},
+	{ 192,  48},
+	{ 191,  45},
+	{ 190,  43},
+	{ 189,  40},
+	{ 188,  38},
+	{ 187,  35},
+	{ 186,  33},
+	{ 185,  30},
+	{ 184,  28},
+	{ 183,  25},
+	{ 182,  23},
+	{ 181,  20},
+	{ 180,  18},
+	{ 179,  15},
+	{ 178,  13},
+	{ 177,  10},
+	{ 176,   8},
+	{ 175,   5},
+	{   0,   0},
+};
+
+/* MAX1111 Commands */
+#define MAXCTRL_PD0      1u << 0
+#define MAXCTRL_PD1      1u << 1
+#define MAXCTRL_SGL      1u << 2
+#define MAXCTRL_UNI      1u << 3
+#define MAXCTRL_SEL_SH   4
+#define MAXCTRL_STR      1u << 7
+
+/* MAX1111 Channel Definitions */
+#define BATT_AD    4u
+#define BATT_THM   2u
+#define JK_VAD     6u
+
+
+/*
+ * Prototypes
+ */
+static int sharpsl_read_MainBattery(void);
+static int sharpsl_off_charge_battery(void);
+static int sharpsl_check_battery(int mode);
+static int sharpsl_ac_check(void);
+static int sharpsl_fatal_check(void);
+static int sharpsl_average_value(int ad);
+static void sharpsl_average_clear(void);
+static void sharpsl_charge_toggle(void *private_);
+static void sharpsl_battery_thread(void *private_);
+
+
+/*
+ * Variables
+ */
+struct sharpsl_pm_status sharpsl_pm;
+DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL);
+DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL);
+
+
+static int get_percentage(int voltage)
+{
+	int i = sharpsl_pm.machinfo->bat_levels - 1;
+	struct battery_thresh *thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		thresh=sharpsl_pm.machinfo->bat_levels_acin;
+	else
+		thresh=sharpsl_pm.machinfo->bat_levels_noac;
+
+	while (i > 0 && (voltage > thresh[i].voltage))
+		i--;
+
+	return thresh[i].percentage;
+}
+
+static int get_apm_status(int voltage)
+{
+	int low_thresh, high_thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON) {
+		high_thresh = sharpsl_pm.machinfo->status_high_acin;
+		low_thresh = sharpsl_pm.machinfo->status_low_acin;
+	} else {
+		high_thresh = sharpsl_pm.machinfo->status_high_noac;
+		low_thresh = sharpsl_pm.machinfo->status_low_noac;
+	}
+
+	if (voltage >= high_thresh)
+		return APM_BATTERY_STATUS_HIGH;
+	if (voltage >= low_thresh)
+		return APM_BATTERY_STATUS_LOW;
+	return APM_BATTERY_STATUS_CRITICAL;
+}
+
+void sharpsl_battery_kick(void)
+{
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
+}
+EXPORT_SYMBOL(sharpsl_battery_kick);
+
+
+static void sharpsl_battery_thread(void *private_)
+{
+	int voltage, percent, apm_status, i = 0;
+
+	if (!sharpsl_pm.machinfo)
+		return;
+
+	sharpsl_pm.battstat.ac_status = (!(STATUS_AC_IN) ? APM_AC_OFFLINE : APM_AC_ONLINE);
+
+	/* Corgi cannot confirm when battery fully charged so periodically kick! */
+	if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON)
+			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
+		schedule_work(&toggle_charger);
+
+	while(1) {
+		voltage = sharpsl_read_MainBattery();
+		if (voltage > 0) break;
+		if (i++ > 5) {
+			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+			break;
+		}
+	}
+
+	voltage = sharpsl_average_value(voltage);
+	apm_status = get_apm_status(voltage);
+	percent = get_percentage(voltage);
+
+	/* At low battery voltages, the voltage has a tendency to start
+           creeping back up so we try to avoid this here */
+	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
+		sharpsl_pm.battstat.mainbat_voltage = voltage;
+		sharpsl_pm.battstat.mainbat_status = apm_status;
+		sharpsl_pm.battstat.mainbat_percent = percent;
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage,
+			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
+
+	/* If battery is low. limit backlight intensity to save power. */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
+			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
+			corgibl_limit_intensity(1);
+			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
+		}
+	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
+		corgibl_limit_intensity(0);
+		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
+	}
+
+	/* Suspend if critical battery level */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		dev_err(sharpsl_pm.dev, "Fatal Off\n");
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
+}
+
+static void sharpsl_charge_on(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
+
+	sharpsl_pm.full_count = 0;
+	sharpsl_pm.charge_mode = CHRG_ON;
+	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
+}
+
+static void sharpsl_charge_off(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
+
+	CHARGE_OFF();
+	CHARGE_LED_OFF();
+	sharpsl_pm.charge_mode = CHRG_OFF;
+
+	schedule_work(&sharpsl_bat);
+}
+
+static void sharpsl_charge_error(void)
+{
+	CHARGE_LED_ERR();
+	CHARGE_OFF();
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+}
+
+static void sharpsl_charge_toggle(void *private_)
+{
+	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+
+	if (STATUS_AC_IN == 0) {
+		sharpsl_charge_off();
+		return;
+	} else if ((sharpsl_check_battery(1) < 0) || (sharpsl_ac_check() < 0)) {
+		sharpsl_charge_error();
+		return;
+	}
+
+	CHARGE_LED_ON();
+	CHARGE_OFF();
+	mdelay(SHARPSL_CHARGE_WAIT_TIME);
+	CHARGE_ON();
+
+	sharpsl_pm.charge_start_time = jiffies;
+}
+
+static void sharpsl_ac_timer(unsigned long data)
+{
+	int acin = STATUS_AC_IN;
+
+	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+
+	sharpsl_average_clear();
+	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
+		sharpsl_charge_on();
+	else if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_charge_off();
+
+	schedule_work(&sharpsl_bat);
+}
+
+
+static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp)
+{
+	/* Delay the event slightly to debounce */
+	/* Must be a smaller delay than the chrg_full_isr below */
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return IRQ_HANDLED;
+}
+
+static void sharpsl_chrg_full_timer(unsigned long data)
+{
+	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
+
+	sharpsl_pm.full_count++;
+
+	if (STATUS_AC_IN == 0) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
+		if (sharpsl_pm.charge_mode == CHRG_ON)
+			sharpsl_charge_off();
+	} else if (sharpsl_pm.full_count < 2) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
+		schedule_work(&toggle_charger);
+	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
+		schedule_work(&toggle_charger);
+	} else {
+		sharpsl_charge_off();
+		sharpsl_pm.charge_mode = CHRG_DONE;
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
+	}
+}
+
+/* Charging Finished Interrupt (Not present on Corgi) */
+/* Can trigger at the same time as an AC staus change so
+   delay until after that has been processed */
+static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp)
+{
+	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
+		return IRQ_HANDLED;
+
+	/* delay until after any ac interrupt */
+	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp)
+{
+	int is_fatal = 0;
+
+	if (STATUS_BATT_LOCKED == 0) {
+		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL == 0)) {
+		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Maintain an average of the last 10 readings
+ */
+#define SHARPSL_CNV_VALUE_NUM    10
+static int sharpsl_ad_index;
+
+static void sharpsl_average_clear(void)
+{
+	sharpsl_ad_index = 0;
+}
+
+static int sharpsl_average_value(int ad)
+{
+	int i, ad_val = 0;
+	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
+
+	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
+		sharpsl_ad_index = 0;
+		return ad;
+	}
+
+	sharpsl_ad[sharpsl_ad_index] = ad;
+	sharpsl_ad_index++;
+	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
+		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+			sharpsl_ad[i] = sharpsl_ad[i+1];
+		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
+	}
+	for (i=0; i < sharpsl_ad_index; i++)
+		ad_val += sharpsl_ad[i];
+
+	return (ad_val / sharpsl_ad_index);
+}
+
+
+/*
+ * Read MAX1111 ADC
+ */
+static int read_max1111(int channel)
+{
+	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
+			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
+}
+
+static int sharpsl_read_MainBattery(void)
+{
+	return read_max1111(BATT_AD);
+}
+
+static int sharpsl_read_Temp(void)
+{
+	int temp;
+
+	sharpsl_pm.machinfo->measure_temp(1);
+
+	mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+	temp = read_max1111(BATT_THM);
+
+	sharpsl_pm.machinfo->measure_temp(0);
+
+	return temp;
+}
+
+static int sharpsl_read_jkvad(void)
+{
+	return read_max1111(JK_VAD);
+}
+
+/*
+ * Take an array of 5 integers, remove the maximum and minimum values
+ * and return the average.
+ */
+static int get_select_val(int *val)
+{
+	int i, j, k, temp, sum = 0;
+
+	/* Find MAX val */
+	temp = val[0];
+	j=0;
+	for (i=1; i<5; i++) {
+		if (temp < val[i]) {
+			temp = val[i];
+			j = i;
+		}
+	}
+
+	/* Find MIN val */
+	temp = val[4];
+	k=4;
+	for (i=3; i>=0; i--) {
+		if (temp > val[i]) {
+			temp = val[i];
+			k = i;
+		}
+	}
+
+	for (i=0; i<5; i++)
+		if (i != j && i != k )
+			sum += val[i];
+
+	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
+
+	return (sum/3);
+}
+
+/*  mode 0 - Check temperature and voltage
+ *       1 - Check temperature only */
+static int sharpsl_check_battery(int mode)
+{
+	int val, i, buff[5];
+
+	/* Check battery temperature */
+	for (i=0; i<5; i++) {
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+		buff[i] = sharpsl_read_Temp();
+	}
+
+	val = get_select_val(buff);
+
+	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
+	if (val > SHARPSL_CHARGE_ON_TEMP)
+		return -1;
+	if (mode == 1)
+		return 0;
+
+	/* disable charge, enable discharge */
+	CHARGE_OFF();
+	DISCHARGE_ON();
+	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery voltage */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_read_MainBattery();
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	DISCHARGE_OFF();
+
+	val = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
+
+	if (val < SHARPSL_CHARGE_ON_VOLT)
+		return -1;
+
+	return 0;
+}
+
+static int sharpsl_ac_check(void)
+{
+	int temp, i, buff[5];
+
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_read_jkvad();
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD);
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+
+	if ((temp > SHARPSL_CHARGE_ON_JKVAD_HIGH) || (temp < SHARPSL_CHARGE_ON_JKVAD_LOW)) {
+		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_pm_suspend(struct device *dev, pm_message_t state)
+{
+	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
+	flush_scheduled_work();
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+	else
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+
+	return 0;
+}
+
+static int sharpsl_pm_resume(struct device *dev)
+{
+	/* Clear the reset source indicators as they break the bootloader upon reboot */
+	RCSR = 0x0f;
+	sharpsl_average_clear();
+	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
+	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
+
+	return 0;
+}
+
+static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+	/* not charging and AC-IN! */
+
+	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN != 0)) {
+		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
+		sharpsl_pm.charge_mode = CHRG_OFF;
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+		sharpsl_off_charge_battery();
+	}
+
+	sharpsl_pm.machinfo->presuspend();
+
+	PEDR = 0xffffffff; /* clear it */
+
+	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
+	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
+		RTSR &= RTSR_ALE;
+		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
+		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
+	} else if (alarm_enable) {
+		RTSR &= RTSR_ALE;
+		RTAR = alarm_time;
+		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
+	}
+
+	pxa_pm_enter(state);
+
+	sharpsl_pm.machinfo->postsuspend();
+
+	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+}
+
+static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
+	{
+		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
+			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		if(sharpsl_off_charge_battery()) {
+			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
+	}
+
+	if ((STATUS_BATT_LOCKED == 0) || (sharpsl_fatal_check() < 0) )
+	{
+		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
+		corgi_goto_sleep(alarm_time, alarm_enable, state);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int corgi_pxa_pm_enter(suspend_state_t state)
+{
+	unsigned long alarm_time = RTAR;
+	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
+
+	corgi_goto_sleep(alarm_time, alarm_status, state);
+
+	while (corgi_enter_suspend(alarm_time,alarm_status,state))
+		{}
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
+
+	return 0;
+}
+#endif
+
+
+/*
+ * Check for fatal battery errors
+ * Fatal returns -1
+ */
+static int sharpsl_fatal_check(void)
+{
+	int buff[5], temp, i, acin;
+
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
+
+	/* Check AC-Adapter */
+	acin = STATUS_AC_IN;
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		CHARGE_OFF();
+		udelay(100);
+		DISCHARGE_ON();	/* enable discharge */
+		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery : check inserting battery ? */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_read_MainBattery();
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		udelay(100);
+		CHARGE_ON();
+		DISCHARGE_OFF();
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_MainBattery());
+
+	if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) ||
+			(!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT)))
+		return -1;
+	return 0;
+}
+
+static int sharpsl_off_charge_error(void)
+{
+	dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n");
+	CHARGE_OFF();
+	CHARGE_LED_ERR();
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+	return 1;
+}
+
+/*
+ * Charging Control while suspended
+ * Return 1 - go straight to sleep
+ * Return 0 - sleep or wakeup depending on other factors
+ */
+static int sharpsl_off_charge_battery(void)
+{
+	int time;
+
+	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
+
+	if (sharpsl_pm.charge_mode == CHRG_OFF) {
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+		/* AC Check */
+		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery(1) < 0))
+			return sharpsl_off_charge_error();
+
+		/* Start Charging */
+		CHARGE_LED_ON();
+		CHARGE_OFF();
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		CHARGE_ON();
+
+		sharpsl_pm.charge_mode = CHRG_ON;
+		sharpsl_pm.full_count = 0;
+
+		return 1;
+	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
+		return 1;
+	}
+
+	if (sharpsl_pm.full_count == 0) {
+		int time;
+
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
+		if (sharpsl_check_battery(0) < 0)
+			return sharpsl_off_charge_error();
+
+		CHARGE_OFF();
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		CHARGE_ON();
+		sharpsl_pm.charge_mode = CHRG_ON;
+
+		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+		time = RCNR;
+		while(1) {
+			/* Check if any wakeup event had occured */
+			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+				return 0;
+			/* Check for timeout */
+			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
+				return 1;
+			if (STATUS_CHRG_FULL) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n");
+	   			sharpsl_pm.full_count++;
+				CHARGE_OFF();
+				mdelay(SHARPSL_CHARGE_WAIT_TIME);
+				CHARGE_ON();
+				return 1;
+			}
+		}
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
+
+	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+	time = RCNR;
+	while(1) {
+		/* Check if any wakeup event had occured */
+		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+			return 0;
+		/* Check for timeout */
+		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
+			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
+				sharpsl_pm.full_count = 0;
+			}
+			sharpsl_pm.full_count++;
+			return 1;
+		}
+		if (STATUS_CHRG_FULL) {
+			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
+			CHARGE_LED_OFF();
+			CHARGE_OFF();
+			sharpsl_pm.charge_mode = CHRG_DONE;
+			return 1;
+		}
+	}
+}
+
+
+static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+}
+
+static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+}
+
+static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
+static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
+
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+static void sharpsl_apm_get_power_status(struct apm_power_info *info)
+{
+	info->ac_line_status = sharpsl_pm.battstat.ac_status;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		info->battery_status = APM_BATTERY_STATUS_CHARGING;
+	else
+		info->battery_status = sharpsl_pm.battstat.mainbat_status;
+
+	info->battery_flag = (1 << info->battery_status);
+	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
+}
+
+static struct pm_ops sharpsl_pm_ops = {
+	.pm_disk_mode	= PM_DISK_FIRMWARE,
+	.prepare	= pxa_pm_prepare,
+	.enter		= corgi_pxa_pm_enter,
+	.finish		= pxa_pm_finish,
+};
+
+static int __init sharpsl_pm_probe(struct device *dev)
+{
+	if (!dev->platform_data)
+		return -EINVAL;
+
+	sharpsl_pm.dev = dev;
+	sharpsl_pm.machinfo = dev->platform_data;
+	sharpsl_pm.charge_mode = CHRG_OFF;
+	sharpsl_pm.flags = 0;
+
+	sharpsl_pm.machinfo->init();
+
+	init_timer(&sharpsl_pm.ac_timer);
+	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
+
+	init_timer(&sharpsl_pm.chrg_full_timer);
+	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+
+	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
+	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
+	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
+
+	/* Register interrupt handlers */
+	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, SA_INTERRUPT, "AC Input Detect", sharpsl_ac_isr)) {
+		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
+	}
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
+
+	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, SA_INTERRUPT, "Battery Cover", sharpsl_fatal_isr)) {
+		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
+	}
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
+
+	if (sharpsl_pm.machinfo->gpio_fatal) {
+		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, SA_INTERRUPT, "Fatal Battery", sharpsl_fatal_isr)) {
+			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
+		}
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
+	}
+
+	if (!machine_is_corgi())
+	{
+		/* Register interrupt handler. */
+		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) {
+			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
+		}
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
+	}
+
+	device_create_file(dev, &dev_attr_battery_percentage);
+	device_create_file(dev, &dev_attr_battery_voltage);
+
+	apm_get_power_status = sharpsl_apm_get_power_status;
+
+	pm_set_ops(&sharpsl_pm_ops);
+
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return 0;
+}
+
+static int sharpsl_pm_remove(struct device *dev)
+{
+	pm_set_ops(NULL);
+
+	device_remove_file(dev, &dev_attr_battery_percentage);
+	device_remove_file(dev, &dev_attr_battery_voltage);
+
+	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
+	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
+
+	if (sharpsl_pm.machinfo->gpio_fatal)
+		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
+
+	if (!machine_is_corgi())
+		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+
+	del_timer_sync(&sharpsl_pm.chrg_full_timer);
+	del_timer_sync(&sharpsl_pm.ac_timer);
+
+	return 0;
+}
+
+static struct device_driver sharpsl_pm_driver = {
+	.name		= "sharpsl-pm",
+	.bus		= &platform_bus_type,
+	.probe		= sharpsl_pm_probe,
+	.remove		= sharpsl_pm_remove,
+	.suspend	= sharpsl_pm_suspend,
+	.resume		= sharpsl_pm_resume,
+};
+
+static int __devinit sharpsl_pm_init(void)
+{
+	return driver_register(&sharpsl_pm_driver);
+}
+
+static void sharpsl_pm_exit(void)
+{
+ 	driver_unregister(&sharpsl_pm_driver);
+}
+
+late_initcall(sharpsl_pm_init);
+module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 4d826c021315..a68b30eff4d2 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -19,6 +19,8 @@
  *   22nd Aug 2003 Initial version.
  *   20th Dec 2004 Added ssp_config for changing port config without
  *                 closing the port.
+ *    4th Aug 2005 Added option to disable irq handler registration and
+ *                 cleaned up irq and clock detection.
  */
 
 #include <linux/module.h>
@@ -37,6 +39,26 @@
 
 #define PXA_SSP_PORTS 	3
 
+struct ssp_info_ {
+	int irq;
+	u32 clock;
+};
+
+/*
+ * SSP port clock and IRQ settings
+ */
+static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = {
+#if defined (CONFIG_PXA27x)
+	{IRQ_SSP,	CKEN23_SSP1},
+	{IRQ_SSP2,	CKEN3_SSP2},
+	{IRQ_SSP3,	CKEN4_SSP3},
+#else
+	{IRQ_SSP,	CKEN3_SSP},
+	{IRQ_NSSP,	CKEN9_NSSP},
+	{IRQ_ASSP,	CKEN10_ASSP},
+#endif
+};
+
 static DECLARE_MUTEX(sem);
 static int use_count[PXA_SSP_PORTS] = {0, 0, 0};
 
@@ -210,9 +232,9 @@ int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 spee
  *   %-EBUSY	if the resources are already in use
  *   %0		on success
  */
-int ssp_init(struct ssp_dev *dev, u32 port)
+int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
 {
-	int ret, irq;
+	int ret;
 
 	if (port > PXA_SSP_PORTS || port == 0)
 		return -ENODEV;
@@ -229,61 +251,20 @@ int ssp_init(struct ssp_dev *dev, u32 port)
 		up(&sem);
 		return -EBUSY;
 	}
-
-	switch (port) {
-		case 1:
-			irq = IRQ_SSP;
-			break;
-#if defined (CONFIG_PXA27x)
-		case 2:
-			irq = IRQ_SSP2;
-			break;
-		case 3:
-			irq = IRQ_SSP3;
-			break;
-#else
-		case 2:
-			irq = IRQ_NSSP;
-			break;
-		case 3:
-			irq = IRQ_ASSP;
-			break;
-#endif
-		default:
-			return -ENODEV;
-	}
-
 	dev->port = port;
 
-	ret = request_irq(irq, ssp_interrupt, 0, "SSP", dev);
-	if (ret)
-		goto out_region;
+	/* do we need to get irq */
+	if (!(init_flags & SSP_NO_IRQ)) {
+		ret = request_irq(ssp_info[port-1].irq, ssp_interrupt,
+				0, "SSP", dev);
+	    	if (ret)
+			goto out_region;
+	    	dev->irq = ssp_info[port-1].irq;
+	} else
+		dev->irq = 0;
 
 	/* turn on SSP port clock */
-	switch (dev->port) {
-#if defined (CONFIG_PXA27x)
-		case 1:
-			pxa_set_cken(CKEN23_SSP1, 1);
-			break;
-		case 2:
-			pxa_set_cken(CKEN3_SSP2, 1);
-			break;
-		case 3:
-			pxa_set_cken(CKEN4_SSP3, 1);
-			break;
-#else
-		case 1:
-			pxa_set_cken(CKEN3_SSP, 1);
-			break;
-		case 2:
-			pxa_set_cken(CKEN9_NSSP, 1);
-			break;
-		case 3:
-			pxa_set_cken(CKEN10_ASSP, 1);
-			break;
-#endif
-	}
-
+	pxa_set_cken(ssp_info[port-1].clock, 1);
 	up(&sem);
 	return 0;
 
@@ -301,46 +282,17 @@ out_region:
  */
 void ssp_exit(struct ssp_dev *dev)
 {
-	int irq;
-
 	down(&sem);
 	SSCR0_P(dev->port) &= ~SSCR0_SSE;
 
-	/* find irq, save power and turn off SSP port clock */
-	switch (dev->port) {
-#if defined (CONFIG_PXA27x)
-		case 1:
-			irq = IRQ_SSP;
-			pxa_set_cken(CKEN23_SSP1, 0);
-			break;
-		case 2:
-			irq = IRQ_SSP2;
-			pxa_set_cken(CKEN3_SSP2, 0);
-			break;
-		case 3:
-			irq = IRQ_SSP3;
-			pxa_set_cken(CKEN4_SSP3, 0);
-			break;
-#else
-		case 1:
-			irq = IRQ_SSP;
-			pxa_set_cken(CKEN3_SSP, 0);
-			break;
-		case 2:
-			irq = IRQ_NSSP;
-			pxa_set_cken(CKEN9_NSSP, 0);
-			break;
-		case 3:
-			irq = IRQ_ASSP;
-			pxa_set_cken(CKEN10_ASSP, 0);
-			break;
-#endif
-		default:
-			printk(KERN_WARNING "SSP: tried to close invalid port\n");
-			return;
+    	if (dev->port > PXA_SSP_PORTS || dev->port == 0) {
+		printk(KERN_WARNING "SSP: tried to close invalid port\n");
+		return;
 	}
 
-	free_irq(irq, dev);
+	pxa_set_cken(ssp_info[dev->port-1].clock, 0);
+	if (dev->irq)
+		free_irq(dev->irq, dev);
 	release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c);
 	use_count[dev->port - 1]--;
 	up(&sem);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index e3c14d6b4328..e84fdde6edf8 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -102,8 +102,8 @@ config CPU_ARM922T
 # ARM925T
 config CPU_ARM925T
  	bool "Support ARM925T processor" if ARCH_OMAP1
- 	depends on ARCH_OMAP1510
- 	default y if ARCH_OMAP1510
+ 	depends on ARCH_OMAP15XX
+ 	default y if ARCH_OMAP15XX
 	select CPU_32v4
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -242,7 +242,7 @@ config CPU_XSCALE
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor"
-	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB
+	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_CACHE_V6
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 7e144f9cad1c..9ccf1943fc94 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := common.o sram.o sram-fn.o clock.o dma.o mux.o gpio.o mcbsp.o usb.o
+obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o mcbsp.o usb.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index a020fe16428f..7ce39b986e23 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -1,15 +1,20 @@
 /*
  *  linux/arch/arm/plat-omap/clock.c
  *
- *  Copyright (C) 2004 Nokia corporation
+ *  Copyright (C) 2004 - 2005 Nokia corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
+ *  Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/config.h>
 #include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
@@ -18,562 +23,20 @@
 #include <asm/io.h>
 #include <asm/semaphore.h>
 #include <asm/hardware/clock.h>
-#include <asm/arch/board.h>
-#include <asm/arch/usb.h>
 
-#include "clock.h"
-#include "sram.h"
+#include <asm/arch/clock.h>
 
-static LIST_HEAD(clocks);
+LIST_HEAD(clocks);
 static DECLARE_MUTEX(clocks_sem);
-static DEFINE_SPINLOCK(clockfw_lock);
-static void propagate_rate(struct clk *  clk);
-/* UART clock function */
-static int set_uart_rate(struct clk * clk, unsigned long rate);
-/* External clock (MCLK & BCLK) functions */
-static int set_ext_clk_rate(struct clk *  clk, unsigned long rate);
-static long round_ext_clk_rate(struct clk *  clk, unsigned long rate);
-static void init_ext_clk(struct clk *  clk);
-/* MPU virtual clock functions */
-static int select_table_rate(struct clk *  clk, unsigned long rate);
-static long round_to_table_rate(struct clk *  clk, unsigned long rate);
-void clk_setdpll(__u16, __u16);
-
-static struct mpu_rate rate_table[] = {
-	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
-	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
-	 */
-#if defined(CONFIG_OMAP_ARM_216MHZ)
-	{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_195MHZ)
-	{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_192MHZ)
-	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
-	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
-	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
-	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/8/4/4/8/8 */
-	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_182MHZ)
-	{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_168MHZ)
-	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_150MHZ)
-	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_120MHZ)
-	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_96MHZ)
-	{  96000000, 12000000,  96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_60MHZ)
-	{  60000000, 12000000,  60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_30MHZ)
-	{  30000000, 12000000,  60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
-#endif
-	{ 0, 0, 0, 0, 0 },
-};
-
-
-static void ckctl_recalc(struct clk *  clk);
-int __clk_enable(struct clk *clk);
-void __clk_disable(struct clk *clk);
-void __clk_unuse(struct clk *clk);
-int __clk_use(struct clk *clk);
-
-
-static void followparent_recalc(struct clk *  clk)
-{
-	clk->rate = clk->parent->rate;
-}
-
-
-static void watchdog_recalc(struct clk *  clk)
-{
-	clk->rate = clk->parent->rate / 14;
-}
-
-static void uart_recalc(struct clk * clk)
-{
-	unsigned int val = omap_readl(clk->enable_reg);
-	if (val & clk->enable_bit)
-		clk->rate = 48000000;
-	else
-		clk->rate = 12000000;
-}
-
-static struct clk ck_ref = {
-	.name		= "ck_ref",
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  ALWAYS_ENABLED,
-};
-
-static struct clk ck_dpll1 = {
-	.name		= "ck_dpll1",
-	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_PROPAGATES | ALWAYS_ENABLED,
-};
-
-static struct clk ck_dpll1out = {
-	.name		= "ck_dpll1out",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_CKOUT_ARM,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk arm_ck = {
-	.name		= "arm_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED,
-	.rate_offset	= CKCTL_ARMDIV_OFFSET,
-	.recalc		= &ckctl_recalc,
-};
-
-static struct clk armper_ck = {
-	.name		= "armper_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_PERCK,
-	.rate_offset	= CKCTL_PERDIV_OFFSET,
-	.recalc		= &ckctl_recalc,
-};
-
-static struct clk arm_gpio_ck = {
-	.name		= "arm_gpio_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_GPIOCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk armxor_ck = {
-	.name		= "armxor_ck",
-	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_XORPCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk armtim_ck = {
-	.name		= "armtim_ck",
-	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_TIMCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk armwdt_ck = {
-	.name		= "armwdt_ck",
-	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_WDTCK,
-	.recalc		= &watchdog_recalc,
-};
-
-static struct clk arminth_ck16xx = {
-	.name		= "arminth_ck",
-	.parent		= &arm_ck,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-	/* Note: On 16xx the frequency can be divided by 2 by programming
-	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
-	 *
-	 * 1510 version is in TC clocks.
-	 */
-};
-
-static struct clk dsp_ck = {
-	.name		= "dsp_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL,
-	.enable_reg	= ARM_CKCTL,
-	.enable_bit	= EN_DSPCK,
-	.rate_offset	= CKCTL_DSPDIV_OFFSET,
-	.recalc		= &ckctl_recalc,
-};
-
-static struct clk dspmmu_ck = {
-	.name		= "dspmmu_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL | ALWAYS_ENABLED,
-	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
-	.recalc		= &ckctl_recalc,
-};
-
-static struct clk dspper_ck = {
-	.name		= "dspper_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL | DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_PERCK,
-	.rate_offset	= CKCTL_PERDIV_OFFSET,
-	.recalc		= &followparent_recalc,
-	//.recalc		= &ckctl_recalc,
-};
-
-static struct clk dspxor_ck = {
-	.name		= "dspxor_ck",
-	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_XORPCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dsptim_ck = {
-	.name		= "dsptim_ck",
-	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_DSPTIMCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk tc_ck = {
-	.name		= "tc_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 |
-			  RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED,
-	.rate_offset	= CKCTL_TCDIV_OFFSET,
-	.recalc		= &ckctl_recalc,
-};
-
-static struct clk arminth_ck1510 = {
-	.name		= "arminth_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-	/* Note: On 1510 the frequency follows TC_CK
-	 *
-	 * 16xx version is in MPU clocks.
-	 */
-};
-
-static struct clk tipb_ck = {
-	.name		= "tibp_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk l3_ocpi_ck = {
-	.name		= "l3_ocpi_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT3,
-	.enable_bit	= EN_OCPI_CK,
-	.recalc		= &followparent_recalc,
-};
+DEFINE_SPINLOCK(clockfw_lock);
 
-static struct clk tc1_ck = {
-	.name		= "tc1_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT3,
-	.enable_bit	= EN_TC1_CK,
-	.recalc		= &followparent_recalc,
-};
+static struct clk_functions *arch_clock;
 
-static struct clk tc2_ck = {
-	.name		= "tc2_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT3,
-	.enable_bit	= EN_TC2_CK,
-	.recalc		= &followparent_recalc,
-};
+/*-------------------------------------------------------------------------
+ * Standard clock functions defined in asm/hardware/clock.h
+ *-------------------------------------------------------------------------*/
 
-static struct clk dma_ck = {
-	.name		= "dma_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dma_lcdfree_ck = {
-	.name		= "dma_lcdfree_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk api_ck = {
-	.name		= "api_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_APICK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk lb_ck = {
-	.name		= "lb_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_LBCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rhea1_ck = {
-	.name		= "rhea1_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rhea2_ck = {
-	.name		= "rhea2_ck",
-	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk lcd_ck = {
-	.name		= "lcd_ck",
-	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 |
-			  RATE_CKCTL,
-	.enable_reg	= ARM_IDLECT2,
-	.enable_bit	= EN_LCDCK,
-	.rate_offset	= CKCTL_LCDDIV_OFFSET,
-	.recalc		= &ckctl_recalc,
-};
-
-static struct clk uart1_1510 = {
-	.name		= "uart1_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &set_uart_rate,
-	.recalc		= &uart_recalc,
-};
-
-static struct clk uart1_16xx = {
-	.name		= "uart1_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 29,
-};
-
-static struct clk uart2_ck = {
-	.name		= "uart2_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT |
-			  ALWAYS_ENABLED,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &set_uart_rate,
-	.recalc		= &uart_recalc,
-};
-
-static struct clk uart3_1510 = {
-	.name		= "uart3_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &set_uart_rate,
-	.recalc		= &uart_recalc,
-};
-
-static struct clk uart3_16xx = {
-	.name		= "uart3_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 31,
-};
-
-static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
-	.name		= "usb_clko",
-	/* Direct from ULPD, no parent */
-	.rate		= 6000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= ULPD_CLOCK_CTRL,
-	.enable_bit	= USB_MCLK_EN_BIT,
-};
-
-static struct clk usb_hhc_ck1510 = {
-	.name		= "usb_hhc_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
-	.flags		= CLOCK_IN_OMAP1510 |
-			  RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= USB_HOST_HHC_UHOST_EN,
-};
-
-static struct clk usb_hhc_ck16xx = {
-	.name		= "usb_hhc_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
-	.flags		= CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= OTG_BASE + 0x08 /* OTG_SYSCON_2 */,
-	.enable_bit	= 8 /* UHOST_EN */,
-};
-
-static struct clk usb_dc_ck = {
-	.name		= "usb_dc_ck",
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED,
-	.enable_reg	= SOFT_REQ_REG,
-	.enable_bit	= 4,
-};
-
-static struct clk mclk_1510 = {
-	.name		= "mclk",
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
-};
-
-static struct clk mclk_16xx = {
-	.name		= "mclk",
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= COM_CLK_DIV_CTRL_SEL,
-	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
-	.set_rate	= &set_ext_clk_rate,
-	.round_rate	= &round_ext_clk_rate,
-	.init		= &init_ext_clk,
-};
-
-static struct clk bclk_1510 = {
-	.name		= "bclk",
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
-};
-
-static struct clk bclk_16xx = {
-	.name		= "bclk",
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= SWD_CLK_DIV_CTRL_SEL,
-	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
-	.set_rate	= &set_ext_clk_rate,
-	.round_rate	= &round_ext_clk_rate,
-	.init		= &init_ext_clk,
-};
-
-static struct clk mmc1_ck = {
-	.name		= "mmc1_ck",
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck,
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 23,
-};
-
-static struct clk mmc2_ck = {
-	.name		= "mmc2_ck",
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck,
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 20,
-};
-
-static struct clk virtual_ck_mpu = {
-	.name		= "mpu",
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  VIRTUAL_CLOCK | ALWAYS_ENABLED,
-	.parent		= &arm_ck, /* Is smarter alias for */
-	.recalc		= &followparent_recalc,
-	.set_rate	= &select_table_rate,
-	.round_rate	= &round_to_table_rate,
-};
-
-
-static struct clk *  onchip_clks[] = {
-	/* non-ULPD clocks */
-	&ck_ref,
-	&ck_dpll1,
-	/* CK_GEN1 clocks */
-	&ck_dpll1out,
-	&arm_ck,
-	&armper_ck,
-	&arm_gpio_ck,
-	&armxor_ck,
-	&armtim_ck,
-	&armwdt_ck,
-	&arminth_ck1510,  &arminth_ck16xx,
-	/* CK_GEN2 clocks */
-	&dsp_ck,
-	&dspmmu_ck,
-	&dspper_ck,
-	&dspxor_ck,
-	&dsptim_ck,
-	/* CK_GEN3 clocks */
-	&tc_ck,
-	&tipb_ck,
-	&l3_ocpi_ck,
-	&tc1_ck,
-	&tc2_ck,
-	&dma_ck,
-	&dma_lcdfree_ck,
-	&api_ck,
-	&lb_ck,
-	&rhea1_ck,
-	&rhea2_ck,
-	&lcd_ck,
-	/* ULPD clocks */
-	&uart1_1510,
-	&uart1_16xx,
-	&uart2_ck,
-	&uart3_1510,
-	&uart3_16xx,
-	&usb_clko,
-	&usb_hhc_ck1510, &usb_hhc_ck16xx,
-	&usb_dc_ck,
-	&mclk_1510,  &mclk_16xx,
-	&bclk_1510,  &bclk_16xx,
-	&mmc1_ck,
-	&mmc2_ck,
-	/* Virtual clocks */
-	&virtual_ck_mpu,
-};
-
-struct clk *clk_get(struct device *dev, const char *id)
+struct clk * clk_get(struct device *dev, const char *id)
 {
 	struct clk *p, *clk = ERR_PTR(-ENOENT);
 
@@ -590,534 +53,200 @@ struct clk *clk_get(struct device *dev, const char *id)
 }
 EXPORT_SYMBOL(clk_get);
 
-
-void clk_put(struct clk *clk)
-{
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
-
-int __clk_enable(struct clk *clk)
-{
-	__u16 regval16;
-	__u32 regval32;
-
-	if (clk->flags & ALWAYS_ENABLED)
-		return 0;
-
-	if (unlikely(clk->enable_reg == 0)) {
-		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
-		       clk->name);
-		return 0;
-	}
-
-	if (clk->flags & DSP_DOMAIN_CLOCK) {
-		__clk_use(&api_ck);
-	}
-
-	if (clk->flags & ENABLE_REG_32BIT) {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval32 = __raw_readl(clk->enable_reg);
-			regval32 |= (1 << clk->enable_bit);
-			__raw_writel(regval32, clk->enable_reg);
-		} else {
-			regval32 = omap_readl(clk->enable_reg);
-			regval32 |= (1 << clk->enable_bit);
-			omap_writel(regval32, clk->enable_reg);
-		}
-	} else {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval16 = __raw_readw(clk->enable_reg);
-			regval16 |= (1 << clk->enable_bit);
-			__raw_writew(regval16, clk->enable_reg);
-		} else {
-			regval16 = omap_readw(clk->enable_reg);
-			regval16 |= (1 << clk->enable_bit);
-			omap_writew(regval16, clk->enable_reg);
-		}
-	}
-
-	if (clk->flags & DSP_DOMAIN_CLOCK) {
-		__clk_unuse(&api_ck);
-	}
-
-	return 0;
-}
-
-
-void __clk_disable(struct clk *clk)
-{
-	__u16 regval16;
-	__u32 regval32;
-
-	if (clk->enable_reg == 0)
-		return;
-
-	if (clk->flags & DSP_DOMAIN_CLOCK) {
-		__clk_use(&api_ck);
-	}
-
-	if (clk->flags & ENABLE_REG_32BIT) {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval32 = __raw_readl(clk->enable_reg);
-			regval32 &= ~(1 << clk->enable_bit);
-			__raw_writel(regval32, clk->enable_reg);
-		} else {
-			regval32 = omap_readl(clk->enable_reg);
-			regval32 &= ~(1 << clk->enable_bit);
-			omap_writel(regval32, clk->enable_reg);
-		}
-	} else {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval16 = __raw_readw(clk->enable_reg);
-			regval16 &= ~(1 << clk->enable_bit);
-			__raw_writew(regval16, clk->enable_reg);
-		} else {
-			regval16 = omap_readw(clk->enable_reg);
-			regval16 &= ~(1 << clk->enable_bit);
-			omap_writew(regval16, clk->enable_reg);
-		}
-	}
-
-	if (clk->flags & DSP_DOMAIN_CLOCK) {
-		__clk_unuse(&api_ck);
-	}
-}
-
-
-void __clk_unuse(struct clk *clk)
-{
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		__clk_disable(clk);
-		if (likely(clk->parent))
-			__clk_unuse(clk->parent);
-	}
-}
-
-
-int __clk_use(struct clk *clk)
-{
-	int ret = 0;
-	if (clk->usecount++ == 0) {
-		if (likely(clk->parent))
-			ret = __clk_use(clk->parent);
-
-		if (unlikely(ret != 0)) {
-			clk->usecount--;
-			return ret;
-		}
-
-		ret = __clk_enable(clk);
-
-		if (unlikely(ret != 0) && clk->parent) {
-			__clk_unuse(clk->parent);
-			clk->usecount--;
-		}
-	}
-
-	return ret;
-}
-
-
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
-	int ret;
+	int ret = 0;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = __clk_enable(clk);
+	if (clk->enable)
+		ret = clk->enable(clk);
+	else if (arch_clock->clk_enable)
+		ret = arch_clock->clk_enable(clk);
+	else
+		printk(KERN_ERR "Could not enable clock %s\n", clk->name);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
+
 	return ret;
 }
 EXPORT_SYMBOL(clk_enable);
 
-
 void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	__clk_disable(clk);
+	if (clk->disable)
+		clk->disable(clk);
+	else if (arch_clock->clk_disable)
+		arch_clock->clk_disable(clk);
+	else
+		printk(KERN_ERR "Could not disable clock %s\n", clk->name);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
-
 int clk_use(struct clk *clk)
 {
 	unsigned long flags;
 	int ret = 0;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = __clk_use(clk);
+	if (arch_clock->clk_use)
+		ret = arch_clock->clk_use(clk);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
+
 	return ret;
 }
 EXPORT_SYMBOL(clk_use);
 
-
 void clk_unuse(struct clk *clk)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	__clk_unuse(clk);
+	if (arch_clock->clk_unuse)
+		arch_clock->clk_unuse(clk);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
 EXPORT_SYMBOL(clk_unuse);
 
-
 int clk_get_usecount(struct clk *clk)
 {
-        return clk->usecount;
-}
-EXPORT_SYMBOL(clk_get_usecount);
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-
-static __u16 verify_ckctl_value(__u16 newval)
-{
-	/* This function checks for following limitations set
-	 * by the hardware (all conditions must be true):
-	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
-	 * ARM_CK >= TC_CK
-	 * DSP_CK >= TC_CK
-	 * DSPMMU_CK >= TC_CK
-	 *
-	 * In addition following rules are enforced:
-	 * LCD_CK <= TC_CK
-	 * ARMPER_CK <= TC_CK
-	 *
-	 * However, maximum frequencies are not checked for!
-	 */
-	__u8 per_exp;
-	__u8 lcd_exp;
-	__u8 arm_exp;
-	__u8 dsp_exp;
-	__u8 tc_exp;
-	__u8 dspmmu_exp;
-
-	per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3;
-	lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3;
-	arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3;
-	dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3;
-	tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3;
-	dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3;
-
-	if (dspmmu_exp < dsp_exp)
-		dspmmu_exp = dsp_exp;
-	if (dspmmu_exp > dsp_exp+1)
-		dspmmu_exp = dsp_exp+1;
-	if (tc_exp < arm_exp)
-		tc_exp = arm_exp;
-	if (tc_exp < dspmmu_exp)
-		tc_exp = dspmmu_exp;
-	if (tc_exp > lcd_exp)
-		lcd_exp = tc_exp;
-	if (tc_exp > per_exp)
-		per_exp = tc_exp;
+	unsigned long flags;
+	int ret = 0;
 
-	newval &= 0xf000;
-	newval |= per_exp << CKCTL_PERDIV_OFFSET;
-	newval |= lcd_exp << CKCTL_LCDDIV_OFFSET;
-	newval |= arm_exp << CKCTL_ARMDIV_OFFSET;
-	newval |= dsp_exp << CKCTL_DSPDIV_OFFSET;
-	newval |= tc_exp << CKCTL_TCDIV_OFFSET;
-	newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET;
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = clk->usecount;
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
-	return newval;
+	return ret;
 }
+EXPORT_SYMBOL(clk_get_usecount);
 
-
-static int calc_dsor_exp(struct clk *clk, unsigned long rate)
+unsigned long clk_get_rate(struct clk *clk)
 {
-	/* Note: If target frequency is too low, this function will return 4,
-	 * which is invalid value. Caller must check for this value and act
-	 * accordingly.
-	 *
-	 * Note: This function does not check for following limitations set
-	 * by the hardware (all conditions must be true):
-	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
-	 * ARM_CK >= TC_CK
-	 * DSP_CK >= TC_CK
-	 * DSPMMU_CK >= TC_CK
-	 */
-	unsigned long realrate;
-	struct clk *  parent;
-	unsigned  dsor_exp;
-
-	if (unlikely(!(clk->flags & RATE_CKCTL)))
-		return -EINVAL;
-
-	parent = clk->parent;
-	if (unlikely(parent == 0))
-		return -EIO;
-
-	realrate = parent->rate;
-	for (dsor_exp=0; dsor_exp<4; dsor_exp++) {
-		if (realrate <= rate)
-			break;
+	unsigned long flags;
+	unsigned long ret = 0;
 
-		realrate /= 2;
-	}
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = clk->rate;
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
-	return dsor_exp;
+	return ret;
 }
+EXPORT_SYMBOL(clk_get_rate);
 
-
-static void ckctl_recalc(struct clk *  clk)
+void clk_put(struct clk *clk)
 {
-	int dsor;
-
-	/* Calculate divisor encoded as 2-bit exponent */
-	if (clk->flags & DSP_DOMAIN_CLOCK) {
-		/* The clock control bits are in DSP domain,
-		 * so api_ck is needed for access.
-		 * Note that DSP_CKCTL virt addr = phys addr, so
-		 * we must use __raw_readw() instead of omap_readw().
-		 */
-		__clk_use(&api_ck);
-		dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
-		__clk_unuse(&api_ck);
-	} else {
-		dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
-	}
-	if (unlikely(clk->rate == clk->parent->rate / dsor))
-		return; /* No change, quick exit */
-	clk->rate = clk->parent->rate / dsor;
-
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
+	if (clk && !IS_ERR(clk))
+		module_put(clk->owner);
 }
+EXPORT_SYMBOL(clk_put);
 
+/*-------------------------------------------------------------------------
+ * Optional clock functions defined in asm/hardware/clock.h
+ *-------------------------------------------------------------------------*/
 
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	int dsor_exp;
-
-	if (clk->flags & RATE_FIXED)
-		return clk->rate;
-
-	if (clk->flags & RATE_CKCTL) {
-		dsor_exp = calc_dsor_exp(clk, rate);
-		if (dsor_exp < 0)
-			return dsor_exp;
-		if (dsor_exp > 3)
-			dsor_exp = 3;
-		return clk->parent->rate / (1 << dsor_exp);
-	}
+	unsigned long flags;
+	long ret = 0;
 
-	if(clk->round_rate != 0)
-		return clk->round_rate(clk, rate);
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_round_rate)
+		ret = arch_clock->clk_round_rate(clk, rate);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
-	return clk->rate;
+	return ret;
 }
 EXPORT_SYMBOL(clk_round_rate);
 
-
-static void propagate_rate(struct clk *  clk)
-{
-	struct clk **  clkp;
-
-	for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
-		if (likely((*clkp)->parent != clk)) continue;
-		if (likely((*clkp)->recalc))
-			(*clkp)->recalc(*clkp);
-	}
-}
-
-
-static int select_table_rate(struct clk *  clk, unsigned long rate)
+int clk_set_rate(struct clk *clk, unsigned long rate)
 {
-	/* Find the highest supported frequency <= rate and switch to it */
-	struct mpu_rate *  ptr;
-
-	if (clk != &virtual_ck_mpu)
-		return -EINVAL;
-
-	for (ptr = rate_table; ptr->rate; ptr++) {
-		if (ptr->xtal != ck_ref.rate)
-			continue;
-
-		/* DPLL1 cannot be reprogrammed without risking system crash */
-		if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate)
-			continue;
-
-		/* Can check only after xtal frequency check */
-		if (ptr->rate <= rate)
-			break;
-	}
-
-	if (!ptr->rate)
-		return -EINVAL;
+	unsigned long flags;
+	int ret = 0;
 
-	/*
-	 * In most cases we should not need to reprogram DPLL.
-	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
-	 */
-	omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_set_rate)
+		ret = arch_clock->clk_set_rate(clk, rate);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
-	ck_dpll1.rate = ptr->pll_rate;
-	propagate_rate(&ck_dpll1);
-	return 0;
+	return ret;
 }
+EXPORT_SYMBOL(clk_set_rate);
 
-
-static long round_to_table_rate(struct clk *  clk, unsigned long rate)
+int clk_set_parent(struct clk *clk, struct clk *parent)
 {
-	/* Find the highest supported frequency <= rate */
-	struct mpu_rate *  ptr;
-	long  highest_rate;
-
-	if (clk != &virtual_ck_mpu)
-		return -EINVAL;
-
-	highest_rate = -EINVAL;
-
-	for (ptr = rate_table; ptr->rate; ptr++) {
-		if (ptr->xtal != ck_ref.rate)
-			continue;
-
-		highest_rate = ptr->rate;
+	unsigned long flags;
+	int ret = 0;
 
-		/* Can check only after xtal frequency check */
-		if (ptr->rate <= rate)
-			break;
-	}
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_set_parent)
+		ret =  arch_clock->clk_set_parent(clk, parent);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
-	return highest_rate;
+	return ret;
 }
+EXPORT_SYMBOL(clk_set_parent);
 
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
+struct clk *clk_get_parent(struct clk *clk)
 {
-	int  ret = -EINVAL;
-	int  dsor_exp;
-	__u16  regval;
-	unsigned long  flags;
-
-	if (clk->flags & RATE_CKCTL) {
-		dsor_exp = calc_dsor_exp(clk, rate);
-		if (dsor_exp > 3)
-			dsor_exp = -EINVAL;
-		if (dsor_exp < 0)
-			return dsor_exp;
-
-		spin_lock_irqsave(&clockfw_lock, flags);
-		regval = omap_readw(ARM_CKCTL);
-		regval &= ~(3 << clk->rate_offset);
-		regval |= dsor_exp << clk->rate_offset;
-		regval = verify_ckctl_value(regval);
-		omap_writew(regval, ARM_CKCTL);
-		clk->rate = clk->parent->rate / (1 << dsor_exp);
-		spin_unlock_irqrestore(&clockfw_lock, flags);
-		ret = 0;
-	} else if(clk->set_rate != 0) {
-		spin_lock_irqsave(&clockfw_lock, flags);
-		ret = clk->set_rate(clk, rate);
-		spin_unlock_irqrestore(&clockfw_lock, flags);
-	}
+	unsigned long flags;
+	struct clk * ret = NULL;
 
-	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
-		propagate_rate(clk);
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_get_parent)
+		ret = arch_clock->clk_get_parent(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return ret;
 }
-EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
 
+/*-------------------------------------------------------------------------
+ * OMAP specific clock functions shared between omap1 and omap2
+ *-------------------------------------------------------------------------*/
 
-static unsigned calc_ext_dsor(unsigned long rate)
-{
-	unsigned dsor;
+unsigned int __initdata mpurate;
 
-	/* MCLK and BCLK divisor selection is not linear:
-	 * freq = 96MHz / dsor
-	 *
-	 * RATIO_SEL range: dsor <-> RATIO_SEL
-	 * 0..6: (RATIO_SEL+2) <-> (dsor-2)
-	 * 6..48:  (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6)
-	 * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9
-	 * can not be used.
-	 */
-	for (dsor = 2; dsor < 96; ++dsor) {
-		if ((dsor & 1) && dsor > 8)
-		  	continue;
-		if (rate >= 96000000 / dsor)
-			break;
-	}
-	return dsor;
-}
-
-/* Only needed on 1510 */
-static int set_uart_rate(struct clk * clk, unsigned long rate)
-{
-	unsigned int val;
-
-	val = omap_readl(clk->enable_reg);
-	if (rate == 12000000)
-		val &= ~(1 << clk->enable_bit);
-	else if (rate == 48000000)
-		val |= (1 << clk->enable_bit);
-	else
-		return -EINVAL;
-	omap_writel(val, clk->enable_reg);
-	clk->rate = rate;
-
-	return 0;
-}
-
-static int set_ext_clk_rate(struct clk *  clk, unsigned long rate)
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
 {
-	unsigned dsor;
-	__u16 ratio_bits;
+	get_option(&str, &mpurate);
 
-	dsor = calc_ext_dsor(rate);
-	clk->rate = 96000000 / dsor;
-	if (dsor > 8)
-		ratio_bits = ((dsor - 8) / 2 + 6) << 2;
-	else
-		ratio_bits = (dsor - 2) << 2;
+	if (!mpurate)
+		return 1;
 
-	ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd;
-	omap_writew(ratio_bits, clk->enable_reg);
+	if (mpurate < 1000)
+		mpurate *= 1000000;
 
-	return 0;
+	return 1;
 }
+__setup("mpurate=", omap_clk_setup);
 
-
-static long round_ext_clk_rate(struct clk *  clk, unsigned long rate)
+/* Used for clocks that always have same value as the parent clock */
+void followparent_recalc(struct clk *clk)
 {
-	return 96000000 / calc_ext_dsor(rate);
+	clk->rate = clk->parent->rate;
 }
 
-
-static void init_ext_clk(struct clk *  clk)
+/* Propagate rate to children */
+void propagate_rate(struct clk * tclk)
 {
-	unsigned dsor;
-	__u16 ratio_bits;
+	struct clk *clkp;
 
-	/* Determine current rate and ensure clock is based on 96MHz APLL */
-	ratio_bits = omap_readw(clk->enable_reg) & ~1;
-	omap_writew(ratio_bits, clk->enable_reg);
-
-	ratio_bits = (ratio_bits & 0xfc) >> 2;
-	if (ratio_bits > 6)
-		dsor = (ratio_bits - 6) * 2 + 8;
-	else
-		dsor = ratio_bits + 2;
-
-	clk-> rate = 96000000 / dsor;
+	list_for_each_entry(clkp, &clocks, node) {
+		if (likely(clkp->parent != tclk))
+			continue;
+		if (likely((u32)clkp->recalc))
+			clkp->recalc(clkp);
+	}
 }
 
-
 int clk_register(struct clk *clk)
 {
 	down(&clocks_sem);
@@ -1125,6 +254,7 @@ int clk_register(struct clk *clk)
 	if (clk->init)
 		clk->init(clk);
 	up(&clocks_sem);
+
 	return 0;
 }
 EXPORT_SYMBOL(clk_register);
@@ -1137,203 +267,38 @@ void clk_unregister(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_unregister);
 
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Resets some clocks that may be left on from bootloader,
- * but leaves serial clocks on. See also omap_late_clk_reset().
- */
-static inline void omap_early_clk_reset(void)
+void clk_deny_idle(struct clk *clk)
 {
-	//omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_deny_idle)
+		arch_clock->clk_deny_idle(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
-#else
-#define omap_early_clk_reset()	{}
-#endif
+EXPORT_SYMBOL(clk_deny_idle);
 
-int __init clk_init(void)
+void clk_allow_idle(struct clk *clk)
 {
-	struct clk **  clkp;
-	const struct omap_clock_config *info;
-	int crystal_type = 0; /* Default 12 MHz */
-
-	omap_early_clk_reset();
-
-	for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
-		if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) {
-			clk_register(*clkp);
-			continue;
-		}
-
-		if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) {
-			clk_register(*clkp);
-			continue;
-		}
-
-		if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) {
-			clk_register(*clkp);
-			continue;
-		}
-	}
-
-	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
-	if (info != NULL) {
-		if (!cpu_is_omap1510())
-			crystal_type = info->system_clock_type;
-	}
-
-#if defined(CONFIG_ARCH_OMAP730)
-	ck_ref.rate = 13000000;
-#elif defined(CONFIG_ARCH_OMAP16XX)
-	if (crystal_type == 2)
-		ck_ref.rate = 19200000;
-#endif
-
-	printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
-	       omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
-	       omap_readw(ARM_CKCTL));
-
-	/* We want to be in syncronous scalable mode */
-	omap_writew(0x1000, ARM_SYSST);
-
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
-	/* Use values set by bootloader. Determine PLL rate and recalculate
-	 * dependent clocks as if kernel had changed PLL or divisors.
-	 */
-	{
-		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
-
-		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
-		if (pll_ctl_val & 0x10) {
-			/* PLL enabled, apply multiplier and divisor */
-			if (pll_ctl_val & 0xf80)
-				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
-			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
-		} else {
-			/* PLL disabled, apply bypass divisor */
-			switch (pll_ctl_val & 0xc) {
-			case 0:
-				break;
-			case 0x4:
-				ck_dpll1.rate /= 2;
-				break;
-			default:
-				ck_dpll1.rate /= 4;
-				break;
-			}
-		}
-	}
-	propagate_rate(&ck_dpll1);
-#else
-	/* Find the highest supported frequency and enable it */
-	if (select_table_rate(&virtual_ck_mpu, ~0)) {
-		printk(KERN_ERR "System frequencies not set. Check your config.\n");
-		/* Guess sane values (60MHz) */
-		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(0x1005, ARM_CKCTL);
-		ck_dpll1.rate = 60000000;
-		propagate_rate(&ck_dpll1);
-	}
-#endif
-	/* Cache rates for clocks connected to ck_ref (not dpll1) */
-	propagate_rate(&ck_ref);
-	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
-		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-	/* Select slicer output as OMAP input clock */
-	omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
-#endif
-
-	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
-	omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
-
-	/* Put DSP/MPUI into reset until needed */
-	omap_writew(0, ARM_RSTCT1);
-	omap_writew(1, ARM_RSTCT2);
-	omap_writew(0x400, ARM_IDLECT1);
-
-	/*
-	 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
-	 * of the ARM_IDLECT2 register must be set to zero. The power-on
-	 * default value of this bit is one.
-	 */
-	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_use(&armper_ck);
-	clk_use(&armxor_ck);
-	clk_use(&armtim_ck);
-
-	if (cpu_is_omap1510())
-		clk_enable(&arm_gpio_ck);
+	unsigned long flags;
 
-	return 0;
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_allow_idle)
+		arch_clock->clk_allow_idle(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
+EXPORT_SYMBOL(clk_allow_idle);
 
+/*-------------------------------------------------------------------------*/
 
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-
-static int __init omap_late_clk_reset(void)
+int __init clk_init(struct clk_functions * custom_clocks)
 {
-	/* Turn off all unused clocks */
-	struct clk *p;
-	__u32 regval32;
-
-	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
-	regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4);
-	omap_writew(regval32, SOFT_REQ_REG);
-	omap_writew(0, SOFT_REQ_REG2);
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) ||
-			p->enable_reg == 0)
-			continue;
-
-		/* Assume no DSP clocks have been activated by bootloader */
-		if (p->flags & DSP_DOMAIN_CLOCK)
-			continue;
-
-		/* Is the clock already disabled? */
-		if (p->flags & ENABLE_REG_32BIT) {
-			if (p->flags & VIRTUAL_IO_ADDRESS)
-				regval32 = __raw_readl(p->enable_reg);
-			else
-				regval32 = omap_readl(p->enable_reg);
-		} else {
-			if (p->flags & VIRTUAL_IO_ADDRESS)
-				regval32 = __raw_readw(p->enable_reg);
-			else
-				regval32 = omap_readw(p->enable_reg);
-		}
-
-		if ((regval32 & (1 << p->enable_bit)) == 0)
-			continue;
-
-		/* FIXME: This clock seems to be necessary but no-one
-		 * has asked for its activation. */
-		if (p == &tc2_ck         // FIX: pm.c (SRAM), CCP, Camera
-		    || p == &ck_dpll1out // FIX: SoSSI, SSR
-		    || p == &arm_gpio_ck // FIX: GPIO code for 1510
-		    ) {
-			printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
-			       p->name);
-			continue;
-		}
-
-		printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name);
-		__clk_disable(p);
-		printk(" done\n");
+	if (!custom_clocks) {
+		printk(KERN_ERR "No custom clock functions registered\n");
+		BUG();
 	}
 
+	arch_clock = custom_clocks;
+
 	return 0;
 }
-
-late_initcall(omap_late_clk_reset);
-
-#endif
diff --git a/arch/arm/plat-omap/clock.h b/arch/arm/plat-omap/clock.h
deleted file mode 100644
index a89e1e8c2519..000000000000
--- a/arch/arm/plat-omap/clock.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *  linux/arch/arm/plat-omap/clock.h
- *
- *  Copyright (C) 2004 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-struct module;
-
-struct clk {
-	struct list_head	node;
-	struct module		*owner;
-	const char		*name;
-	struct clk		*parent;
-	unsigned long		rate;
-	__s8			usecount;
-	__u16			flags;
-	__u32			enable_reg;
-	__u8			enable_bit;
-	__u8			rate_offset;
-	void			(*recalc)(struct clk *);
-	int			(*set_rate)(struct clk *, unsigned long);
-	long			(*round_rate)(struct clk *, unsigned long);
-	void			(*init)(struct clk *);
-};
-
-
-struct mpu_rate {
-	unsigned long		rate;
-	unsigned long		xtal;
-	unsigned long		pll_rate;
-	__u16			ckctl_val;
-	__u16			dpllctl_val;
-};
-
-
-/* Clock flags */
-#define RATE_CKCTL		1
-#define RATE_FIXED		2
-#define RATE_PROPAGATES		4
-#define VIRTUAL_CLOCK		8
-#define ALWAYS_ENABLED		16
-#define ENABLE_REG_32BIT	32
-#define CLOCK_IN_OMAP16XX	64
-#define CLOCK_IN_OMAP1510	128
-#define CLOCK_IN_OMAP730	256
-#define DSP_DOMAIN_CLOCK	512
-#define VIRTUAL_IO_ADDRESS	1024
-
-/* ARM_CKCTL bit shifts */
-#define CKCTL_PERDIV_OFFSET	0
-#define CKCTL_LCDDIV_OFFSET	2
-#define CKCTL_ARMDIV_OFFSET	4
-#define CKCTL_DSPDIV_OFFSET	6
-#define CKCTL_TCDIV_OFFSET	8
-#define CKCTL_DSPMMUDIV_OFFSET	10
-/*#define ARM_TIMXO		12*/
-#define EN_DSPCK		13
-/*#define ARM_INTHCK_SEL	14*/ /* Divide-by-2 for mpu inth_ck */
-/* DSP_CKCTL bit shifts */
-#define CKCTL_DSPPERDIV_OFFSET	0
-
-/* ARM_IDLECT1 bit shifts */
-/*#define IDLWDT_ARM	0*/
-/*#define IDLXORP_ARM	1*/
-/*#define IDLPER_ARM	2*/
-/*#define IDLLCD_ARM	3*/
-/*#define IDLLB_ARM	4*/
-/*#define IDLHSAB_ARM	5*/
-/*#define IDLIF_ARM	6*/
-/*#define IDLDPLL_ARM	7*/
-/*#define IDLAPI_ARM	8*/
-/*#define IDLTIM_ARM	9*/
-/*#define SETARM_IDLE	11*/
-
-/* ARM_IDLECT2 bit shifts */
-#define EN_WDTCK	0
-#define EN_XORPCK	1
-#define EN_PERCK	2
-#define EN_LCDCK	3
-#define EN_LBCK		4 /* Not on 1610/1710 */
-/*#define EN_HSABCK	5*/
-#define EN_APICK	6
-#define EN_TIMCK	7
-#define DMACK_REQ	8
-#define EN_GPIOCK	9 /* Not on 1610/1710 */
-/*#define EN_LBFREECK	10*/
-#define EN_CKOUT_ARM	11
-
-/* ARM_IDLECT3 bit shifts */
-#define EN_OCPI_CK	0
-#define EN_TC1_CK	2
-#define EN_TC2_CK	4
-
-/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
-#define EN_DSPTIMCK	5
-
-/* Various register defines for clock controls scattered around OMAP chip */
-#define USB_MCLK_EN_BIT		4	/* In ULPD_CLKC_CTRL */
-#define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */
-#define SWD_ULPD_PLL_CLK_REQ	1	/* In SWD_CLK_DIV_CTRL_SEL */
-#define COM_ULPD_PLL_CLK_REQ	1	/* In COM_CLK_DIV_CTRL_SEL */
-#define SWD_CLK_DIV_CTRL_SEL	0xfffe0874
-#define COM_CLK_DIV_CTRL_SEL	0xfffe0878
-#define SOFT_REQ_REG		0xfffe0834
-#define SOFT_REQ_REG2		0xfffe0880
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-int clk_init(void);
-
-#endif
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 02bcc6c1cd1b..ccdb452630cf 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -31,7 +31,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
 
-#include "clock.h"
+#include <asm/arch/clock.h>
 
 #define NO_LENGTH_CHECK 0xffffffff
 
@@ -117,19 +117,43 @@ EXPORT_SYMBOL(omap_get_var_config);
 
 static int __init omap_add_serial_console(void)
 {
-	const struct omap_serial_console_config *info;
-
-	info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
-			       struct omap_serial_console_config);
-	if (info != NULL && info->console_uart) {
-		static char speed[11], *opt = NULL;
+	const struct omap_serial_console_config *con_info;
+	const struct omap_uart_config *uart_info;
+	static char speed[11], *opt = NULL;
+	int line, i, uart_idx;
+
+	uart_info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
+	con_info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
+					struct omap_serial_console_config);
+	if (uart_info == NULL || con_info == NULL)
+		return 0;
+
+	if (con_info->console_uart == 0)
+		return 0;
+
+	if (con_info->console_speed) {
+		snprintf(speed, sizeof(speed), "%u", con_info->console_speed);
+		opt = speed;
+	}
 
-		if (info->console_speed) {
-			snprintf(speed, sizeof(speed), "%u", info->console_speed);
-			opt = speed;
-		}
-		return add_preferred_console("ttyS", info->console_uart - 1, opt);
+	uart_idx = con_info->console_uart - 1;
+	if (uart_idx >= OMAP_MAX_NR_PORTS) {
+		printk(KERN_INFO "Console: external UART#%d. "
+			"Not adding it as console this time.\n",
+			uart_idx + 1);
+		return 0;
+	}
+	if (!(uart_info->enabled_uarts & (1 << uart_idx))) {
+		printk(KERN_ERR "Console: Selected UART#%d is "
+			"not enabled for this platform\n",
+			uart_idx + 1);
+		return -1;
+	}
+	line = 0;
+	for (i = 0; i < uart_idx; i++) {
+		if (uart_info->enabled_uarts & (1 << i))
+			line++;
 	}
-	return 0;
+	return add_preferred_console("ttyS", line, opt);
 }
 console_initcall(omap_add_serial_console);
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
new file mode 100644
index 000000000000..9dcce904b608
--- /dev/null
+++ b/arch/arm/plat-omap/devices.c
@@ -0,0 +1,381 @@
+/*
+ * linux/arch/arm/plat-omap/devices.c
+ *
+ * Common platform device setup/initialization for OMAP1 and OMAP2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/gpio.h>
+
+
+void omap_nop_release(struct device *dev)
+{
+        /* Nothing */
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if 	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+
+#define	OMAP1_I2C_BASE		0xfffb3800
+#define OMAP2_I2C_BASE1		0x48070000
+#define OMAP_I2C_SIZE		0x3f
+#define OMAP1_I2C_INT		INT_I2C
+#define OMAP2_I2C_INT1		56
+
+static struct resource i2c_resources1[] = {
+	{
+		.start		= 0,
+		.end		= 0,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+/* DMA not used; works around erratum writing to non-empty i2c fifo */
+
+static struct platform_device omap_i2c_device1 = {
+        .name           = "i2c_omap",
+        .id             = 1,
+        .dev = {
+                .release        = omap_nop_release,
+        },
+	.num_resources	= ARRAY_SIZE(i2c_resources1),
+	.resource	= i2c_resources1,
+};
+
+/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */
+static void omap_init_i2c(void)
+{
+	if (cpu_is_omap24xx()) {
+		i2c_resources1[0].start = OMAP2_I2C_BASE1;
+		i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE;
+		i2c_resources1[1].start = OMAP2_I2C_INT1;
+	} else {
+		i2c_resources1[0].start = OMAP1_I2C_BASE;
+		i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE;
+		i2c_resources1[1].start = OMAP1_I2C_INT;
+	}
+
+	/* FIXME define and use a boot tag, in case of boards that
+	 * either don't wire up I2C, or chips that mux it differently...
+	 * it can include clocking and address info, maybe more.
+	 */
+	if (cpu_is_omap24xx()) {
+		omap_cfg_reg(M19_24XX_I2C1_SCL);
+		omap_cfg_reg(L15_24XX_I2C1_SDA);
+	} else {
+		omap_cfg_reg(I2C_SCL);
+		omap_cfg_reg(I2C_SDA);
+	}
+
+	(void) platform_device_register(&omap_i2c_device1);
+}
+
+#else
+static inline void omap_init_i2c(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define	OMAP_MMC1_BASE		0x4809c000
+#define OMAP_MMC1_INT		83
+#else
+#define	OMAP_MMC1_BASE		0xfffb7800
+#define OMAP_MMC1_INT		INT_MMC
+#endif
+#define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+
+static struct omap_mmc_conf mmc1_conf;
+
+static u64 mmc1_dmamask = 0xffffffff;
+
+static struct resource mmc1_resources[] = {
+	{
+		.start		= IO_ADDRESS(OMAP_MMC1_BASE),
+		.end		= IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP_MMC1_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mmc_omap_device1 = {
+	.name		= "mmci-omap",
+	.id		= 1,
+	.dev = {
+		.release	= omap_nop_release,
+		.dma_mask	= &mmc1_dmamask,
+		.platform_data	= &mmc1_conf,
+	},
+	.num_resources	= ARRAY_SIZE(mmc1_resources),
+	.resource	= mmc1_resources,
+};
+
+#ifdef	CONFIG_ARCH_OMAP16XX
+
+static struct omap_mmc_conf mmc2_conf;
+
+static u64 mmc2_dmamask = 0xffffffff;
+
+static struct resource mmc2_resources[] = {
+	{
+		.start		= IO_ADDRESS(OMAP_MMC2_BASE),
+		.end		= IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_1610_MMC2,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mmc_omap_device2 = {
+	.name		= "mmci-omap",
+	.id		= 2,
+	.dev = {
+		.release	= omap_nop_release,
+		.dma_mask	= &mmc2_dmamask,
+		.platform_data	= &mmc2_conf,
+	},
+	.num_resources	= ARRAY_SIZE(mmc2_resources),
+	.resource	= mmc2_resources,
+};
+#endif
+
+static void __init omap_init_mmc(void)
+{
+	const struct omap_mmc_config	*mmc_conf;
+	const struct omap_mmc_conf	*mmc;
+
+	/* NOTE:  assumes MMC was never (wrongly) enabled */
+	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+	if (!mmc_conf)
+		return;
+
+	/* block 1 is always available and has just one pinout option */
+	mmc = &mmc_conf->mmc[0];
+	if (mmc->enabled) {
+		if (!cpu_is_omap24xx()) {
+			omap_cfg_reg(MMC_CMD);
+			omap_cfg_reg(MMC_CLK);
+			omap_cfg_reg(MMC_DAT0);
+			if (cpu_is_omap1710()) {
+				omap_cfg_reg(M15_1710_MMC_CLKI);
+				omap_cfg_reg(P19_1710_MMC_CMDDIR);
+				omap_cfg_reg(P20_1710_MMC_DATDIR0);
+			}
+		}
+		if (mmc->wire4) {
+			if (!cpu_is_omap24xx()) {
+				omap_cfg_reg(MMC_DAT1);
+				/* NOTE:  DAT2 can be on W10 (here) or M15 */
+				if (!mmc->nomux)
+					omap_cfg_reg(MMC_DAT2);
+				omap_cfg_reg(MMC_DAT3);
+			}
+		}
+		mmc1_conf = *mmc;
+		(void) platform_device_register(&mmc_omap_device1);
+	}
+
+#ifdef	CONFIG_ARCH_OMAP16XX
+	/* block 2 is on newer chips, and has many pinout options */
+	mmc = &mmc_conf->mmc[1];
+	if (mmc->enabled) {
+		if (!mmc->nomux) {
+			omap_cfg_reg(Y8_1610_MMC2_CMD);
+			omap_cfg_reg(Y10_1610_MMC2_CLK);
+			omap_cfg_reg(R18_1610_MMC2_CLKIN);
+			omap_cfg_reg(W8_1610_MMC2_DAT0);
+			if (mmc->wire4) {
+				omap_cfg_reg(V8_1610_MMC2_DAT1);
+				omap_cfg_reg(W15_1610_MMC2_DAT2);
+				omap_cfg_reg(R10_1610_MMC2_DAT3);
+			}
+
+			/* These are needed for the level shifter */
+			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
+			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
+			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
+		}
+
+		/* Feedback clock must be set on OMAP-1710 MMC2 */
+		if (cpu_is_omap1710())
+			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
+				     MOD_CONF_CTRL_1);
+		mmc2_conf = *mmc;
+		(void) platform_device_register(&mmc_omap_device2);
+	}
+#endif
+	return;
+}
+#else
+static inline void omap_init_mmc(void) {}
+#endif
+
+#if	defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define	OMAP_WDT_BASE		0x48022000
+#else
+#define	OMAP_WDT_BASE		0xfffeb000
+#endif
+
+static struct resource wdt_resources[] = {
+	{
+		.start		= OMAP_WDT_BASE,
+		.end		= OMAP_WDT_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_wdt_device = {
+	.name	   = "omap_wdt",
+	.id	     = -1,
+	.dev = {
+		.release	= omap_nop_release,
+	},
+	.num_resources	= ARRAY_SIZE(wdt_resources),
+	.resource	= wdt_resources,
+};
+
+static void omap_init_wdt(void)
+{
+	(void) platform_device_register(&omap_wdt_device);
+}
+#else
+static inline void omap_init_wdt(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if	defined(CONFIG_OMAP_RNG) || defined(CONFIG_OMAP_RNG_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define	OMAP_RNG_BASE		0x480A0000
+#else
+#define	OMAP_RNG_BASE		0xfffe5000
+#endif
+
+static struct resource rng_resources[] = {
+	{
+		.start		= OMAP_RNG_BASE,
+		.end		= OMAP_RNG_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_rng_device = {
+	.name	   = "omap_rng",
+	.id	     = -1,
+	.dev = {
+		.release	= omap_nop_release,
+	},
+	.num_resources	= ARRAY_SIZE(rng_resources),
+	.resource	= rng_resources,
+};
+
+static void omap_init_rng(void)
+{
+	(void) platform_device_register(&omap_rng_device);
+}
+#else
+static inline void omap_init_rng(void) {}
+#endif
+
+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+
+static struct omap_lcd_config omap_fb_conf;
+
+static u64 omap_fb_dma_mask = ~(u32)0;
+
+static struct platform_device omap_fb_device = {
+	.name		= "omapfb",
+	.id		= -1,
+	.dev = {
+		.release		= omap_nop_release,
+		.dma_mask		= &omap_fb_dma_mask,
+		.coherent_dma_mask	= ~(u32)0,
+		.platform_data		= &omap_fb_conf,
+	},
+	.num_resources = 0,
+};
+
+static inline void omap_init_fb(void)
+{
+	const struct omap_lcd_config *conf;
+
+	conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
+	if (conf != NULL)
+		omap_fb_conf = *conf;
+	platform_device_register(&omap_fb_device);
+}
+
+#else
+
+static inline void omap_init_fb(void) {}
+
+#endif
+
+/*
+ * This gets called after board-specific INIT_MACHINE, and initializes most
+ * on-chip peripherals accessible on this board (except for few like USB):
+ *
+ *  (a) Does any "standard config" pin muxing needed.  Board-specific
+ *	code will have muxed GPIO pins and done "nonstandard" setup;
+ *	that code could live in the boot loader.
+ *  (b) Populating board-specific platform_data with the data drivers
+ *	rely on to handle wiring variations.
+ *  (c) Creating platform devices as meaningful on this board and
+ *	with this kernel configuration.
+ *
+ * Claiming GPIOs, and setting their direction and initial values, is the
+ * responsibility of the device drivers.  So is responding to probe().
+ *
+ * Board-specific knowlege like creating devices or pin setup is to be
+ * kept out of drivers as much as possible.  In particular, pin setup
+ * may be handled by the boot loader, and drivers should expect it will
+ * normally have been done by the time they're probed.
+ */
+static int __init omap_init_devices(void)
+{
+	/* please keep these calls, and their implementations above,
+	 * in alphabetical order so they're easier to sort through.
+	 */
+	omap_init_fb();
+	omap_init_i2c();
+	omap_init_mmc();
+	omap_init_wdt();
+	omap_init_rng();
+
+	return 0;
+}
+arch_initcall(omap_init_devices);
+
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index da7b65145658..f5cc21ad0956 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -6,6 +6,8 @@
  * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
  * Graphics DMA and LCD DMA graphics tranformations
  * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2 support Copyright (C) 2004-2005 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
  * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  *
  * Support functions for the OMAP internal DMA channels.
@@ -31,8 +33,15 @@
 
 #include <asm/arch/tc.h>
 
-#define OMAP_DMA_ACTIVE		0x01
+#define DEBUG_PRINTS
+#undef DEBUG_PRINTS
+#ifdef DEBUG_PRINTS
+#define debug_printk(x) printk x
+#else
+#define	debug_printk(x)
+#endif
 
+#define OMAP_DMA_ACTIVE		0x01
 #define OMAP_DMA_CCR_EN		(1 << 7)
 
 #define OMAP_FUNC_MUX_ARM_BASE	(0xfffe1000 + 0xec)
@@ -55,7 +64,7 @@ static int dma_chan_count;
 static spinlock_t dma_chan_lock;
 static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT];
 
-const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
+const static u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
 	INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
 	INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
 	INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
@@ -63,6 +72,20 @@ const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
 	INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
 };
 
+#define REVISIT_24XX()		printk(KERN_ERR "FIXME: no %s on 24xx\n", \
+						__FUNCTION__);
+
+#ifdef CONFIG_ARCH_OMAP15XX
+/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
+int omap_dma_in_1510_mode(void)
+{
+	return enable_1510_mode;
+}
+#else
+#define omap_dma_in_1510_mode()		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
 static inline int get_gdma_dev(int req)
 {
 	u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
@@ -82,6 +105,9 @@ static inline void set_gdma_dev(int req, int dev)
 	l |= (dev - 1) << shift;
 	omap_writel(l, reg);
 }
+#else
+#define set_gdma_dev(req, dev)	do {} while (0)
+#endif
 
 static void clear_lch_regs(int lch)
 {
@@ -121,38 +147,62 @@ void omap_set_dma_priority(int dst_port, int priority)
 }
 
 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
-				  int frame_count, int sync_mode)
+				  int frame_count, int sync_mode,
+				  int dma_trigger, int src_or_dst_synch)
 {
-	u16 w;
+	OMAP_DMA_CSDP_REG(lch) &= ~0x03;
+	OMAP_DMA_CSDP_REG(lch) |= data_type;
 
-	w = omap_readw(OMAP_DMA_CSDP(lch));
-	w &= ~0x03;
-	w |= data_type;
-	omap_writew(w, OMAP_DMA_CSDP(lch));
+	if (cpu_class_is_omap1()) {
+		OMAP_DMA_CCR_REG(lch) &= ~(1 << 5);
+		if (sync_mode == OMAP_DMA_SYNC_FRAME)
+			OMAP_DMA_CCR_REG(lch) |= 1 << 5;
+
+		OMAP1_DMA_CCR2_REG(lch) &= ~(1 << 2);
+		if (sync_mode == OMAP_DMA_SYNC_BLOCK)
+			OMAP1_DMA_CCR2_REG(lch) |= 1 << 2;
+	}
+
+	if (cpu_is_omap24xx() && dma_trigger) {
+		u32 val = OMAP_DMA_CCR_REG(lch);
+
+		if (dma_trigger > 63)
+			val |= 1 << 20;
+		if (dma_trigger > 31)
+			val |= 1 << 19;
 
-	w = omap_readw(OMAP_DMA_CCR(lch));
-	w &= ~(1 << 5);
-	if (sync_mode == OMAP_DMA_SYNC_FRAME)
-		w |= 1 << 5;
-	omap_writew(w, OMAP_DMA_CCR(lch));
+		val |= (dma_trigger & 0x1f);
 
-	w = omap_readw(OMAP_DMA_CCR2(lch));
-	w &= ~(1 << 2);
-	if (sync_mode == OMAP_DMA_SYNC_BLOCK)
-		w |= 1 << 2;
-	omap_writew(w, OMAP_DMA_CCR2(lch));
+		if (sync_mode & OMAP_DMA_SYNC_FRAME)
+			val |= 1 << 5;
 
-	omap_writew(elem_count, OMAP_DMA_CEN(lch));
-	omap_writew(frame_count, OMAP_DMA_CFN(lch));
+		if (sync_mode & OMAP_DMA_SYNC_BLOCK)
+			val |= 1 << 18;
 
+		if (src_or_dst_synch)
+			val |= 1 << 24;		/* source synch */
+		else
+			val &= ~(1 << 24);	/* dest synch */
+
+		OMAP_DMA_CCR_REG(lch) = val;
+	}
+
+	OMAP_DMA_CEN_REG(lch) = elem_count;
+	OMAP_DMA_CFN_REG(lch) = frame_count;
 }
+
 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 {
 	u16 w;
 
 	BUG_ON(omap_dma_in_1510_mode());
 
-	w = omap_readw(OMAP_DMA_CCR2(lch)) & ~0x03;
+	if (cpu_is_omap24xx()) {
+		REVISIT_24XX();
+		return;
+	}
+
+	w = OMAP1_DMA_CCR2_REG(lch) & ~0x03;
 	switch (mode) {
 	case OMAP_DMA_CONSTANT_FILL:
 		w |= 0x01;
@@ -165,63 +215,84 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 	default:
 		BUG();
 	}
-	omap_writew(w, OMAP_DMA_CCR2(lch));
+	OMAP1_DMA_CCR2_REG(lch) = w;
 
-	w = omap_readw(OMAP_DMA_LCH_CTRL(lch)) & ~0x0f;
+	w = OMAP1_DMA_LCH_CTRL_REG(lch) & ~0x0f;
 	/* Default is channel type 2D */
 	if (mode) {
-		omap_writew((u16)color, OMAP_DMA_COLOR_L(lch));
-		omap_writew((u16)(color >> 16), OMAP_DMA_COLOR_U(lch));
+		OMAP1_DMA_COLOR_L_REG(lch) = (u16)color;
+		OMAP1_DMA_COLOR_U_REG(lch) = (u16)(color >> 16);
 		w |= 1;		/* Channel type G */
 	}
-	omap_writew(w, OMAP_DMA_LCH_CTRL(lch));
+	OMAP1_DMA_LCH_CTRL_REG(lch) = w;
 }
 
-
+/* Note that src_port is only for omap1 */
 void omap_set_dma_src_params(int lch, int src_port, int src_amode,
-			     unsigned long src_start)
+			     unsigned long src_start,
+			     int src_ei, int src_fi)
 {
-	u16 w;
+	if (cpu_class_is_omap1()) {
+		OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 2);
+		OMAP_DMA_CSDP_REG(lch) |= src_port << 2;
+	}
+
+	OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 12);
+	OMAP_DMA_CCR_REG(lch) |= src_amode << 12;
+
+	if (cpu_class_is_omap1()) {
+		OMAP1_DMA_CSSA_U_REG(lch) = src_start >> 16;
+		OMAP1_DMA_CSSA_L_REG(lch) = src_start;
+	}
 
-	w = omap_readw(OMAP_DMA_CSDP(lch));
-	w &= ~(0x1f << 2);
-	w |= src_port << 2;
-	omap_writew(w, OMAP_DMA_CSDP(lch));
+	if (cpu_is_omap24xx())
+		OMAP2_DMA_CSSA_REG(lch) = src_start;
 
-	w = omap_readw(OMAP_DMA_CCR(lch));
-	w &= ~(0x03 << 12);
-	w |= src_amode << 12;
-	omap_writew(w, OMAP_DMA_CCR(lch));
+	OMAP_DMA_CSEI_REG(lch) = src_ei;
+	OMAP_DMA_CSFI_REG(lch) = src_fi;
+}
 
-	omap_writew(src_start >> 16, OMAP_DMA_CSSA_U(lch));
-	omap_writew(src_start, OMAP_DMA_CSSA_L(lch));
+void omap_set_dma_params(int lch, struct omap_dma_channel_params * params)
+{
+	omap_set_dma_transfer_params(lch, params->data_type,
+				     params->elem_count, params->frame_count,
+				     params->sync_mode, params->trigger,
+				     params->src_or_dst_synch);
+	omap_set_dma_src_params(lch, params->src_port,
+				params->src_amode, params->src_start,
+				params->src_ei, params->src_fi);
+
+	omap_set_dma_dest_params(lch, params->dst_port,
+				 params->dst_amode, params->dst_start,
+				 params->dst_ei, params->dst_fi);
 }
 
 void omap_set_dma_src_index(int lch, int eidx, int fidx)
 {
-	omap_writew(eidx, OMAP_DMA_CSEI(lch));
-	omap_writew(fidx, OMAP_DMA_CSFI(lch));
+	if (cpu_is_omap24xx()) {
+		REVISIT_24XX();
+		return;
+	}
+	OMAP_DMA_CSEI_REG(lch) = eidx;
+	OMAP_DMA_CSFI_REG(lch) = fidx;
 }
 
 void omap_set_dma_src_data_pack(int lch, int enable)
 {
-	u16 w;
-
-	w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 6);
-	w |= enable ? (1 << 6) : 0;
-	omap_writew(w, OMAP_DMA_CSDP(lch));
+	OMAP_DMA_CSDP_REG(lch) &= ~(1 << 6);
+	if (enable)
+		OMAP_DMA_CSDP_REG(lch) |= (1 << 6);
 }
 
 void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 {
-	u16 w;
+	OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
 
-	w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 7);
 	switch (burst_mode) {
 	case OMAP_DMA_DATA_BURST_DIS:
 		break;
 	case OMAP_DMA_DATA_BURST_4:
-		w |= (0x01 << 7);
+		OMAP_DMA_CSDP_REG(lch) |= (0x02 << 7);
 		break;
 	case OMAP_DMA_DATA_BURST_8:
 		/* not supported by current hardware
@@ -231,110 +302,283 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 	default:
 		BUG();
 	}
-	omap_writew(w, OMAP_DMA_CSDP(lch));
 }
 
+/* Note that dest_port is only for OMAP1 */
 void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
-			      unsigned long dest_start)
+			      unsigned long dest_start,
+			      int dst_ei, int dst_fi)
 {
-	u16 w;
+	if (cpu_class_is_omap1()) {
+		OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 9);
+		OMAP_DMA_CSDP_REG(lch) |= dest_port << 9;
+	}
 
-	w = omap_readw(OMAP_DMA_CSDP(lch));
-	w &= ~(0x1f << 9);
-	w |= dest_port << 9;
-	omap_writew(w, OMAP_DMA_CSDP(lch));
+	OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 14);
+	OMAP_DMA_CCR_REG(lch) |= dest_amode << 14;
+
+	if (cpu_class_is_omap1()) {
+		OMAP1_DMA_CDSA_U_REG(lch) = dest_start >> 16;
+		OMAP1_DMA_CDSA_L_REG(lch) = dest_start;
+	}
 
-	w = omap_readw(OMAP_DMA_CCR(lch));
-	w &= ~(0x03 << 14);
-	w |= dest_amode << 14;
-	omap_writew(w, OMAP_DMA_CCR(lch));
+	if (cpu_is_omap24xx())
+		OMAP2_DMA_CDSA_REG(lch) = dest_start;
 
-	omap_writew(dest_start >> 16, OMAP_DMA_CDSA_U(lch));
-	omap_writew(dest_start, OMAP_DMA_CDSA_L(lch));
+	OMAP_DMA_CDEI_REG(lch) = dst_ei;
+	OMAP_DMA_CDFI_REG(lch) = dst_fi;
 }
 
 void omap_set_dma_dest_index(int lch, int eidx, int fidx)
 {
-	omap_writew(eidx, OMAP_DMA_CDEI(lch));
-	omap_writew(fidx, OMAP_DMA_CDFI(lch));
+	if (cpu_is_omap24xx()) {
+		REVISIT_24XX();
+		return;
+	}
+	OMAP_DMA_CDEI_REG(lch) = eidx;
+	OMAP_DMA_CDFI_REG(lch) = fidx;
 }
 
 void omap_set_dma_dest_data_pack(int lch, int enable)
 {
-	u16 w;
-
-	w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 13);
-	w |= enable ? (1 << 13) : 0;
-	omap_writew(w, OMAP_DMA_CSDP(lch));
+	OMAP_DMA_CSDP_REG(lch) &= ~(1 << 13);
+	if (enable)
+		OMAP_DMA_CSDP_REG(lch) |= 1 << 13;
 }
 
 void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 {
-	u16 w;
+	OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
 
-	w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 14);
 	switch (burst_mode) {
 	case OMAP_DMA_DATA_BURST_DIS:
 		break;
 	case OMAP_DMA_DATA_BURST_4:
-		w |= (0x01 << 14);
+		OMAP_DMA_CSDP_REG(lch) |= (0x02 << 14);
 		break;
 	case OMAP_DMA_DATA_BURST_8:
-		w |= (0x03 << 14);
+		OMAP_DMA_CSDP_REG(lch) |= (0x03 << 14);
 		break;
 	default:
 		printk(KERN_ERR "Invalid DMA burst mode\n");
 		BUG();
 		return;
 	}
-	omap_writew(w, OMAP_DMA_CSDP(lch));
 }
 
-static inline void init_intr(int lch)
+static inline void omap_enable_channel_irq(int lch)
 {
-	u16 w;
+	u32 status;
 
 	/* Read CSR to make sure it's cleared. */
-	w = omap_readw(OMAP_DMA_CSR(lch));
+	status = OMAP_DMA_CSR_REG(lch);
+
 	/* Enable some nice interrupts. */
-	omap_writew(dma_chan[lch].enabled_irqs, OMAP_DMA_CICR(lch));
+	OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
+
 	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 }
 
-static inline void enable_lnk(int lch)
+static void omap_disable_channel_irq(int lch)
 {
-	u16 w;
+	if (cpu_is_omap24xx())
+		OMAP_DMA_CICR_REG(lch) = 0;
+}
+
+void omap_enable_dma_irq(int lch, u16 bits)
+{
+	dma_chan[lch].enabled_irqs |= bits;
+}
 
-	/* Clear the STOP_LNK bits */
-	w = omap_readw(OMAP_DMA_CLNK_CTRL(lch));
-	w &= ~(1 << 14);
-	omap_writew(w, OMAP_DMA_CLNK_CTRL(lch));
+void omap_disable_dma_irq(int lch, u16 bits)
+{
+	dma_chan[lch].enabled_irqs &= ~bits;
+}
+
+static inline void enable_lnk(int lch)
+{
+	if (cpu_class_is_omap1())
+		OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 14);
 
-	/* And set the ENABLE_LNK bits */
+	/* Set the ENABLE_LNK bits */
 	if (dma_chan[lch].next_lch != -1)
-		omap_writew(dma_chan[lch].next_lch | (1 << 15),
-			    OMAP_DMA_CLNK_CTRL(lch));
+		OMAP_DMA_CLNK_CTRL_REG(lch) =
+			dma_chan[lch].next_lch | (1 << 15);
 }
 
 static inline void disable_lnk(int lch)
 {
-	u16 w;
-
 	/* Disable interrupts */
-	omap_writew(0, OMAP_DMA_CICR(lch));
+	if (cpu_class_is_omap1()) {
+		OMAP_DMA_CICR_REG(lch) = 0;
+		/* Set the STOP_LNK bit */
+		OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14;
+	}
 
-	/* Set the STOP_LNK bit */
-	w = omap_readw(OMAP_DMA_CLNK_CTRL(lch));
-	w |= (1 << 14);
-	w = omap_writew(w, OMAP_DMA_CLNK_CTRL(lch));
+	if (cpu_is_omap24xx()) {
+		omap_disable_channel_irq(lch);
+		/* Clear the ENABLE_LNK bit */
+		OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15);
+	}
 
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 
-void omap_start_dma(int lch)
+static inline void omap2_enable_irq_lch(int lch)
 {
-	u16 w;
+	u32 val;
+
+	if (!cpu_is_omap24xx())
+		return;
+
+	val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
+	val |= 1 << lch;
+	omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
+}
+
+int omap_request_dma(int dev_id, const char *dev_name,
+		     void (* callback)(int lch, u16 ch_status, void *data),
+		     void *data, int *dma_ch_out)
+{
+	int ch, free_ch = -1;
+	unsigned long flags;
+	struct omap_dma_lch *chan;
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	for (ch = 0; ch < dma_chan_count; ch++) {
+		if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
+			free_ch = ch;
+			if (dev_id == 0)
+				break;
+		}
+	}
+	if (free_ch == -1) {
+		spin_unlock_irqrestore(&dma_chan_lock, flags);
+		return -EBUSY;
+	}
+	chan = dma_chan + free_ch;
+	chan->dev_id = dev_id;
+
+	if (cpu_class_is_omap1())
+		clear_lch_regs(free_ch);
 
+	if (cpu_is_omap24xx())
+		omap_clear_dma(free_ch);
+
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+	chan->dev_name = dev_name;
+	chan->callback = callback;
+	chan->data = data;
+	chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ |
+				OMAP_DMA_BLOCK_IRQ;
+
+	if (cpu_is_omap24xx())
+		chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ;
+
+	if (cpu_is_omap16xx()) {
+		/* If the sync device is set, configure it dynamically. */
+		if (dev_id != 0) {
+			set_gdma_dev(free_ch + 1, dev_id);
+			dev_id = free_ch + 1;
+		}
+		/* Disable the 1510 compatibility mode and set the sync device
+		 * id. */
+		OMAP_DMA_CCR_REG(free_ch) = dev_id | (1 << 10);
+	} else if (cpu_is_omap730() || cpu_is_omap15xx()) {
+		OMAP_DMA_CCR_REG(free_ch) = dev_id;
+	}
+
+	if (cpu_is_omap24xx()) {
+		omap2_enable_irq_lch(free_ch);
+
+		omap_enable_channel_irq(free_ch);
+		/* Clear the CSR register and IRQ status register */
+		OMAP_DMA_CSR_REG(free_ch) = 0x0;
+		omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
+	}
+
+	*dma_ch_out = free_ch;
+
+	return 0;
+}
+
+void omap_free_dma(int lch)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	if (dma_chan[lch].dev_id == -1) {
+		printk("omap_dma: trying to free nonallocated DMA channel %d\n",
+		       lch);
+		spin_unlock_irqrestore(&dma_chan_lock, flags);
+		return;
+	}
+	dma_chan[lch].dev_id = -1;
+	dma_chan[lch].next_lch = -1;
+	dma_chan[lch].callback = NULL;
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+	if (cpu_class_is_omap1()) {
+		/* Disable all DMA interrupts for the channel. */
+		OMAP_DMA_CICR_REG(lch) = 0;
+		/* Make sure the DMA transfer is stopped. */
+		OMAP_DMA_CCR_REG(lch) = 0;
+	}
+
+	if (cpu_is_omap24xx()) {
+		u32 val;
+		/* Disable interrupts */
+		val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
+		val &= ~(1 << lch);
+		omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
+
+		/* Clear the CSR register and IRQ status register */
+		OMAP_DMA_CSR_REG(lch) = 0x0;
+
+		val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
+		val |= 1 << lch;
+		omap_writel(val, OMAP_DMA4_IRQSTATUS_L0);
+
+		/* Disable all DMA interrupts for the channel. */
+		OMAP_DMA_CICR_REG(lch) = 0;
+
+		/* Make sure the DMA transfer is stopped. */
+		OMAP_DMA_CCR_REG(lch) = 0;
+		omap_clear_dma(lch);
+	}
+}
+
+/*
+ * Clears any DMA state so the DMA engine is ready to restart with new buffers
+ * through omap_start_dma(). Any buffers in flight are discarded.
+ */
+void omap_clear_dma(int lch)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	if (cpu_class_is_omap1()) {
+		int status;
+		OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
+
+		/* Clear pending interrupts */
+		status = OMAP_DMA_CSR_REG(lch);
+	}
+
+	if (cpu_is_omap24xx()) {
+		int i;
+		u32 lch_base = OMAP24XX_DMA_BASE + lch * 0x60 + 0x80;
+		for (i = 0; i < 0x44; i += 4)
+			omap_writel(0, lch_base + i);
+	}
+
+	local_irq_restore(flags);
+}
+
+void omap_start_dma(int lch)
+{
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch;
 		char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
@@ -348,31 +592,37 @@ void omap_start_dma(int lch)
 		do {
 			next_lch = dma_chan[cur_lch].next_lch;
 
-                        /* The loop case: we've been here already */
+			/* The loop case: we've been here already */
 			if (dma_chan_link_map[cur_lch])
 				break;
 			/* Mark the current channel */
 			dma_chan_link_map[cur_lch] = 1;
 
 			enable_lnk(cur_lch);
-			init_intr(cur_lch);
+			omap_enable_channel_irq(cur_lch);
 
 			cur_lch = next_lch;
 		} while (next_lch != -1);
+	} else if (cpu_is_omap24xx()) {
+		/* Errata: Need to write lch even if not using chaining */
+		OMAP_DMA_CLNK_CTRL_REG(lch) = lch;
 	}
 
-	init_intr(lch);
+	omap_enable_channel_irq(lch);
+
+	/* Errata: On ES2.0 BUFFERING disable must be set.
+	 * This will always fail on ES1.0 */
+	if (cpu_is_omap24xx()) {
+		OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
+	}
+
+	OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
 
-	w = omap_readw(OMAP_DMA_CCR(lch));
-	w |= OMAP_DMA_CCR_EN;
-	omap_writew(w, OMAP_DMA_CCR(lch));
 	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 }
 
 void omap_stop_dma(int lch)
 {
-	u16 w;
-
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
 		char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
@@ -393,146 +643,83 @@ void omap_stop_dma(int lch)
 
 		return;
 	}
+
 	/* Disable all interrupts on the channel */
-	omap_writew(0, OMAP_DMA_CICR(lch));
+	if (cpu_class_is_omap1())
+		OMAP_DMA_CICR_REG(lch) = 0;
 
-	w = omap_readw(OMAP_DMA_CCR(lch));
-	w &= ~OMAP_DMA_CCR_EN;
-	omap_writew(w, OMAP_DMA_CCR(lch));
+	OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 
-void omap_enable_dma_irq(int lch, u16 bits)
+/*
+ * Returns current physical source address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CSSA_L register overflow inbetween the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_src_pos(int lch)
 {
-	dma_chan[lch].enabled_irqs |= bits;
-}
+	dma_addr_t offset;
 
-void omap_disable_dma_irq(int lch, u16 bits)
-{
-	dma_chan[lch].enabled_irqs &= ~bits;
-}
+	if (cpu_class_is_omap1())
+		offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) |
+				       (OMAP1_DMA_CSSA_U_REG(lch) << 16));
 
-static int dma_handle_ch(int ch)
-{
-	u16 csr;
+	if (cpu_is_omap24xx())
+		offset = OMAP_DMA_CSAC_REG(lch);
 
-	if (enable_1510_mode && ch >= 6) {
-		csr = dma_chan[ch].saved_csr;
-		dma_chan[ch].saved_csr = 0;
-	} else
-		csr = omap_readw(OMAP_DMA_CSR(ch));
-	if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
-		dma_chan[ch + 6].saved_csr = csr >> 7;
-		csr &= 0x7f;
-	}
-	if ((csr & 0x3f) == 0)
-		return 0;
-	if (unlikely(dma_chan[ch].dev_id == -1)) {
-		printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n",
-		       ch, csr);
-		return 0;
-	}
-	if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
-		printk(KERN_WARNING "DMA timeout with device %d\n", dma_chan[ch].dev_id);
-	if (unlikely(csr & OMAP_DMA_DROP_IRQ))
-		printk(KERN_WARNING "DMA synchronization event drop occurred with device %d\n",
-		       dma_chan[ch].dev_id);
-	if (likely(csr & OMAP_DMA_BLOCK_IRQ))
-		dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
-	if (likely(dma_chan[ch].callback != NULL))
-		dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
-	return 1;
+	return offset;
 }
 
-static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+/*
+ * Returns current physical destination address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CDSA_L register overflow inbetween the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_dst_pos(int lch)
 {
-	int ch = ((int) dev_id) - 1;
-	int handled = 0;
+	dma_addr_t offset;
 
-	for (;;) {
-		int handled_now = 0;
+	if (cpu_class_is_omap1())
+		offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) |
+				       (OMAP1_DMA_CDSA_U_REG(lch) << 16));
 
-		handled_now += dma_handle_ch(ch);
-		if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
-			handled_now += dma_handle_ch(ch + 6);
-		if (!handled_now)
-			break;
-		handled += handled_now;
-	}
+	if (cpu_is_omap24xx())
+		offset = OMAP2_DMA_CDSA_REG(lch);
 
-	return handled ? IRQ_HANDLED : IRQ_NONE;
+	return offset;
 }
 
-int omap_request_dma(int dev_id, const char *dev_name,
-		     void (* callback)(int lch, u16 ch_status, void *data),
-		     void *data, int *dma_ch_out)
+/*
+ * Returns current source transfer counting for the given DMA channel.
+ * Can be used to monitor the progress of a transfer inside a block.
+ * It must be called with disabled interrupts.
+ */
+int omap_get_dma_src_addr_counter(int lch)
 {
-	int ch, free_ch = -1;
-	unsigned long flags;
-	struct omap_dma_lch *chan;
-
-	spin_lock_irqsave(&dma_chan_lock, flags);
-	for (ch = 0; ch < dma_chan_count; ch++) {
-		if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
-			free_ch = ch;
-			if (dev_id == 0)
-				break;
-		}
-	}
-	if (free_ch == -1) {
-		spin_unlock_irqrestore(&dma_chan_lock, flags);
-		return -EBUSY;
-	}
-	chan = dma_chan + free_ch;
-	chan->dev_id = dev_id;
-	clear_lch_regs(free_ch);
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
-
-	chan->dev_id = dev_id;
-	chan->dev_name = dev_name;
-	chan->callback = callback;
-	chan->data = data;
-	chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
-
-	if (cpu_is_omap16xx()) {
-		/* If the sync device is set, configure it dynamically. */
-		if (dev_id != 0) {
-			set_gdma_dev(free_ch + 1, dev_id);
-			dev_id = free_ch + 1;
-		}
-		/* Disable the 1510 compatibility mode and set the sync device
-		 * id. */
-		omap_writew(dev_id | (1 << 10), OMAP_DMA_CCR(free_ch));
-	} else {
-		omap_writew(dev_id, OMAP_DMA_CCR(free_ch));
-	}
-	*dma_ch_out = free_ch;
-
-	return 0;
+	return (dma_addr_t) OMAP_DMA_CSAC_REG(lch);
 }
 
-void omap_free_dma(int ch)
+int omap_dma_running(void)
 {
-	unsigned long flags;
+	int lch;
 
-	spin_lock_irqsave(&dma_chan_lock, flags);
-	if (dma_chan[ch].dev_id == -1) {
-		printk("omap_dma: trying to free nonallocated DMA channel %d\n", ch);
-		spin_unlock_irqrestore(&dma_chan_lock, flags);
-		return;
-	}
-	dma_chan[ch].dev_id = -1;
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
+	/* Check if LCD DMA is running */
+	if (cpu_is_omap16xx())
+		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+			return 1;
 
-	/* Disable all DMA interrupts for the channel. */
-	omap_writew(0, OMAP_DMA_CICR(ch));
-	/* Make sure the DMA transfer is stopped. */
-	omap_writew(0, OMAP_DMA_CCR(ch));
-}
+	for (lch = 0; lch < dma_chan_count; lch++)
+		if (OMAP_DMA_CCR_REG(lch) & OMAP_DMA_CCR_EN)
+			return 1;
 
-int omap_dma_in_1510_mode(void)
-{
-	return enable_1510_mode;
+	return 0;
 }
 
 /*
@@ -550,7 +737,8 @@ void omap_dma_link_lch (int lch_head, int lch_queue)
 
 	if ((dma_chan[lch_head].dev_id == -1) ||
 	    (dma_chan[lch_queue].dev_id == -1)) {
-		printk(KERN_ERR "omap_dma: trying to link non requested channels\n");
+		printk(KERN_ERR "omap_dma: trying to link "
+		       "non requested channels\n");
 		dump_stack();
 	}
 
@@ -570,20 +758,149 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue)
 
 	if (dma_chan[lch_head].next_lch != lch_queue ||
 	    dma_chan[lch_head].next_lch == -1) {
-		printk(KERN_ERR "omap_dma: trying to unlink non linked channels\n");
+		printk(KERN_ERR "omap_dma: trying to unlink "
+		       "non linked channels\n");
 		dump_stack();
 	}
 
 
 	if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
 	    (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
-		printk(KERN_ERR "omap_dma: You need to stop the DMA channels before unlinking\n");
+		printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
+		       "before unlinking\n");
 		dump_stack();
 	}
 
 	dma_chan[lch_head].next_lch = -1;
 }
 
+/*----------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP1
+
+static int omap1_dma_handle_ch(int ch)
+{
+	u16 csr;
+
+	if (enable_1510_mode && ch >= 6) {
+		csr = dma_chan[ch].saved_csr;
+		dma_chan[ch].saved_csr = 0;
+	} else
+		csr = OMAP_DMA_CSR_REG(ch);
+	if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
+		dma_chan[ch + 6].saved_csr = csr >> 7;
+		csr &= 0x7f;
+	}
+	if ((csr & 0x3f) == 0)
+		return 0;
+	if (unlikely(dma_chan[ch].dev_id == -1)) {
+		printk(KERN_WARNING "Spurious interrupt from DMA channel "
+		       "%d (CSR %04x)\n", ch, csr);
+		return 0;
+	}
+	if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
+		printk(KERN_WARNING "DMA timeout with device %d\n",
+		       dma_chan[ch].dev_id);
+	if (unlikely(csr & OMAP_DMA_DROP_IRQ))
+		printk(KERN_WARNING "DMA synchronization event drop occurred "
+		       "with device %d\n", dma_chan[ch].dev_id);
+	if (likely(csr & OMAP_DMA_BLOCK_IRQ))
+		dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
+	if (likely(dma_chan[ch].callback != NULL))
+		dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
+	return 1;
+}
+
+static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id,
+					 struct pt_regs *regs)
+{
+	int ch = ((int) dev_id) - 1;
+	int handled = 0;
+
+	for (;;) {
+		int handled_now = 0;
+
+		handled_now += omap1_dma_handle_ch(ch);
+		if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
+			handled_now += omap1_dma_handle_ch(ch + 6);
+		if (!handled_now)
+			break;
+		handled += handled_now;
+	}
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+#else
+#define omap1_dma_irq_handler	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2
+
+static int omap2_dma_handle_ch(int ch)
+{
+	u32 status = OMAP_DMA_CSR_REG(ch);
+	u32 val;
+
+	if (!status)
+		return 0;
+	if (unlikely(dma_chan[ch].dev_id == -1))
+		return 0;
+	/* REVISIT: According to 24xx TRM, there's no TOUT_IE */
+	if (unlikely(status & OMAP_DMA_TOUT_IRQ))
+		printk(KERN_INFO "DMA timeout with device %d\n",
+		       dma_chan[ch].dev_id);
+	if (unlikely(status & OMAP_DMA_DROP_IRQ))
+		printk(KERN_INFO
+		       "DMA synchronization event drop occurred with device "
+		       "%d\n", dma_chan[ch].dev_id);
+
+	if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
+		printk(KERN_INFO "DMA transaction error with device %d\n",
+		       dma_chan[ch].dev_id);
+
+	OMAP_DMA_CSR_REG(ch) = 0x20;
+
+	val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
+	/* ch in this function is from 0-31 while in register it is 1-32 */
+	val = 1 << (ch);
+	omap_writel(val, OMAP_DMA4_IRQSTATUS_L0);
+
+	if (likely(dma_chan[ch].callback != NULL))
+		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
+
+	return 0;
+}
+
+/* STATUS register count is from 1-32 while our is 0-31 */
+static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id,
+					 struct pt_regs *regs)
+{
+	u32 val;
+	int i;
+
+	val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
+
+	for (i = 1; i <= OMAP_LOGICAL_DMA_CH_COUNT; i++) {
+		int active = val & (1 << (i - 1));
+		if (active)
+			omap2_dma_handle_ch(i - 1);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction omap24xx_dma_irq = {
+	.name = "DMA",
+	.handler = omap2_dma_irq_handler,
+	.flags = SA_INTERRUPT
+};
+
+#else
+static struct irqaction omap24xx_dma_irq;
+#endif
+
+/*----------------------------------------------------------------------------*/
 
 static struct lcd_dma_info {
 	spinlock_t lock;
@@ -795,7 +1112,7 @@ static void set_b1_regs(void)
 	/* Always set the source port as SDRAM for now*/
 	w &= ~(0x03 << 6);
 	if (lcd_dma.callback != NULL)
-		w |= 1 << 1;            /* Block interrupt enable */
+		w |= 1 << 1;		/* Block interrupt enable */
 	else
 		w &= ~(1 << 1);
 	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
@@ -814,7 +1131,8 @@ static void set_b1_regs(void)
 	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
 }
 
-static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id,
+				       struct pt_regs *regs)
 {
 	u16 w;
 
@@ -870,7 +1188,8 @@ void omap_free_lcd_dma(void)
 		return;
 	}
 	if (!enable_1510_mode)
-		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR);
+		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
+			    OMAP1610_DMA_LCD_CCR);
 	lcd_dma.reserved = 0;
 	spin_unlock(&lcd_dma.lock);
 }
@@ -939,93 +1258,24 @@ void omap_stop_lcd_dma(void)
 	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 }
 
-/*
- * Clears any DMA state so the DMA engine is ready to restart with new buffers
- * through omap_start_dma(). Any buffers in flight are discarded.
- */
-void omap_clear_dma(int lch)
-{
-	unsigned long flags;
-	int status;
-
-	local_irq_save(flags);
-	omap_writew(omap_readw(OMAP_DMA_CCR(lch)) & ~OMAP_DMA_CCR_EN,
-		    OMAP_DMA_CCR(lch));
-	status = OMAP_DMA_CSR(lch);	/* clear pending interrupts */
-	local_irq_restore(flags);
-}
-
-/*
- * Returns current physical source address for the given DMA channel.
- * If the channel is running the caller must disable interrupts prior calling
- * this function and process the returned value before re-enabling interrupt to
- * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CSSA_L register overflow inbetween the two reads resulting
- * in incorrect return value.
- */
-dma_addr_t omap_get_dma_src_pos(int lch)
-{
-	return (dma_addr_t) (omap_readw(OMAP_DMA_CSSA_L(lch)) |
-	(omap_readw(OMAP_DMA_CSSA_U(lch)) << 16));
-}
-
-/*
- * Returns current physical destination address for the given DMA channel.
- * If the channel is running the caller must disable interrupts prior calling
- * this function and process the returned value before re-enabling interrupt to
- * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CDSA_L register overflow inbetween the two reads resulting
- * in incorrect return value.
- */
-dma_addr_t omap_get_dma_dst_pos(int lch)
-{
-	return (dma_addr_t) (omap_readw(OMAP_DMA_CDSA_L(lch)) |
-	(omap_readw(OMAP_DMA_CDSA_U(lch)) << 16));
-}
-
-/*
- * Returns current source transfer counting for the given DMA channel.
- * Can be used to monitor the progress of a transfer inside a  block.
- * It must be called with disabled interrupts.
- */
-int omap_get_dma_src_addr_counter(int lch)
-{
-	return (dma_addr_t) omap_readw(OMAP_DMA_CSAC(lch));
-}
-
-int omap_dma_running(void)
-{
-	int lch;
-
-	/* Check if LCD DMA is running */
-	if (cpu_is_omap16xx())
-		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
-			return 1;
-
-	for (lch = 0; lch < dma_chan_count; lch++) {
-		u16 w;
-
-		w = omap_readw(OMAP_DMA_CCR(lch));
-		if (w & OMAP_DMA_CCR_EN)
-			return 1;
-	}
-	return 0;
-}
+/*----------------------------------------------------------------------------*/
 
 static int __init omap_init_dma(void)
 {
 	int ch, r;
 
-	if (cpu_is_omap1510()) {
-		printk(KERN_INFO "DMA support for OMAP1510 initialized\n");
+	if (cpu_is_omap15xx()) {
+		printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
 		dma_chan_count = 9;
 		enable_1510_mode = 1;
 	} else if (cpu_is_omap16xx() || cpu_is_omap730()) {
 		printk(KERN_INFO "OMAP DMA hardware version %d\n",
 		       omap_readw(OMAP_DMA_HW_ID));
 		printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
-		       (omap_readw(OMAP_DMA_CAPS_0_U) << 16) | omap_readw(OMAP_DMA_CAPS_0_L),
-		       (omap_readw(OMAP_DMA_CAPS_1_U) << 16) | omap_readw(OMAP_DMA_CAPS_1_L),
+		       (omap_readw(OMAP_DMA_CAPS_0_U) << 16) |
+		       omap_readw(OMAP_DMA_CAPS_0_L),
+		       (omap_readw(OMAP_DMA_CAPS_1_U) << 16) |
+		       omap_readw(OMAP_DMA_CAPS_1_L),
 		       omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3),
 		       omap_readw(OMAP_DMA_CAPS_4));
 		if (!enable_1510_mode) {
@@ -1038,6 +1288,11 @@ static int __init omap_init_dma(void)
 			dma_chan_count = 16;
 		} else
 			dma_chan_count = 9;
+	} else if (cpu_is_omap24xx()) {
+		u8 revision = omap_readb(OMAP_DMA4_REVISION);
+		printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
+		       revision >> 4, revision & 0xf);
+		dma_chan_count = OMAP_LOGICAL_DMA_CH_COUNT;
 	} else {
 		dma_chan_count = 0;
 		return 0;
@@ -1049,41 +1304,56 @@ static int __init omap_init_dma(void)
 	memset(&dma_chan, 0, sizeof(dma_chan));
 
 	for (ch = 0; ch < dma_chan_count; ch++) {
+		omap_clear_dma(ch);
 		dma_chan[ch].dev_id = -1;
 		dma_chan[ch].next_lch = -1;
 
 		if (ch >= 6 && enable_1510_mode)
 			continue;
 
-		/* request_irq() doesn't like dev_id (ie. ch) being zero,
-		 * so we have to kludge around this. */
-		r = request_irq(dma_irq[ch], dma_irq_handler, 0, "DMA",
-				(void *) (ch + 1));
+		if (cpu_class_is_omap1()) {
+			/* request_irq() doesn't like dev_id (ie. ch) being
+			 * zero, so we have to kludge around this. */
+			r = request_irq(omap1_dma_irq[ch],
+					omap1_dma_irq_handler, 0, "DMA",
+					(void *) (ch + 1));
+			if (r != 0) {
+				int i;
+
+				printk(KERN_ERR "unable to request IRQ %d "
+				       "for DMA (error %d)\n",
+				       omap1_dma_irq[ch], r);
+				for (i = 0; i < ch; i++)
+					free_irq(omap1_dma_irq[i],
+						 (void *) (i + 1));
+				return r;
+			}
+		}
+	}
+
+	if (cpu_is_omap24xx())
+		setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+
+	/* FIXME: Update LCD DMA to work on 24xx */
+	if (cpu_class_is_omap1()) {
+		r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
+				"LCD DMA", NULL);
 		if (r != 0) {
 			int i;
 
-			printk(KERN_ERR "unable to request IRQ %d for DMA (error %d)\n",
-			       dma_irq[ch], r);
-			for (i = 0; i < ch; i++)
-				free_irq(dma_irq[i], (void *) (i + 1));
+			printk(KERN_ERR "unable to request IRQ for LCD DMA "
+			       "(error %d)\n", r);
+			for (i = 0; i < dma_chan_count; i++)
+				free_irq(omap1_dma_irq[i], (void *) (i + 1));
 			return r;
 		}
 	}
-	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, "LCD DMA", NULL);
-	if (r != 0) {
-		int i;
 
-		printk(KERN_ERR "unable to request IRQ for LCD DMA (error %d)\n", r);
-		for (i = 0; i < dma_chan_count; i++)
-			free_irq(dma_irq[i], (void *) (i + 1));
-		return r;
-	}
 	return 0;
 }
 
 arch_initcall(omap_init_dma);
 
-
 EXPORT_SYMBOL(omap_get_dma_src_pos);
 EXPORT_SYMBOL(omap_get_dma_dst_pos);
 EXPORT_SYMBOL(omap_get_dma_src_addr_counter);
@@ -1109,6 +1379,8 @@ EXPORT_SYMBOL(omap_set_dma_dest_index);
 EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
 EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
 
+EXPORT_SYMBOL(omap_set_dma_params);
+
 EXPORT_SYMBOL(omap_dma_link_lch);
 EXPORT_SYMBOL(omap_dma_unlink_lch);
 
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 55059a24ad41..76f721d85137 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -140,7 +140,7 @@ static struct gpio_bank gpio_bank_1610[5] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct gpio_bank gpio_bank_1510[2] = {
 	{ OMAP_MPUIO_BASE,    INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
 	{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE,  METHOD_GPIO_1510 }
@@ -173,7 +173,7 @@ static int gpio_bank_count;
 
 static inline struct gpio_bank *get_gpio_bank(int gpio)
 {
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		if (OMAP_GPIO_IS_MPUIO(gpio))
 			return &gpio_bank[0];
@@ -222,7 +222,7 @@ static inline int gpio_valid(int gpio)
 			return -1;
 		return 0;
 	}
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510() && gpio < 16)
 		return 0;
 #endif
@@ -654,7 +654,7 @@ int omap_request_gpio(int gpio)
 	/* Set trigger to none. You need to enable the trigger after request_irq */
 	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510) {
 		void __iomem *reg;
 
@@ -739,7 +739,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 	bank = (struct gpio_bank *) desc->data;
 	if (bank->method == METHOD_MPUIO)
 		isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510)
 		isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
 #endif
@@ -774,7 +774,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 			d = irq_desc + gpio_irq;
 			desc_handle_irq(gpio_irq, d, regs);
 		}
-        }
+	}
 }
 
 static void gpio_ack_irq(unsigned int irq)
@@ -837,8 +837,9 @@ static struct irqchip mpuio_irq_chip = {
 	.unmask = mpuio_unmask_irq
 };
 
-static int initialized = 0;
-static struct clk * gpio_ck = NULL;
+static int initialized;
+static struct clk * gpio_ick;
+static struct clk * gpio_fck;
 
 static int __init _omap_gpio_init(void)
 {
@@ -848,14 +849,26 @@ static int __init _omap_gpio_init(void)
 	initialized = 1;
 
 	if (cpu_is_omap1510()) {
-		gpio_ck = clk_get(NULL, "arm_gpio_ck");
-		if (IS_ERR(gpio_ck))
+		gpio_ick = clk_get(NULL, "arm_gpio_ck");
+		if (IS_ERR(gpio_ick))
 			printk("Could not get arm_gpio_ck\n");
 		else
-			clk_use(gpio_ck);
+			clk_use(gpio_ick);
+	}
+	if (cpu_is_omap24xx()) {
+		gpio_ick = clk_get(NULL, "gpios_ick");
+		if (IS_ERR(gpio_ick))
+			printk("Could not get gpios_ick\n");
+		else
+			clk_use(gpio_ick);
+		gpio_fck = clk_get(NULL, "gpios_fck");
+		if (IS_ERR(gpio_ick))
+			printk("Could not get gpios_fck\n");
+		else
+			clk_use(gpio_fck);
 	}
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		printk(KERN_INFO "OMAP1510 GPIO hardware\n");
 		gpio_bank_count = 2;
@@ -901,7 +914,7 @@ static int __init _omap_gpio_init(void)
 		if (bank->method == METHOD_MPUIO) {
 			omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT);
 		}
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 		if (bank->method == METHOD_GPIO_1510) {
 			__raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
 			__raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS);
@@ -1038,6 +1051,7 @@ static struct sys_device omap_gpio_device = {
 
 /*
  * This may get called early from board specific init
+ * for boards that have interrupts routed via FPGA.
  */
 int omap_gpio_init(void)
 {
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 9c9b7df3faf6..ea9475c86656 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -491,17 +491,20 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
 	omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch,
 				     OMAP_DMA_DATA_TYPE_S16,
 				     length >> 1, 1,
-				     OMAP_DMA_SYNC_ELEMENT);
+				     OMAP_DMA_SYNC_ELEMENT,
+				     0, 0);
 
 	omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
 				 OMAP_DMA_PORT_TIPB,
 				 OMAP_DMA_AMODE_CONSTANT,
-				 mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1);
+				 mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1,
+				 0, 0);
 
 	omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
 				OMAP_DMA_PORT_EMIFF,
 				OMAP_DMA_AMODE_POST_INC,
-				buffer);
+				buffer,
+				0, 0);
 
 	omap_start_dma(mcbsp[id].dma_tx_lch);
 	wait_for_completion(&(mcbsp[id].tx_dma_completion));
@@ -531,17 +534,20 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
 	omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch,
 				     OMAP_DMA_DATA_TYPE_S16,
 				     length >> 1, 1,
-				     OMAP_DMA_SYNC_ELEMENT);
+				     OMAP_DMA_SYNC_ELEMENT,
+				     0, 0);
 
 	omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
 				OMAP_DMA_PORT_TIPB,
 				OMAP_DMA_AMODE_CONSTANT,
-				mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1);
+				mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1,
+				0, 0);
 
 	omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
 				 OMAP_DMA_PORT_EMIFF,
 				 OMAP_DMA_AMODE_POST_INC,
-				 buffer);
+				 buffer,
+				 0, 0);
 
 	omap_start_dma(mcbsp[id].dma_rx_lch);
 	wait_for_completion(&(mcbsp[id].rx_dma_completion));
@@ -643,7 +649,7 @@ static const struct omap_mcbsp_info mcbsp_730[] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static const struct omap_mcbsp_info mcbsp_1510[] = {
 	[0] = { .virt_base = OMAP1510_MCBSP1_BASE,
 		.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
@@ -712,7 +718,7 @@ static int __init omap_mcbsp_init(void)
 		mcbsp_count = ARRAY_SIZE(mcbsp_730);
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		mcbsp_info = mcbsp_1510;
 		mcbsp_count = ARRAY_SIZE(mcbsp_1510);
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 64482040f89e..8c1c016aa689 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -3,7 +3,7 @@
  *
  * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
  *
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003 - 2005 Nokia Corporation
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
@@ -25,38 +25,74 @@
 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <linux/spinlock.h>
-
-#define __MUX_C__
 #include <asm/arch/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
+#define OMAP24XX_L4_BASE	0x48000000
+#define OMAP24XX_PULL_ENA	(1 << 3)
+#define OMAP24XX_PULL_UP	(1 << 4)
+
+static struct pin_config * pin_table;
+static unsigned long pin_table_sz;
+
+extern struct pin_config * omap730_pins;
+extern struct pin_config * omap1xxx_pins;
+extern struct pin_config * omap24xx_pins;
+
+int __init omap_mux_register(struct pin_config * pins, unsigned long size)
+{
+	pin_table = pins;
+	pin_table_sz = size;
+
+	return 0;
+}
+
 /*
  * Sets the Omap MUX and PULL_DWN registers based on the table
  */
-int __init_or_module
-omap_cfg_reg(const reg_cfg_t reg_cfg)
+int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
 
 	unsigned long flags;
-	reg_cfg_set *cfg;
+	struct pin_config *cfg;
 	unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
 		pull_orig = 0, pull = 0;
 	unsigned int mask, warn = 0;
 
-	if (cpu_is_omap7xx())
-		return 0;
+	if (!pin_table)
+		BUG();
 
-	if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) {
-		printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg);
-		return -EINVAL;
+	if (index >= pin_table_sz) {
+		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+		       index, pin_table_sz);
+		dump_stack();
+		return -ENODEV;
 	}
 
-	cfg = (reg_cfg_set *)&reg_cfg_table[reg_cfg];
+	cfg = (struct pin_config *)&pin_table[index];
+	if (cpu_is_omap24xx()) {
+		u8 reg = 0;
+
+		reg |= cfg->mask & 0x7;
+		if (cfg->pull_val)
+			reg |= OMAP24XX_PULL_ENA;
+		if(cfg->pu_pd_val)
+			reg |= OMAP24XX_PULL_UP;
+#ifdef CONFIG_OMAP_MUX_DEBUG
+		printk("Muxing %s (0x%08x): 0x%02x -> 0x%02x\n",
+		       cfg->name, OMAP24XX_L4_BASE + cfg->mux_reg,
+		       omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg), reg);
+#endif
+		omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg);
+
+		return 0;
+	}
 
 	/* Check the mux register in question */
 	if (cfg->mux_reg) {
@@ -157,7 +193,8 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 	return 0;
 #endif
 }
-
 EXPORT_SYMBOL(omap_cfg_reg);
-
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x)	do {} while(0)
 #endif	/* CONFIG_OMAP_MUX */
diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c
index e15c6c1ddec9..966cca031ca7 100644
--- a/arch/arm/plat-omap/pm.c
+++ b/arch/arm/plat-omap/pm.c
@@ -54,11 +54,12 @@
 #include <asm/arch/tps65010.h>
 #include <asm/arch/dsp_common.h>
 
-#include "clock.h"
-#include "sram.h"
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
+static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
@@ -120,8 +121,8 @@ void omap_pm_idle(void)
  */
 static void omap_pm_wakeup_setup(void)
 {
-	u32 level1_wake = OMAP_IRQ_BIT(INT_IH2_IRQ);
-	u32 level2_wake = OMAP_IRQ_BIT(INT_UART2) | OMAP_IRQ_BIT(INT_KEYBOARD);
+	u32 level1_wake = 0;
+	u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
 
 	/*
 	 * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
@@ -129,19 +130,29 @@ static void omap_pm_wakeup_setup(void)
 	 * drivers must still separately call omap_set_gpio_wakeup() to
 	 * wake up to a GPIO interrupt.
 	 */
-	if (cpu_is_omap1510() || cpu_is_omap16xx())
-		level1_wake |= OMAP_IRQ_BIT(INT_GPIO_BANK1);
-	else if (cpu_is_omap730())
-		level1_wake |= OMAP_IRQ_BIT(INT_730_GPIO_BANK1);
+	if (cpu_is_omap730())
+		level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_730_IH2_IRQ);
+	else if (cpu_is_omap1510())
+		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
+	else if (cpu_is_omap16xx())
+		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
 
 	omap_writel(~level1_wake, OMAP_IH1_MIR);
 
-	if (cpu_is_omap1510())
+	if (cpu_is_omap730()) {
+		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+		omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), OMAP_IH2_1_MIR);
+	} else if (cpu_is_omap1510()) {
+		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
 		omap_writel(~level2_wake,  OMAP_IH2_MIR);
-
-	/* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
-	if (cpu_is_omap16xx()) {
+	} else if (cpu_is_omap16xx()) {
+		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
 		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+
+		/* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
 		omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR);
 		omap_writel(~0x0, OMAP_IH2_2_MIR);
 		omap_writel(~0x0, OMAP_IH2_3_MIR);
@@ -185,7 +196,17 @@ void omap_pm_suspend(void)
  	 * Save interrupt, MPUI, ARM and UPLD control registers.
 	 */
 
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap730()) {
+		MPUI730_SAVE(OMAP_IH1_MIR);
+		MPUI730_SAVE(OMAP_IH2_0_MIR);
+		MPUI730_SAVE(OMAP_IH2_1_MIR);
+		MPUI730_SAVE(MPUI_CTRL);
+		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI730_SAVE(EMIFS_CONFIG);
+		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+
+	} else if (cpu_is_omap1510()) {
 		MPUI1510_SAVE(OMAP_IH1_MIR);
 		MPUI1510_SAVE(OMAP_IH2_MIR);
 		MPUI1510_SAVE(MPUI_CTRL);
@@ -280,7 +301,13 @@ void omap_pm_suspend(void)
 	ULPD_RESTORE(ULPD_CLOCK_CTRL);
 	ULPD_RESTORE(ULPD_STATUS_REQ);
 
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap730()) {
+		MPUI730_RESTORE(EMIFS_CONFIG);
+		MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
+		MPUI730_RESTORE(OMAP_IH1_MIR);
+		MPUI730_RESTORE(OMAP_IH2_0_MIR);
+		MPUI730_RESTORE(OMAP_IH2_1_MIR);
+	} else if (cpu_is_omap1510()) {
 		MPUI1510_RESTORE(MPUI_CTRL);
 		MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
 		MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
@@ -355,7 +382,14 @@ static int omap_pm_read_proc(
 	ULPD_SAVE(ULPD_DPLL_CTRL);
 	ULPD_SAVE(ULPD_POWER_CTRL);
 
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap730()) {
+		MPUI730_SAVE(MPUI_CTRL);
+		MPUI730_SAVE(MPUI_DSP_STATUS);
+		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+		MPUI730_SAVE(EMIFS_CONFIG);
+	} else if (cpu_is_omap1510()) {
 		MPUI1510_SAVE(MPUI_CTRL);
 		MPUI1510_SAVE(MPUI_DSP_STATUS);
 		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
@@ -404,7 +438,21 @@ static int omap_pm_read_proc(
 		   ULPD_SHOW(ULPD_STATUS_REQ),
 		   ULPD_SHOW(ULPD_POWER_CTRL));
 
-		if (cpu_is_omap1510()) {
+		if (cpu_is_omap730()) {
+			my_buffer_offset += sprintf(my_base + my_buffer_offset,
+			   "MPUI730_CTRL_REG	     0x%-8x \n"
+			   "MPUI730_DSP_STATUS_REG:      0x%-8x \n"
+			   "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+	 "MPUI730_DSP_API_CONFIG_REG:  0x%-8x \n"
+	 "MPUI730_SDRAM_CONFIG_REG:    0x%-8x \n"
+	 "MPUI730_EMIFS_CONFIG_REG:    0x%-8x \n",
+	 MPUI730_SHOW(MPUI_CTRL),
+	 MPUI730_SHOW(MPUI_DSP_STATUS),
+	 MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
+	 MPUI730_SHOW(MPUI_DSP_API_CONFIG),
+	 MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
+	 MPUI730_SHOW(EMIFS_CONFIG));
+		} else if (cpu_is_omap1510()) {
 			my_buffer_offset += sprintf(my_base + my_buffer_offset,
 			   "MPUI1510_CTRL_REG             0x%-8x \n"
 			   "MPUI1510_DSP_STATUS_REG:      0x%-8x \n"
@@ -553,7 +601,12 @@ static int __init omap_pm_init(void)
 	 * These routines need to be in SRAM as that's the only
 	 * memory the MPU can see when it wakes up.
 	 */
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap730()) {
+		omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend,
+						omap730_idle_loop_suspend_sz);
+		omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
+	 omap730_cpu_suspend_sz);
+	} else if (cpu_is_omap1510()) {
 		omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
 						omap1510_idle_loop_suspend_sz);
 		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
@@ -572,7 +625,11 @@ static int __init omap_pm_init(void)
 
 	pm_idle = omap_pm_idle;
 
-	setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+	if (cpu_is_omap730())
+		setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
+	else if (cpu_is_omap16xx())
+		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+
 #if 0
 	/* --- BEGIN BOARD-DEPENDENT CODE --- */
 	/* Sleepx mask direction */
@@ -591,7 +648,9 @@ static int __init omap_pm_init(void)
 	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
 
 	/* Configure IDLECT3 */
-	if (cpu_is_omap16xx())
+	if (cpu_is_omap730())
+		omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
+	else if (cpu_is_omap16xx())
 		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
 
 	pm_set_ops(&omap_pm_ops);
@@ -600,8 +659,10 @@ static int __init omap_pm_init(void)
 	omap_pm_init_proc();
 #endif
 
-	/* configure LOW_PWR pin */
-	omap_cfg_reg(T20_1610_LOW_PWR);
+	if (cpu_is_omap16xx()) {
+		/* configure LOW_PWR pin */
+		omap_cfg_reg(T20_1610_LOW_PWR);
+	}
 
 	return 0;
 }
diff --git a/arch/arm/plat-omap/sleep.S b/arch/arm/plat-omap/sleep.S
index 9f745836f6aa..4cd7d292f854 100644
--- a/arch/arm/plat-omap/sleep.S
+++ b/arch/arm/plat-omap/sleep.S
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/plat-omap/sleep.S
  *
- * Low-level OMAP1510/1610 sleep/wakeUp support
+ * Low-level OMAP730/1510/1610 sleep/wakeUp support
  *
  * Initial SA1110 code:
  * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
@@ -52,7 +52,57 @@
  *       processor specific functions here.
  */
 
-#ifdef CONFIG_ARCH_OMAP1510
+#if defined(CONFIG_ARCH_OMAP730)
+ENTRY(omap730_idle_loop_suspend)
+
+	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
+
+	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
+	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
+
+	@ turn off clock domains
+	@ get ARM_IDLECT2 into r2
+	ldrh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+	mov	r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
+	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+
+	@ request ARM idle
+	@ get ARM_IDLECT1 into r1
+	ldrh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+	orr	r3, r1, #OMAP730_IDLE_LOOP_REQUEST & 0xffff
+	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	mov	r5, #IDLE_WAIT_CYCLES & 0xff
+	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
+l_730:	subs	r5, r5, #1
+	bne	l_730
+/*
+ * Let's wait for the next clock tick to wake us up.
+ */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c0, 4		@ wait for interrupt
+/*
+ * omap730_idle_loop_suspend()'s resume point.
+ *
+ * It will just start executing here, so we'll restore stuff from the
+ * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
+ */
+
+	@ restore ARM_IDLECT1 and ARM_IDLECT2 and return
+	@ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2
+	strh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+	strh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
+
+ENTRY(omap730_idle_loop_suspend_sz)
+	.word	. - omap730_idle_loop_suspend
+#endif /* CONFIG_ARCH_OMAP730 */
+
+#ifdef CONFIG_ARCH_OMAP15XX
 ENTRY(omap1510_idle_loop_suspend)
 
 	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
@@ -100,7 +150,7 @@ l_1510:	subs	r5, r5, #1
 
 ENTRY(omap1510_idle_loop_suspend_sz)
 	.word	. - omap1510_idle_loop_suspend
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 ENTRY(omap1610_idle_loop_suspend)
@@ -169,7 +219,86 @@ ENTRY(omap1610_idle_loop_suspend_sz)
  *
  */
 
-#ifdef CONFIG_ARCH_OMAP1510
+#if defined(CONFIG_ARCH_OMAP730)
+ENTRY(omap730_cpu_suspend)
+
+	@ save registers on stack
+	stmfd	sp!, {r0 - r12, lr}
+
+	@ Drain write cache
+	mov	r4, #0
+	mcr	p15, 0, r0, c7, c10, 4
+	nop
+
+	@ load base address of Traffic Controller
+	mov	r6, #TCMIF_ASM_BASE & 0xff000000
+	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
+	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
+
+	@ prepare to put SDRAM into self-refresh manually
+	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
+	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
+	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+
+	@ prepare to put EMIFS to Sleep
+	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
+	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
+	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
+
+	@ turn off clock domains
+	@ do not disable PERCK (0x04)
+	mov	r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
+	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+
+	@ request ARM idle
+	mov	r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff
+	orr	r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00
+	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	@ disable instruction cache
+	mrc	p15, 0, r9, c1, c0, 0
+	bic	r2, r9, #0x1000
+	mcr	p15, 0, r2, c1, c0, 0
+	nop
+
+/*
+ * Let's wait for the next wake up event to wake us up. r0 can't be
+ * used here because r0 holds ARM_IDLECT1
+ */
+	mov	r2, #0
+	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
+/*
+ * omap730_cpu_suspend()'s resume point.
+ *
+ * It will just start executing here, so we'll restore stuff from the
+ * stack.
+ */
+	@ re-enable Icache
+	mcr	p15, 0, r9, c1, c0, 0
+
+	@ reset the ARM_IDLECT1 and ARM_IDLECT2.
+	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	@ Restore EMIFF controls
+	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+	@ restore regs and return
+	ldmfd	sp!, {r0 - r12, pc}
+
+ENTRY(omap730_cpu_suspend_sz)
+	.word	. - omap730_cpu_suspend
+#endif /* CONFIG_ARCH_OMAP730 */
+
+#ifdef CONFIG_ARCH_OMAP15XX
 ENTRY(omap1510_cpu_suspend)
 
 	@ save registers on stack
@@ -241,7 +370,7 @@ l_1510_2:
 
 ENTRY(omap1510_cpu_suspend_sz)
 	.word	. - omap1510_cpu_suspend
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 ENTRY(omap1610_cpu_suspend)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 7ad69f14a3e7..792f66375830 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -20,10 +20,13 @@
 #include <asm/io.h>
 #include <asm/cacheflush.h>
 
-#include "sram.h"
+#include <asm/arch/sram.h>
+
+#define OMAP1_SRAM_PA		0x20000000
+#define OMAP1_SRAM_VA		0xd0000000
+#define OMAP2_SRAM_PA		0x40200000
+#define OMAP2_SRAM_VA		0xd0000000
 
-#define OMAP1_SRAM_BASE		0xd0000000
-#define OMAP1_SRAM_START	0x20000000
 #define SRAM_BOOTLOADER_SZ	0x80
 
 static unsigned long omap_sram_base;
@@ -31,37 +34,40 @@ static unsigned long omap_sram_size;
 static unsigned long omap_sram_ceil;
 
 /*
- * The amount of SRAM depends on the core type:
- * 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K
+ * The amount of SRAM depends on the core type.
  * Note that we cannot try to test for SRAM here because writes
  * to secure SRAM will hang the system. Also the SRAM is not
  * yet mapped at this point.
  */
 void __init omap_detect_sram(void)
 {
-	omap_sram_base = OMAP1_SRAM_BASE;
+	if (!cpu_is_omap24xx())
+		omap_sram_base = OMAP1_SRAM_VA;
+	else
+		omap_sram_base = OMAP2_SRAM_VA;
 
 	if (cpu_is_omap730())
-		omap_sram_size = 0x32000;
-	else if (cpu_is_omap1510())
-		omap_sram_size = 0x80000;
+		omap_sram_size = 0x32000;	/* 200K */
+	else if (cpu_is_omap15xx())
+		omap_sram_size = 0x30000;	/* 192K */
 	else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710())
-		omap_sram_size = 0x4000;
+		omap_sram_size = 0x4000;	/* 16K */
 	else if (cpu_is_omap1611())
-		omap_sram_size = 0x3e800;
+		omap_sram_size = 0x3e800;	/* 250K */
+	else if (cpu_is_omap2420())
+		omap_sram_size = 0xa0014;	/* 640K */
 	else {
 		printk(KERN_ERR "Could not detect SRAM size\n");
 		omap_sram_size = 0x4000;
 	}
 
-	printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size);
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
 }
 
 static struct map_desc omap_sram_io_desc[] __initdata = {
 	{	/* .length gets filled in at runtime */
-		.virtual	= OMAP1_SRAM_BASE,
-		.pfn		= __phys_to_pfn(OMAP1_SRAM_START),
+		.virtual	= OMAP1_SRAM_VA,
+		.pfn		= __phys_to_pfn(OMAP1_SRAM_PA),
 		.type		= MT_DEVICE
 	}
 };
@@ -76,10 +82,19 @@ void __init omap_map_sram(void)
 	if (omap_sram_size == 0)
 		return;
 
+	if (cpu_is_omap24xx()) {
+		omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
+		omap_sram_io_desc[0].pfn = __phys_to_pfn(OMAP2_SRAM_PA);
+	}
+
 	omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE;
 	omap_sram_io_desc[0].length *= PAGE_SIZE;
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
+	printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
+	       omap_sram_io_desc[0].pfn, omap_sram_io_desc[0].virtual,
+	       omap_sram_io_desc[0].length);
+
 	/*
 	 * Looks like we need to preserve some bootloader code at the
 	 * beginning of SRAM for jumping to flash for reboot to work...
@@ -88,16 +103,6 @@ void __init omap_map_sram(void)
 	       omap_sram_size - SRAM_BOOTLOADER_SZ);
 }
 
-static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl) = NULL;
-
-void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
-{
-	if (_omap_sram_reprogram_clock == NULL)
-		panic("Cannot use SRAM");
-
-	return _omap_sram_reprogram_clock(dpllctl, ckctl);
-}
-
 void * omap_sram_push(void * start, unsigned long size)
 {
 	if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
@@ -111,10 +116,94 @@ void * omap_sram_push(void * start, unsigned long size)
 	return (void *)omap_sram_ceil;
 }
 
-void __init omap_sram_init(void)
+static void omap_sram_error(void)
+{
+	panic("Uninitialized SRAM function\n");
+}
+
+#ifdef CONFIG_ARCH_OMAP1
+
+static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
+
+void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
+{
+	if (!_omap_sram_reprogram_clock)
+		omap_sram_error();
+
+	return _omap_sram_reprogram_clock(dpllctl, ckctl);
+}
+
+int __init omap1_sram_init(void)
 {
-	omap_detect_sram();
-	omap_map_sram();
 	_omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock,
 						    sram_reprogram_clock_sz);
+
+	return 0;
+}
+
+#else
+#define omap1_sram_init()	do {} while (0)
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2
+
+static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+			      u32 base_cs, u32 force_unlock);
+
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+		   u32 base_cs, u32 force_unlock)
+{
+	if (!_omap2_sram_ddr_init)
+		omap_sram_error();
+
+	return _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
+				    base_cs, force_unlock);
+}
+
+static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
+					  u32 mem_type);
+
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
+{
+	if (!_omap2_sram_reprogram_sdrc)
+		omap_sram_error();
+
+	return _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
+}
+
+static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
+{
+	if (!_omap2_set_prcm)
+		omap_sram_error();
+
+	return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
+}
+
+int __init omap2_sram_init(void)
+{
+	_omap2_sram_ddr_init = omap_sram_push(sram_ddr_init, sram_ddr_init_sz);
+
+	_omap2_sram_reprogram_sdrc = omap_sram_push(sram_reprogram_sdrc,
+						    sram_reprogram_sdrc_sz);
+	_omap2_set_prcm = omap_sram_push(sram_set_prcm, sram_set_prcm_sz);
+
+	return 0;
+}
+#else
+#define omap2_sram_init()	do {} while (0)
+#endif
+
+int __init omap_sram_init(void)
+{
+	omap_detect_sram();
+	omap_map_sram();
+
+	if (!cpu_is_omap24xx())
+		omap1_sram_init();
+	else
+		omap2_sram_init();
+
+	return 0;
 }
diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h
deleted file mode 100644
index 71984efa6ae8..000000000000
--- a/arch/arm/plat-omap/sram.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-extern void * omap_sram_push(void * start, unsigned long size);
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-/* Do not use these */
-extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long sram_reprogram_clock_sz;
-
-#endif
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 205e2d0b826d..00afc7a8c2ab 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -91,6 +91,8 @@ EXPORT_SYMBOL(otg_set_transceiver);
 
 /*-------------------------------------------------------------------------*/
 
+#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX)
+
 static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 {
 	u32	syscon1 = 0;
@@ -271,6 +273,8 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 	return syscon1 << 24;
 }
 
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 #if	defined(CONFIG_USB_GADGET_OMAP) || \
@@ -494,7 +498,7 @@ static inline void omap_otg_init(struct omap_usb_config *config) {}
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef	CONFIG_ARCH_OMAP1510
+#ifdef	CONFIG_ARCH_OMAP15XX
 
 #define ULPD_DPLL_CTRL_REG	__REG16(ULPD_DPLL_CTRL)
 #define DPLL_IOB		(1 << 13)
@@ -507,7 +511,6 @@ static inline void omap_otg_init(struct omap_usb_config *config) {}
 
 static void __init omap_1510_usb_init(struct omap_usb_config *config)
 {
-	int status;
 	unsigned int val;
 
 	omap_usb0_init(config->pins[0], is_usb0_device(config));
@@ -539,6 +542,8 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 
 #ifdef	CONFIG_USB_GADGET_OMAP
 	if (config->register_dev) {
+		int status;
+
 		udc_device.dev.platform_data = config;
 		status = platform_device_register(&udc_device);
 		if (status)
@@ -549,6 +554,8 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 
 #if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	if (config->register_host) {
+		int status;
+
 		ohci_device.dev.platform_data = config;
 		status = platform_device_register(&ohci_device);
 		if (status)
diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index 4867498f68e8..bd9a6996aee7 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -48,6 +48,12 @@ static void corgibl_send_intensity(int intensity)
 	corgibl_mach_set_intensity(intensity);
 
 	spin_unlock_irqrestore(&bl_lock, flags);
+
+ 	corgi_kick_batt = symbol_get(sharpsl_battery_kick);
+ 	if (corgi_kick_batt) {
+ 		corgi_kick_batt();
+ 		symbol_put(sharpsl_battery_kick);
+ 	}
 }
 
 static void corgibl_blank(int blank)
diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
index 55d85eea8c1a..cfb413c845f7 100644
--- a/include/asm-arm/arch-ixp4xx/hardware.h
+++ b/include/asm-arm/arch-ixp4xx/hardware.h
@@ -44,5 +44,6 @@ extern unsigned int processor_id;
 #include "ixdp425.h"
 #include "coyote.h"
 #include "prpmc1100.h"
+#include "nslu2.h"
 
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
index ca808281c7f9..2cf4930372bc 100644
--- a/include/asm-arm/arch-ixp4xx/irqs.h
+++ b/include/asm-arm/arch-ixp4xx/irqs.h
@@ -93,4 +93,11 @@
 #define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
 #define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
 
+/*
+ * NSLU2 board IRQs
+ */
+#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
+#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
+#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
+
 #endif
diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h
new file mode 100644
index 000000000000..b8b347a559c7
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/nslu2.h
@@ -0,0 +1,96 @@
+/*
+ * include/asm-arm/arch-ixp4xx/nslu2.h
+ *
+ * NSLU2 platform specific definitions
+ *
+ * Author: Mark Rakes <mrakes AT mac.com>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * based on ixdp425.h:
+ *	Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define NSLU2_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define NSLU2_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
+
+#define NSLU2_SDA_PIN		7
+#define NSLU2_SCL_PIN		6
+
+/*
+ * NSLU2 PCI IRQs
+ */
+#define NSLU2_PCI_MAX_DEV	3
+#define NSLU2_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define NSLU2_PCI_INTA_PIN	11
+#define NSLU2_PCI_INTB_PIN	10
+#define NSLU2_PCI_INTC_PIN	9
+#define NSLU2_PCI_INTD_PIN	8
+
+
+/* NSLU2 Timer */
+#define NSLU2_FREQ 66000000
+#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
+
+/* GPIO */
+
+#define NSLU2_GPIO0		0
+#define NSLU2_GPIO1		1
+#define NSLU2_GPIO2		2
+#define NSLU2_GPIO3		3
+#define NSLU2_GPIO4		4
+#define NSLU2_GPIO5		5
+#define NSLU2_GPIO6		6
+#define NSLU2_GPIO7		7
+#define NSLU2_GPIO8		8
+#define NSLU2_GPIO9		9
+#define NSLU2_GPIO10		10
+#define NSLU2_GPIO11		11
+#define NSLU2_GPIO12		12
+#define NSLU2_GPIO13		13
+#define NSLU2_GPIO14		14
+#define NSLU2_GPIO15		15
+
+/* Buttons */
+
+#define NSLU2_PB_GPIO		NSLU2_GPIO5
+#define NSLU2_PO_GPIO		NSLU2_GPIO8	/* power off */
+#define NSLU2_RB_GPIO		NSLU2_GPIO12
+
+#define NSLU2_PB_IRQ		IRQ_IXP4XX_GPIO5
+#define NSLU2_RB_IRQ		IRQ_IXP4XX_GPIO12
+
+#define NSLU2_PB_BM		(1L << NSLU2_PB_GPIO)
+#define NSLU2_PO_BM		(1L << NSLU2_PO_GPIO)
+#define NSLU2_RB_BM		(1L << NSLU2_RB_GPIO)
+
+/* Buzzer */
+
+#define NSLU2_GPIO_BUZZ		4
+#define NSLU2_BZ_BM		(1L << NSLU2_GPIO_BUZZ)
+/* LEDs */
+
+#define NSLU2_LED_RED		NSLU2_GPIO0
+#define NSLU2_LED_GRN		NSLU2_GPIO1
+
+#define NSLU2_LED_RED_BM	(1L << NSLU2_LED_RED)
+#define NSLU2_LED_GRN_BM	(1L << NSLU2_LED_GRN)
+
+#define NSLU2_LED_DISK1		NSLU2_GPIO2
+#define NSLU2_LED_DISK2		NSLU2_GPIO3
+
+#define NSLU2_LED_DISK1_BM	(1L << NSLU2_GPIO2)
+#define NSLU2_LED_DISK2_BM	(1L << NSLU2_GPIO3)
+
+
diff --git a/include/asm-arm/arch-omap/board-h4.h b/include/asm-arm/arch-omap/board-h4.h
index d64ee9211eed..33ea29a41654 100644
--- a/include/asm-arm/arch-omap/board-h4.h
+++ b/include/asm-arm/arch-omap/board-h4.h
@@ -34,5 +34,11 @@
 #define OMAP24XX_ETHR_START             0x08000300
 #define OMAP24XX_ETHR_GPIO_IRQ		92
 
+#define H4_CS0_BASE		     0x04000000
+
+#define H4_CS0_BASE		     0x04000000
+
+#define H4_CS0_BASE		     0x04000000
+
 #endif /*  __ASM_ARCH_OMAP_H4_H */
 
diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h
index 79574e0ed13d..b3cf33441f6e 100644
--- a/include/asm-arm/arch-omap/board-innovator.h
+++ b/include/asm-arm/arch-omap/board-innovator.h
@@ -26,7 +26,7 @@
 #ifndef __ASM_ARCH_OMAP_INNOVATOR_H
 #define __ASM_ARCH_OMAP_INNOVATOR_H
 
-#if defined (CONFIG_ARCH_OMAP1510)
+#if defined (CONFIG_ARCH_OMAP15XX)
 
 #ifndef OMAP_SDRAM_DEVICE
 #define OMAP_SDRAM_DEVICE			D256M_1X16_4B
@@ -44,7 +44,7 @@ void fpga_write(unsigned char val, int reg);
 unsigned char fpga_read(int reg);
 #endif
 
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
 
 #if defined (CONFIG_ARCH_OMAP16XX)
 
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
new file mode 100644
index 000000000000..740c297eb11c
--- /dev/null
+++ b/include/asm-arm/arch-omap/clock.h
@@ -0,0 +1,91 @@
+/*
+ *  linux/include/asm-arm/arch-omap/clock.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_CLOCK_H
+#define __ARCH_ARM_OMAP_CLOCK_H
+
+struct module;
+
+struct clk {
+	struct list_head	node;
+	struct module		*owner;
+	const char		*name;
+	struct clk		*parent;
+	unsigned long		rate;
+	__u32			flags;
+	void __iomem		*enable_reg;
+	__u8			enable_bit;
+	__u8			rate_offset;
+	__u8			src_offset;
+	__s8			usecount;
+	void			(*recalc)(struct clk *);
+	int			(*set_rate)(struct clk *, unsigned long);
+	long			(*round_rate)(struct clk *, unsigned long);
+	void			(*init)(struct clk *);
+	int			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+};
+
+struct clk_functions {
+	int		(*clk_enable)(struct clk *clk);
+	void		(*clk_disable)(struct clk *clk);
+	int		(*clk_use)(struct clk *clk);
+	void		(*clk_unuse)(struct clk *clk);
+	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
+	struct clk *	(*clk_get_parent)(struct clk *clk);
+	void		(*clk_allow_idle)(struct clk *clk);
+	void		(*clk_deny_idle)(struct clk *clk);
+};
+
+extern unsigned int mpurate;
+extern struct list_head clocks;
+extern spinlock_t clockfw_lock;
+
+extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void followparent_recalc(struct clk * clk);
+extern void clk_allow_idle(struct clk *clk);
+extern void clk_deny_idle(struct clk *clk);
+
+/* Clock flags */
+#define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
+#define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
+#define RATE_PROPAGATES		(1 << 2)	/* Program children too */
+#define VIRTUAL_CLOCK		(1 << 3)	/* Composite clock from table */
+#define ALWAYS_ENABLED		(1 << 4)	/* Clock cannot be disabled */
+#define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
+#define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
+#define CLOCK_IDLE_CONTROL	(1 << 7)
+#define CLOCK_NO_IDLE_PARENT	(1 << 8)
+#define DELAYED_APP		(1 << 9)	/* Delay application of clock */
+#define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
+#define CM_MPU_SEL1		(1 << 11)	/* Domain divider/source */
+#define CM_DSP_SEL1		(1 << 12)
+#define CM_GFX_SEL1		(1 << 13)
+#define CM_MODEM_SEL1		(1 << 14)
+#define CM_CORE_SEL1		(1 << 15)	/* Sets divider for many */
+#define CM_CORE_SEL2		(1 << 16)	/* sets parent for GPT */
+#define CM_WKUP_SEL1		(1 << 17)
+#define CM_PLL_SEL1		(1 << 18)
+#define CM_PLL_SEL2		(1 << 19)
+#define CM_SYSCLKOUT_SEL1	(1 << 20)
+#define CLOCK_IN_OMAP730	(1 << 21)
+#define CLOCK_IN_OMAP1510	(1 << 22)
+#define CLOCK_IN_OMAP16XX	(1 << 23)
+#define CLOCK_IN_OMAP242X	(1 << 24)
+#define CLOCK_IN_OMAP243X	(1 << 25)
+
+#endif
diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h
index 2a676b4f13b5..08d58abd8218 100644
--- a/include/asm-arm/arch-omap/common.h
+++ b/include/asm-arm/arch-omap/common.h
@@ -31,6 +31,6 @@ struct sys_timer;
 
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
-extern void omap_serial_init(int ports[]);
+extern void omap_serial_init(void);
 
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h
index 1119e2b53e72..ec7eb675d922 100644
--- a/include/asm-arm/arch-omap/cpu.h
+++ b/include/asm-arm/arch-omap/cpu.h
@@ -28,12 +28,7 @@
 
 extern unsigned int system_rev;
 
-#define OMAP_DIE_ID_0		0xfffe1800
-#define OMAP_DIE_ID_1		0xfffe1804
-#define OMAP_PRODUCTION_ID_0	0xfffe2000
-#define OMAP_PRODUCTION_ID_1	0xfffe2004
-#define OMAP32_ID_0		0xfffed400
-#define OMAP32_ID_1		0xfffed404
+#define omap2_cpu_rev()		((system_rev >> 8) & 0x0f)
 
 /*
  * Test if multicore OMAP support is needed
@@ -50,7 +45,7 @@ extern unsigned int system_rev;
 #  define OMAP_NAME omap730
 # endif
 #endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 # ifdef OMAP_NAME
 #  undef  MULTI_OMAP1
 #  define MULTI_OMAP1
@@ -79,9 +74,11 @@ extern unsigned int system_rev;
  * Macros to group OMAP into cpu classes.
  * These can be used in most places.
  * cpu_is_omap7xx():	True for OMAP730
- * cpu_is_omap15xx():	True for OMAP1510 and OMAP5910
+ * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
  * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx():	True for OMAP2420
+ * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x():	True for OMAP2430
  */
 #define GET_OMAP_CLASS	(system_rev & 0xff)
 
@@ -91,22 +88,35 @@ static inline int is_omap ##class (void)		\
 	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
 }
 
+#define GET_OMAP_SUBCLASS	((system_rev >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)			\
+static inline int is_omap ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
 IS_OMAP_CLASS(7xx, 0x07)
 IS_OMAP_CLASS(15xx, 0x15)
 IS_OMAP_CLASS(16xx, 0x16)
 IS_OMAP_CLASS(24xx, 0x24)
 
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+
 #define cpu_is_omap7xx()		0
 #define cpu_is_omap15xx()		0
 #define cpu_is_omap16xx()		0
 #define cpu_is_omap24xx()		0
+#define cpu_is_omap242x()		0
+#define cpu_is_omap243x()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
 #  undef  cpu_is_omap7xx
 #  define cpu_is_omap7xx()		is_omap7xx()
 # endif
-# if defined(CONFIG_ARCH_OMAP1510)
+# if defined(CONFIG_ARCH_OMAP15XX)
 #  undef  cpu_is_omap15xx
 #  define cpu_is_omap15xx()		is_omap15xx()
 # endif
@@ -119,7 +129,7 @@ IS_OMAP_CLASS(24xx, 0x24)
 #  undef  cpu_is_omap7xx
 #  define cpu_is_omap7xx()		1
 # endif
-# if defined(CONFIG_ARCH_OMAP1510)
+# if defined(CONFIG_ARCH_OMAP15XX)
 #  undef  cpu_is_omap15xx
 #  define cpu_is_omap15xx()		1
 # endif
@@ -129,13 +139,18 @@ IS_OMAP_CLASS(24xx, 0x24)
 # endif
 # if defined(CONFIG_ARCH_OMAP24XX)
 #  undef  cpu_is_omap24xx
+#  undef  cpu_is_omap242x
+#  undef  cpu_is_omap243x
 #  define cpu_is_omap24xx()		1
+#  define cpu_is_omap242x()		is_omap242x()
+#  define cpu_is_omap243x()		is_omap243x()
 # endif
 #endif
 
 /*
  * Macros to detect individual cpu types.
  * These are only rarely needed.
+ * cpu_is_omap330():	True for OMAP330
  * cpu_is_omap730():	True for OMAP730
  * cpu_is_omap1510():	True for OMAP1510
  * cpu_is_omap1610():	True for OMAP1610
@@ -144,6 +159,9 @@ IS_OMAP_CLASS(24xx, 0x24)
  * cpu_is_omap1621():	True for OMAP1621
  * cpu_is_omap1710():	True for OMAP1710
  * cpu_is_omap2420():	True for OMAP2420
+ * cpu_is_omap2422():	True for OMAP2422
+ * cpu_is_omap2423():	True for OMAP2423
+ * cpu_is_omap2430():	True for OMAP2430
  */
 #define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
 
@@ -153,6 +171,7 @@ static inline int is_omap ##type (void)			\
 	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
 }
 
+IS_OMAP_TYPE(310, 0x0310)
 IS_OMAP_TYPE(730, 0x0730)
 IS_OMAP_TYPE(1510, 0x1510)
 IS_OMAP_TYPE(1610, 0x1610)
@@ -161,7 +180,11 @@ IS_OMAP_TYPE(5912, 0x1611)
 IS_OMAP_TYPE(1621, 0x1621)
 IS_OMAP_TYPE(1710, 0x1710)
 IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
 
+#define cpu_is_omap310()		0
 #define cpu_is_omap730()		0
 #define cpu_is_omap1510()		0
 #define cpu_is_omap1610()		0
@@ -170,31 +193,33 @@ IS_OMAP_TYPE(2420, 0x2420)
 #define cpu_is_omap1621()		0
 #define cpu_is_omap1710()		0
 #define cpu_is_omap2420()		0
+#define cpu_is_omap2422()		0
+#define cpu_is_omap2423()		0
+#define cpu_is_omap2430()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
 #  undef  cpu_is_omap730
 #  define cpu_is_omap730()		is_omap730()
 # endif
-# if defined(CONFIG_ARCH_OMAP1510)
-#  undef  cpu_is_omap1510
-#  define cpu_is_omap1510()		is_omap1510()
-# endif
 #else
 # if defined(CONFIG_ARCH_OMAP730)
 #  undef  cpu_is_omap730
 #  define cpu_is_omap730()		1
 # endif
-# if defined(CONFIG_ARCH_OMAP1510)
-#  undef  cpu_is_omap1510
-#  define cpu_is_omap1510()		1
-# endif
 #endif
 
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 1611B/5912 and 1710.
+ * between 330 vs. 1510 and 1611B/5912 vs. 1710.
  */
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()		is_omap310()
+# define cpu_is_omap1510()		is_omap1510()
+#endif
+
 #if defined(CONFIG_ARCH_OMAP16XX)
 # undef  cpu_is_omap1610
 # undef  cpu_is_omap1611
@@ -208,9 +233,20 @@ IS_OMAP_TYPE(2420, 0x2420)
 # define cpu_is_omap1710()		is_omap1710()
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2420)
-#  undef  cpu_is_omap2420
-#  define cpu_is_omap2420()		1
+#if defined(CONFIG_ARCH_OMAP24XX)
+# undef  cpu_is_omap2420
+# undef  cpu_is_omap2422
+# undef  cpu_is_omap2423
+# undef  cpu_is_omap2430
+# define cpu_is_omap2420()		is_omap2420()
+# define cpu_is_omap2422()		is_omap2422()
+# define cpu_is_omap2423()		is_omap2423()
+# define cpu_is_omap2430()		is_omap2430()
 #endif
 
+/* Macros to detect if we have OMAP1 or OMAP2 */
+#define cpu_class_is_omap1()	(cpu_is_omap730() || cpu_is_omap15xx() || \
+				cpu_is_omap16xx())
+#define cpu_class_is_omap2()	cpu_is_omap24xx()
+
 #endif
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
index 04ebef5c6e95..ccbcb580a5c1 100644
--- a/include/asm-arm/arch-omap/dma.h
+++ b/include/asm-arm/arch-omap/dma.h
@@ -22,9 +22,109 @@
 #define __ASM_ARCH_DMA_H
 
 #define MAX_DMA_ADDRESS			0xffffffff
+#define MAX_DMA_CHANNELS		0
+
+/* Hardware registers for omap1 */
+#define OMAP_DMA_BASE			(0xfffed800)
+#define OMAP_DMA_GCR			(OMAP_DMA_BASE + 0x400)
+#define OMAP_DMA_GSCR			(OMAP_DMA_BASE + 0x404)
+#define OMAP_DMA_GRST			(OMAP_DMA_BASE + 0x408)
+#define OMAP_DMA_HW_ID			(OMAP_DMA_BASE + 0x442)
+#define OMAP_DMA_PCH2_ID		(OMAP_DMA_BASE + 0x444)
+#define OMAP_DMA_PCH0_ID		(OMAP_DMA_BASE + 0x446)
+#define OMAP_DMA_PCH1_ID		(OMAP_DMA_BASE + 0x448)
+#define OMAP_DMA_PCHG_ID		(OMAP_DMA_BASE + 0x44a)
+#define OMAP_DMA_PCHD_ID		(OMAP_DMA_BASE + 0x44c)
+#define OMAP_DMA_CAPS_0_U		(OMAP_DMA_BASE + 0x44e)
+#define OMAP_DMA_CAPS_0_L		(OMAP_DMA_BASE + 0x450)
+#define OMAP_DMA_CAPS_1_U		(OMAP_DMA_BASE + 0x452)
+#define OMAP_DMA_CAPS_1_L		(OMAP_DMA_BASE + 0x454)
+#define OMAP_DMA_CAPS_2			(OMAP_DMA_BASE + 0x456)
+#define OMAP_DMA_CAPS_3			(OMAP_DMA_BASE + 0x458)
+#define OMAP_DMA_CAPS_4			(OMAP_DMA_BASE + 0x45a)
+#define OMAP_DMA_PCH2_SR		(OMAP_DMA_BASE + 0x460)
+#define OMAP_DMA_PCH0_SR		(OMAP_DMA_BASE + 0x480)
+#define OMAP_DMA_PCH1_SR		(OMAP_DMA_BASE + 0x482)
+#define OMAP_DMA_PCHD_SR		(OMAP_DMA_BASE + 0x4c0)
+
+/* Hardware registers for omap2 */
+#define OMAP24XX_DMA_BASE		(L4_24XX_BASE + 0x56000)
+#define OMAP_DMA4_REVISION		(OMAP24XX_DMA_BASE + 0x00)
+#define OMAP_DMA4_GCR_REG		(OMAP24XX_DMA_BASE + 0x78)
+#define OMAP_DMA4_IRQSTATUS_L0		(OMAP24XX_DMA_BASE + 0x08)
+#define OMAP_DMA4_IRQSTATUS_L1		(OMAP24XX_DMA_BASE + 0x0c)
+#define OMAP_DMA4_IRQSTATUS_L2		(OMAP24XX_DMA_BASE + 0x10)
+#define OMAP_DMA4_IRQSTATUS_L3		(OMAP24XX_DMA_BASE + 0x14)
+#define OMAP_DMA4_IRQENABLE_L0		(OMAP24XX_DMA_BASE + 0x18)
+#define OMAP_DMA4_IRQENABLE_L1		(OMAP24XX_DMA_BASE + 0x1c)
+#define OMAP_DMA4_IRQENABLE_L2		(OMAP24XX_DMA_BASE + 0x20)
+#define OMAP_DMA4_IRQENABLE_L3		(OMAP24XX_DMA_BASE + 0x24)
+#define OMAP_DMA4_SYSSTATUS		(OMAP24XX_DMA_BASE + 0x28)
+#define OMAP_DMA4_CAPS_0		(OMAP24XX_DMA_BASE + 0x64)
+#define OMAP_DMA4_CAPS_2		(OMAP24XX_DMA_BASE + 0x6c)
+#define OMAP_DMA4_CAPS_3		(OMAP24XX_DMA_BASE + 0x70)
+#define OMAP_DMA4_CAPS_4		(OMAP24XX_DMA_BASE + 0x74)
+
+#ifdef CONFIG_ARCH_OMAP1
 
 #define OMAP_LOGICAL_DMA_CH_COUNT	17
 
+/* Common channel specific registers for omap1 */
+#define OMAP_DMA_CSDP_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x00)
+#define OMAP_DMA_CCR_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x02)
+#define OMAP_DMA_CICR_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x04)
+#define OMAP_DMA_CSR_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x06)
+#define OMAP_DMA_CEN_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x10)
+#define OMAP_DMA_CFN_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x12)
+#define OMAP_DMA_CSFI_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x14)
+#define OMAP_DMA_CSEI_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x16)
+#define OMAP_DMA_CSAC_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x18)
+#define OMAP_DMA_CDAC_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1a)
+#define OMAP_DMA_CDEI_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1c)
+#define OMAP_DMA_CDFI_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1e)
+#define OMAP_DMA_CLNK_CTRL_REG(n)	__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x28)
+
+#else
+
+#define OMAP_LOGICAL_DMA_CH_COUNT	32	/* REVISIT: Is this 32 + 2? */
+
+/* Common channel specific registers for omap2 */
+#define OMAP_DMA_CCR_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x80)
+#define OMAP_DMA_CLNK_CTRL_REG(n)	__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x84)
+#define OMAP_DMA_CICR_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x88)
+#define OMAP_DMA_CSR_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x8c)
+#define OMAP_DMA_CSDP_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x90)
+#define OMAP_DMA_CEN_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x94)
+#define OMAP_DMA_CFN_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x98)
+#define OMAP_DMA_CSEI_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa4)
+#define OMAP_DMA_CSFI_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa8)
+#define OMAP_DMA_CDEI_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xac)
+#define OMAP_DMA_CDFI_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb0)
+#define OMAP_DMA_CSAC_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb4)
+#define OMAP_DMA_CDAC_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb8)
+
+#endif
+
+/* Channel specific registers only on omap1 */
+#define OMAP1_DMA_CSSA_L_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x08)
+#define OMAP1_DMA_CSSA_U_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0a)
+#define OMAP1_DMA_CDSA_L_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0c)
+#define OMAP1_DMA_CDSA_U_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0e)
+#define OMAP1_DMA_COLOR_L_REG(n)	__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x20)
+#define OMAP1_DMA_CCR2_REG(n)		__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x24)
+#define OMAP1_DMA_COLOR_U_REG(n)	__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x22)
+#define OMAP1_DMA_LCH_CTRL_REG(n)	__REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x2a)
+
+/* Channel specific registers only on omap2 */
+#define OMAP2_DMA_CSSA_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x9c)
+#define OMAP2_DMA_CDSA_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa0)
+#define OMAP2_DMA_CCEN_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xbc)
+#define OMAP2_DMA_CCFN_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xc0)
+#define OMAP2_DMA_COLOR_REG(n)		__REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xc4)
+
+/*----------------------------------------------------------------------------*/
+
+/* DMA channels for omap1 */
 #define OMAP_DMA_NO_DEVICE		0
 #define OMAP_DMA_MCSI1_TX		1
 #define OMAP_DMA_MCSI1_RX		2
@@ -85,29 +185,72 @@
 #define OMAP_DMA_MMC2_RX		55
 #define OMAP_DMA_CRYPTO_DES_OUT		56
 
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE		0
+#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_NDMA_REQ0	2	/* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_NDMA_REQ1	3	/* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
+#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
+#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
+#define OMAP24XX_DMA_VLYNQ_TX		7	/* S_DMA_6 */
+#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
 
-#define OMAP_DMA_BASE			(0xfffed800)
-#define OMAP_DMA_GCR			(OMAP_DMA_BASE + 0x400)
-#define OMAP_DMA_GSCR			(OMAP_DMA_BASE + 0x404)
-#define OMAP_DMA_GRST			(OMAP_DMA_BASE + 0x408)
-#define OMAP_DMA_HW_ID			(OMAP_DMA_BASE + 0x442)
-#define OMAP_DMA_PCH2_ID		(OMAP_DMA_BASE + 0x444)
-#define OMAP_DMA_PCH0_ID		(OMAP_DMA_BASE + 0x446)
-#define OMAP_DMA_PCH1_ID		(OMAP_DMA_BASE + 0x448)
-#define OMAP_DMA_PCHG_ID		(OMAP_DMA_BASE + 0x44a)
-#define OMAP_DMA_PCHD_ID		(OMAP_DMA_BASE + 0x44c)
-#define OMAP_DMA_CAPS_0_U		(OMAP_DMA_BASE + 0x44e)
-#define OMAP_DMA_CAPS_0_L		(OMAP_DMA_BASE + 0x450)
-#define OMAP_DMA_CAPS_1_U		(OMAP_DMA_BASE + 0x452)
-#define OMAP_DMA_CAPS_1_L		(OMAP_DMA_BASE + 0x454)
-#define OMAP_DMA_CAPS_2			(OMAP_DMA_BASE + 0x456)
-#define OMAP_DMA_CAPS_3			(OMAP_DMA_BASE + 0x458)
-#define OMAP_DMA_CAPS_4			(OMAP_DMA_BASE + 0x45a)
-#define OMAP_DMA_PCH2_SR		(OMAP_DMA_BASE + 0x460)
-#define OMAP_DMA_PCH0_SR		(OMAP_DMA_BASE + 0x480)
-#define OMAP_DMA_PCH1_SR		(OMAP_DMA_BASE + 0x482)
-#define OMAP_DMA_PCHD_SR		(OMAP_DMA_BASE + 0x4c0)
+#define OMAP24XX_DMA_EAC_AC_RD		17	/* S_DMA_16 */
+#define OMAP24XX_DMA_EAC_AC_WR		18	/* S_DMA_17 */
+#define OMAP24XX_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
+#define OMAP24XX_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
+#define OMAP24XX_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
+#define OMAP24XX_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
+#define OMAP24XX_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
+#define OMAP24XX_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
+#define OMAP24XX_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
+#define OMAP24XX_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX		31	/* SDMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX		32	/* SDMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX		33	/* SDMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX		34	/* SDMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0		35	/* SDMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0		36	/* SDMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1		37	/* SDMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1		38	/* SDMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2		39	/* SDMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2		40	/* SDMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3		41	/* SDMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3		42	/* SDMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0		43	/* SDMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0		44	/* SDMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1		45	/* SDMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1		46	/* SDMA_45 */
 
+#define OMAP24XX_DMA_UART1_TX		49	/* SDMA_48 */
+#define OMAP24XX_DMA_UART1_RX		50	/* SDMA_49 */
+#define OMAP24XX_DMA_UART2_TX		51	/* SDMA_50 */
+#define OMAP24XX_DMA_UART2_RX		52	/* SDMA_51 */
+#define OMAP24XX_DMA_UART3_TX		53	/* SDMA_52 */
+#define OMAP24XX_DMA_UART3_RX		54	/* SDMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* SDMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* SDMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* SDMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* SDMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* SDMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* SDMA_59 */
+#define OMAP24XX_DMA_MMC1_TX		61	/* SDMA_60 */
+#define OMAP24XX_DMA_MMC1_RX		62	/* SDMA_61 */
+#define OMAP24XX_DMA_MS			63	/* SDMA_62 */
+
+/*----------------------------------------------------------------------------*/
+
+/* Hardware registers for LCD DMA */
 #define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
 #define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
 #define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
@@ -116,7 +259,7 @@
 #define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
 
 #define OMAP1610_DMA_LCD_BASE		(0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP      	(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
 #define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
 #define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
 #define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
@@ -134,37 +277,18 @@
 #define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
 #define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
 
-
-/* Every LCh has its own set of the registers below */
-#define OMAP_DMA_CSDP(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x00)
-#define OMAP_DMA_CCR(n)			(OMAP_DMA_BASE + 0x40 * (n) + 0x02)
-#define OMAP_DMA_CICR(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x04)
-#define OMAP_DMA_CSR(n)			(OMAP_DMA_BASE + 0x40 * (n) + 0x06)
-#define OMAP_DMA_CSSA_L(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x08)
-#define OMAP_DMA_CSSA_U(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x0a)
-#define OMAP_DMA_CDSA_L(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x0c)
-#define OMAP_DMA_CDSA_U(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x0e)
-#define OMAP_DMA_CEN(n)			(OMAP_DMA_BASE + 0x40 * (n) + 0x10)
-#define OMAP_DMA_CFN(n)			(OMAP_DMA_BASE + 0x40 * (n) + 0x12)
-#define OMAP_DMA_CSFI(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x14)
-#define OMAP_DMA_CSEI(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x16)
-#define OMAP_DMA_CSAC(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x18)
-#define OMAP_DMA_CDAC(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x1a)
-#define OMAP_DMA_CDEI(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x1c)
-#define OMAP_DMA_CDFI(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x1e)
-#define OMAP_DMA_COLOR_L(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x20)
-#define OMAP_DMA_COLOR_U(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x22)
-#define OMAP_DMA_CCR2(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x24)
-#define OMAP_DMA_CLNK_CTRL(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x28)
-#define OMAP_DMA_LCH_CTRL(n)		(OMAP_DMA_BASE + 0x40 * (n) + 0x2a)
-
-#define OMAP_DMA_TOUT_IRQ		(1 << 0)
+#define OMAP_DMA_TOUT_IRQ		(1 << 0)	/* Only on omap1 */
 #define OMAP_DMA_DROP_IRQ		(1 << 1)
 #define OMAP_DMA_HALF_IRQ		(1 << 2)
 #define OMAP_DMA_FRAME_IRQ		(1 << 3)
 #define OMAP_DMA_LAST_IRQ		(1 << 4)
 #define OMAP_DMA_BLOCK_IRQ		(1 << 5)
-#define OMAP_DMA_SYNC_IRQ		(1 << 6)
+#define OMAP1_DMA_SYNC_IRQ		(1 << 6)
+#define OMAP2_DMA_PKT_IRQ		(1 << 7)
+#define OMAP2_DMA_TRANS_ERR_IRQ		(1 << 8)
+#define OMAP2_DMA_SECURE_ERR_IRQ	(1 << 9)
+#define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
+#define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
 
 #define OMAP_DMA_DATA_TYPE_S8		0x00
 #define OMAP_DMA_DATA_TYPE_S16		0x01
@@ -194,6 +318,7 @@ enum {
 	OMAP_LCD_DMA_B2_BOTTOM
 };
 
+/* REVISIT: Check if BURST_4 is really 1 (or 2) */
 enum omap_dma_burst_mode {
 	OMAP_DMA_DATA_BURST_DIS = 0,
 	OMAP_DMA_DATA_BURST_4,
@@ -206,6 +331,31 @@ enum omap_dma_color_mode {
 	OMAP_DMA_TRANSPARENT_COPY
 };
 
+struct omap_dma_channel_params {
+	int data_type;		/* data type 8,16,32 */
+	int elem_count;		/* number of elements in a frame */
+	int frame_count;	/* number of frames in a element */
+
+	int src_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int src_amode;		/* constant , post increment, indexed , double indexed */
+	int src_start;		/* source address : physical */
+	int src_ei;		/* source element index */
+	int src_fi;		/* source frame index */
+
+	int dst_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int dst_amode;		/* constant , post increment, indexed , double indexed */
+	int dst_start;		/* source address : physical */
+	int dst_ei;		/* source element index */
+	int dst_fi;		/* source frame index */
+
+	int trigger;		/* trigger attached if the channel is synchronized */
+	int sync_mode;		/* sycn on element, frame , block or packet */
+	int src_or_dst_synch;	/* source synch(1) or destination synch(0) */
+
+	int ie;			/* interrupt enabled */
+};
+
+
 extern void omap_set_dma_priority(int dst_port, int priority);
 extern int omap_request_dma(int dev_id, const char *dev_name,
 			    void (* callback)(int lch, u16 ch_status, void *data),
@@ -217,24 +367,30 @@ extern void omap_start_dma(int lch);
 extern void omap_stop_dma(int lch);
 extern void omap_set_dma_transfer_params(int lch, int data_type,
 					 int elem_count, int frame_count,
-					 int sync_mode);
+					 int sync_mode,
+					 int dma_trigger, int src_or_dst_synch);
 extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
 				    u32 color);
 
 extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
-				    unsigned long src_start);
+				    unsigned long src_start,
+				    int src_ei, int src_fi);
 extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
 extern void omap_set_dma_src_data_pack(int lch, int enable);
 extern void omap_set_dma_src_burst_mode(int lch,
 					enum omap_dma_burst_mode burst_mode);
 
 extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
-				     unsigned long dest_start);
+				     unsigned long dest_start,
+				     int dst_ei, int dst_fi);
 extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
 extern void omap_set_dma_dest_data_pack(int lch, int enable);
 extern void omap_set_dma_dest_burst_mode(int lch,
 					 enum omap_dma_burst_mode burst_mode);
 
+extern void omap_set_dma_params(int lch,
+				struct omap_dma_channel_params * params);
+
 extern void omap_dma_link_lch (int lch_head, int lch_queue);
 extern void omap_dma_unlink_lch (int lch_head, int lch_queue);
 
@@ -244,9 +400,6 @@ extern int omap_get_dma_src_addr_counter(int lch);
 extern void omap_clear_dma(int lch);
 extern int omap_dma_running(void);
 
-/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
-extern int omap_dma_in_1510_mode(void);
-
 /* LCD DMA functions */
 extern int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
 				void *data);
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
index 0d29b9c56a95..f8814a84910e 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -10,6 +10,20 @@
 
 #if defined(CONFIG_ARCH_OMAP1)
 
+#if defined(CONFIG_ARCH_OMAP730) && \
+	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP730 doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730)
+#define INT_IH2_IRQ		INT_730_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ		INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#endif
+
  		.macro	disable_fiq
 		.endm
 
diff --git a/include/asm-arm/arch-omap/fpga.h b/include/asm-arm/arch-omap/fpga.h
index 676807dc50e1..6a883e0bdbb8 100644
--- a/include/asm-arm/arch-omap/fpga.h
+++ b/include/asm-arm/arch-omap/fpga.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_OMAP_FPGA_H
 #define __ASM_ARCH_OMAP_FPGA_H
 
-#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP1510)
+#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
 extern void omap1510_fpga_init_irq(void);
 #else
 #define omap1510_fpga_init_irq()	(0)
@@ -77,6 +77,8 @@ struct h2p2_dbg_fpga {
 #define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
 #define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
 
+#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
 
 /*
  * ---------------------------------------------------------------------------
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
index 74cb2b93b700..1b3885741ac1 100644
--- a/include/asm-arm/arch-omap/gpio.h
+++ b/include/asm-arm/arch-omap/gpio.h
@@ -67,7 +67,7 @@
 
 #define OMAP_GPIO_IRQ(nr)	(OMAP_GPIO_IS_MPUIO(nr) ? \
 				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
-				 IH_GPIO_BASE + ((nr) & 0x3f))
+				 IH_GPIO_BASE + (nr))
 
 extern int omap_gpio_init(void);	/* Call from board init only */
 extern int omap_request_gpio(int gpio);
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index 60201e1dd6ad..5406b875c422 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -267,8 +267,6 @@
 #define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
 #define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
 
-#ifndef __ASSEMBLER__
-
 /*
  * ---------------------------------------------------------------------------
  * Processor specific defines
@@ -277,13 +275,11 @@
 
 #include "omap730.h"
 #include "omap1510.h"
-
-#ifdef CONFIG_ARCH_OMAP24XX
 #include "omap24xx.h"
-#endif
-
 #include "omap16xx.h"
 
+#ifndef __ASSEMBLER__
+
 /*
  * ---------------------------------------------------------------------------
  * Board specific defines
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 3d5bcd545082..f5bcc9a1aed6 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -52,23 +52,33 @@
  * ----------------------------------------------------------------------------
  */
 
+#define PCIO_BASE	0
+
 #if defined(CONFIG_ARCH_OMAP1)
+
 #define IO_PHYS		0xFFFB0000
-#define IO_OFFSET      -0x01000000	/* Virtual IO = 0xfefb0000 */
+#define IO_OFFSET	0x01000000	/* Virtual IO = 0xfefb0000 */
 #define IO_SIZE		0x40000
+#define IO_VIRT		(IO_PHYS - IO_OFFSET)
+#define IO_ADDRESS(pa)	((pa) - IO_OFFSET)
+#define io_p2v(pa)	((pa) - IO_OFFSET)
+#define io_v2p(va)	((va) + IO_OFFSET)
 
 #elif defined(CONFIG_ARCH_OMAP2)
-#define IO_PHYS		0x48000000	/* L4 peripherals; other stuff has to be mapped *
-					 * manually. */
-#define IO_OFFSET	0x90000000	/* Virtual IO = 0xd8000000 */
-#define IO_SIZE		0x08000000
-#endif
 
-#define IO_VIRT		(IO_PHYS + IO_OFFSET)
-#define IO_ADDRESS(x)	((x) + IO_OFFSET)
-#define PCIO_BASE	0
-#define io_p2v(x)	((x) + IO_OFFSET)
-#define io_v2p(x)	((x) - IO_OFFSET)
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
+#define L3_24XX_VIRT	0xf8000000
+#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
+#define L4_24XX_VIRT	0xd8000000
+#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
+#define IO_OFFSET	0x90000000
+#define IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_p2v(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
+
+#endif
 
 #ifndef __ASSEMBLER__
 
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
index 74e108ccac16..9779686bdceb 100644
--- a/include/asm-arm/arch-omap/irqs.h
+++ b/include/asm-arm/arch-omap/irqs.h
@@ -22,8 +22,8 @@
  *	 are different.
  */
 
-#ifndef __ASM_ARCH_OMAP1510_IRQS_H
-#define __ASM_ARCH_OMAP1510_IRQS_H
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
 
 /*
  * IRQ numbers for interrupt handler 1
@@ -31,7 +31,6 @@
  * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
  *
  */
-#define INT_IH2_IRQ		0
 #define INT_CAMERA		1
 #define INT_FIQ			3
 #define INT_RTDX		6
@@ -60,6 +59,7 @@
 /*
  * OMAP-1510 specific IRQ numbers for interrupt handler 1
  */
+#define INT_1510_IH2_IRQ	0
 #define INT_1510_RES2		2
 #define INT_1510_SPI_TX		4
 #define INT_1510_SPI_RX		5
@@ -71,6 +71,7 @@
 /*
  * OMAP-1610 specific IRQ numbers for interrupt handler 1
  */
+#define INT_1610_IH2_IRQ	0
 #define INT_1610_IH2_FIQ	2
 #define INT_1610_McBSP2_TX	4
 #define INT_1610_McBSP2_RX	5
@@ -231,6 +232,12 @@
 #define INT_730_DMA_CH15	(62 + IH2_BASE)
 #define INT_730_NAND		(63 + IH2_BASE)
 
+#define INT_24XX_SYS_NIRQ	7
+#define INT_24XX_SDMA_IRQ0	12
+#define INT_24XX_SDMA_IRQ1	13
+#define INT_24XX_SDMA_IRQ2	14
+#define INT_24XX_SDMA_IRQ3	15
+#define INT_24XX_DSS_IRQ	25
 #define INT_24XX_GPIO_BANK1	29
 #define INT_24XX_GPIO_BANK2	30
 #define INT_24XX_GPIO_BANK3	31
diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h
index bf545b6e0a26..df50dd53e1dd 100644
--- a/include/asm-arm/arch-omap/memory.h
+++ b/include/asm-arm/arch-omap/memory.h
@@ -61,7 +61,7 @@
  * Note that the is_lbus_device() test is not very efficient on 1510
  * because of the strncmp().
  */
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 
 /*
  * OMAP-1510 Local Bus address offset
@@ -84,7 +84,7 @@
 					virt_to_lbus(addr) : \
 					__virt_to_bus(addr);})
 
-#endif	/* CONFIG_ARCH_OMAP1510 */
+#endif	/* CONFIG_ARCH_OMAP15XX */
 
 #endif
 
diff --git a/include/asm-arm/arch-omap/menelaus.h b/include/asm-arm/arch-omap/menelaus.h
new file mode 100644
index 000000000000..46be8b8d6346
--- /dev/null
+++ b/include/asm-arm/arch-omap/menelaus.h
@@ -0,0 +1,22 @@
+/*
+ * linux/include/asm-arm/arch-omap/menelaus.h
+ *
+ * Functions to access Menelaus power management chip
+ */
+
+#ifndef __ASM_ARCH_MENELAUS_H
+#define __ASM_ARCH_MENELAUS_H
+
+extern void menelaus_mmc_register(void (*callback)(u8 card_mask),
+				  unsigned long data);
+extern void menelaus_mmc_remove(void);
+extern void menelaus_mmc_opendrain(int enable);
+
+#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
+#define omap_has_menelaus()	1
+#else
+#define omap_has_menelaus()	0
+#endif
+
+#endif
+
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index 1b1ad4105349..13415a9aab06 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -4,7 +4,7 @@
  * Table of the Omap register configurations for the FUNC_MUX and
  * PULL_DWN combinations.
  *
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003 - 2005 Nokia Corporation
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
@@ -58,6 +58,16 @@
 					.pu_pd_reg = PU_PD_SEL_##reg, \
 					.pu_pd_val = status,
 
+#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
+					.mux_reg = OMAP730_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_730(reg, bit, status)	.pull_name = "OMAP730_IO_CONF_"#reg, \
+					.pull_reg = OMAP730_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
 #else
 
 #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
@@ -71,6 +81,15 @@
 #define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
 					.pu_pd_val = status,
 
+#define MUX_REG_730(reg, mode_offset, mode) \
+					.mux_reg = OMAP730_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_730(reg, bit, status)	.pull_reg = OMAP730_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
 #endif /* CONFIG_OMAP_MUX_DEBUG */
 
 #define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
@@ -84,13 +103,44 @@
 	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
 },
 
+
+/*
+ * OMAP730 has a slightly different config for the pin mux.
+ * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,	\
+		   pull_reg, pull_bit, pull_status,	\
+		   pu_pd_reg, pu_pd_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_730(mux_reg, mode_offset, mode)		\
+	PULL_REG_730(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+#define MUX_CFG_24XX(desc, reg_offset, mode,			\
+				pull_en, pull_mode, dbg)	\
+{								\
+	.name		= desc,					\
+	.debug		= dbg,					\
+	.mux_reg	= reg_offset,				\
+	.mask		= mode,					\
+	.pull_val	= pull_en,				\
+	.pu_pd_val	= pull_mode,				\
+},
+
+
 #define PULL_DISABLED	0
 #define PULL_ENABLED	1
 
 #define PULL_DOWN	0
 #define PULL_UP		1
 
-typedef struct {
+struct pin_config {
 	char *name;
 	unsigned char busy;
 	unsigned char debug;
@@ -108,13 +158,23 @@ typedef struct {
 	const char *pu_pd_name;
 	const unsigned int pu_pd_reg;
 	const unsigned char pu_pd_val;
-} reg_cfg_set;
+};
 
-/*
- * Lookup table for FUNC_MUX and PULL_DWN register combinations for each
- * device. See also reg_cfg_table below for the register values.
- */
-typedef enum {
+enum omap730_index {
+	/* OMAP 730 keyboard */
+	E2_730_KBR0,
+	J7_730_KBR1,
+	E1_730_KBR2,
+	F3_730_KBR3,
+	D2_730_KBR4,
+	C2_730_KBC0,
+	D3_730_KBC1,
+	E4_730_KBC2,
+	F4_730_KBC3,
+	E3_730_KBC4,
+};
+
+enum omap1xxx_index {
 	/* UART1 (BT_UART_GATING)*/
 	UART1_TX = 0,
 	UART1_RTS,
@@ -331,245 +391,34 @@ typedef enum {
 	V10_1610_CF_IREQ,
 	W10_1610_CF_RESET,
 	W11_1610_CF_CD1,
-} reg_cfg_t;
+};
 
-#if defined(__MUX_C__) && defined(CONFIG_OMAP_MUX)
+enum omap24xx_index {
+	/* 24xx I2C */
+	M19_24XX_I2C1_SCL,
+	L15_24XX_I2C1_SDA,
+	J15_24XX_I2C2_SCL,
+	H19_24XX_I2C2_SDA,
 
-/*
- * Table of various FUNC_MUX and PULL_DWN combinations for each device.
- * See also reg_cfg_t above for the lookup table.
- */
-static const reg_cfg_set __initdata_or_module
-reg_cfg_table[] = {
-/*
- *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
- *				reg  offset mode reg  bit   ena	  reg
- */
-MUX_CFG("UART1_TX",		 9,   21,    1,	  2,   3,   0,	 NA,	 0,  0)
-MUX_CFG("UART1_RTS",		 9,   12,    1,	  2,   0,   0,	 NA,	 0,  0)
-
-/* UART2 (COM_UART_GATING), conflicts with USB2 */
-MUX_CFG("UART2_TX",		 C,   27,    1,	  3,   3,   0,	 NA,	 0,  0)
-MUX_CFG("UART2_RX",		 C,   18,    0,	  3,   1,   1,	 NA,	 0,  0)
-MUX_CFG("UART2_CTS",		 C,   21,    0,	  3,   1,   1,	 NA,	 0,  0)
-MUX_CFG("UART2_RTS",		 C,   24,    1,	  3,   2,   0,	 NA,	 0,  0)
-
-/* UART3 (GIGA_UART_GATING) */
-MUX_CFG("UART3_TX",		 6,    0,    1,	  0,  30,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_RX",		 6,    3,    0,	  0,  31,   1,	 NA,	 0,  0)
-MUX_CFG("UART3_CTS",		 5,   12,    2,	  0,  24,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_RTS",		 5,   15,    2,	  0,  25,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_CLKREQ",		 9,   27,    0,	  2,   5,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_BCLK",		 A,    0,    0,	  2,   6,   0,	 NA,	 0,  0)
-MUX_CFG("Y15_1610_UART3_RTS",	 A,    0,    1,	  2,   6,   0,	 NA,	 0,  0)
-
-/* PWT & PWL, conflicts with UART3 */
-MUX_CFG("PWT",		 	 6,    0,    2,	  0,  30,   0,	 NA,	 0,  0)
-MUX_CFG("PWL",		 	 6,    3,    1,	  0,  31,   1,	 NA,	 0,  0)
-
-/* USB internal master generic */
-MUX_CFG("R18_USB_VBUS",		 7,    9,    2,	  1,  11,   0,	 NA,	 0,  1)
-MUX_CFG("R18_1510_USB_GPIO0",	 7,    9,    0,	  1,  11,   1,	 NA,	 0,  1)
-/* works around erratum:  W4_USB_PUEN and W4_USB_PUDIS are switched! */
-MUX_CFG("W4_USB_PUEN",		 D,    3,    3,	  3,   5,   1,	 NA,	 0,  1)
-MUX_CFG("W4_USB_CLKO",		 D,    3,    1,	  3,   5,   0,	 NA,	 0,  1)
-MUX_CFG("W4_USB_HIGHZ",		 D,    3,    4,	  3,   5,   0,	  3,	 0,  1)
-MUX_CFG("W4_GPIO58",		 D,    3,    7,	  3,   5,   0,	  3,	 0,  1)
-
-/* USB1 master */
-MUX_CFG("USB1_SUSP",		 8,   27,    2,	  1,  27,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_SE0",		 9,    0,    2,	  1,  28,   0,	 NA,	 0,  1)
-MUX_CFG("W13_1610_USB1_SE0",	 9,    0,    4,	  1,  28,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_TXEN",		 9,    3,    2,	  1,  29,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_TXD",		 9,   24,    1,	  2,   4,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_VP",		 A,    3,    1,	  2,   7,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_VM",		 A,    6,    1,	  2,   8,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_RCV",		 A,    9,    1,	  2,   9,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_SPEED",		 A,   12,    2,	  2,  10,   0,	 NA,	 0,  1)
-MUX_CFG("R13_1610_USB1_SPEED",	 A,   12,    5,	  2,  10,   0,	 NA,	 0,  1)
-MUX_CFG("R13_1710_USB1_SEO",	 A,   12,    5,   2,  10,   0,   NA,     0,  1)
-
-/* USB2 master */
-MUX_CFG("USB2_SUSP",		 B,    3,    1,	  2,  17,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_VP",		 B,    6,    1,	  2,  18,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_TXEN",		 B,    9,    1,	  2,  19,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_VM",		 C,   18,    1,	  3,   0,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_RCV",		 C,   21,    1,	  3,   1,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_SE0",		 C,   24,    2,	  3,   2,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_TXD",		 C,   27,    2,	  3,   3,   0,	 NA,	 0,  1)
-
-/* OMAP-1510 GPIO */
-MUX_CFG("R18_1510_GPIO0",	 7,    9,    0,   1,  11,   1,    0,     0,  1)
-MUX_CFG("R19_1510_GPIO1",	 7,    6,    0,   1,  10,   1,    0,     0,  1)
-MUX_CFG("M14_1510_GPIO2",	 7,    3,    0,   1,   9,   1,    0,     0,  1)
-
-/* OMAP1610 GPIO */
-MUX_CFG("P18_1610_GPIO3",	 7,    0,    0,   1,   8,   0,   NA,     0,  1)
-MUX_CFG("Y15_1610_GPIO17",	 A,    0,    7,   2,   6,   0,   NA,     0,  1)
-
-/* OMAP-1710 GPIO */
-MUX_CFG("R18_1710_GPIO0",        7,    9,    0,   1,  11,   1,    1,     1,  1)
-MUX_CFG("V2_1710_GPIO10",        F,   27,    1,   4,   3,   1,    4,     1,  1)
-MUX_CFG("N21_1710_GPIO14",       6,    9,    0,   1,   1,   1,    1,     1,  1)
-MUX_CFG("W15_1710_GPIO40",       9,   27,    7,   2,   5,   1,    2,     1,  1)
-
-/* MPUIO */
-MUX_CFG("MPUIO2",		 7,   18,    0,	  1,  14,   1,	 NA,	 0,  1)
-MUX_CFG("N15_1610_MPUIO2",	 7,   18,    0,	  1,  14,   1,	  1,	 0,  1)
-MUX_CFG("MPUIO4",		 7,   15,    0,	  1,  13,   1,	 NA,	 0,  1)
-MUX_CFG("MPUIO5",		 7,   12,    0,	  1,  12,   1,	 NA,	 0,  1)
-
-MUX_CFG("T20_1610_MPUIO5",	 7,   12,    0,	  1,  12,   0,	  3,	 0,  1)
-MUX_CFG("W11_1610_MPUIO6",	10,   15,    2,	  3,   8,   0,	  3,	 0,  1)
-MUX_CFG("V10_1610_MPUIO7",	 A,   24,    2,	  2,  14,   0,	  2,	 0,  1)
-MUX_CFG("W11_1610_MPUIO9",	10,   15,    1,	  3,   8,   0,	  3,	 0,  1)
-MUX_CFG("V10_1610_MPUIO10",	 A,   24,    1,	  2,  14,   0,	  2,	 0,  1)
-MUX_CFG("W10_1610_MPUIO11",	 A,   18,    2,	  2,  11,   0,	  2,	 0,  1)
-MUX_CFG("E20_1610_MPUIO13",	 3,   21,    1,	  0,   7,   0,	  0,	 0,  1)
-MUX_CFG("U20_1610_MPUIO14",	 9,    6,    6,	  0,  30,   0,	  0,	 0,  1)
-MUX_CFG("E19_1610_MPUIO15",	 3,   18,    1,	  0,   6,   0,	  0,	 0,  1)
-
-/* MCBSP2 */
-MUX_CFG("MCBSP2_CLKR",		 C,    6,    0,	  2,  27,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_CLKX",		 C,    9,    0,	  2,  29,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_DR",		 C,    0,    0,	  2,  26,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_DX",		 C,   15,    0,	  2,  31,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_FSR",		 C,   12,    0,	  2,  30,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_FSX",		 C,    3,    0,	  2,  27,   1,	 NA,	 0,  1)
-
-/* MCBSP3 NOTE: Mode must 1 for clock */
-MUX_CFG("MCBSP3_CLKX",		 9,    3,    1,	  1,  29,   0,	 NA,	 0,  1)
-
-/* Misc ballouts */
-MUX_CFG("BALLOUT_V8_ARMIO3",	 B,   18,    0,	  2,  25,   1,	 NA,	 0,  1)
-MUX_CFG("N20_HDQ",	       6,   18,    1,   1,   4,   0,    1,     4,  0)
-
-/* OMAP-1610 MMC2 */
-MUX_CFG("W8_1610_MMC2_DAT0",	 B,   21,    6,	  2,  23,   1,	  2,	 1,  1)
-MUX_CFG("V8_1610_MMC2_DAT1",	 B,   27,    6,	  2,  25,   1,	  2,	 1,  1)
-MUX_CFG("W15_1610_MMC2_DAT2",	 9,   12,    6,	  2,   5,   1,	  2,	 1,  1)
-MUX_CFG("R10_1610_MMC2_DAT3",	 B,   18,    6,	  2,  22,   1,	  2,	 1,  1)
-MUX_CFG("Y10_1610_MMC2_CLK",	 B,    3,    6,	  2,  17,   0,	  2,	 0,  1)
-MUX_CFG("Y8_1610_MMC2_CMD",	 B,   24,    6,	  2,  24,   1,	  2,	 1,  1)
-MUX_CFG("V9_1610_MMC2_CMDDIR",	 B,   12,    6,	  2,  20,   0,	  2,	 1,  1)
-MUX_CFG("V5_1610_MMC2_DATDIR0",	 B,   15,    6,	  2,  21,   0,	  2,	 1,  1)
-MUX_CFG("W19_1610_MMC2_DATDIR1", 8,   15,    6,	  1,  23,   0,	  1,	 1,  1)
-MUX_CFG("R18_1610_MMC2_CLKIN",	 7,    9,    6,	  1,  11,   0,	  1,	11,  1)
-
-/* OMAP-1610 External Trace Interface */
-MUX_CFG("M19_1610_ETM_PSTAT0",	 5,   27,    1,	  0,  29,   0,	  0,	 0,  1)
-MUX_CFG("L15_1610_ETM_PSTAT1",	 5,   24,    1,	  0,  28,   0,	  0,	 0,  1)
-MUX_CFG("L18_1610_ETM_PSTAT2",	 5,   21,    1,	  0,  27,   0,	  0,	 0,  1)
-MUX_CFG("L19_1610_ETM_D0",	 5,   18,    1,	  0,  26,   0,	  0,	 0,  1)
-MUX_CFG("J19_1610_ETM_D6",	 5,    0,    1,	  0,  20,   0,	  0,	 0,  1)
-MUX_CFG("J18_1610_ETM_D7",	 5,   27,    1,	  0,  19,   0,	  0,	 0,  1)
-
-/* OMAP16XX GPIO */
-MUX_CFG("P20_1610_GPIO4",	 6,   27,    0,	  1,   7,   0,	  1,	 1,  1)
-MUX_CFG("V9_1610_GPIO7",	 B,   12,    1,	  2,  20,   0,	  2,	 1,  1)
-MUX_CFG("W8_1610_GPIO9",	 B,   21,    0,	  2,  23,   0,	  2,	 1,  1)
-MUX_CFG("N20_1610_GPIO11",       6,   18,    0,   1,   4,   0,    1,     1,  1)
-MUX_CFG("N19_1610_GPIO13",	 6,   12,    0,	  1,   2,   0,	  1,	 1,  1)
-MUX_CFG("P10_1610_GPIO22",	 C,    0,    7,	  2,  26,   0,	  2,	 1,  1)
-MUX_CFG("V5_1610_GPIO24",	 B,   15,    7,	  2,  21,   0,	  2,	 1,  1)
-MUX_CFG("AA20_1610_GPIO_41",	 9,    9,    7,	  1,  31,   0,	  1,	 1,  1)
-MUX_CFG("W19_1610_GPIO48",	 8,   15,    7,   1,  23,   1,    1,     0,  1)
-MUX_CFG("M7_1610_GPIO62",	10,    0,    0,   4,  24,   0,    4,     0,  1)
-MUX_CFG("V14_16XX_GPIO37",	 9,   18,    7,	  2,   2,   0,	  2,	 2,  0)
-MUX_CFG("R9_16XX_GPIO18",	 C,   18,    7,   3,   0,   0,    3,     0,  0)
-MUX_CFG("L14_16XX_GPIO49",	 6,    3,    7,   0,  31,   0,    0,    31,  0)
-
-/* OMAP-1610 uWire */
-MUX_CFG("V19_1610_UWIRE_SCLK",	 8,    6,    0,	  1,  20,   0,	  1,	 1,  1)
-MUX_CFG("U18_1610_UWIRE_SDI",	 8,    0,    0,	  1,  18,   0,	  1,	 1,  1)
-MUX_CFG("W21_1610_UWIRE_SDO",	 8,    3,    0,	  1,  19,   0,	  1,	 1,  1)
-MUX_CFG("N14_1610_UWIRE_CS0",	 8,    9,    1,	  1,  21,   0,	  1,	 1,  1)
-MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
-MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)
-
-/* OMAP-1610 Flash */
-MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)
-
-/* First MMC interface, same on 1510, 1610 and 1710 */
-MUX_CFG("MMC_CMD",		 A,   27,    0,	  2,  15,   1,	  2,	 1,  1)
-MUX_CFG("MMC_DAT1",		 A,   24,    0,	  2,  14,   1,	  2,	 1,  1)
-MUX_CFG("MMC_DAT2",		 A,   18,    0,	  2,  12,   1,	  2,	 1,  1)
-MUX_CFG("MMC_DAT0",		 B,    0,    0,	  2,  16,   1,	  2,	 1,  1)
-MUX_CFG("MMC_CLK",		 A,   21,    0,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("MMC_DAT3",		10,   15,    0,	  3,   8,   1,	  3,	 1,  1)
-MUX_CFG("M15_1710_MMC_CLKI",	 6,   21,    2,   0,   0,   0,   NA,     0,  1)
-MUX_CFG("P19_1710_MMC_CMDDIR",	 6,   24,    6,   0,   0,   0,   NA,     0,  1)
-MUX_CFG("P20_1710_MMC_DATDIR0",	 6,   27,    5,   0,   0,   0,   NA,     0,  1)
-
-/* OMAP-1610 USB0 alternate configuration */
-MUX_CFG("W9_USB0_TXEN",		 B,   9,     5,	  2,  19,   0,	  2,	 0,  1)
-MUX_CFG("AA9_USB0_VP",		 B,   6,     5,	  2,  18,   0,	  2,	 0,  1)
-MUX_CFG("Y5_USB0_RCV",		 C,  21,     5,	  3,   1,   0,	  1,	 0,  1)
-MUX_CFG("R9_USB0_VM",		 C,  18,     5,	  3,   0,   0,	  3,	 0,  1)
-MUX_CFG("V6_USB0_TXD",		 C,  27,     5,	  3,   3,   0,	  3,	 0,  1)
-MUX_CFG("W5_USB0_SE0",		 C,  24,     5,	  3,   2,   0,	  3,	 0,  1)
-MUX_CFG("V9_USB0_SPEED",	 B,  12,     5,	  2,  20,   0,	  2,	 0,  1)
-MUX_CFG("Y10_USB0_SUSP",	 B,   3,     5,	  2,  17,   0,	  2,	 0,  1)
-
-/* USB2 interface */
-MUX_CFG("W9_USB2_TXEN",		 B,   9,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("AA9_USB2_VP",		 B,   6,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("Y5_USB2_RCV",		 C,  21,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("R9_USB2_VM",		 C,  18,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("V6_USB2_TXD",		 C,  27,     2,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("W5_USB2_SE0",		 C,  24,     2,	 NA,   0,   0,	 NA,	 0,  1)
-
-/* 16XX UART */
-MUX_CFG("R13_1610_UART1_TX",	 A,  12,     6,	  2,  10,   0,	  2,	10,  1)
-MUX_CFG("V14_16XX_UART1_RX",	 9,  18,     0,	  2,   2,   0,	  2,	 2,  1)
-MUX_CFG("R14_1610_UART1_CTS",	 9,  15,     0,	  2,   1,   0,	  2,	 1,  1)
-MUX_CFG("AA15_1610_UART1_RTS",	 9,  12,     1,	  2,   0,   0,	  2,	 0,  1)
-MUX_CFG("R9_16XX_UART2_RX",	 C,  18,     0,   3,   0,   0,    3,     0,  1)
-MUX_CFG("L14_16XX_UART3_RX",	 6,   3,     0,   0,  31,   0,    0,    31,  1)
-
-/* I2C interface */
-MUX_CFG("I2C_SCL",		 7,  24,     0,	 NA,   0,   0,	 NA,	 0,  0)
-MUX_CFG("I2C_SDA",		 7,  27,     0,	 NA,   0,   0,	 NA,	 0,  0)
-
-/* Keypad */
-MUX_CFG("F18_1610_KBC0",	 3,  15,     0,	  0,   5,   1,	  0,	 0,  0)
-MUX_CFG("D20_1610_KBC1",	 3,  12,     0,	  0,   4,   1,	  0,	 0,  0)
-MUX_CFG("D19_1610_KBC2",	 3,   9,     0,	  0,   3,   1,	  0,	 0,  0)
-MUX_CFG("E18_1610_KBC3",	 3,   6,     0,	  0,   2,   1,	  0,	 0,  0)
-MUX_CFG("C21_1610_KBC4",	 3,   3,     0,	  0,   1,   1,	  0,	 0,  0)
-MUX_CFG("G18_1610_KBR0",	 4,   0,     0,	  0,   10,  1,	  0,	 1,  0)
-MUX_CFG("F19_1610_KBR1",	 3,   27,    0,	  0,   9,   1,	  0,	 1,  0)
-MUX_CFG("H14_1610_KBR2",	 3,   24,    0,	  0,   8,   1,	  0,	 1,  0)
-MUX_CFG("E20_1610_KBR3",	 3,   21,    0,	  0,   7,   1,	  0,	 1,  0)
-MUX_CFG("E19_1610_KBR4",	 3,   18,    0,	  0,   6,   1,	  0,	 1,  0)
-MUX_CFG("N19_1610_KBR5",	 6,  12,     1,	  1,   2,   1,	  1,	 1,  0)
-
-/* Power management */
-MUX_CFG("T20_1610_LOW_PWR",	 7,   12,    1,	  NA,   0,   0,   NA,	 0,  0)
-
-/* MCLK Settings */
-MUX_CFG("V5_1710_MCLK_ON",	 B,   15,    0,	  NA,   0,   0,   NA,	 0,  0)
-MUX_CFG("V5_1710_MCLK_OFF",	 B,   15,    6,	  NA,   0,   0,   NA,	 0,  0)
-MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0)
-MUX_CFG("R10_1610_MCLK_OFF",	 B,   18,    6,	  2,   22,   1,	  2,	 1,  1)
-
-/* CompactFlash controller, conflicts with MMC1 */
-MUX_CFG("P11_1610_CF_CD2",	 A,   27,    3,	  2,   15,   1,	  2,	 1,  1)
-MUX_CFG("R11_1610_CF_IOIS16",	 B,    0,    3,	  2,   16,   1,	  2,	 1,  1)
-MUX_CFG("V10_1610_CF_IREQ",	 A,   24,    3,	  2,   14,   0,	  2,	 0,  1)
-MUX_CFG("W10_1610_CF_RESET",	 A,   18,    3,	  2,   12,   1,	  2,	 1,  1)
-MUX_CFG("W11_1610_CF_CD1",	10,   15,    3,	  3,    8,   1,	  3,	 1,  1)
-};
+	/* 24xx Menelaus interrupt */
+	W19_24XX_SYS_NIRQ,
 
-#endif	/* __MUX_C__ */
+	/* 24xx GPIO */
+	Y20_24XX_GPIO60,
+	M15_24XX_GPIO92,
+};
 
 #ifdef	CONFIG_OMAP_MUX
 /* setup pin muxing in Linux */
-extern int omap_cfg_reg(reg_cfg_t reg_cfg);
+extern int omap1_mux_init(void);
+extern int omap2_mux_init(void);
+extern int omap_mux_register(struct pin_config * pins, unsigned long size);
+extern int omap_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap_cfg_reg(reg_cfg_t reg_cfg) { return 0; }
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap2_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
 #endif
 
 #endif
diff --git a/include/asm-arm/arch-omap/omap1510.h b/include/asm-arm/arch-omap/omap1510.h
index f086a3933906..c575d354850f 100644
--- a/include/asm-arm/arch-omap/omap1510.h
+++ b/include/asm-arm/arch-omap/omap1510.h
@@ -25,8 +25,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef __ASM_ARCH_OMAP1510_H
-#define __ASM_ARCH_OMAP1510_H
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
 
 /*
  * ----------------------------------------------------------------------------
@@ -44,5 +44,5 @@
 #define OMAP1510_DSPREG_SIZE	SZ_128K
 #define OMAP1510_DSPREG_START	0xE1000000
 
-#endif /*  __ASM_ARCH_OMAP1510_H */
+#endif /*  __ASM_ARCH_OMAP15XX_H */
 
diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h
index a9105466a417..6e59805fa654 100644
--- a/include/asm-arm/arch-omap/omap24xx.h
+++ b/include/asm-arm/arch-omap/omap24xx.h
@@ -1,15 +1,24 @@
 #ifndef __ASM_ARCH_OMAP24XX_H
 #define __ASM_ARCH_OMAP24XX_H
 
-#define OMAP24XX_L4_IO_BASE	0x48000000
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers. Note also that some of these defines are needed
+ * for omap1 to compile without adding ifdefs.
+ */
+
+#define L4_24XX_BASE		0x48000000
+#define L3_24XX_BASE		0x68000000
 
 /* interrupt controller */
-#define OMAP24XX_IC_BASE	(OMAP24XX_L4_IO_BASE + 0xfe000)
+#define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
 #define VA_IC_BASE		IO_ADDRESS(OMAP24XX_IC_BASE)
-
 #define OMAP24XX_IVA_INTC_BASE	0x40000000
-
 #define IRQ_SIR_IRQ		0x0040
 
+#define OMAP24XX_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
+#define OMAP24XX_PRCM_BASE	(L4_24XX_BASE + 0x8000)
+#define OMAP24XX_SDRC_BASE	(L3_24XX_BASE + 0x9000)
+
 #endif /* __ASM_ARCH_OMAP24XX_H */
 
diff --git a/include/asm-arm/arch-omap/omapfb.h b/include/asm-arm/arch-omap/omapfb.h
new file mode 100644
index 000000000000..4ba2622cc142
--- /dev/null
+++ b/include/asm-arm/arch-omap/omapfb.h
@@ -0,0 +1,281 @@
+/*
+ * File: include/asm-arm/arch-omap/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAPFB_H
+#define __OMAPFB_H
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+#define OMAP_IO(num)		_IO('O', num)
+
+#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+#define OMAPFB_VSYNC		OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, enum omapfb_update_mode)
+#define OMAPFB_GET_CAPS		OMAP_IOR(42, unsigned long)
+#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, enum omapfb_update_mode)
+#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(47, struct omapfb_update_window)
+#define OMAPFB_SETUP_PLANE	OMAP_IOW(48, struct omapfb_setup_plane)
+#define OMAPFB_ENABLE_PLANE	OMAP_IOW(49, struct omapfb_enable_plane)
+#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+
+#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK         0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE  0x0100
+
+enum omapfb_color_format {
+	OMAPFB_COLOR_RGB565 = 0,
+	OMAPFB_COLOR_YUV422,
+	OMAPFB_COLOR_YUV420,
+	OMAPFB_COLOR_CLUT_8BPP,
+	OMAPFB_COLOR_CLUT_4BPP,
+	OMAPFB_COLOR_CLUT_2BPP,
+	OMAPFB_COLOR_CLUT_1BPP,
+};
+
+struct omapfb_update_window {
+	u32 x, y;
+	u32 width, height;
+	u32 format;
+};
+
+enum omapfb_plane {
+	OMAPFB_PLANE_GFX = 0,
+	OMAPFB_PLANE_VID1,
+	OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+	OMAPFB_CHANNEL_OUT_LCD = 0,
+	OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_setup_plane {
+	u8  plane;
+	u8  channel_out;
+	u32 offset;
+	u32 pos_x, pos_y;
+	u32 width, height;
+	u32 color_mode;
+};
+
+struct omapfb_enable_plane {
+	u8  plane;
+	u8  enable;
+};
+
+enum omapfb_color_key_type {
+	OMAPFB_COLOR_KEY_DISABLED = 0,
+	OMAPFB_COLOR_KEY_GFX_DST,
+	OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+	u8  channel_out;
+	u32 background;
+	u32 trans_key;
+	u8  key_type;
+};
+
+enum omapfb_update_mode {
+	OMAPFB_UPDATE_DISABLED = 0,
+	OMAPFB_AUTO_UPDATE,
+	OMAPFB_MANUAL_UPDATE
+};
+
+#ifdef __KERNEL__
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+
+#define OMAP_LCDC_INV_VSYNC             0x0001
+#define OMAP_LCDC_INV_HSYNC             0x0002
+#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
+#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
+#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
+#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
+
+#define OMAP_LCDC_SIGNAL_MASK		0x003f
+
+#define OMAP_LCDC_PANEL_TFT		0x0100
+
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM		1
+#else
+#define OMAPFB_PLANE_NUM		3
+#endif
+
+struct omapfb_device;
+
+struct lcd_panel {
+	const char	*name;
+	int		config;		/* TFT/STN, signal inversion */
+	int		bpp;		/* Pixel format in fb mem */
+	int		data_lines;	/* Lines on LCD HW interface */
+
+	int		x_res, y_res;
+	int		pixel_clock;	/* In kHz */
+	int		hsw;		/* Horizontal synchronization
+					   pulse width */
+	int		hfp;		/* Horizontal front porch */
+	int		hbp;		/* Horizontal back porch */
+	int		vsw;		/* Vertical synchronization
+					   pulse width */
+	int		vfp;		/* Vertical front porch */
+	int		vbp;		/* Vertical back porch */
+	int		acb;		/* ac-bias pin frequency */
+	int		pcd;		/* pixel clock divider.
+					   Obsolete use pixel_clock instead */
+
+	int		(*init)		(struct omapfb_device *fbdev);
+	void		(*cleanup)	(void);
+	int		(*enable)	(void);
+	void		(*disable)	(void);
+	unsigned long	(*get_caps)	(void);
+	int		(*set_bklight_level)(unsigned int level);
+	unsigned int	(*get_bklight_level)(void);
+	unsigned int	(*get_bklight_max)  (void);
+	int		(*run_test)	(int test_num);
+};
+
+struct omapfb_device;
+
+struct extif_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+};
+
+struct lcd_ctrl_extif {
+	int  (*init)		(void);
+	void (*cleanup)		(void);
+	void (*set_timings)	(const struct extif_timings *timings);
+	void (*write_command)	(u32 cmd);
+	u32  (*read_data)	(void);
+	void (*write_data)	(u32 data);
+	void (*transfer_area)	(int width, int height,
+				 void (callback)(void * data), void *data);
+};
+
+struct lcd_ctrl {
+	const char	*name;
+	void		*data;
+
+	int		(*init)		  (struct omapfb_device *fbdev,
+					   int ext_mode, int req_vram_size);
+	void		(*cleanup)	  (void);
+	void		(*get_vram_layout)(unsigned long *size,
+					   void **virt_base,
+					   dma_addr_t *phys_base);
+	unsigned long	(*get_caps)	  (void);
+	int		(*set_update_mode)(enum omapfb_update_mode mode);
+	enum omapfb_update_mode (*get_update_mode)(void);
+	int		(*setup_plane)	  (int plane, int channel_out,
+					   unsigned long offset,
+					   int screen_width,
+					   int pos_x, int pos_y, int width,
+					   int height, int color_mode);
+	int		(*enable_plane)	  (int plane, int enable);
+	int		(*update_window)  (struct omapfb_update_window *win,
+					   void (*callback)(void *),
+					   void *callback_data);
+	void		(*sync)		  (void);
+	void		(*suspend)	  (void);
+	void		(*resume)	  (void);
+	int		(*run_test)	  (int test_num);
+	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
+					   u16 blue, u16 transp,
+					   int update_hw_mem);
+	int		(*set_color_key)  (struct omapfb_color_key *ck);
+
+};
+
+enum omapfb_state {
+	OMAPFB_DISABLED	= 0,
+	OMAPFB_SUSPENDED= 99,
+	OMAPFB_ACTIVE	= 100
+};
+
+struct omapfb_device {
+	int			state;
+	int                     ext_lcdc;               /* Using external
+                                                           LCD controller */
+	struct semaphore	rqueue_sema;
+
+	void			*vram_virt_base;
+	dma_addr_t		vram_phys_base;
+	unsigned long		vram_size;
+
+	int			color_mode;
+	int			palette_size;
+	int			mirror;
+	u32			pseudo_palette[17];
+
+	struct lcd_panel	*panel;			/* LCD panel */
+	struct lcd_ctrl         *ctrl;			/* LCD controller */
+	struct lcd_ctrl		*int_ctrl;		/* internal LCD ctrl */
+	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
+							   interface */
+	struct fb_info		*fb_info;
+
+	struct device		*dev;
+};
+
+extern struct lcd_panel h3_panel;
+extern struct lcd_panel h2_panel;
+extern struct lcd_panel p2_panel;
+extern struct lcd_panel osk_panel;
+extern struct lcd_panel innovator1610_panel;
+extern struct lcd_panel innovator1510_panel;
+
+#ifdef CONFIG_ARCH_OMAP1
+extern struct lcd_ctrl omap1_lcd_ctrl;
+#else
+extern struct lcd_ctrl omap2_disp_ctrl;
+#endif
+
+extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+
+#endif /* __KERNEL__ */
+
+#endif /* __OMAPFB_H */
diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h
index fbd742d0c499..7c790425e363 100644
--- a/include/asm-arm/arch-omap/pm.h
+++ b/include/asm-arm/arch-omap/pm.h
@@ -98,7 +98,14 @@
 #define OMAP1610_IDLECT3		0xfffece24
 #define OMAP1610_IDLE_LOOP_REQUEST	0x0400
 
-#if     !defined(CONFIG_ARCH_OMAP1510) && \
+#define OMAP730_IDLECT1_SLEEP_VAL	0x16c7
+#define OMAP730_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP730_IDLECT3_VAL		0x3f
+#define OMAP730_IDLECT3		0xfffece24
+#define OMAP730_IDLE_LOOP_REQUEST	0x0C00
+
+#if     !defined(CONFIG_ARCH_OMAP730) && \
+	!defined(CONFIG_ARCH_OMAP15XX) && \
 	!defined(CONFIG_ARCH_OMAP16XX) && \
 	!defined(CONFIG_ARCH_OMAP24XX)
 #error "Power management for this processor not implemented yet"
@@ -107,8 +114,10 @@
 #ifndef __ASSEMBLER__
 extern void omap_pm_idle(void);
 extern void omap_pm_suspend(void);
+extern void omap730_cpu_suspend(unsigned short, unsigned short);
 extern void omap1510_cpu_suspend(unsigned short, unsigned short);
 extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap730_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
 
@@ -118,6 +127,8 @@ extern void omap_serial_wake_trigger(int enable);
 #define omap_serial_wake_trigger(x)	{}
 #endif	/* CONFIG_OMAP_SERIAL_WAKE */
 
+extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap730_idle_loop_suspend_sz;
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1510_idle_loop_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
@@ -131,6 +142,10 @@ extern unsigned int omap1610_idle_loop_suspend_sz;
 #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
 #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
 
+#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
+#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
+
 #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
 #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
 #define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
@@ -188,13 +203,34 @@ enum mpui1510_save_state {
 	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
 	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
 	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
-#if defined(CONFIG_ARCH_OMAP1510)
+#if defined(CONFIG_ARCH_OMAP15XX)
 	MPUI1510_SLEEP_SAVE_SIZE
 #else
 	MPUI1510_SLEEP_SAVE_SIZE = 0
 #endif
 };
 
+enum mpui730_save_state {
+	MPUI730_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI730_SLEEP_SAVE_MPUI_CTRL,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730)
+	MPUI730_SLEEP_SAVE_SIZE
+#else
+	MPUI730_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
 enum mpui1610_save_state {
 	MPUI1610_SLEEP_SAVE_START = 0,
 	/*
diff --git a/include/asm-arm/arch-omap/prcm.h b/include/asm-arm/arch-omap/prcm.h
new file mode 100644
index 000000000000..7b48a5cbb15f
--- /dev/null
+++ b/include/asm-arm/arch-omap/prcm.h
@@ -0,0 +1,429 @@
+/*
+ * prcm.h - Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
+#define __ASM_ARM_ARCH_DPM_PRCM_H
+
+/* SET_PERFORMANCE_LEVEL PARAMETERS */
+#define PRCM_HALF_SPEED 1
+#define PRCM_FULL_SPEED 2
+
+#ifndef __ASSEMBLER__
+
+#define PRCM_REG32(offset)	__REG32(OMAP24XX_PRCM_BASE + (offset))
+
+#define PRCM_REVISION		PRCM_REG32(0x000)
+#define PRCM_SYSCONFIG		PRCM_REG32(0x010)
+#define PRCM_IRQSTATUS_MPU	PRCM_REG32(0x018)
+#define PRCM_IRQENABLE_MPU	PRCM_REG32(0x01C)
+#define PRCM_VOLTCTRL		PRCM_REG32(0x050)
+#define PRCM_VOLTST		PRCM_REG32(0x054)
+#define PRCM_CLKSRC_CTRL	PRCM_REG32(0x060)
+#define PRCM_CLKOUT_CTRL	PRCM_REG32(0x070)
+#define PRCM_CLKEMUL_CTRL	PRCM_REG32(0x078)
+#define PRCM_CLKCFG_CTRL	PRCM_REG32(0x080)
+#define PRCM_CLKCFG_STATUS	PRCM_REG32(0x084)
+#define PRCM_VOLTSETUP		PRCM_REG32(0x090)
+#define PRCM_CLKSSETUP		PRCM_REG32(0x094)
+#define PRCM_POLCTRL		PRCM_REG32(0x098)
+
+/* GENERAL PURPOSE */
+#define GENERAL_PURPOSE1	PRCM_REG32(0x0B0)
+#define GENERAL_PURPOSE2	PRCM_REG32(0x0B4)
+#define GENERAL_PURPOSE3	PRCM_REG32(0x0B8)
+#define GENERAL_PURPOSE4	PRCM_REG32(0x0BC)
+#define GENERAL_PURPOSE5	PRCM_REG32(0x0C0)
+#define GENERAL_PURPOSE6	PRCM_REG32(0x0C4)
+#define GENERAL_PURPOSE7	PRCM_REG32(0x0C8)
+#define GENERAL_PURPOSE8	PRCM_REG32(0x0CC)
+#define GENERAL_PURPOSE9	PRCM_REG32(0x0D0)
+#define GENERAL_PURPOSE10	PRCM_REG32(0x0D4)
+#define GENERAL_PURPOSE11	PRCM_REG32(0x0D8)
+#define GENERAL_PURPOSE12	PRCM_REG32(0x0DC)
+#define GENERAL_PURPOSE13	PRCM_REG32(0x0E0)
+#define GENERAL_PURPOSE14	PRCM_REG32(0x0E4)
+#define GENERAL_PURPOSE15	PRCM_REG32(0x0E8)
+#define GENERAL_PURPOSE16	PRCM_REG32(0x0EC)
+#define GENERAL_PURPOSE17	PRCM_REG32(0x0F0)
+#define GENERAL_PURPOSE18	PRCM_REG32(0x0F4)
+#define GENERAL_PURPOSE19	PRCM_REG32(0x0F8)
+#define GENERAL_PURPOSE20	PRCM_REG32(0x0FC)
+
+/* MPU */
+#define CM_CLKSEL_MPU		PRCM_REG32(0x140)
+#define CM_CLKSTCTRL_MPU	PRCM_REG32(0x148)
+#define RM_RSTST_MPU		PRCM_REG32(0x158)
+#define PM_WKDEP_MPU		PRCM_REG32(0x1C8)
+#define PM_EVGENCTRL_MPU	PRCM_REG32(0x1D4)
+#define PM_EVEGENONTIM_MPU	PRCM_REG32(0x1D8)
+#define PM_EVEGENOFFTIM_MPU	PRCM_REG32(0x1DC)
+#define PM_PWSTCTRL_MPU		PRCM_REG32(0x1E0)
+#define PM_PWSTST_MPU		PRCM_REG32(0x1E4)
+
+/* CORE */
+#define CM_FCLKEN1_CORE		PRCM_REG32(0x200)
+#define CM_FCLKEN2_CORE		PRCM_REG32(0x204)
+#define CM_FCLKEN3_CORE		PRCM_REG32(0x208)
+#define CM_ICLKEN1_CORE		PRCM_REG32(0x210)
+#define CM_ICLKEN2_CORE		PRCM_REG32(0x214)
+#define CM_ICLKEN3_CORE		PRCM_REG32(0x218)
+#define CM_ICLKEN4_CORE		PRCM_REG32(0x21C)
+#define CM_IDLEST1_CORE		PRCM_REG32(0x220)
+#define CM_IDLEST2_CORE		PRCM_REG32(0x224)
+#define CM_IDLEST3_CORE		PRCM_REG32(0x228)
+#define CM_IDLEST4_CORE		PRCM_REG32(0x22C)
+#define CM_AUTOIDLE1_CORE	PRCM_REG32(0x230)
+#define CM_AUTOIDLE2_CORE	PRCM_REG32(0x234)
+#define CM_AUTOIDLE3_CORE	PRCM_REG32(0x238)
+#define CM_AUTOIDLE4_CORE	PRCM_REG32(0x23C)
+#define CM_CLKSEL1_CORE		PRCM_REG32(0x240)
+#define CM_CLKSEL2_CORE		PRCM_REG32(0x244)
+#define CM_CLKSTCTRL_CORE	PRCM_REG32(0x248)
+#define PM_WKEN1_CORE		PRCM_REG32(0x2A0)
+#define PM_WKEN2_CORE		PRCM_REG32(0x2A4)
+#define PM_WKST1_CORE		PRCM_REG32(0x2B0)
+#define PM_WKST2_CORE		PRCM_REG32(0x2B4)
+#define PM_WKDEP_CORE		PRCM_REG32(0x2C8)
+#define PM_PWSTCTRL_CORE	PRCM_REG32(0x2E0)
+#define PM_PWSTST_CORE		PRCM_REG32(0x2E4)
+
+/* GFX */
+#define CM_FCLKEN_GFX		PRCM_REG32(0x300)
+#define CM_ICLKEN_GFX		PRCM_REG32(0x310)
+#define CM_IDLEST_GFX		PRCM_REG32(0x320)
+#define CM_CLKSEL_GFX		PRCM_REG32(0x340)
+#define CM_CLKSTCTRL_GFX	PRCM_REG32(0x348)
+#define RM_RSTCTRL_GFX		PRCM_REG32(0x350)
+#define RM_RSTST_GFX		PRCM_REG32(0x358)
+#define PM_WKDEP_GFX		PRCM_REG32(0x3C8)
+#define PM_PWSTCTRL_GFX		PRCM_REG32(0x3E0)
+#define PM_PWSTST_GFX		PRCM_REG32(0x3E4)
+
+/* WAKE-UP */
+#define CM_FCLKEN_WKUP		PRCM_REG32(0x400)
+#define CM_ICLKEN_WKUP		PRCM_REG32(0x410)
+#define CM_IDLEST_WKUP		PRCM_REG32(0x420)
+#define CM_AUTOIDLE_WKUP	PRCM_REG32(0x430)
+#define CM_CLKSEL_WKUP		PRCM_REG32(0x440)
+#define RM_RSTCTRL_WKUP		PRCM_REG32(0x450)
+#define RM_RSTTIME_WKUP		PRCM_REG32(0x454)
+#define RM_RSTST_WKUP		PRCM_REG32(0x458)
+#define PM_WKEN_WKUP		PRCM_REG32(0x4A0)
+#define PM_WKST_WKUP		PRCM_REG32(0x4B0)
+
+/* CLOCKS */
+#define CM_CLKEN_PLL		PRCM_REG32(0x500)
+#define CM_IDLEST_CKGEN		PRCM_REG32(0x520)
+#define CM_AUTOIDLE_PLL		PRCM_REG32(0x530)
+#define CM_CLKSEL1_PLL		PRCM_REG32(0x540)
+#define CM_CLKSEL2_PLL		PRCM_REG32(0x544)
+
+/* DSP */
+#define CM_FCLKEN_DSP		PRCM_REG32(0x800)
+#define CM_ICLKEN_DSP		PRCM_REG32(0x810)
+#define CM_IDLEST_DSP		PRCM_REG32(0x820)
+#define CM_AUTOIDLE_DSP		PRCM_REG32(0x830)
+#define CM_CLKSEL_DSP		PRCM_REG32(0x840)
+#define CM_CLKSTCTRL_DSP	PRCM_REG32(0x848)
+#define RM_RSTCTRL_DSP		PRCM_REG32(0x850)
+#define RM_RSTST_DSP		PRCM_REG32(0x858)
+#define PM_WKEN_DSP		PRCM_REG32(0x8A0)
+#define PM_WKDEP_DSP		PRCM_REG32(0x8C8)
+#define PM_PWSTCTRL_DSP		PRCM_REG32(0x8E0)
+#define PM_PWSTST_DSP		PRCM_REG32(0x8E4)
+#define PRCM_IRQSTATUS_DSP	PRCM_REG32(0x8F0)
+#define PRCM_IRQENABLE_DSP	PRCM_REG32(0x8F4)
+
+/* IVA */
+#define PRCM_IRQSTATUS_IVA	PRCM_REG32(0x8F8)
+#define PRCM_IRQENABLE_IVA	PRCM_REG32(0x8FC)
+
+/* Modem on 2430 */
+#define CM_FCLKEN_MDM		PRCM_REG32(0xC00)
+#define CM_ICLKEN_MDM		PRCM_REG32(0xC10)
+#define CM_IDLEST_MDM		PRCM_REG32(0xC20)
+#define CM_CLKSEL_MDM		PRCM_REG32(0xC40)
+
+/* FIXME: Move to header for 2430 */
+#define DISP_BASE		(OMAP24XX_L4_IO_BASE+0x50000)
+#define DISP_REG32(offset)	__REG32(DISP_BASE + (offset))
+
+#define OMAP24XX_GPMC_BASE	(L3_24XX_BASE + 0xa000)
+#define GPMC_BASE		(OMAP24XX_GPMC_BASE)
+#define GPMC_REG32(offset)	__REG32(GPMC_BASE + (offset))
+
+#define GPT1_BASE		(OMAP24XX_GPT1)
+#define GPT1_REG32(offset)	__REG32(GPT1_BASE + (offset))
+
+/* Misc sysconfig */
+#define DISPC_SYSCONFIG		DISP_REG32(0x410)
+#define SPI_BASE		(OMAP24XX_L4_IO_BASE+0x98000)
+#define MCSPI1_SYSCONFIG	__REG32(SPI_BASE + 0x10)
+#define MCSPI2_SYSCONFIG	__REG32(SPI_BASE+0x2000 + 0x10)
+
+//#define DSP_MMU_SYSCONFIG	0x5A000010
+#define CAMERA_MMU_SYSCONFIG	__REG32(DISP_BASE+0x2C10)
+//#define IVA_MMU_SYSCONFIG	0x5D000010
+//#define DSP_DMA_SYSCONFIG	0x00FCC02C
+#define CAMERA_DMA_SYSCONFIG	__REG32(DISP_BASE+0x282C)
+#define SYSTEM_DMA_SYSCONFIG	__REG32(DISP_BASE+0x602C)
+#define GPMC_SYSCONFIG		GPMC_REG32(0x010)
+#define MAILBOXES_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE+0x94010)
+#define UART1_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6A054)
+#define UART2_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6C054)
+#define UART3_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE+0x6E054)
+//#define IVA_SYSCONFIG		0x5C060010
+#define SDRC_SYSCONFIG		__REG32(OMAP24XX_SDRC_BASE+0x10)
+#define SMS_SYSCONFIG		__REG32(OMAP24XX_SMS_BASE+0x10)
+#define SSI_SYSCONFIG		__REG32(DISP_BASE+0x8010)
+//#define VLYNQ_SYSCONFIG	0x67FFFE10
+
+/* rkw - good cannidates for PM_ to start what nm was trying */
+#define OMAP24XX_GPT2		(OMAP24XX_L4_IO_BASE+0x2A000)
+#define OMAP24XX_GPT3		(OMAP24XX_L4_IO_BASE+0x78000)
+#define OMAP24XX_GPT4		(OMAP24XX_L4_IO_BASE+0x7A000)
+#define OMAP24XX_GPT5		(OMAP24XX_L4_IO_BASE+0x7C000)
+#define OMAP24XX_GPT6		(OMAP24XX_L4_IO_BASE+0x7E000)
+#define OMAP24XX_GPT7		(OMAP24XX_L4_IO_BASE+0x80000)
+#define OMAP24XX_GPT8		(OMAP24XX_L4_IO_BASE+0x82000)
+#define OMAP24XX_GPT9		(OMAP24XX_L4_IO_BASE+0x84000)
+#define OMAP24XX_GPT10		(OMAP24XX_L4_IO_BASE+0x86000)
+#define OMAP24XX_GPT11		(OMAP24XX_L4_IO_BASE+0x88000)
+#define OMAP24XX_GPT12		(OMAP24XX_L4_IO_BASE+0x8A000)
+
+#define GPTIMER1_SYSCONFIG	GPT1_REG32(0x010)
+#define GPTIMER2_SYSCONFIG	__REG32(OMAP24XX_GPT2 + 0x10)
+#define GPTIMER3_SYSCONFIG	__REG32(OMAP24XX_GPT3 + 0x10)
+#define GPTIMER4_SYSCONFIG	__REG32(OMAP24XX_GPT4 + 0x10)
+#define GPTIMER5_SYSCONFIG	__REG32(OMAP24XX_GPT5 + 0x10)
+#define GPTIMER6_SYSCONFIG	__REG32(OMAP24XX_GPT6 + 0x10)
+#define GPTIMER7_SYSCONFIG	__REG32(OMAP24XX_GPT7 + 0x10)
+#define GPTIMER8_SYSCONFIG	__REG32(OMAP24XX_GPT8 + 0x10)
+#define GPTIMER9_SYSCONFIG	__REG32(OMAP24XX_GPT9 + 0x10)
+#define GPTIMER10_SYSCONFIG	__REG32(OMAP24XX_GPT10 + 0x10)
+#define GPTIMER11_SYSCONFIG	__REG32(OMAP24XX_GPT11 + 0x10)
+#define GPTIMER12_SYSCONFIG	__REG32(OMAP24XX_GPT12 + 0x10)
+
+#define GPIOX_BASE(X)		(OMAP24XX_GPIO_BASE+(0x2000*((X)-1)))
+
+#define GPIO1_SYSCONFIG		__REG32((GPIOX_BASE(1)+0x10))
+#define GPIO2_SYSCONFIG		__REG32((GPIOX_BASE(2)+0x10))
+#define GPIO3_SYSCONFIG		__REG32((GPIOX_BASE(3)+0x10))
+#define GPIO4_SYSCONFIG		__REG32((GPIOX_BASE(4)+0x10))
+
+/* GP TIMER 1 */
+#define GPTIMER1_TISTAT		GPT1_REG32(0x014)
+#define GPTIMER1_TISR		GPT1_REG32(0x018)
+#define GPTIMER1_TIER		GPT1_REG32(0x01C)
+#define GPTIMER1_TWER		GPT1_REG32(0x020)
+#define GPTIMER1_TCLR		GPT1_REG32(0x024)
+#define GPTIMER1_TCRR		GPT1_REG32(0x028)
+#define GPTIMER1_TLDR		GPT1_REG32(0x02C)
+#define GPTIMER1_TTGR		GPT1_REG32(0x030)
+#define GPTIMER1_TWPS		GPT1_REG32(0x034)
+#define GPTIMER1_TMAR		GPT1_REG32(0x038)
+#define GPTIMER1_TCAR1		GPT1_REG32(0x03C)
+#define GPTIMER1_TSICR		GPT1_REG32(0x040)
+#define GPTIMER1_TCAR2		GPT1_REG32(0x044)
+
+/* rkw -- base fix up please... */
+#define GPTIMER3_TISR		__REG32(OMAP24XX_L4_IO_BASE+0x78018)
+
+/* SDRC */
+#define SDRC_DLLA_CTRL		__REG32(OMAP24XX_SDRC_BASE+0x060)
+#define SDRC_DLLA_STATUS	__REG32(OMAP24XX_SDRC_BASE+0x064)
+#define SDRC_DLLB_CTRL		__REG32(OMAP24XX_SDRC_BASE+0x068)
+#define SDRC_DLLB_STATUS	__REG32(OMAP24XX_SDRC_BASE+0x06C)
+#define SDRC_POWER		__REG32(OMAP24XX_SDRC_BASE+0x070)
+#define SDRC_MR_0		__REG32(OMAP24XX_SDRC_BASE+0x084)
+
+/* GPIO 1 */
+#define GPIO1_BASE		GPIOX_BASE(1)
+#define GPIO1_REG32(offset)	__REG32(GPIO1_BASE + (offset))
+#define GPIO1_IRQENABLE1	GPIO1_REG32(0x01C)
+#define GPIO1_IRQSTATUS1	GPIO1_REG32(0x018)
+#define GPIO1_IRQENABLE2	GPIO1_REG32(0x02C)
+#define GPIO1_IRQSTATUS2	GPIO1_REG32(0x028)
+#define GPIO1_WAKEUPENABLE	GPIO1_REG32(0x020)
+#define GPIO1_RISINGDETECT	GPIO1_REG32(0x048)
+#define GPIO1_DATAIN		GPIO1_REG32(0x038)
+#define GPIO1_OE		GPIO1_REG32(0x034)
+#define GPIO1_DATAOUT		GPIO1_REG32(0x03C)
+
+/* GPIO2 */
+#define GPIO2_BASE		GPIOX_BASE(2)
+#define GPIO2_REG32(offset)	__REG32(GPIO2_BASE + (offset))
+#define GPIO2_IRQENABLE1	GPIO2_REG32(0x01C)
+#define GPIO2_IRQSTATUS1	GPIO2_REG32(0x018)
+#define GPIO2_IRQENABLE2	GPIO2_REG32(0x02C)
+#define GPIO2_IRQSTATUS2	GPIO2_REG32(0x028)
+#define GPIO2_WAKEUPENABLE	GPIO2_REG32(0x020)
+#define GPIO2_RISINGDETECT	GPIO2_REG32(0x048)
+#define GPIO2_DATAIN		GPIO2_REG32(0x038)
+#define GPIO2_OE		GPIO2_REG32(0x034)
+#define GPIO2_DATAOUT		GPIO2_REG32(0x03C)
+
+/* GPIO 3 */
+#define GPIO3_BASE		GPIOX_BASE(3)
+#define GPIO3_REG32(offset)	__REG32(GPIO3_BASE + (offset))
+#define GPIO3_IRQENABLE1	GPIO3_REG32(0x01C)
+#define GPIO3_IRQSTATUS1	GPIO3_REG32(0x018)
+#define GPIO3_IRQENABLE2	GPIO3_REG32(0x02C)
+#define GPIO3_IRQSTATUS2	GPIO3_REG32(0x028)
+#define GPIO3_WAKEUPENABLE	GPIO3_REG32(0x020)
+#define GPIO3_RISINGDETECT	GPIO3_REG32(0x048)
+#define GPIO3_FALLINGDETECT	GPIO3_REG32(0x04C)
+#define GPIO3_DATAIN		GPIO3_REG32(0x038)
+#define GPIO3_OE		GPIO3_REG32(0x034)
+#define GPIO3_DATAOUT		GPIO3_REG32(0x03C)
+#define GPIO3_DEBOUNCENABLE	GPIO3_REG32(0x050)
+#define GPIO3_DEBOUNCINGTIME	GPIO3_REG32(0x054)
+
+/* GPIO 4 */
+#define GPIO4_BASE		GPIOX_BASE(4)
+#define GPIO4_REG32(offset)	__REG32(GPIO4_BASE + (offset))
+#define GPIO4_IRQENABLE1	GPIO4_REG32(0x01C)
+#define GPIO4_IRQSTATUS1	GPIO4_REG32(0x018)
+#define GPIO4_IRQENABLE2	GPIO4_REG32(0x02C)
+#define GPIO4_IRQSTATUS2	GPIO4_REG32(0x028)
+#define GPIO4_WAKEUPENABLE	GPIO4_REG32(0x020)
+#define GPIO4_RISINGDETECT	GPIO4_REG32(0x048)
+#define GPIO4_FALLINGDETECT	GPIO4_REG32(0x04C)
+#define GPIO4_DATAIN		GPIO4_REG32(0x038)
+#define GPIO4_OE		GPIO4_REG32(0x034)
+#define GPIO4_DATAOUT		GPIO4_REG32(0x03C)
+#define GPIO4_DEBOUNCENABLE	GPIO4_REG32(0x050)
+#define GPIO4_DEBOUNCINGTIME	GPIO4_REG32(0x054)
+
+
+/* IO CONFIG */
+#define CONTROL_BASE		(OMAP24XX_CTRL_BASE)
+#define CONTROL_REG32(offset)	__REG32(CONTROL_BASE + (offset))
+
+#define CONTROL_PADCONF_SPI1_NCS2	CONTROL_REG32(0x104)
+#define CONTROL_PADCONF_SYS_XTALOUT	CONTROL_REG32(0x134)
+#define CONTROL_PADCONF_UART1_RX	CONTROL_REG32(0x0C8)
+#define CONTROL_PADCONF_MCBSP1_DX	CONTROL_REG32(0x10C)
+#define CONTROL_PADCONF_GPMC_NCS4	CONTROL_REG32(0x090)
+#define CONTROL_PADCONF_DSS_D5		CONTROL_REG32(0x0B8)
+#define CONTROL_PADCONF_DSS_D9		CONTROL_REG32(0x0BC)
+#define CONTROL_PADCONF_DSS_D13		CONTROL_REG32(0x0C0)
+#define CONTROL_PADCONF_DSS_VSYNC	CONTROL_REG32(0x0CC)
+
+/* CONTROL */
+#define CONTROL_DEVCONF		CONTROL_REG32(0x274)
+
+/* INTERRUPT CONTROLLER */
+#define INTC_BASE		(OMAP24XX_L4_IO_BASE+0xfe000)
+#define INTC_REG32(offset)	__REG32(INTC_BASE + (offset))
+
+#define INTC1_U_BASE		INTC_REG32(0x000)
+#define INTC_MIR0		INTC_REG32(0x084)
+#define INTC_MIR_SET0		INTC_REG32(0x08C)
+#define INTC_MIR_CLEAR0		INTC_REG32(0x088)
+#define INTC_ISR_CLEAR0		INTC_REG32(0x094)
+#define INTC_MIR1		INTC_REG32(0x0A4)
+#define INTC_MIR_SET1		INTC_REG32(0x0AC)
+#define INTC_MIR_CLEAR1		INTC_REG32(0x0A8)
+#define INTC_ISR_CLEAR1		INTC_REG32(0x0B4)
+#define INTC_MIR2		INTC_REG32(0x0C4)
+#define INTC_MIR_SET2		INTC_REG32(0x0CC)
+#define INTC_MIR_CLEAR2		INTC_REG32(0x0C8)
+#define INTC_ISR_CLEAR2		INTC_REG32(0x0D4)
+#define INTC_SIR_IRQ		INTC_REG32(0x040)
+#define INTC_CONTROL		INTC_REG32(0x048)
+#define INTC_ILR11		INTC_REG32(0x12C)
+#define INTC_ILR32		INTC_REG32(0x180)
+#define INTC_ILR37		INTC_REG32(0x194)
+#define INTC_SYSCONFIG		INTC_REG32(0x010)
+
+/* RAM FIREWALL */
+#define RAMFW_BASE		(0x68005000)
+#define RAMFW_REG32(offset)	__REG32(RAMFW_BASE + (offset))
+
+#define RAMFW_REQINFOPERM0	RAMFW_REG32(0x048)
+#define RAMFW_READPERM0		RAMFW_REG32(0x050)
+#define RAMFW_WRITEPERM0	RAMFW_REG32(0x058)
+
+/* GPMC CS1 FPGA ON USER INTERFACE MODULE */
+//#define DEBUG_BOARD_LED_REGISTER 0x04000014
+
+/* GPMC CS0 */
+#define GPMC_CONFIG1_0		GPMC_REG32(0x060)
+#define GPMC_CONFIG2_0		GPMC_REG32(0x064)
+#define GPMC_CONFIG3_0		GPMC_REG32(0x068)
+#define GPMC_CONFIG4_0		GPMC_REG32(0x06C)
+#define GPMC_CONFIG5_0		GPMC_REG32(0x070)
+#define GPMC_CONFIG6_0		GPMC_REG32(0x074)
+#define GPMC_CONFIG7_0		GPMC_REG32(0x078)
+
+/* GPMC CS1 */
+#define GPMC_CONFIG1_1		GPMC_REG32(0x090)
+#define GPMC_CONFIG2_1		GPMC_REG32(0x094)
+#define GPMC_CONFIG3_1		GPMC_REG32(0x098)
+#define GPMC_CONFIG4_1		GPMC_REG32(0x09C)
+#define GPMC_CONFIG5_1		GPMC_REG32(0x0a0)
+#define GPMC_CONFIG6_1		GPMC_REG32(0x0a4)
+#define GPMC_CONFIG7_1		GPMC_REG32(0x0a8)
+
+/* DSS */
+#define DSS_CONTROL		DISP_REG32(0x040)
+#define DISPC_CONTROL		DISP_REG32(0x440)
+#define DISPC_SYSSTATUS		DISP_REG32(0x414)
+#define DISPC_IRQSTATUS		DISP_REG32(0x418)
+#define DISPC_IRQENABLE		DISP_REG32(0x41C)
+#define DISPC_CONFIG		DISP_REG32(0x444)
+#define DISPC_DEFAULT_COLOR0	DISP_REG32(0x44C)
+#define DISPC_DEFAULT_COLOR1	DISP_REG32(0x450)
+#define DISPC_TRANS_COLOR0	DISP_REG32(0x454)
+#define DISPC_TRANS_COLOR1	DISP_REG32(0x458)
+#define DISPC_LINE_NUMBER	DISP_REG32(0x460)
+#define DISPC_TIMING_H		DISP_REG32(0x464)
+#define DISPC_TIMING_V		DISP_REG32(0x468)
+#define DISPC_POL_FREQ		DISP_REG32(0x46C)
+#define DISPC_DIVISOR		DISP_REG32(0x470)
+#define DISPC_SIZE_DIG		DISP_REG32(0x478)
+#define DISPC_SIZE_LCD		DISP_REG32(0x47C)
+#define DISPC_GFX_BA0		DISP_REG32(0x480)
+#define DISPC_GFX_BA1		DISP_REG32(0x484)
+#define DISPC_GFX_POSITION	DISP_REG32(0x488)
+#define DISPC_GFX_SIZE		DISP_REG32(0x48C)
+#define DISPC_GFX_ATTRIBUTES	DISP_REG32(0x4A0)
+#define DISPC_GFX_FIFO_THRESHOLD	DISP_REG32(0x4A4)
+#define DISPC_GFX_ROW_INC	DISP_REG32(0x4AC)
+#define DISPC_GFX_PIXEL_INC	DISP_REG32(0x4B0)
+#define DISPC_GFX_WINDOW_SKIP	DISP_REG32(0x4B4)
+#define DISPC_GFX_TABLE_BA	DISP_REG32(0x4B8)
+#define DISPC_DATA_CYCLE1	DISP_REG32(0x5D4)
+#define DISPC_DATA_CYCLE2	DISP_REG32(0x5D8)
+#define DISPC_DATA_CYCLE3	DISP_REG32(0x5DC)
+
+/* Wake up define for board */
+#define GPIO97			(1 << 1)
+#define GPIO88			(1 << 24)
+
+#endif /* __ASSEMBLER__ */
+
+#endif
+
+
+
+
+
diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h
new file mode 100644
index 000000000000..e72ccbf0fe06
--- /dev/null
+++ b/include/asm-arm/arch-omap/sram.h
@@ -0,0 +1,38 @@
+/*
+ * linux/include/asm-arm/arch-omap/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
+
+extern void * omap_sram_push(void * start, unsigned long size);
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+				u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+				      u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+
+/* Do not use these */
+extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long sram_reprogram_clock_sz;
+
+extern void sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+			  u32 base_cs, u32 force_unlock);
+extern unsigned long sram_ddr_init_sz;
+
+extern u32 sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+extern unsigned long sram_set_prcm_sz;
+
+extern void sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type);
+extern unsigned long sram_reprogram_sdrc_sz;
+
+#endif
diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h
index ff37bc27e603..b43cdd2a3874 100644
--- a/include/asm-arm/arch-omap/system.h
+++ b/include/asm-arm/arch-omap/system.h
@@ -6,18 +6,21 @@
 #define __ASM_ARCH_SYSTEM_H
 #include <linux/config.h>
 #include <asm/mach-types.h>
+#include <asm/hardware/clock.h>
 #include <asm/arch/hardware.h>
-#include <asm/mach-types.h>
+#include <asm/arch/prcm.h>
+
+#ifndef CONFIG_MACH_VOICEBLUE
+#define voiceblue_reset()		do {} while (0)
+#endif
 
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void omap1_arch_reset(char mode)
 {
-
-#ifdef CONFIG_ARCH_OMAP16XX
 	/*
 	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
 	 * "Global Software Reset Affects Traffic Controller Frequency".
@@ -27,13 +30,31 @@ static inline void arch_reset(char mode)
 				 DPLL_CTL);
 		omap_writew(0x8, ARM_RSTCT1);
 	}
-#endif
-#ifdef CONFIG_MACH_VOICEBLUE
+
 	if (machine_is_voiceblue())
 		voiceblue_reset();
 	else
-#endif
 		omap_writew(1, ARM_RSTCT1);
 }
 
+static inline void omap2_arch_reset(char mode)
+{
+	u32 rate;
+	struct clk *vclk, *sclk;
+
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+	rate = clk_get_rate(sclk);
+	clk_set_rate(vclk, rate);	/* go to bypass for OMAP limitation */
+	RM_RSTCTRL_WKUP |= 2;
+}
+
+static inline void arch_reset(char mode)
+{
+	if (!cpu_is_omap24xx())
+		omap1_arch_reset(mode);
+	else
+		omap2_arch_reset(mode);
+}
+
 #endif
diff --git a/include/asm-arm/arch-omap/timex.h b/include/asm-arm/arch-omap/timex.h
index b61ddb491e83..21f2e367185a 100644
--- a/include/asm-arm/arch-omap/timex.h
+++ b/include/asm-arm/arch-omap/timex.h
@@ -28,6 +28,14 @@
 #if !defined(__ASM_ARCH_OMAP_TIMEX_H)
 #define __ASM_ARCH_OMAP_TIMEX_H
 
+/*
+ * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
+ * and that's why the CLOCK_TICK_RATE is not 32768.
+ */
+#ifdef CONFIG_OMAP_32K_TIMER
+#define CLOCK_TICK_RATE		(CONFIG_OMAP_32K_TIMER_HZ)
+#else
 #define CLOCK_TICK_RATE		(HZ * 100000UL)
+#endif
 
 #endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h
index 3545c86859cc..c718264affbd 100644
--- a/include/asm-arm/arch-omap/uncompress.h
+++ b/include/asm-arm/arch-omap/uncompress.h
@@ -36,10 +36,14 @@ putstr(const char *s)
 	volatile u8 * uart = 0;
 	int shift = 2;
 
+#ifdef CONFIG_MACH_OMAP_PALMTE
+	return;
+#endif
+
 #ifdef CONFIG_ARCH_OMAP
 #ifdef	CONFIG_OMAP_LL_DEBUG_UART3
 	uart = (volatile u8 *)(OMAP_UART3_BASE);
-#elif	CONFIG_OMAP_LL_DEBUG_UART2
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
 	uart = (volatile u8 *)(OMAP_UART2_BASE);
 #else
 	uart = (volatile u8 *)(OMAP_UART1_BASE);
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h
index 311f2bb5386a..0b43495d24b4 100644
--- a/include/asm-arm/arch-pxa/sharpsl.h
+++ b/include/asm-arm/arch-pxa/sharpsl.h
@@ -21,12 +21,18 @@ struct corgits_machinfo {
 	void (*wait_hsync)(void);
 };
 
+
 /*
  * SharpSL Backlight
  */
-
 struct corgibl_machinfo {
 	int max_intensity;
 	void (*set_bl_intensity)(int intensity);
 };
+extern void corgibl_limit_intensity(int limit);
+
 
+/*
+ * SharpSL Battery/PM Driver
+ */
+extern void sharpsl_battery_kick(void);
diff --git a/include/asm-arm/arch-pxa/ssp.h b/include/asm-arm/arch-pxa/ssp.h
index 6ec67b018c09..949878c0d908 100644
--- a/include/asm-arm/arch-pxa/ssp.h
+++ b/include/asm-arm/arch-pxa/ssp.h
@@ -18,6 +18,11 @@
 #ifndef SSP_H
 #define SSP_H
 
+/*
+ * SSP initialisation flags
+ */
+#define SSP_NO_IRQ	0x1		/* don't register an irq handler in SSP driver */
+
 struct ssp_state {
 	u32	cr0;
 	u32 cr1;
@@ -31,6 +36,7 @@ struct ssp_dev {
 	u32 flags;
 	u32 psp_flags;
 	u32 speed;
+	int irq;
 };
 
 int ssp_write_word(struct ssp_dev *dev, u32 data);
@@ -40,7 +46,7 @@ void ssp_enable(struct ssp_dev *dev);
 void ssp_disable(struct ssp_dev *dev);
 void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp);
 void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp);
-int ssp_init(struct ssp_dev *dev, u32 port);
+int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
 int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
 void ssp_exit(struct ssp_dev *dev);