summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJarkko Nikula <jarkko.nikula@nokia.com>2009-01-15 13:09:52 +0200
committerTony Lindgren <tony@atomide.com>2009-01-15 13:09:52 +0200
commit73069e388d0f2509e45e1a58b0facca99ef2446e (patch)
treec9c69ad9df07bbc2f809faa718d65b6773e9f9d9
parentdc0e88c7e15acbe3d7e8682312f709938f0dcf01 (diff)
downloadblackbird-op-linux-73069e388d0f2509e45e1a58b0facca99ef2446e.tar.gz
blackbird-op-linux-73069e388d0f2509e45e1a58b0facca99ef2446e.zip
ARM: OMAP: Fix gpio by switching to generic gpio calls, v2
Fix compile by removing remaining omap specific gpio calls. Based on earlier patches by Jarkko Nikula. Also remove old GPIO key code, there is already a patch to do this with gpio_keys. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-rw-r--r--arch/arm/mach-omap1/board-sx1.c6
-rw-r--r--arch/arm/mach-omap2/board-apollon.c64
-rw-r--r--arch/arm/mach-omap2/board-ldp.c2
-rw-r--r--arch/arm/plat-omap/include/mach/gpio.h10
-rw-r--r--drivers/mtd/onenand/omap2.c6
5 files changed, 13 insertions, 75 deletions
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 8171fe0ca082..09a242261a3d 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -423,9 +423,9 @@ static void __init omap_sx1_init(void)
/* turn on USB power */
/* sx1_setusbpower(1); cant do it here because i2c is not ready */
- omap_request_gpio(1); /* A_IRDA_OFF */
- omap_request_gpio(11); /* A_SWITCH */
- omap_request_gpio(15); /* A_USB_ON */
+ gpio_request(1, "A_IRDA_OFF");
+ gpio_request(11, "A_SWITCH");
+ gpio_request(15, "A_USB_ON");
gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */
gpio_direction_output(11, 0); /*A_SWITCH = 0 */
gpio_direction_output(15, 0); /*A_USB_ON = 0 */
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index bf1e5d32c2a3..0a7b24ba1652 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -22,8 +22,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/leds.h>
#include <linux/err.h>
@@ -282,65 +280,16 @@ static void __init apollon_led_init(void)
{
/* LED0 - AA10 */
omap_cfg_reg(AA10_242X_GPIO13);
- omap_request_gpio(LED0_GPIO13);
- omap_set_gpio_direction(LED0_GPIO13, 0);
- omap_set_gpio_dataout(LED0_GPIO13, 0);
+ gpio_request(LED0_GPIO13, "LED0");
+ gpio_direction_output(LED0_GPIO13, 0);
/* LED1 - AA6 */
omap_cfg_reg(AA6_242X_GPIO14);
- omap_request_gpio(LED1_GPIO14);
- omap_set_gpio_direction(LED1_GPIO14, 0);
- omap_set_gpio_dataout(LED1_GPIO14, 0);
+ gpio_request(LED1_GPIO14, "LED1");
+ gpio_direction_output(LED1_GPIO14, 0);
/* LED2 - AA4 */
omap_cfg_reg(AA4_242X_GPIO15);
- omap_request_gpio(LED2_GPIO15);
- omap_set_gpio_direction(LED2_GPIO15, 0);
- omap_set_gpio_dataout(LED2_GPIO15, 0);
-}
-
-static irqreturn_t apollon_sw_interrupt(int irq, void *ignored)
-{
- static unsigned int led0, led1, led2;
-
- if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
- omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
- else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
- omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
- else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
- omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);
-
- return IRQ_HANDLED;
-}
-
-static void __init apollon_sw_init(void)
-{
- /* Enter SW - Y11 */
- omap_cfg_reg(Y11_242X_GPIO16);
- omap_request_gpio(SW_ENTER_GPIO16);
- gpio_direction_input(SW_ENTER_GPIO16);
- /* Up SW - AA12 */
- omap_cfg_reg(AA12_242X_GPIO17);
- omap_request_gpio(SW_UP_GPIO17);
- gpio_direction_input(SW_UP_GPIO17);
- /* Down SW - AA8 */
- omap_cfg_reg(AA8_242X_GPIO58);
- omap_request_gpio(SW_DOWN_GPIO58);
- gpio_direction_input(SW_DOWN_GPIO58);
-
- set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
- if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
- IRQF_SHARED, "enter sw",
- &apollon_sw_interrupt))
- return;
- set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
- if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
- IRQF_SHARED, "up sw",
- &apollon_sw_interrupt))
- return;
- set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
- if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
- IRQF_SHARED, "down sw",
- &apollon_sw_interrupt))
- return;
+ gpio_request(LED2_GPIO15, "LED2");
+ gpio_direction_output(LED2_GPIO15, 0);
}
static void __init apollon_usb_init(void)
@@ -357,7 +306,6 @@ static void __init omap_apollon_init(void)
u32 v;
apollon_led_init();
- apollon_sw_init();
apollon_flash_init();
apollon_usb_init();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index aa6972781e4a..f6a13451d1fd 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -88,7 +88,7 @@ static inline void __init ldp_init_smc911x(void)
ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
- if (omap_request_gpio(eth_gpio) < 0) {
+ if (gpio_request(eth_gpio, "smc911x irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
eth_gpio);
return;
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 04e68e88f134..8d9dfe314387 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -87,16 +87,6 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable);
#include <linux/errno.h>
#include <asm-generic/gpio.h>
-static inline int omap_request_gpio(int gpio)
-{
- return gpio_request(gpio, "FIXME");
-}
-
-static inline void omap_free_gpio(int gpio)
-{
- gpio_free(gpio);
-}
-
static inline int gpio_get_value(unsigned gpio)
{
return __gpio_get_value(gpio);
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 96ecc1766fa8..77a4f1446156 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -629,7 +629,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
}
if (c->gpio_irq) {
- if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
+ if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
dev_err(&pdev->dev, "Failed to request GPIO%d for "
"OneNAND\n", c->gpio_irq);
goto err_iounmap;
@@ -726,7 +726,7 @@ err_release_dma:
free_irq(gpio_to_irq(c->gpio_irq), c);
err_release_gpio:
if (c->gpio_irq)
- omap_free_gpio(c->gpio_irq);
+ gpio_free(c->gpio_irq);
err_iounmap:
iounmap(c->onenand.base);
err_release_mem_region:
@@ -761,7 +761,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
if (c->gpio_irq) {
free_irq(gpio_to_irq(c->gpio_irq), c);
- omap_free_gpio(c->gpio_irq);
+ gpio_free(c->gpio_irq);
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
OpenPOWER on IntegriCloud