diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2013-06-21 15:00:24 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2013-06-21 15:00:24 +0200 |
| commit | e8f2ca97151892ab723dd8317313063cef79839d (patch) | |
| tree | 147047c432e3af4cad25b4672b493b93edc32844 | |
| parent | 704b1005d1e23fa35a32e591a32183c309917bbd (diff) | |
| parent | eff4e7c7f32a4e4be60b19b209ffab5cb430b385 (diff) | |
| download | blackbird-op-linux-e8f2ca97151892ab723dd8317313063cef79839d.tar.gz blackbird-op-linux-e8f2ca97151892ab723dd8317313063cef79839d.zip | |
Merge tag 'soc-exynos5420-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late
From Kukjin Kim:
based on tags/common-clk-audio
- add support for exynos5420 SoC
* tag 'soc-exynos5420-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: extend soft-reset support for EXYNOS5420
ARM: EXYNOS: add secondary CPU boot base location for EXYNOS5420
clocksource: exynos_mct: use (request/free)_irq calls for local timer registration
ARM: dts: Add initial device tree support for EXYNOS5420
clk: exynos5420: register clocks using common clock framework
ARM: EXYNOS: use four additional chipid bits to identify EXYNOS family
serial: samsung: select EXYNOS specific driver data if ARCH_EXYNOS is defined
ARM: EXYNOS: Add support for EXYNOS5420 SoC
ARM: dts: list the CPU nodes for EXYNOS5250
ARM: dts: fork out common EXYNOS5 nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
56 files changed, 2986 insertions, 260 deletions
diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt new file mode 100644 index 000000000000..a1201802f90d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt @@ -0,0 +1,64 @@ +* Samsung Audio Subsystem Clock Controller + +The Samsung Audio Subsystem clock controller generates and supplies clocks +to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock +binding described here is applicable to all SoC's in Exynos family. + +Required Properties: + +- compatible: should be one of the following: + - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs. + - "samsung,exynos5250-audss-clock" - controller compatible with all Exynos5 SoCs. + +- reg: physical base address and length of the controller's register set. + +- #clock-cells: should be 1. + +The following is the list of clocks generated by the controller. Each clock is +assigned an identifier and client nodes use this identifier to specify the +clock which they consume. Some of the clocks are available only on a particular +Exynos4 SoC and this is specified where applicable. + +Provided clocks: + +Clock ID SoC (if specific) +----------------------------------------------- + +mout_audss 0 +mout_i2s 1 +dout_srp 2 +dout_aud_bus 3 +dout_i2s 4 +srp_clk 5 +i2s_bus 6 +sclk_i2s 7 +pcm_bus 8 +sclk_pcm 9 + +Example 1: An example of a clock controller node is listed below. + +clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; +}; + +Example 2: I2S controller node that consumes the clock generated by the clock + controller. Refer to the standard clock bindings for information + about 'clocks' and 'clock-names' property. + +i2s0: i2s@03830000 { + compatible = "samsung,i2s-v5"; + reg = <0x03830000 0x100>; + dmas = <&pdma0 10 + &pdma0 9 + &pdma0 8>; + dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>, + <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1", + "mout_audss", "mout_i2s"; +}; diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt index ea5e26f16aec..14d5c2af26f4 100644 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -102,6 +102,7 @@ Exynos4 SoC and this is specified where applicable. sclk_spi0_isp 174 Exynos4x12 sclk_spi1_isp 175 Exynos4x12 sclk_uart_isp 176 Exynos4x12 + sclk_fimg2d 177 [Peripheral Clock Gates] @@ -129,7 +130,7 @@ Exynos4 SoC and this is specified where applicable. smmu_mfcl 274 smmu_mfcr 275 g3d 276 - g2d 277 Exynos4210 + g2d 277 rotator 278 Exynos4210 mdma 279 Exynos4210 smmu_g2d 280 Exynos4210 diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt new file mode 100644 index 000000000000..9bcc4b1bff51 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt @@ -0,0 +1,201 @@ +* Samsung Exynos5420 Clock Controller + +The Exynos5420 clock controller generates and supplies clock to various +controllers within the Exynos5420 SoC. + +Required Properties: + +- comptible: should be one of the following. + - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +The following is the list of clocks generated by the controller. Each clock is +assigned an identifier and client nodes use this identifier to specify the +clock which they consume. + + + [Core Clocks] + + Clock ID + ---------------------------- + + fin_pll 1 + + [Clock Gate for Special Clocks] + + Clock ID + ---------------------------- + sclk_uart0 128 + sclk_uart1 129 + sclk_uart2 130 + sclk_uart3 131 + sclk_mmc0 132 + sclk_mmc1 133 + sclk_mmc2 134 + sclk_spi0 135 + sclk_spi1 136 + sclk_spi2 137 + sclk_i2s1 138 + sclk_i2s2 139 + sclk_pcm1 140 + sclk_pcm2 141 + sclk_spdif 142 + sclk_hdmi 143 + sclk_pixel 144 + sclk_dp1 145 + sclk_mipi1 146 + sclk_fimd1 147 + sclk_maudio0 148 + sclk_maupcm0 149 + sclk_usbd300 150 + sclk_usbd301 151 + sclk_usbphy300 152 + sclk_usbphy301 153 + sclk_unipro 154 + sclk_pwm 155 + sclk_gscl_wa 156 + sclk_gscl_wb 157 + + [Peripheral Clock Gates] + + Clock ID + ---------------------------- + + aclk66_peric 256 + uart0 257 + uart1 258 + uart2 259 + uart3 260 + i2c0 261 + i2c1 262 + i2c2 263 + i2c3 264 + i2c4 265 + i2c5 266 + i2c6 267 + i2c7 268 + i2c_hdmi 269 + tsadc 270 + spi0 271 + spi1 272 + spi2 273 + keyif 274 + i2s1 275 + i2s2 276 + pcm1 277 + pcm2 278 + pwm 279 + spdif 280 + i2c8 281 + i2c9 282 + i2c10 283 + aclk66_psgen 300 + chipid 301 + sysreg 302 + tzpc0 303 + tzpc1 304 + tzpc2 305 + tzpc3 306 + tzpc4 307 + tzpc5 308 + tzpc6 309 + tzpc7 310 + tzpc8 311 + tzpc9 312 + hdmi_cec 313 + seckey 314 + mct 315 + wdt 316 + rtc 317 + tmu 318 + tmu_gpu 319 + pclk66_gpio 330 + aclk200_fsys2 350 + mmc0 351 + mmc1 352 + mmc2 353 + sromc 354 + ufs 355 + aclk200_fsys 360 + tsi 361 + pdma0 362 + pdma1 363 + rtic 364 + usbh20 365 + usbd300 366 + usbd301 377 + aclk400_mscl 380 + mscl0 381 + mscl1 382 + mscl2 383 + smmu_mscl0 384 + smmu_mscl1 385 + smmu_mscl2 386 + aclk333 400 + mfc 401 + smmu_mfcl 402 + smmu_mfcr 403 + aclk200_disp1 410 + dsim1 411 + dp1 412 + hdmi 413 + aclk300_disp1 420 + fimd1 421 + smmu_fimd1 422 + aclk166 430 + mixer 431 + aclk266 440 + rotator 441 + mdma1 442 + smmu_rotator 443 + smmu_mdma1 444 + aclk300_jpeg 450 + jpeg 451 + jpeg2 452 + smmu_jpeg 453 + aclk300_gscl 460 + smmu_gscl0 461 + smmu_gscl1 462 + gscl_wa 463 + gscl_wb 464 + gscl0 465 + gscl1 466 + clk_3aa 467 + aclk266_g2d 470 + sss 471 + slim_sss 472 + mdma0 473 + aclk333_g2d 480 + g2d 481 + aclk333_432_gscl 490 + smmu_3aa 491 + smmu_fimcl0 492 + smmu_fimcl1 493 + smmu_fimcl3 494 + fimc_lite3 495 + aclk_g3d 500 + g3d 501 + +Example 1: An example of a clock controller node is listed below. + + clock: clock-controller@0x10010000 { + compatible = "samsung,exynos5420-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + +Example 2: UART controller node that consumes the clock generated by the clock + controller. Refer to the standard clock bindings for information + about 'clocks' and 'clock-names' property. + + serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 54 0>; + clocks = <&clock 259>, <&clock 130>; + clock-names = "uart", "clk_uart_baud0"; + }; diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt index 2b14a940eb75..3f454ffc654a 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt +++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt @@ -10,11 +10,16 @@ Required properties: mapped region. - interrupts : G2D interrupt number to the CPU. + - clocks : from common clock binding: handle to G2D clocks. + - clock-names : from common clock binding: must contain "sclk_fimg2d" and + "fimg2d", corresponding to entries in the clocks property. Example: g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt index bf0182d8da25..df37b0230c75 100644 --- a/Documentation/devicetree/bindings/media/s5p-mfc.txt +++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt @@ -15,6 +15,9 @@ Required properties: mapped region. - interrupts : MFC interrupt number to the CPU. + - clocks : from common clock binding: handle to mfc clocks. + - clock-names : from common clock binding: must contain "sclk_mfc" and "mfc", + corresponding to entries in the clocks property. - samsung,mfc-r : Base address of the first memory bank used by MFC for DMA contiguous memory allocation and its size. @@ -34,6 +37,8 @@ mfc: codec@13400000 { reg = <0x13400000 0x10000>; interrupts = <0 94 0>; samsung,power-domain = <&pd_mfc>; + clocks = <&clock 170>, <&clock 273>; + clock-names = "sclk_mfc", "mfc"; }; Board specific DT entry: diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index c70fca146e91..e15cfc4bb39e 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -21,8 +21,18 @@ Required Properties: - gpio-controller: identifies the node as a gpio controller and pin bank. - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See generic - GPIO binding documentation for description of particular cells. + binding is used, the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + + Eg: <&gpx2 6 0> + <[phandle of the gpio controller node] + [pin number within the gpio controller] + [flags]> + + Values for gpio specifier: + - Pin number: is a value between 0 to 7. + - Flags: 0 - Active High + 1 - Active Low - Pin mux/config groups as child nodes: The pin mux (selecting pin function mode) and pin config (pull up/down, driver strength) settings are represented @@ -266,3 +276,33 @@ Example 4: Set up the default pin state for uart controller. pinctrl = devm_pinctrl_get_select_default(&pdev->dev); } + +Example 5: A display port client node that supports 'default' pinctrl state + and gpio binding. + + display-port-controller { + /* ... */ + + samsung,hpd-gpio = <&gpx2 6 0>; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + }; + +Example 6: Request the gpio for display port controller + + static int exynos_dp_probe(struct platform_device *pdev) + { + int hpd_gpio, ret; + struct device *dev = &pdev->dev; + struct device_node *dp_node = dev->of_node; + + /* ... */ + + hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0); + + /* ... */ + + ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN, + "hpd_gpio"); + /* ... */ + } diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt index 3070046da2e5..025e66b85a43 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt @@ -8,6 +8,16 @@ Required SoC Specific Properties: - dmas: list of DMA controller phandle and DMA request line ordered pairs. - dma-names: identifier string for each DMA request line in the dmas property. These strings correspond 1:1 with the ordered pairs in dmas. +- clocks: Handle to iis clock and RCLK source clk. +- clock-names: + i2s0 uses some base clks from CMU and some are from audio subsystem internal + clock controller. The clock names for i2s0 should be "iis", "i2s_opclk0" and + "i2s_opclk1" as shown in the example below. + i2s1 and i2s2 uses clocks from CMU. The clock names for i2s1 and i2s2 should + be "iis" and "i2s_opclk0". + "iis" is the i2s bus clock and i2s_opclk0, i2s_opclk1 are sources of the root + clk. i2s0 has internal mux to select the source of root clk and i2s1 and i2s2 + doesn't have any such mux. Optional SoC Specific Properties: @@ -20,44 +30,26 @@ Optional SoC Specific Properties: then this flag is enabled. - samsung,idma-addr: Internal DMA register base address of the audio sub system(used in secondary sound source). - -Required Board Specific Properties: - -- gpios: The gpio specifier for data out,data in, LRCLK, CDCLK and SCLK - interface lines. The format of the gpio specifier depends on the gpio - controller. - The syntax of samsung gpio specifier is - <[phandle of the gpio controller node] - [pin number within the gpio controller] - [mux function] - [flags and pull up/down] - [drive strength]> +- pinctrl-0: Should specify pin control groups used for this controller. +- pinctrl-names: Should contain only one value - "default". Example: -- SoC Specific Portion: - -i2s@03830000 { +i2s0: i2s@03830000 { compatible = "samsung,i2s-v5"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 &pdma0 9 &pdma0 8>; dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; samsung,supports-6ch; samsung,supports-rstclr; samsung,supports-secdai; samsung,idma-addr = <0x03000000>; -}; - -- Board Specific Portion: - -i2s@03830000 { - gpios = <&gpz 0 2 0 0>, /* I2S_0_SCLK */ - <&gpz 1 2 0 0>, /* I2S_0_CDCLK */ - <&gpz 2 2 0 0>, /* I2S_0_LRCK */ - <&gpz 3 2 0 0>, /* I2S_0_SDI */ - <&gpz 4 2 0 0>, /* I2S_0_SDO[1] */ - <&gpz 5 2 0 0>, /* I2S_0_SDO[2] */ - <&gpz 6 2 0 0>; /* I2S_0_SDO[3] */ + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; }; diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index b3abde736017..d967ba16de60 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -48,3 +48,37 @@ Example: clocks = <&clock 285>; clock-names = "usbhost"; }; + +DWC3 +Required properties: + - compatible: should be "samsung,exynos5250-dwusb3" for USB 3.0 DWC3 + controller. + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - ranges: allows valid 1:1 translation between child's address space and + parent's address space + - clocks: Clock IDs array as required by the controller. + - clock-names: names of clocks correseponding to IDs in the clock property + +Sub-nodes: +The dwc3 core should be added as subnode to Exynos dwc3 glue. +- dwc3 : + The binding details of dwc3 can be found in: + Documentation/devicetree/bindings/usb/dwc3.txt + +Example: + usb@12000000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock 286>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "synopsys,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + usb-phy = <&usb2_phy &usb3_phy>; + }; + }; diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt index c60da67a5d76..84f10c16cb38 100644 --- a/Documentation/devicetree/bindings/video/exynos_dp.txt +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt @@ -21,6 +21,10 @@ Required properties for dp-controller: of memory mapped region. -interrupts: interrupt combiner values. + -clocks: + from common clock binding: handle to dp clock. + -clock-names: + from common clock binding: Shall be "dp". -interrupt-parent: phandle to Interrupt combiner node. -samsung,color-space: @@ -61,6 +65,8 @@ SOC specific portion: reg = <0x145b0000 0x10000>; interrupts = <10 3>; interrupt-parent = <&combiner>; + clocks = <&clock 342>; + clock-names = "dp"; dptx-phy { reg = <0x10040720>; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f0895c581a89..13575103594d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -57,6 +57,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5440-sd5v1.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5420-smdk5420.dtb \ exynos5440-ssdk5440.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb @@ -159,6 +160,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ hrefprev60.dtb \ hrefv60plus.dtb \ ccu9540.dtb +dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 359694c78918..3f94fe8e3706 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -19,7 +19,7 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { interrupt-parent = <&gic>; @@ -160,6 +160,8 @@ reg = <0x13400000 0x10000>; interrupts = <0 94 0>; samsung,power-domain = <&pd_mfc>; + clocks = <&clock 170>, <&clock 273>; + clock-names = "sclk_mfc", "mfc"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 524b90846df5..382d8c7e2906 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4210"; @@ -41,6 +41,10 @@ enable-active-high; }; + tmu@100C0000 { + status = "okay"; + }; + sdhci@12530000 { bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; @@ -83,6 +87,150 @@ status = "okay"; }; + i2c@13860000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx0>; + interrupts = <4 0>, <3 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>; + max8997,pmic-buck2-dvs-voltage = <1100000>; + max8997,pmic-buck5-dvs-voltage = <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VMIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_RTC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_AUD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "DVDD_SWB_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_PLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_AUD_3V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "AVDD18_SWB_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDD_SWB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_ARM_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_INT_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_G3D_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_LCD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -143,4 +291,25 @@ clock-frequency = <24000000>; }; }; + + fimd@11c00000 { + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; + pinctrl-names = "default"; + status = "okay"; + }; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <50000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <64>; + hback-porch = <16>; + hsync-len = <48>; + vback-porch = <64>; + vfront-porch = <16>; + vsync-len = <3>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 55a2efb763d1..553bceae8967 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -330,6 +330,95 @@ samsung,pin-pud = <3>; samsung,pin-drv = <0>; }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_sync: lcd-sync { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_en: lcd-en { + samsung,pins = "gpe3-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data16: lcd-data-width16 { + samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2", + "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0", + "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data18: lcd-data-width18 { + samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1", + "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", + "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; pinctrl@11000000 { diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 91332b72acf5..9c01b718d29d 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung smdkv310 evaluation board based on Exynos4210"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 9a14484c7bb1..94eebffe3044 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Trats based on Exynos4210"; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 345cdb51dcb7..889cdada1ce9 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Universal C210 based on Exynos4210 rev0"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 54710de82908..b7f358a93bcb 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -19,8 +19,8 @@ * published by the Free Software Foundation. */ -/include/ "exynos4.dtsi" -/include/ "exynos4210-pinctrl.dtsi" +#include "exynos4.dtsi" +#include "exynos4210-pinctrl.dtsi" / { compatible = "samsung,exynos4210"; @@ -112,12 +112,17 @@ interrupt-parent = <&combiner>; reg = <0x100C0000 0x100>; interrupts = <2 4>; + clocks = <&clock 383>; + clock-names = "tmu_apbif"; + status = "disabled"; }; g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index c0f60f49cea6..6f34d7f6ba7e 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -17,7 +17,7 @@ * published by the Free Software Foundation. */ -/include/ "exynos4x12.dtsi" +#include "exynos4x12.dtsi" / { compatible = "samsung,exynos4212"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 53bc8bf77984..46c678ee119c 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Hardkernel ODROID-X board based on Exynos4412"; @@ -43,6 +43,7 @@ #size-cells = <0>; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; + vmmc-supply = <&ldo20_reg &buck8_reg>; status = "okay"; num-slots = <1>; @@ -78,6 +79,7 @@ bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; pinctrl-names = "default"; + vmmc-supply = <&ldo4_reg &ldo21_reg>; status = "okay"; }; @@ -108,4 +110,199 @@ clock-frequency = <24000000>; }; }; + + i2c@13860000 { + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + max77686: pmic@09 { + compatible = "maxim,max77686"; + reg = <0x09>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M1_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDDQ_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_MMC2_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDDQ_MMC1_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD33_USB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_HSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "LDO20_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "LDO21_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo25_reg: LDO25 { + regulator-name = "VDDQ_LCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-microvolt-offset = <50000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_CKEM1_2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "BUCK6_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "BUCK7_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "BUCK8_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 1c21bad32ca9..7993641cb32a 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4412"; @@ -36,6 +36,72 @@ enable-active-high; }; + pinctrl@11000000 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + keypad@100A0000 { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <2>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; + status = "okay"; + + key_home { + keypad,row = <0>; + keypad,column = <0>; + linux,code = <102>; + }; + + key_down { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <108>; + }; + + key_up { + keypad,row = <1>; + keypad,column = <0>; + linux,code = <103>; + }; + + key_menu { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <139>; + }; + + key_back { + keypad,row = <2>; + keypad,column = <0>; + linux,code = <158>; + }; + + key_enter { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <28>; + }; + }; + + g2d@10800000 { + status = "okay"; + }; + sdhci@12530000 { bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index dd564310d4a5..ad316a1ee9e0 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Samsung SMDK evaluation board based on Exynos4412"; @@ -31,8 +31,91 @@ status = "okay"; }; - g2d@10800000 { + pinctrl@11000000 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", + "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + keypad@100A0000 { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; status = "okay"; + + key_1 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <2>; + }; + + key_2 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <3>; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <4>; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <5>; + }; + + key_5 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <6>; + }; + + key_A { + keypad,row = <2>; + keypad,column = <6>; + linux,code = <30>; + }; + + key_B { + keypad,row = <2>; + keypad,column = <7>; + linux,code = <48>; + }; + + key_C { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <46>; + }; + + key_D { + keypad,row = <2>; + keypad,column = <5>; + linux,code = <32>; + }; + + key_E { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <18>; + }; }; sdhci@12530000 { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 270b389e0a1b..e743e677a9e2 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -17,7 +17,7 @@ * published by the Free Software Foundation. */ -/include/ "exynos4x12.dtsi" +#include "exynos4x12.dtsi" / { compatible = "samsung,exynos4412"; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 099cec79e2ae..704290f7c5c0 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -778,62 +778,6 @@ samsung,pin-drv = <3>; }; - keypad_col0: keypad-col0 { - samsung,pins = "gpl2-0"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col1: keypad-col1 { - samsung,pins = "gpl2-1"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col2: keypad-col2 { - samsung,pins = "gpl2-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col3: keypad-col3 { - samsung,pins = "gpl2-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col4: keypad-col4 { - samsung,pins = "gpl2-4"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col5: keypad-col5 { - samsung,pins = "gpl2-5"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col6: keypad-col6 { - samsung,pins = "gpl2-6"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col7: keypad-col7 { - samsung,pins = "gpl2-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - cam_port_b: cam-port-b { samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index e3380a7a285c..01da194ba329 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -17,8 +17,8 @@ * published by the Free Software Foundation. */ -/include/ "exynos4.dtsi" -/include/ "exynos4x12-pinctrl.dtsi" +#include "exynos4.dtsi" +#include "exynos4x12-pinctrl.dtsi" / { aliases { @@ -28,14 +28,6 @@ pinctrl3 = &pinctrl_3; }; - combiner:interrupt-controller@10440000 { - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>; - }; - clock: clock-controller@0x10030000 { compatible = "samsung,exynos4412-clock"; reg = <0x10030000 0x20000>; @@ -77,6 +69,8 @@ compatible = "samsung,exynos4212-g2d"; reg = <0x10800000 0x1000>; interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi new file mode 100644 index 000000000000..f65e124c04a6 --- /dev/null +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -0,0 +1,111 @@ +/* + * Samsung's Exynos5 SoC series common device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular + * SoCs from Exynos5 series can include this file and provide values for SoCs + * specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; + + gic:interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + dwmmc_0: dwmmc0@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc_1: dwmmc1@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc_2: dwmmc2@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 51 0>; + }; + + serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 52 0>; + }; + + serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 53 0>; + }; + + serial@12C30000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C30000 0x100>; + interrupts = <0 54 0>; + }; + + rtc { + compatible = "samsung,s3c6410-rtc"; + reg = <0x101E0000 0x100>; + interrupts = <0 43 0>, <0 44 0>; + status = "disabled"; + }; + + watchdog { + compatible = "samsung,s3c2410-wdt"; + reg = <0x101D0000 0x100>; + interrupts = <0 42 0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 02cfc76d002f..abc7272c7afd 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -449,4 +449,35 @@ clock-frequency = <24000000>; }; }; + + dp-controller { + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + }; + + fimd: fimd@14400000 { + display-timings { + native-mode = <&timing0>; + timing0: timing@0 { + /* 2560x1600 DP panel */ + clock-frequency = <50000>; + hactive = <2560>; + vactive = <1600>; + hfront-porch = <48>; + hback-porch = <80>; + hsync-len = <32>; + vback-porch = <16>; + vfront-porch = <8>; + vsync-len = <6>; + }; + }; + }; + + rtc { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index d1650fb34c0a..e9cdee385092 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -553,6 +553,13 @@ samsung,pin-pud = <0>; samaung,pin-drv = <0>; }; + + dp_hpd: dp_hpd { + samsung,pins = "gpx0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; }; pinctrl@13400000 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 3e0c792e2767..35a66dee4011 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; @@ -37,6 +37,30 @@ }; }; + vdd:fixed-regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + dbvdd:fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "dbvdd-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + spkvdd:fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "spkvdd-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; @@ -47,8 +71,17 @@ }; wm8994: wm8994@1a { - compatible = "wlf,wm8994"; - reg = <0x1a>; + compatible = "wlf,wm8994"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + + AVDD2-supply = <&vdd>; + CPVDD-supply = <&vdd>; + DBVDD-supply = <&dbvdd>; + SPKVDD1-supply = <&spkvdd>; + SPKVDD2-supply = <&spkvdd>; }; }; @@ -224,6 +257,9 @@ samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <4>; + + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; }; display-timings { diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index d449feb7e143..e79331dba12d 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -9,8 +9,8 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" -/include/ "cros5250-common.dtsi" +#include "exynos5250.dtsi" +#include "cros5250-common.dtsi" / { model = "Google Snow"; @@ -171,6 +171,10 @@ }; }; + rtc { + status = "okay"; + }; + /* * On Snow we've got SIP WiFi and so can keep drive strengths low to * reduce EMI. diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 0673524238a6..d04ab0ad791a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -17,12 +17,13 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" -/include/ "exynos5250-pinctrl.dtsi" +#include "exynos5.dtsi" +#include "exynos5250-pinctrl.dtsi" + +#include <dt-bindings/clk/exynos-audss-clk.h> / { compatible = "samsung,exynos5250"; - interrupt-parent = <&gic>; aliases { spi0 = &spi_0; @@ -51,9 +52,20 @@ pinctrl3 = &pinctrl_3; }; - chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; }; pd_gsc: gsc-power-domain@0x10044000 { @@ -72,15 +84,10 @@ #clock-cells = <1>; }; - gic:interrupt-controller@10481000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, - <0x10484000 0x2000>, - <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; }; timer { @@ -91,22 +98,6 @@ <1 10 0xf08>; }; - combiner:interrupt-controller@10440000 { - compatible = "samsung,exynos4210-combiner"; - #interrupt-cells = <2>; - interrupt-controller; - samsung,combiner-nr = <32>; - reg = <0x10440000 0x1000>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; - }; - mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; @@ -168,9 +159,6 @@ }; watchdog { - compatible = "samsung,s3c2410-wdt"; - reg = <0x101D0000 0x100>; - interrupts = <0 42 0>; clocks = <&clock 336>; clock-names = "watchdog"; }; @@ -183,12 +171,8 @@ }; rtc { - compatible = "samsung,s3c6410-rtc"; - reg = <0x101E0000 0x100>; - interrupts = <0 43 0>, <0 44 0>; clocks = <&clock 337>; clock-names = "rtc"; - status = "disabled"; }; tmu@10060000 { @@ -200,33 +184,21 @@ }; serial@12C00000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C00000 0x100>; - interrupts = <0 51 0>; clocks = <&clock 289>, <&clock 146>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C10000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C10000 0x100>; - interrupts = <0 52 0>; clocks = <&clock 290>, <&clock 147>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C20000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C20000 0x100>; - interrupts = <0 53 0>; clocks = <&clock 291>, <&clock 148>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C30000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C30000 0x100>; - interrupts = <0 54 0>; clocks = <&clock 292>, <&clock 149>; clock-names = "uart", "clk_uart_baud0"; }; @@ -405,31 +377,19 @@ }; dwmmc_0: dwmmc0@12200000 { - compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12200000 0x1000>; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&clock 280>, <&clock 139>; clock-names = "biu", "ciu"; }; dwmmc_1: dwmmc1@12210000 { - compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12210000 0x1000>; - interrupts = <0 76 0>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&clock 281>, <&clock 140>; clock-names = "biu", "ciu"; }; dwmmc_2: dwmmc2@12220000 { - compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12220000 0x1000>; - interrupts = <0 77 0>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&clock 282>, <&clock 141>; clock-names = "biu", "ciu"; }; @@ -451,6 +411,10 @@ &pdma0 9 &pdma0 8>; dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; samsung,supports-6ch; samsung,supports-rstclr; samsung,supports-secdai; @@ -465,6 +429,8 @@ dmas = <&pdma1 12 &pdma1 11>; dma-names = "tx", "rx"; + clocks = <&clock 307>, <&clock 157>; + clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; }; @@ -475,10 +441,42 @@ dmas = <&pdma0 12 &pdma0 11>; dma-names = "tx", "rx"; + clocks = <&clock 308>, <&clock 158>; + clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; }; + usb@12000000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock 286>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "synopsys,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + usb-phy = <&usb2_phy &usb3_phy>; + }; + }; + + usb3_phy: usbphy@12100000 { + compatible = "samsung,exynos5250-usb3phy"; + reg = <0x12100000 0x100>; + clocks = <&clock 1>, <&clock 286>; + clock-names = "ext_xtal", "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbphy-sys { + reg = <0x10040704 0x8>; + }; + }; + usb@12110000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; @@ -497,7 +495,7 @@ clock-names = "usbhost"; }; - usbphy@12130000 { + usb2_phy: usbphy@12130000 { compatible = "samsung,exynos5250-usb2phy"; reg = <0x12130000 0x100>; clocks = <&clock 1>, <&clock 285>; @@ -621,6 +619,8 @@ reg = <0x145b0000 0x1000>; interrupts = <10 3>; interrupt-parent = <&combiner>; + clocks = <&clock 342>; + clock-names = "dp"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts new file mode 100644 index 000000000000..08607df6a180 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -0,0 +1,33 @@ +/* + * SAMSUNG SMDK5420 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5420.dtsi" + +/ { + model = "Samsung SMDK5420 board based on EXYNOS5420"; + compatible = "samsung,smdk5420", "samsung,exynos5420"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200 init=/linuxrc"; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi new file mode 100644 index 000000000000..8474d63fc5e5 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -0,0 +1,103 @@ +/* + * SAMSUNG EXYNOS5420 SoC device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file. + * EXYNOS5420 based board files can include this file and provide + * values for board specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos5.dtsi" +/ { + compatible = "samsung,exynos5420"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + clock-frequency = <1800000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + clock-frequency = <1800000000>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + clock-frequency = <1800000000>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + clock-frequency = <1800000000>; + }; + }; + + clock: clock-controller@0x10010000 { + compatible = "samsung,exynos5420-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + + mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0x800>; + interrupt-controller; + #interrups-cells = <1>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>; + clocks = <&clock 1>, <&clock 315>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &combiner 23 3>, + <1 &combiner 23 4>, + <2 &combiner 25 2>, + <3 &combiner 25 3>, + <4 &gic 0 120 0>, + <5 &gic 0 121 0>, + <6 &gic 0 122 0>, + <7 &gic 0 123 0>; + }; + }; + + serial@12C00000 { + clocks = <&clock 257>, <&clock 128>; + clock-names = "uart", "clk_uart_baud0"; + }; + + serial@12C10000 { + clocks = <&clock 258>, <&clock 129>; + clock-names = "uart", "clk_uart_baud0"; + }; + + serial@12C20000 { + clocks = <&clock 259>, <&clock 130>; + clock-names = "uart", "clk_uart_baud0"; + }; + + serial@12C30000 { + clocks = <&clock 260>, <&clock 131>; + clock-names = "uart", "clk_uart_baud0"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts index ef747b52b674..5b22508050da 100644 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -10,14 +10,14 @@ */ /dts-v1/; -/include/ "exynos5440.dtsi" +#include "exynos5440.dtsi" / { model = "SAMSUNG SD5v1 board based on EXYNOS5440"; compatible = "samsung,sd5v1", "samsung,exynos5440"; chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index d55042beb5c5..f32cd77930a6 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -10,18 +10,53 @@ */ /dts-v1/; -/include/ "exynos5440.dtsi" +#include "exynos5440.dtsi" / { model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; compatible = "samsung,ssdk5440", "samsung,exynos5440"; chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; - spi { - status = "disabled"; + spi_0: spi@D0000 { + + flash: w25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128"; + spi-max-frequency = <15625000>; + reg = <0>; + controller-data { + samsung,spi-feedback-delay = <0>; + }; + + partition@00000 { + label = "BootLoader"; + reg = <0x60000 0x80000>; + read-only; + }; + + partition@e0000 { + label = "Recovery-Kernel"; + reg = <0xe0000 0x300000>; + read-only; + }; + + partition@3e0000 { + label = "CRAM-FS"; + reg = <0x3e0000 0x700000>; + read-only; + }; + + partition@ae0000 { + label = "User-Data"; + reg = <0xae0000 0x520000>; + }; + + }; + }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index f6b1c8973845..8b6f8f0c9171 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -9,13 +9,17 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "samsung,exynos5440"; interrupt-parent = <&gic>; + aliases { + spi0 = &spi_0; + }; + clock: clock-controller@0x160000 { compatible = "samsung,exynos5440-clock"; reg = <0x160000 0x1000>; @@ -79,8 +83,13 @@ interrupts = <0 57 0>; operating-points = < /* KHz uV */ + 1500000 1100000 + 1400000 1075000 + 1300000 1050000 1200000 1025000 + 1100000 1000000 1000000 975000 + 900000 950000 800000 925000 >; }; @@ -101,14 +110,14 @@ clock-names = "uart", "clk_uart_baud0"; }; - spi { - compatible = "samsung,exynos4210-spi"; - reg = <0xD0000 0x1000>; + spi_0: spi@D0000 { + compatible = "samsung,exynos5440-spi"; + reg = <0xD0000 0x100>; interrupts = <0 4 0>; - tx-dma-channel = <&pdma0 5>; /* preliminary */ - rx-dma-channel = <&pdma0 4>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + samsung,spi-src-clk = <0>; + num-cs = <1>; clocks = <&clock 21>, <&clock 16>; clock-names = "spi", "spi_busclk0"; }; @@ -184,28 +193,6 @@ compatible = "arm,amba-bus"; interrupt-parent = <&gic>; ranges; - - pdma0: pdma@00121000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121000 0x1000>; - interrupts = <0 46 0>; - clocks = <&clock 8>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@00120000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x120000 0x1000>; - interrupts = <0 47 0>; - clocks = <&clock 8>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; }; rtc { @@ -214,6 +201,29 @@ interrupts = <0 17 0>, <0 16 0>; clocks = <&clock 21>; clock-names = "rtc"; - status = "disabled"; + }; + + sata@210000 { + compatible = "snps,exynos5440-ahci"; + reg = <0x210000 0x10000>; + interrupts = <0 30 0>; + clocks = <&clock 23>; + clock-names = "sata"; + }; + + ohci@220000 { + compatible = "samsung,exynos5440-ohci"; + reg = <0x220000 0x1000>; + interrupts = <0 29 0>; + clocks = <&clock 24>; + clock-names = "usbhost"; + }; + + ehci@221000 { + compatible = "samsung,exynos5440-ehci"; + reg = <0x221000 0x1000>; + interrupts = <0 29 0>; + clocks = <&clock 24>; + clock-names = "usbhost"; }; }; diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi new file mode 100644 index 000000000000..527e3193817f --- /dev/null +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi @@ -0,0 +1,173 @@ +/* + * Samsung S3C2416 pinctrl settings + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&pinctrl_0 { + /* + * Pin banks + */ + + gpa: gpa { + gpio-controller; + #gpio-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc: gpc { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd: gpd { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe: gpe { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf: gpf { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg: gpg { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph: gph { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj: gpj { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk: gpk { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl: gpl { + gpio-controller; + #gpio-cells = <2>; + }; + + gpm: gpm { + gpio-controller; + #gpio-cells = <2>; + }; + + /* + * Pin groups + */ + + uart0_data: uart0-data { + samsung,pins = "gph-0", "gph-1"; + samsung,pin-function = <2>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gph-8", "gph-9"; + samsung,pin-function = <2>; + }; + + uart1_data: uart1-data { + samsung,pins = "gph-2", "gph-3"; + samsung,pin-function = <2>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gph-10", "gph-11"; + samsung,pin-function = <2>; + }; + + uart2_data: uart2-data { + samsung,pins = "gph-4", "gph-5"; + samsung,pin-function = <2>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gph-6", "gph-7"; + samsung,pin-function = <2>; + }; + + uart3_data: uart3-data { + samsung,pins = "gph-6", "gph-7"; + samsung,pin-function = <2>; + }; + + extuart_clk: extuart-clk { + samsung,pins = "gph-12"; + samsung,pin-function = <2>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpe-14", "gpe-15"; + samsung,pin-function = <2>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpe-11", "gpe-12", "gpe-13"; + samsung,pin-function = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpe-5"; + samsung,pin-function = <2>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpe-6"; + samsung,pin-function = <2>; + }; + + sd0_bus1: sd0-bus1 { + samsung,pins = "gpe-7"; + samsung,pin-function = <2>; + }; + + sd0_bus4: sd0-bus4 { + samsung,pins = "gpe-8", "gpe-9", "gpe-10"; + samsung,pin-function = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpl-8"; + samsung,pin-function = <2>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpl-9"; + samsung,pin-function = <2>; + }; + + sd1_bus1: sd1-bus1 { + samsung,pins = "gpl-0"; + samsung,pin-function = <2>; + }; + + sd1_bus4: sd1-bus4 { + samsung,pins = "gpl-1", "gpl-2", "gpl-3"; + samsung,pin-function = <2>; + }; +}; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts new file mode 100644 index 000000000000..59594cf15998 --- /dev/null +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -0,0 +1,72 @@ +/* + * SAMSUNG SMDK2416 board device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "s3c2416.dtsi" + +/ { + model = "SMDK2416"; + compatible = "samsung,s3c2416"; + + memory { + reg = <0x30000000 0x4000000>; + }; + + serial@50000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data>, <&uart0_fctl>; + }; + + serial@50004000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>, <&uart1_fctl>; + }; + + serial@50008000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; + }; + + serial@5000C000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_data>; + }; + + watchdog@53000000 { + status = "okay"; + }; + + rtc@57000000 { + status = "okay"; + }; + + sdhci@4AC00000 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, + <&sd0_bus1>, <&sd0_bus4>; + bus-width = <4>; + cd-gpios = <&gpf 1 0>; + cd-inverted; + status = "okay"; + }; + + sdhci@4A800000 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, + <&sd1_bus1>, <&sd1_bus4>; + bus-width = <4>; + broken-cd; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi new file mode 100644 index 000000000000..e6555bdd81b8 --- /dev/null +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -0,0 +1,79 @@ +/* + * Samsung's S3C2416 SoC device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "s3c24xx.dtsi" +#include "s3c2416-pinctrl.dtsi" + +/ { + model = "Samsung S3C2416 SoC"; + compatible = "samsung,s3c2416"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ejs"; + }; + }; + + interrupt-controller@4a000000 { + compatible = "samsung,s3c2416-irq"; + }; + + pinctrl@56000000 { + compatible = "samsung,s3c2416-pinctrl"; + }; + + serial@50000000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@50008000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@5000C000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x5000C000 0x4000>; + interrupts = <1 18 24 4>, <1 18 25 4>; + status = "disabled"; + }; + + sdhci@4AC00000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x4AC00000 0x100>; + interrupts = <0 0 21 3>; + status = "disabled"; + }; + + sdhci@4A800000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x4A800000 0x100>; + interrupts = <0 0 20 3>; + status = "disabled"; + }; + + watchdog@53000000 { + interrupts = <1 9 27 3>; + }; + + rtc@57000000 { + compatible = "samsung,s3c2416-rtc"; + }; + + i2c@54000000 { + compatible = "samsung,s3c2440-i2c"; + }; +}; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi new file mode 100644 index 000000000000..2d1d7dc9418a --- /dev/null +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -0,0 +1,92 @@ +/* + * Samsung's S3C24XX family device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" + +/ { + compatible = "samsung,s3c24xx"; + interrupt-parent = <&intc>; + + aliases { + pinctrl0 = &pinctrl_0; + }; + + intc:interrupt-controller@4a000000 { + compatible = "samsung,s3c2410-irq"; + reg = <0x4a000000 0x100>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + pinctrl_0: pinctrl@56000000 { + reg = <0x56000000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,s3c2410-wakeup-eint"; + interrupts = <0 0 0 3>, + <0 0 1 3>, + <0 0 2 3>, + <0 0 3 3>, + <0 0 4 4>, + <0 0 5 4>; + }; + }; + + timer@51000000 { + compatible = "samsung,s3c2410-pwm"; + reg = <0x51000000 0x1000>; + interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>; + #pwm-cells = <4>; + }; + + serial@50000000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50000000 0x4000>; + interrupts = <1 28 0 4>, <1 28 1 4>; + status = "disabled"; + }; + + serial@50004000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + status = "disabled"; + }; + + serial@50008000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50008000 0x4000>; + interrupts = <1 15 6 4>, <1 15 7 4>; + status = "disabled"; + }; + + watchdog@53000000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0x53000000 0x100>; + interrupts = <0 0 9 3>; + status = "disabled"; + }; + + rtc@57000000 { + compatible = "samsung,s3c2410-rtc"; + reg = <0x57000000 0x100>; + interrupts = <0 0 30 3>, <0 0 8 3>; + status = "disabled"; + }; + + i2c@54000000 { + compatible = "samsung,s3c2410-i2c"; + reg = <0x54000000 0x100>; + interrupts = <0 0 27 3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index ff18fc2ea46f..5ae41ecb0a02 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -71,6 +71,16 @@ config SOC_EXYNOS5250 help Enable EXYNOS5250 SoC support +config SOC_EXYNOS5420 + bool "SAMSUNG EXYNOS5420" + default y + depends on ARCH_EXYNOS5 + select PM_GENERIC_DOMAINS if PM + select S5P_PM if PM + select S5P_SLEEP if PM + help + Enable EXYNOS5420 SoC support + config SOC_EXYNOS5440 bool "SAMSUNG EXYNOS5440" default y diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index f7e504b7874d..8bc587cb165a 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -64,6 +64,7 @@ static const char name_exynos4210[] = "EXYNOS4210"; static const char name_exynos4212[] = "EXYNOS4212"; static const char name_exynos4412[] = "EXYNOS4412"; static const char name_exynos5250[] = "EXYNOS5250"; +static const char name_exynos5420[] = "EXYNOS5420"; static const char name_exynos5440[] = "EXYNOS5440"; static void exynos4_map_io(void); @@ -103,6 +104,12 @@ static struct cpu_table cpu_ids[] __initdata = { .init = exynos_init, .name = name_exynos5250, }, { + .idcode = EXYNOS5420_SOC_ID, + .idmask = EXYNOS5_SOC_MASK, + .map_io = exynos5_map_io, + .init = exynos_init, + .name = name_exynos5420, + }, { .idcode = EXYNOS5440_SOC_ID, .idmask = EXYNOS5_SOC_MASK, .map_io = exynos5440_map_io, @@ -322,10 +329,10 @@ void exynos5_restart(char mode, const char *cmd) u32 val; void __iomem *addr; - if (of_machine_is_compatible("samsung,exynos5250")) { - val = 0x1; - addr = EXYNOS_SWRESET; - } else if (of_machine_is_compatible("samsung,exynos5440")) { + val = 0x1; + addr = EXYNOS_SWRESET; + + if (of_machine_is_compatible("samsung,exynos5440")) { u32 status; np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); @@ -336,9 +343,6 @@ void exynos5_restart(char mode, const char *cmd) val = __raw_readl(addr); val = (val & 0xffff0000) | (status & 0xffff); - } else { - pr_err("%s: cannot support non-DT\n", __func__); - return; } __raw_writel(val, addr); diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h index 2979995d5a6a..1937e0fb7375 100644 --- a/arch/arm/mach-exynos/include/mach/uncompress.h +++ b/arch/arm/mach-exynos/include/mach/uncompress.h @@ -31,13 +31,12 @@ static void arch_detect_cpu(void) /* * product_id is bits 31:12 - * bits 23:20 describe the exynosX family - * + * bits 23:20 describe the exynosX family + * bits 27:24 describe the exynosX family in exynos5420 */ chip_id >>= 20; - chip_id &= 0xf; - if (chip_id == 0x5) + if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50) uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); else uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 753b94f3fca7..050a5b1247ef 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -57,6 +57,7 @@ static void __init exynos5_dt_machine_init(void) static char const *exynos5_dt_compat[] __initdata = { "samsung,exynos5250", + "samsung,exynos5420", "samsung,exynos5440", NULL }; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index a0e8ff7758a4..b2e8a5ebad40 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -50,6 +50,8 @@ static inline void __iomem *cpu_boot_reg(int cpu) boot_reg = cpu_boot_reg_base(); if (soc_is_exynos4412()) boot_reg += 4*cpu; + else if (soc_is_exynos5420()) + boot_reg += 4; return boot_reg; } @@ -180,10 +182,14 @@ static void __init exynos_smp_init_cpus(void) void __iomem *scu_base = scu_base_addr(); unsigned int i, ncores; - if (soc_is_exynos5250()) - ncores = 2; - else + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) ncores = scu_base ? scu_get_core_count(scu_base) : 1; + else + /* + * CPU Nodes are passed thru DT and set_cpu_possible + * is set by "arm_dt_init_cpu_maps". + */ + return; /* sanity check */ if (ncores > nr_cpu_ids) { diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index f2f7088bfd22..e52d5e42af4e 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -490,6 +490,18 @@ config MACH_SMDK2416 help Say Y here if you are using an SMDK2416 +config MACH_S3C2416_DT + bool "Samsung S3C2416 machine using devicetree" + select CLKSRC_OF + select USE_OF + select PINCTRL + select PINCTRL_S3C24XX + help + Machine support for Samsung S3C2416 machines with device tree enabled. + Select this if a fdt blob is available for the S3C2416 SoC based board. + Note: This is under development and not all peripherals can be supported + with this machine file. + endif # CPU_S3C2416 if CPU_S3C2440 diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 6f46ecfc8396..6de730bada4d 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -85,6 +85,7 @@ obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o +obj-$(CONFIG_MACH_S3C2416_DT) += mach-s3c2416-dt.o obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c new file mode 100644 index 000000000000..f50454a34f72 --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -0,0 +1,91 @@ +/* + * Samsung's S3C2416 flattened device tree enabled machine + * + * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> + * + * based on mach-exynos/mach-exynos4-dt.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/clocksource.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/regs-serial.h> + +#include "common.h" + +/* + * The following lookup table is used to override device names when devices + * are registered from device tree. This is temporarily added to enable + * device tree support addition for the S3C2416 architecture. + * + * For drivers that require platform data to be provided from the machine + * file, a platform data pointer can also be supplied along with the + * devices names. Usually, the platform data elements that cannot be parsed + * from the device tree by the drivers (example: function pointers) are + * supplied. But it should be noted that this is a temporary mechanism and + * at some point, the drivers should be capable of parsing all the platform + * data from the device tree. + */ +static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART, + "s3c2440-uart.0", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000, + "s3c2440-uart.1", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000, + "s3c2440-uart.2", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000, + "s3c2440-uart.3", NULL), + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, + "s3c-sdhci.0", NULL), + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1, + "s3c-sdhci.1", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC, + "s3c2440-i2c.0", NULL), + {}, +}; + +static void __init s3c2416_dt_map_io(void) +{ + s3c24xx_init_io(NULL, 0); + s3c24xx_init_clocks(12000000); +} + +static void __init s3c2416_dt_machine_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + s3c2416_auxdata_lookup, NULL); + + s3c_pm_init(); +} + +static char const *s3c2416_dt_compat[] __initdata = { + "samsung,s3c2416", + "samsung,s3c2450", + NULL +}; + +DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)") + /* Maintainer: Heiko Stuebner <heiko@sntech.de> */ + .dt_compat = s3c2416_dt_compat, + .map_io = s3c2416_dt_map_io, + .init_irq = irqchip_init, + .init_machine = s3c2416_dt_machine_init, + .init_time = clocksource_of_init, + .restart = s3c2416_restart, +MACHINE_END diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 989fefe18be6..4fb1f03a10d1 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -46,6 +46,7 @@ extern unsigned long samsung_cpu_id; #define EXYNOS4_CPU_MASK 0xFFFE0000 #define EXYNOS5250_SOC_ID 0x43520000 +#define EXYNOS5420_SOC_ID 0xE5420000 #define EXYNOS5440_SOC_ID 0xE5440000 #define EXYNOS5_SOC_MASK 0xFFFFF000 @@ -67,6 +68,7 @@ IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK) IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ @@ -142,6 +144,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_exynos5250() 0 #endif +#if defined(CONFIG_SOC_EXYNOS5420) +# define soc_is_exynos5420() is_samsung_exynos5420() +#else +# define soc_is_exynos5420() 0 +#endif + #if defined(CONFIG_SOC_EXYNOS5440) # define soc_is_exynos5440() is_samsung_exynos5440() #else diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index b7c232e67425..5d4d432cc4ac 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -5,4 +5,6 @@ obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o +obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o +obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c new file mode 100644 index 000000000000..9b1bbd52fd1f --- /dev/null +++ b/drivers/clk/samsung/clk-exynos-audss.c @@ -0,0 +1,133 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * Author: Padmavathi Venna <padma.v@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for Audio Subsystem Clock Controller. +*/ + +#include <linux/clkdev.h> +#include <linux/io.h> +#include <linux/clk-provider.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include <dt-bindings/clk/exynos-audss-clk.h> + +static DEFINE_SPINLOCK(lock); +static struct clk **clk_table; +static void __iomem *reg_base; +static struct clk_onecell_data clk_data; + +#define ASS_CLK_SRC 0x0 +#define ASS_CLK_DIV 0x4 +#define ASS_CLK_GATE 0x8 + +static unsigned long reg_save[][2] = { + {ASS_CLK_SRC, 0}, + {ASS_CLK_DIV, 0}, + {ASS_CLK_GATE, 0}, +}; + +/* list of all parent clock list */ +static const char *mout_audss_p[] = { "fin_pll", "fout_epll" }; +static const char *mout_i2s_p[] = { "mout_audss", "cdclk0", "sclk_audio0" }; + +#ifdef CONFIG_PM_SLEEP +static int exynos_audss_clk_suspend(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(reg_save); i++) + reg_save[i][1] = readl(reg_base + reg_save[i][0]); + + return 0; +} + +static void exynos_audss_clk_resume(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(reg_save); i++) + writel(reg_save[i][1], reg_base + reg_save[i][0]); +} + +static struct syscore_ops exynos_audss_clk_syscore_ops = { + .suspend = exynos_audss_clk_suspend, + .resume = exynos_audss_clk_resume, +}; +#endif /* CONFIG_PM_SLEEP */ + +/* register exynos_audss clocks */ +void __init exynos_audss_clk_init(struct device_node *np) +{ + reg_base = of_iomap(np, 0); + if (!reg_base) { + pr_err("%s: failed to map audss registers\n", __func__); + return; + } + + clk_table = kzalloc(sizeof(struct clk *) * EXYNOS_AUDSS_MAX_CLKS, + GFP_KERNEL); + if (!clk_table) { + pr_err("%s: could not allocate clk lookup table\n", __func__); + return; + } + + clk_data.clks = clk_table; + clk_data.clk_num = EXYNOS_AUDSS_MAX_CLKS; + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + clk_table[EXYNOS_MOUT_AUDSS] = clk_register_mux(NULL, "mout_audss", + mout_audss_p, ARRAY_SIZE(mout_audss_p), 0, + reg_base + ASS_CLK_SRC, 0, 1, 0, &lock); + + clk_table[EXYNOS_MOUT_I2S] = clk_register_mux(NULL, "mout_i2s", + mout_i2s_p, ARRAY_SIZE(mout_i2s_p), 0, + reg_base + ASS_CLK_SRC, 2, 2, 0, &lock); + + clk_table[EXYNOS_DOUT_SRP] = clk_register_divider(NULL, "dout_srp", + "mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4, + 0, &lock); + + clk_table[EXYNOS_DOUT_AUD_BUS] = clk_register_divider(NULL, + "dout_aud_bus", "dout_srp", 0, + reg_base + ASS_CLK_DIV, 4, 4, 0, &lock); + + clk_table[EXYNOS_DOUT_I2S] = clk_register_divider(NULL, "dout_i2s", + "mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0, + &lock); + + clk_table[EXYNOS_SRP_CLK] = clk_register_gate(NULL, "srp_clk", + "dout_srp", CLK_SET_RATE_PARENT, + reg_base + ASS_CLK_GATE, 0, 0, &lock); + + clk_table[EXYNOS_I2S_BUS] = clk_register_gate(NULL, "i2s_bus", + "dout_aud_bus", CLK_SET_RATE_PARENT, + reg_base + ASS_CLK_GATE, 2, 0, &lock); + + clk_table[EXYNOS_SCLK_I2S] = clk_register_gate(NULL, "sclk_i2s", + "dout_i2s", CLK_SET_RATE_PARENT, + reg_base + ASS_CLK_GATE, 3, 0, &lock); + + clk_table[EXYNOS_PCM_BUS] = clk_register_gate(NULL, "pcm_bus", + "sclk_pcm", CLK_SET_RATE_PARENT, + reg_base + ASS_CLK_GATE, 4, 0, &lock); + + clk_table[EXYNOS_SCLK_PCM] = clk_register_gate(NULL, "sclk_pcm", + "div_pcm0", CLK_SET_RATE_PARENT, + reg_base + ASS_CLK_GATE, 5, 0, &lock); + +#ifdef CONFIG_PM_SLEEP + register_syscore_ops(&exynos_audss_clk_syscore_ops); +#endif + + pr_info("Exynos: Audss: clock setup completed\n"); +} +CLK_OF_DECLARE(exynos4210_audss_clk, "samsung,exynos4210-audss-clock", + exynos_audss_clk_init); +CLK_OF_DECLARE(exynos5250_audss_clk, "samsung,exynos5250-audss-clock", + exynos_audss_clk_init); diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index 3c1f88868f29..addc738a06fb 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -151,7 +151,7 @@ enum exynos4_clks { sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2, sclk_slimbus, sclk_fimd1, sclk_mipi1, sclk_pcm1, sclk_pcm2, sclk_i2s1, sclk_i2s2, sclk_mipihsi, sclk_mfc, sclk_pcm0, sclk_g3d, sclk_pwm_isp, - sclk_spi0_isp, sclk_spi1_isp, sclk_uart_isp, + sclk_spi0_isp, sclk_spi1_isp, sclk_uart_isp, sclk_fimg2d, /* gate clocks */ fimc0 = 256, fimc1, fimc2, fimc3, csis0, csis1, jpeg, smmu_fimc0, @@ -484,6 +484,9 @@ struct samsung_mux_clock exynos4x12_mux_clks[] __initdata = { MUX(none, "mout_spi0_isp", group1_p4x12, E4X12_SRC_ISP, 4, 4), MUX(none, "mout_spi1_isp", group1_p4x12, E4X12_SRC_ISP, 8, 4), MUX(none, "mout_uart_isp", group1_p4x12, E4X12_SRC_ISP, 12, 4), + MUX(none, "mout_g2d0", sclk_ampll_p4210, SRC_DMC, 20, 1), + MUX(none, "mout_g2d1", sclk_evpll_p, SRC_DMC, 24, 1), + MUX(none, "mout_g2d", mout_g2d_p, SRC_DMC, 28, 1), }; /* list of divider clocks supported in all exynos4 soc's */ @@ -552,7 +555,7 @@ struct samsung_div_clock exynos4_div_clks[] __initdata = { /* list of divider clocks supported in exynos4210 soc */ struct samsung_div_clock exynos4210_div_clks[] __initdata = { DIV(aclk200, "aclk200", "mout_aclk200", DIV_TOP, 0, 3), - DIV(none, "div_g2d", "mout_g2d", DIV_IMAGE, 0, 4), + DIV(sclk_fimg2d, "sclk_fimg2d", "mout_g2d", DIV_IMAGE, 0, 4), DIV(none, "div_fimd1", "mout_fimd1", E4210_DIV_LCD1, 0, 4), DIV(none, "div_mipi1", "mout_mipi1", E4210_DIV_LCD1, 16, 4), DIV(none, "div_sata", "mout_sata", DIV_FSYS0, 20, 4), @@ -582,6 +585,7 @@ struct samsung_div_clock exynos4x12_div_clks[] __initdata = { DIV(none, "div_mpwm", "div_isp1", E4X12_DIV_ISP1, 0, 3), DIV(div_mcuisp0, "div_mcuisp0", "aclk400_mcuisp", E4X12_DIV_ISP1, 4, 3), DIV(div_mcuisp1, "div_mcuisp1", "div_mcuisp0", E4X12_DIV_ISP1, 8, 3), + DIV(sclk_fimg2d, "sclk_fimg2d", "mout_g2d", DIV_DMC1, 0, 4), }; /* list of gate clocks supported in all exynos4 soc's */ @@ -909,6 +913,7 @@ struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { CLK_IGNORE_UNUSED, 0), GATE(spi1_isp, "spi1_isp", "aclk200", E4X12_GATE_ISP1, 13, CLK_IGNORE_UNUSED, 0), + GATE(g2d, "g2d", "aclk200", GATE_IP_DMC, 23, 0, 0), }; /* diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 5c97e75924a8..7c6885058cef 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -87,6 +87,7 @@ enum exynos5250_clks { sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_sata, sclk_usb3, sclk_jpeg, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_pwm, sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2, + div_i2s1, div_i2s2, /* gate clocks */ gscl0 = 256, gscl1, gscl2, gscl3, gscl_wa, gscl_wb, smmu_gscl0, @@ -291,8 +292,8 @@ struct samsung_div_clock exynos5250_div_clks[] __initdata = { DIV(none, "div_pcm1", "sclk_audio1", DIV_PERIC4, 4, 8), DIV(none, "div_audio2", "mout_audio2", DIV_PERIC4, 16, 4), DIV(none, "div_pcm2", "sclk_audio2", DIV_PERIC4, 20, 8), - DIV(none, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6), - DIV(none, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6), + DIV(div_i2s1, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6), + DIV(div_i2s2, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6), DIV(sclk_pixel, "div_hdmi_pixel", "sclk_vpll", DIV_DISP1_0, 28, 4), DIV_A(none, "armclk", "div_arm", DIV_CPU0, 28, 3, "armclk"), DIV_F(none, "div_mipi1_pre", "div_mipi1", diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c new file mode 100644 index 000000000000..68a96cbd4936 --- /dev/null +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -0,0 +1,762 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * Authors: Thomas Abraham <thomas.ab@samsung.com> + * Chander Kashyap <k.chander@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for Exynos5420 SoC. +*/ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "clk.h" +#include "clk-pll.h" + +#define SRC_CPU 0x200 +#define DIV_CPU0 0x500 +#define DIV_CPU1 0x504 +#define GATE_BUS_CPU 0x700 +#define GATE_SCLK_CPU 0x800 +#define SRC_TOP0 0x10200 +#define SRC_TOP1 0x10204 +#define SRC_TOP2 0x10208 +#define SRC_TOP3 0x1020c +#define SRC_TOP4 0x10210 +#define SRC_TOP5 0x10214 +#define SRC_TOP6 0x10218 +#define SRC_TOP7 0x1021c +#define SRC_DISP10 0x1022c +#define SRC_MAU 0x10240 +#define SRC_FSYS 0x10244 +#define SRC_PERIC0 0x10250 +#define SRC_PERIC1 0x10254 +#define SRC_TOP10 0x10280 +#define SRC_TOP11 0x10284 +#define SRC_TOP12 0x10288 +#define SRC_MASK_DISP10 0x1032c +#define SRC_MASK_FSYS 0x10340 +#define SRC_MASK_PERIC0 0x10350 +#define SRC_MASK_PERIC1 0x10354 +#define DIV_TOP0 0x10500 +#define DIV_TOP1 0x10504 +#define DIV_TOP2 0x10508 +#define DIV_DISP10 0x1052c +#define DIV_MAU 0x10544 +#define DIV_FSYS0 0x10548 +#define DIV_FSYS1 0x1054c +#define DIV_FSYS2 0x10550 +#define DIV_PERIC0 0x10558 +#define DIV_PERIC1 0x1055c +#define DIV_PERIC2 0x10560 +#define DIV_PERIC3 0x10564 +#define DIV_PERIC4 0x10568 +#define GATE_BUS_TOP 0x10700 +#define GATE_BUS_FSYS0 0x10740 +#define GATE_BUS_PERIC 0x10750 +#define GATE_BUS_PERIC1 0x10754 +#define GATE_BUS_PERIS0 0x10760 +#define GATE_BUS_PERIS1 0x10764 +#define GATE_IP_GSCL0 0x10910 +#define GATE_IP_GSCL1 0x10920 +#define GATE_IP_MFC 0x1092c +#define GATE_IP_DISP1 0x10928 +#define GATE_IP_G3D 0x10930 +#define GATE_IP_GEN 0x10934 +#define GATE_IP_MSCL 0x10970 +#define GATE_TOP_SCLK_GSCL 0x10820 +#define GATE_TOP_SCLK_DISP1 0x10828 +#define GATE_TOP_SCLK_MAU 0x1083c +#define GATE_TOP_SCLK_FSYS 0x10840 +#define GATE_TOP_SCLK_PERIC 0x10850 +#define SRC_CDREX 0x20200 +#define SRC_KFC 0x28200 +#define DIV_KFC0 0x28500 + +enum exynos5420_clks { + none, + + /* core clocks */ + fin_pll, + + /* gate for special clocks (sclk) */ + sclk_uart0 = 128, sclk_uart1, sclk_uart2, sclk_uart3, sclk_mmc0, + sclk_mmc1, sclk_mmc2, sclk_spi0, sclk_spi1, sclk_spi2, sclk_i2s1, + sclk_i2s2, sclk_pcm1, sclk_pcm2, sclk_spdif, sclk_hdmi, sclk_pixel, + sclk_dp1, sclk_mipi1, sclk_fimd1, sclk_maudio0, sclk_maupcm0, + sclk_usbd300, sclk_usbd301, sclk_usbphy300, sclk_usbphy301, sclk_unipro, + sclk_pwm, sclk_gscl_wa, sclk_gscl_wb, + + /* gate clocks */ + aclk66_peric = 256, uart0, uart1, uart2, uart3, i2c0, i2c1, i2c2, i2c3, + i2c4, i2c5, i2c6, i2c7, i2c_hdmi, tsadc, spi0, spi1, spi2, keyif, i2s1, + i2s2, pcm1, pcm2, pwm, spdif, i2c8, i2c9, i2c10, aclk66_psgen = 300, + chipid, sysreg, tzpc0, tzpc1, tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7, + tzpc8, tzpc9, hdmi_cec, seckey, mct, wdt, rtc, tmu, tmu_gpu, + pclk66_gpio = 330, aclk200_fsys2 = 350, mmc0, mmc1, mmc2, sromc, ufs, + aclk200_fsys = 360, tsi, pdma0, pdma1, rtic, usbh20, usbd300, usbd301, + aclk400_mscl = 380, mscl0, mscl1, mscl2, smmu_mscl0, smmu_mscl1, + smmu_mscl2, aclk333 = 400, mfc, smmu_mfcl, smmu_mfcr, + aclk200_disp1 = 410, dsim1, dp1, hdmi, aclk300_disp1 = 420, fimd1, + smmu_fimd1, aclk166 = 430, mixer, aclk266 = 440, rotator, mdma1, + smmu_rotator, smmu_mdma1, aclk300_jpeg = 450, jpeg, jpeg2, smmu_jpeg, + aclk300_gscl = 460, smmu_gscl0, smmu_gscl1, gscl_wa, gscl_wb, gscl0, + gscl1, clk_3aa, aclk266_g2d = 470, sss, slim_sss, mdma0, + aclk333_g2d = 480, g2d, aclk333_432_gscl = 490, smmu_3aa, smmu_fimcl0, + smmu_fimcl1, smmu_fimcl3, fimc_lite3, aclk_g3d = 500, g3d, + + nr_clks, +}; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static __initdata unsigned long exynos5420_clk_regs[] = { + SRC_CPU, + DIV_CPU0, + DIV_CPU1, + GATE_BUS_CPU, + GATE_SCLK_CPU, + SRC_TOP0, + SRC_TOP1, + SRC_TOP2, + SRC_TOP3, + SRC_TOP4, + SRC_TOP5, + SRC_TOP6, + SRC_TOP7, + SRC_DISP10, + SRC_MAU, + SRC_FSYS, + SRC_PERIC0, + SRC_PERIC1, + SRC_TOP10, + SRC_TOP11, + SRC_TOP12, + SRC_MASK_DISP10, + SRC_MASK_FSYS, + SRC_MASK_PERIC0, + SRC_MASK_PERIC1, + DIV_TOP0, + DIV_TOP1, + DIV_TOP2, + DIV_DISP10, + DIV_MAU, + DIV_FSYS0, + DIV_FSYS1, + DIV_FSYS2, + DIV_PERIC0, + DIV_PERIC1, + DIV_PERIC2, + DIV_PERIC3, + DIV_PERIC4, + GATE_BUS_TOP, + GATE_BUS_FSYS0, + GATE_BUS_PERIC, + GATE_BUS_PERIC1, + GATE_BUS_PERIS0, + GATE_BUS_PERIS1, + GATE_IP_GSCL0, + GATE_IP_GSCL1, + GATE_IP_MFC, + GATE_IP_DISP1, + GATE_IP_G3D, + GATE_IP_GEN, + GATE_IP_MSCL, + GATE_TOP_SCLK_GSCL, + GATE_TOP_SCLK_DISP1, + GATE_TOP_SCLK_MAU, + GATE_TOP_SCLK_FSYS, + GATE_TOP_SCLK_PERIC, + SRC_CDREX, + SRC_KFC, + DIV_KFC0, +}; + +/* list of all parent clocks */ +PNAME(mspll_cpu_p) = { "sclk_cpll", "sclk_dpll", + "sclk_mpll", "sclk_spll" }; +PNAME(cpu_p) = { "mout_apll" , "mout_mspll_cpu" }; +PNAME(kfc_p) = { "mout_kpll" , "mout_mspll_kfc" }; +PNAME(apll_p) = { "fin_pll", "fout_apll", }; +PNAME(bpll_p) = { "fin_pll", "fout_bpll", }; +PNAME(cpll_p) = { "fin_pll", "fout_cpll", }; +PNAME(dpll_p) = { "fin_pll", "fout_dpll", }; +PNAME(epll_p) = { "fin_pll", "fout_epll", }; +PNAME(ipll_p) = { "fin_pll", "fout_ipll", }; +PNAME(kpll_p) = { "fin_pll", "fout_kpll", }; +PNAME(mpll_p) = { "fin_pll", "fout_mpll", }; +PNAME(rpll_p) = { "fin_pll", "fout_rpll", }; +PNAME(spll_p) = { "fin_pll", "fout_spll", }; +PNAME(vpll_p) = { "fin_pll", "fout_vpll", }; + +PNAME(group1_p) = { "sclk_cpll", "sclk_dpll", "sclk_mpll" }; +PNAME(group2_p) = { "fin_pll", "sclk_cpll", "sclk_dpll", "sclk_mpll", + "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" }; +PNAME(group3_p) = { "sclk_rpll", "sclk_spll" }; +PNAME(group4_p) = { "sclk_ipll", "sclk_dpll", "sclk_mpll" }; +PNAME(group5_p) = { "sclk_vpll", "sclk_dpll" }; + +PNAME(sw_aclk66_p) = { "dout_aclk66", "sclk_spll" }; +PNAME(aclk66_peric_p) = { "fin_pll", "mout_sw_aclk66" }; + +PNAME(sw_aclk200_fsys_p) = { "dout_aclk200_fsys", "sclk_spll"}; +PNAME(user_aclk200_fsys_p) = { "fin_pll", "mout_sw_aclk200_fsys" }; + +PNAME(sw_aclk200_fsys2_p) = { "dout_aclk200_fsys2", "sclk_spll"}; +PNAME(user_aclk200_fsys2_p) = { "fin_pll", "mout_sw_aclk200_fsys2" }; + +PNAME(sw_aclk200_p) = { "dout_aclk200", "sclk_spll"}; +PNAME(aclk200_disp1_p) = { "fin_pll", "mout_sw_aclk200" }; + +PNAME(sw_aclk400_mscl_p) = { "dout_aclk400_mscl", "sclk_spll"}; +PNAME(user_aclk400_mscl_p) = { "fin_pll", "mout_sw_aclk400_mscl" }; + +PNAME(sw_aclk333_p) = { "dout_aclk333", "sclk_spll"}; +PNAME(user_aclk333_p) = { "fin_pll", "mout_sw_aclk333" }; + +PNAME(sw_aclk166_p) = { "dout_aclk166", "sclk_spll"}; +PNAME(user_aclk166_p) = { "fin_pll", "mout_sw_aclk166" }; + +PNAME(sw_aclk266_p) = { "dout_aclk266", "sclk_spll"}; +PNAME(user_aclk266_p) = { "fin_pll", "mout_sw_aclk266" }; + +PNAME(sw_aclk333_432_gscl_p) = { "dout_aclk333_432_gscl", "sclk_spll"}; +PNAME(user_aclk333_432_gscl_p) = { "fin_pll", "mout_sw_aclk333_432_gscl" }; + +PNAME(sw_aclk300_gscl_p) = { "dout_aclk300_gscl", "sclk_spll"}; +PNAME(user_aclk300_gscl_p) = { "fin_pll", "mout_sw_aclk300_gscl" }; + +PNAME(sw_aclk300_disp1_p) = { "dout_aclk300_disp1", "sclk_spll"}; +PNAME(user_aclk300_disp1_p) = { "fin_pll", "mout_sw_aclk300_disp1" }; + +PNAME(sw_aclk300_jpeg_p) = { "dout_aclk300_jpeg", "sclk_spll"}; +PNAME(user_aclk300_jpeg_p) = { "fin_pll", "mout_sw_aclk300_jpeg" }; + +PNAME(sw_aclk_g3d_p) = { "dout_aclk_g3d", "sclk_spll"}; +PNAME(user_aclk_g3d_p) = { "fin_pll", "mout_sw_aclk_g3d" }; + +PNAME(sw_aclk266_g2d_p) = { "dout_aclk266_g2d", "sclk_spll"}; +PNAME(user_aclk266_g2d_p) = { "fin_pll", "mout_sw_aclk266_g2d" }; + +PNAME(sw_aclk333_g2d_p) = { "dout_aclk333_g2d", "sclk_spll"}; +PNAME(user_aclk333_g2d_p) = { "fin_pll", "mout_sw_aclk333_g2d" }; + +PNAME(audio0_p) = { "fin_pll", "cdclk0", "sclk_dpll", "sclk_mpll", + "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" }; +PNAME(audio1_p) = { "fin_pll", "cdclk1", "sclk_dpll", "sclk_mpll", + "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" }; +PNAME(audio2_p) = { "fin_pll", "cdclk2", "sclk_dpll", "sclk_mpll", + "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" }; +PNAME(spdif_p) = { "fin_pll", "dout_audio0", "dout_audio1", "dout_audio2", + "spdif_extclk", "sclk_ipll", "sclk_epll", "sclk_rpll" }; +PNAME(hdmi_p) = { "sclk_hdmiphy", "dout_hdmi_pixel" }; +PNAME(maudio0_p) = { "fin_pll", "maudio_clk", "sclk_dpll", "sclk_mpll", + "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" }; + +/* fixed rate clocks generated outside the soc */ +struct samsung_fixed_rate_clock exynos5420_fixed_rate_ext_clks[] __initdata = { + FRATE(fin_pll, "fin_pll", NULL, CLK_IS_ROOT, 0), +}; + +/* fixed rate clocks generated inside the soc */ +struct samsung_fixed_rate_clock exynos5420_fixed_rate_clks[] __initdata = { + FRATE(none, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 24000000), + FRATE(none, "sclk_pwi", NULL, CLK_IS_ROOT, 24000000), + FRATE(none, "sclk_usbh20", NULL, CLK_IS_ROOT, 48000000), + FRATE(none, "mphy_refclk_ixtal24", NULL, CLK_IS_ROOT, 48000000), + FRATE(none, "sclk_usbh20_scan_clk", NULL, CLK_IS_ROOT, 480000000), +}; + +struct samsung_fixed_factor_clock exynos5420_fixed_factor_clks[] __initdata = { + FFACTOR(none, "sclk_hsic_12m", "fin_pll", 1, 2, 0), +}; + +struct samsung_mux_clock exynos5420_mux_clks[] __initdata = { + MUX(none, "mout_mspll_kfc", mspll_cpu_p, SRC_TOP7, 8, 2), + MUX(none, "mout_mspll_cpu", mspll_cpu_p, SRC_TOP7, 12, 2), + MUX(none, "mout_apll", apll_p, SRC_CPU, 0, 1), + MUX(none, "mout_cpu", cpu_p, SRC_CPU, 16, 1), + MUX(none, "mout_kpll", kpll_p, SRC_KFC, 0, 1), + MUX(none, "mout_cpu_kfc", kfc_p, SRC_KFC, 16, 1), + + MUX(none, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1), + + MUX_A(none, "mout_aclk400_mscl", group1_p, + SRC_TOP0, 4, 2, "aclk400_mscl"), + MUX(none, "mout_aclk200", group1_p, SRC_TOP0, 8, 2), + MUX(none, "mout_aclk200_fsys2", group1_p, SRC_TOP0, 12, 2), + MUX(none, "mout_aclk200_fsys", group1_p, SRC_TOP0, 28, 2), + + MUX(none, "mout_aclk333_432_gscl", group4_p, SRC_TOP1, 0, 2), + MUX(none, "mout_aclk66", group1_p, SRC_TOP1, 8, 2), + MUX(none, "mout_aclk266", group1_p, SRC_TOP1, 20, 2), + MUX(none, "mout_aclk166", group1_p, SRC_TOP1, 24, 2), + MUX(none, "mout_aclk333", group1_p, SRC_TOP1, 28, 2), + + MUX(none, "mout_aclk333_g2d", group1_p, SRC_TOP2, 8, 2), + MUX(none, "mout_aclk266_g2d", group1_p, SRC_TOP2, 12, 2), + MUX(none, "mout_aclk_g3d", group5_p, SRC_TOP2, 16, 1), + MUX(none, "mout_aclk300_jpeg", group1_p, SRC_TOP2, 20, 2), + MUX(none, "mout_aclk300_disp1", group1_p, SRC_TOP2, 24, 2), + MUX(none, "mout_aclk300_gscl", group1_p, SRC_TOP2, 28, 2), + + MUX(none, "mout_user_aclk400_mscl", user_aclk400_mscl_p, + SRC_TOP3, 4, 1), + MUX_A(none, "mout_aclk200_disp1", aclk200_disp1_p, + SRC_TOP3, 8, 1, "aclk200_disp1"), + MUX(none, "mout_user_aclk200_fsys2", user_aclk200_fsys2_p, + SRC_TOP3, 12, 1), + MUX(none, "mout_user_aclk200_fsys", user_aclk200_fsys_p, + SRC_TOP3, 28, 1), + + MUX(none, "mout_user_aclk333_432_gscl", user_aclk333_432_gscl_p, + SRC_TOP4, 0, 1), + MUX(none, "mout_aclk66_peric", aclk66_peric_p, SRC_TOP4, 8, 1), + MUX(none, "mout_user_aclk266", user_aclk266_p, SRC_TOP4, 20, 1), + MUX(none, "mout_user_aclk166", user_aclk166_p, SRC_TOP4, 24, 1), + MUX(none, "mout_user_aclk333", user_aclk333_p, SRC_TOP4, 28, 1), + + MUX(none, "mout_aclk66_psgen", aclk66_peric_p, SRC_TOP5, 4, 1), + MUX(none, "mout_user_aclk333_g2d", user_aclk333_g2d_p, SRC_TOP5, 8, 1), + MUX(none, "mout_user_aclk266_g2d", user_aclk266_g2d_p, SRC_TOP5, 12, 1), + MUX_A(none, "mout_user_aclk_g3d", user_aclk_g3d_p, + SRC_TOP5, 16, 1, "aclkg3d"), + MUX(none, "mout_user_aclk300_jpeg", user_aclk300_jpeg_p, + SRC_TOP5, 20, 1), + MUX(none, "mout_user_aclk300_disp1", user_aclk300_disp1_p, + SRC_TOP5, 24, 1), + MUX(none, "mout_user_aclk300_gscl", user_aclk300_gscl_p, + SRC_TOP5, 28, 1), + + MUX(none, "sclk_mpll", mpll_p, SRC_TOP6, 0, 1), + MUX(none, "sclk_vpll", vpll_p, SRC_TOP6, 4, 1), + MUX(none, "sclk_spll", spll_p, SRC_TOP6, 8, 1), + MUX(none, "sclk_ipll", ipll_p, SRC_TOP6, 12, 1), + MUX(none, "sclk_rpll", rpll_p, SRC_TOP6, 16, 1), + MUX(none, "sclk_epll", epll_p, SRC_TOP6, 20, 1), + MUX(none, "sclk_dpll", dpll_p, SRC_TOP6, 24, 1), + MUX(none, "sclk_cpll", cpll_p, SRC_TOP6, 28, 1), + + MUX(none, "mout_sw_aclk400_mscl", sw_aclk400_mscl_p, SRC_TOP10, 4, 1), + MUX(none, "mout_sw_aclk200", sw_aclk200_p, SRC_TOP10, 8, 1), + MUX(none, "mout_sw_aclk200_fsys2", sw_aclk200_fsys2_p, + SRC_TOP10, 12, 1), + MUX(none, "mout_sw_aclk200_fsys", sw_aclk200_fsys_p, SRC_TOP10, 28, 1), + + MUX(none, "mout_sw_aclk333_432_gscl", sw_aclk333_432_gscl_p, + SRC_TOP11, 0, 1), + MUX(none, "mout_sw_aclk66", sw_aclk66_p, SRC_TOP11, 8, 1), + MUX(none, "mout_sw_aclk266", sw_aclk266_p, SRC_TOP11, 20, 1), + MUX(none, "mout_sw_aclk166", sw_aclk166_p, SRC_TOP11, 24, 1), + MUX(none, "mout_sw_aclk333", sw_aclk333_p, SRC_TOP11, 28, 1), + + MUX(none, "mout_sw_aclk333_g2d", sw_aclk333_g2d_p, SRC_TOP12, 8, 1), + MUX(none, "mout_sw_aclk266_g2d", sw_aclk266_g2d_p, SRC_TOP12, 12, 1), + MUX(none, "mout_sw_aclk_g3d", sw_aclk_g3d_p, SRC_TOP12, 16, 1), + MUX(none, "mout_sw_aclk300_jpeg", sw_aclk300_jpeg_p, SRC_TOP12, 20, 1), + MUX(none, "mout_sw_aclk300_disp1", sw_aclk300_disp1_p, + SRC_TOP12, 24, 1), + MUX(none, "mout_sw_aclk300_gscl", sw_aclk300_gscl_p, SRC_TOP12, 28, 1), + + /* DISP1 Block */ + MUX(none, "mout_fimd1", group3_p, SRC_DISP10, 4, 1), + MUX(none, "mout_mipi1", group2_p, SRC_DISP10, 16, 3), + MUX(none, "mout_dp1", group2_p, SRC_DISP10, 20, 3), + MUX(none, "mout_pixel", group2_p, SRC_DISP10, 24, 3), + MUX(none, "mout_hdmi", hdmi_p, SRC_DISP10, 28, 1), + + /* MAU Block */ + MUX(none, "mout_maudio0", maudio0_p, SRC_MAU, 28, 3), + + /* FSYS Block */ + MUX(none, "mout_usbd301", group2_p, SRC_FSYS, 4, 3), + MUX(none, "mout_mmc0", group2_p, SRC_FSYS, 8, 3), + MUX(none, "mout_mmc1", group2_p, SRC_FSYS, 12, 3), + MUX(none, "mout_mmc2", group2_p, SRC_FSYS, 16, 3), + MUX(none, "mout_usbd300", group2_p, SRC_FSYS, 20, 3), + MUX(none, "mout_unipro", group2_p, SRC_FSYS, 24, 3), + + /* PERIC Block */ + MUX(none, "mout_uart0", group2_p, SRC_PERIC0, 4, 3), + MUX(none, "mout_uart1", group2_p, SRC_PERIC0, 8, 3), + MUX(none, "mout_uart2", group2_p, SRC_PERIC0, 12, 3), + MUX(none, "mout_uart3", group2_p, SRC_PERIC0, 16, 3), + MUX(none, "mout_pwm", group2_p, SRC_PERIC0, 24, 3), + MUX(none, "mout_spdif", spdif_p, SRC_PERIC0, 28, 3), + MUX(none, "mout_audio0", audio0_p, SRC_PERIC1, 8, 3), + MUX(none, "mout_audio1", audio1_p, SRC_PERIC1, 12, 3), + MUX(none, "mout_audio2", audio2_p, SRC_PERIC1, 16, 3), + MUX(none, "mout_spi0", group2_p, SRC_PERIC1, 20, 3), + MUX(none, "mout_spi1", group2_p, SRC_PERIC1, 24, 3), + MUX(none, "mout_spi2", group2_p, SRC_PERIC1, 28, 3), +}; + +struct samsung_div_clock exynos5420_div_clks[] __initdata = { + DIV(none, "div_arm", "mout_cpu", DIV_CPU0, 0, 3), + DIV(none, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3), + DIV(none, "armclk2", "div_arm", DIV_CPU0, 28, 3), + DIV(none, "div_kfc", "mout_cpu_kfc", DIV_KFC0, 0, 3), + DIV(none, "sclk_kpll", "mout_kpll", DIV_KFC0, 24, 3), + + DIV(none, "dout_aclk400_mscl", "mout_aclk400_mscl", DIV_TOP0, 4, 3), + DIV(none, "dout_aclk200", "mout_aclk200", DIV_TOP0, 8, 3), + DIV(none, "dout_aclk200_fsys2", "mout_aclk200_fsys2", DIV_TOP0, 12, 3), + DIV(none, "dout_pclk200_fsys", "mout_pclk200_fsys", DIV_TOP0, 24, 3), + DIV(none, "dout_aclk200_fsys", "mout_aclk200_fsys", DIV_TOP0, 28, 3), + + DIV(none, "dout_aclk333_432_gscl", "mout_aclk333_432_gscl", + DIV_TOP1, 0, 3), + DIV(none, "dout_aclk66", "mout_aclk66", DIV_TOP1, 8, 6), + DIV(none, "dout_aclk266", "mout_aclk266", DIV_TOP1, 20, 3), + DIV(none, "dout_aclk166", "mout_aclk166", DIV_TOP1, 24, 3), + DIV(none, "dout_aclk333", "mout_aclk333", DIV_TOP1, 28, 3), + + DIV(none, "dout_aclk333_g2d", "mout_aclk333_g2d", DIV_TOP2, 8, 3), + DIV(none, "dout_aclk266_g2d", "mout_aclk266_g2d", DIV_TOP2, 12, 3), + DIV(none, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2, 16, 3), + DIV(none, "dout_aclk300_jpeg", "mout_aclk300_jpeg", DIV_TOP2, 20, 3), + DIV_A(none, "dout_aclk300_disp1", "mout_aclk300_disp1", + DIV_TOP2, 24, 3, "aclk300_disp1"), + DIV(none, "dout_aclk300_gscl", "mout_aclk300_gscl", DIV_TOP2, 28, 3), + + /* DISP1 Block */ + DIV(none, "dout_fimd1", "mout_fimd1", DIV_DISP10, 0, 4), + DIV(none, "dout_mipi1", "mout_mipi1", DIV_DISP10, 16, 8), + DIV(none, "dout_dp1", "mout_dp1", DIV_DISP10, 24, 4), + DIV(none, "dout_hdmi_pixel", "mout_pixel", DIV_DISP10, 28, 4), + + /* Audio Block */ + DIV(none, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4), + DIV(none, "dout_maupcm0", "dout_maudio0", DIV_MAU, 24, 8), + + /* USB3.0 */ + DIV(none, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), + DIV(none, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), + DIV(none, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), + DIV(none, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), + + /* MMC */ + DIV(none, "dout_mmc0", "mout_mmc0", DIV_FSYS1, 0, 10), + DIV(none, "dout_mmc1", "mout_mmc1", DIV_FSYS1, 10, 10), + DIV(none, "dout_mmc2", "mout_mmc2", DIV_FSYS1, 20, 10), + + DIV(none, "dout_unipro", "mout_unipro", DIV_FSYS2, 24, 8), + + /* UART and PWM */ + DIV(none, "dout_uart0", "mout_uart0", DIV_PERIC0, 8, 4), + DIV(none, "dout_uart1", "mout_uart1", DIV_PERIC0, 12, 4), + DIV(none, "dout_uart2", "mout_uart2", DIV_PERIC0, 16, 4), + DIV(none, "dout_uart3", "mout_uart3", DIV_PERIC0, 20, 4), + DIV(none, "dout_pwm", "mout_pwm", DIV_PERIC0, 28, 4), + + /* SPI */ + DIV(none, "dout_spi0", "mout_spi0", DIV_PERIC1, 20, 4), + DIV(none, "dout_spi1", "mout_spi1", DIV_PERIC1, 24, 4), + DIV(none, "dout_spi2", "mout_spi2", DIV_PERIC1, 28, 4), + + /* PCM */ + DIV(none, "dout_pcm1", "dout_audio1", DIV_PERIC2, 16, 8), + DIV(none, "dout_pcm2", "dout_audio2", DIV_PERIC2, 24, 8), + + /* Audio - I2S */ + DIV(none, "dout_i2s1", "dout_audio1", DIV_PERIC3, 6, 6), + DIV(none, "dout_i2s2", "dout_audio2", DIV_PERIC3, 12, 6), + DIV(none, "dout_audio0", "mout_audio0", DIV_PERIC3, 20, 4), + DIV(none, "dout_audio1", "mout_audio1", DIV_PERIC3, 24, 4), + DIV(none, "dout_audio2", "mout_audio2", DIV_PERIC3, 28, 4), + + /* SPI Pre-Ratio */ + DIV(none, "dout_pre_spi0", "dout_spi0", DIV_PERIC4, 8, 8), + DIV(none, "dout_pre_spi1", "dout_spi1", DIV_PERIC4, 16, 8), + DIV(none, "dout_pre_spi2", "dout_spi2", DIV_PERIC4, 24, 8), +}; + +struct samsung_gate_clock exynos5420_gate_clks[] __initdata = { + /* TODO: Re-verify the CG bits for all the gate clocks */ + GATE_A(mct, "pclk_st", "aclk66_psgen", GATE_BUS_PERIS1, 2, 0, 0, "mct"), + + GATE(0, "aclk200_fsys", "mout_user_aclk200_fsys", + GATE_BUS_FSYS0, 9, CLK_IGNORE_UNUSED, 0), + GATE(0, "aclk200_fsys2", "mout_user_aclk200_fsys2", + GATE_BUS_FSYS0, 10, CLK_IGNORE_UNUSED, 0), + + GATE(0, "aclk333_g2d", "mout_user_aclk333_g2d", + GATE_BUS_TOP, 0, CLK_IGNORE_UNUSED, 0), + GATE(0, "aclk266_g2d", "mout_user_aclk266_g2d", + GATE_BUS_TOP, 1, CLK_IGNORE_UNUSED, 0), + GATE(0, "aclk300_jpeg", "mout_user_aclk300_jpeg", + GATE_BUS_TOP, 4, CLK_IGNORE_UNUSED, 0), + GATE(0, "aclk300_gscl", "mout_user_aclk300_gscl", + GATE_BUS_TOP, 6, CLK_IGNORE_UNUSED, 0), + GATE(0, "aclk333_432_gscl", "mout_user_aclk333_432_gscl", + GATE_BUS_TOP, 7, CLK_IGNORE_UNUSED, 0), + GATE(0, "pclk66_gpio", "mout_sw_aclk66", + GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0), + GATE(0, "aclk66_psgen", "mout_aclk66_psgen", + GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0), + GATE(0, "aclk66_peric", "mout_aclk66_peric", + GATE_BUS_TOP, 11, 0, 0), + GATE(0, "aclk166", "mout_user_aclk166", + GATE_BUS_TOP, 14, CLK_IGNORE_UNUSED, 0), + GATE(0, "aclk333", "mout_aclk333", + GATE_BUS_TOP, 15, CLK_IGNORE_UNUSED, 0), + + /* sclk */ + GATE(sclk_uart0, "sclk_uart0", "dout_uart0", + GATE_TOP_SCLK_PERIC, 0, CLK_SET_RATE_PARENT, 0), + GATE(sclk_uart1, "sclk_uart1", "dout_uart1", + GATE_TOP_SCLK_PERIC, 1, CLK_SET_RATE_PARENT, 0), + GATE(sclk_uart2, "sclk_uart2", "dout_uart2", + GATE_TOP_SCLK_PERIC, 2, CLK_SET_RATE_PARENT, 0), + GATE(sclk_uart3, "sclk_uart3", "dout_uart3", + GATE_TOP_SCLK_PERIC, 3, CLK_SET_RATE_PARENT, 0), + GATE(sclk_spi0, "sclk_spi0", "dout_pre_spi0", + GATE_TOP_SCLK_PERIC, 6, CLK_SET_RATE_PARENT, 0), + GATE(sclk_spi1, "sclk_spi1", "dout_pre_spi1", + GATE_TOP_SCLK_PERIC, 7, CLK_SET_RATE_PARENT, 0), + GATE(sclk_spi2, "sclk_spi2", "dout_pre_spi2", + GATE_TOP_SCLK_PERIC, 8, CLK_SET_RATE_PARENT, 0), + GATE(sclk_spdif, "sclk_spdif", "mout_spdif", + GATE_TOP_SCLK_PERIC, 9, CLK_SET_RATE_PARENT, 0), + GATE(sclk_pwm, "sclk_pwm", "dout_pwm", + GATE_TOP_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0), + GATE(sclk_pcm1, "sclk_pcm1", "dout_pcm1", + GATE_TOP_SCLK_PERIC, 15, CLK_SET_RATE_PARENT, 0), + GATE(sclk_pcm2, "sclk_pcm2", "dout_pcm2", + GATE_TOP_SCLK_PERIC, 16, CLK_SET_RATE_PARENT, 0), + GATE(sclk_i2s1, "sclk_i2s1", "dout_i2s1", + GATE_TOP_SCLK_PERIC, 17, CLK_SET_RATE_PARENT, 0), + GATE(sclk_i2s2, "sclk_i2s2", "dout_i2s2", + GATE_TOP_SCLK_PERIC, 18, CLK_SET_RATE_PARENT, 0), + + GATE(sclk_mmc0, "sclk_mmc0", "dout_mmc0", + GATE_TOP_SCLK_FSYS, 0, CLK_SET_RATE_PARENT, 0), + GATE(sclk_mmc1, "sclk_mmc1", "dout_mmc1", + GATE_TOP_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0), + GATE(sclk_mmc2, "sclk_mmc2", "dout_mmc2", + GATE_TOP_SCLK_FSYS, 2, CLK_SET_RATE_PARENT, 0), + GATE(sclk_usbphy301, "sclk_usbphy301", "dout_usbphy301", + GATE_TOP_SCLK_FSYS, 7, CLK_SET_RATE_PARENT, 0), + GATE(sclk_usbphy300, "sclk_usbphy300", "dout_usbphy300", + GATE_TOP_SCLK_FSYS, 8, CLK_SET_RATE_PARENT, 0), + GATE(sclk_usbd300, "sclk_usbd300", "dout_usbd300", + GATE_TOP_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0), + GATE(sclk_usbd301, "sclk_usbd301", "dout_usbd301", + GATE_TOP_SCLK_FSYS, 10, CLK_SET_RATE_PARENT, 0), + + GATE(sclk_usbd301, "sclk_unipro", "dout_unipro", + SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), + + GATE(sclk_gscl_wa, "sclk_gscl_wa", "aclK333_432_gscl", + GATE_TOP_SCLK_GSCL, 6, CLK_SET_RATE_PARENT, 0), + GATE(sclk_gscl_wb, "sclk_gscl_wb", "aclk333_432_gscl", + GATE_TOP_SCLK_GSCL, 7, CLK_SET_RATE_PARENT, 0), + + /* Display */ + GATE(sclk_fimd1, "sclk_fimd1", "dout_fimd1", + GATE_TOP_SCLK_DISP1, 0, CLK_SET_RATE_PARENT, 0), + GATE(sclk_mipi1, "sclk_mipi1", "dout_mipi1", + GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0), + GATE(sclk_hdmi, "sclk_hdmi", "mout_hdmi", + GATE_TOP_SCLK_DISP1, 9, CLK_SET_RATE_PARENT, 0), + GATE(sclk_pixel, "sclk_pixel", "dout_hdmi_pixel", + GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0), + GATE(sclk_dp1, "sclk_dp1", "dout_dp1", + GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0), + + /* Maudio Block */ + GATE(sclk_maudio0, "sclk_maudio0", "dout_maudio0", + GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0), + GATE(sclk_maupcm0, "sclk_maupcm0", "dout_maupcm0", + GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0), + /* FSYS */ + GATE(tsi, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0), + GATE(pdma0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), + GATE(pdma1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), + GATE(ufs, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0), + GATE(rtic, "rtic", "aclk200_fsys", GATE_BUS_FSYS0, 5, 0, 0), + GATE(mmc0, "mmc0", "aclk200_fsys2", GATE_BUS_FSYS0, 12, 0, 0), + GATE(mmc1, "mmc1", "aclk200_fsys2", GATE_BUS_FSYS0, 13, 0, 0), + GATE(mmc2, "mmc2", "aclk200_fsys2", GATE_BUS_FSYS0, 14, 0, 0), + GATE(sromc, "sromc", "aclk200_fsys2", + GATE_BUS_FSYS0, 19, CLK_IGNORE_UNUSED, 0), + GATE(usbh20, "usbh20", "aclk200_fsys", GATE_BUS_FSYS0, 20, 0, 0), + GATE(usbd300, "usbd300", "aclk200_fsys", GATE_BUS_FSYS0, 21, 0, 0), + GATE(usbd301, "usbd301", "aclk200_fsys", GATE_BUS_FSYS0, 28, 0, 0), + + /* UART */ + GATE(uart0, "uart0", "aclk66_peric", GATE_BUS_PERIC, 4, 0, 0), + GATE(uart1, "uart1", "aclk66_peric", GATE_BUS_PERIC, 5, 0, 0), + GATE_A(uart2, "uart2", "aclk66_peric", + GATE_BUS_PERIC, 6, CLK_IGNORE_UNUSED, 0, "uart2"), + GATE(uart3, "uart3", "aclk66_peric", GATE_BUS_PERIC, 7, 0, 0), + /* I2C */ + GATE(i2c0, "i2c0", "aclk66_peric", GATE_BUS_PERIC, 9, 0, 0), + GATE(i2c1, "i2c1", "aclk66_peric", GATE_BUS_PERIC, 10, 0, 0), + GATE(i2c2, "i2c2", "aclk66_peric", GATE_BUS_PERIC, 11, 0, 0), + GATE(i2c3, "i2c3", "aclk66_peric", GATE_BUS_PERIC, 12, 0, 0), + GATE(i2c4, "i2c4", "aclk66_peric", GATE_BUS_PERIC, 13, 0, 0), + GATE(i2c5, "i2c5", "aclk66_peric", GATE_BUS_PERIC, 14, 0, 0), + GATE(i2c6, "i2c6", "aclk66_peric", GATE_BUS_PERIC, 15, 0, 0), + GATE(i2c7, "i2c7", "aclk66_peric", GATE_BUS_PERIC, 16, 0, 0), + GATE(i2c_hdmi, "i2c_hdmi", "aclk66_peric", GATE_BUS_PERIC, 17, 0, 0), + GATE(tsadc, "tsadc", "aclk66_peric", GATE_BUS_PERIC, 18, 0, 0), + /* SPI */ + GATE(spi0, "spi0", "aclk66_peric", GATE_BUS_PERIC, 19, 0, 0), + GATE(spi1, "spi1", "aclk66_peric", GATE_BUS_PERIC, 20, 0, 0), + GATE(spi2, "spi2", "aclk66_peric", GATE_BUS_PERIC, 21, 0, 0), + GATE(keyif, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0), + /* I2S */ + GATE(i2s1, "i2s1", "aclk66_peric", GATE_BUS_PERIC, 23, 0, 0), + GATE(i2s2, "i2s2", "aclk66_peric", GATE_BUS_PERIC, 24, 0, 0), + /* PCM */ + GATE(pcm1, "pcm1", "aclk66_peric", GATE_BUS_PERIC, 25, 0, 0), + GATE(pcm2, "pcm2", "aclk66_peric", GATE_BUS_PERIC, 26, 0, 0), + /* PWM */ + GATE(pwm, "pwm", "aclk66_peric", GATE_BUS_PERIC, 27, 0, 0), + /* SPDIF */ + GATE(spdif, "spdif", "aclk66_peric", GATE_BUS_PERIC, 29, 0, 0), + + GATE(i2c8, "i2c8", "aclk66_peric", GATE_BUS_PERIC1, 0, 0, 0), + GATE(i2c9, "i2c9", "aclk66_peric", GATE_BUS_PERIC1, 1, 0, 0), + GATE(i2c10, "i2c10", "aclk66_peric", GATE_BUS_PERIC1, 2, 0, 0), + + GATE(chipid, "chipid", "aclk66_psgen", + GATE_BUS_PERIS0, 12, CLK_IGNORE_UNUSED, 0), + GATE(sysreg, "sysreg", "aclk66_psgen", + GATE_BUS_PERIS0, 13, CLK_IGNORE_UNUSED, 0), + GATE(tzpc0, "tzpc0", "aclk66_psgen", GATE_BUS_PERIS0, 18, 0, 0), + GATE(tzpc1, "tzpc1", "aclk66_psgen", GATE_BUS_PERIS0, 19, 0, 0), + GATE(tzpc2, "tzpc2", "aclk66_psgen", GATE_BUS_PERIS0, 20, 0, 0), + GATE(tzpc3, "tzpc3", "aclk66_psgen", GATE_BUS_PERIS0, 21, 0, 0), + GATE(tzpc4, "tzpc4", "aclk66_psgen", GATE_BUS_PERIS0, 22, 0, 0), + GATE(tzpc5, "tzpc5", "aclk66_psgen", GATE_BUS_PERIS0, 23, 0, 0), + GATE(tzpc6, "tzpc6", "aclk66_psgen", GATE_BUS_PERIS0, 24, 0, 0), + GATE(tzpc7, "tzpc7", "aclk66_psgen", GATE_BUS_PERIS0, 25, 0, 0), + GATE(tzpc8, "tzpc8", "aclk66_psgen", GATE_BUS_PERIS0, 26, 0, 0), + GATE(tzpc9, "tzpc9", "aclk66_psgen", GATE_BUS_PERIS0, 27, 0, 0), + + GATE(hdmi_cec, "hdmi_cec", "aclk66_psgen", GATE_BUS_PERIS1, 0, 0, 0), + GATE(seckey, "seckey", "aclk66_psgen", GATE_BUS_PERIS1, 1, 0, 0), + GATE(wdt, "wdt", "aclk66_psgen", GATE_BUS_PERIS1, 3, 0, 0), + GATE(rtc, "rtc", "aclk66_psgen", GATE_BUS_PERIS1, 4, 0, 0), + GATE(tmu, "tmu", "aclk66_psgen", GATE_BUS_PERIS1, 5, 0, 0), + GATE(tmu_gpu, "tmu_gpu", "aclk66_psgen", GATE_BUS_PERIS1, 6, 0, 0), + + GATE(gscl0, "gscl0", "aclk300_gscl", GATE_IP_GSCL0, 0, 0, 0), + GATE(gscl1, "gscl1", "aclk300_gscl", GATE_IP_GSCL0, 1, 0, 0), + GATE(clk_3aa, "clk_3aa", "aclk300_gscl", GATE_IP_GSCL0, 4, 0, 0), + + GATE(smmu_3aa, "smmu_3aa", "aclk333_432_gscl", GATE_IP_GSCL1, 2, 0, 0), + GATE(smmu_fimcl0, "smmu_fimcl0", "aclk333_432_gscl", + GATE_IP_GSCL1, 3, 0, 0), + GATE(smmu_fimcl1, "smmu_fimcl1", "aclk333_432_gscl", + GATE_IP_GSCL1, 4, 0, 0), + GATE(smmu_gscl0, "smmu_gscl0", "aclk300_gscl", GATE_IP_GSCL1, 6, 0, 0), + GATE(smmu_gscl1, "smmu_gscl1", "aclk300_gscl", GATE_IP_GSCL1, 7, 0, 0), + GATE(gscl_wa, "gscl_wa", "aclk300_gscl", GATE_IP_GSCL1, 12, 0, 0), + GATE(gscl_wb, "gscl_wb", "aclk300_gscl", GATE_IP_GSCL1, 13, 0, 0), + GATE(smmu_fimcl3, "smmu_fimcl3,", "aclk333_432_gscl", + GATE_IP_GSCL1, 16, 0, 0), + GATE(fimc_lite3, "fimc_lite3", "aclk333_432_gscl", + GATE_IP_GSCL1, 17, 0, 0), + + GATE(fimd1, "fimd1", "aclk300_disp1", GATE_IP_DISP1, 0, 0, 0), + GATE(dsim1, "dsim1", "aclk200_disp1", GATE_IP_DISP1, 3, 0, 0), + GATE(dp1, "dp1", "aclk200_disp1", GATE_IP_DISP1, 4, 0, 0), + GATE(mixer, "mixer", "aclk166", GATE_IP_DISP1, 5, 0, 0), + GATE(hdmi, "hdmi", "aclk200_disp1", GATE_IP_DISP1, 6, 0, 0), + GATE(smmu_fimd1, "smmu_fimd1", "aclk300_disp1", GATE_IP_DISP1, 8, 0, 0), + + GATE(mfc, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0), + GATE(smmu_mfcl, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0), + GATE(smmu_mfcr, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0), + + GATE(g3d, "g3d", "aclkg3d", GATE_IP_G3D, 9, 0, 0), + + GATE(rotator, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0), + GATE(jpeg, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0), + GATE(jpeg2, "jpeg2", "aclk300_jpeg", GATE_IP_GEN, 3, 0, 0), + GATE(mdma1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0), + GATE(smmu_rotator, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0), + GATE(smmu_jpeg, "smmu_jpeg", "aclk300_jpeg", GATE_IP_GEN, 7, 0, 0), + GATE(smmu_mdma1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0), + + GATE(mscl0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0), + GATE(mscl1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0), + GATE(mscl2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0), + GATE(smmu_mscl0, "smmu_mscl0", "aclk400_mscl", GATE_IP_MSCL, 8, 0, 0), + GATE(smmu_mscl1, "smmu_mscl1", "aclk400_mscl", GATE_IP_MSCL, 9, 0, 0), + GATE(smmu_mscl2, "smmu_mscl2", "aclk400_mscl", GATE_IP_MSCL, 10, 0, 0), +}; + +static __initdata struct of_device_id ext_clk_match[] = { + { .compatible = "samsung,exynos5420-oscclk", .data = (void *)0, }, + { }, +}; + +/* register exynos5420 clocks */ +void __init exynos5420_clk_init(struct device_node *np) +{ + void __iomem *reg_base; + struct clk *apll, *bpll, *cpll, *dpll, *epll, *ipll, *kpll, *mpll; + struct clk *rpll, *spll, *vpll; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } else { + panic("%s: unable to determine soc\n", __func__); + } + + samsung_clk_init(np, reg_base, nr_clks, + exynos5420_clk_regs, ARRAY_SIZE(exynos5420_clk_regs), + NULL, 0); + samsung_clk_of_register_fixed_ext(exynos5420_fixed_rate_ext_clks, + ARRAY_SIZE(exynos5420_fixed_rate_ext_clks), + ext_clk_match); + + apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll", + reg_base + 0x100); + bpll = samsung_clk_register_pll35xx("fout_bpll", "fin_pll", + reg_base + 0x20110); + cpll = samsung_clk_register_pll35xx("fout_cpll", "fin_pll", + reg_base + 0x10120); + dpll = samsung_clk_register_pll35xx("fout_dpll", "fin_pll", + reg_base + 0x10128); + epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll", + reg_base + 0x10130); + ipll = samsung_clk_register_pll35xx("fout_ipll", "fin_pll", + reg_base + 0x10150); + kpll = samsung_clk_register_pll35xx("fout_kpll", "fin_pll", + reg_base + 0x28100); + mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll", + reg_base + 0x10180); + rpll = samsung_clk_register_pll36xx("fout_rpll", "fin_pll", + reg_base + 0x10140); + spll = samsung_clk_register_pll35xx("fout_spll", "fin_pll", + reg_base + 0x10160); + vpll = samsung_clk_register_pll35xx("fout_vpll", "fin_pll", + reg_base + 0x10170); + + samsung_clk_register_fixed_rate(exynos5420_fixed_rate_clks, + ARRAY_SIZE(exynos5420_fixed_rate_clks)); + samsung_clk_register_fixed_factor(exynos5420_fixed_factor_clks, + ARRAY_SIZE(exynos5420_fixed_factor_clks)); + samsung_clk_register_mux(exynos5420_mux_clks, + ARRAY_SIZE(exynos5420_mux_clks)); + samsung_clk_register_div(exynos5420_div_clks, + ARRAY_SIZE(exynos5420_div_clks)); + samsung_clk_register_gate(exynos5420_gate_clks, + ARRAY_SIZE(exynos5420_gate_clks)); +} +CLK_OF_DECLARE(exynos5420_clk, "samsung,exynos5420-clock", exynos5420_clk_init); diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 662fcc065821..a70480409ea5 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -400,18 +400,6 @@ static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction mct_tick0_event_irq = { - .name = "mct_tick0_irq", - .flags = IRQF_TIMER | IRQF_NOBALANCING, - .handler = exynos4_mct_tick_isr, -}; - -static struct irqaction mct_tick1_event_irq = { - .name = "mct_tick1_irq", - .flags = IRQF_TIMER | IRQF_NOBALANCING, - .handler = exynos4_mct_tick_isr, -}; - static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt) { struct mct_clock_event_device *mevt; @@ -435,16 +423,15 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt) exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET); if (mct_int_type == MCT_INT_SPI) { - if (cpu == 0) { - mct_tick0_event_irq.dev_id = mevt; - evt->irq = mct_irqs[MCT_L0_IRQ]; - setup_irq(evt->irq, &mct_tick0_event_irq); - } else { - mct_tick1_event_irq.dev_id = mevt; - evt->irq = mct_irqs[MCT_L1_IRQ]; - setup_irq(evt->irq, &mct_tick1_event_irq); - irq_set_affinity(evt->irq, cpumask_of(1)); + evt->irq = mct_irqs[MCT_L0_IRQ + cpu]; + if (request_irq(evt->irq, exynos4_mct_tick_isr, + IRQF_TIMER | IRQF_NOBALANCING, + evt->name, mevt)) { + pr_err("exynos-mct: cannot register IRQ %d\n", + evt->irq); + return -EIO; } + irq_set_affinity(evt->irq, cpumask_of(cpu)); } else { enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0); } @@ -454,13 +441,9 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt) static void exynos4_local_timer_stop(struct clock_event_device *evt) { - unsigned int cpu = smp_processor_id(); evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); if (mct_int_type == MCT_INT_SPI) - if (cpu == 0) - remove_irq(evt->irq, &mct_tick0_event_irq); - else - remove_irq(evt->irq, &mct_tick1_event_irq); + free_irq(evt->irq, this_cpu_ptr(&percpu_mct_tick)); else disable_percpu_irq(mct_irqs[MCT_L0_IRQ]); } diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 0c8a9fa2be6c..94a91c2b7ca0 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1713,9 +1713,7 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { #define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL #endif -#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \ - defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) || \ - defined(CONFIG_SOC_EXYNOS5440) +#if defined(CONFIG_ARCH_EXYNOS) static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { .info = &(struct s3c24xx_uart_info) { .name = "Samsung Exynos4 UART", diff --git a/include/dt-bindings/clk/exynos-audss-clk.h b/include/dt-bindings/clk/exynos-audss-clk.h new file mode 100644 index 000000000000..8279f427c60f --- /dev/null +++ b/include/dt-bindings/clk/exynos-audss-clk.h @@ -0,0 +1,25 @@ +/* + * This header provides constants for Samsung audio subsystem + * clock controller. + * + * The constants defined in this header are being used in dts + * and exynos audss driver. + */ + +#ifndef _DT_BINDINGS_CLK_EXYNOS_AUDSS_H +#define _DT_BINDINGS_CLK_EXYNOS_AUDSS_H + +#define EXYNOS_MOUT_AUDSS 0 +#define EXYNOS_MOUT_I2S 1 +#define EXYNOS_DOUT_SRP 2 +#define EXYNOS_DOUT_AUD_BUS 3 +#define EXYNOS_DOUT_I2S 4 +#define EXYNOS_SRP_CLK 5 +#define EXYNOS_I2S_BUS 6 +#define EXYNOS_SCLK_I2S 7 +#define EXYNOS_PCM_BUS 8 +#define EXYNOS_SCLK_PCM 9 + +#define EXYNOS_AUDSS_MAX_CLKS 10 + +#endif |
