[POWERPC] qe: miscellaneous code improvements and fixes to the QE library

This patch makes numerous miscellaneous code improvements to the QE library.

1. Remove struct ucc_common and merge ucc_init_guemr() into ucc_set_type()
   (every caller of ucc_init_guemr() also calls ucc_set_type()).  Modify all
   callers of ucc_set_type() accordingly.

2. Remove the unused enum ucc_pram_initial_offset.

3. Refactor qe_setbrg(), also implement work-around for errata QE_General4.

4. Several printk() calls were missing the terminating \n.

5. Add __iomem where needed, and change u16 to __be16 and u32 to __be32 where
   appropriate.

6. In ucc_slow_init() the RBASE and TBASE registers in the PRAM were programmed
   with the wrong value.

7. Add the protocol type to struct us_info and updated ucc_slow_init() to
   use it, instead of always programming QE_CR_PROTOCOL_UNSPECIFIED.

8. Rename ucc_slow_restart_x() to ucc_slow_restart_tx()

9. Add several macros in qe.h (mostly for slow UCC support, but also to
   standardize some naming convention) and remove several unused macros.

10. Update ucc_geth.c to use the new macros.

11. Add ucc_slow_info.protocol to specify which QE_CR_PROTOCOL_xxx protcol
    to use when initializing the UCC in ucc_slow_init().

12. Rename ucc_slow_pram.rfcr to rbmr and ucc_slow_pram.tfcr to tbmr, since
    these are the real names of the registers.

13. Use the setbits, clrbits, and clrsetbits where appropriate.

14. Refactor ucc_set_qe_mux_rxtx().

15. Remove all instances of 'volatile'.

16. Simplify get_cmxucr_reg();

17. Replace qe_mux.cmxucrX with qe_mux.cmxucr[].

18. Updated struct ucc_geth because struct ucc_fast is not padded any more.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

12 files changed, 431 insertions, 412 deletions

diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 90f87408b5d5..3d57d3835b04 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -141,7 +141,7 @@ EXPORT_SYMBOL(qe_issue_cmd);
  * 16 BRGs, which can be connected to the QE channels or output
  * as clocks. The BRGs are in two different block of internal
  * memory mapped space.
- * The baud rate clock is the system clock divided by something.
+ * The BRG clock is the QE clock divided by 2.
  * It was set up long ago during the initial boot phase and is
  * is given to us.
  * Baud rate clocks are zero-based in the driver code (as that maps
@@ -165,28 +165,38 @@ unsigned int get_brg_clk(void)
 	return brg_clk;
 }
 
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
+/* Program the BRG to the given sampling rate and multiplier
+ *
+ * @brg: the BRG, 1-16
+ * @rate: the desired sampling rate
+ * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
+ * GUMR_L[TDCR].  E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
+ * then 'multiplier' should be 8.
+ *
+ * Also note that the value programmed into the BRGC register must be even.
  */
-void qe_setbrg(u32 brg, u32 rate)
+void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier)
 {
-	volatile u32 *bp;
 	u32 divisor, tempval;
-	int div16 = 0;
+	u32 div16 = 0;
 
-	bp = &qe_immr->brg.brgc[brg];
+	divisor = get_brg_clk() / (rate * multiplier);
 
-	divisor = (get_brg_clk() / rate);
 	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
-		div16 = 1;
+		div16 = QE_BRGC_DIV16;
 		divisor /= 16;
 	}
 
-	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
-	if (div16)
-		tempval |= QE_BRGC_DIV16;
+	/* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
+	   that the BRG divisor must be even if you're not using divide-by-16
+	   mode. */
+	if (!div16 && (divisor & 1))
+		divisor++;
+
+	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
+		QE_BRGC_ENABLE | div16;
 
-	out_be32(bp, tempval);
+	out_be32(&qe_immr->brg.brgc[brg - 1], tempval);
 }
 
 /* Initialize SNUMs (thread serial numbers) according to
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 55e6f394af82..9a2d1edd050e 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -405,8 +405,6 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags)
 		set_irq_data(qe_ic->virq_high, qe_ic);
 		set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high);
 	}
-
-	printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs);
 }
 
 void qe_ic_set_highest_priority(unsigned int virq, int high)
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index e32b45bf9ff5..a114cb0c572f 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -195,29 +195,22 @@ EXPORT_SYMBOL(par_io_of_config);
 #ifdef DEBUG
 static void dump_par_io(void)
 {
-	int i;
+	unsigned int i;
 
-	printk(KERN_INFO "PAR IO registars:\n");
-	printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io);
+	printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io);
 	for (i = 0; i < num_par_io_ports; i++) {
-		printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n",
-		       i, (u32) & par_io[i].cpodr,
-		       in_be32(&par_io[i].cpodr));
-		printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n",
-		       i, (u32) & par_io[i].cpdata,
-		       in_be32(&par_io[i].cpdata));
-		printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n",
-		       i, (u32) & par_io[i].cpdir1,
-		       in_be32(&par_io[i].cpdir1));
-		printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n",
-		       i, (u32) & par_io[i].cpdir2,
-		       in_be32(&par_io[i].cpdir2));
-		printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n",
-		       i, (u32) & par_io[i].cppar1,
-		       in_be32(&par_io[i].cppar1));
-		printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n",
-		       i, (u32) & par_io[i].cppar2,
-		       in_be32(&par_io[i].cppar2));
+		printk(KERN_INFO "	cpodr[%u]=%08x\n", i,
+			in_be32(&par_io[i].cpodr));
+		printk(KERN_INFO "	cpdata[%u]=%08x\n", i,
+			in_be32(&par_io[i].cpdata));
+		printk(KERN_INFO "	cpdir1[%u]=%08x\n", i,
+			in_be32(&par_io[i].cpdir1));
+		printk(KERN_INFO "	cpdir2[%u]=%08x\n", i,
+			in_be32(&par_io[i].cpdir2));
+		printk(KERN_INFO "	cppar1[%u]=%08x\n", i,
+			in_be32(&par_io[i].cppar1));
+		printk(KERN_INFO "	cppar2[%u]=%08x\n", i,
+			in_be32(&par_io[i].cppar2));
 	}
 
 }
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index f970e5415ac0..0e348d9af8a6 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -28,228 +28,188 @@
 
 static DEFINE_SPINLOCK(ucc_lock);
 
-int ucc_set_qe_mux_mii_mng(int ucc_num)
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
 {
 	unsigned long flags;
 
+	if (ucc_num > UCC_MAX_NUM - 1)
+		return -EINVAL;
+
 	spin_lock_irqsave(&ucc_lock, flags);
-	out_be32(&qe_immr->qmx.cmxgcr,
-		 ((in_be32(&qe_immr->qmx.cmxgcr) &
-		   ~QE_CMXGCR_MII_ENET_MNG) |
-		  (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT)));
+	clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
+		ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
 	spin_unlock_irqrestore(&ucc_lock, flags);
 
 	return 0;
 }
 EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
 
-int ucc_set_type(int ucc_num, struct ucc_common *regs,
-		 enum ucc_speed_type speed)
-{
-	u8 guemr = 0;
-
-	/* check if the UCC number is in range. */
-	if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
-		return -EINVAL;
-
-	guemr = regs->guemr;
-	guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX);
-	switch (speed) {
-	case UCC_SPEED_TYPE_SLOW:
-		guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX);
-		break;
-	case UCC_SPEED_TYPE_FAST:
-		guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX);
-		break;
-	default:
-		return -EINVAL;
-	}
-	regs->guemr = guemr;
-
-	return 0;
-}
-
-int ucc_init_guemr(struct ucc_common *regs)
+/* Configure the UCC to either Slow or Fast.
+ *
+ * A given UCC can be figured to support either "slow" devices (e.g. UART)
+ * or "fast" devices (e.g. Ethernet).
+ *
+ * 'ucc_num' is the UCC number, from 0 - 7.
+ *
+ * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
+ * must always be set to 1.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
 {
-	u8 guemr = 0;
-
-	if (!regs)
-		return -EINVAL;
-
-	/* Set bit 3 (which is reserved in the GUEMR register) to 1 */
-	guemr = UCC_GUEMR_SET_RESERVED3;
-
-	regs->guemr = guemr;
-
-	return 0;
-}
+	u8 __iomem *guemr;
 
-static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num,
-			   u8 * shift)
-{
+	/* The GUEMR register is at the same location for both slow and fast
+	   devices, so we just use uccX.slow.guemr. */
 	switch (ucc_num) {
-	case 0: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
-		*reg_num = 1;
-		*shift = 16;
+	case 0: guemr = &qe_immr->ucc1.slow.guemr;
 		break;
-	case 2: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
-		*reg_num = 1;
-		*shift = 0;
+	case 1: guemr = &qe_immr->ucc2.slow.guemr;
 		break;
-	case 4: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
-		*reg_num = 2;
-		*shift = 16;
+	case 2: guemr = &qe_immr->ucc3.slow.guemr;
 		break;
-	case 6: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
-		*reg_num = 2;
-		*shift = 0;
+	case 3: guemr = &qe_immr->ucc4.slow.guemr;
 		break;
-	case 1: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
-		*reg_num = 3;
-		*shift = 16;
+	case 4: guemr = &qe_immr->ucc5.slow.guemr;
 		break;
-	case 3: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
-		*reg_num = 3;
-		*shift = 0;
+	case 5: guemr = &qe_immr->ucc6.slow.guemr;
 		break;
-	case 5: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
-		*reg_num = 4;
-		*shift = 16;
+	case 6: guemr = &qe_immr->ucc7.slow.guemr;
 		break;
-	case 7: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
-		*reg_num = 4;
-		*shift = 0;
+	case 7: guemr = &qe_immr->ucc8.slow.guemr;
 		break;
 	default:
-		break;
+		return -EINVAL;
 	}
+
+	clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
+		UCC_GUEMR_SET_RESERVED3 | speed);
+
+	return 0;
+}
+
+static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
+	unsigned int *reg_num, unsigned int *shift)
+{
+	unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
+
+	*reg_num = cmx + 1;
+	*cmxucr = &qe_immr->qmx.cmxucr[cmx];
+	*shift = 16 - 8 * (ucc_num & 2);
 }
 
-int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask)
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 {
-	volatile u32 *p_cmxucr;
-	u8 reg_num;
-	u8 shift;
+	__be32 *cmxucr;
+	unsigned int reg_num;
+	unsigned int shift;
 
 	/* check if the UCC number is in range. */
-	if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+	if (ucc_num > UCC_MAX_NUM - 1)
 		return -EINVAL;
 
-	get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
+	get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
 
 	if (set)
-		out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift));
+		setbits32(cmxucr, mask << shift);
 	else
-		out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift));
+		clrbits32(cmxucr, mask << shift);
 
 	return 0;
 }
 
-int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode)
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+	enum comm_dir mode)
 {
-	volatile u32 *p_cmxucr;
-	u8 reg_num;
-	u8 shift;
-	u32 clock_bits;
-	u32 clock_mask;
-	int source = -1;
+	__be32 *cmxucr;
+	unsigned int reg_num;
+	unsigned int shift;
+	u32 clock_bits = 0;
 
 	/* check if the UCC number is in range. */
-	if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+	if (ucc_num > UCC_MAX_NUM - 1)
 		return -EINVAL;
 
-	if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
-		printk(KERN_ERR
-		       "ucc_set_qe_mux_rxtx: bad comm mode type passed.");
+	/* The communications direction must be RX or TX */
+	if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX)))
 		return -EINVAL;
-	}
 
-	get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
+	get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
 
 	switch (reg_num) {
 	case 1:
 		switch (clock) {
-		case QE_BRG1:	source = 1; break;
-		case QE_BRG2:	source = 2; break;
-		case QE_BRG7:	source = 3; break;
-		case QE_BRG8:	source = 4; break;
-		case QE_CLK9:	source = 5; break;
-		case QE_CLK10:	source = 6; break;
-		case QE_CLK11:	source = 7; break;
-		case QE_CLK12:	source = 8; break;
-		case QE_CLK15:	source = 9; break;
-		case QE_CLK16:	source = 10; break;
-		default: 	source = -1; break;
+		case QE_BRG1:	clock_bits = 1; break;
+		case QE_BRG2:	clock_bits = 2; break;
+		case QE_BRG7:	clock_bits = 3; break;
+		case QE_BRG8:	clock_bits = 4; break;
+		case QE_CLK9:	clock_bits = 5; break;
+		case QE_CLK10:	clock_bits = 6; break;
+		case QE_CLK11:	clock_bits = 7; break;
+		case QE_CLK12:	clock_bits = 8; break;
+		case QE_CLK15:	clock_bits = 9; break;
+		case QE_CLK16:	clock_bits = 10; break;
+		default: break;
 		}
 		break;
 	case 2:
 		switch (clock) {
-		case QE_BRG5:	source = 1; break;
-		case QE_BRG6:	source = 2; break;
-		case QE_BRG7:	source = 3; break;
-		case QE_BRG8:	source = 4; break;
-		case QE_CLK13:	source = 5; break;
-		case QE_CLK14:	source = 6; break;
-		case QE_CLK19:	source = 7; break;
-		case QE_CLK20:	source = 8; break;
-		case QE_CLK15:	source = 9; break;
-		case QE_CLK16:	source = 10; break;
-		default: 	source = -1; break;
+		case QE_BRG5:	clock_bits = 1; break;
+		case QE_BRG6:	clock_bits = 2; break;
+		case QE_BRG7:	clock_bits = 3; break;
+		case QE_BRG8:	clock_bits = 4; break;
+		case QE_CLK13:	clock_bits = 5; break;
+		case QE_CLK14:	clock_bits = 6; break;
+		case QE_CLK19:	clock_bits = 7; break;
+		case QE_CLK20:	clock_bits = 8; break;
+		case QE_CLK15:	clock_bits = 9; break;
+		case QE_CLK16:	clock_bits = 10; break;
+		default: break;
 		}
 		break;
 	case 3:
 		switch (clock) {
-		case QE_BRG9:	source = 1; break;
-		case QE_BRG10:	source = 2; break;
-		case QE_BRG15:	source = 3; break;
-		case QE_BRG16:	source = 4; break;
-		case QE_CLK3:	source = 5; break;
-		case QE_CLK4:	source = 6; break;
-		case QE_CLK17:	source = 7; break;
-		case QE_CLK18:	source = 8; break;
-		case QE_CLK7:	source = 9; break;
-		case QE_CLK8:	source = 10; break;
-		case QE_CLK16:	source = 11; break;
-		default:	source = -1; break;
+		case QE_BRG9:	clock_bits = 1; break;
+		case QE_BRG10:	clock_bits = 2; break;
+		case QE_BRG15:	clock_bits = 3; break;
+		case QE_BRG16:	clock_bits = 4; break;
+		case QE_CLK3:	clock_bits = 5; break;
+		case QE_CLK4:	clock_bits = 6; break;
+		case QE_CLK17:	clock_bits = 7; break;
+		case QE_CLK18:	clock_bits = 8; break;
+		case QE_CLK7:	clock_bits = 9; break;
+		case QE_CLK8:	clock_bits = 10; break;
+		case QE_CLK16:	clock_bits = 11; break;
+		default: break;
 		}
 		break;
 	case 4:
 		switch (clock) {
-		case QE_BRG13:	source = 1; break;
-		case QE_BRG14:	source = 2; break;
-		case QE_BRG15:	source = 3; break;
-		case QE_BRG16:	source = 4; break;
-		case QE_CLK5:	source = 5; break;
-		case QE_CLK6:	source = 6; break;
-		case QE_CLK21:	source = 7; break;
-		case QE_CLK22:	source = 8; break;
-		case QE_CLK7:	source = 9; break;
-		case QE_CLK8:	source = 10; break;
-		case QE_CLK16:	source = 11; break;
-		default: 	source = -1; break;
+		case QE_BRG13:	clock_bits = 1; break;
+		case QE_BRG14:	clock_bits = 2; break;
+		case QE_BRG15:	clock_bits = 3; break;
+		case QE_BRG16:	clock_bits = 4; break;
+		case QE_CLK5:	clock_bits = 5; break;
+		case QE_CLK6:	clock_bits = 6; break;
+		case QE_CLK21:	clock_bits = 7; break;
+		case QE_CLK22:	clock_bits = 8; break;
+		case QE_CLK7:	clock_bits = 9; break;
+		case QE_CLK8:	clock_bits = 10; break;
+		case QE_CLK16:	clock_bits = 11; break;
+		default: break;
 		}
 		break;
-	default:
-		source = -1;
-		break;
+	default: break;
 	}
 
-	if (source == -1) {
-		printk(KERN_ERR
-		     "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC.");
+	/* Check for invalid combination of clock and UCC number */
+	if (!clock_bits)
 		return -ENOENT;
-	}
 
-	clock_bits = (u32) source;
-	clock_mask = QE_CMXUCR_TX_CLK_SRC_MASK;
-	if (mode == COMM_DIR_RX) {
-		clock_bits <<= 4;  /* Rx field is 4 bits to left of Tx field */
-		clock_mask <<= 4;  /* Rx field is 4 bits to left of Tx field */
-	}
-	clock_bits <<= shift;
-	clock_mask <<= shift;
+	if (mode == COMM_DIR_RX)
+		shift += 4;
 
-	out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clock_mask) | clock_bits);
+	clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+		clock_bits << shift);
 
 	return 0;
 }
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 3df202e8d332..3223acbc39e5 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -30,46 +30,45 @@
 
 void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
 {
-	printk(KERN_INFO "UCC%d Fast registers:", uccf->uf_info->ucc_num);
-	printk(KERN_INFO "Base address: 0x%08x", (u32) uccf->uf_regs);
-
-	printk(KERN_INFO "gumr  : addr - 0x%08x, val - 0x%08x",
-		  (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
-	printk(KERN_INFO "upsmr : addr - 0x%08x, val - 0x%08x",
-		  (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
-	printk(KERN_INFO "utodr : addr - 0x%08x, val - 0x%04x",
-		  (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
-	printk(KERN_INFO "udsr  : addr - 0x%08x, val - 0x%04x",
-		  (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
-	printk(KERN_INFO "ucce  : addr - 0x%08x, val - 0x%08x",
-		  (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
-	printk(KERN_INFO "uccm  : addr - 0x%08x, val - 0x%08x",
-		  (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
-	printk(KERN_INFO "uccs  : addr - 0x%08x, val - 0x%02x",
-		  (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
-	printk(KERN_INFO "urfb  : addr - 0x%08x, val - 0x%08x",
-		  (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
-	printk(KERN_INFO "urfs  : addr - 0x%08x, val - 0x%04x",
-		  (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
-	printk(KERN_INFO "urfet : addr - 0x%08x, val - 0x%04x",
-		  (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
-	printk(KERN_INFO "urfset: addr - 0x%08x, val - 0x%04x",
-		  (u32) & uccf->uf_regs->urfset,
-		  in_be16(&uccf->uf_regs->urfset));
-	printk(KERN_INFO "utfb  : addr - 0x%08x, val - 0x%08x",
-		  (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
-	printk(KERN_INFO "utfs  : addr - 0x%08x, val - 0x%04x",
-		  (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
-	printk(KERN_INFO "utfet : addr - 0x%08x, val - 0x%04x",
-		  (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
-	printk(KERN_INFO "utftt : addr - 0x%08x, val - 0x%04x",
-		  (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
-	printk(KERN_INFO "utpt  : addr - 0x%08x, val - 0x%04x",
-		  (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
-	printk(KERN_INFO "urtry : addr - 0x%08x, val - 0x%08x",
-		  (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
-	printk(KERN_INFO "guemr : addr - 0x%08x, val - 0x%02x",
-		  (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+	printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
+	printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
+
+	printk(KERN_INFO "gumr  : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+	printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+	printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+	printk(KERN_INFO "udsr  : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+	printk(KERN_INFO "ucce  : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
+		  &uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+	printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+	printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
+	printk(KERN_INFO "utfb  : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+	printk(KERN_INFO "utfs  : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+	printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+	printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+	printk(KERN_INFO "utpt  : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
+		  &uccf->uf_regs->guemr, uccf->uf_regs->guemr);
 }
 EXPORT_SYMBOL(ucc_fast_dump_regs);
 
@@ -149,55 +148,57 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 
 	/* check if the UCC port number is in range. */
 	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
-		printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
+		printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	/* Check that 'max_rx_buf_length' is properly aligned (4). */
 	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: max_rx_buf_length not aligned", __FUNCTION__);
+		printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
+			__FUNCTION__);
 		return -EINVAL;
 	}
 
 	/* Validate Virtual Fifo register values */
 	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
-		printk(KERN_ERR "%s: urfs is too small", __FUNCTION__);
+		printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfs is not aligned", __FUNCTION__);
+		printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfet is not aligned.", __FUNCTION__);
+		printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfset is not aligned", __FUNCTION__);
+		printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utfs is not aligned", __FUNCTION__);
+		printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utfet is not aligned", __FUNCTION__);
+		printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utftt is not aligned", __FUNCTION__);
+		printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
 	if (!uccf) {
-		printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
+		printk(KERN_ERR "%s: Cannot allocate private data\n",
+			__FUNCTION__);
 		return -ENOMEM;
 	}
 
@@ -206,7 +207,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	/* Set the PHY base address */
 	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
 	if (uccf->uf_regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
+		printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
 		return -ENOMEM;
 	}
 
@@ -226,18 +227,10 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uccf->rx_discarded = 0;
 #endif				/* STATISTICS */
 
-	/* Init Guemr register */
-	if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) {
-		printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
-		ucc_fast_free(uccf);
-		return ret;
-	}
-
 	/* Set UCC to fast type */
-	if ((ret = ucc_set_type(uf_info->ucc_num,
-				(struct ucc_common *) (uf_regs),
-				UCC_SPEED_TYPE_FAST))) {
-		printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
+	ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
+	if (ret) {
+		printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__);
 		ucc_fast_free(uccf);
 		return ret;
 	}
@@ -276,7 +269,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uccf->ucc_fast_tx_virtual_fifo_base_offset =
 	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 	if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO", __FUNCTION__);
+		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
+			__FUNCTION__);
 		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
 		ucc_fast_free(uccf);
 		return -ENOMEM;
@@ -288,7 +282,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 			   UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
 			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 	if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO", __FUNCTION__);
+		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
+			__FUNCTION__);
 		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
 		ucc_fast_free(uccf);
 		return -ENOMEM;
@@ -318,7 +313,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 		if ((uf_info->rx_clock != QE_CLK_NONE) &&
 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
 					COMM_DIR_RX)) {
-			printk(KERN_ERR "%s: illegal value for RX clock",
+			printk(KERN_ERR "%s: illegal value for RX clock\n",
 			       __FUNCTION__);
 			ucc_fast_free(uccf);
 			return -EINVAL;
@@ -327,7 +322,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 		if ((uf_info->tx_clock != QE_CLK_NONE) &&
 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
 					COMM_DIR_TX)) {
-			printk(KERN_ERR "%s: illegal value for TX clock",
+			printk(KERN_ERR "%s: illegal value for TX clock\n",
 			       __FUNCTION__);
 			ucc_fast_free(uccf);
 			return -EINVAL;
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index 1f65c26ce63f..0174b3aeef8f 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -115,11 +115,15 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
 	out_be32(&us_regs->gumr_l, gumr_l);
 }
 
+/* Initialize the UCC for Slow operations
+ *
+ * The caller should initialize the following us_info
+ */
 int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
 {
 	struct ucc_slow_private *uccs;
 	u32 i;
-	struct ucc_slow *us_regs;
+	struct ucc_slow __iomem *us_regs;
 	u32 gumr;
 	struct qe_bd *bd;
 	u32 id;
@@ -131,7 +135,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 
 	/* check if the UCC port number is in range. */
 	if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
-		printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
+		printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
 		return -EINVAL;
 	}
 
@@ -143,13 +147,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	 */
 	if ((!us_info->rfw) &&
 		(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
-		printk(KERN_ERR "max_rx_buf_length not aligned.");
+		printk(KERN_ERR "max_rx_buf_length not aligned.\n");
 		return -EINVAL;
 	}
 
 	uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
 	if (!uccs) {
-		printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
+		printk(KERN_ERR "%s: Cannot allocate private data\n",
+			__FUNCTION__);
 		return -ENOMEM;
 	}
 
@@ -158,7 +163,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	/* Set the PHY base address */
 	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
 	if (uccs->us_regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
+		printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
 		return -ENOMEM;
 	}
 
@@ -182,22 +187,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		return -ENOMEM;
 	}
 	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
-	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
+	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol,
 		     uccs->us_pram_offset);
 
 	uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
 
-	/* Init Guemr register */
-	if ((ret = ucc_init_guemr((struct ucc_common *) us_regs))) {
-		printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
-		ucc_slow_free(uccs);
-		return ret;
-	}
-
 	/* Set UCC to slow type */
-	if ((ret = ucc_set_type(us_info->ucc_num,
-				(struct ucc_common *) us_regs,
-				UCC_SPEED_TYPE_SLOW))) {
+	ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
+	if (ret) {
 		printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
 		ucc_slow_free(uccs);
 		return ret;
@@ -212,7 +209,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
 				QE_ALIGNMENT_OF_BD);
 	if (IS_ERR_VALUE(uccs->rx_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__);
+		printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__,
+			us_info->rx_bd_ring_len);
 		uccs->rx_base_offset = 0;
 		ucc_slow_free(uccs);
 		return -ENOMEM;
@@ -292,12 +290,12 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 
 	/* if the data is in cachable memory, the 'global' */
 	/* in the function code should be set. */
-	uccs->us_pram->tfcr = uccs->us_pram->rfcr =
-		us_info->data_mem_part | QE_BMR_BYTE_ORDER_BO_MOT;
+	uccs->us_pram->tbmr = UCC_BMR_BO_BE;
+	uccs->us_pram->rbmr = UCC_BMR_BO_BE;
 
 	/* rbase, tbase are offsets from MURAM base */
-	out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
-	out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);
+	out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset);
+	out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset);
 
 	/* Mux clocking */
 	/* Grant Support */
@@ -311,7 +309,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		/* Rx clock routing */
 		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
 					COMM_DIR_RX)) {
-			printk(KERN_ERR "%s: illegal value for RX clock",
+			printk(KERN_ERR "%s: illegal value for RX clock\n",
 			       __FUNCTION__);
 			ucc_slow_free(uccs);
 			return -EINVAL;
@@ -319,7 +317,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		/* Tx clock routing */
 		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
 					COMM_DIR_TX)) {
-			printk(KERN_ERR "%s: illegal value for TX clock",
+			printk(KERN_ERR "%s: illegal value for TX clock\n",
 			       __FUNCTION__);
 			ucc_slow_free(uccs);
 			return -EINVAL;
@@ -343,8 +341,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		command = QE_INIT_TX;
 	else
 		command = QE_INIT_RX;	/* We know at least one is TRUE */
-	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
-	qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+	qe_issue_cmd(command, id, us_info->protocol, 0);
 
 	*uccs_ret = uccs;
 	return 0;
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 9a38dfe45f8f..7dedc9609603 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -2919,7 +2919,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
 	test = in_be16(&ugeth->p_tx_glbl_pram->temoder);
 
 	/* Function code register value to be used later */
-	function_code = QE_BMR_BYTE_ORDER_BO_MOT | UCC_FAST_FUNCTION_CODE_GBL;
+	function_code = UCC_BMR_BO_BE | UCC_BMR_GBL;
 	/* Required for QE */
 
 	/* function code register */
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index bb4dac8c0c65..1aa69023cde1 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -44,6 +44,7 @@
 
 struct ucc_geth {
 	struct ucc_fast uccf;
+	u8 res0[0x100 - sizeof(struct ucc_fast)];
 
 	u32 maccfg1;		/* mac configuration reg. 1 */
 	u32 maccfg2;		/* mac configuration reg. 2 */
diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h
index 02548f74ccb7..aba9806b31c9 100644
--- a/include/asm-powerpc/immap_qe.h
+++ b/include/asm-powerpc/immap_qe.h
@@ -97,10 +97,7 @@ struct qe_mux {
 	__be32	cmxsi1cr_l;	/* CMX SI1 clock route low register */
 	__be32	cmxsi1cr_h;	/* CMX SI1 clock route high register */
 	__be32	cmxsi1syr;	/* CMX SI1 SYNC route register */
-	__be32	cmxucr1;	/* CMX UCC1, UCC3 clock route register */
-	__be32	cmxucr2;	/* CMX UCC5, UCC7 clock route register */
-	__be32	cmxucr3;	/* CMX UCC2, UCC4 clock route register */
-	__be32	cmxucr4;	/* CMX UCC6, UCC8 clock route register */
+	__be32	cmxucr[4];	/* CMX UCCx clock route registers */
 	__be32	cmxupcr;	/* CMX UPC clock route register */
 	u8	res0[0x1C];
 } __attribute__ ((packed));
@@ -261,7 +258,6 @@ struct ucc_slow {
 	__be16	utpt;
 	u8	res4[0x52];
 	u8	guemr;		/* UCC general extended mode register */
-	u8	res5[0x200 - 0x091];
 } __attribute__ ((packed));
 
 /* QE UCC Fast */
@@ -294,21 +290,13 @@ struct ucc_fast {
 	__be32	urtry;		/* UCC retry counter register */
 	u8	res8[0x4C];
 	u8	guemr;		/* UCC general extended mode register */
-	u8	res9[0x100 - 0x091];
-} __attribute__ ((packed));
-
-/* QE UCC */
-struct ucc_common {
-	u8	res1[0x90];
-	u8	guemr;
-	u8	res2[0x200 - 0x091];
 } __attribute__ ((packed));
 
 struct ucc {
 	union {
 		struct	ucc_slow slow;
 		struct	ucc_fast fast;
-		struct	ucc_common common;
+		u8	res[0x200];	/* UCC blocks are 512 bytes each */
 	};
 } __attribute__ ((packed));
 
@@ -407,7 +395,7 @@ struct dbg {
 
 /* RISC Special Registers (Trap and Breakpoint) */
 struct rsp {
-	u8	fixme[0x100];
+	u32	reg[0x40];	/* 64 32-bit registers */
 } __attribute__ ((packed));
 
 struct qe_immap {
@@ -436,11 +424,13 @@ struct qe_immap {
 	u8			res13[0x600];
 	struct upc		upc2;		/* MultiPHY UTOPIA POS Ctrlr 2*/
 	struct sdma		sdma;		/* SDMA */
-	struct dbg		dbg;		/* Debug Space */
-	struct rsp		rsp[0x2];	/* RISC Special Registers
+	struct dbg		dbg;		/* 0x104080 - 0x1040FF
+						   Debug Space */
+	struct rsp		rsp[0x2];	/* 0x104100 - 0x1042FF
+						   RISC Special Registers
 						   (Trap and Breakpoint) */
-	u8			res14[0x300];
-	u8			res15[0x3A00];
+	u8			res14[0x300];	/* 0x104300 - 0x1045FF */
+	u8			res15[0x3A00];	/* 0x104600 - 0x107FFF */
 	u8			res16[0x8000];	/* 0x108000 - 0x110000 */
 	u8			muram[0xC000];	/* 0x110000 - 0x11C000
 						   Multi-user RAM */
@@ -451,7 +441,7 @@ struct qe_immap {
 extern struct qe_immap *qe_immr;
 extern phys_addr_t get_qe_base(void);
 
-static inline unsigned long immrbar_virt_to_phys(volatile void * address)
+static inline unsigned long immrbar_virt_to_phys(void *address)
 {
 	if ( ((u32)address >= (u32)qe_immr) &&
 			((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
index ad23c580631c..0dabe46a29d2 100644
--- a/include/asm-powerpc/qe.h
+++ b/include/asm-powerpc/qe.h
@@ -38,7 +38,7 @@ extern int par_io_data_set(u8 port, u8 pin, u8 val);
 
 /* QE internal API */
 int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
-void qe_setbrg(u32 brg, u32 rate);
+void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier);
 int qe_get_snum(void);
 void qe_put_snum(u8 snum);
 unsigned long qe_muram_alloc(int size, int align);
@@ -49,14 +49,28 @@ void *qe_muram_addr(unsigned long offset);
 
 /* Buffer descriptors */
 struct qe_bd {
-	u16 status;
-	u16 length;
-	u32 buf;
+	__be16 status;
+	__be16 length;
+	__be32 buf;
 } __attribute__ ((packed));
 
 #define BD_STATUS_MASK	0xffff0000
 #define BD_LENGTH_MASK	0x0000ffff
 
+#define BD_SC_EMPTY	0x8000	/* Receive is empty */
+#define BD_SC_READY	0x8000	/* Transmit is ready */
+#define BD_SC_WRAP	0x2000	/* Last buffer descriptor */
+#define BD_SC_INTRPT	0x1000	/* Interrupt on change */
+#define BD_SC_LAST	0x0800	/* Last buffer in frame */
+#define BD_SC_CM	0x0200	/* Continous mode */
+#define BD_SC_ID	0x0100	/* Rec'd too many idles */
+#define BD_SC_P		0x0100	/* xmt preamble */
+#define BD_SC_BR	0x0020	/* Break received */
+#define BD_SC_FR	0x0010	/* Framing error */
+#define BD_SC_PR	0x0008	/* Parity error */
+#define BD_SC_OV	0x0002	/* Overrun */
+#define BD_SC_CD	0x0001	/* ?? */
+
 /* Alignment */
 #define QE_INTR_TABLE_ALIGN	16	/* ??? */
 #define QE_ALIGNMENT_OF_BD	8
@@ -269,15 +283,12 @@ enum qe_clock {
 /* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
 #define QE_CR_PROTOCOL_UNSPECIFIED	0x00	/* For all other protocols */
 #define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
+#define QE_CR_PROTOCOL_QMC		0x02
+#define QE_CR_PROTOCOL_UART		0x04
 #define QE_CR_PROTOCOL_ATM_POS		0x0A
 #define QE_CR_PROTOCOL_ETHERNET		0x0C
 #define QE_CR_PROTOCOL_L2_SWITCH	0x0D
 
-/* BMR byte order */
-#define QE_BMR_BYTE_ORDER_BO_PPC	0x08	/* powerpc little endian */
-#define QE_BMR_BYTE_ORDER_BO_MOT	0x10	/* motorola big endian */
-#define QE_BMR_BYTE_ORDER_BO_MAX	0x18
-
 /* BRG configuration register */
 #define QE_BRGC_ENABLE		0x00010000
 #define QE_BRGC_DIVISOR_SHIFT	1
@@ -324,41 +335,41 @@ enum qe_clock {
 #define UPGCR_ADDR	0x10000000	/* Master MPHY Addr multiplexing */
 #define UPGCR_DIAG	0x01000000	/* Diagnostic mode */
 
-/* UCC */
+/* UCC GUEMR register */
 #define UCC_GUEMR_MODE_MASK_RX	0x02
-#define UCC_GUEMR_MODE_MASK_TX	0x01
 #define UCC_GUEMR_MODE_FAST_RX	0x02
-#define UCC_GUEMR_MODE_FAST_TX	0x01
 #define UCC_GUEMR_MODE_SLOW_RX	0x00
+#define UCC_GUEMR_MODE_MASK_TX	0x01
+#define UCC_GUEMR_MODE_FAST_TX	0x01
 #define UCC_GUEMR_MODE_SLOW_TX	0x00
+#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
 #define UCC_GUEMR_SET_RESERVED3	0x10	/* Bit 3 in the guemr is reserved but
 					   must be set 1 */
 
 /* structure representing UCC SLOW parameter RAM */
 struct ucc_slow_pram {
-	u16 rbase;		/* RX BD base address */
-	u16 tbase;		/* TX BD base address */
-	u8 rfcr;		/* Rx function code */
-	u8 tfcr;		/* Tx function code */
-	u16 mrblr;		/* Rx buffer length */
-	u32 rstate;		/* Rx internal state */
-	u32 rptr;		/* Rx internal data pointer */
-	u16 rbptr;		/* rb BD Pointer */
-	u16 rcount;		/* Rx internal byte count */
-	u32 rtemp;		/* Rx temp */
-	u32 tstate;		/* Tx internal state */
-	u32 tptr;		/* Tx internal data pointer */
-	u16 tbptr;		/* Tx BD pointer */
-	u16 tcount;		/* Tx byte count */
-	u32 ttemp;		/* Tx temp */
-	u32 rcrc;		/* temp receive CRC */
-	u32 tcrc;		/* temp transmit CRC */
+	__be16 rbase;		/* RX BD base address */
+	__be16 tbase;		/* TX BD base address */
+	u8 rbmr;		/* RX bus mode register (same as CPM's RFCR) */
+	u8 tbmr;		/* TX bus mode register (same as CPM's TFCR) */
+	__be16 mrblr;		/* Rx buffer length */
+	__be32 rstate;		/* Rx internal state */
+	__be32 rptr;		/* Rx internal data pointer */
+	__be16 rbptr;		/* rb BD Pointer */
+	__be16 rcount;		/* Rx internal byte count */
+	__be32 rtemp;		/* Rx temp */
+	__be32 tstate;		/* Tx internal state */
+	__be32 tptr;		/* Tx internal data pointer */
+	__be16 tbptr;		/* Tx BD pointer */
+	__be16 tcount;		/* Tx byte count */
+	__be32 ttemp;		/* Tx temp */
+	__be32 rcrc;		/* temp receive CRC */
+	__be32 tcrc;		/* temp transmit CRC */
 } __attribute__ ((packed));
 
 /* General UCC SLOW Mode Register (GUMRH & GUMRL) */
-#define UCC_SLOW_GUMR_H_CRC16		0x00004000
-#define UCC_SLOW_GUMR_H_CRC16CCITT	0x00000000
-#define UCC_SLOW_GUMR_H_CRC32CCITT	0x00008000
+#define UCC_SLOW_GUMR_H_SAM_QMC		0x00000000
+#define UCC_SLOW_GUMR_H_SAM_SATM	0x00008000
 #define UCC_SLOW_GUMR_H_REVD		0x00002000
 #define UCC_SLOW_GUMR_H_TRX		0x00001000
 #define UCC_SLOW_GUMR_H_TTX		0x00000800
@@ -378,9 +389,33 @@ struct ucc_slow_pram {
 #define UCC_SLOW_GUMR_L_TCI		0x10000000
 #define UCC_SLOW_GUMR_L_RINV		0x02000000
 #define UCC_SLOW_GUMR_L_TINV		0x01000000
-#define UCC_SLOW_GUMR_L_TEND		0x00020000
+#define UCC_SLOW_GUMR_L_TEND		0x00040000
+#define UCC_SLOW_GUMR_L_TDCR_MASK	0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_32	        0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_16	        0x00020000
+#define UCC_SLOW_GUMR_L_TDCR_8	        0x00010000
+#define UCC_SLOW_GUMR_L_TDCR_1	        0x00000000
+#define UCC_SLOW_GUMR_L_RDCR_MASK	0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_32		0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_16	        0x00008000
+#define UCC_SLOW_GUMR_L_RDCR_8	        0x00004000
+#define UCC_SLOW_GUMR_L_RDCR_1		0x00000000
+#define UCC_SLOW_GUMR_L_RENC_NRZI	0x00000800
+#define UCC_SLOW_GUMR_L_RENC_NRZ	0x00000000
+#define UCC_SLOW_GUMR_L_TENC_NRZI	0x00000100
+#define UCC_SLOW_GUMR_L_TENC_NRZ	0x00000000
+#define UCC_SLOW_GUMR_L_DIAG_MASK	0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_LE	        0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_ECHO	0x00000080
+#define UCC_SLOW_GUMR_L_DIAG_LOOP	0x00000040
+#define UCC_SLOW_GUMR_L_DIAG_NORM	0x00000000
 #define UCC_SLOW_GUMR_L_ENR		0x00000020
 #define UCC_SLOW_GUMR_L_ENT		0x00000010
+#define UCC_SLOW_GUMR_L_MODE_MASK	0x0000000F
+#define UCC_SLOW_GUMR_L_MODE_BISYNC	0x00000008
+#define UCC_SLOW_GUMR_L_MODE_AHDLC	0x00000006
+#define UCC_SLOW_GUMR_L_MODE_UART	0x00000004
+#define UCC_SLOW_GUMR_L_MODE_QMC	0x00000002
 
 /* General UCC FAST Mode Register */
 #define UCC_FAST_GUMR_TCI	0x20000000
@@ -397,53 +432,111 @@ struct ucc_slow_pram {
 #define UCC_FAST_GUMR_ENR	0x00000020
 #define UCC_FAST_GUMR_ENT	0x00000010
 
-/* Slow UCC Event Register (UCCE) */
-#define UCC_SLOW_UCCE_GLR	0x1000
-#define UCC_SLOW_UCCE_GLT	0x0800
-#define UCC_SLOW_UCCE_DCC	0x0400
-#define UCC_SLOW_UCCE_FLG	0x0200
-#define UCC_SLOW_UCCE_AB	0x0200
-#define UCC_SLOW_UCCE_IDLE	0x0100
-#define UCC_SLOW_UCCE_GRA	0x0080
-#define UCC_SLOW_UCCE_TXE	0x0010
-#define UCC_SLOW_UCCE_RXF	0x0008
-#define UCC_SLOW_UCCE_CCR	0x0008
-#define UCC_SLOW_UCCE_RCH	0x0008
-#define UCC_SLOW_UCCE_BSY	0x0004
-#define UCC_SLOW_UCCE_TXB	0x0002
-#define UCC_SLOW_UCCE_TX	0x0002
-#define UCC_SLOW_UCCE_RX	0x0001
-#define UCC_SLOW_UCCE_GOV	0x0001
-#define UCC_SLOW_UCCE_GUN	0x0002
-#define UCC_SLOW_UCCE_GINT	0x0004
-#define UCC_SLOW_UCCE_IQOV	0x0008
-
-#define UCC_SLOW_UCCE_HDLC_SET	(UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
-		UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF | \
-		UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
-#define UCC_SLOW_UCCE_ENET_SET	(UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
-		UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF)
-#define UCC_SLOW_UCCE_TRANS_SET	(UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
-		UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
-		UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
-#define UCC_SLOW_UCCE_UART_SET	(UCC_SLOW_UCCE_BSY | UCC_SLOW_UCCE_GRA | \
-		UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
-		UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
-#define UCC_SLOW_UCCE_QMC_SET	(UCC_SLOW_UCCE_IQOV | UCC_SLOW_UCCE_GINT | \
-		UCC_SLOW_UCCE_GUN | UCC_SLOW_UCCE_GOV)
-
-#define UCC_SLOW_UCCE_OTHER	(UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
-		UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | \
-		UCC_SLOW_UCCE_GLR)
-
-#define UCC_SLOW_INTR_TX	UCC_SLOW_UCCE_TXB
-#define UCC_SLOW_INTR_RX	(UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX)
-#define UCC_SLOW_INTR		(UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX)
+/* UART Slow UCC Event Register (UCCE) */
+#define UCC_UART_UCCE_AB	0x0200
+#define UCC_UART_UCCE_IDLE	0x0100
+#define UCC_UART_UCCE_GRA	0x0080
+#define UCC_UART_UCCE_BRKE	0x0040
+#define UCC_UART_UCCE_BRKS	0x0020
+#define UCC_UART_UCCE_CCR	0x0008
+#define UCC_UART_UCCE_BSY	0x0004
+#define UCC_UART_UCCE_TX	0x0002
+#define UCC_UART_UCCE_RX	0x0001
+
+/* HDLC Slow UCC Event Register (UCCE) */
+#define UCC_HDLC_UCCE_GLR	0x1000
+#define UCC_HDLC_UCCE_GLT	0x0800
+#define UCC_HDLC_UCCE_IDLE	0x0100
+#define UCC_HDLC_UCCE_BRKE	0x0040
+#define UCC_HDLC_UCCE_BRKS	0x0020
+#define UCC_HDLC_UCCE_TXE	0x0010
+#define UCC_HDLC_UCCE_RXF	0x0008
+#define UCC_HDLC_UCCE_BSY	0x0004
+#define UCC_HDLC_UCCE_TXB	0x0002
+#define UCC_HDLC_UCCE_RXB	0x0001
+
+/* BISYNC Slow UCC Event Register (UCCE) */
+#define UCC_BISYNC_UCCE_GRA	0x0080
+#define UCC_BISYNC_UCCE_TXE	0x0010
+#define UCC_BISYNC_UCCE_RCH	0x0008
+#define UCC_BISYNC_UCCE_BSY	0x0004
+#define UCC_BISYNC_UCCE_TXB	0x0002
+#define UCC_BISYNC_UCCE_RXB	0x0001
+
+/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
+#define UCC_GETH_UCCE_MPD       0x80000000
+#define UCC_GETH_UCCE_SCAR      0x40000000
+#define UCC_GETH_UCCE_GRA       0x20000000
+#define UCC_GETH_UCCE_CBPR      0x10000000
+#define UCC_GETH_UCCE_BSY       0x08000000
+#define UCC_GETH_UCCE_RXC       0x04000000
+#define UCC_GETH_UCCE_TXC       0x02000000
+#define UCC_GETH_UCCE_TXE       0x01000000
+#define UCC_GETH_UCCE_TXB7      0x00800000
+#define UCC_GETH_UCCE_TXB6      0x00400000
+#define UCC_GETH_UCCE_TXB5      0x00200000
+#define UCC_GETH_UCCE_TXB4      0x00100000
+#define UCC_GETH_UCCE_TXB3      0x00080000
+#define UCC_GETH_UCCE_TXB2      0x00040000
+#define UCC_GETH_UCCE_TXB1      0x00020000
+#define UCC_GETH_UCCE_TXB0      0x00010000
+#define UCC_GETH_UCCE_RXB7      0x00008000
+#define UCC_GETH_UCCE_RXB6      0x00004000
+#define UCC_GETH_UCCE_RXB5      0x00002000
+#define UCC_GETH_UCCE_RXB4      0x00001000
+#define UCC_GETH_UCCE_RXB3      0x00000800
+#define UCC_GETH_UCCE_RXB2      0x00000400
+#define UCC_GETH_UCCE_RXB1      0x00000200
+#define UCC_GETH_UCCE_RXB0      0x00000100
+#define UCC_GETH_UCCE_RXF7      0x00000080
+#define UCC_GETH_UCCE_RXF6      0x00000040
+#define UCC_GETH_UCCE_RXF5      0x00000020
+#define UCC_GETH_UCCE_RXF4      0x00000010
+#define UCC_GETH_UCCE_RXF3      0x00000008
+#define UCC_GETH_UCCE_RXF2      0x00000004
+#define UCC_GETH_UCCE_RXF1      0x00000002
+#define UCC_GETH_UCCE_RXF0      0x00000001
+
+/* UPSMR, when used as a UART */
+#define UCC_UART_UPSMR_FLC		0x8000
+#define UCC_UART_UPSMR_SL		0x4000
+#define UCC_UART_UPSMR_CL_MASK		0x3000
+#define UCC_UART_UPSMR_CL_8		0x3000
+#define UCC_UART_UPSMR_CL_7		0x2000
+#define UCC_UART_UPSMR_CL_6		0x1000
+#define UCC_UART_UPSMR_CL_5		0x0000
+#define UCC_UART_UPSMR_UM_MASK		0x0c00
+#define UCC_UART_UPSMR_UM_NORMAL	0x0000
+#define UCC_UART_UPSMR_UM_MAN_MULTI	0x0400
+#define UCC_UART_UPSMR_UM_AUTO_MULTI	0x0c00
+#define UCC_UART_UPSMR_FRZ		0x0200
+#define UCC_UART_UPSMR_RZS		0x0100
+#define UCC_UART_UPSMR_SYN		0x0080
+#define UCC_UART_UPSMR_DRT		0x0040
+#define UCC_UART_UPSMR_PEN		0x0010
+#define UCC_UART_UPSMR_RPM_MASK		0x000c
+#define UCC_UART_UPSMR_RPM_ODD		0x0000
+#define UCC_UART_UPSMR_RPM_LOW		0x0004
+#define UCC_UART_UPSMR_RPM_EVEN		0x0008
+#define UCC_UART_UPSMR_RPM_HIGH		0x000C
+#define UCC_UART_UPSMR_TPM_MASK		0x0003
+#define UCC_UART_UPSMR_TPM_ODD		0x0000
+#define UCC_UART_UPSMR_TPM_LOW		0x0001
+#define UCC_UART_UPSMR_TPM_EVEN		0x0002
+#define UCC_UART_UPSMR_TPM_HIGH		0x0003
 
 /* UCC Transmit On Demand Register (UTODR) */
 #define UCC_SLOW_TOD	0x8000
 #define UCC_FAST_TOD	0x8000
 
+/* UCC Bus Mode Register masks */
+/* Not to be confused with the Bundle Mode Register */
+#define UCC_BMR_GBL		0x20
+#define UCC_BMR_BO_BE		0x10
+#define UCC_BMR_CETM		0x04
+#define UCC_BMR_DTB		0x02
+#define UCC_BMR_BDB		0x01
+
 /* Function code masks */
 #define FC_GBL				0x20
 #define FC_DTB_LCL			0x02
diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h
index afe3076bdc03..46b09ba6bead 100644
--- a/include/asm-powerpc/ucc.h
+++ b/include/asm-powerpc/ucc.h
@@ -25,58 +25,38 @@
 /* Slow or fast type for UCCs.
 */
 enum ucc_speed_type {
-	UCC_SPEED_TYPE_FAST, UCC_SPEED_TYPE_SLOW
-};
-
-/* Initial UCCs Parameter RAM address relative to: MEM_MAP_BASE (IMMR).
-*/
-enum ucc_pram_initial_offset {
-	UCC_PRAM_OFFSET_UCC1 = 0x8400,
-	UCC_PRAM_OFFSET_UCC2 = 0x8500,
-	UCC_PRAM_OFFSET_UCC3 = 0x8600,
-	UCC_PRAM_OFFSET_UCC4 = 0x9000,
-	UCC_PRAM_OFFSET_UCC5 = 0x8000,
-	UCC_PRAM_OFFSET_UCC6 = 0x8100,
-	UCC_PRAM_OFFSET_UCC7 = 0x8200,
-	UCC_PRAM_OFFSET_UCC8 = 0x8300
+	UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
+	UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
 };
 
 /* ucc_set_type
  * Sets UCC to slow or fast mode.
  *
  * ucc_num - (In) number of UCC (0-7).
- * regs    - (In) pointer to registers base for the UCC.
  * speed   - (In) slow or fast mode for UCC.
  */
-int ucc_set_type(int ucc_num, struct ucc_common *regs,
-		 enum ucc_speed_type speed);
-
-/* ucc_init_guemr
- * Init the Guemr register.
- *
- * regs - (In) pointer to registers base for the UCC.
- */
-int ucc_init_guemr(struct ucc_common *regs);
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
 
-int ucc_set_qe_mux_mii_mng(int ucc_num);
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
 
-int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode);
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+	enum comm_dir mode);
 
-int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask);
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
 
 /* QE MUX clock routing for UCC
 */
-static inline int ucc_set_qe_mux_grant(int ucc_num, int set)
+static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
 {
 	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
 }
 
-static inline int ucc_set_qe_mux_tsa(int ucc_num, int set)
+static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
 {
 	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
 }
 
-static inline int ucc_set_qe_mux_bkpt(int ucc_num, int set)
+static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
 {
 	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
 }
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
index fdaac9d762bb..0980e6ad335b 100644
--- a/include/asm-powerpc/ucc_slow.h
+++ b/include/asm-powerpc/ucc_slow.h
@@ -148,9 +148,10 @@ enum ucc_slow_diag_mode {
 
 struct ucc_slow_info {
 	int ucc_num;
+	int protocol;			/* QE_CR_PROTOCOL_xxx */
 	enum qe_clock rx_clock;
 	enum qe_clock tx_clock;
-	u32 regs;
+	phys_addr_t regs;
 	int irq;
 	u16 uccm_mask;
 	int data_mem_part;
@@ -186,7 +187,7 @@ struct ucc_slow_info {
 
 struct ucc_slow_private {
 	struct ucc_slow_info *us_info;
-	struct ucc_slow *us_regs;	/* a pointer to memory map of UCC regs */
+	struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
 	struct ucc_slow_pram *us_pram;	/* a pointer to the parameter RAM */
 	u32 us_pram_offset;
 	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
@@ -277,12 +278,12 @@ void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
  */
 void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
 
-/* ucc_slow_restart_x
+/* ucc_slow_restart_tx
  * Restarts transmitting on a specified slow UCC.
  *
  * uccs - (In) pointer to the slow UCC structure.
  */
-void ucc_slow_restart_x(struct ucc_slow_private * uccs);
+void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
 
 u32 ucc_slow_get_qe_cr_subblock(int uccs_num);