Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6

9 files changed, 115 insertions, 70 deletions

diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index 36a9c42df835..76f4c7bad8b8 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -72,6 +72,9 @@ static void b43_led_brightness_set(struct led_classdev *led_dev,
 	struct b43_wldev *dev = led->dev;
 	bool radio_enabled;
 
+	if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED))
+		return;
+
 	/* Checking the radio-enabled status here is slightly racy,
 	 * but we want to avoid the locking overhead and we don't care
 	 * whether the LED has the wrong state for a second. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index fa4b0d8b74a2..a70827793086 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2883,12 +2883,11 @@ static int b43_op_tx(struct ieee80211_hw *hw,
 
 	if (unlikely(skb->len < 2 + 2 + 6)) {
 		/* Too short, this can't be a valid frame. */
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
+		goto drop_packet;
 	}
 	B43_WARN_ON(skb_shinfo(skb)->nr_frags);
 	if (unlikely(!dev))
-		return NETDEV_TX_BUSY;
+		goto drop_packet;
 
 	/* Transmissions on seperate queues can run concurrently. */
 	read_lock_irqsave(&wl->tx_lock, flags);
@@ -2904,7 +2903,12 @@ static int b43_op_tx(struct ieee80211_hw *hw,
 	read_unlock_irqrestore(&wl->tx_lock, flags);
 
 	if (unlikely(err))
-		return NETDEV_TX_BUSY;
+		goto drop_packet;
+	return NETDEV_TX_OK;
+
+drop_packet:
+	/* We can not transmit this packet. Drop it. */
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index c990f87b107a..93ddc1cbcc8b 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -876,6 +876,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
 	if (!ring)
 		goto out;
 	ring->type = type;
+	ring->dev = dev;
 
 	nr_slots = B43legacy_RXRING_SLOTS;
 	if (for_tx)
@@ -922,7 +923,6 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
 				 DMA_TO_DEVICE);
 	}
 
-	ring->dev = dev;
 	ring->nr_slots = nr_slots;
 	ring->mmio_base = b43legacy_dmacontroller_base(type, controller_index);
 	ring->index = controller_index;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 204077c13870..3e612d0a13e8 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2378,8 +2378,10 @@ static int b43legacy_op_tx(struct ieee80211_hw *hw,
 	} else
 		err = b43legacy_dma_tx(dev, skb, ctl);
 out:
-	if (unlikely(err))
-		return NETDEV_TX_BUSY;
+	if (unlikely(err)) {
+		/* Drop the packet. */
+		dev_kfree_skb_any(skb);
+	}
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 13925b627e3b..b1b3c523185d 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2227,7 +2227,10 @@ static int iwl3945_scan_initiate(struct iwl3945_priv *priv)
 	}
 
 	IWL_DEBUG_INFO("Starting scan...\n");
-	priv->scan_bands = 2;
+	if (priv->cfg->sku & IWL_SKU_G)
+		priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+	if (priv->cfg->sku & IWL_SKU_A)
+		priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
 	set_bit(STATUS_SCANNING, &priv->status);
 	priv->scan_start = jiffies;
 	priv->scan_pass_start = priv->scan_start;
@@ -3352,13 +3355,18 @@ static void iwl3945_rx_scan_complete_notif(struct iwl3945_priv *priv,
 	cancel_delayed_work(&priv->scan_check);
 
 	IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
-		       (priv->scan_bands == 2) ? "2.4" : "5.2",
+		       (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+							"2.4" : "5.2",
 		       jiffies_to_msecs(elapsed_jiffies
 					(priv->scan_pass_start, jiffies)));
 
-	/* Remove this scanned band from the list
-	 * of pending bands to scan */
-	priv->scan_bands--;
+	/* Remove this scanned band from the list of pending
+	 * bands to scan, band G precedes A in order of scanning
+	 * as seen in iwl3945_bg_request_scan */
+	if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+		priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+	else if (priv->scan_bands &  BIT(IEEE80211_BAND_5GHZ))
+		priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
 
 	/* If a request to abort was given, or the scan did not succeed
 	 * then we reset the scan state machine and terminate,
@@ -4972,7 +4980,7 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
 
 		ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel);
 		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+			IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
 				       scan_ch->channel);
 			continue;
 		}
@@ -6315,21 +6323,16 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 
 	/* flags + rate selection */
 
-	switch (priv->scan_bands) {
-	case 2:
+	if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
 		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
 		scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
 		scan->good_CRC_th = 0;
 		band = IEEE80211_BAND_2GHZ;
-		break;
-
-	case 1:
+	} else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
 		scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
 		scan->good_CRC_th = IWL_GOOD_CRC_TH;
 		band = IEEE80211_BAND_5GHZ;
-		break;
-
-	default:
+	} else {
 		IWL_WARNING("Invalid scan band count\n");
 		goto done;
 	}
@@ -6770,7 +6773,7 @@ static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co
 	ch_info = iwl3945_get_channel_info(priv, conf->channel->band,
 					   conf->channel->hw_value);
 	if (!is_channel_valid(ch_info)) {
-		IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n",
+		IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n",
 			       conf->channel->hw_value, conf->channel->band);
 		IWL_DEBUG_MAC80211("leave - invalid channel\n");
 		spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 883b42f7e998..5ed16ce78468 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -1774,7 +1774,10 @@ static int iwl4965_scan_initiate(struct iwl_priv *priv)
 	}
 
 	IWL_DEBUG_INFO("Starting scan...\n");
-	priv->scan_bands = 2;
+	if (priv->cfg->sku & IWL_SKU_G)
+		priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+	if (priv->cfg->sku & IWL_SKU_A)
+		priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
 	set_bit(STATUS_SCANNING, &priv->status);
 	priv->scan_start = jiffies;
 	priv->scan_pass_start = priv->scan_start;
@@ -3023,8 +3026,9 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 
 	IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
 	if (index != -1) {
-		int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index);
 #ifdef CONFIG_IWL4965_HT
+		int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index);
+
 		if (tid != MAX_TID_COUNT)
 			priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
 		if (iwl4965_queue_space(&txq->q) > txq->q.low_mark &&
@@ -3276,13 +3280,18 @@ static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv,
 	cancel_delayed_work(&priv->scan_check);
 
 	IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
-		       (priv->scan_bands == 2) ? "2.4" : "5.2",
+		       (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+						"2.4" : "5.2",
 		       jiffies_to_msecs(elapsed_jiffies
 					(priv->scan_pass_start, jiffies)));
 
-	/* Remove this scanned band from the list
-	 * of pending bands to scan */
-	priv->scan_bands--;
+	/* Remove this scanned band from the list of pending
+	 * bands to scan, band G precedes A in order of scanning
+	 * as seen in iwl_bg_request_scan */
+	if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+		priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+	else if (priv->scan_bands &  BIT(IEEE80211_BAND_5GHZ))
+		priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
 
 	/* If a request to abort was given, or the scan did not succeed
 	 * then we reset the scan state machine and terminate,
@@ -3292,7 +3301,7 @@ static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv,
 		clear_bit(STATUS_SCAN_ABORTING, &priv->status);
 	} else {
 		/* If there are more bands on this scan pass reschedule */
-		if (priv->scan_bands > 0)
+		if (priv->scan_bands)
 			goto reschedule;
 	}
 
@@ -4635,10 +4644,9 @@ static int iwl4965_get_channels_for_scan(struct iwl_priv *priv,
 
 		scan_ch->channel = ieee80211_frequency_to_channel(channels[i].center_freq);
 
-		ch_info = iwl_get_channel_info(priv, band,
-					 scan_ch->channel);
+		ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
 		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+			IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
 				       scan_ch->channel);
 			continue;
 		}
@@ -5830,8 +5838,7 @@ static void iwl4965_bg_request_scan(struct work_struct *data)
 	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 
 
-	switch (priv->scan_bands) {
-	case 2:
+	if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
 		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
 		scan->tx_cmd.rate_n_flags =
 				iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
@@ -5839,17 +5846,13 @@ static void iwl4965_bg_request_scan(struct work_struct *data)
 
 		scan->good_CRC_th = 0;
 		band = IEEE80211_BAND_2GHZ;
-		break;
-
-	case 1:
+	} else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
 		scan->tx_cmd.rate_n_flags =
 				iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
 				RATE_MCS_ANT_B_MSK);
 		scan->good_CRC_th = IWL_GOOD_CRC_TH;
 		band = IEEE80211_BAND_5GHZ;
-		break;
-
-	default:
+	} else {
 		IWL_WARNING("Invalid scan band count\n");
 		goto done;
 	}
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index fdbd0ef2be4b..61e59c17a60a 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -138,11 +138,8 @@ static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 	 * Wait until the BBP becomes ready.
 	 */
 	reg = rt2500usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
-		ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
-		mutex_unlock(&rt2x00dev->usb_cache_mutex);
-		return;
-	}
+	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+		goto exit_fail;
 
 	/*
 	 * Write the data into the BBP.
@@ -155,6 +152,13 @@ static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 	rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
 
 	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	return;
+
+exit_fail:
+	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
 }
 
 static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -168,10 +172,8 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 	 * Wait until the BBP becomes ready.
 	 */
 	reg = rt2500usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
-		ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
-		return;
-	}
+	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+		goto exit_fail;
 
 	/*
 	 * Write the request into the BBP.
@@ -186,17 +188,21 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 	 * Wait until the BBP becomes ready.
 	 */
 	reg = rt2500usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
-		ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
-		*value = 0xff;
-		mutex_unlock(&rt2x00dev->usb_cache_mutex);
-		return;
-	}
+	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+		goto exit_fail;
 
 	rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, &reg);
 	*value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
 
 	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	return;
+
+exit_fail:
+	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
+	*value = 0xff;
 }
 
 static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index fff8386e816b..83cc0147f698 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -134,11 +134,8 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 	 * Wait until the BBP becomes ready.
 	 */
 	reg = rt73usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
-		ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
-		mutex_unlock(&rt2x00dev->usb_cache_mutex);
-		return;
-	}
+	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
+		goto exit_fail;
 
 	/*
 	 * Write the data into the BBP.
@@ -151,6 +148,13 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 
 	rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
 	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	return;
+
+exit_fail:
+	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
 }
 
 static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -164,11 +168,8 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 	 * Wait until the BBP becomes ready.
 	 */
 	reg = rt73usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
-		ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
-		mutex_unlock(&rt2x00dev->usb_cache_mutex);
-		return;
-	}
+	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
+		goto exit_fail;
 
 	/*
 	 * Write the request into the BBP.
@@ -184,14 +185,19 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 	 * Wait until the BBP becomes ready.
 	 */
 	reg = rt73usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
-		ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
-		*value = 0xff;
-		return;
-	}
+	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
+		goto exit_fail;
 
 	*value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
 	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	return;
+
+exit_fail:
+	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
+	*value = 0xff;
 }
 
 static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 185488da2466..855bff4b3250 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -80,6 +80,23 @@ static const struct ieee80211_channel_range ieee80211_JP_channels[] = {
 				     IEEE80211_CHAN_RADAR),
 };
 
+static const struct ieee80211_channel_range ieee80211_EU_channels[] = {
+	/* IEEE 802.11b/g, channels 1..13 */
+	RANGE_PWR(2412, 2472, 20, 6, 0),
+	/* IEEE 802.11a, channel 36*/
+	RANGE_PWR(5180, 5180, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN),
+	/* IEEE 802.11a, channel 40*/
+	RANGE_PWR(5200, 5200, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN),
+	/* IEEE 802.11a, channel 44*/
+	RANGE_PWR(5220, 5220, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN),
+	/* IEEE 802.11a, channels 48..64 */
+	RANGE_PWR(5240, 5320, 23, 6, IEEE80211_CHAN_NO_IBSS |
+				     IEEE80211_CHAN_RADAR),
+	/* IEEE 802.11a, channels 100..140 */
+	RANGE_PWR(5500, 5700, 30, 6, IEEE80211_CHAN_NO_IBSS |
+				     IEEE80211_CHAN_RADAR),
+};
+
 #define REGDOM(_code)							\
 	{								\
 		.code = __stringify(_code),				\
@@ -90,6 +107,7 @@ static const struct ieee80211_channel_range ieee80211_JP_channels[] = {
 static const struct ieee80211_regdomain ieee80211_regdoms[] = {
 	REGDOM(US),
 	REGDOM(JP),
+	REGDOM(EU),
 };