i2c: Delete the broken i2c-ite bus driver

The rest of the ITE8172 support was already removed from MIPS tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>

10 files changed, 0 insertions, 1312 deletions

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 46f2a559b27c..031029e89fd9 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -216,17 +216,6 @@ Who:	Thomas Gleixner <tglx@linutronix.de>
 
 ---------------------------
 
-What:	i2c-ite and i2c-algo-ite drivers
-When:	September 2006
-Why:	These drivers never compiled since they were added to the kernel
-	tree 5 years ago. This feature removal can be reevaluated if
-	someone shows interest in the drivers, fixes them and takes over
-	maintenance.
-	http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
-Who:	Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
 What:	Bridge netfilter deferred IPv4/IPv6 output hook calling
 When:	January 2007
 Why:	The deferred output hooks are a layering violation causing unusual
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index c034820615bb..af0203409dd1 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -38,17 +38,6 @@ config I2C_ALGOPCA
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-algo-pca.
 
-config I2C_ALGOITE
-	tristate "ITE I2C Algorithm"
-	depends on MIPS_ITE8172 && I2C
-	help
-	  This supports the use of the ITE8172 I2C interface found on some MIPS
-	  systems. Say Y if you have one of these. You should also say Y for
-	  the ITE I2C peripheral driver support below.
-
-	  This support is also available as a module.  If so, the module 
-	  will be called i2c-algo-ite.
-
 config I2C_ALGO8XX
 	tristate "MPC8xx CPM I2C interface"
 	depends on 8xx && I2C
diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile
index 208be04a3dbd..cac1051bd4f1 100644
--- a/drivers/i2c/algos/Makefile
+++ b/drivers/i2c/algos/Makefile
@@ -5,7 +5,6 @@
 obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o
 obj-$(CONFIG_I2C_ALGOPCF)	+= i2c-algo-pcf.o
 obj-$(CONFIG_I2C_ALGOPCA)	+= i2c-algo-pca.o
-obj-$(CONFIG_I2C_ALGOITE)	+= i2c-algo-ite.o
 obj-$(CONFIG_I2C_ALGO_SGI)	+= i2c-algo-sgi.o
 
 ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c
deleted file mode 100644
index 70d8eefb5efc..000000000000
--- a/drivers/i2c/algos/i2c-algo-ite.c
+++ /dev/null
@@ -1,806 +0,0 @@
-/*
-   -------------------------------------------------------------------------
-   i2c-algo-ite.c i2c driver algorithms for ITE adapters	    
-   
-   Hai-Pao Fan, MontaVista Software, Inc.
-   hpfan@mvista.com or source@mvista.com
-
-   Copyright 2000 MontaVista Software Inc.
-
-   ---------------------------------------------------------------------------
-   This file was highly leveraged from i2c-algo-pcf.c, which was created
-   by Simon G. Vogl and Hans Berglund:
-
-
-     Copyright (C) 1995-1997 Simon G. Vogl
-                   1998-2000 Hans Berglund
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and 
-   Frodo Looijaard <frodol@dds.nl> ,and also from Martin Bailey
-   <mbailey@littlefeet-inc.com> */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-ite.h>
-#include "i2c-algo-ite.h"
-
-#define	PM_DSR		IT8172_PCI_IO_BASE + IT_PM_DSR
-#define	PM_IBSR		IT8172_PCI_IO_BASE + IT_PM_DSR + 0x04 
-#define GPIO_CCR	IT8172_PCI_IO_BASE + IT_GPCCR
-
-#define DEB2(x) if (i2c_debug>=2) x
-#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/
-#define DEF_TIMEOUT 16
-
-
-/* module parameters:
- */
-static int i2c_debug;
-static int iic_test;	/* see if the line-setting functions work	*/
-
-/* --- setting states on the bus with the right timing: ---------------	*/
-
-#define get_clock(adap) adap->getclock(adap->data)
-#define iic_outw(adap, reg, val) adap->setiic(adap->data, reg, val)
-#define iic_inw(adap, reg) adap->getiic(adap->data, reg)
-
-
-/* --- other auxiliary functions --------------------------------------	*/
-
-static void iic_start(struct i2c_algo_iic_data *adap)
-{
-	iic_outw(adap,ITE_I2CHCR,ITE_CMD);
-}
-
-static void iic_stop(struct i2c_algo_iic_data *adap)
-{
-	iic_outw(adap,ITE_I2CHCR,0);
-	iic_outw(adap,ITE_I2CHSR,ITE_I2CHSR_TDI);
-}
-
-static void iic_reset(struct i2c_algo_iic_data *adap)
-{
-	iic_outw(adap, PM_IBSR, iic_inw(adap, PM_IBSR) | 0x80);
-}
-
-
-static int wait_for_bb(struct i2c_algo_iic_data *adap)
-{
-	int timeout = DEF_TIMEOUT;
-	short status;
-
-	status = iic_inw(adap, ITE_I2CHSR);
-#ifndef STUB_I2C
-	while (timeout-- && (status & ITE_I2CHSR_HB)) {
-		udelay(1000); /* How much is this? */
-		status = iic_inw(adap, ITE_I2CHSR);
-	}
-#endif
-	if (timeout<=0) {
-		printk(KERN_ERR "Timeout, host is busy\n");
-		iic_reset(adap);
-	}
-	return(timeout<=0);
-}
-
-/* After we issue a transaction on the IIC bus, this function
- * is called.  It puts this process to sleep until we get an interrupt from
- * from the controller telling us that the transaction we requested in complete.
- */
-static int wait_for_pin(struct i2c_algo_iic_data *adap, short *status) {
-
-	int timeout = DEF_TIMEOUT;
-	
-	timeout = wait_for_bb(adap);
-	if (timeout) {
-  		DEB2(printk("Timeout waiting for host not busy\n");)
-  		return -EIO;
-	}                           
-	timeout = DEF_TIMEOUT;
-
-	*status = iic_inw(adap, ITE_I2CHSR);
-#ifndef STUB_I2C
-	while (timeout-- && !(*status & ITE_I2CHSR_TDI)) {
-	   adap->waitforpin();
-	   *status = iic_inw(adap, ITE_I2CHSR);
-	}
-#endif
-	if (timeout <= 0)
-		return(-1);
-	else
-		return(0);
-}
-
-static int wait_for_fe(struct i2c_algo_iic_data *adap, short *status)
-{
-	int timeout = DEF_TIMEOUT;
-
-	*status = iic_inw(adap, ITE_I2CFSR);
-#ifndef STUB_I2C 
-	while (timeout-- && (*status & ITE_I2CFSR_FE)) {
-		udelay(1000);
-		iic_inw(adap, ITE_I2CFSR);
-	}
-#endif
-	if (timeout <= 0) 
-		return(-1);
-	else
-		return(0);
-}
-
-static int iic_init (struct i2c_algo_iic_data *adap)
-{
-	short i;
-
-	/* Clear bit 7 to set I2C to normal operation mode */
-	i=iic_inw(adap, PM_DSR)& 0xff7f;
-	iic_outw(adap, PM_DSR, i);
-
-	/* set IT_GPCCR port C bit 2&3 as function 2 */
-	i = iic_inw(adap, GPIO_CCR) & 0xfc0f;
-	iic_outw(adap,GPIO_CCR,i);
-
-	/* Clear slave address/sub-address */
-	iic_outw(adap,ITE_I2CSAR, 0);
-	iic_outw(adap,ITE_I2CSSAR, 0);
-
-	/* Set clock counter register */
-	iic_outw(adap,ITE_I2CCKCNT, get_clock(adap));
-
-	/* Set START/reSTART/STOP time registers */
-	iic_outw(adap,ITE_I2CSHDR, 0x0a);
-	iic_outw(adap,ITE_I2CRSUR, 0x0a);
-	iic_outw(adap,ITE_I2CPSUR, 0x0a);
-
-	/* Enable interrupts on completing the current transaction */
-	iic_outw(adap,ITE_I2CHCR, ITE_I2CHCR_IE | ITE_I2CHCR_HCE);
-
-	/* Clear transfer count */
-	iic_outw(adap,ITE_I2CFBCR, 0x0);
-
-	DEB2(printk("iic_init: Initialized IIC on ITE 0x%x\n",
-		iic_inw(adap, ITE_I2CHSR)));
-	return 0;
-}
-
-
-/*
- * Sanity check for the adapter hardware - check the reaction of
- * the bus lines only if it seems to be idle.
- */
-static int test_bus(struct i2c_algo_iic_data *adap, char *name) {
-#if 0
-	int scl,sda;
-	sda=getsda(adap);
-	if (adap->getscl==NULL) {
-		printk("test_bus: Warning: Adapter can't read from clock line - skipping test.\n");
-		return 0;		
-	}
-	scl=getscl(adap);
-	printk("test_bus: Adapter: %s scl: %d  sda: %d -- testing...\n",
-	name,getscl(adap),getsda(adap));
-	if (!scl || !sda ) {
-		printk("test_bus: %s seems to be busy.\n",adap->name);
-		goto bailout;
-	}
-	sdalo(adap);
-	printk("test_bus:1 scl: %d  sda: %d\n", getscl(adap),
-	       getsda(adap));
-	if ( 0 != getsda(adap) ) {
-		printk("test_bus: %s SDA stuck high!\n",name);
-		sdahi(adap);
-		goto bailout;
-	}
-	if ( 0 == getscl(adap) ) {
-		printk("test_bus: %s SCL unexpected low while pulling SDA low!\n",
-			name);
-		goto bailout;
-	}		
-	sdahi(adap);
-	printk("test_bus:2 scl: %d  sda: %d\n", getscl(adap),
-	       getsda(adap));
-	if ( 0 == getsda(adap) ) {
-		printk("test_bus: %s SDA stuck low!\n",name);
-		sdahi(adap);
-		goto bailout;
-	}
-	if ( 0 == getscl(adap) ) {
-		printk("test_bus: %s SCL unexpected low while SDA high!\n",
-		       adap->name);
-	goto bailout;
-	}
-	scllo(adap);
-	printk("test_bus:3 scl: %d  sda: %d\n", getscl(adap),
-	       getsda(adap));
-	if ( 0 != getscl(adap) ) {
-
-		sclhi(adap);
-		goto bailout;
-	}
-	if ( 0 == getsda(adap) ) {
-		printk("test_bus: %s SDA unexpected low while pulling SCL low!\n",
-			name);
-		goto bailout;
-	}
-	sclhi(adap);
-	printk("test_bus:4 scl: %d  sda: %d\n", getscl(adap),
-	       getsda(adap));
-	if ( 0 == getscl(adap) ) {
-		printk("test_bus: %s SCL stuck low!\n",name);
-		sclhi(adap);
-		goto bailout;
-	}
-	if ( 0 == getsda(adap) ) {
-		printk("test_bus: %s SDA unexpected low while SCL high!\n",
-			name);
-		goto bailout;
-	}
-	printk("test_bus: %s passed test.\n",name);
-	return 0;
-bailout:
-	sdahi(adap);
-	sclhi(adap);
-	return -ENODEV;
-#endif
-	return (0);
-}
-
-/* ----- Utility functions
- */
-
-
-/* Verify the device we want to talk to on the IIC bus really exists. */
-static inline int try_address(struct i2c_algo_iic_data *adap,
-		       unsigned int addr, int retries)
-{
-	int i, ret = -1;
-	short status;
-
-	for (i=0;i<retries;i++) {
-		iic_outw(adap, ITE_I2CSAR, addr);
-		iic_start(adap);
-		if (wait_for_pin(adap, &status) == 0) {
-			if ((status & ITE_I2CHSR_DNE) == 0) { 
-				iic_stop(adap);
-				iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
-				ret=1;
-				break;	/* success! */
-			}
-		}
-		iic_stop(adap);
-		udelay(adap->udelay);
-	}
-	DEB2(if (i) printk("try_address: needed %d retries for 0x%x\n",i,
-	                   addr));
-	return ret;
-}
-
-
-static int iic_sendbytes(struct i2c_adapter *i2c_adap,const char *buf,
-                         int count)
-{
-	struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
-	int wrcount=0, timeout;
-	short status;
-	int loops, remainder, i, j;
-	union {
-		char byte[2];
-		unsigned short word;
-	} tmp;
-   
-	iic_outw(adap, ITE_I2CSSAR, (unsigned short)buf[wrcount++]);
-	count--;
-	if (count == 0)
-		return -EIO;
-
-	loops =  count / 32;		/* 32-byte FIFO */
-	remainder = count % 32;
-
-	if(loops) {
-		for(i=0; i<loops; i++) {
-
-			iic_outw(adap, ITE_I2CFBCR, 32);
-			for(j=0; j<32/2; j++) {
-				tmp.byte[1] = buf[wrcount++];
-				tmp.byte[0] = buf[wrcount++];
-				iic_outw(adap, ITE_I2CFDR, tmp.word); 
-			}
-
-			/* status FIFO overrun */
-			iic_inw(adap, ITE_I2CFSR);
-			iic_inw(adap, ITE_I2CFBCR);
-
-			iic_outw(adap, ITE_I2CHCR, ITE_WRITE);	/* Issue WRITE command */
-
-			/* Wait for transmission to complete */
-			timeout = wait_for_pin(adap, &status);
-			if(timeout) {
-				iic_stop(adap);
-				printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name);
-				return -EREMOTEIO; /* got a better one ?? */
-     	}
-			if (status & ITE_I2CHSR_DB) {
-				iic_stop(adap);
-				printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name);
-				return -EREMOTEIO; /* got a better one ?? */
-			}
-		}
-	}
-	if(remainder) {
-		iic_outw(adap, ITE_I2CFBCR, remainder);
-		for(i=0; i<remainder/2; i++) {
-			tmp.byte[1] = buf[wrcount++];
-			tmp.byte[0] = buf[wrcount++];
-			iic_outw(adap, ITE_I2CFDR, tmp.word);
-		}
-
-		/* status FIFO overrun */
-		iic_inw(adap, ITE_I2CFSR);
-		iic_inw(adap, ITE_I2CFBCR);
-
-		iic_outw(adap, ITE_I2CHCR, ITE_WRITE);  /* Issue WRITE command */
-
-		timeout = wait_for_pin(adap, &status);
-		if(timeout) {
-			iic_stop(adap);
-			printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name);
-			return -EREMOTEIO; /* got a better one ?? */
-		}
-#ifndef STUB_I2C
-		if (status & ITE_I2CHSR_DB) { 
-			iic_stop(adap);
-			printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name);
-			return -EREMOTEIO; /* got a better one ?? */
-		}
-#endif
-	}
-	iic_stop(adap);
-	return wrcount;
-}
-
-
-static int iic_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count,
-	int sread)
-{
-	int rdcount=0, i, timeout;
-	short status;
-	struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
-	int loops, remainder, j;
-	union {
-		char byte[2];
-		unsigned short word;
-	} tmp;
-		
-	loops = count / 32;				/* 32-byte FIFO */
-	remainder = count % 32;
-
-	if(loops) {
-		for(i=0; i<loops; i++) {
-			iic_outw(adap, ITE_I2CFBCR, 32);
-			if (sread)
-				iic_outw(adap, ITE_I2CHCR, ITE_SREAD);
-			else
-				iic_outw(adap, ITE_I2CHCR, ITE_READ);		/* Issue READ command */
-
-			timeout = wait_for_pin(adap, &status);
-			if(timeout) {
-				iic_stop(adap);
-				printk("iic_readbytes:  %s read timeout.\n", i2c_adap->name);
-				return (-1);
-			}
-#ifndef STUB_I2C
-			if (status & ITE_I2CHSR_DB) {
-				iic_stop(adap);
-				printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name);
-				return (-1);
-			}
-#endif
-
-			timeout = wait_for_fe(adap, &status);
-			if(timeout) {
-				iic_stop(adap);
-				printk("iic_readbytes:  %s FIFO is empty\n", i2c_adap->name);
-				return (-1); 
-			}
-
-			for(j=0; j<32/2; j++) {
-				tmp.word = iic_inw(adap, ITE_I2CFDR);
-				buf[rdcount++] = tmp.byte[1];
-				buf[rdcount++] = tmp.byte[0];
-			}
-
-			/* status FIFO underrun */
-			iic_inw(adap, ITE_I2CFSR);
-
-		}
-	}
-
-
-	if(remainder) {
-		remainder=(remainder+1)/2 * 2;
-		iic_outw(adap, ITE_I2CFBCR, remainder);
-		if (sread)
-			iic_outw(adap, ITE_I2CHCR, ITE_SREAD);
-		else
-		iic_outw(adap, ITE_I2CHCR, ITE_READ);		/* Issue READ command */
-
-		timeout = wait_for_pin(adap, &status);
-		if(timeout) {
-			iic_stop(adap);
-			printk("iic_readbytes:  %s read timeout.\n", i2c_adap->name);
-			return (-1);
-		}
-#ifndef STUB_I2C
-		if (status & ITE_I2CHSR_DB) {
-			iic_stop(adap);
-			printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name);
-			return (-1);
-		}
-#endif
-		timeout = wait_for_fe(adap, &status);
-		if(timeout) {
-			iic_stop(adap);
-			printk("iic_readbytes:  %s FIFO is empty\n", i2c_adap->name);
-			return (-1);
-		}         
-
-		for(i=0; i<(remainder+1)/2; i++) {
-			tmp.word = iic_inw(adap, ITE_I2CFDR);
-			buf[rdcount++] = tmp.byte[1];
-			buf[rdcount++] = tmp.byte[0];
-		}
-
-		/* status FIFO underrun */
-		iic_inw(adap, ITE_I2CFSR);
-
-	}
-
-	iic_stop(adap);
-	return rdcount;
-}
-
-
-/* This function implements combined transactions.  Combined
- * transactions consist of combinations of reading and writing blocks of data.
- * Each transfer (i.e. a read or a write) is separated by a repeated start
- * condition.
- */
-#if 0
-static int iic_combined_transaction(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) 
-{
-   int i;
-   struct i2c_msg *pmsg;
-   int ret;
-
-   DEB2(printk("Beginning combined transaction\n"));
-
-   for(i=0; i<(num-1); i++) {
-      pmsg = &msgs[i];
-      if(pmsg->flags & I2C_M_RD) {
-         DEB2(printk("  This one is a read\n"));
-         ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER);
-      }
-      else if(!(pmsg->flags & I2C_M_RD)) {
-         DEB2(printk("This one is a write\n"));
-         ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER);
-      }
-   }
-   /* Last read or write segment needs to be terminated with a stop */
-   pmsg = &msgs[i];
-
-   if(pmsg->flags & I2C_M_RD) {
-      DEB2(printk("Doing the last read\n"));
-      ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
-   }
-   else if(!(pmsg->flags & I2C_M_RD)) {
-      DEB2(printk("Doing the last write\n"));
-      ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
-   }
-
-   return ret;
-}
-#endif
-
-
-/* Whenever we initiate a transaction, the first byte clocked
- * onto the bus after the start condition is the address (7 bit) of the
- * device we want to talk to.  This function manipulates the address specified
- * so that it makes sense to the hardware when written to the IIC peripheral.
- *
- * Note: 10 bit addresses are not supported in this driver, although they are
- * supported by the hardware.  This functionality needs to be implemented.
- */
-static inline int iic_doAddress(struct i2c_algo_iic_data *adap,
-                                struct i2c_msg *msg, int retries) 
-{
-	unsigned short flags = msg->flags;
-	unsigned int addr;
-	int ret;
-
-/* Ten bit addresses not supported right now */
-	if ( (flags & I2C_M_TEN)  ) { 
-#if 0
-		addr = 0xf0 | (( msg->addr >> 7) & 0x03);
-		DEB2(printk("addr0: %d\n",addr));
-		ret = try_address(adap, addr, retries);
-		if (ret!=1) {
-			printk("iic_doAddress: died at extended address code.\n");
-			return -EREMOTEIO;
-		}
-		iic_outw(adap,msg->addr & 0x7f);
-		if (ret != 1) {
-			printk("iic_doAddress: died at 2nd address code.\n");
-			return -EREMOTEIO;
-		}
-		if ( flags & I2C_M_RD ) {
-			i2c_repstart(adap);
-			addr |= 0x01;
-			ret = try_address(adap, addr, retries);
-			if (ret!=1) {
-				printk("iic_doAddress: died at extended address code.\n");
-				return -EREMOTEIO;
-			}
-		}
-#endif
-	} else {
-
-		addr = ( msg->addr << 1 );
-
-#if 0
-		if (flags & I2C_M_RD )
-			addr |= 1;
-		if (flags & I2C_M_REV_DIR_ADDR )
-			addr ^= 1;
-#endif
-
-		if (iic_inw(adap, ITE_I2CSAR) != addr) {
-			iic_outw(adap, ITE_I2CSAR, addr);
-			ret = try_address(adap, addr, retries);
-			if (ret!=1) {
-				printk("iic_doAddress: died at address code.\n");
-				return -EREMOTEIO;
-			}
-		}
-
-  }
-
-	return 0;
-}
-
-
-/* Description: Prepares the controller for a transaction (clearing status
- * registers, data buffers, etc), and then calls either iic_readbytes or
- * iic_sendbytes to do the actual transaction.
- *
- * still to be done: Before we issue a transaction, we should
- * verify that the bus is not busy or in some unknown state.
- */
-static int iic_xfer(struct i2c_adapter *i2c_adap,
-		    struct i2c_msg *msgs, 
-		    int num)
-{
-	struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
-	struct i2c_msg *pmsg;
-	int i = 0;
-	int ret, timeout;
-    
-	pmsg = &msgs[i];
-
-	if(!pmsg->len) {
-		DEB2(printk("iic_xfer: read/write length is 0\n");)
-		return -EIO;
-	}
-	if(!(pmsg->flags & I2C_M_RD) && (!(pmsg->len)%2) ) {
-		DEB2(printk("iic_xfer: write buffer length is not odd\n");)
-		return -EIO; 
-	}
-
-	/* Wait for any pending transfers to complete */
-	timeout = wait_for_bb(adap);
-	if (timeout) {
-		DEB2(printk("iic_xfer: Timeout waiting for host not busy\n");)
-		return -EIO;
-	}
-
-	/* Flush FIFO */
-	iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
-
-	/* Load address */
-	ret = iic_doAddress(adap, pmsg, i2c_adap->retries);
-	if (ret)
-		return -EIO;
-
-#if 0
-	/* Combined transaction (read and write) */
-	if(num > 1) {
-           DEB2(printk("iic_xfer: Call combined transaction\n"));
-           ret = iic_combined_transaction(i2c_adap, msgs, num);
-  }
-#endif
-
-	DEB3(printk("iic_xfer: Msg %d, addr=0x%x, flags=0x%x, len=%d\n",
-		i, msgs[i].addr, msgs[i].flags, msgs[i].len);)
-
-	if(pmsg->flags & I2C_M_RD) 		/* Read */
-		ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, 0);
-	else {													/* Write */ 
-		udelay(1000);
-		ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len);
-	}
-
-	if (ret != pmsg->len)
-		DEB3(printk("iic_xfer: error or fail on read/write %d bytes.\n",ret)); 
-	else
-		DEB3(printk("iic_xfer: read/write %d bytes.\n",ret));
-
-	return ret;
-}
-
-
-/* Implements device specific ioctls.  Higher level ioctls can
- * be found in i2c-core.c and are typical of any i2c controller (specifying
- * slave address, timeouts, etc).  These ioctls take advantage of any hardware
- * features built into the controller for which this algorithm-adapter set
- * was written.  These ioctls allow you to take control of the data and clock
- * lines and set the either high or low,
- * similar to a GPIO pin.
- */
-static int algo_control(struct i2c_adapter *adapter, 
-	unsigned int cmd, unsigned long arg)
-{
-
-  struct i2c_algo_iic_data *adap = adapter->algo_data;
-  struct i2c_iic_msg s_msg;
-  char *buf;
-	int ret;
-
-  if (cmd == I2C_SREAD) {
-		if(copy_from_user(&s_msg, (struct i2c_iic_msg *)arg, 
-				sizeof(struct i2c_iic_msg))) 
-			return -EFAULT;
-		buf = kmalloc(s_msg.len, GFP_KERNEL);
-		if (buf== NULL)
-			return -ENOMEM;
-
-		/* Flush FIFO */
-		iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
-
-		/* Load address */
-		iic_outw(adap, ITE_I2CSAR,s_msg.addr<<1);
-		iic_outw(adap, ITE_I2CSSAR,s_msg.waddr & 0xff);
-
-		ret = iic_readbytes(adapter, buf, s_msg.len, 1);
-		if (ret>=0) {
-			if(copy_to_user( s_msg.buf, buf, s_msg.len) ) 
-				ret = -EFAULT;
-		}
-		kfree(buf);
-	}
-	return 0;
-}
-
-
-static u32 iic_func(struct i2c_adapter *adap)
-{
-	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | 
-	       I2C_FUNC_PROTOCOL_MANGLING; 
-}
-
-/* -----exported algorithm data: -------------------------------------	*/
-
-static struct i2c_algorithm iic_algo = {
-	.master_xfer	= iic_xfer,
-	.algo_control	= algo_control, /* ioctl */
-	.functionality	= iic_func,
-};
-
-
-/* 
- * registering functions to load algorithms at runtime 
- */
-int i2c_iic_add_bus(struct i2c_adapter *adap)
-{
-	struct i2c_algo_iic_data *iic_adap = adap->algo_data;
-
-	if (iic_test) {
-		int ret = test_bus(iic_adap, adap->name);
-		if (ret<0)
-			return -ENODEV;
-	}
-
-	DEB2(printk("i2c-algo-ite: hw routines for %s registered.\n",
-	            adap->name));
-
-	/* register new adapter to i2c module... */
-	adap->algo = &iic_algo;
-
-	adap->timeout = 100;	/* default values, should	*/
-	adap->retries = 3;		/* be replaced by defines	*/
-	adap->flags = 0;
-
-	iic_init(iic_adap);
-	return i2c_add_adapter(adap);
-}
-
-
-int i2c_iic_del_bus(struct i2c_adapter *adap)
-{
-	int res;
-	if ((res = i2c_del_adapter(adap)) < 0)
-		return res;
-	DEB2(printk("i2c-algo-ite: adapter unregistered: %s\n",adap->name));
-
-	return 0;
-}
-
-
-int __init i2c_algo_iic_init (void)
-{
-	printk(KERN_INFO "ITE iic (i2c) algorithm module\n");
-	return 0;
-}
-
-
-void i2c_algo_iic_exit(void)
-{
-	return;
-}
-
-
-EXPORT_SYMBOL(i2c_iic_add_bus);
-EXPORT_SYMBOL(i2c_iic_del_bus);
-
-/* The MODULE_* macros resolve to nothing if MODULES is not defined
- * when this file is compiled.
- */
-MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
-MODULE_DESCRIPTION("ITE iic algorithm");
-MODULE_LICENSE("GPL");
-
-module_param(iic_test, bool, 0);
-module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
-
-MODULE_PARM_DESC(iic_test, "Test if the I2C bus is available");
-MODULE_PARM_DESC(i2c_debug,
-        "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol");
-
-
-/* This function resolves to init_module (the function invoked when a module
- * is loaded via insmod) when this file is compiled with MODULES defined.
- * Otherwise (i.e. if you want this driver statically linked to the kernel),
- * a pointer to this function is stored in a table and called
- * during the initialization of the kernel (in do_basic_setup in /init/main.c) 
- *
- * All this functionality is complements of the macros defined in linux/init.h
- */
-module_init(i2c_algo_iic_init);
-
-
-/* If MODULES is defined when this file is compiled, then this function will
- * resolved to cleanup_module.
- */
-module_exit(i2c_algo_iic_exit);
diff --git a/drivers/i2c/algos/i2c-algo-ite.h b/drivers/i2c/algos/i2c-algo-ite.h
deleted file mode 100644
index a8ca3c9b546a..000000000000
--- a/drivers/i2c/algos/i2c-algo-ite.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
-   --------------------------------------------------------------------
-   i2c-ite.h: Global defines for the I2C controller on board the    
-                 ITE MIPS processor.                                
-   --------------------------------------------------------------------
-   Hai-Pao Fan, MontaVista Software, Inc.
-   hpfan@mvista.com or source@mvista.com
-
-   Copyright 2001 MontaVista Software Inc.
-
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
-
- */
-
-#ifndef I2C_ITE_H
-#define I2C_ITE_H 1
-
-#include <asm/it8172/it8172.h>
-
-/* I2C Registers */
-#define ITE_I2CHCR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30
-#define ITE_I2CHSR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34
-#define ITE_I2CSAR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38
-#define ITE_I2CSSAR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c
-#define ITE_I2CCKCNT	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48
-#define ITE_I2CSHDR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c
-#define ITE_I2CRSUR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50
-#define ITE_I2CPSUR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54
-
-#define ITE_I2CFDR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70
-#define ITE_I2CFBCR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74
-#define ITE_I2CFCR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78
-#define ITE_I2CFSR	IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c
-
-
-/* Host Control Register ITE_I2CHCR */
-#define	ITE_I2CHCR_HCE	0x01	/* Enable I2C Host Controller */
-#define	ITE_I2CHCR_IE	0x02	/* Enable the interrupt after completing
-				   the current transaction */
-#define ITE_I2CHCR_CP_W	0x00	/* bit2-4 000 - Write */
-#define	ITE_I2CHCR_CP_R	0x08	/*	  010 - Current address read */
-#define	ITE_I2CHCR_CP_S	0x10	/*	  100 - Sequential read */
-#define ITE_I2CHCR_ST	0x20	/* Initiates the I2C host controller to execute
-				   the command and send the data programmed in
-				   all required registers to I2C bus */
-#define ITE_CMD		ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST
-#define ITE_WRITE	ITE_CMD | ITE_I2CHCR_CP_W
-#define ITE_READ	ITE_CMD | ITE_I2CHCR_CP_R
-#define ITE_SREAD	ITE_CMD | ITE_I2CHCR_CP_S
-
-/* Host Status Register ITE_I2CHSR */
-#define	ITE_I2CHSR_DB	0x01	/* Device is busy, receives NACK response except
-				   in the first and last bytes */
-#define	ITE_I2CHSR_DNE	0x02	/* Target address on I2C bus does not exist */
-#define	ITE_I2CHSR_TDI	0x04	/* R/W Transaction on I2C bus was completed */
-#define	ITE_I2CHSR_HB	0x08	/* Host controller is processing transactions */
-#define	ITE_I2CHSR_FER	0x10	/* Error occurs in the FIFO */
-
-/* Slave Address Register ITE_I2CSAR */
-#define	ITE_I2CSAR_SA_MASK	0xfe	/* Target I2C device address */
-#define	ITE_I2CSAR_ASO		0x0100	/* Output 1/0 to I2CAS port when the
-					   next slave address is addressed */
-
-/* Slave Sub-address Register ITE_I2CSSAR */
-#define	ITE_I2CSSAR_SUBA_MASK	0xff	/* Target I2C device sub-address */
-
-/* Clock Counter Register ITE_I2CCKCNT */
-#define	ITE_I2CCKCNT_STOP	0x00	/* stop I2C clock */
-#define	ITE_I2CCKCNT_HPCC_MASK	0x7f	/* SCL high period counter */
-#define	ITE_I2CCKCNT_LPCC_MASK	0x7f00	/* SCL low period counter */
-
-/* START Hold Time Register ITE_I2CSHDR */
-/* value is counted based on 16 MHz internal clock */
-#define ITE_I2CSHDR_FM	0x0a	/* START condition at fast mode */
-#define	ITE_I2CSHDR_SM	0x47	/* START contition at standard mode */
-
-/* (Repeated) START Setup Time Register ITE_I2CRSUR */
-/* value is counted based on 16 MHz internal clock */
-#define	ITE_I2CRSUR_FM	0x0a	/* repeated START condition at fast mode */
-#define	ITE_I2CRSUR_SM	0x50	/* repeated START condition at standard mode */
-
-/* STOP setup Time Register ITE_I2CPSUR */
-
-/* FIFO Data Register ITE_I2CFDR */
-#define	ITE_I2CFDR_MASK		0xff
-
-/* FIFO Byte Count Register ITE_I2CFBCR */
-#define ITE_I2CFBCR_MASK	0x3f
-
-/* FIFO Control Register ITE_I2CFCR */
-#define	ITE_I2CFCR_FLUSH	0x01	/* Flush FIFO and reset the FIFO point
-					   and I2CFSR */
-/* FIFO Status Register ITE_I2CFSR */
-#define	ITE_I2CFSR_FO	0x01	/* FIFO is overrun when write */
-#define	ITE_I2CFSR_FU	0x02	/* FIFO is underrun when read */
-#define	ITE_I2CFSR_FF	0x04	/* FIFO is full when write */
-#define	ITE_I2CFSR_FE	0x08	/* FIFO is empty when read */
-
-#endif  /* I2C_ITE_H */
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 90f91d039ee2..7c9ab337d180 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -209,18 +209,6 @@ config I2C_ISA
 	tristate
 	depends on I2C
 
-config I2C_ITE
-	tristate "ITE I2C Adapter"
-	depends on I2C && MIPS_ITE8172
-	select I2C_ALGOITE
-	help
-	  This supports the ITE8172 I2C peripheral found on some MIPS
-	  systems. Say Y if you have one of these. You should also say Y for
-	  the ITE I2C driver algorithm support above.
-
-	  This support is also available as a module.  If so, the module 
-	  will be called i2c-ite.
-
 config I2C_IXP4XX
 	tristate "IXP4xx GPIO-Based I2C Interface"
 	depends on I2C && ARCH_IXP4XX
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 493c87289b62..bf5fd078b292 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_I2C_I810)		+= i2c-i810.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
 obj-$(CONFIG_I2C_ISA)		+= i2c-isa.o
-obj-$(CONFIG_I2C_ITE)		+= i2c-ite.o
 obj-$(CONFIG_I2C_IXP2000)	+= i2c-ixp2000.o
 obj-$(CONFIG_I2C_IXP4XX)	+= i2c-ixp4xx.o
 obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
diff --git a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c
deleted file mode 100644
index f7d71869b3b9..000000000000
--- a/drivers/i2c/busses/i2c-ite.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
-   -------------------------------------------------------------------------
-   i2c-adap-ite.c i2c-hw access for the IIC peripheral on the ITE MIPS system
-   -------------------------------------------------------------------------
-   Hai-Pao Fan, MontaVista Software, Inc.
-   hpfan@mvista.com or source@mvista.com
-
-   Copyright 2001 MontaVista Software Inc.
-
-   ----------------------------------------------------------------------------
-   This file was highly leveraged from i2c-elektor.c, which was created
-   by Simon G. Vogl and Hans Berglund:
-
- 
-     Copyright (C) 1995-97 Simon G. Vogl
-                   1998-99 Hans Berglund
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
-   Frodo Looijaard <frodol@dds.nl> */
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-ite.h>
-#include <linux/i2c-adap-ite.h>
-#include "../i2c-ite.h"
-
-#define DEFAULT_BASE  0x14014030
-#define ITE_IIC_IO_SIZE	0x40
-#define DEFAULT_IRQ   0
-#define DEFAULT_CLOCK 0x1b0e	/* default 16MHz/(27+14) = 400KHz */
-#define DEFAULT_OWN   0x55
-
-static int base;
-static int irq;
-static int clock;
-static int own;
-
-static struct iic_ite gpi;
-static wait_queue_head_t iic_wait;
-static int iic_pending;
-static spinlock_t lock;
-
-/* ----- local functions ----------------------------------------------	*/
-
-static void iic_ite_setiic(void *data, int ctl, short val)
-{
-        unsigned long j = jiffies + 10;
-
-	pr_debug(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff);
-#ifdef DEBUG
-	while (time_before(jiffies, j))
-		schedule();
-#endif
-	outw(val,ctl);
-}
-
-static short iic_ite_getiic(void *data, int ctl)
-{
-	short val;
-
-	val = inw(ctl);
-	pr_debug("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff);
-	return (val);
-}
-
-/* Return our slave address.  This is the address
- * put on the I2C bus when another master on the bus wants to address us
- * as a slave
- */
-static int iic_ite_getown(void *data)
-{
-	return (gpi.iic_own);
-}
-
-
-static int iic_ite_getclock(void *data)
-{
-	return (gpi.iic_clock);
-}
-
-
-/* Put this process to sleep.  We will wake up when the
- * IIC controller interrupts.
- */
-static void iic_ite_waitforpin(void) {
-   DEFINE_WAIT(wait);
-   int timeout = 2;
-   unsigned long flags;
-
-   /* If interrupts are enabled (which they are), then put the process to
-    * sleep.  This process will be awakened by two events -- either the
-    * the IIC peripheral interrupts or the timeout expires. 
-    * If interrupts are not enabled then delay for a reasonable amount 
-    * of time and return.
-    */
-   if (gpi.iic_irq > 0) {
-	spin_lock_irqsave(&lock, flags);
-	if (iic_pending == 0) {
-		spin_unlock_irqrestore(&lock, flags);
-		prepare_to_wait(&iic_wait, &wait, TASK_INTERRUPTIBLE);
-		if (schedule_timeout(timeout*HZ)) {
-			spin_lock_irqsave(&lock, flags);
-			if (iic_pending == 1) {
-				iic_pending = 0;
-			}
-			spin_unlock_irqrestore(&lock, flags);
-		}
-		finish_wait(&iic_wait, &wait);
-	} else {
-		iic_pending = 0;
-		spin_unlock_irqrestore(&lock, flags);
-	}
-   } else {
-      udelay(100);
-   }
-}
-
-
-static irqreturn_t iic_ite_handler(int this_irq, void *dev_id)
-{
-	spin_lock(&lock);
-	iic_pending = 1;
-	spin_unlock(&lock);
-
-	wake_up_interruptible(&iic_wait);
-
-	return IRQ_HANDLED;
-}
-
-
-/* Lock the region of memory where I/O registers exist.  Request our
- * interrupt line and register its associated handler.
- */
-static int iic_hw_resrc_init(void)
-{
-	if (!request_region(gpi.iic_base, ITE_IIC_IO_SIZE, "i2c"))
-		return -ENODEV;
-  
-	if (gpi.iic_irq <= 0)
-		return 0;
-
-	if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0)
-		gpi.iic_irq = 0;
-	else
-		enable_irq(gpi.iic_irq);
-
-	return 0;
-}
-
-
-static void iic_ite_release(void)
-{
-	if (gpi.iic_irq > 0) {
-		disable_irq(gpi.iic_irq);
-		free_irq(gpi.iic_irq, 0);
-	}
-	release_region(gpi.iic_base , 2);
-}
-
-/* ------------------------------------------------------------------------
- * Encapsulate the above functions in the correct operations structure.
- * This is only done when more than one hardware adapter is supported.
- */
-static struct i2c_algo_iic_data iic_ite_data = {
-	NULL,
-	iic_ite_setiic,
-	iic_ite_getiic,
-	iic_ite_getown,
-	iic_ite_getclock,
-	iic_ite_waitforpin,
-	80, 80, 100,		/*	waits, timeout */
-};
-
-static struct i2c_adapter iic_ite_ops = {
-	.owner		= THIS_MODULE,
-	.id		= I2C_HW_I_IIC,
-	.algo_data	= &iic_ite_data,
-	.name		= "ITE IIC adapter",
-};
-
-/* Called when the module is loaded.  This function starts the
- * cascade of calls up through the hierarchy of i2c modules (i.e. up to the
- *  algorithm layer and into to the core layer)
- */
-static int __init iic_ite_init(void) 
-{
-
-	struct iic_ite *piic = &gpi;
-
-	printk(KERN_INFO "Initialize ITE IIC adapter module\n");
-	if (base == 0)
-		piic->iic_base = DEFAULT_BASE;
-	else
-		piic->iic_base = base;
-
-	if (irq == 0)
-		piic->iic_irq = DEFAULT_IRQ;
-	else
-		piic->iic_irq = irq;
-
-	if (clock == 0)
-		piic->iic_clock = DEFAULT_CLOCK;
-	else
-		piic->iic_clock = clock;
-
-	if (own == 0)
-		piic->iic_own = DEFAULT_OWN;
-	else
-		piic->iic_own = own;
-
-	iic_ite_data.data = (void *)piic;
-	init_waitqueue_head(&iic_wait);
-	spin_lock_init(&lock);
-	if (iic_hw_resrc_init() == 0) {
-		if (i2c_iic_add_bus(&iic_ite_ops) < 0)
-			return -ENODEV;
-	} else {
-		return -ENODEV;
-	}
-	printk(KERN_INFO " found device at %#x irq %d.\n", 
-		piic->iic_base, piic->iic_irq);
-	return 0;
-}
-
-
-static void iic_ite_exit(void)
-{
-	i2c_iic_del_bus(&iic_ite_ops);
-        iic_ite_release();
-}
-
-/* If modules is NOT defined when this file is compiled, then the MODULE_*
- * macros will resolve to nothing
- */
-MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
-MODULE_DESCRIPTION("I2C-Bus adapter routines for ITE IIC bus adapter");
-MODULE_LICENSE("GPL");
-
-module_param(base, int, 0);
-module_param(irq, int, 0);
-module_param(clock, int, 0);
-module_param(own, int, 0);
-
-
-/* Called when module is loaded or when kernel is initialized.
- * If MODULES is defined when this file is compiled, then this function will
- * resolve to init_module (the function called when insmod is invoked for a
- * module).  Otherwise, this function is called early in the boot, when the
- * kernel is intialized.  Check out /include/init.h to see how this works.
- */
-module_init(iic_ite_init);
-
-/* Resolves to module_cleanup when MODULES is defined. */
-module_exit(iic_ite_exit); 
diff --git a/include/linux/i2c-algo-ite.h b/include/linux/i2c-algo-ite.h
deleted file mode 100644
index 0073fe96c76e..000000000000
--- a/include/linux/i2c-algo-ite.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-ite.h i2c driver algorithms for ITE IIC adapters                 */
-/* ------------------------------------------------------------------------- */
-/*   Copyright (C) 1995-97 Simon G. Vogl
-                   1998-99 Hans Berglund
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.                */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
-   Frodo Looijaard <frodol@dds.nl> */
-
-/* Modifications by MontaVista Software, 2001
-   Changes made to support the ITE IIC peripheral */
-
-
-#ifndef I2C_ALGO_ITE_H
-#define I2C_ALGO_ITE_H 1
-
-#include <linux/types.h>
-
-/* Example of a sequential read request:
-	struct i2c_iic_msg s_msg; 
-
-	s_msg.addr=device_address;
-	s_msg.len=length;
-	s_msg.buf=buffer;
-	s_msg.waddr=word_address;
-	ioctl(file,I2C_SREAD, &s_msg);
- */
-#define I2C_SREAD	0x780	/* SREAD ioctl command */
-
-struct i2c_iic_msg {
-	__u16 addr;	/* device address */
-	__u16 waddr;	/* word address */
-	short len;	/* msg length */
-	char *buf;	/* pointer to msg data */
-};
-
-#ifdef __KERNEL__
-struct i2c_adapter;
-
-struct i2c_algo_iic_data {
-	void *data;		/* private data for lolevel routines	*/
-	void (*setiic) (void *data, int ctl, int val);
-	int  (*getiic) (void *data, int ctl);
-	int  (*getown) (void *data);
-	int  (*getclock) (void *data);
-	void (*waitforpin) (void);     
-
-	/* local settings */
-	int udelay;
-	int mdelay;
-	int timeout;
-};
-
-int i2c_iic_add_bus(struct i2c_adapter *);
-int i2c_iic_del_bus(struct i2c_adapter *);
-#endif /* __KERNEL__ */
-#endif /* I2C_ALGO_ITE_H */
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 36f0c5b0cbf7..00da370bbcd6 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -210,9 +210,6 @@
 /* --- MPC8xx PowerPC adapters						*/
 #define I2C_HW_MPC8XX_EPON	0x110000 /* Eponymous MPC8xx I2C adapter */
 
-/* --- ITE based algorithms						*/
-#define I2C_HW_I_IIC		0x080000 /* controller on the ITE */
-
 /* --- PowerPC on-chip adapters						*/
 #define I2C_HW_OCP		0x120000 /* IBM on-chip I2C adapter */