[netdrvr] trim trailing whitespace: 8139*.c, epic100, forcedeth, tulip/*

16 files changed, 686 insertions, 686 deletions

diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 066e22b01a94..46d8c01437e9 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -19,11 +19,11 @@
 	See the file COPYING in this distribution for more information.
 
 	Contributors:
-	
+
 		Wake-on-LAN support - Felipe Damasio <felipewd@terra.com.br>
 		PCI suspend/resume  - Felipe Damasio <felipewd@terra.com.br>
 		LinkChg interrupt   - Felipe Damasio <felipewd@terra.com.br>
-			
+
 	TODO:
 	* Test Tx checksumming thoroughly
 	* Implement dev->tx_timeout
@@ -461,7 +461,7 @@ static void cp_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 static inline void cp_set_rxbufsize (struct cp_private *cp)
 {
 	unsigned int mtu = cp->dev->mtu;
-	
+
 	if (mtu > ETH_DATA_LEN)
 		/* MTU + ethernet header + FCS + optional VLAN tag */
 		cp->rx_buf_sz = mtu + ETH_HLEN + 8;
@@ -510,7 +510,7 @@ static void cp_rx_err_acct (struct cp_private *cp, unsigned rx_tail,
 static inline unsigned int cp_rx_csum_ok (u32 status)
 {
 	unsigned int protocol = (status >> 16) & 0x3;
-	
+
 	if (likely((protocol == RxProtoTCP) && (!(status & TCPFail))))
 		return 1;
 	else if ((protocol == RxProtoUDP) && (!(status & UDPFail)))
@@ -1061,7 +1061,7 @@ static void cp_init_hw (struct cp_private *cp)
 	cpw8(Config3, PARMEnable);
 	cp->wol_enabled = 0;
 
-	cpw8(Config5, cpr8(Config5) & PMEStatus); 
+	cpw8(Config5, cpr8(Config5) & PMEStatus);
 
 	cpw32_f(HiTxRingAddr, 0);
 	cpw32_f(HiTxRingAddr + 4, 0);
@@ -1351,7 +1351,7 @@ static void netdev_get_wol (struct cp_private *cp,
 		         WAKE_MCAST | WAKE_UCAST;
 	/* We don't need to go on if WOL is disabled */
 	if (!cp->wol_enabled) return;
-	
+
 	options        = cpr8 (Config3);
 	if (options & LinkUp)        wol->wolopts |= WAKE_PHY;
 	if (options & MagicPacket)   wol->wolopts |= WAKE_MAGIC;
@@ -1919,7 +1919,7 @@ static int cp_resume (struct pci_dev *pdev)
 	mii_check_media(&cp->mii_if, netif_msg_link(cp), FALSE);
 
 	spin_unlock_irqrestore (&cp->lock, flags);
-	
+
 	return 0;
 }
 #endif /* CONFIG_PM */
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index feae7832fc84..abd6261465f1 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -165,7 +165,7 @@ static int multicast_filter_limit = 32;
 static int debug = -1;
 
 /*
- * Receive ring size 
+ * Receive ring size
  * Warning: 64K ring has hardware issues and may lock up.
  */
 #if defined(CONFIG_SH_DREAMCAST)
@@ -257,7 +257,7 @@ static struct pci_device_id rtl8139_pci_tbl[] = {
 	{0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
 	{0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
 	{0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
-	{0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 
+	{0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
 
 #ifdef CONFIG_SH_SECUREEDGE5410
 	/* Bogus 8139 silicon reports 8129 without external PROM :-( */
@@ -1824,7 +1824,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 	int tmp_work;
 #endif
 
-	if (netif_msg_rx_err (tp)) 
+	if (netif_msg_rx_err (tp))
 		printk(KERN_DEBUG "%s: Ethernet frame had errors, status %8.8x.\n",
 			dev->name, rx_status);
 	tp->stats.rx_errors++;
@@ -1944,7 +1944,7 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
 		 RTL_R16 (RxBufAddr),
 		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
 
-	while (netif_running(dev) && received < budget 
+	while (netif_running(dev) && received < budget
 	       && (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
 		u32 ring_offset = cur_rx % RX_BUF_LEN;
 		u32 rx_status;
@@ -2031,7 +2031,7 @@ no_early_rx:
 
 			netif_receive_skb (skb);
 		} else {
-			if (net_ratelimit()) 
+			if (net_ratelimit())
 				printk (KERN_WARNING
 					"%s: Memory squeeze, dropping packet.\n",
 					dev->name);
@@ -2158,13 +2158,13 @@ static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance,
 	status = RTL_R16 (IntrStatus);
 
 	/* shared irq? */
-	if (unlikely((status & rtl8139_intr_mask) == 0)) 
+	if (unlikely((status & rtl8139_intr_mask) == 0))
 		goto out;
 
 	handled = 1;
 
 	/* h/w no longer present (hotplug?) or major error, bail */
-	if (unlikely(status == 0xFFFF)) 
+	if (unlikely(status == 0xFFFF))
 		goto out;
 
 	/* close possible race's with dev_close */
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 2f7b86837fe8..8d680ce600d7 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -21,15 +21,15 @@
 	http://www.scyld.com/network/epic100.html
 
 	---------------------------------------------------------------------
-	
+
 	Linux kernel-specific changes:
-	
+
 	LK1.1.2 (jgarzik):
 	* Merge becker version 1.09 (4/08/2000)
 
 	LK1.1.3:
 	* Major bugfix to 1.09 driver (Francis Romieu)
-	
+
 	LK1.1.4 (jgarzik):
 	* Merge becker test version 1.09 (5/29/2000)
 
@@ -66,7 +66,7 @@
 	LK1.1.14 (Kryzsztof Halasa):
 	* fix spurious bad initializations
 	* pound phy a la SMSC's app note on the subject
-	
+
 	AC1.1.14ac
 	* fix power up/down for ethtool that broke in 1.11
 
@@ -244,7 +244,7 @@ static struct pci_device_id epic_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE (pci, epic_pci_tbl);
 
-	
+
 #ifndef USE_IO_OPS
 #undef inb
 #undef inw
@@ -370,7 +370,7 @@ static int epic_close(struct net_device *dev);
 static struct net_device_stats *epic_get_stats(struct net_device *dev);
 static void set_rx_mode(struct net_device *dev);
 
-
+
 
 static int __devinit epic_init_one (struct pci_dev *pdev,
 				    const struct pci_device_id *ent)
@@ -392,9 +392,9 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
 		printk (KERN_INFO "%s" KERN_INFO "%s" KERN_INFO "%s",
 			version, version2, version3);
 #endif
-	
+
 	card_idx++;
-	
+
 	ret = pci_enable_device(pdev);
 	if (ret)
 		goto out;
@@ -405,7 +405,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
 		ret = -ENODEV;
 		goto err_out_disable;
 	}
-	
+
 	pci_set_master(pdev);
 
 	ret = pci_request_regions(pdev, DRV_NAME);
@@ -498,7 +498,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
 	ep->pci_dev = pdev;
 	ep->chip_id = chip_idx;
 	ep->chip_flags = pci_id_tbl[chip_idx].drv_flags;
-	ep->irq_mask = 
+	ep->irq_mask =
 		(ep->chip_flags & TYPE2_INTR ?  PCIBusErr175 : PCIBusErr170)
 		 | CntFull | TxUnderrun | EpicNapiEvent;
 
@@ -587,7 +587,7 @@ err_out_disable:
 	pci_disable_device(pdev);
 	goto out;
 }
-
+
 /* Serial EEPROM section. */
 
 /*  EEPROM_Ctrl bits. */
@@ -709,7 +709,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
 
 	outw(value, ioaddr + MIIData);
 	outl((phy_id << 9) | (loc << 4) | MII_WRITEOP, ioaddr + MIICtrl);
-	for (i = 10000; i > 0; i--) { 
+	for (i = 10000; i > 0; i--) {
 		barrier();
 		if ((inl(ioaddr + MIICtrl) & MII_WRITEOP) == 0)
 			break;
@@ -717,7 +717,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
 	return;
 }
 
-
+
 static int epic_open(struct net_device *dev)
 {
 	struct epic_private *ep = dev->priv;
@@ -760,7 +760,7 @@ static int epic_open(struct net_device *dev)
 #endif
 
 	udelay(20); /* Looks like EPII needs that if you want reliable RX init. FIXME: pci posting bug? */
-	
+
 	for (i = 0; i < 3; i++)
 		outl(cpu_to_le16(((u16*)dev->dev_addr)[i]), ioaddr + LAN0 + i*4);
 
@@ -803,7 +803,7 @@ static int epic_open(struct net_device *dev)
 
 	/* Enable interrupts by setting the interrupt mask. */
 	outl((ep->chip_flags & TYPE2_INTR ? PCIBusErr175 : PCIBusErr170)
-		 | CntFull | TxUnderrun 
+		 | CntFull | TxUnderrun
 		 | RxError | RxHeader | EpicNapiEvent, ioaddr + INTMASK);
 
 	if (debug > 1)
@@ -831,7 +831,7 @@ static void epic_pause(struct net_device *dev)
 	struct epic_private *ep = dev->priv;
 
 	netif_stop_queue (dev);
-	
+
 	/* Disable interrupts by clearing the interrupt mask. */
 	outl(0x00000000, ioaddr + INTMASK);
 	/* Stop the chip's Tx and Rx DMA processes. */
@@ -987,7 +987,7 @@ static void epic_init_ring(struct net_device *dev)
 	for (i = 0; i < RX_RING_SIZE; i++) {
 		ep->rx_ring[i].rxstatus = 0;
 		ep->rx_ring[i].buflength = cpu_to_le32(ep->rx_buf_sz);
-		ep->rx_ring[i].next = ep->rx_ring_dma + 
+		ep->rx_ring[i].next = ep->rx_ring_dma +
 				      (i+1)*sizeof(struct epic_rx_desc);
 		ep->rx_skbuff[i] = NULL;
 	}
@@ -1002,7 +1002,7 @@ static void epic_init_ring(struct net_device *dev)
 			break;
 		skb->dev = dev;			/* Mark as being used by this device. */
 		skb_reserve(skb, 2);	/* 16 byte align the IP header. */
-		ep->rx_ring[i].bufaddr = pci_map_single(ep->pci_dev, 
+		ep->rx_ring[i].bufaddr = pci_map_single(ep->pci_dev,
 			skb->data, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
 		ep->rx_ring[i].rxstatus = cpu_to_le32(DescOwn);
 	}
@@ -1013,7 +1013,7 @@ static void epic_init_ring(struct net_device *dev)
 	for (i = 0; i < TX_RING_SIZE; i++) {
 		ep->tx_skbuff[i] = NULL;
 		ep->tx_ring[i].txstatus = 0x0000;
-		ep->tx_ring[i].next = ep->tx_ring_dma + 
+		ep->tx_ring[i].next = ep->tx_ring_dma +
 			(i+1)*sizeof(struct epic_tx_desc);
 	}
 	ep->tx_ring[i-1].next = ep->tx_ring_dma;
@@ -1026,7 +1026,7 @@ static int epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int entry, free_count;
 	u32 ctrl_word;
 	unsigned long flags;
-	
+
 	if (skb->len < ETH_ZLEN) {
 		skb = skb_padto(skb, ETH_ZLEN);
 		if (skb == NULL)
@@ -1042,7 +1042,7 @@ static int epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	entry = ep->cur_tx % TX_RING_SIZE;
 
 	ep->tx_skbuff[entry] = skb;
-	ep->tx_ring[entry].bufaddr = pci_map_single(ep->pci_dev, skb->data, 
+	ep->tx_ring[entry].bufaddr = pci_map_single(ep->pci_dev, skb->data,
 		 			            skb->len, PCI_DMA_TODEVICE);
 	if (free_count < TX_QUEUE_LEN/2) {/* Typical path */
 		ctrl_word = cpu_to_le32(0x100000); /* No interrupt */
@@ -1126,7 +1126,7 @@ static void epic_tx(struct net_device *dev, struct epic_private *ep)
 
 		/* Free the original skb. */
 		skb = ep->tx_skbuff[entry];
-		pci_unmap_single(ep->pci_dev, ep->tx_ring[entry].bufaddr, 
+		pci_unmap_single(ep->pci_dev, ep->tx_ring[entry].bufaddr,
 				 skb->len, PCI_DMA_TODEVICE);
 		dev_kfree_skb_irq(skb);
 		ep->tx_skbuff[entry] = NULL;
@@ -1281,8 +1281,8 @@ static int epic_rx(struct net_device *dev, int budget)
 							       ep->rx_buf_sz,
 							       PCI_DMA_FROMDEVICE);
 			} else {
-				pci_unmap_single(ep->pci_dev, 
-					ep->rx_ring[entry].bufaddr, 
+				pci_unmap_single(ep->pci_dev,
+					ep->rx_ring[entry].bufaddr,
 					ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
 				skb_put(skb = ep->rx_skbuff[entry], pkt_len);
 				ep->rx_skbuff[entry] = NULL;
@@ -1307,7 +1307,7 @@ static int epic_rx(struct net_device *dev, int budget)
 				break;
 			skb->dev = dev;			/* Mark as being used by this device. */
 			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
-			ep->rx_ring[entry].bufaddr = pci_map_single(ep->pci_dev, 
+			ep->rx_ring[entry].bufaddr = pci_map_single(ep->pci_dev,
 				skb->data, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
 			work_done++;
 		}
@@ -1403,7 +1403,7 @@ static int epic_close(struct net_device *dev)
 		ep->rx_ring[i].rxstatus = 0;		/* Not owned by Epic chip. */
 		ep->rx_ring[i].buflength = 0;
 		if (skb) {
-			pci_unmap_single(ep->pci_dev, ep->rx_ring[i].bufaddr, 
+			pci_unmap_single(ep->pci_dev, ep->rx_ring[i].bufaddr,
 				 	 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
 			dev_kfree_skb(skb);
 		}
@@ -1414,7 +1414,7 @@ static int epic_close(struct net_device *dev)
 		ep->tx_skbuff[i] = NULL;
 		if (!skb)
 			continue;
-		pci_unmap_single(ep->pci_dev, ep->tx_ring[i].bufaddr, 
+		pci_unmap_single(ep->pci_dev, ep->tx_ring[i].bufaddr,
 				 skb->len, PCI_DMA_TODEVICE);
 		dev_kfree_skb(skb);
 	}
@@ -1607,7 +1607,7 @@ static void __devexit epic_remove_one (struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct epic_private *ep = dev->priv;
-	
+
 	pci_free_consistent(pdev, TX_TOTAL_SIZE, ep->tx_ring, ep->tx_ring_dma);
 	pci_free_consistent(pdev, RX_TOTAL_SIZE, ep->rx_ring, ep->rx_ring_dma);
 	unregister_netdev(dev);
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index cee25fe7e19b..66ea5fc5c2e2 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -458,7 +458,7 @@ typedef union _ring_type {
 
 #define RX_RING		128
 #define TX_RING		256
-/* 
+/*
  * If your nic mysteriously hangs then try to reduce the limits
  * to 1/0: It might be required to set NV_TX_LASTPACKET in the
  * last valid ring entry. But this would be impossible to
@@ -480,7 +480,7 @@ typedef union _ring_type {
 #define POLL_WAIT	(1+HZ/100)
 #define LINK_TIMEOUT	(3*HZ)
 
-/* 
+/*
  * desc_ver values:
  * The nic supports three different descriptor types:
  * - DESC_VER_1: Original
@@ -619,7 +619,7 @@ static int max_interrupt_work = 5;
 
 /*
  * Optimization can be either throuput mode or cpu mode
- * 
+ *
  * Throughput Mode: Every tx and rx packet will generate an interrupt.
  * CPU Mode: Interrupts are controlled by a timer.
  */
@@ -1119,7 +1119,7 @@ static void nv_do_rx_refill(unsigned long data)
 	}
 }
 
-static void nv_init_rx(struct net_device *dev) 
+static void nv_init_rx(struct net_device *dev)
 {
 	struct fe_priv *np = netdev_priv(dev);
 	int i;
@@ -1183,7 +1183,7 @@ static void nv_drain_tx(struct net_device *dev)
 {
 	struct fe_priv *np = netdev_priv(dev);
 	unsigned int i;
-	
+
 	for (i = 0; i < TX_RING; i++) {
 		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
 			np->tx_ring.orig[i].FlagLen = 0;
@@ -1329,7 +1329,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	} else {
 		np->tx_ring.ex[start_nr].TxVlan = cpu_to_le32(tx_flags_vlan);
 		np->tx_ring.ex[start_nr].FlagLen |= cpu_to_le32(tx_flags | tx_flags_extra);
-	}	
+	}
 
 	dprintk(KERN_DEBUG "%s: nv_start_xmit: packet %d (entries %d) queued for transmission. tx_flags_extra: %x\n",
 		dev->name, np->next_tx, entries, tx_flags_extra);
@@ -1404,7 +1404,7 @@ static void nv_tx_done(struct net_device *dev)
 				} else {
 					np->stats.tx_packets++;
 					np->stats.tx_bytes += skb->len;
-				}				
+				}
 			}
 		}
 		nv_release_txskb(dev, i);
@@ -1450,7 +1450,7 @@ static void nv_tx_timeout(struct net_device *dev)
 		for (i=0;i<TX_RING;i+= 4) {
 			if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
 				printk(KERN_INFO "%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n",
-				       i, 
+				       i,
 				       le32_to_cpu(np->tx_ring.orig[i].PacketBuffer),
 				       le32_to_cpu(np->tx_ring.orig[i].FlagLen),
 				       le32_to_cpu(np->tx_ring.orig[i+1].PacketBuffer),
@@ -1461,7 +1461,7 @@ static void nv_tx_timeout(struct net_device *dev)
 				       le32_to_cpu(np->tx_ring.orig[i+3].FlagLen));
 			} else {
 				printk(KERN_INFO "%03x: %08x %08x %08x // %08x %08x %08x // %08x %08x %08x // %08x %08x %08x\n",
-				       i, 
+				       i,
 				       le32_to_cpu(np->tx_ring.ex[i].PacketBufferHigh),
 				       le32_to_cpu(np->tx_ring.ex[i].PacketBufferLow),
 				       le32_to_cpu(np->tx_ring.ex[i].FlagLen),
@@ -2067,7 +2067,7 @@ set_speed:
 			if (lpa_pause == LPA_PAUSE_ASYM)
 			{
 				np->pause_flags |= NV_PAUSEFRAME_RX_ENABLE;
-			} 
+			}
 			break;
 		}
 	}
@@ -2086,7 +2086,7 @@ set_speed:
 			writel(regmisc|NVREG_MISC1_PAUSE_TX, base + NvRegMisc1);
 		} else {
 			writel(NVREG_TX_PAUSEFRAME_DISABLE,  base + NvRegTxPauseFrame);
-			writel(regmisc, base + NvRegMisc1);			
+			writel(regmisc, base + NvRegMisc1);
 		}
 	}
 
@@ -2150,7 +2150,7 @@ static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs)
 		spin_lock(&np->lock);
 		nv_tx_done(dev);
 		spin_unlock(&np->lock);
-		
+
 		nv_rx_process(dev);
 		if (nv_alloc_rx(dev)) {
 			spin_lock(&np->lock);
@@ -2158,7 +2158,7 @@ static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs)
 				mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
 			spin_unlock(&np->lock);
 		}
-		
+
 		if (events & NVREG_IRQ_LINK) {
 			spin_lock(&np->lock);
 			nv_link_irq(dev);
@@ -2223,7 +2223,7 @@ static irqreturn_t nv_nic_irq_tx(int foo, void *data, struct pt_regs *regs)
 		spin_lock_irq(&np->lock);
 		nv_tx_done(dev);
 		spin_unlock_irq(&np->lock);
-		
+
 		if (events & (NVREG_IRQ_TX_ERR)) {
 			dprintk(KERN_DEBUG "%s: received irq with events 0x%x. Probably TX fail.\n",
 						dev->name, events);
@@ -2266,7 +2266,7 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs)
 		dprintk(KERN_DEBUG "%s: rx irq: %08x\n", dev->name, events);
 		if (!(events & np->irqmask))
 			break;
-		
+
 		nv_rx_process(dev);
 		if (nv_alloc_rx(dev)) {
 			spin_lock_irq(&np->lock);
@@ -2274,7 +2274,7 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs)
 				mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
 			spin_unlock_irq(&np->lock);
 		}
-		
+
 		if (i > max_interrupt_work) {
 			spin_lock_irq(&np->lock);
 			/* disable interrupts on the nic */
@@ -2313,7 +2313,7 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs)
 		dprintk(KERN_DEBUG "%s: irq: %08x\n", dev->name, events);
 		if (!(events & np->irqmask))
 			break;
-		
+
 		if (events & NVREG_IRQ_LINK) {
 			spin_lock_irq(&np->lock);
 			nv_link_irq(dev);
@@ -2386,7 +2386,7 @@ static void nv_do_nic_poll(unsigned long data)
 	np->nic_poll_irq = 0;
 
 	/* FIXME: Do we need synchronize_irq(dev->irq) here? */
-	
+
 	writel(mask, base + NvRegIrqMask);
 	pci_push(base);
 
@@ -3165,7 +3165,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	if (id->driver_data & DEV_HAS_PAUSEFRAME_TX) {
 		np->pause_flags |= NV_PAUSEFRAME_TX_CAPABLE;
 	}
-	
+
 
 	err = -ENOMEM;
 	np->base = ioremap(addr, np->register_size);
@@ -3313,7 +3313,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		       pci_name(pci_dev));
 		goto out_freering;
 	}
-	
+
 	/* reset it */
 	phy_init(dev);
 
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index e3dd144d326b..5f743b972949 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -227,12 +227,12 @@ enum {
 	SROMC0InfoLeaf		= 27,
 	MediaBlockMask		= 0x3f,
 	MediaCustomCSRs		= (1 << 6),
-	
+
 	/* PCIPM bits */
 	PM_Sleep		= (1 << 31),
 	PM_Snooze		= (1 << 30),
 	PM_Mask			= PM_Sleep | PM_Snooze,
-	
+
 	/* SIAStatus bits */
 	NWayState		= (1 << 14) | (1 << 13) | (1 << 12),
 	NWayRestart		= (1 << 12),
@@ -858,7 +858,7 @@ static void de_stop_rxtx (struct de_private *de)
 			return;
 		cpu_relax();
 	}
-	
+
 	printk(KERN_WARNING "%s: timeout expired stopping DMA\n", de->dev->name);
 }
 
@@ -931,7 +931,7 @@ static void de_set_media (struct de_private *de)
 		macmode |= FullDuplex;
 	else
 		macmode &= ~FullDuplex;
-	
+
 	if (netif_msg_link(de)) {
 		printk(KERN_INFO "%s: set link %s\n"
 		       KERN_INFO "%s:    mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
@@ -966,9 +966,9 @@ static void de21040_media_timer (unsigned long data)
 	u32 status = dr32(SIAStatus);
 	unsigned int carrier;
 	unsigned long flags;
-	
+
 	carrier = (status & NetCxnErr) ? 0 : 1;
-		
+
 	if (carrier) {
 		if (de->media_type != DE_MEDIA_AUI && (status & LinkFailStatus))
 			goto no_link_yet;
@@ -985,7 +985,7 @@ static void de21040_media_timer (unsigned long data)
 		return;
 	}
 
-	de_link_down(de);	
+	de_link_down(de);
 
 	if (de->media_lock)
 		return;
@@ -1039,7 +1039,7 @@ static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media)
 			return 0;
 		break;
 	}
-	
+
 	return 1;
 }
 
@@ -1050,9 +1050,9 @@ static void de21041_media_timer (unsigned long data)
 	u32 status = dr32(SIAStatus);
 	unsigned int carrier;
 	unsigned long flags;
-	
+
 	carrier = (status & NetCxnErr) ? 0 : 1;
-		
+
 	if (carrier) {
 		if ((de->media_type == DE_MEDIA_TP_AUTO ||
 		     de->media_type == DE_MEDIA_TP ||
@@ -1072,7 +1072,7 @@ static void de21041_media_timer (unsigned long data)
 		return;
 	}
 
-	de_link_down(de);	
+	de_link_down(de);
 
 	/* if media type locked, don't switch media */
 	if (de->media_lock)
@@ -1124,7 +1124,7 @@ static void de21041_media_timer (unsigned long data)
 		u32 next_states[] = { DE_MEDIA_AUI, DE_MEDIA_BNC, DE_MEDIA_TP_AUTO };
 		de_next_media(de, next_states, ARRAY_SIZE(next_states));
 	}
-	
+
 set_media:
 	spin_lock_irqsave(&de->lock, flags);
 	de_stop_rxtx(de);
@@ -1148,7 +1148,7 @@ static void de_media_interrupt (struct de_private *de, u32 status)
 		mod_timer(&de->media_timer, jiffies + DE_TIMER_LINK);
 		return;
 	}
-	
+
 	BUG_ON(!(status & LinkFail));
 
 	if (netif_carrier_ok(de->dev)) {
@@ -1227,7 +1227,7 @@ static int de_init_hw (struct de_private *de)
 	int rc;
 
 	de_adapter_wake(de);
-	
+
 	macmode = dr32(MacMode) & ~MacModeClear;
 
 	rc = de_reset_mac(de);
@@ -1413,7 +1413,7 @@ static int de_close (struct net_device *dev)
 	netif_stop_queue(dev);
 	netif_carrier_off(dev);
 	spin_unlock_irqrestore(&de->lock, flags);
-	
+
 	free_irq(dev->irq, dev);
 
 	de_free_rings(de);
@@ -1441,7 +1441,7 @@ static void de_tx_timeout (struct net_device *dev)
 
 	spin_unlock_irq(&de->lock);
 	enable_irq(dev->irq);
-		
+
 	/* Update the error counts. */
 	__de_get_stats(de);
 
@@ -1451,7 +1451,7 @@ static void de_tx_timeout (struct net_device *dev)
 	de_init_rings(de);
 
 	de_init_hw(de);
-	
+
 	netif_wake_queue(dev);
 }
 
@@ -1459,7 +1459,7 @@ static void __de_get_regs(struct de_private *de, u8 *buf)
 {
 	int i;
 	u32 *rbuf = (u32 *)buf;
-	
+
 	/* read all CSRs */
 	for (i = 0; i < DE_NUM_REGS; i++)
 		rbuf[i] = dr32(i * 8);
@@ -1474,7 +1474,7 @@ static int __de_get_settings(struct de_private *de, struct ethtool_cmd *ecmd)
 	ecmd->transceiver = XCVR_INTERNAL;
 	ecmd->phy_address = 0;
 	ecmd->advertising = de->media_advertise;
-	
+
 	switch (de->media_type) {
 	case DE_MEDIA_AUI:
 		ecmd->port = PORT_AUI;
@@ -1489,7 +1489,7 @@ static int __de_get_settings(struct de_private *de, struct ethtool_cmd *ecmd)
 		ecmd->speed = SPEED_10;
 		break;
 	}
-	
+
 	if (dr32(MacMode) & FullDuplex)
 		ecmd->duplex = DUPLEX_FULL;
 	else
@@ -1529,7 +1529,7 @@ static int __de_set_settings(struct de_private *de, struct ethtool_cmd *ecmd)
 	if (ecmd->autoneg == AUTONEG_ENABLE &&
 	    (!(ecmd->advertising & ADVERTISED_Autoneg)))
 		return -EINVAL;
-	
+
 	switch (ecmd->port) {
 	case PORT_AUI:
 		new_media = DE_MEDIA_AUI;
@@ -1554,22 +1554,22 @@ static int __de_set_settings(struct de_private *de, struct ethtool_cmd *ecmd)
 			return -EINVAL;
 		break;
 	}
-	
+
 	media_lock = (ecmd->autoneg == AUTONEG_ENABLE) ? 0 : 1;
-	
+
 	if ((new_media == de->media_type) &&
 	    (media_lock == de->media_lock) &&
 	    (ecmd->advertising == de->media_advertise))
 		return 0; /* nothing to change */
-	    
+
 	de_link_down(de);
 	de_stop_rxtx(de);
-	
+
 	de->media_type = new_media;
 	de->media_lock = media_lock;
 	de->media_advertise = ecmd->advertising;
 	de_set_media(de);
-	
+
 	return 0;
 }
 
@@ -1817,7 +1817,7 @@ static void __init de21041_get_srom_info (struct de_private *de)
 	case 0x0204:  de->media_type = DE_MEDIA_TP_FD; break;
 	default: de->media_type = DE_MEDIA_TP_AUTO; break;
 	}
-	
+
 	if (netif_msg_probe(de))
 		printk(KERN_INFO "de%d: SROM leaf offset %u, default media %s\n",
 		       de->board_idx, ofs,
@@ -1886,7 +1886,7 @@ static void __init de21041_get_srom_info (struct de_private *de)
 				       de->media[idx].csr13,
 				       de->media[idx].csr14,
 				       de->media[idx].csr15);
-				       
+
 		} else if (netif_msg_probe(de))
 			printk("\n");
 
@@ -2118,7 +2118,7 @@ static int de_suspend (struct pci_dev *pdev, pm_message_t state)
 
 		spin_unlock_irq(&de->lock);
 		enable_irq(dev->irq);
-		
+
 		/* Update the error counts. */
 		__de_get_stats(de);
 
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index f56094102042..da8bd0d62a3f 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -41,11 +41,11 @@
     Digital Semiconductor   SROM   Specification.    The  driver   currently
     recognises the following chips:
 
-        DC21040  (no SROM) 
-	DC21041[A]  
-	DC21140[A] 
-	DC21142 
-	DC21143 
+        DC21040  (no SROM)
+	DC21041[A]
+	DC21140[A]
+	DC21142
+	DC21143
 
     So far the driver is known to work with the following cards:
 
@@ -55,7 +55,7 @@
 	SMC8432
 	SMC9332 (w/new SROM)
 	ZNYX31[45]
-	ZNYX346 10/100 4 port (can act as a 10/100 bridge!) 
+	ZNYX346 10/100 4 port (can act as a 10/100 bridge!)
 
     The driver has been tested on a relatively busy network using the DE425,
     DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred
@@ -106,7 +106,7 @@
     loading by:
 
                    insmod de4x5 io=0xghh           where g = bus number
-		                                        hh = device number   
+		                                        hh = device number
 
        NB: autoprobing for modules is now supported by default. You may just
            use:
@@ -120,11 +120,11 @@
     4) if you are wanting to add a new  card, goto 5. Otherwise, recompile a
     kernel with the de4x5 configuration turned off and reboot.
     5) insmod de4x5 [io=0xghh]
-    6) run the net startup bits for your new eth?? interface(s) manually 
-    (usually /etc/rc.inet[12] at boot time). 
+    6) run the net startup bits for your new eth?? interface(s) manually
+    (usually /etc/rc.inet[12] at boot time).
     7) enjoy!
 
-    To unload a module, turn off the associated interface(s) 
+    To unload a module, turn off the associated interface(s)
     'ifconfig eth?? down' then 'rmmod de4x5'.
 
     Automedia detection is included so that in  principal you can disconnect
@@ -135,7 +135,7 @@
     By  default,  the driver will  now   autodetect any  DECchip based card.
     Should you have a need to restrict the driver to DIGITAL only cards, you
     can compile with a  DEC_ONLY define, or if  loading as a module, use the
-    'dec_only=1'  parameter. 
+    'dec_only=1'  parameter.
 
     I've changed the timing routines to  use the kernel timer and scheduling
     functions  so that the  hangs  and other assorted problems that occurred
@@ -204,7 +204,7 @@
     following parameters are allowed:
 
             fdx        for full duplex
-	    autosense  to set the media/speed; with the following 
+	    autosense  to set the media/speed; with the following
 	               sub-parameters:
 		       TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO
 
@@ -235,14 +235,14 @@
     this  automatically  or include  #define DE4X5_FORCE_EISA  on or  before
     line 1040 in the driver.
 
-    TO DO: 
+    TO DO:
     ------
 
     Revision History
     ----------------
 
     Version   Date        Description
-  
+
       0.1     17-Nov-94   Initial writing. ALPHA code release.
       0.2     13-Jan-95   Added PCI support for DE435's.
       0.21    19-Jan-95   Added auto media detection.
@@ -251,7 +251,7 @@
 			  Add request/release_region code.
 			  Add loadable modules support for PCI.
 			  Clean up loadable modules support.
-      0.23    28-Feb-95   Added DC21041 and DC21140 support. 
+      0.23    28-Feb-95   Added DC21041 and DC21140 support.
                           Fix missed frame counter value and initialisation.
 			  Fixed EISA probe.
       0.24    11-Apr-95   Change delay routine to use <linux/udelay>.
@@ -280,7 +280,7 @@
                           Add kernel timer code (h/w is too flaky).
 			  Add MII based PHY autosense.
 			  Add new multicasting code.
-			  Add new autosense algorithms for media/mode 
+			  Add new autosense algorithms for media/mode
 			  selection using kernel scheduling/timing.
 			  Re-formatted.
 			  Made changes suggested by <jeff@router.patch.net>:
@@ -307,10 +307,10 @@
                           Add Accton to the list of broken cards.
 			  Fix TX under-run bug for non DC21140 chips.
 			  Fix boot command probe bug in alloc_device() as
-			   reported by <koen.gadeyne@barco.com> and 
+			   reported by <koen.gadeyne@barco.com> and
 			   <orava@nether.tky.hut.fi>.
 			  Add cache locks to prevent a race condition as
-			   reported by <csd@microplex.com> and 
+			   reported by <csd@microplex.com> and
 			   <baba@beckman.uiuc.edu>.
 			  Upgraded alloc_device() code.
       0.431  28-Jun-96    Fix potential bug in queue_pkt() from discussion
@@ -322,7 +322,7 @@
                            with a loopback packet.
       0.442   9-Sep-96    Include AUI in dc21041 media printout. Bug reported
                            by <bhat@mundook.cs.mu.OZ.AU>
-      0.45    8-Dec-96    Include endian functions for PPC use, from work 
+      0.45    8-Dec-96    Include endian functions for PPC use, from work
                            by <cort@cs.nmt.edu> and <g.thomas@opengroup.org>.
       0.451  28-Dec-96    Added fix to allow autoprobe for modules after
                            suggestion from <mjacob@feral.com>.
@@ -346,14 +346,14 @@
 			   <paubert@iram.es>.
       0.52   26-Apr-97    Some changes may not credit the right people -
                            a disk crash meant I lost some mail.
-			  Change RX interrupt routine to drop rather than 
-			   defer packets to avoid hang reported by 
+			  Change RX interrupt routine to drop rather than
+			   defer packets to avoid hang reported by
 			   <g.thomas@opengroup.org>.
 			  Fix srom_exec() to return for COMPACT and type 1
 			   infoblocks.
 			  Added DC21142 and DC21143 functions.
 			  Added byte counters from <phil@tazenda.demon.co.uk>
-			  Added SA_INTERRUPT temporary fix from 
+			  Added SA_INTERRUPT temporary fix from
 			   <mjacob@feral.com>.
       0.53   12-Nov-97    Fix the *_probe() to include 'eth??' name during
                            module load: bug reported by
@@ -363,10 +363,10 @@
 			  Make above search independent of BIOS device scan
 			   direction.
 			  Completed DC2114[23] autosense functions.
-      0.531  21-Dec-97    Fix DE500-XA 100Mb/s bug reported by 
+      0.531  21-Dec-97    Fix DE500-XA 100Mb/s bug reported by
                            <robin@intercore.com
 			  Fix type1_infoblock() bug introduced in 0.53, from
-			   problem reports by 
+			   problem reports by
 			   <parmee@postecss.ncrfran.france.ncr.com> and
 			   <jo@ice.dillingen.baynet.de>.
 			  Added argument list to set up each board from either
@@ -374,7 +374,7 @@
 			  Added generic MII PHY functionality to deal with
 			   newer PHY chips.
 			  Fix the mess in 2.1.67.
-      0.532   5-Jan-98    Fix bug in mii_get_phy() reported by 
+      0.532   5-Jan-98    Fix bug in mii_get_phy() reported by
                            <redhat@cococo.net>.
                           Fix bug in pci_probe() for 64 bit systems reported
 			   by <belliott@accessone.com>.
@@ -398,7 +398,7 @@
 			   version. I hope nothing is broken...
           		  Add TX done interrupt modification from suggestion
 			   by <Austin.Donnelly@cl.cam.ac.uk>.
-			  Fix is_anc_capable() bug reported by 
+			  Fix is_anc_capable() bug reported by
 			   <Austin.Donnelly@cl.cam.ac.uk>.
 			  Fix type[13]_infoblock() bug: during MII search, PHY
 			   lp->rst not run because lp->ibn not initialised -
@@ -413,7 +413,7 @@
 			  Add an_exception() for old ZYNX346 and fix compile
 			   warning on PPC & SPARC, from <ecd@skynet.be>.
 			  Fix lastPCI to correctly work with compiled in
-			   kernels and modules from bug report by 
+			   kernels and modules from bug report by
 			   <Zlatko.Calusic@CARNet.hr> et al.
       0.542  15-Sep-98    Fix dc2114x_autoconf() to stop multiple messages
                            when media is unconnected.
@@ -425,7 +425,7 @@
       0.544   8-May-99    Fix for buggy SROM in Motorola embedded boards using
                            a 21143 by <mmporter@home.com>.
 			  Change PCI/EISA bus probing order.
-      0.545  28-Nov-99    Further Moto SROM bug fix from 
+      0.545  28-Nov-99    Further Moto SROM bug fix from
                            <mporter@eng.mcd.mot.com>
                           Remove double checking for DEBUG_RX in de4x5_dbg_rx()
 			   from report by <geert@linux-m68k.org>
@@ -434,8 +434,8 @@
                            variable 'pb', on a non de4x5 PCI device, in this
                            case a PCI bridge (DEC chip 21152). The value of
                            'pb' is now only initialized if a de4x5 chip is
-                           present. 
-                           <france@handhelds.org>  
+                           present.
+                           <france@handhelds.org>
       0.547  08-Nov-01    Use library crc32 functions by <Matt_Domsch@dell.com>
       0.548  30-Aug-03    Big 2.6 cleanup. Ported to PCI/EISA probing and
                            generic DMA APIs. Fixed DE425 support on Alpha.
@@ -584,7 +584,7 @@ static int de4x5_debug = (DEBUG_MEDIA | DEBUG_VERSION);
 
 /*
 ** Allow per adapter set up. For modules this is simply a command line
-** parameter, e.g.: 
+** parameter, e.g.:
 ** insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
 **
 ** For a compiled in driver, place e.g.
@@ -655,7 +655,7 @@ static c_char *de4x5_signatures[] = DE4X5_SIGNATURE;
 ** Memory Alignment. Each descriptor is 4 longwords long. To force a
 ** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and
 ** DESC_ALIGN. ALIGN aligns the start address of the private memory area
-** and hence the RX descriptor ring's first entry. 
+** and hence the RX descriptor ring's first entry.
 */
 #define DE4X5_ALIGN4      ((u_long)4 - 1)     /* 1 longword align */
 #define DE4X5_ALIGN8      ((u_long)8 - 1)     /* 2 longword align */
@@ -1081,8 +1081,8 @@ static int (*dc_infoblock[])(struct net_device *dev, u_char, u_char *) = {
     mdelay(2);                           /* Wait for 2ms */\
 }
 
-
-static int __devinit 
+
+static int __devinit
 de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
 {
     char name[DE4X5_NAME_LENGTH + 1];
@@ -1102,12 +1102,12 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
     mdelay(10);
 
     RESET_DE4X5;
-    
+
     if ((inl(DE4X5_STS) & (STS_TS | STS_RS)) != 0) {
 	return -ENXIO;                       /* Hardware could not reset */
     }
-    
-    /* 
+
+    /*
     ** Now find out what kind of DC21040/DC21041/DC21140 board we have.
     */
     lp->useSROM = FALSE;
@@ -1116,21 +1116,21 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
     } else {
 	EISA_signature(name, gendev);
     }
-    
+
     if (*name == '\0') {                     /* Not found a board signature */
 	return -ENXIO;
     }
-    
+
     dev->base_addr = iobase;
     printk ("%s: %s at 0x%04lx", gendev->bus_id, name, iobase);
-    
+
     printk(", h/w address ");
     status = get_hw_addr(dev);
     for (i = 0; i < ETH_ALEN - 1; i++) {     /* get the ethernet addr. */
 	printk("%2.2x:", dev->dev_addr[i]);
     }
     printk("%2.2x,\n", dev->dev_addr[i]);
-    
+
     if (status != 0) {
 	printk("      which has an Ethernet PROM CRC error.\n");
 	return -ENXIO;
@@ -1171,10 +1171,10 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
 	}
 
 	lp->tx_ring = lp->rx_ring + NUM_RX_DESC;
-	    
+
 	/*
 	** Set up the RX descriptor ring (Intels)
-	** Allocate contiguous receive buffers, long word aligned (Alphas) 
+	** Allocate contiguous receive buffers, long word aligned (Alphas)
 	*/
 #if !defined(__alpha__) && !defined(__powerpc__) && !defined(__sparc_v9__) && !defined(DE4X5_DO_MEMCPY)
 	for (i=0; i<NUM_RX_DESC; i++) {
@@ -1210,7 +1210,7 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
 
 	lp->rxRingSize = NUM_RX_DESC;
 	lp->txRingSize = NUM_TX_DESC;
-	    
+
 	/* Write the end of list marker to the descriptor lists */
 	lp->rx_ring[lp->rxRingSize - 1].des1 |= cpu_to_le32(RD_RER);
 	lp->tx_ring[lp->txRingSize - 1].des1 |= cpu_to_le32(TD_TER);
@@ -1219,7 +1219,7 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
 	outl(lp->dma_rings, DE4X5_RRBA);
 	outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
 	     DE4X5_TRBA);
-	    
+
 	/* Initialise the IRQ mask and Enable/Disable */
 	lp->irq_mask = IMR_RIM | IMR_TIM | IMR_TUM | IMR_UNM;
 	lp->irq_en   = IMR_NIM | IMR_AIM;
@@ -1252,7 +1252,7 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
 	if ((lp->chipset != DC21040) && (lp->chipset != DC21041)) {
 	    mii_get_phy(dev);
 	}
-	
+
 #ifndef __sparc_v9__
 	printk("      and requires IRQ%d (provided by %s).\n", dev->irq,
 #else
@@ -1260,11 +1260,11 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
 #endif
 	       ((lp->bus == PCI) ? "PCI BIOS" : "EISA CNFG"));
     }
-    
+
     if (de4x5_debug & DEBUG_VERSION) {
 	printk(version);
     }
-    
+
     /* The DE4X5-specific entries in the device structure. */
     SET_MODULE_OWNER(dev);
     SET_NETDEV_DEV(dev, gendev);
@@ -1274,23 +1274,23 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
     dev->get_stats = &de4x5_get_stats;
     dev->set_multicast_list = &set_multicast_list;
     dev->do_ioctl = &de4x5_ioctl;
-    
+
     dev->mem_start = 0;
-    
+
     /* Fill in the generic fields of the device structure. */
     if ((status = register_netdev (dev))) {
 	    dma_free_coherent (gendev, lp->dma_size,
 			       lp->rx_ring, lp->dma_rings);
 	    return status;
     }
-    
+
     /* Let the adapter sleep to save power */
     yawn(dev, SLEEP);
-    
+
     return status;
 }
 
-
+
 static int
 de4x5_open(struct net_device *dev)
 {
@@ -1312,15 +1312,15 @@ de4x5_open(struct net_device *dev)
     */
     yawn(dev, WAKEUP);
 
-    /* 
-    ** Re-initialize the DE4X5... 
+    /*
+    ** Re-initialize the DE4X5...
     */
     status = de4x5_init(dev);
     spin_lock_init(&lp->lock);
     lp->state = OPEN;
     de4x5_dbg_open(dev);
-    
-    if (request_irq(dev->irq, (void *)de4x5_interrupt, SA_SHIRQ, 
+
+    if (request_irq(dev->irq, (void *)de4x5_interrupt, SA_SHIRQ,
 		                                     lp->adapter_name, dev)) {
 	printk("de4x5_open(): Requested IRQ%d is busy - attemping FAST/SHARE...", dev->irq);
 	if (request_irq(dev->irq, de4x5_interrupt, SA_INTERRUPT | SA_SHIRQ,
@@ -1340,11 +1340,11 @@ de4x5_open(struct net_device *dev)
 
     lp->interrupt = UNMASK_INTERRUPTS;
     dev->trans_start = jiffies;
-    
+
     START_DE4X5;
-	
+
     de4x5_setup_intr(dev);
-    
+
     if (de4x5_debug & DEBUG_OPEN) {
 	printk("\tsts:  0x%08x\n", inl(DE4X5_STS));
 	printk("\tbmr:  0x%08x\n", inl(DE4X5_BMR));
@@ -1355,7 +1355,7 @@ de4x5_open(struct net_device *dev)
 	printk("\tstrr: 0x%08x\n", inl(DE4X5_STRR));
 	printk("\tsigr: 0x%08x\n", inl(DE4X5_SIGR));
     }
-    
+
     return status;
 }
 
@@ -1369,15 +1369,15 @@ de4x5_open(struct net_device *dev)
 */
 static int
 de4x5_init(struct net_device *dev)
-{  
+{
     /* Lock out other processes whilst setting up the hardware */
     netif_stop_queue(dev);
-    
+
     de4x5_sw_reset(dev);
-    
+
     /* Autoconfigure the connected port */
     autoconf_media(dev);
-    
+
     return 0;
 }
 
@@ -1388,7 +1388,7 @@ de4x5_sw_reset(struct net_device *dev)
     u_long iobase = dev->base_addr;
     int i, j, status = 0;
     s32 bmr, omr;
-    
+
     /* Select the MII or SRL port now and RESET the MAC */
     if (!lp->useSROM) {
 	if (lp->phy[lp->active].id != 0) {
@@ -1399,7 +1399,7 @@ de4x5_sw_reset(struct net_device *dev)
 	de4x5_switch_mac_port(dev);
     }
 
-    /* 
+    /*
     ** Set the programmable burst length to 8 longwords for all the DC21140
     ** Fasternet chips and 4 longwords for all others: DMA errors result
     ** without these values. Cache align 16 long.
@@ -1416,23 +1416,23 @@ de4x5_sw_reset(struct net_device *dev)
     outl(lp->dma_rings, DE4X5_RRBA);
     outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
 	 DE4X5_TRBA);
-    
+
     lp->rx_new = lp->rx_old = 0;
     lp->tx_new = lp->tx_old = 0;
-    
+
     for (i = 0; i < lp->rxRingSize; i++) {
 	lp->rx_ring[i].status = cpu_to_le32(R_OWN);
     }
-    
+
     for (i = 0; i < lp->txRingSize; i++) {
 	lp->tx_ring[i].status = cpu_to_le32(0);
     }
-    
+
     barrier();
 
     /* Build the setup frame depending on filtering mode */
     SetMulticastFilter(dev);
-    
+
     load_packet(dev, lp->setup_frame, PERFECT_F|TD_SET|SETUP_FRAME_LEN, (struct sk_buff *)1);
     outl(omr|OMR_ST, DE4X5_OMR);
 
@@ -1445,18 +1445,18 @@ de4x5_sw_reset(struct net_device *dev)
     outl(omr, DE4X5_OMR);                        /* Stop everything! */
 
     if (j == 0) {
-	printk("%s: Setup frame timed out, status %08x\n", dev->name, 
+	printk("%s: Setup frame timed out, status %08x\n", dev->name,
 	       inl(DE4X5_STS));
 	status = -EIO;
     }
-    
+
     lp->tx_new = (++lp->tx_new) % lp->txRingSize;
     lp->tx_old = lp->tx_new;
 
     return status;
 }
 
-/* 
+/*
 ** Writes a socket buffer address to the next available transmit descriptor.
 */
 static int
@@ -1469,9 +1469,9 @@ de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
 
     netif_stop_queue(dev);
     if (lp->tx_enable == NO) {                   /* Cannot send for now */
-	return -1;                                
+	return -1;
     }
-    
+
     /*
     ** Clean out the TX ring asynchronously to interrupts - sometimes the
     ** interrupts are lost by delayed descriptor status updates relative to
@@ -1482,7 +1482,7 @@ de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
     spin_unlock_irqrestore(&lp->lock, flags);
 
     /* Test if cache is already locked - requeue skb if so */
-    if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt) 
+    if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt)
 	return -1;
 
     /* Transmit descriptor ring full or stale skb */
@@ -1509,10 +1509,10 @@ de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
 	    load_packet(dev, skb->data, TD_IC | TD_LS | TD_FS | skb->len, skb);
  	    lp->stats.tx_bytes += skb->len;
 	    outl(POLL_DEMAND, DE4X5_TPD);/* Start the TX */
-		
+
 	    lp->tx_new = (++lp->tx_new) % lp->txRingSize;
 	    dev->trans_start = jiffies;
-		    
+
 	    if (TX_BUFFS_AVAIL) {
 		netif_start_queue(dev);         /* Another pkt may be queued */
 	    }
@@ -1521,15 +1521,15 @@ de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
 	}
 	if (skb) de4x5_putb_cache(dev, skb);
     }
-    
+
     lp->cache.lock = 0;
 
     return status;
 }
 
 /*
-** The DE4X5 interrupt handler. 
-** 
+** The DE4X5 interrupt handler.
+**
 ** I/O Read/Writes through intermediate PCI bridges are never 'posted',
 ** so that the asserted interrupt always has some real data to work with -
 ** if these I/O accesses are ever changed to memory accesses, ensure the
@@ -1546,7 +1546,7 @@ de4x5_interrupt(int irq, void *dev_id, struct pt_regs *regs)
     s32 imr, omr, sts, limit;
     u_long iobase;
     unsigned int handled = 0;
-    
+
     if (dev == NULL) {
 	printk ("de4x5_interrupt(): irq %d for unknown device.\n", irq);
 	return IRQ_NONE;
@@ -1554,35 +1554,35 @@ de4x5_interrupt(int irq, void *dev_id, struct pt_regs *regs)
     lp = netdev_priv(dev);
     spin_lock(&lp->lock);
     iobase = dev->base_addr;
-	
+
     DISABLE_IRQs;                        /* Ensure non re-entrancy */
 
     if (test_and_set_bit(MASK_INTERRUPTS, (void*) &lp->interrupt))
 	printk("%s: Re-entering the interrupt handler.\n", dev->name);
 
     synchronize_irq(dev->irq);
-	
+
     for (limit=0; limit<8; limit++) {
 	sts = inl(DE4X5_STS);            /* Read IRQ status */
 	outl(sts, DE4X5_STS);            /* Reset the board interrupts */
-	    
+
 	if (!(sts & lp->irq_mask)) break;/* All done */
 	handled = 1;
-	    
+
 	if (sts & (STS_RI | STS_RU))     /* Rx interrupt (packet[s] arrived) */
 	  de4x5_rx(dev);
-	    
+
 	if (sts & (STS_TI | STS_TU))     /* Tx interrupt (packet sent) */
-	  de4x5_tx(dev); 
-	    
+	  de4x5_tx(dev);
+
 	if (sts & STS_LNF) {             /* TP Link has failed */
 	    lp->irq_mask &= ~IMR_LFM;
 	}
-	    
+
 	if (sts & STS_UNF) {             /* Transmit underrun */
 	    de4x5_txur(dev);
 	}
-	    
+
 	if (sts & STS_SE) {              /* Bus Error */
 	    STOP_DE4X5;
 	    printk("%s: Fatal bus error occurred, sts=%#8x, device stopped.\n",
@@ -1603,7 +1603,7 @@ de4x5_interrupt(int irq, void *dev_id, struct pt_regs *regs)
     lp->interrupt = UNMASK_INTERRUPTS;
     ENABLE_IRQs;
     spin_unlock(&lp->lock);
-    
+
     return IRQ_RETVAL(handled);
 }
 
@@ -1614,11 +1614,11 @@ de4x5_rx(struct net_device *dev)
     u_long iobase = dev->base_addr;
     int entry;
     s32 status;
-    
+
     for (entry=lp->rx_new; (s32)le32_to_cpu(lp->rx_ring[entry].status)>=0;
 	                                                    entry=lp->rx_new) {
 	status = (s32)le32_to_cpu(lp->rx_ring[entry].status);
-	
+
 	if (lp->rx_ovf) {
 	    if (inl(DE4X5_MFC) & MFC_FOCM) {
 		de4x5_rx_ovfc(dev);
@@ -1629,7 +1629,7 @@ de4x5_rx(struct net_device *dev)
 	if (status & RD_FS) {                 /* Remember the start of frame */
 	    lp->rx_old = entry;
 	}
-	
+
 	if (status & RD_LS) {                 /* Valid frame status */
 	    if (lp->tx_enable) lp->linkOK++;
 	    if (status & RD_ES) {	      /* There was an error. */
@@ -1646,9 +1646,9 @@ de4x5_rx(struct net_device *dev)
 		struct sk_buff *skb;
 		short pkt_len = (short)(le32_to_cpu(lp->rx_ring[entry].status)
 					                            >> 16) - 4;
-		
+
 		if ((skb = de4x5_alloc_rx_buff(dev, entry, pkt_len)) == NULL) {
-		    printk("%s: Insufficient memory; nuking packet.\n", 
+		    printk("%s: Insufficient memory; nuking packet.\n",
 			                                            dev->name);
 		    lp->stats.rx_dropped++;
 		} else {
@@ -1658,14 +1658,14 @@ de4x5_rx(struct net_device *dev)
 		    skb->protocol=eth_type_trans(skb,dev);
 		    de4x5_local_stats(dev, skb->data, pkt_len);
 		    netif_rx(skb);
-		    
+
 		    /* Update stats */
 		    dev->last_rx = jiffies;
 		    lp->stats.rx_packets++;
  		    lp->stats.rx_bytes += pkt_len;
 		}
 	    }
-	    
+
 	    /* Change buffer ownership for this frame, back to the adapter */
 	    for (;lp->rx_old!=entry;lp->rx_old=(++lp->rx_old)%lp->rxRingSize) {
 		lp->rx_ring[lp->rx_old].status = cpu_to_le32(R_OWN);
@@ -1674,13 +1674,13 @@ de4x5_rx(struct net_device *dev)
 	    lp->rx_ring[entry].status = cpu_to_le32(R_OWN);
 	    barrier();
 	}
-	
+
 	/*
 	** Update entry information
 	*/
 	lp->rx_new = (++lp->rx_new) % lp->rxRingSize;
     }
-    
+
     return 0;
 }
 
@@ -1705,20 +1705,20 @@ de4x5_tx(struct net_device *dev)
     u_long iobase = dev->base_addr;
     int entry;
     s32 status;
-    
+
     for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) {
 	status = (s32)le32_to_cpu(lp->tx_ring[entry].status);
 	if (status < 0) {                     /* Buffer not sent yet */
 	    break;
 	} else if (status != 0x7fffffff) {    /* Not setup frame */
 	    if (status & TD_ES) {             /* An error happened */
-		lp->stats.tx_errors++; 
+		lp->stats.tx_errors++;
 		if (status & TD_NC) lp->stats.tx_carrier_errors++;
 		if (status & TD_LC) lp->stats.tx_window_errors++;
 		if (status & TD_UF) lp->stats.tx_fifo_errors++;
 		if (status & TD_EC) lp->pktStats.excessive_collisions++;
 		if (status & TD_DE) lp->stats.tx_aborted_errors++;
-	    
+
 		if (TX_PKT_PENDING) {
 		    outl(POLL_DEMAND, DE4X5_TPD);/* Restart a stalled TX */
 		}
@@ -1727,14 +1727,14 @@ de4x5_tx(struct net_device *dev)
 		if (lp->tx_enable) lp->linkOK++;
 	    }
 	    /* Update the collision counter */
-	    lp->stats.collisions += ((status & TD_EC) ? 16 : 
+	    lp->stats.collisions += ((status & TD_EC) ? 16 :
 				                      ((status & TD_CC) >> 3));
 
 	    /* Free the buffer. */
 	    if (lp->tx_skb[entry] != NULL)
 	    	de4x5_free_tx_buff(lp, entry);
 	}
-	
+
 	/* Update all the pointers */
 	lp->tx_old = (++lp->tx_old) % lp->txRingSize;
     }
@@ -1746,7 +1746,7 @@ de4x5_tx(struct net_device *dev)
 	else
 	    netif_start_queue(dev);
     }
-	
+
     return 0;
 }
 
@@ -1755,9 +1755,9 @@ de4x5_ast(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
     int next_tick = DE4X5_AUTOSENSE_MS;
-    
+
     disable_ast(dev);
-    
+
     if (lp->useSROM) {
 	next_tick = srom_autoconf(dev);
     } else if (lp->chipset == DC21140) {
@@ -1769,7 +1769,7 @@ de4x5_ast(struct net_device *dev)
     }
     lp->linkOK = 0;
     enable_ast(dev, next_tick);
-    
+
     return 0;
 }
 
@@ -1792,11 +1792,11 @@ de4x5_txur(struct net_device *dev)
 	}
 	outl(omr | OMR_ST | OMR_SR, DE4X5_OMR);
     }
-    
+
     return 0;
 }
 
-static int 
+static int
 de4x5_rx_ovfc(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
@@ -1813,7 +1813,7 @@ de4x5_rx_ovfc(struct net_device *dev)
     }
 
     outl(omr, DE4X5_OMR);
-    
+
     return 0;
 }
 
@@ -1823,22 +1823,22 @@ de4x5_close(struct net_device *dev)
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
     s32 imr, omr;
-    
+
     disable_ast(dev);
 
     netif_stop_queue(dev);
-    
+
     if (de4x5_debug & DEBUG_CLOSE) {
 	printk("%s: Shutting down ethercard, status was %8.8x.\n",
 	       dev->name, inl(DE4X5_STS));
     }
-    
-    /* 
+
+    /*
     ** We stop the DE4X5 here... mask interrupts and stop TX & RX
     */
     DISABLE_IRQs;
     STOP_DE4X5;
-    
+
     /* Free the associated irq */
     free_irq(dev->irq, dev);
     lp->state = CLOSED;
@@ -1846,10 +1846,10 @@ de4x5_close(struct net_device *dev)
     /* Free any socket buffers */
     de4x5_free_rx_buffs(dev);
     de4x5_free_tx_buffs(dev);
-    
+
     /* Put the adapter to sleep to save power */
     yawn(dev, SLEEP);
-    
+
     return 0;
 }
 
@@ -1858,9 +1858,9 @@ de4x5_get_stats(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
-    
+
     lp->stats.rx_missed_errors = (int)(inl(DE4X5_MFC) & (MFC_OVFL | MFC_CNTR));
-    
+
     return &lp->stats;
 }
 
@@ -1886,7 +1886,7 @@ de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len)
 	       (*(s16 *)&buf[4] == *(s16 *)&dev->dev_addr[4])) {
         lp->pktStats.unicast++;
     }
-		
+
     lp->pktStats.bins[0]++;       /* Duplicates stats.rx_packets */
     if (lp->pktStats.bins[0] == 0) { /* Reset counters */
         memset((char *)&lp->pktStats, 0, sizeof(lp->pktStats));
@@ -1937,11 +1937,11 @@ set_multicast_list(struct net_device *dev)
 	    omr = inl(DE4X5_OMR);
 	    omr |= OMR_PR;
 	    outl(omr, DE4X5_OMR);
-	} else { 
+	} else {
 	    SetMulticastFilter(dev);
-	    load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET | 
+	    load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
 			                                SETUP_FRAME_LEN, (struct sk_buff *)1);
-	    
+
 	    lp->tx_new = (++lp->tx_new) % lp->txRingSize;
 	    outl(POLL_DEMAND, DE4X5_TPD);       /* Start the TX */
 	    dev->trans_start = jiffies;
@@ -1969,20 +1969,20 @@ SetMulticastFilter(struct net_device *dev)
     omr = inl(DE4X5_OMR);
     omr &= ~(OMR_PR | OMR_PM);
     pa = build_setup_frame(dev, ALL);        /* Build the basic frame */
-    
+
     if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 14)) {
 	omr |= OMR_PM;                       /* Pass all multicasts */
     } else if (lp->setup_f == HASH_PERF) {   /* Hash Filtering */
 	for (i=0;i<dev->mc_count;i++) {      /* for each address in the list */
 	    addrs=dmi->dmi_addr;
 	    dmi=dmi->next;
-	    if ((*addrs & 0x01) == 1) {      /* multicast address? */ 
+	    if ((*addrs & 0x01) == 1) {      /* multicast address? */
 		crc = ether_crc_le(ETH_ALEN, addrs);
 		hashcode = crc & HASH_BITS;  /* hashcode is 9 LSb of CRC */
-		
+
 		byte = hashcode >> 3;        /* bit[3-8] -> byte in filter */
 		bit = 1 << (hashcode & 0x07);/* bit[0-2] -> bit in byte */
-		
+
 		byte <<= 1;                  /* calc offset into setup frame */
 		if (byte & 0x02) {
 		    byte -= 1;
@@ -1994,14 +1994,14 @@ SetMulticastFilter(struct net_device *dev)
 	for (j=0; j<dev->mc_count; j++) {
 	    addrs=dmi->dmi_addr;
 	    dmi=dmi->next;
-	    for (i=0; i<ETH_ALEN; i++) { 
+	    for (i=0; i<ETH_ALEN; i++) {
 		*(pa + (i&1)) = *addrs++;
 		if (i & 0x01) pa += 4;
 	    }
 	}
     }
     outl(omr, DE4X5_OMR);
-    
+
     return;
 }
 
@@ -2031,18 +2031,18 @@ static int __init de4x5_eisa_probe (struct device *gendev)
 		status = -EBUSY;
 		goto release_reg_1;
 	}
-	
+
 	if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) {
 		status = -ENOMEM;
 		goto release_reg_2;
 	}
 	lp = netdev_priv(dev);
-	
+
 	cfid = (u32) inl(PCI_CFID);
 	lp->cfrv = (u_short) inl(PCI_CFRV);
 	device = (cfid >> 8) & 0x00ffff00;
 	vendor = (u_short) cfid;
-	    
+
 	/* Read the EISA Configuration Registers */
 	regval = inb(EISA_REG0) & (ER0_INTL | ER0_INTT);
 #ifdef CONFIG_ALPHA
@@ -2050,7 +2050,7 @@ static int __init de4x5_eisa_probe (struct device *gendev)
 	 * care about the EISA configuration, and thus doesn't
 	 * configure the PLX bridge properly. Oh well... Simply mimic
 	 * the EISA config file to sort it out. */
-	
+
 	/* EISA REG1: Assert DecChip 21040 HW Reset */
 	outb (ER1_IAM | 1, EISA_REG1);
 	mdelay (1);
@@ -2061,12 +2061,12 @@ static int __init de4x5_eisa_probe (struct device *gendev)
 
 	/* EISA REG3: R/W Burst Transfer Enable */
 	outb (ER3_BWE | ER3_BRE, EISA_REG3);
-	
+
 	/* 32_bit slave/master, Preempt Time=23 bclks, Unlatched Interrupt */
 	outb (ER0_BSW | ER0_BMW | ER0_EPT | regval, EISA_REG0);
 #endif
 	irq = de4x5_irq[(regval >> 1) & 0x03];
-	
+
 	if (is_DC2114x) {
 	    device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
 	}
@@ -2077,7 +2077,7 @@ static int __init de4x5_eisa_probe (struct device *gendev)
 	outl(PCI_COMMAND_IO | PCI_COMMAND_MASTER, PCI_CFCS);
 	outl(0x00006000, PCI_CFLT);
 	outl(iobase, PCI_CBIO);
-	    
+
 	DevicePresent(dev, EISA_APROM);
 
 	dev->irq = irq;
@@ -2102,7 +2102,7 @@ static int __devexit de4x5_eisa_remove (struct device *device)
 
 	dev = device->driver_data;
 	iobase = dev->base_addr;
-	
+
 	unregister_netdev (dev);
 	free_netdev (dev);
 	release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE);
@@ -2131,11 +2131,11 @@ MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
 
 /*
 ** This function searches the current bus (which is >0) for a DECchip with an
-** SROM, so that in multiport cards that have one SROM shared between multiple 
+** SROM, so that in multiport cards that have one SROM shared between multiple
 ** DECchips, we can find the base SROM irrespective of the BIOS scan direction.
 ** For single port cards this is a time waster...
 */
-static void __devinit 
+static void __devinit
 srom_search(struct net_device *dev, struct pci_dev *pdev)
 {
     u_char pb;
@@ -2163,7 +2163,7 @@ srom_search(struct net_device *dev, struct pci_dev *pdev)
 	/* Set the device number information */
 	lp->device = PCI_SLOT(this_dev->devfn);
 	lp->bus_num = pb;
-	    
+
 	/* Set the chipset information */
 	if (is_DC2114x) {
 	    device = ((cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
@@ -2176,7 +2176,7 @@ srom_search(struct net_device *dev, struct pci_dev *pdev)
 	/* Fetch the IRQ to be used */
 	irq = this_dev->irq;
 	if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) continue;
-	    
+
 	/* Check if I/O accesses are enabled */
 	pci_read_config_word(this_dev, PCI_COMMAND, &status);
 	if (!(status & PCI_COMMAND_IO)) continue;
@@ -2254,7 +2254,7 @@ static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
 	lp = netdev_priv(dev);
 	lp->bus = PCI;
 	lp->bus_num = 0;
-	
+
 	/* Search for an SROM on this bus */
 	if (lp->bus_num != pb) {
 	    lp->bus_num = pb;
@@ -2267,7 +2267,7 @@ static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
 	/* Set the device number information */
 	lp->device = dev_num;
 	lp->bus_num = pb;
-	
+
 	/* Set the chipset information */
 	if (is_DC2114x) {
 	    device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
@@ -2283,7 +2283,7 @@ static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
 		error = -ENODEV;
 		goto free_dev;
 	}
-	    
+
 	/* Check if I/O accesses and Bus Mastering are enabled */
 	pci_read_config_word(pdev, PCI_COMMAND, &status);
 #ifdef __powerpc__
@@ -2322,7 +2322,7 @@ static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
 	}
 
 	dev->irq = irq;
-	
+
 	if ((error = de4x5_hw_init(dev, iobase, &pdev->dev))) {
 		goto release;
 	}
@@ -2377,7 +2377,7 @@ static struct pci_driver de4x5_pci_driver = {
 ** Auto configure the media here rather than setting the port at compile
 ** time. This routine is called by de4x5_init() and when a loss of media is
 ** detected (excessive collisions, loss of carrier, no carrier or link fail
-** [TP] or no recent receive activity) to check whether the user has been 
+** [TP] or no recent receive activity) to check whether the user has been
 ** sneaky and changed the port on us.
 */
 static int
@@ -2405,7 +2405,7 @@ autoconf_media(struct net_device *dev)
     }
 
     enable_ast(dev, next_tick);
-    
+
     return (lp->media);
 }
 
@@ -2428,7 +2428,7 @@ dc21040_autoconf(struct net_device *dev)
     u_long iobase = dev->base_addr;
     int next_tick = DE4X5_AUTOSENSE_MS;
     s32 imr;
-    
+
     switch (lp->media) {
     case INIT:
 	DISABLE_IRQs;
@@ -2447,36 +2447,36 @@ dc21040_autoconf(struct net_device *dev)
 	lp->local_state = 0;
 	next_tick = dc21040_autoconf(dev);
 	break;
-	
+
     case TP:
-	next_tick = dc21040_state(dev, 0x8f01, 0xffff, 0x0000, 3000, BNC_AUI, 
+	next_tick = dc21040_state(dev, 0x8f01, 0xffff, 0x0000, 3000, BNC_AUI,
 		                                         TP_SUSPECT, test_tp);
 	break;
-	
+
     case TP_SUSPECT:
 	next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21040_autoconf);
 	break;
-	
+
     case BNC:
     case AUI:
     case BNC_AUI:
-	next_tick = dc21040_state(dev, 0x8f09, 0x0705, 0x0006, 3000, EXT_SIA, 
+	next_tick = dc21040_state(dev, 0x8f09, 0x0705, 0x0006, 3000, EXT_SIA,
 		                                  BNC_AUI_SUSPECT, ping_media);
 	break;
-	
+
     case BNC_AUI_SUSPECT:
 	next_tick = de4x5_suspect_state(dev, 1000, BNC_AUI, ping_media, dc21040_autoconf);
 	break;
-	
+
     case EXT_SIA:
-	next_tick = dc21040_state(dev, 0x3041, 0x0000, 0x0006, 3000, 
+	next_tick = dc21040_state(dev, 0x3041, 0x0000, 0x0006, 3000,
 		                              NC, EXT_SIA_SUSPECT, ping_media);
 	break;
-	
+
     case EXT_SIA_SUSPECT:
 	next_tick = de4x5_suspect_state(dev, 1000, EXT_SIA, ping_media, dc21040_autoconf);
 	break;
-	
+
     case NC:
 	/* default to TP for all */
 	reset_init_sia(dev, 0x8f01, 0xffff, 0x0000);
@@ -2488,13 +2488,13 @@ dc21040_autoconf(struct net_device *dev)
 	lp->tx_enable = NO;
 	break;
     }
-    
+
     return next_tick;
 }
 
 static int
 dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout,
-	      int next_state, int suspect_state, 
+	      int next_state, int suspect_state,
 	      int (*fn)(struct net_device *, int))
 {
     struct de4x5_private *lp = netdev_priv(dev);
@@ -2507,7 +2507,7 @@ dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeo
 	lp->local_state++;
 	next_tick = 500;
 	break;
-	    
+
     case 1:
 	if (!lp->tx_enable) {
 	    linkBad = fn(dev, timeout);
@@ -2527,7 +2527,7 @@ dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeo
 	}
 	break;
     }
-    
+
     return next_tick;
 }
 
@@ -2582,7 +2582,7 @@ dc21041_autoconf(struct net_device *dev)
     u_long iobase = dev->base_addr;
     s32 sts, irqs, irq_mask, imr, omr;
     int next_tick = DE4X5_AUTOSENSE_MS;
-    
+
     switch (lp->media) {
     case INIT:
 	DISABLE_IRQs;
@@ -2603,7 +2603,7 @@ dc21041_autoconf(struct net_device *dev)
 	lp->local_state = 0;
 	next_tick = dc21041_autoconf(dev);
 	break;
-	
+
     case TP_NW:
 	if (lp->timeout < 0) {
 	    omr = inl(DE4X5_OMR);/* Set up full duplex for the autonegotiate */
@@ -2623,7 +2623,7 @@ dc21041_autoconf(struct net_device *dev)
 	    next_tick = dc21041_autoconf(dev);
 	}
 	break;
-	
+
     case ANS:
 	if (!lp->tx_enable) {
 	    irqs = STS_LNP;
@@ -2645,11 +2645,11 @@ dc21041_autoconf(struct net_device *dev)
 	    next_tick = 3000;
 	}
 	break;
-	
+
     case ANS_SUSPECT:
 	next_tick = de4x5_suspect_state(dev, 1000, ANS, test_tp, dc21041_autoconf);
 	break;
-	
+
     case TP:
 	if (!lp->tx_enable) {
 	    if (lp->timeout < 0) {
@@ -2679,11 +2679,11 @@ dc21041_autoconf(struct net_device *dev)
 	    next_tick = 3000;
 	}
 	break;
-	
+
     case TP_SUSPECT:
 	next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21041_autoconf);
 	break;
-	
+
     case AUI:
 	if (!lp->tx_enable) {
 	    if (lp->timeout < 0) {
@@ -2709,11 +2709,11 @@ dc21041_autoconf(struct net_device *dev)
 	    next_tick = 3000;
 	}
 	break;
-	
+
     case AUI_SUSPECT:
 	next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc21041_autoconf);
 	break;
-	
+
     case BNC:
 	switch (lp->local_state) {
 	case 0:
@@ -2731,7 +2731,7 @@ dc21041_autoconf(struct net_device *dev)
 		next_tick = dc21041_autoconf(dev);
 	    }
 	    break;
-	    
+
 	case 1:
 	    if (!lp->tx_enable) {
 		if ((sts = ping_media(dev, 3000)) < 0) {
@@ -2751,11 +2751,11 @@ dc21041_autoconf(struct net_device *dev)
 	    break;
 	}
 	break;
-	
+
     case BNC_SUSPECT:
 	next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc21041_autoconf);
 	break;
-	
+
     case NC:
 	omr = inl(DE4X5_OMR);    /* Set up full duplex for the autonegotiate */
 	outl(omr | OMR_FDX, DE4X5_OMR);
@@ -2768,7 +2768,7 @@ dc21041_autoconf(struct net_device *dev)
 	lp->tx_enable = NO;
 	break;
     }
-    
+
     return next_tick;
 }
 
@@ -2784,9 +2784,9 @@ dc21140m_autoconf(struct net_device *dev)
     int ana, anlpa, cap, cr, slnk, sr;
     int next_tick = DE4X5_AUTOSENSE_MS;
     u_long imr, omr, iobase = dev->base_addr;
-    
+
     switch(lp->media) {
-    case INIT: 
+    case INIT:
         if (lp->timeout < 0) {
 	    DISABLE_IRQs;
 	    lp->tx_enable = FALSE;
@@ -2813,7 +2813,7 @@ dc21140m_autoconf(struct net_device *dev)
 		    lp->media = _100Mb;
 		} else if (lp->autosense == _10Mb) {
 		    lp->media = _10Mb;
-		} else if ((lp->autosense == AUTO) && 
+		} else if ((lp->autosense == AUTO) &&
 			            ((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
 		    ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
 		    ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
@@ -2831,7 +2831,7 @@ dc21140m_autoconf(struct net_device *dev)
 	    next_tick = dc21140m_autoconf(dev);
 	}
 	break;
-	
+
     case ANS:
 	switch (lp->local_state) {
 	case 0:
@@ -2851,7 +2851,7 @@ dc21140m_autoconf(struct net_device *dev)
 		next_tick = dc21140m_autoconf(dev);
 	    }
 	    break;
-	    
+
 	case 1:
 	    if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, TRUE, 2000)) < 0) {
 		next_tick = sr & ~TIMER_CB;
@@ -2862,7 +2862,7 @@ dc21140m_autoconf(struct net_device *dev)
 		    lp->tmp = MII_SR_ASSC;
 		    anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
 		    ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
-		    if (!(anlpa & MII_ANLPA_RF) && 
+		    if (!(anlpa & MII_ANLPA_RF) &&
 			 (cap = anlpa & MII_ANLPA_TAF & ana)) {
 			if (cap & MII_ANA_100M) {
 			    lp->fdx = ((ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) ? TRUE : FALSE);
@@ -2879,10 +2879,10 @@ dc21140m_autoconf(struct net_device *dev)
 	    break;
 	}
 	break;
-	
+
     case SPD_DET:                              /* Choose 10Mb/s or 100Mb/s */
         if (lp->timeout < 0) {
-	    lp->tmp = (lp->phy[lp->active].id ? MII_SR_LKS : 
+	    lp->tmp = (lp->phy[lp->active].id ? MII_SR_LKS :
 		                                  (~gep_rd(dev) & GEP_LNP));
 	    SET_100Mb_PDET;
 	}
@@ -2899,7 +2899,7 @@ dc21140m_autoconf(struct net_device *dev)
 	    next_tick = dc21140m_autoconf(dev);
 	}
 	break;
-	
+
     case _100Mb:                               /* Set 100Mb/s */
         next_tick = 3000;
 	if (!lp->tx_enable) {
@@ -2933,7 +2933,7 @@ dc21140m_autoconf(struct net_device *dev)
 	    }
 	}
 	break;
-	
+
     case NC:
         if (lp->media != lp->c_media) {
 	    de4x5_dbg_media(dev);
@@ -2943,7 +2943,7 @@ dc21140m_autoconf(struct net_device *dev)
 	lp->tx_enable = FALSE;
 	break;
     }
-    
+
     return next_tick;
 }
 
@@ -3002,7 +3002,7 @@ dc2114x_autoconf(struct net_device *dev)
 		lp->media = AUI;
 	    } else {
 		lp->media = SPD_DET;
-		if ((lp->infoblock_media == ANS) && 
+		if ((lp->infoblock_media == ANS) &&
 		                    ((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
 		    ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
 		    ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
@@ -3014,7 +3014,7 @@ dc2114x_autoconf(struct net_device *dev)
 	    next_tick = dc2114x_autoconf(dev);
         }
 	break;
-	
+
     case ANS:
 	switch (lp->local_state) {
 	case 0:
@@ -3034,7 +3034,7 @@ dc2114x_autoconf(struct net_device *dev)
 		next_tick = dc2114x_autoconf(dev);
 	    }
 	    break;
-	    
+
 	case 1:
 	    if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, TRUE, 2000)) < 0) {
 		next_tick = sr & ~TIMER_CB;
@@ -3045,7 +3045,7 @@ dc2114x_autoconf(struct net_device *dev)
 		    lp->tmp = MII_SR_ASSC;
 		    anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
 		    ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
-		    if (!(anlpa & MII_ANLPA_RF) && 
+		    if (!(anlpa & MII_ANLPA_RF) &&
 			 (cap = anlpa & MII_ANLPA_TAF & ana)) {
 			if (cap & MII_ANA_100M) {
 			    lp->fdx = ((ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) ? TRUE : FALSE);
@@ -3087,11 +3087,11 @@ dc2114x_autoconf(struct net_device *dev)
 	    next_tick = 3000;
 	}
 	break;
-	
+
     case AUI_SUSPECT:
 	next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc2114x_autoconf);
 	break;
-	
+
     case BNC:
 	switch (lp->local_state) {
 	case 0:
@@ -3109,7 +3109,7 @@ dc2114x_autoconf(struct net_device *dev)
 		next_tick = dc2114x_autoconf(dev);
 	    }
 	    break;
-	    
+
 	case 1:
 	    if (!lp->tx_enable) {
 		if ((sts = ping_media(dev, 3000)) < 0) {
@@ -3130,11 +3130,11 @@ dc2114x_autoconf(struct net_device *dev)
 	    break;
 	}
 	break;
-	
+
     case BNC_SUSPECT:
 	next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc2114x_autoconf);
 	break;
-	
+
     case SPD_DET:                              /* Choose 10Mb/s or 100Mb/s */
 	  if (srom_map_media(dev) < 0) {
 	      lp->tcount++;
@@ -3161,7 +3161,7 @@ dc2114x_autoconf(struct net_device *dev)
 	      next_tick = dc2114x_autoconf(dev);
 	  } else if (((lp->media == _100Mb) && is_100_up(dev)) ||
 		     (((lp->media == _10Mb) || (lp->media == TP) ||
-		       (lp->media == BNC)   || (lp->media == AUI)) && 
+		       (lp->media == BNC)   || (lp->media == AUI)) &&
 		      is_10_up(dev))) {
 	      next_tick = dc2114x_autoconf(dev);
 	  } else {
@@ -3169,7 +3169,7 @@ dc2114x_autoconf(struct net_device *dev)
 	      lp->media = INIT;
 	  }
 	  break;
-	
+
     case _10Mb:
         next_tick = 3000;
 	if (!lp->tx_enable) {
@@ -3208,7 +3208,7 @@ printk("Huh?: media:%02x\n", lp->media);
 	lp->media = INIT;
 	break;
     }
-    
+
     return next_tick;
 }
 
@@ -3231,7 +3231,7 @@ srom_map_media(struct net_device *dev)
     struct de4x5_private *lp = netdev_priv(dev);
 
     lp->fdx = 0;
-    if (lp->infoblock_media == lp->media) 
+    if (lp->infoblock_media == lp->media)
       return 0;
 
     switch(lp->infoblock_media) {
@@ -3270,7 +3270,7 @@ srom_map_media(struct net_device *dev)
       case SROM_100BASEFF:
 	if (!lp->params.fdx) return -1;
 	lp->fdx = TRUE;
-      case SROM_100BASEF: 
+      case SROM_100BASEF:
 	if (lp->params.fdx && !lp->fdx) return -1;
 	lp->media = _100Mb;
 	break;
@@ -3280,8 +3280,8 @@ srom_map_media(struct net_device *dev)
 	lp->fdx = lp->params.fdx;
 	break;
 
-      default: 
-	printk("%s: Bad media code [%d] detected in SROM!\n", dev->name, 
+      default:
+	printk("%s: Bad media code [%d] detected in SROM!\n", dev->name,
 	                                                  lp->infoblock_media);
 	return -1;
 	break;
@@ -3359,7 +3359,7 @@ test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14,
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
     s32 sts, csr12;
-    
+
     if (lp->timeout < 0) {
 	lp->timeout = msec/100;
 	if (!lp->useSROM) {      /* Already done if by SROM, else dc2104[01] */
@@ -3372,22 +3372,22 @@ test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14,
 	/* clear all pending interrupts */
 	sts = inl(DE4X5_STS);
 	outl(sts, DE4X5_STS);
-	
+
 	/* clear csr12 NRA and SRA bits */
 	if ((lp->chipset == DC21041) || lp->useSROM) {
 	    csr12 = inl(DE4X5_SISR);
 	    outl(csr12, DE4X5_SISR);
 	}
     }
-    
+
     sts = inl(DE4X5_STS) & ~TIMER_CB;
-    
+
     if (!(sts & irqs) && --lp->timeout) {
 	sts = 100 | TIMER_CB;
     } else {
 	lp->timeout = -1;
     }
-    
+
     return sts;
 }
 
@@ -3397,11 +3397,11 @@ test_tp(struct net_device *dev, s32 msec)
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
     int sisr;
-    
+
     if (lp->timeout < 0) {
 	lp->timeout = msec/100;
     }
-    
+
     sisr = (inl(DE4X5_SISR) & ~TIMER_CB) & (SISR_LKF | SISR_NCR);
 
     if (sisr && --lp->timeout) {
@@ -3409,7 +3409,7 @@ test_tp(struct net_device *dev, s32 msec)
     } else {
 	lp->timeout = -1;
     }
-    
+
     return sisr;
 }
 
@@ -3436,7 +3436,7 @@ test_for_100Mb(struct net_device *dev, int msec)
 	    lp->timeout = msec/SAMPLE_INTERVAL;
 	}
     }
-    
+
     if (lp->phy[lp->active].id || lp->useSROM) {
 	gep = is_100_up(dev) | is_spd_100(dev);
     } else {
@@ -3447,7 +3447,7 @@ test_for_100Mb(struct net_device *dev, int msec)
     } else {
 	lp->timeout = -1;
     }
-    
+
     return gep;
 }
 
@@ -3459,13 +3459,13 @@ wait_for_link(struct net_device *dev)
     if (lp->timeout < 0) {
 	lp->timeout = 1;
     }
-    
+
     if (lp->timeout--) {
 	return TIMER_CB;
     } else {
 	lp->timeout = -1;
     }
-    
+
     return 0;
 }
 
@@ -3479,21 +3479,21 @@ test_mii_reg(struct net_device *dev, int reg, int mask, int pol, long msec)
     struct de4x5_private *lp = netdev_priv(dev);
     int test;
     u_long iobase = dev->base_addr;
-    
+
     if (lp->timeout < 0) {
 	lp->timeout = msec/100;
     }
-    
+
     if (pol) pol = ~0;
     reg = mii_rd((u_char)reg, lp->phy[lp->active].addr, DE4X5_MII) & mask;
     test = (reg ^ pol) & mask;
-    
+
     if (test && --lp->timeout) {
 	reg = 100 | TIMER_CB;
     } else {
 	lp->timeout = -1;
     }
-    
+
     return reg;
 }
 
@@ -3503,7 +3503,7 @@ is_spd_100(struct net_device *dev)
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
     int spd;
-    
+
     if (lp->useMII) {
 	spd = mii_rd(lp->phy[lp->active].spd.reg, lp->phy[lp->active].addr, DE4X5_MII);
 	spd = ~(spd ^ lp->phy[lp->active].spd.value);
@@ -3517,7 +3517,7 @@ is_spd_100(struct net_device *dev)
 	spd = (lp->asBitValid & (lp->asPolarity ^ (gep_rd(dev) & lp->asBit))) |
 	          (lp->linkOK & ~lp->asBitValid);
     }
-    
+
     return spd;
 }
 
@@ -3526,7 +3526,7 @@ is_100_up(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
-    
+
     if (lp->useMII) {
 	/* Double read for sticky bits & temporary drops */
 	mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
@@ -3547,7 +3547,7 @@ is_10_up(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
-    
+
     if (lp->useMII) {
 	/* Double read for sticky bits & temporary drops */
 	mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
@@ -3570,7 +3570,7 @@ is_anc_capable(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
-    
+
     if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
 	return (mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII));
     } else if ((lp->chipset & ~0x00ff) == DC2114x) {
@@ -3590,24 +3590,24 @@ ping_media(struct net_device *dev, int msec)
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
     int sisr;
-    
+
     if (lp->timeout < 0) {
 	lp->timeout = msec/100;
-	
+
 	lp->tmp = lp->tx_new;                /* Remember the ring position */
 	load_packet(dev, lp->frame, TD_LS | TD_FS | sizeof(lp->frame), (struct sk_buff *)1);
 	lp->tx_new = (++lp->tx_new) % lp->txRingSize;
 	outl(POLL_DEMAND, DE4X5_TPD);
     }
-    
+
     sisr = inl(DE4X5_SISR);
 
-    if ((!(sisr & SISR_NCR)) && 
-	((s32)le32_to_cpu(lp->tx_ring[lp->tmp].status) < 0) && 
+    if ((!(sisr & SISR_NCR)) &&
+	((s32)le32_to_cpu(lp->tx_ring[lp->tmp].status) < 0) &&
 	 (--lp->timeout)) {
 	sisr = 100 | TIMER_CB;
     } else {
-	if ((!(sisr & SISR_NCR)) && 
+	if ((!(sisr & SISR_NCR)) &&
 	    !(le32_to_cpu(lp->tx_ring[lp->tmp].status) & (T_OWN | TD_ES)) &&
 	    lp->timeout) {
 	    sisr = 0;
@@ -3616,7 +3616,7 @@ ping_media(struct net_device *dev, int msec)
 	}
 	lp->timeout = -1;
     }
-    
+
     return sisr;
 }
 
@@ -3668,7 +3668,7 @@ de4x5_alloc_rx_buff(struct net_device *dev, int index, int len)
     } else {                                           /* Linear buffer */
 	memcpy(skb_put(p,len),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,len);
     }
-		    
+
     return p;
 #endif
 }
@@ -3751,23 +3751,23 @@ de4x5_rst_desc_ring(struct net_device *dev)
 	outl(lp->dma_rings, DE4X5_RRBA);
 	outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
 	     DE4X5_TRBA);
-    
+
 	lp->rx_new = lp->rx_old = 0;
 	lp->tx_new = lp->tx_old = 0;
-    
+
 	for (i = 0; i < lp->rxRingSize; i++) {
 	    lp->rx_ring[i].status = cpu_to_le32(R_OWN);
 	}
-    
+
 	for (i = 0; i < lp->txRingSize; i++) {
 	    lp->tx_ring[i].status = cpu_to_le32(0);
 	}
-    
+
 	barrier();
 	lp->cache.save_cnt--;
 	START_DE4X5;
     }
-        
+
     return;
 }
 
@@ -3792,7 +3792,7 @@ de4x5_cache_state(struct net_device *dev, int flag)
 	    gep_wr(lp->cache.gepc, dev);
 	    gep_wr(lp->cache.gep, dev);
 	} else {
-	    reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14, 
+	    reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14,
 			                                      lp->cache.csr15);
 	}
 	break;
@@ -3854,25 +3854,25 @@ test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec)
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
     s32 sts, ans;
-    
+
     if (lp->timeout < 0) {
 	lp->timeout = msec/100;
 	outl(irq_mask, DE4X5_IMR);
-	
+
 	/* clear all pending interrupts */
 	sts = inl(DE4X5_STS);
 	outl(sts, DE4X5_STS);
     }
-    
+
     ans = inl(DE4X5_SISR) & SISR_ANS;
     sts = inl(DE4X5_STS) & ~TIMER_CB;
-    
+
     if (!(sts & irqs) && (ans ^ ANS_NWOK) && --lp->timeout) {
 	sts = 100 | TIMER_CB;
     } else {
 	lp->timeout = -1;
     }
-    
+
     return sts;
 }
 
@@ -3882,7 +3882,7 @@ de4x5_setup_intr(struct net_device *dev)
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
     s32 imr, sts;
-    
+
     if (inl(DE4X5_OMR) & OMR_SR) {   /* Only unmask if TX/RX is enabled */
 	imr = 0;
 	UNMASK_IRQs;
@@ -3890,7 +3890,7 @@ de4x5_setup_intr(struct net_device *dev)
 	outl(sts, DE4X5_STS);
 	ENABLE_IRQs;
     }
-    
+
     return;
 }
 
@@ -3936,17 +3936,17 @@ create_packet(struct net_device *dev, char *frame, int len)
 {
     int i;
     char *buf = frame;
-    
+
     for (i=0; i<ETH_ALEN; i++) {             /* Use this source address */
 	*buf++ = dev->dev_addr[i];
     }
     for (i=0; i<ETH_ALEN; i++) {             /* Use this destination address */
 	*buf++ = dev->dev_addr[i];
     }
-    
+
     *buf++ = 0;                              /* Packet length (2 bytes) */
     *buf++ = 1;
-    
+
     return;
 }
 
@@ -3978,7 +3978,7 @@ static int
 PCI_signature(char *name, struct de4x5_private *lp)
 {
     int i, status = 0, siglen = sizeof(de4x5_signatures)/sizeof(c_char *);
-    
+
     if (lp->chipset == DC21040) {
 	strcpy(name, "DE434/5");
 	return status;
@@ -4007,7 +4007,7 @@ PCI_signature(char *name, struct de4x5_private *lp)
     } else if ((lp->chipset & ~0x00ff) == DC2114x) {
 	lp->useSROM = TRUE;
     }
-    
+
     return status;
 }
 
@@ -4024,7 +4024,7 @@ DevicePresent(struct net_device *dev, u_long aprom_addr)
 {
     int i, j=0;
     struct de4x5_private *lp = netdev_priv(dev);
-    
+
     if (lp->chipset == DC21040) {
 	if (lp->bus == EISA) {
 	    enet_addr_rst(aprom_addr); /* Reset Ethernet Address ROM Pointer */
@@ -4049,7 +4049,7 @@ DevicePresent(struct net_device *dev, u_long aprom_addr)
 	}
 	de4x5_dbg_srom((struct de4x5_srom *)&lp->srom);
     }
-    
+
     return;
 }
 
@@ -4071,11 +4071,11 @@ enet_addr_rst(u_long aprom_addr)
     short sigLength=0;
     s8 data;
     int i, j;
-    
+
     dev.llsig.a = ETH_PROM_SIG;
     dev.llsig.b = ETH_PROM_SIG;
     sigLength = sizeof(u32) << 1;
-    
+
     for (i=0,j=0;j<sigLength && i<PROBE_LENGTH+sigLength-1;i++) {
 	data = inb(aprom_addr);
 	if (dev.Sig[j] == data) {    /* track signature */
@@ -4088,7 +4088,7 @@ enet_addr_rst(u_long aprom_addr)
 	    }
 	}
     }
-    
+
     return;
 }
 
@@ -4111,7 +4111,7 @@ get_hw_addr(struct net_device *dev)
     for (i=0,k=0,j=0;j<3;j++) {
 	k <<= 1;
 	if (k > 0xffff) k-=0xffff;
-	
+
 	if (lp->bus == PCI) {
 	    if (lp->chipset == DC21040) {
 		while ((tmp = inl(DE4X5_APROM)) < 0);
@@ -4133,11 +4133,11 @@ get_hw_addr(struct net_device *dev)
 	    k += (u_short) ((tmp = inb(EISA_APROM)) << 8);
 	    dev->dev_addr[i++] = (u_char) tmp;
 	}
-	
+
 	if (k > 0xffff) k-=0xffff;
     }
     if (k == 0xffff) k=0;
-    
+
     if (lp->bus == PCI) {
 	if (lp->chipset == DC21040) {
 	    while ((tmp = inl(DE4X5_APROM)) < 0);
@@ -4156,7 +4156,7 @@ get_hw_addr(struct net_device *dev)
     srom_repair(dev, broken);
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
-    /* 
+    /*
     ** If the address starts with 00 a0, we have to bit-reverse
     ** each byte of the address.
     */
@@ -4245,7 +4245,7 @@ test_bad_enet(struct net_device *dev, int status)
 
     for (tmp=0,i=0; i<ETH_ALEN; i++) tmp += (u_char)dev->dev_addr[i];
     if ((tmp == 0) || (tmp == 0x5fa)) {
-	if ((lp->chipset == last.chipset) && 
+	if ((lp->chipset == last.chipset) &&
 	    (lp->bus_num == last.bus) && (lp->bus_num > 0)) {
 	    for (i=0; i<ETH_ALEN; i++) dev->dev_addr[i] = last.addr[i];
 	    for (i=ETH_ALEN-1; i>2; --i) {
@@ -4275,7 +4275,7 @@ test_bad_enet(struct net_device *dev, int status)
 static int
 an_exception(struct de4x5_private *lp)
 {
-    if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) && 
+    if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) &&
 	(*(u_short *)lp->srom.sub_system_id == 0x95e0)) {
 	return -1;
     }
@@ -4290,11 +4290,11 @@ static short
 srom_rd(u_long addr, u_char offset)
 {
     sendto_srom(SROM_RD | SROM_SR, addr);
-    
+
     srom_latch(SROM_RD | SROM_SR | DT_CS, addr);
     srom_command(SROM_RD | SROM_SR | DT_IN | DT_CS, addr);
     srom_address(SROM_RD | SROM_SR | DT_CS, addr, offset);
-    
+
     return srom_data(SROM_RD | SROM_SR | DT_CS, addr);
 }
 
@@ -4304,7 +4304,7 @@ srom_latch(u_int command, u_long addr)
     sendto_srom(command, addr);
     sendto_srom(command | DT_CLK, addr);
     sendto_srom(command, addr);
-    
+
     return;
 }
 
@@ -4314,7 +4314,7 @@ srom_command(u_int command, u_long addr)
     srom_latch(command, addr);
     srom_latch(command, addr);
     srom_latch((command & 0x0000ff00) | DT_CS, addr);
-    
+
     return;
 }
 
@@ -4322,15 +4322,15 @@ static void
 srom_address(u_int command, u_long addr, u_char offset)
 {
     int i, a;
-    
+
     a = offset << 2;
     for (i=0; i<6; i++, a <<= 1) {
 	srom_latch(command | ((a & 0x80) ? DT_IN : 0), addr);
     }
     udelay(1);
-    
+
     i = (getfrom_srom(addr) >> 3) & 0x01;
-    
+
     return;
 }
 
@@ -4340,17 +4340,17 @@ srom_data(u_int command, u_long addr)
     int i;
     short word = 0;
     s32 tmp;
-    
+
     for (i=0; i<16; i++) {
 	sendto_srom(command  | DT_CLK, addr);
 	tmp = getfrom_srom(addr);
 	sendto_srom(command, addr);
-	
+
 	word = (word << 1) | ((tmp >> 3) & 0x01);
     }
-    
+
     sendto_srom(command & 0x0000ff00, addr);
-    
+
     return word;
 }
 
@@ -4359,13 +4359,13 @@ static void
 srom_busy(u_int command, u_long addr)
 {
    sendto_srom((command & 0x0000ff00) | DT_CS, addr);
-   
+
    while (!((getfrom_srom(addr) >> 3) & 0x01)) {
        mdelay(1);
    }
-   
+
    sendto_srom(command & 0x0000ff00, addr);
-   
+
    return;
 }
 */
@@ -4375,7 +4375,7 @@ sendto_srom(u_int command, u_long addr)
 {
     outl(command, addr);
     udelay(1);
-    
+
     return;
 }
 
@@ -4383,10 +4383,10 @@ static int
 getfrom_srom(u_long addr)
 {
     s32 tmp;
-    
+
     tmp = inl(addr);
     udelay(1);
-    
+
     return tmp;
 }
 
@@ -4403,7 +4403,7 @@ srom_infoleaf_info(struct net_device *dev)
     }
     if (i == INFOLEAF_SIZE) {
 	lp->useSROM = FALSE;
-	printk("%s: Cannot find correct chipset for SROM decoding!\n", 
+	printk("%s: Cannot find correct chipset for SROM decoding!\n",
 	                                                          dev->name);
 	return -ENXIO;
     }
@@ -4420,7 +4420,7 @@ srom_infoleaf_info(struct net_device *dev)
 	}
 	if (i == 0) {
 	    lp->useSROM = FALSE;
-	    printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n", 
+	    printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n",
 	                                               dev->name, lp->device);
 	    return -ENXIO;
 	}
@@ -4494,9 +4494,9 @@ srom_exec(struct net_device *dev, u_char *p)
     if (((lp->ibn != 1) && (lp->ibn != 3) && (lp->ibn != 5)) || !count) return;
 
     if (lp->chipset != DC21140) RESET_SIA;
- 
+
     while (count--) {
-	gep_wr(((lp->chipset==DC21140) && (lp->ibn!=5) ? 
+	gep_wr(((lp->chipset==DC21140) && (lp->ibn!=5) ?
 		                                   *p++ : TWIDDLE(w++)), dev);
 	mdelay(2);                          /* 2ms per action */
     }
@@ -4514,13 +4514,13 @@ srom_exec(struct net_device *dev, u_char *p)
 ** unless I implement the DC21041 SROM functions. There's no need
 ** since the existing code will be satisfactory for all boards.
 */
-static int 
+static int
 dc21041_infoleaf(struct net_device *dev)
 {
     return DE4X5_AUTOSENSE_MS;
 }
 
-static int 
+static int
 dc21140_infoleaf(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
@@ -4558,7 +4558,7 @@ dc21140_infoleaf(struct net_device *dev)
     return next_tick & ~TIMER_CB;
 }
 
-static int 
+static int
 dc21142_infoleaf(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
@@ -4593,7 +4593,7 @@ dc21142_infoleaf(struct net_device *dev)
     return next_tick & ~TIMER_CB;
 }
 
-static int 
+static int
 dc21143_infoleaf(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
@@ -4631,7 +4631,7 @@ dc21143_infoleaf(struct net_device *dev)
 ** The compact infoblock is only designed for DC21140[A] chips, so
 ** we'll reuse the dc21140m_autoconf function. Non MII media only.
 */
-static int 
+static int
 compact_infoblock(struct net_device *dev, u_char count, u_char *p)
 {
     struct de4x5_private *lp = netdev_priv(dev);
@@ -4671,7 +4671,7 @@ compact_infoblock(struct net_device *dev, u_char count, u_char *p)
 /*
 ** This block describes non MII media for the DC21140[A] only.
 */
-static int 
+static int
 type0_infoblock(struct net_device *dev, u_char count, u_char *p)
 {
     struct de4x5_private *lp = netdev_priv(dev);
@@ -4711,7 +4711,7 @@ type0_infoblock(struct net_device *dev, u_char count, u_char *p)
 
 /* These functions are under construction! */
 
-static int 
+static int
 type1_infoblock(struct net_device *dev, u_char count, u_char *p)
 {
     struct de4x5_private *lp = netdev_priv(dev);
@@ -4750,7 +4750,7 @@ type1_infoblock(struct net_device *dev, u_char count, u_char *p)
     return dc21140m_autoconf(dev);
 }
 
-static int 
+static int
 type2_infoblock(struct net_device *dev, u_char count, u_char *p)
 {
     struct de4x5_private *lp = netdev_priv(dev);
@@ -4791,7 +4791,7 @@ type2_infoblock(struct net_device *dev, u_char count, u_char *p)
     return dc2114x_autoconf(dev);
 }
 
-static int 
+static int
 type3_infoblock(struct net_device *dev, u_char count, u_char *p)
 {
     struct de4x5_private *lp = netdev_priv(dev);
@@ -4833,7 +4833,7 @@ type3_infoblock(struct net_device *dev, u_char count, u_char *p)
     return dc2114x_autoconf(dev);
 }
 
-static int 
+static int
 type4_infoblock(struct net_device *dev, u_char count, u_char *p)
 {
     struct de4x5_private *lp = netdev_priv(dev);
@@ -4878,7 +4878,7 @@ type4_infoblock(struct net_device *dev, u_char count, u_char *p)
 ** This block type provides information for resetting external devices
 ** (chips) through the General Purpose Register.
 */
-static int 
+static int
 type5_infoblock(struct net_device *dev, u_char count, u_char *p)
 {
     struct de4x5_private *lp = netdev_priv(dev);
@@ -4916,7 +4916,7 @@ mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr)
     mii_address(phyaddr, ioaddr);          /* PHY address to be accessed     */
     mii_address(phyreg, ioaddr);           /* PHY Register to read           */
     mii_ta(MII_STRD, ioaddr);              /* Turn around time - 2 MDC       */
-    
+
     return mii_rdata(ioaddr);              /* Read data                      */
 }
 
@@ -4931,7 +4931,7 @@ mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr)
     mii_ta(MII_STWR, ioaddr);              /* Turn around time - 2 MDC       */
     data = mii_swap(data, 16);             /* Swap data bit ordering         */
     mii_wdata(data, 16, ioaddr);           /* Write data                     */
-    
+
     return;
 }
 
@@ -4940,12 +4940,12 @@ mii_rdata(u_long ioaddr)
 {
     int i;
     s32 tmp = 0;
-    
+
     for (i=0; i<16; i++) {
 	tmp <<= 1;
 	tmp |= getfrom_mii(MII_MRD | MII_RD, ioaddr);
     }
-    
+
     return tmp;
 }
 
@@ -4953,12 +4953,12 @@ static void
 mii_wdata(int data, int len, u_long ioaddr)
 {
     int i;
-    
+
     for (i=0; i<len; i++) {
 	sendto_mii(MII_MWR | MII_WR, data, ioaddr);
 	data >>= 1;
     }
-    
+
     return;
 }
 
@@ -4966,13 +4966,13 @@ static void
 mii_address(u_char addr, u_long ioaddr)
 {
     int i;
-    
+
     addr = mii_swap(addr, 5);
     for (i=0; i<5; i++) {
 	sendto_mii(MII_MWR | MII_WR, addr, ioaddr);
 	addr >>= 1;
     }
-    
+
     return;
 }
 
@@ -4980,12 +4980,12 @@ static void
 mii_ta(u_long rw, u_long ioaddr)
 {
     if (rw == MII_STWR) {
-	sendto_mii(MII_MWR | MII_WR, 1, ioaddr);  
-	sendto_mii(MII_MWR | MII_WR, 0, ioaddr);  
+	sendto_mii(MII_MWR | MII_WR, 1, ioaddr);
+	sendto_mii(MII_MWR | MII_WR, 0, ioaddr);
     } else {
 	getfrom_mii(MII_MRD | MII_RD, ioaddr);        /* Tri-state MDIO */
     }
-    
+
     return;
 }
 
@@ -4993,13 +4993,13 @@ static int
 mii_swap(int data, int len)
 {
     int i, tmp = 0;
-    
+
     for (i=0; i<len; i++) {
 	tmp <<= 1;
 	tmp |= (data & 1);
 	data >>= 1;
     }
-    
+
     return tmp;
 }
 
@@ -5007,13 +5007,13 @@ static void
 sendto_mii(u32 command, int data, u_long ioaddr)
 {
     u32 j;
-    
+
     j = (data & 1) << 17;
     outl(command | j, ioaddr);
     udelay(1);
     outl(command | MII_MDC | j, ioaddr);
     udelay(1);
-    
+
     return;
 }
 
@@ -5024,7 +5024,7 @@ getfrom_mii(u32 command, u_long ioaddr)
     udelay(1);
     outl(command | MII_MDC, ioaddr);
     udelay(1);
-    
+
     return ((inl(ioaddr) >> 19) & 1);
 }
 
@@ -5085,7 +5085,7 @@ mii_get_phy(struct net_device *dev)
     u_long iobase = dev->base_addr;
     int i, j, k, n, limit=sizeof(phy_info)/sizeof(struct phy_table);
     int id;
-    
+
     lp->active = 0;
     lp->useMII = TRUE;
 
@@ -5094,7 +5094,7 @@ mii_get_phy(struct net_device *dev)
 	lp->phy[lp->active].addr = i;
 	if (i==0) n++;                             /* Count cycles */
 	while (de4x5_reset_phy(dev)<0) udelay(100);/* Wait for reset */
-	id = mii_get_oui(i, DE4X5_MII); 
+	id = mii_get_oui(i, DE4X5_MII);
 	if ((id == 0) || (id == 65535)) continue;  /* Valid ID? */
 	for (j=0; j<limit; j++) {                  /* Search PHY table */
 	    if (id != phy_info[j].id) continue;    /* ID match? */
@@ -5133,7 +5133,7 @@ mii_get_phy(struct net_device *dev)
 	for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++) { /*For each PHY*/
 	    mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII);
 	    while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST);
-	    
+
 	    de4x5_dbg_mii(dev, k);
 	}
     }
@@ -5148,12 +5148,12 @@ build_setup_frame(struct net_device *dev, int mode)
     struct de4x5_private *lp = netdev_priv(dev);
     int i;
     char *pa = lp->setup_frame;
-    
+
     /* Initialise the setup frame */
     if (mode == ALL) {
 	memset(lp->setup_frame, 0, SETUP_FRAME_LEN);
     }
-    
+
     if (lp->setup_f == HASH_PERF) {
 	for (pa=lp->setup_frame+IMPERF_PA_OFFSET, i=0; i<ETH_ALEN; i++) {
 	    *(pa + i) = dev->dev_addr[i];                 /* Host address */
@@ -5170,7 +5170,7 @@ build_setup_frame(struct net_device *dev, int mode)
 	    if (i & 0x01) pa += 4;
 	}
     }
-    
+
     return pa;                     /* Points to the next entry */
 }
 
@@ -5178,7 +5178,7 @@ static void
 enable_ast(struct net_device *dev, u32 time_out)
 {
     timeout(dev, (void *)&de4x5_ast, (u_long)dev, time_out);
-    
+
     return;
 }
 
@@ -5186,9 +5186,9 @@ static void
 disable_ast(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
-    
+
     del_timer(&lp->timer);
-    
+
     return;
 }
 
@@ -5207,10 +5207,10 @@ de4x5_switch_mac_port(struct net_device *dev)
     omr |= lp->infoblock_csr6;
     if (omr & OMR_PS) omr |= OMR_HBD;
     outl(omr, DE4X5_OMR);
-    
+
     /* Soft Reset */
     RESET_DE4X5;
-    
+
     /* Restore the GEP - especially for COMPACT and Type 0 Infoblocks */
     if (lp->chipset == DC21140) {
 	gep_wr(lp->cache.gepc, dev);
@@ -5263,21 +5263,21 @@ timeout(struct net_device *dev, void (*fn)(u_long data), u_long data, u_long mse
 {
     struct de4x5_private *lp = netdev_priv(dev);
     int dt;
-    
+
     /* First, cancel any pending timer events */
     del_timer(&lp->timer);
-    
+
     /* Convert msec to ticks */
     dt = (msec * HZ) / 1000;
     if (dt==0) dt=1;
-    
+
     /* Set up timer */
     init_timer(&lp->timer);
     lp->timer.expires = jiffies + dt;
     lp->timer.function = fn;
     lp->timer.data = data;
     add_timer(&lp->timer);
-    
+
     return;
 }
 
@@ -5375,7 +5375,7 @@ de4x5_dbg_open(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
     int i;
-    
+
     if (de4x5_debug & DEBUG_OPEN) {
 	printk("%s: de4x5 opening with irq %d\n",dev->name,dev->irq);
 	printk("\tphysical address: ");
@@ -5413,11 +5413,11 @@ de4x5_dbg_open(struct net_device *dev)
 	    }
 	}
 	printk("...0x%8.8x\n", le32_to_cpu(lp->tx_ring[i].buf));
-	printk("Ring size: \nRX: %d\nTX: %d\n", 
-	       (short)lp->rxRingSize, 
-	       (short)lp->txRingSize); 
+	printk("Ring size: \nRX: %d\nTX: %d\n",
+	       (short)lp->rxRingSize,
+	       (short)lp->txRingSize);
     }
-    
+
     return;
 }
 
@@ -5426,7 +5426,7 @@ de4x5_dbg_mii(struct net_device *dev, int k)
 {
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
-    
+
     if (de4x5_debug & DEBUG_MII) {
 	printk("\nMII device address: %d\n", lp->phy[k].addr);
 	printk("MII CR:  %x\n",mii_rd(MII_CR,lp->phy[k].addr,DE4X5_MII));
@@ -5445,7 +5445,7 @@ de4x5_dbg_mii(struct net_device *dev, int k)
 	    printk("MII 20:  %x\n",mii_rd(0x14,lp->phy[k].addr,DE4X5_MII));
 	}
     }
-    
+
     return;
 }
 
@@ -5453,17 +5453,17 @@ static void
 de4x5_dbg_media(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
-    
+
     if (lp->media != lp->c_media) {
 	if (de4x5_debug & DEBUG_MEDIA) {
 	    printk("%s: media is %s%s\n", dev->name,
 		   (lp->media == NC  ? "unconnected, link down or incompatible connection" :
 		    (lp->media == TP  ? "TP" :
 		     (lp->media == ANS ? "TP/Nway" :
-		      (lp->media == BNC ? "BNC" : 
-		       (lp->media == AUI ? "AUI" : 
-			(lp->media == BNC_AUI ? "BNC/AUI" : 
-			 (lp->media == EXT_SIA ? "EXT SIA" : 
+		      (lp->media == BNC ? "BNC" :
+		       (lp->media == AUI ? "AUI" :
+			(lp->media == BNC_AUI ? "BNC/AUI" :
+			 (lp->media == EXT_SIA ? "EXT SIA" :
 			  (lp->media == _100Mb  ? "100Mb/s" :
 			   (lp->media == _10Mb   ? "10Mb/s" :
 			    "???"
@@ -5471,7 +5471,7 @@ de4x5_dbg_media(struct net_device *dev)
 	}
 	lp->c_media = lp->media;
     }
-    
+
     return;
 }
 
@@ -5554,7 +5554,7 @@ de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	u32 lval[36];
     } tmp;
     u_long flags = 0;
-    
+
     switch(ioc->cmd) {
     case DE4X5_GET_HWADDR:           /* Get the hardware address */
 	ioc->len = ETH_ALEN;
@@ -5575,7 +5575,7 @@ de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	}
 	build_setup_frame(dev, PHYS_ADDR_ONLY);
 	/* Set up the descriptor and give ownership to the card */
-	load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET | 
+	load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
 		                                       SETUP_FRAME_LEN, (struct sk_buff *)1);
 	lp->tx_new = (++lp->tx_new) % lp->txRingSize;
 	outl(POLL_DEMAND, DE4X5_TPD);                /* Start the TX */
@@ -5617,8 +5617,8 @@ de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	spin_lock_irqsave(&lp->lock, flags);
 	memcpy(&statbuf, &lp->pktStats, ioc->len);
 	spin_unlock_irqrestore(&lp->lock, flags);
-	if (copy_to_user(ioc->data, &statbuf, ioc->len)) 
-		return -EFAULT; 
+	if (copy_to_user(ioc->data, &statbuf, ioc->len))
+		return -EFAULT;
 	break;
     }
     case DE4X5_CLR_STATS:            /* Zero out the driver statistics */
@@ -5652,9 +5652,9 @@ de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	ioc->len = j;
 	if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
 	break;
-	
+
 #define DE4X5_DUMP              0x0f /* Dump the DE4X5 Status */
-/*	
+/*
       case DE4X5_DUMP:
 	j = 0;
 	tmp.addr[j++] = dev->irq;
@@ -5664,7 +5664,7 @@ de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	tmp.addr[j++] = lp->rxRingSize;
 	tmp.lval[j>>2] = (long)lp->rx_ring; j+=4;
 	tmp.lval[j>>2] = (long)lp->tx_ring; j+=4;
-	
+
 	for (i=0;i<lp->rxRingSize-1;i++){
 	    if (i < 3) {
 		tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4;
@@ -5677,7 +5677,7 @@ de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	    }
 	}
 	tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4;
-	
+
 	for (i=0;i<lp->rxRingSize-1;i++){
 	    if (i < 3) {
 		tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4;
@@ -5690,14 +5690,14 @@ de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	    }
 	}
 	tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4;
-	
+
 	for (i=0;i<lp->rxRingSize;i++){
 	    tmp.lval[j>>2] = le32_to_cpu(lp->rx_ring[i].status); j+=4;
 	}
 	for (i=0;i<lp->txRingSize;i++){
 	    tmp.lval[j>>2] = le32_to_cpu(lp->tx_ring[i].status); j+=4;
 	}
-	
+
 	tmp.lval[j>>2] = inl(DE4X5_BMR);  j+=4;
 	tmp.lval[j>>2] = inl(DE4X5_TPD);  j+=4;
 	tmp.lval[j>>2] = inl(DE4X5_RPD);  j+=4;
@@ -5706,18 +5706,18 @@ de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	tmp.lval[j>>2] = inl(DE4X5_STS);  j+=4;
 	tmp.lval[j>>2] = inl(DE4X5_OMR);  j+=4;
 	tmp.lval[j>>2] = inl(DE4X5_IMR);  j+=4;
-	tmp.lval[j>>2] = lp->chipset; j+=4; 
+	tmp.lval[j>>2] = lp->chipset; j+=4;
 	if (lp->chipset == DC21140) {
 	    tmp.lval[j>>2] = gep_rd(dev);  j+=4;
 	} else {
 	    tmp.lval[j>>2] = inl(DE4X5_SISR); j+=4;
 	    tmp.lval[j>>2] = inl(DE4X5_SICR); j+=4;
 	    tmp.lval[j>>2] = inl(DE4X5_STRR); j+=4;
-	    tmp.lval[j>>2] = inl(DE4X5_SIGR); j+=4; 
+	    tmp.lval[j>>2] = inl(DE4X5_SIGR); j+=4;
 	}
-	tmp.lval[j>>2] = lp->phy[lp->active].id; j+=4; 
+	tmp.lval[j>>2] = lp->phy[lp->active].id; j+=4;
 	if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
-	    tmp.lval[j>>2] = lp->active; j+=4; 
+	    tmp.lval[j>>2] = lp->active; j+=4;
 	    tmp.lval[j>>2]=mii_rd(MII_CR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
 	    tmp.lval[j>>2]=mii_rd(MII_SR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
 	    tmp.lval[j>>2]=mii_rd(MII_ID0,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
@@ -5734,10 +5734,10 @@ de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		tmp.lval[j>>2]=mii_rd(0x14,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
 	    }
 	}
-	
+
 	tmp.addr[j++] = lp->txRingSize;
 	tmp.addr[j++] = netif_queue_stopped(dev);
-	
+
 	ioc->len = j;
 	if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
 	break;
@@ -5746,7 +5746,7 @@ de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
     default:
 	return -EOPNOTSUPP;
     }
-    
+
     return status;
 }
 
diff --git a/drivers/net/tulip/de4x5.h b/drivers/net/tulip/de4x5.h
index ad37a4074302..57226e5eb8a6 100644
--- a/drivers/net/tulip/de4x5.h
+++ b/drivers/net/tulip/de4x5.h
@@ -38,11 +38,11 @@
 /*
 ** EISA Register Address Map
 */
-#define EISA_ID      iobase+0x0c80   /* EISA ID Registers */ 
-#define EISA_ID0     iobase+0x0c80   /* EISA ID Register 0 */ 
-#define EISA_ID1     iobase+0x0c81   /* EISA ID Register 1 */ 
-#define EISA_ID2     iobase+0x0c82   /* EISA ID Register 2 */ 
-#define EISA_ID3     iobase+0x0c83   /* EISA ID Register 3 */ 
+#define EISA_ID      iobase+0x0c80   /* EISA ID Registers */
+#define EISA_ID0     iobase+0x0c80   /* EISA ID Register 0 */
+#define EISA_ID1     iobase+0x0c81   /* EISA ID Register 1 */
+#define EISA_ID2     iobase+0x0c82   /* EISA ID Register 2 */
+#define EISA_ID3     iobase+0x0c83   /* EISA ID Register 3 */
 #define EISA_CR      iobase+0x0c84   /* EISA Control Register */
 #define EISA_REG0    iobase+0x0c88   /* EISA Configuration Register 0 */
 #define EISA_REG1    iobase+0x0c89   /* EISA Configuration Register 1 */
@@ -1008,8 +1008,8 @@ struct de4x5_ioctl {
 	unsigned char  __user *data;       /* Pointer to the data buffer */
 };
 
-/* 
-** Recognised commands for the driver 
+/*
+** Recognised commands for the driver
 */
 #define DE4X5_GET_HWADDR	0x01 /* Get the hardware address */
 #define DE4X5_SET_HWADDR	0x02 /* Set the hardware address */
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 74e9075d9c48..ba5b112093f4 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -50,7 +50,7 @@
     forget to unmap PCI mapped skbs.
 
     Alan Cox <alan@redhat.com>
-    Added new PCI identifiers provided by Clear Zhang at ALi 
+    Added new PCI identifiers provided by Clear Zhang at ALi
     for their 1563 ethernet device.
 
     TODO
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index fbd9ab60b052..5ffbd5b300c0 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -96,11 +96,11 @@ static const char *block_name[] __devinitdata = {
  * tulip_build_fake_mediatable - Build a fake mediatable entry.
  * @tp: Ptr to the tulip private data.
  *
- * Some cards like the 3x5 HSC cards (J3514A) do not have a standard 
+ * Some cards like the 3x5 HSC cards (J3514A) do not have a standard
  * srom and can not be handled under the fixup routine.  These cards
- * still need a valid mediatable entry for correct csr12 setup and 
+ * still need a valid mediatable entry for correct csr12 setup and
  * mii handling.
- * 
+ *
  * Since this is currently a parisc-linux specific function, the
  * #ifdef __hppa__ should completely optimize this function away for
  * non-parisc hardware.
@@ -140,7 +140,7 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
 		tp->flags |= HAS_PHY_IRQ;
 		tp->csr12_shadow = -1;
 	}
-#endif 
+#endif
 }
 
 void __devinit tulip_parse_eeprom(struct net_device *dev)
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index bb3558164a5b..da4f7593c50f 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -139,22 +139,22 @@ int tulip_poll(struct net_device *dev, int *budget)
 		}
                /* Acknowledge current RX interrupt sources. */
                iowrite32((RxIntr | RxNoBuf), tp->base_addr + CSR5);
- 
- 
+
+
                /* If we own the next entry, it is a new packet. Send it up. */
                while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
                        s32 status = le32_to_cpu(tp->rx_ring[entry].status);
- 
- 
+
+
                        if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx)
                                break;
- 
+
                        if (tulip_debug > 5)
                                printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n",
                                       dev->name, entry, status);
                        if (--rx_work_limit < 0)
                                goto not_done;
- 
+
                        if ((status & 0x38008300) != 0x0300) {
                                if ((status & 0x38000300) != 0x0300) {
                                 /* Ingore earlier buffers. */
@@ -180,7 +180,7 @@ int tulip_poll(struct net_device *dev, int *budget)
                                /* Omit the four octet CRC from the length. */
                                short pkt_len = ((status >> 16) & 0x7ff) - 4;
                                struct sk_buff *skb;
-  
+
 #ifndef final_version
                                if (pkt_len > 1518) {
                                        printk(KERN_WARNING "%s: Bogus packet size of %d (%#x).\n",
@@ -213,7 +213,7 @@ int tulip_poll(struct net_device *dev, int *budget)
                                } else {        /* Pass up the skb already on the Rx ring. */
                                        char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
                                                             pkt_len);
-  
+
 #ifndef final_version
                                        if (tp->rx_buffers[entry].mapping !=
                                            le32_to_cpu(tp->rx_ring[entry].buffer1)) {
@@ -225,17 +225,17 @@ int tulip_poll(struct net_device *dev, int *budget)
                                                       skb->head, temp);
                                        }
 #endif
-  
+
                                        pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
                                                         PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
-  
+
                                        tp->rx_buffers[entry].skb = NULL;
                                        tp->rx_buffers[entry].mapping = 0;
                                }
                                skb->protocol = eth_type_trans(skb, dev);
-  
+
                                netif_receive_skb(skb);
- 
+
                                dev->last_rx = jiffies;
                                tp->stats.rx_packets++;
                                tp->stats.rx_bytes += pkt_len;
@@ -245,12 +245,12 @@ int tulip_poll(struct net_device *dev, int *budget)
                        entry = (++tp->cur_rx) % RX_RING_SIZE;
                        if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4)
                                tulip_refill_rx(dev);
- 
+
                 }
- 
+
                /* New ack strategy... irq does not ack Rx any longer
                   hopefully this helps */
- 
+
                /* Really bad things can happen here... If new packet arrives
                 * and an irq arrives (tx or just due to occasionally unset
                 * mask), it will be acked by irq handler, but new thread
@@ -259,28 +259,28 @@ int tulip_poll(struct net_device *dev, int *budget)
                 * tomorrow (night 011029). If it will not fail, we won
                 * finally: amount of IO did not increase at all. */
        } while ((ioread32(tp->base_addr + CSR5) & RxIntr));
- 
+
 done:
- 
+
  #ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
-  
+
           /* We use this simplistic scheme for IM. It's proven by
              real life installations. We can have IM enabled
-            continuesly but this would cause unnecessary latency. 
-            Unfortunely we can't use all the NET_RX_* feedback here. 
-            This would turn on IM for devices that is not contributing 
-            to backlog congestion with unnecessary latency. 
-  
+            continuesly but this would cause unnecessary latency.
+            Unfortunely we can't use all the NET_RX_* feedback here.
+            This would turn on IM for devices that is not contributing
+            to backlog congestion with unnecessary latency.
+
              We monitor the the device RX-ring and have:
-  
+
              HW Interrupt Mitigation either ON or OFF.
-  
-            ON:  More then 1 pkt received (per intr.) OR we are dropping 
+
+            ON:  More then 1 pkt received (per intr.) OR we are dropping
              OFF: Only 1 pkt received
-            
+
              Note. We only use min and max (0, 15) settings from mit_table */
-  
-  
+
+
           if( tp->flags &  HAS_INTR_MITIGATION) {
                  if( received > 1 ) {
                          if( ! tp->mit_on ) {
@@ -297,20 +297,20 @@ done:
           }
 
 #endif /* CONFIG_TULIP_NAPI_HW_MITIGATION */
- 
+
          dev->quota -= received;
          *budget -= received;
- 
+
          tulip_refill_rx(dev);
-         
+
          /* If RX ring is not full we are out of memory. */
          if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) goto oom;
- 
+
          /* Remove us from polling list and enable RX intr. */
- 
+
          netif_rx_complete(dev);
          iowrite32(tulip_tbl[tp->chip_id].valid_intrs, tp->base_addr+CSR7);
- 
+
          /* The last op happens after poll completion. Which means the following:
           * 1. it can race with disabling irqs in irq handler
           * 2. it can race with dise/enabling irqs in other poll threads
@@ -321,9 +321,9 @@ done:
           * due to races in masking and due to too late acking of already
           * processed irqs. But it must not result in losing events.
           */
- 
+
          return 0;
- 
+
  not_done:
          if (!received) {
 
@@ -331,29 +331,29 @@ done:
          }
          dev->quota -= received;
          *budget -= received;
- 
+
          if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 ||
              tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
                  tulip_refill_rx(dev);
- 
+
          if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) goto oom;
- 
+
          return 1;
- 
- 
+
+
  oom:    /* Executed with RX ints disabled */
- 
-         
+
+
          /* Start timer, stop polling, but do not enable rx interrupts. */
          mod_timer(&tp->oom_timer, jiffies+1);
-       
+
          /* Think: timer_pending() was an explicit signature of bug.
           * Timer can be pending now but fired and completed
           * before we did netif_rx_complete(). See? We would lose it. */
- 
+
          /* remove ourselves from the polling list */
          netif_rx_complete(dev);
- 
+
          return 0;
 }
 
@@ -521,9 +521,9 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
 	/* Let's see whether the interrupt really is for us */
 	csr5 = ioread32(ioaddr + CSR5);
 
-        if (tp->flags & HAS_PHY_IRQ) 
+        if (tp->flags & HAS_PHY_IRQ)
 	        handled = phy_interrupt (dev);
-    
+
 	if ((csr5 & (NormalIntr|AbnormalIntr)) == 0)
 		return IRQ_RETVAL(handled);
 
@@ -538,17 +538,17 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
 			/* Mask RX intrs and add the device to poll list. */
 			iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ioaddr + CSR7);
 			netif_rx_schedule(dev);
-			
+
 			if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass)))
                                break;
 		}
-		
+
                /* Acknowledge the interrupt sources we handle here ASAP
                   the poll function does Rx and RxNoBuf acking */
-		
+
 		iowrite32(csr5 & 0x0001ff3f, ioaddr + CSR5);
 
-#else 
+#else
 		/* Acknowledge all of the current interrupt sources ASAP. */
 		iowrite32(csr5 & 0x0001ffff, ioaddr + CSR5);
 
@@ -559,11 +559,11 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
 		}
 
 #endif /*  CONFIG_TULIP_NAPI */
-		
+
 		if (tulip_debug > 4)
 			printk(KERN_DEBUG "%s: interrupt  csr5=%#8.8x new csr5=%#8.8x.\n",
 			       dev->name, csr5, ioread32(ioaddr + CSR5));
-		
+
 
 		if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) {
 			unsigned int dirty_tx;
@@ -737,17 +737,17 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
 #ifdef CONFIG_TULIP_NAPI
 		if (rxd)
 			csr5 &= ~RxPollInt;
-	} while ((csr5 & (TxNoBuf | 
-			  TxDied | 
-			  TxIntr | 
+	} while ((csr5 & (TxNoBuf |
+			  TxDied |
+			  TxIntr |
 			  TimerInt |
 			  /* Abnormal intr. */
-			  RxDied | 
-			  TxFIFOUnderflow | 
-			  TxJabber | 
-			  TPLnkFail |  
+			  RxDied |
+			  TxFIFOUnderflow |
+			  TxJabber |
+			  TPLnkFail |
 			  SytemError )) != 0);
-#else 
+#else
 	} while ((csr5 & (NormalIntr|AbnormalIntr)) != 0);
 
 	tulip_refill_rx(dev);
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index f53396fe79c9..e9bc2a958c14 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -140,7 +140,7 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val)
 		spin_unlock_irqrestore(&tp->mii_lock, flags);
 		return;
 	}
-		
+
 	/* Establish sync by sending 32 logic ones. */
 	for (i = 32; i >= 0; i--) {
 		iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 05d2d96f7be2..d25020da6798 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -259,7 +259,7 @@ enum t21143_csr6_bits {
    There are no ill effects from too-large receive rings. */
 
 #define TX_RING_SIZE	32
-#define RX_RING_SIZE	128 
+#define RX_RING_SIZE	128
 #define MEDIA_MASK     31
 
 #define PKT_BUF_SZ		1536	/* Size of each temporary Rx buffer. */
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index c67c91251d04..b3cf11d32e24 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1224,7 +1224,7 @@ out:
  *	Chips that have the MRM/reserved bit quirk and the burst quirk. That
  *	is the DM910X and the on chip ULi devices
  */
- 
+
 static int tulip_uli_dm_quirk(struct pci_dev *pdev)
 {
 	if (pdev->vendor == 0x1282 && pdev->device == 0x9102)
@@ -1297,7 +1297,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	 */
 
 	/* 1. Intel Saturn. Switch to 8 long words burst, 8 long word cache
-	      aligned.  Aries might need this too. The Saturn errata are not 
+	      aligned.  Aries might need this too. The Saturn errata are not
 	      pretty reading but thankfully it's an old 486 chipset.
 
 	   2. The dreaded SiS496 486 chipset. Same workaround as Intel
@@ -1500,7 +1500,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
                }
 #endif
 #ifdef CONFIG_MIPS_COBALT
-               if ((pdev->bus->number == 0) && 
+               if ((pdev->bus->number == 0) &&
                    ((PCI_SLOT(pdev->devfn) == 7) ||
                     (PCI_SLOT(pdev->devfn) == 12))) {
                        /* Cobalt MAC address in first EEPROM locations. */
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 238e9c72cb3a..8b3a28f53c3d 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -9,7 +9,7 @@
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
 
-    
+
 */
 
 #define DRV_NAME	"uli526x"
@@ -185,7 +185,7 @@ struct uli526x_board_info {
 
 	/* NIC SROM data */
 	unsigned char srom[128];
-	u8 init;	
+	u8 init;
 };
 
 enum uli526x_offsets {
@@ -258,7 +258,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
 	struct uli526x_board_info *db;	/* board information structure */
 	struct net_device *dev;
 	int i, err;
-	
+
 	ULI526X_DBUG(0, "uli526x_init_one()", 0);
 
 	if (!printed_version++)
@@ -316,7 +316,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
 		err = -ENOMEM;
 		goto err_out_nomem;
 	}
-	
+
 	db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
 	db->first_tx_desc_dma = db->desc_pool_dma_ptr;
 	db->buf_pool_start = db->buf_pool_ptr;
@@ -324,14 +324,14 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
 
 	db->chip_id = ent->driver_data;
 	db->ioaddr = pci_resource_start(pdev, 0);
-	
+
 	db->pdev = pdev;
 	db->init = 1;
-	
+
 	dev->base_addr = db->ioaddr;
 	dev->irq = pdev->irq;
 	pci_set_drvdata(pdev, dev);
-	
+
 	/* Register some necessary functions */
 	dev->open = &uli526x_open;
 	dev->hard_start_xmit = &uli526x_start_xmit;
@@ -341,7 +341,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
 	dev->ethtool_ops = &netdev_ethtool_ops;
 	spin_lock_init(&db->lock);
 
-		
+
 	/* read 64 word srom data */
 	for (i = 0; i < 64; i++)
 		((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
@@ -374,7 +374,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
 		goto err_out_res;
 
 	printk(KERN_INFO "%s: ULi M%04lx at pci%s,",dev->name,ent->driver_data >> 16,pci_name(pdev));
-	
+
 	for (i = 0; i < 6; i++)
 		printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
 	printk(", irq %d.\n", dev->irq);
@@ -389,7 +389,7 @@ err_out_nomem:
 	if(db->desc_pool_ptr)
 		pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
 			db->desc_pool_ptr, db->desc_pool_dma_ptr);
-			
+
 	if(db->buf_pool_ptr != NULL)
 		pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
 			db->buf_pool_ptr, db->buf_pool_dma_ptr);
@@ -433,7 +433,7 @@ static int uli526x_open(struct net_device *dev)
 {
 	int ret;
 	struct uli526x_board_info *db = netdev_priv(dev);
-	
+
 	ULI526X_DBUG(0, "uli526x_open", 0);
 
 	ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev);
@@ -454,7 +454,7 @@ static int uli526x_open(struct net_device *dev)
 	/* CR6 operation mode decision */
 	db->cr6_data |= ULI526X_TXTH_256;
 	db->cr0_data = CR0_DEFAULT;
-	
+
 	/* Initialize ULI526X board */
 	uli526x_init(dev);
 
@@ -604,7 +604,7 @@ static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Restore CR7 to enable interrupt */
 	spin_unlock_irqrestore(&db->lock, flags);
 	outl(db->cr7_data, dev->base_addr + DCR7);
-	
+
 	/* free this SKB */
 	dev_kfree_skb(skb);
 
@@ -782,7 +782,7 @@ static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info
 	struct sk_buff *skb;
 	int rxlen;
 	u32 rdes0;
-	
+
 	rxptr = db->rx_ready_ptr;
 
 	while(db->rx_avail_cnt) {
@@ -821,7 +821,7 @@ static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info
 			if ( !(rdes0 & 0x8000) ||
 				((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
 				skb = rxptr->rx_skb_ptr;
-		
+
 				/* Good packet, send to upper layer */
 				/* Shorst packet used new SKB */
 				if ( (rxlen < RX_COPY_SIZE) &&
@@ -841,7 +841,7 @@ static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info
 				dev->last_rx = jiffies;
 				db->stats.rx_packets++;
 				db->stats.rx_bytes += rxlen;
-				
+
 			} else {
 				/* Reuse SKB buffer when the packet is error */
 				ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
@@ -911,7 +911,7 @@ ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
 	                   SUPPORTED_100baseT_Full |
 	                   SUPPORTED_Autoneg |
 	                   SUPPORTED_MII);
-		
+
 	ecmd->advertising = (ADVERTISED_10baseT_Half |
 	                   ADVERTISED_10baseT_Full |
 	                   ADVERTISED_100baseT_Half |
@@ -924,13 +924,13 @@ ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
 	ecmd->phy_address = db->phy_addr;
 
 	ecmd->transceiver = XCVR_EXTERNAL;
-		
+
 	ecmd->speed = 10;
 	ecmd->duplex = DUPLEX_HALF;
-	
+
 	if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
 	{
-		ecmd->speed = 100;               
+		ecmd->speed = 100;
 	}
 	if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
 	{
@@ -939,11 +939,11 @@ ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
 	if(db->link_failed)
 	{
 		ecmd->speed = -1;
-		ecmd->duplex = -1;	
+		ecmd->duplex = -1;
 	}
-	
+
 	if (db->media_mode & ULI526X_AUTO)
-	{	
+	{
 		ecmd->autoneg = AUTONEG_ENABLE;
 	}
 }
@@ -964,15 +964,15 @@ static void netdev_get_drvinfo(struct net_device *dev,
 
 static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) {
 	struct uli526x_board_info *np = netdev_priv(dev);
-	
+
 	ULi_ethtool_gset(np, cmd);
-	
+
 	return 0;
 }
 
 static u32 netdev_get_link(struct net_device *dev) {
 	struct uli526x_board_info *np = netdev_priv(dev);
-		
+
 	if(np->link_failed)
 		return 0;
 	else
@@ -1005,11 +1005,11 @@ static void uli526x_timer(unsigned long data)
 	struct uli526x_board_info *db = netdev_priv(dev);
  	unsigned long flags;
 	u8 TmpSpeed=10;
-	
+
 	//ULI526X_DBUG(0, "uli526x_timer()", 0);
 	spin_lock_irqsave(&db->lock, flags);
 
-	
+
 	/* Dynamic reset ULI526X : system error or transmit time-out */
 	tmp_cr8 = inl(db->ioaddr + DCR8);
 	if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
@@ -1021,9 +1021,9 @@ static void uli526x_timer(unsigned long data)
 	/* TX polling kick monitor */
 	if ( db->tx_packet_cnt &&
 	     time_after(jiffies, dev->trans_start + ULI526X_TX_KICK) ) {
-		outl(0x1, dev->base_addr + DCR1);   // Tx polling again 
+		outl(0x1, dev->base_addr + DCR1);   // Tx polling again
 
-		// TX Timeout 
+		// TX Timeout
 		if ( time_after(jiffies, dev->trans_start + ULI526X_TX_TIMEOUT) ) {
 			db->reset_TXtimeout++;
 			db->wait_reset = 1;
@@ -1073,7 +1073,7 @@ static void uli526x_timer(unsigned long data)
 				uli526x_sense_speed(db) )
 				db->link_failed = 1;
 			uli526x_process_mode(db);
-			
+
 			if(db->link_failed==0)
 			{
 				if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
@@ -1404,7 +1404,7 @@ static u8 uli526x_sense_speed(struct uli526x_board_info * db)
 	phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
 
 	if ( (phy_mode & 0x24) == 0x24 ) {
-		
+
 		phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7);
 		if(phy_mode&0x8000)
 			phy_mode = 0x8000;
@@ -1414,7 +1414,7 @@ static u8 uli526x_sense_speed(struct uli526x_board_info * db)
 			phy_mode = 0x2000;
 		else
 			phy_mode = 0x1000;
-		
+
 		/* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
 		switch (phy_mode) {
 		case 0x1000: db->op_mode = ULI526X_10MHF; break;
@@ -1442,7 +1442,7 @@ static u8 uli526x_sense_speed(struct uli526x_board_info * db)
 static void uli526x_set_phyxcer(struct uli526x_board_info *db)
 {
 	u16 phy_reg;
-	
+
 	/* Phyxcer capability setting */
 	phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
 
@@ -1457,7 +1457,7 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
 		case ULI526X_100MHF: phy_reg |= 0x80; break;
 		case ULI526X_100MFD: phy_reg |= 0x100; break;
 		}
-		
+
 	}
 
   	/* Write new capability to Phyxcer Reg4 */
@@ -1556,7 +1556,7 @@ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data
 	/* Write a word data to PHY controller */
 	for ( i = 0x8000; i > 0; i >>= 1)
 		phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
-	
+
 }
 
 
@@ -1574,7 +1574,7 @@ static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
 		return phy_readby_cr10(iobase, phy_addr, offset);
 	/* M5261/M5263 Chip */
 	ioaddr = iobase + DCR9;
-	
+
 	/* Send 33 synchronization clock to Phy controller */
 	for (i = 0; i < 35; i++)
 		phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
@@ -1610,7 +1610,7 @@ static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
 static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
 {
 	unsigned long ioaddr,cr10_value;
-	
+
 	ioaddr = iobase + DCR10;
 	cr10_value = phy_addr;
 	cr10_value = (cr10_value<<5) + offset;
@@ -1629,7 +1629,7 @@ static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
 static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data)
 {
 	unsigned long ioaddr,cr10_value;
-	
+
 	ioaddr = iobase + DCR10;
 	cr10_value = phy_addr;
 	cr10_value = (cr10_value<<5) + offset;
@@ -1659,7 +1659,7 @@ static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id)
 static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
 {
 	u16 phy_data;
-	
+
 	outl(0x50000 , ioaddr);
 	udelay(1);
 	phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 136a70c4d5e4..64ecf929d2ac 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -38,12 +38,12 @@
 			Copyright (C) 2001 Manfred Spraul
   	* ethtool support (jgarzik)
 	* Replace some MII-related magic numbers with constants (jgarzik)
-  
+
 	TODO:
 	* enable pci_power_off
 	* Wake-On-LAN
 */
-  
+
 #define DRV_NAME	"winbond-840"
 #define DRV_VERSION	"1.01-d"
 #define DRV_RELDATE	"Nov-17-2001"
@@ -57,7 +57,7 @@ c-help-name: Winbond W89c840 PCI Ethernet support
 c-help-symbol: CONFIG_WINBOND_840
 c-help: This driver is for the Winbond W89c840 chip.  It also works with
 c-help: the TX9882 chip on the Compex RL100-ATX board.
-c-help: More specific information and updates are available from 
+c-help: More specific information and updates are available from
 c-help: http://www.scyld.com/network/drivers.html
 */
 
@@ -207,7 +207,7 @@ Test with 'ping -s 10000' on a fast computer.
 
 */
 
-
+
 
 /*
   PCI probe table.
@@ -374,7 +374,7 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 static struct ethtool_ops netdev_ethtool_ops;
 static int  netdev_close(struct net_device *dev);
 
-
+
 
 static int __devinit w840_probe1 (struct pci_dev *pdev,
 				  const struct pci_device_id *ent)
@@ -434,7 +434,7 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
 	np->mii_if.mdio_read = mdio_read;
 	np->mii_if.mdio_write = mdio_write;
 	np->base_addr = ioaddr;
-	
+
 	pci_set_drvdata(pdev, dev);
 
 	if (dev->mem_start)
@@ -510,7 +510,7 @@ err_out_netdev:
 	return -ENODEV;
 }
 
-
+
 /* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.  These are
    often serial bit streams generated by the host processor.
    The example below is for the common 93c46 EEPROM, 64 16 bit words. */
@@ -660,7 +660,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int location, int val
 	return;
 }
 
-
+
 static int netdev_open(struct net_device *dev)
 {
 	struct netdev_private *np = netdev_priv(dev);
@@ -731,7 +731,7 @@ static int update_link(struct net_device *dev)
 				dev->name, np->phys[0]);
 		netif_carrier_on(dev);
 	}
-	
+
 	if ((np->mii & ~0xf) == MII_DAVICOM_DM9101) {
 		/* If the link partner doesn't support autonegotiation
 		 * the MII detects it's abilities with the "parallel detection".
@@ -761,7 +761,7 @@ static int update_link(struct net_device *dev)
 		result |= 0x20000000;
 	if (result != np->csr6 && debug)
 		printk(KERN_INFO "%s: Setting %dMBit-%s-duplex based on MII#%d\n",
-				 dev->name, fasteth ? 100 : 10, 
+				 dev->name, fasteth ? 100 : 10,
 			   	duplex ? "full" : "half", np->phys[0]);
 	return result;
 }
@@ -947,7 +947,7 @@ static void init_registers(struct net_device *dev)
 	iowrite32(i, ioaddr + PCIBusCfg);
 
 	np->csr6 = 0;
-	/* 128 byte Tx threshold; 
+	/* 128 byte Tx threshold;
 		Transmit on; Receive on; */
 	update_csr6(dev, 0x00022002 | update_link(dev) | __set_rx_mode(dev));
 
@@ -1584,7 +1584,7 @@ static int netdev_close(struct net_device *dev)
 static void __devexit w840_remove1 (struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
-	
+
 	if (dev) {
 		struct netdev_private *np = netdev_priv(dev);
 		unregister_netdev(dev);
@@ -1640,7 +1640,7 @@ static int w840_suspend (struct pci_dev *pdev, pm_message_t state)
 
 		spin_unlock_wait(&dev->xmit_lock);
 		synchronize_irq(dev->irq);
-	
+
 		np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
 
 		/* no more hardware accesses behind this line. */
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 56344103ac23..63c2175ed138 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -1,11 +1,11 @@
 /*
- * xircom_cb: A driver for the (tulip-like) Xircom Cardbus ethernet cards 
+ * xircom_cb: A driver for the (tulip-like) Xircom Cardbus ethernet cards
  *
  * This software is (C) by the respective authors, and licensed under the GPL
  * License.
  *
  * Written by Arjan van de Ven for Red Hat, Inc.
- * Based on work by Jeff Garzik, Doug Ledford and Donald Becker 
+ * Based on work by Jeff Garzik, Doug Ledford and Donald Becker
  *
  *  	This software may be used and distributed according to the terms
  *      of the GNU General Public License, incorporated herein by reference.
@@ -93,7 +93,7 @@ struct xircom_private {
 
 	unsigned long io_port;
 	int open;
-	
+
 	/* transmit_used is the rotating counter that indicates which transmit
 	   descriptor has to be used next */
 	int transmit_used;
@@ -153,10 +153,10 @@ static struct pci_device_id xircom_pci_table[] = {
 MODULE_DEVICE_TABLE(pci, xircom_pci_table);
 
 static struct pci_driver xircom_ops = {
-	.name		= "xircom_cb", 
-	.id_table	= xircom_pci_table, 
-	.probe		= xircom_probe, 
-	.remove		= xircom_remove, 
+	.name		= "xircom_cb",
+	.id_table	= xircom_pci_table,
+	.probe		= xircom_probe,
+	.remove		= xircom_remove,
 	.suspend =NULL,
 	.resume =NULL
 };
@@ -174,7 +174,7 @@ static void print_binary(unsigned int number)
 			buffer[i2++]='1';
 		else
 			buffer[i2++]='0';
-		if ((i&3)==0) 
+		if ((i&3)==0)
 			buffer[i2++]=' ';
 	}
 	printk("%s\n",buffer);
@@ -196,10 +196,10 @@ static struct ethtool_ops netdev_ethtool_ops = {
 
 /* xircom_probe is the code that gets called on device insertion.
    it sets up the hardware and registers the device to the networklayer.
-   
+
    TODO: Send 1 or 2 "dummy" packets here as the card seems to discard the
          first two packets that get send, and pump hates that.
-         
+
  */
 static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
@@ -209,7 +209,7 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 	unsigned long flags;
 	unsigned short tmp16;
 	enter("xircom_probe");
-	
+
 	/* First do the PCI initialisation */
 
 	if (pci_enable_device(pdev))
@@ -217,24 +217,24 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 
 	/* disable all powermanagement */
 	pci_write_config_dword(pdev, PCI_POWERMGMT, 0x0000);
-	
+
 	pci_set_master(pdev); /* Why isn't this done by pci_enable_device ?*/
 
-	/* clear PCI status, if any */ 
-	pci_read_config_word (pdev,PCI_STATUS, &tmp16); 
+	/* clear PCI status, if any */
+	pci_read_config_word (pdev,PCI_STATUS, &tmp16);
 	pci_write_config_word (pdev, PCI_STATUS,tmp16);
-	
+
 	pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
-	
+
 	if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
 		printk(KERN_ERR "xircom_probe: failed to allocate io-region\n");
 		return -ENODEV;
 	}
 
-	/* 
+	/*
 	   Before changing the hardware, allocate the memory.
 	   This way, we can fail gracefully if not enough memory
-	   is available. 
+	   is available.
 	 */
 	dev = alloc_etherdev(sizeof(struct xircom_private));
 	if (!dev) {
@@ -242,13 +242,13 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 		goto device_fail;
 	}
 	private = netdev_priv(dev);
-	
+
 	/* Allocate the send/receive buffers */
 	private->rx_buffer = pci_alloc_consistent(pdev,8192,&private->rx_dma_handle);
 	if (private->rx_buffer == NULL) {
  		printk(KERN_ERR "xircom_probe: no memory for rx buffer \n");
 		goto rx_buf_fail;
-	}	
+	}
 	private->tx_buffer = pci_alloc_consistent(pdev,8192,&private->tx_dma_handle);
 	if (private->tx_buffer == NULL) {
 		printk(KERN_ERR "xircom_probe: no memory for tx buffer \n");
@@ -265,11 +265,11 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 	spin_lock_init(&private->lock);
 	dev->irq = pdev->irq;
 	dev->base_addr = private->io_port;
-	
+
 	initialize_card(private);
 	read_mac_address(private);
 	setup_descriptors(private);
-	
+
 	dev->open = &xircom_open;
 	dev->hard_start_xmit = &xircom_start_xmit;
 	dev->stop = &xircom_close;
@@ -285,19 +285,19 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 		printk(KERN_ERR "xircom_probe: netdevice registration failed.\n");
 		goto reg_fail;
 	}
-		
+
 	printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, chip_rev, pdev->irq);
 	/* start the transmitter to get a heartbeat */
 	/* TODO: send 2 dummy packets here */
 	transceiver_voodoo(private);
-	
+
 	spin_lock_irqsave(&private->lock,flags);
 	activate_transmitter(private);
 	activate_receiver(private);
 	spin_unlock_irqrestore(&private->lock,flags);
-	
+
 	trigger_receive(private);
-	
+
 	leave("xircom_probe");
 	return 0;
 
@@ -332,7 +332,7 @@ static void __devexit xircom_remove(struct pci_dev *pdev)
 	free_netdev(dev);
 	pci_set_drvdata(pdev, NULL);
 	leave("xircom_remove");
-} 
+}
 
 static irqreturn_t xircom_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
 {
@@ -346,11 +346,11 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance, struct pt_regs
 	spin_lock(&card->lock);
 	status = inl(card->io_port+CSR5);
 
-#ifdef DEBUG	
+#ifdef DEBUG
 	print_binary(status);
 	printk("tx status 0x%08x 0x%08x \n",card->tx_buffer[0],card->tx_buffer[4]);
 	printk("rx status 0x%08x 0x%08x \n",card->rx_buffer[0],card->rx_buffer[4]);
-#endif	
+#endif
 	/* Handle shared irq and hotplug */
 	if (status == 0 || status == 0xffffffff) {
 		spin_unlock(&card->lock);
@@ -366,21 +366,21 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance, struct pt_regs
 			netif_carrier_on(dev);
 		else
 			netif_carrier_off(dev);
-		
+
 	}
 
-	/* Clear all remaining interrupts */	
+	/* Clear all remaining interrupts */
 	status |= 0xffffffff; /* FIXME: make this clear only the
 				        real existing bits */
 	outl(status,card->io_port+CSR5);
-	
 
-	for (i=0;i<NUMDESCRIPTORS;i++) 
+
+	for (i=0;i<NUMDESCRIPTORS;i++)
 		investigate_write_descriptor(dev,card,i,bufferoffsets[i]);
-	for (i=0;i<NUMDESCRIPTORS;i++) 
+	for (i=0;i<NUMDESCRIPTORS;i++)
 		investigate_read_descriptor(dev,card,i,bufferoffsets[i]);
 
-	
+
 	spin_unlock(&card->lock);
 	leave("xircom_interrupt");
 	return IRQ_HANDLED;
@@ -393,38 +393,38 @@ static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int nextdescriptor;
 	int desc;
 	enter("xircom_start_xmit");
-	
+
 	card = netdev_priv(dev);
 	spin_lock_irqsave(&card->lock,flags);
-	
+
 	/* First see if we can free some descriptors */
-	for (desc=0;desc<NUMDESCRIPTORS;desc++) 
+	for (desc=0;desc<NUMDESCRIPTORS;desc++)
 		investigate_write_descriptor(dev,card,desc,bufferoffsets[desc]);
-	
-	
+
+
 	nextdescriptor = (card->transmit_used +1) % (NUMDESCRIPTORS);
 	desc = card->transmit_used;
-	
+
 	/* only send the packet if the descriptor is free */
 	if (card->tx_buffer[4*desc]==0) {
 			/* Copy the packet data; zero the memory first as the card
 			   sometimes sends more than you ask it to. */
-			
+
 			memset(&card->tx_buffer[bufferoffsets[desc]/4],0,1536);
 			memcpy(&(card->tx_buffer[bufferoffsets[desc]/4]),skb->data,skb->len);
-	
-	
+
+
 			/* FIXME: The specification tells us that the length we send HAS to be a multiple of
 			   4 bytes. */
-			   
+
 			card->tx_buffer[4*desc+1] = skb->len;
 			if (desc == NUMDESCRIPTORS-1)
 				card->tx_buffer[4*desc+1] |= (1<<25);  /* bit 25: last descriptor of the ring */
 
 			card->tx_buffer[4*desc+1] |= 0xF0000000;
-						 /* 0xF0... means want interrupts*/ 
+						 /* 0xF0... means want interrupts*/
 			card->tx_skb[desc] = skb;
-			
+
 			wmb();
 			/* This gives the descriptor to the card */
 			card->tx_buffer[4*desc] = 0x80000000;
@@ -433,18 +433,18 @@ static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev)
 				netif_stop_queue(dev);
 			}
 			card->transmit_used = nextdescriptor;
-			leave("xircom-start_xmit - sent");	
+			leave("xircom-start_xmit - sent");
 			spin_unlock_irqrestore(&card->lock,flags);
 			return 0;
 	}
-	
+
 
 
 	/* Uh oh... no free descriptor... drop the packet */
 	netif_stop_queue(dev);
 	spin_unlock_irqrestore(&card->lock,flags);
 	trigger_transmit(card);
-	
+
 	return -EIO;
 }
 
@@ -462,7 +462,7 @@ static int xircom_open(struct net_device *dev)
 		leave("xircom_open - No IRQ");
 		return retval;
 	}
-	
+
 	xircom_up(xp);
 	xp->open = 1;
 	leave("xircom_open");
@@ -473,31 +473,31 @@ static int xircom_close(struct net_device *dev)
 {
 	struct xircom_private *card;
 	unsigned long flags;
-	
+
 	enter("xircom_close");
 	card = netdev_priv(dev);
 	netif_stop_queue(dev); /* we don't want new packets */
 
-	
+
 	spin_lock_irqsave(&card->lock,flags);
-	
+
 	disable_all_interrupts(card);
-#if 0	
+#if 0
 	/* We can enable this again once we send dummy packets on ifconfig ethX up */
 	deactivate_receiver(card);
 	deactivate_transmitter(card);
-#endif	
+#endif
 	remove_descriptors(card);
-	
+
 	spin_unlock_irqrestore(&card->lock,flags);
-	
+
 	card->open = 0;
 	free_irq(dev->irq,dev);
-	
+
 	leave("xircom_close");
-	
+
 	return 0;
-	
+
 }
 
 
@@ -506,8 +506,8 @@ static struct net_device_stats *xircom_get_stats(struct net_device *dev)
 {
         struct xircom_private *card = netdev_priv(dev);
         return &card->stats;
-} 
-                                                 
+}
+
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void xircom_poll_controller(struct net_device *dev)
@@ -540,7 +540,7 @@ static void initialize_card(struct xircom_private *card)
 	outl(val, card->io_port + CSR0);
 
 
-	val = 0;		/* Value 0x00 is a safe and conservative value 
+	val = 0;		/* Value 0x00 is a safe and conservative value
 				   for the PCI configuration settings */
 	outl(val, card->io_port + CSR0);
 
@@ -617,23 +617,23 @@ static void setup_descriptors(struct xircom_private *card)
 
 		/* Rx Descr2: address of the buffer
 		   we store the buffer at the 2nd half of the page */
-	
+
 		address = (unsigned long) card->rx_dma_handle;
 		card->rx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]);
 		/* Rx Desc3: address of 2nd buffer -> 0 */
 		card->rx_buffer[i*4 + 3] = 0;
 	}
-	
+
 	wmb();
 	/* Write the receive descriptor ring address to the card */
 	address = (unsigned long) card->rx_dma_handle;
-	val = cpu_to_le32(address); 
+	val = cpu_to_le32(address);
 	outl(val, card->io_port + CSR3);	/* Receive descr list address */
 
 
 	/* transmit descriptors */
 	memset(card->tx_buffer, 0, 128);	/* clear the descriptors */
-	
+
 	for (i=0;i<NUMDESCRIPTORS;i++ ) {
 		/* Tx Descr0: Empty, we own it, no errors -> 0x00000000 */
 		card->tx_buffer[i*4 + 0] = 0x00000000;
@@ -641,7 +641,7 @@ static void setup_descriptors(struct xircom_private *card)
 		card->tx_buffer[i*4 + 1] = 1536;
 		if (i==NUMDESCRIPTORS-1)
 			card->tx_buffer[i*4 + 1] |= (1 << 25); /* bit 25 is "last descriptor" */
-		
+
 		/* Tx Descr2: address of the buffer
 		   we store the buffer at the 2nd half of the page */
 		address = (unsigned long) card->tx_dma_handle;
@@ -748,7 +748,7 @@ static int receive_active(struct xircom_private *card)
 activate_receiver enables the receiver on the card.
 Before being allowed to active the receiver, the receiver
 must be completely de-activated. To achieve this,
-this code actually disables the receiver first; then it waits for the 
+this code actually disables the receiver first; then it waits for the
 receiver to become inactive, then it activates the receiver and then
 it waits for the receiver to be active.
 
@@ -762,13 +762,13 @@ static void activate_receiver(struct xircom_private *card)
 
 
 	val = inl(card->io_port + CSR6);	/* Operation mode */
-	
+
 	/* If the "active" bit is set and the receiver is already
 	   active, no need to do the expensive thing */
 	if ((val&2) && (receive_active(card)))
 		return;
-	
-	
+
+
 	val = val & ~2;		/* disable the receiver */
 	outl(val, card->io_port + CSR6);
 
@@ -805,7 +805,7 @@ static void activate_receiver(struct xircom_private *card)
 
 /*
 deactivate_receiver disables the receiver on the card.
-To achieve this this code disables the receiver first; 
+To achieve this this code disables the receiver first;
 then it waits for the receiver to become inactive.
 
 must be called with the lock held and interrupts disabled.
@@ -840,7 +840,7 @@ static void deactivate_receiver(struct xircom_private *card)
 activate_transmitter enables the transmitter on the card.
 Before being allowed to active the transmitter, the transmitter
 must be completely de-activated. To achieve this,
-this code actually disables the transmitter first; then it waits for the 
+this code actually disables the transmitter first; then it waits for the
 transmitter to become inactive, then it activates the transmitter and then
 it waits for the transmitter to be active again.
 
@@ -856,7 +856,7 @@ static void activate_transmitter(struct xircom_private *card)
 	val = inl(card->io_port + CSR6);	/* Operation mode */
 
 	/* If the "active" bit is set and the receiver is already
-	   active, no need to do the expensive thing */	 
+	   active, no need to do the expensive thing */
 	if ((val&(1<<13)) && (transmit_active(card)))
 		return;
 
@@ -896,7 +896,7 @@ static void activate_transmitter(struct xircom_private *card)
 
 /*
 deactivate_transmitter disables the transmitter on the card.
-To achieve this this code disables the transmitter first; 
+To achieve this this code disables the transmitter first;
 then it waits for the transmitter to become inactive.
 
 must be called with the lock held and interrupts disabled.
@@ -990,7 +990,7 @@ static void disable_all_interrupts(struct xircom_private *card)
 {
 	unsigned int val;
 	enter("enable_all_interrupts");
-	
+
 	val = 0;				/* disable all interrupts */
 	outl(val, card->io_port + CSR7);
 
@@ -1031,8 +1031,8 @@ static int enable_promisc(struct xircom_private *card)
 	unsigned int val;
 	enter("enable_promisc");
 
-	val = inl(card->io_port + CSR6);	
-	val = val | (1 << 6);	
+	val = inl(card->io_port + CSR6);
+	val = val | (1 << 6);
 	outl(val, card->io_port + CSR6);
 
 	leave("enable_promisc");
@@ -1042,7 +1042,7 @@ static int enable_promisc(struct xircom_private *card)
 
 
 
-/* 
+/*
 link_status() checks the the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what.
 
 Must be called in locked state with interrupts disabled
@@ -1051,15 +1051,15 @@ static int link_status(struct xircom_private *card)
 {
 	unsigned int val;
 	enter("link_status");
-	
+
 	val = inb(card->io_port + CSR12);
-	
+
 	if (!(val&(1<<2)))  /* bit 2 is 0 for 10mbit link, 1 for not an 10mbit link */
 		return 10;
 	if (!(val&(1<<1)))  /* bit 1 is 0 for 100mbit link, 1 for not an 100mbit link */
 		return 100;
-		
-	/* If we get here -> no link at all */	
+
+	/* If we get here -> no link at all */
 
 	leave("link_status");
 	return 0;
@@ -1071,7 +1071,7 @@ static int link_status(struct xircom_private *card)
 
 /*
   read_mac_address() reads the MAC address from the NIC and stores it in the "dev" structure.
- 
+
   This function will take the spinlock itself and can, as a result, not be called with the lock helt.
  */
 static void read_mac_address(struct xircom_private *card)
@@ -1081,7 +1081,7 @@ static void read_mac_address(struct xircom_private *card)
 	int i;
 
 	enter("read_mac_address");
-		
+
 	spin_lock_irqsave(&card->lock, flags);
 
 	outl(1 << 12, card->io_port + CSR9);	/* enable boot rom access */
@@ -1095,7 +1095,7 @@ static void read_mac_address(struct xircom_private *card)
 		outl(i + 3, card->io_port + CSR10);
 		data_count = inl(card->io_port + CSR9) & 0xff;
 		if ((tuple == 0x22) && (data_id == 0x04) && (data_count == 0x06)) {
-			/* 
+			/*
 			 * This is it.  We have the data we want.
 			 */
 			for (j = 0; j < 6; j++) {
@@ -1136,12 +1136,12 @@ static void transceiver_voodoo(struct xircom_private *card)
 	spin_lock_irqsave(&card->lock, flags);
 
 	outl(0x0008, card->io_port + CSR15);
-        udelay(25);  
+        udelay(25);
         outl(0xa8050000, card->io_port + CSR15);
         udelay(25);
         outl(0xa00f0000, card->io_port + CSR15);
         udelay(25);
-        
+
         spin_unlock_irqrestore(&card->lock, flags);
 
 	netif_start_queue(card->dev);
@@ -1163,15 +1163,15 @@ static void xircom_up(struct xircom_private *card)
 
 	spin_lock_irqsave(&card->lock, flags);
 
-	
+
 	enable_link_interrupt(card);
 	enable_transmit_interrupt(card);
 	enable_receive_interrupt(card);
 	enable_common_interrupts(card);
 	enable_promisc(card);
-	
+
 	/* The card can have received packets already, read them away now */
-	for (i=0;i<NUMDESCRIPTORS;i++) 
+	for (i=0;i<NUMDESCRIPTORS;i++)
 		investigate_read_descriptor(card->dev,card,i,bufferoffsets[i]);
 
 
@@ -1185,15 +1185,15 @@ static void xircom_up(struct xircom_private *card)
 /* Bufferoffset is in BYTES */
 static void investigate_read_descriptor(struct net_device *dev,struct xircom_private *card, int descnr, unsigned int bufferoffset)
 {
-		int status;		
-		
+		int status;
+
 		enter("investigate_read_descriptor");
 		status = card->rx_buffer[4*descnr];
-		
+
 		if ((status > 0)) {	/* packet received */
-		
+
 			/* TODO: discard error packets */
-			
+
 			short pkt_len = ((status >> 16) & 0x7ff) - 4;	/* minus 4, we don't want the CRC */
 			struct sk_buff *skb;
 
@@ -1216,7 +1216,7 @@ static void investigate_read_descriptor(struct net_device *dev,struct xircom_pri
 			dev->last_rx = jiffies;
 			card->stats.rx_packets++;
 			card->stats.rx_bytes += pkt_len;
-			
+
 		      out:
 			/* give the buffer back to the card */
 			card->rx_buffer[4*descnr] =  0x80000000;
@@ -1234,9 +1234,9 @@ static void investigate_write_descriptor(struct net_device *dev, struct xircom_p
 		int status;
 
 		enter("investigate_write_descriptor");
-		
+
 		status = card->tx_buffer[4*descnr];
-#if 0		
+#if 0
 		if (status & 0x8000) {	/* Major error */
 			printk(KERN_ERR "Major transmit error status %x \n", status);
 			card->tx_buffer[4*descnr] = 0;
@@ -1258,7 +1258,7 @@ static void investigate_write_descriptor(struct net_device *dev, struct xircom_p
 		}
 
 		leave("investigate_write_descriptor");
-		
+
 }
 
 
@@ -1271,8 +1271,8 @@ static int __init xircom_init(void)
 static void __exit xircom_exit(void)
 {
 	pci_unregister_driver(&xircom_ops);
-} 
+}
 
-module_init(xircom_init) 
+module_init(xircom_init)
 module_exit(xircom_exit)