ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs

Instead of hardcoding 0 and 1 to indicate SPI and PPI GIC interrupts,
use the definitions of <dt-bindings/interrupt-controller/arm-gic.h> to
clarify the Device Tree code.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

4 files changed, 55 insertions, 53 deletions

diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index c89fee488319..23d497f3f3bc 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -12,6 +12,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
@@ -129,7 +130,7 @@
 			timer@c600 {
 				compatible = "arm,cortex-a9-twd-timer";
 				reg = <0xc600 0x20>;
-				interrupts = <1 13 0x301>;
+				interrupts = <GIC_PPI 13 0x301>;
 				clocks = <&coreclk 2>;
 			};
 
@@ -148,7 +149,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				cell-index = <0>;
-				interrupts = <0 1 0x4>;
+				interrupts = <GIC_SPI 1 0x4>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -159,7 +160,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				cell-index = <1>;
-				interrupts = <0 63 0x4>;
+				interrupts = <GIC_SPI 63 0x4>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -169,7 +170,7 @@
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interrupts = <0 2 0x4>;
+				interrupts = <GIC_SPI 2 0x4>;
 				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
@@ -180,7 +181,7 @@
 				reg = <0x11100 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interrupts = <0 3 0x4>;
+				interrupts = <GIC_SPI 3 0x4>;
 				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
@@ -190,7 +191,7 @@
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
-				interrupts = <0 12 4>;
+				interrupts = <GIC_SPI 12 4>;
 				reg-io-width = <1>;
 				status = "disabled";
 			};
@@ -199,7 +200,7 @@
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
-				interrupts = <0 13 4>;
+				interrupts = <GIC_SPI 13 4>;
 				reg-io-width = <1>;
 				status = "disabled";
 			};
@@ -248,8 +249,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
-				interrupts = <0 53 0x4>, <0 54 0x4>,
-					     <0 55 0x4>, <0 56 0x4>;
+				interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>,
+					     <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>;
 			};
 
 			gpio1: gpio@18140 {
@@ -260,8 +261,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
-				interrupts = <0 58 0x4>, <0 59 0x4>,
-					     <0 60 0x4>, <0 61 0x4>;
+				interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>,
+					     <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>;
 			};
 
 			gpio2: gpio@18180 {
@@ -272,7 +273,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
-				interrupts = <0 62 0x4>;
+				interrupts = <GIC_SPI 62 0x4>;
 			};
 
 			system-controller@18200 {
@@ -299,16 +300,16 @@
 				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
-				interrupts = <1 15 0x4>;
+				interrupts = <GIC_PPI 15 0x4>;
 			};
 
 			timer@20300 {
 				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
 				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts-extended = <&gic  0  8 4>,
-						      <&gic  0  9 4>,
-						      <&gic  0 10 4>,
-						      <&gic  0 11 4>,
+				interrupts-extended = <&gic  GIC_SPI  8 4>,
+						      <&gic  GIC_SPI  9 4>,
+						      <&gic  GIC_SPI 10 4>,
+						      <&gic  GIC_SPI 11 4>,
 						      <&mpic 5>,
 						      <&mpic 6>;
 				clocks = <&coreclk 0>;
@@ -322,12 +323,12 @@
 				status = "okay";
 
 				xor00 {
-					interrupts = <0 22 0x4>;
+					interrupts = <GIC_SPI 22 0x4>;
 					dmacap,memcpy;
 					dmacap,xor;
 				};
 				xor01 {
-					interrupts = <0 23 0x4>;
+					interrupts = <GIC_SPI 23 0x4>;
 					dmacap,memcpy;
 					dmacap,xor;
 					dmacap,memset;
@@ -342,12 +343,12 @@
 				status = "okay";
 
 				xor10 {
-					interrupts = <0 65 0x4>;
+					interrupts = <GIC_SPI 65 0x4>;
 					dmacap,memcpy;
 					dmacap,xor;
 				};
 				xor11 {
-					interrupts = <0 66 0x4>;
+					interrupts = <GIC_SPI 66 0x4>;
 					dmacap,memcpy;
 					dmacap,xor;
 					dmacap,memset;
@@ -357,7 +358,7 @@
 			sata@a0000 {
 				compatible = "marvell,orion-sata";
 				reg = <0xa0000 0x5000>;
-				interrupts = <0 26 0x4>;
+				interrupts = <GIC_SPI 26 0x4>;
 				clocks = <&gateclk 14>, <&gateclk 20>;
 				clock-names = "0", "1";
 				status = "disabled";
@@ -368,7 +369,7 @@
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
 				#size-cells = <1>;
-				interrupts = <0 84 0x4>;
+				interrupts = <GIC_SPI 84 0x4>;
 				clocks = <&gateclk 11>;
 				status = "disabled";
 			};
@@ -376,7 +377,7 @@
 			mvsdio@d4000 {
 				compatible = "marvell,orion-sdio";
 				reg = <0xd4000 0x200>;
-				interrupts = <0 25 0x4>;
+				interrupts = <GIC_SPI 25 0x4>;
 				clocks = <&gateclk 17>;
 				bus-width = <4>;
 				cap-sdio-irq;
@@ -429,7 +430,7 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic 0 29 0x4>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
@@ -446,7 +447,7 @@
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic 0 33 0x4>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index 82b33473a146..678ba3d0c485 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -70,7 +70,7 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic 0 29 0x4>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
@@ -88,7 +88,7 @@
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic 0 33 0x4>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
@@ -106,7 +106,7 @@
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic 0 70 0x4>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index b22f5f1bd337..055bc2f1c051 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -81,7 +81,7 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic 0 29 0x4>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
@@ -99,7 +99,7 @@
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic 0 33 0x4>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
@@ -117,7 +117,7 @@
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic 0 70 0x4>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
@@ -138,7 +138,7 @@
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic 0 71 0x4>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 0x4>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 7>;
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 5a10248f4bb9..502d21ae7b61 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -13,6 +13,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
@@ -109,7 +110,7 @@
 			timer@c600 {
 				compatible = "arm,cortex-a9-twd-timer";
 				reg = <0xc600 0x20>;
-				interrupts = <1 13 0x301>;
+				interrupts = <GIC_PPI 13 0x301>;
 				clocks = <&coreclk 2>;
 			};
 
@@ -128,7 +129,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				cell-index = <0>;
-				interrupts = <0 1 0x4>;
+				interrupts = <GIC_SPI 1 0x4>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -139,7 +140,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				cell-index = <1>;
-				interrupts = <0 63 0x4>;
+				interrupts = <GIC_SPI 63 0x4>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -149,7 +150,7 @@
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interrupts = <0 2 0x4>;
+				interrupts = <GIC_SPI 2 0x4>;
 				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
@@ -160,7 +161,7 @@
 				reg = <0x11100 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interrupts = <0 3 0x4>;
+				interrupts = <GIC_SPI 3 0x4>;
 				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
@@ -170,7 +171,7 @@
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
-				interrupts = <0 12 4>;
+				interrupts = <GIC_SPI 12 4>;
 				reg-io-width = <1>;
 				status = "disabled";
 			};
@@ -179,7 +180,7 @@
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
-				interrupts = <0 13 4>;
+				interrupts = <GIC_SPI 13 4>;
 				reg-io-width = <1>;
 				status = "disabled";
 			};
@@ -197,8 +198,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
-				interrupts = <0 53 0x4>, <0 54 0x4>,
-					     <0 55 0x4>, <0 56 0x4>;
+				interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>,
+					     <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>;
 			};
 
 			gpio1: gpio@18140 {
@@ -209,8 +210,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
-				interrupts = <0 58 0x4>, <0 59 0x4>,
-					     <0 60 0x4>, <0 61 0x4>;
+				interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>,
+					     <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>;
 			};
 
 			system-controller@18200 {
@@ -244,17 +245,17 @@
 				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
-				interrupts = <1 15 0x4>;
+				interrupts = <GIC_PPI 15 0x4>;
 			};
 
 			timer@20300 {
 				compatible = "marvell,armada-380-timer",
 					     "marvell,armada-xp-timer";
 				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts-extended = <&gic  0  8 4>,
-						      <&gic  0  9 4>,
-						      <&gic  0 10 4>,
-						      <&gic  0 11 4>,
+				interrupts-extended = <&gic  GIC_SPI  8 4>,
+						      <&gic  GIC_SPI  9 4>,
+						      <&gic  GIC_SPI 10 4>,
+						      <&gic  GIC_SPI 11 4>,
 						      <&mpic 5>,
 						      <&mpic 6>;
 				clocks = <&coreclk 2>, <&refclk>;
@@ -285,12 +286,12 @@
 				status = "okay";
 
 				xor00 {
-					interrupts = <0 22 0x4>;
+					interrupts = <GIC_SPI 22 0x4>;
 					dmacap,memcpy;
 					dmacap,xor;
 				};
 				xor01 {
-					interrupts = <0 23 0x4>;
+					interrupts = <GIC_SPI 23 0x4>;
 					dmacap,memcpy;
 					dmacap,xor;
 					dmacap,memset;
@@ -305,12 +306,12 @@
 				status = "okay";
 
 				xor10 {
-					interrupts = <0 65 0x4>;
+					interrupts = <GIC_SPI 65 0x4>;
 					dmacap,memcpy;
 					dmacap,xor;
 				};
 				xor11 {
-					interrupts = <0 66 0x4>;
+					interrupts = <GIC_SPI 66 0x4>;
 					dmacap,memcpy;
 					dmacap,xor;
 					dmacap,memset;