diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-04 14:02:09 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-04 14:02:09 -0700 |
| commit | 98f486f18d16e2214728d101ed8b6a12dce75539 (patch) | |
| tree | 987e2fcbd6089a94a00e489cd62fec1b8b10cd02 | |
| parent | 84cbd7222b2b00dcddef3103203986b3d59c836a (diff) | |
| parent | 97191d734f6ac028e5e6dcd574378c1544a16c0b (diff) | |
| download | blackbird-op-linux-98f486f18d16e2214728d101ed8b6a12dce75539.tar.gz blackbird-op-linux-98f486f18d16e2214728d101ed8b6a12dce75539.zip | |
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- new drivers: Kontron PLD, Wondermedia VT
- mv64xxx driver gained sun4i support and a bigger cleanup
- duplicate driver 'intel-mid' removed
- added generic device tree binding for sda holding time (and
designware driver already uses it)
- we tried to allow driver probing with only device tree and no i2c
ids, but I had to revert it because of side effects. Needs some
rethinking.
- driver bugfixes, cleanups...
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
i2c-designware: use div_u64 to fix link
i2c: Kontron PLD i2c bus driver
i2c: iop3xxx: fix build failure after waitqueue changes
i2c-designware: make SDA hold time configurable
i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided
i2c: imx: allow autoloading on dt ids
i2c: mv64xxx: Fix transfer error code
i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs
i2c: omap: correct usage of the interrupt enable register
i2c-pxa: prepare clock before use
Revert "i2c: core: make it possible to match a pure device tree driver"
i2c: nomadik: allocate adapter number dynamically
i2c: nomadik: support elder Nomadiks
i2c: mv64xxx: Add Allwinner sun4i compatible
i2c: mv64xxx: make the registers offset configurable
i2c: mv64xxx: Add macros to access parts of registers
i2c: vt8500: Add support for I2C bus on Wondermedia SoCs
i2c: designware: fix race between subsequent xfers
i2c: bfin-twi: Read and write the FIFO in loop
i2c: core: make it possible to match a pure device tree driver
...
29 files changed, 1268 insertions, 1398 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt index e42a2ee233e6..7fd7fa25e9b0 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt @@ -10,6 +10,10 @@ Recommended properties : - clock-frequency : desired I2C bus clock frequency in Hz. +Optional properties : + - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds. + This option is only supported in hardware blocks version 1.11a or newer. + Example : i2c@f0000 { @@ -20,3 +24,14 @@ Example : interrupts = <11>; clock-frequency = <400000>; }; + + i2c@1120000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x1120000 0x1000>; + interrupt-parent = <&ictl>; + interrupts = <12 1>; + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <300>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt index f46d928aa73d..a1ee681942cc 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt @@ -6,7 +6,11 @@ Required properties : - reg : Offset and length of the register set for the device - compatible : Should be "marvell,mv64xxx-i2c" - interrupts : The interrupt number - - clock-frequency : Desired I2C bus clock frequency in Hz. + +Optional properties : + + - clock-frequency : Desired I2C bus clock frequency in Hz. If not set the +default frequency is 100kHz Examples: diff --git a/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt b/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt new file mode 100644 index 000000000000..94a425eaa6c7 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt @@ -0,0 +1,24 @@ +* Wondermedia I2C Controller + +Required properties : + + - compatible : should be "wm,wm8505-i2c" + - reg : Offset and length of the register set for the device + - interrupts : <IRQ> where IRQ is the interrupt number + - clocks : phandle to the I2C clock source + +Optional properties : + + - clock-frequency : desired I2C bus clock frequency in Hz. + Valid values are 100000 and 400000. + Default to 100000 if not specified, or invalid value. + +Example : + + i2c_0: i2c@d8280000 { + compatible = "wm,wm8505-i2c"; + reg = <0xd8280000 0x1000>; + interrupts = <19>; + clocks = <&clki2c0>; + clock-frequency = <400000>; + }; diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index d55b8ab2d10f..d29dea0f3232 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -24,6 +24,7 @@ Supported adapters: * Intel Lynx Point-LP (PCH) * Intel Avoton (SOC) * Intel Wellsburg (PCH) + * Intel Coleto Creek (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/MAINTAINERS b/MAINTAINERS index 28ffeec53bb9..50105f98cb68 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1301,6 +1301,7 @@ S: Maintained F: arch/arm/mach-vt8500/ F: drivers/clocksource/vt8500_timer.c F: drivers/gpio/gpio-vt8500.c +F: drivers/i2c/busses/i2c-wmt.c F: drivers/mmc/host/wmt-sdmmc.c F: drivers/pwm/pwm-vt8500.c F: drivers/rtc/rtc-vt8500.c diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts index 0fa0d4abe795..ebc313a9f5b2 100644 --- a/arch/arc/boot/dts/abilis_tb100_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts @@ -45,19 +45,19 @@ }; i2c0: i2c@FF120000 { - sda-hold-time = <432>; + i2c-sda-hold-time-ns = <432>; }; i2c1: i2c@FF121000 { - sda-hold-time = <432>; + i2c-sda-hold-time-ns = <432>; }; i2c2: i2c@FF122000 { - sda-hold-time = <432>; + i2c-sda-hold-time-ns = <432>; }; i2c3: i2c@FF123000 { - sda-hold-time = <432>; + i2c-sda-hold-time-ns = <432>; }; i2c4: i2c@FF124000 { - sda-hold-time = <432>; + i2c-sda-hold-time-ns = <432>; }; leds { diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts index a4d80ce283ae..b204657993aa 100644 --- a/arch/arc/boot/dts/abilis_tb101_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts @@ -45,19 +45,19 @@ }; i2c0: i2c@FF120000 { - sda-hold-time = <432>; + i2c-sda-hold-time-ns = <432>; }; i2c1: i2c@FF121000 { - sda-hold-time = <432>; + i2c-sda-hold-time-ns = <432>; }; i2c2: i2c@FF122000 { - sda-hold-time = <432>; + i2c-sda-hold-time-ns = <432>; }; i2c3: i2c@FF123000 { - sda-hold-time = <432>; + i2c-sda-hold-time-ns = <432>; }; i2c4: i2c@FF124000 { - sda-hold-time = <432>; + i2c-sda-hold-time-ns = <432>; }; leds { diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 527503617ee2..fdc2ab4af315 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -108,6 +108,7 @@ config I2C_I801 Lynx Point-LP (PCH) Avoton (SOC) Wellsburg (PCH) + Coleto Creek (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. @@ -475,16 +476,6 @@ config I2C_IMX This driver can also be built as a module. If so, the module will be called i2c-imx. -config I2C_INTEL_MID - tristate "Intel Moorestown/Medfield Platform I2C controller" - depends on PCI - help - Say Y here if you have an Intel Moorestown/Medfield platform I2C - controller. - - This support is also available as a module. If so, the module - will be called i2c-intel-mid. - config I2C_IOP3XX tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface" depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX @@ -495,6 +486,16 @@ config I2C_IOP3XX This driver can also be built as a module. If so, the module will be called i2c-iop3xx. +config I2C_KEMPLD + tristate "Kontron COM I2C Controller" + depends on MFD_KEMPLD + help + This enables support for the I2C bus interface on some Kontron ETX + and COMexpress (ETXexpress) modules. + + This driver can also be built as a module. If so, the module + will be called i2c-kempld. + config I2C_MPC tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx" depends on PPC @@ -508,10 +509,11 @@ config I2C_MPC config I2C_MV64XXX tristate "Marvell mv64xxx I2C Controller" - depends on (MV64X60 || PLAT_ORION) + depends on (MV64X60 || PLAT_ORION || ARCH_SUNXI) help If you say yes to this option, support will be included for the built-in I2C interface on the Marvell 64xxx line of host bridges. + This driver is also used for Allwinner SoCs I2C controllers. This driver can also be built as a module. If so, the module will be called i2c-mv64xxx. @@ -725,6 +727,16 @@ config I2C_VERSATILE This driver can also be built as a module. If so, the module will be called i2c-versatile. +config I2C_WMT + tristate "Wondermedia WM8xxx SoC I2C bus support" + depends on ARCH_VT8500 + help + Say yes if you want to support the I2C bus on Wondermedia 8xxx-series + SoCs. + + This driver can also be built as a module. If so, the module will be + called i2c-wmt. + config I2C_OCTEON tristate "Cavium OCTEON I2C bus support" depends on CPU_CAVIUM_OCTEON diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 8f4fc23b85b1..d00997f3eb3b 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -46,8 +46,8 @@ obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IMX) += i2c-imx.o -obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o +obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o obj-$(CONFIG_I2C_MXS) += i2c-mxs.o @@ -71,6 +71,7 @@ obj-$(CONFIG_I2C_SIRF) += i2c-sirf.o obj-$(CONFIG_I2C_STU300) += i2c-stu300.o obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o +obj-$(CONFIG_I2C_WMT) += i2c-wmt.o obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o obj-$(CONFIG_I2C_XLR) += i2c-xlr.o diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 05080c449c6b..13ea1c29873d 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -39,33 +39,40 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, unsigned short mast_stat = read_MASTER_STAT(iface); if (twi_int_status & XMTSERV) { + if (iface->writeNum <= 0) { + /* start receive immediately after complete sending in + * combine mode. + */ + if (iface->cur_mode == TWI_I2C_MODE_COMBINED) + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) | MDIR); + else if (iface->manual_stop) + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) | STOP); + else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && + iface->cur_msg + 1 < iface->msg_num) { + if (iface->pmsg[iface->cur_msg + 1].flags & + I2C_M_RD) + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) | + MDIR); + else + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) & + ~MDIR); + } + } /* Transmit next data */ - if (iface->writeNum > 0) { + while (iface->writeNum > 0 && + (read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) { SSYNC(); write_XMT_DATA8(iface, *(iface->transPtr++)); iface->writeNum--; } - /* start receive immediately after complete sending in - * combine mode. - */ - else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | MDIR); - else if (iface->manual_stop) - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | STOP); - else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && - iface->cur_msg + 1 < iface->msg_num) { - if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD) - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | MDIR); - else - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) & ~MDIR); - } } if (twi_int_status & RCVSERV) { - if (iface->readNum > 0) { + while (iface->readNum > 0 && + (read_FIFO_STAT(iface) & RCVSTAT)) { /* Receive next data */ *(iface->transPtr) = read_RCV_DATA8(iface); if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 9e6002108720..2e1f7eb55bf4 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -654,7 +654,7 @@ static int cpm_i2c_probe(struct platform_device *ofdev) cpm->ofdev = ofdev; - dev_set_drvdata(&ofdev->dev, cpm); + platform_set_drvdata(ofdev, cpm); cpm->adap = cpm_ops; i2c_set_adapdata(&cpm->adap, cpm); @@ -697,7 +697,7 @@ out_free: static int cpm_i2c_remove(struct platform_device *ofdev) { - struct cpm_i2c *cpm = dev_get_drvdata(&ofdev->dev); + struct cpm_i2c *cpm = platform_get_drvdata(ofdev); i2c_del_adapter(&cpm->adap); diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index cf20e06a88e1..fa556057d224 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -646,13 +646,6 @@ static int davinci_i2c_probe(struct platform_device *pdev) struct resource *mem, *irq; int r; - /* NOTE: driver uses the static register mapping */ - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "no mem resource?\n"); - return -ENODEV; - } - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq) { dev_err(&pdev->dev, "no irq resource?\n"); @@ -697,6 +690,7 @@ static int davinci_i2c_probe(struct platform_device *pdev) return -ENODEV; clk_prepare_enable(dev->clk); + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); dev->base = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(dev->base)) { r = PTR_ERR(dev->base); diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index c41ca6354fc5..ad46616de29e 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -67,9 +67,12 @@ #define DW_IC_STATUS 0x70 #define DW_IC_TXFLR 0x74 #define DW_IC_RXFLR 0x78 +#define DW_IC_SDA_HOLD 0x7c #define DW_IC_TX_ABRT_SOURCE 0x80 #define DW_IC_ENABLE_STATUS 0x9c #define DW_IC_COMP_PARAM_1 0xf4 +#define DW_IC_COMP_VERSION 0xf8 +#define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A #define DW_IC_COMP_TYPE 0xfc #define DW_IC_COMP_TYPE_VALUE 0x44570140 @@ -332,6 +335,16 @@ int i2c_dw_init(struct dw_i2c_dev *dev) dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT); dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); + /* Configure SDA Hold Time if required */ + if (dev->sda_hold_time) { + reg = dw_readl(dev, DW_IC_COMP_VERSION); + if (reg >= DW_IC_SDA_HOLD_MIN_VERS) + dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD); + else + dev_warn(dev->dev, + "Hardware too old to adjust SDA hold time."); + } + /* Configure Tx/Rx FIFO threshold levels */ dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL); dw_writel(dev, 0, DW_IC_RX_TL); @@ -580,14 +593,23 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) i2c_dw_xfer_init(dev); /* wait for tx to complete */ - ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, HZ); + ret = wait_for_completion_timeout(&dev->cmd_complete, HZ); if (ret == 0) { dev_err(dev->dev, "controller timed out\n"); + /* i2c_dw_init implicitly disables the adapter */ i2c_dw_init(dev); ret = -ETIMEDOUT; goto done; - } else if (ret < 0) - goto done; + } + + /* + * We must disable the adapter before unlocking the &dev->lock mutex + * below. Otherwise the hardware might continue generating interrupts + * which in turn causes a race condition with the following transfer. + * Needs some more investigation if the additional interrupts are + * a hardware bug or this driver doesn't handle them correctly yet. + */ + __i2c_dw_enable(dev, false); if (dev->msg_err) { ret = dev->msg_err; @@ -596,8 +618,6 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) /* no error */ if (likely(!dev->cmd_err)) { - /* Disable the adapter */ - __i2c_dw_enable(dev, false); ret = num; goto done; } diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index e761ad18dd61..912aa2262866 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -90,6 +90,7 @@ struct dw_i2c_dev { unsigned int tx_fifo_depth; unsigned int rx_fifo_depth; int rx_outstanding; + u32 sda_hold_time; }; #define ACCESS_SWAP 0x00000001 diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 35b70a1edf57..4c5fadabe49d 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -34,6 +34,7 @@ #include <linux/sched.h> #include <linux/err.h> #include <linux/interrupt.h> +#include <linux/of.h> #include <linux/of_i2c.h> #include <linux/platform_device.h> #include <linux/pm.h> @@ -87,13 +88,6 @@ static int dw_i2c_probe(struct platform_device *pdev) struct resource *mem; int irq, r; - /* NOTE: driver uses the static register mapping */ - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "no mem resource?\n"); - return -EINVAL; - } - irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "no irq resource?\n"); @@ -104,6 +98,7 @@ static int dw_i2c_probe(struct platform_device *pdev) if (!dev) return -ENOMEM; + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); dev->base = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(dev->base)) return PTR_ERR(dev->base); @@ -121,6 +116,16 @@ static int dw_i2c_probe(struct platform_device *pdev) return PTR_ERR(dev->clk); clk_prepare_enable(dev->clk); + if (pdev->dev.of_node) { + u32 ht = 0; + u32 ic_clk = dev->get_clk_rate_khz(dev); + + of_property_read_u32(pdev->dev.of_node, + "i2c-sda-hold-time-ns", &ht); + dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000, + 1000000); + } + dev->functionality = I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 3a6903f63913..4ebceed6bc66 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -58,6 +58,7 @@ Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes + Coleto Creek (PCH) 0x23b0 32 hard yes yes yes Features supported by this driver: Software PEC no @@ -169,6 +170,7 @@ #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 #define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 +#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22 @@ -817,6 +819,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 405a2e240454..973f51688276 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -705,7 +705,7 @@ static int iic_probe(struct platform_device *ofdev) return -ENOMEM; } - dev_set_drvdata(&ofdev->dev, dev); + platform_set_drvdata(ofdev, dev); dev->vaddr = of_iomap(np, 0); if (dev->vaddr == NULL) { @@ -782,7 +782,7 @@ error_cleanup: */ static int iic_remove(struct platform_device *ofdev) { - struct ibm_iic_private *dev = dev_get_drvdata(&ofdev->dev); + struct ibm_iic_private *dev = platform_get_drvdata(ofdev); i2c_del_adapter(&dev->adap); diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 82f20c60bb7b..e24279725d36 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -51,7 +51,6 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_i2c.h> -#include <linux/pinctrl/consumer.h> #include <linux/platform_data/i2c-imx.h> /** Defines ******************************************************************** @@ -148,6 +147,7 @@ static const struct of_device_id i2c_imx_dt_ids[] = { { .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids); static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx) { @@ -493,24 +493,19 @@ static int __init i2c_imx_probe(struct platform_device *pdev) struct imx_i2c_struct *i2c_imx; struct resource *res; struct imxi2c_platform_data *pdata = pdev->dev.platform_data; - struct pinctrl *pinctrl; void __iomem *base; int irq, ret; u32 bitrate; dev_dbg(&pdev->dev, "<%s>\n", __func__); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get device resources\n"); - return -ENOENT; - } irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "can't get irq number\n"); return -ENOENT; } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); @@ -535,12 +530,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev) i2c_imx->adapter.dev.of_node = pdev->dev.of_node; i2c_imx->base = base; - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(pinctrl)) { - dev_err(&pdev->dev, "can't get/select pinctrl\n"); - return PTR_ERR(pinctrl); - } - /* Get I2C clock */ i2c_imx->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(i2c_imx->clk)) { diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c deleted file mode 100644 index 0fb659726ffc..000000000000 --- a/drivers/i2c/busses/i2c-intel-mid.c +++ /dev/null @@ -1,1121 +0,0 @@ -/* - * Support for Moorestown/Medfield I2C chip - * - * Copyright (c) 2009 Intel Corporation. - * Copyright (c) 2009 Synopsys. Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, version - * 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT ANY - * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS - * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., 51 - * Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/stat.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/pm_runtime.h> -#include <linux/io.h> - -#define DRIVER_NAME "i2c-intel-mid" -#define VERSION "Version 0.5ac2" -#define PLATFORM "Moorestown/Medfield" - -/* Tables use: 0 Moorestown, 1 Medfield */ -#define NUM_PLATFORMS 2 -enum platform_enum { - MOORESTOWN = 0, - MEDFIELD = 1, -}; - -enum mid_i2c_status { - STATUS_IDLE = 0, - STATUS_READ_START, - STATUS_READ_IN_PROGRESS, - STATUS_READ_SUCCESS, - STATUS_WRITE_START, - STATUS_WRITE_SUCCESS, - STATUS_XFER_ABORT, - STATUS_STANDBY -}; - -/** - * struct intel_mid_i2c_private - per device I²C context - * @adap: core i2c layer adapter information - * @dev: device reference for power management - * @base: register base - * @speed: speed mode for this port - * @complete: completion object for transaction wait - * @abort: reason for last abort - * @rx_buf: pointer into working receive buffer - * @rx_buf_len: receive buffer length - * @status: adapter state machine - * @msg: the message we are currently processing - * @platform: the MID device type we are part of - * @lock: transaction serialization - * - * We allocate one of these per device we discover, it holds the core - * i2c layer objects and the data we need to track privately. - */ -struct intel_mid_i2c_private { - struct i2c_adapter adap; - struct device *dev; - void __iomem *base; - int speed; - struct completion complete; - int abort; - u8 *rx_buf; - int rx_buf_len; - enum mid_i2c_status status; - struct i2c_msg *msg; - enum platform_enum platform; - struct mutex lock; -}; - -#define NUM_SPEEDS 3 - -#define ACTIVE 0 -#define STANDBY 1 - - -/* Control register */ -#define IC_CON 0x00 -#define SLV_DIS (1 << 6) /* Disable slave mode */ -#define RESTART (1 << 5) /* Send a Restart condition */ -#define ADDR_10BIT (1 << 4) /* 10-bit addressing */ -#define STANDARD_MODE (1 << 1) /* standard mode */ -#define FAST_MODE (2 << 1) /* fast mode */ -#define HIGH_MODE (3 << 1) /* high speed mode */ -#define MASTER_EN (1 << 0) /* Master mode */ - -/* Target address register */ -#define IC_TAR 0x04 -#define IC_TAR_10BIT_ADDR (1 << 12) /* 10-bit addressing */ -#define IC_TAR_SPECIAL (1 << 11) /* Perform special I2C cmd */ -#define IC_TAR_GC_OR_START (1 << 10) /* 0: Gerneral Call Address */ - /* 1: START BYTE */ -/* Slave Address Register */ -#define IC_SAR 0x08 /* Not used in Master mode */ - -/* High Speed Master Mode Code Address Register */ -#define IC_HS_MADDR 0x0c - -/* Rx/Tx Data Buffer and Command Register */ -#define IC_DATA_CMD 0x10 -#define IC_RD (1 << 8) /* 1: Read 0: Write */ - -/* Standard Speed Clock SCL High Count Register */ -#define IC_SS_SCL_HCNT 0x14 - -/* Standard Speed Clock SCL Low Count Register */ -#define IC_SS_SCL_LCNT 0x18 - -/* Fast Speed Clock SCL High Count Register */ -#define IC_FS_SCL_HCNT 0x1c - -/* Fast Spedd Clock SCL Low Count Register */ -#define IC_FS_SCL_LCNT 0x20 - -/* High Speed Clock SCL High Count Register */ -#define IC_HS_SCL_HCNT 0x24 - -/* High Speed Clock SCL Low Count Register */ -#define IC_HS_SCL_LCNT 0x28 - -/* Interrupt Status Register */ -#define IC_INTR_STAT 0x2c /* Read only */ -#define R_GEN_CALL (1 << 11) -#define R_START_DET (1 << 10) -#define R_STOP_DET (1 << 9) -#define R_ACTIVITY (1 << 8) -#define R_RX_DONE (1 << 7) -#define R_TX_ABRT (1 << 6) -#define R_RD_REQ (1 << 5) -#define R_TX_EMPTY (1 << 4) -#define R_TX_OVER (1 << 3) -#define R_RX_FULL (1 << 2) -#define R_RX_OVER (1 << 1) -#define R_RX_UNDER (1 << 0) - -/* Interrupt Mask Register */ -#define IC_INTR_MASK 0x30 /* Read and Write */ -#define M_GEN_CALL (1 << 11) -#define M_START_DET (1 << 10) -#define M_STOP_DET (1 << 9) -#define M_ACTIVITY (1 << 8) -#define M_RX_DONE (1 << 7) -#define M_TX_ABRT (1 << 6) -#define M_RD_REQ (1 << 5) -#define M_TX_EMPTY (1 << 4) -#define M_TX_OVER (1 << 3) -#define M_RX_FULL (1 << 2) -#define M_RX_OVER (1 << 1) -#define M_RX_UNDER (1 << 0) - -/* Raw Interrupt Status Register */ -#define IC_RAW_INTR_STAT 0x34 /* Read Only */ -#define GEN_CALL (1 << 11) /* General call */ -#define START_DET (1 << 10) /* (RE)START occurred */ -#define STOP_DET (1 << 9) /* STOP occurred */ -#define ACTIVITY (1 << 8) /* Bus busy */ -#define RX_DONE (1 << 7) /* Not used in Master mode */ -#define TX_ABRT (1 << 6) /* Transmit Abort */ -#define RD_REQ (1 << 5) /* Not used in Master mode */ -#define TX_EMPTY (1 << 4) /* TX FIFO <= threshold */ -#define TX_OVER (1 << 3) /* TX FIFO overflow */ -#define RX_FULL (1 << 2) /* RX FIFO >= threshold */ -#define RX_OVER (1 << 1) /* RX FIFO overflow */ -#define RX_UNDER (1 << 0) /* RX FIFO empty */ - -/* Receive FIFO Threshold Register */ -#define IC_RX_TL 0x38 - -/* Transmit FIFO Treshold Register */ -#define IC_TX_TL 0x3c - -/* Clear Combined and Individual Interrupt Register */ -#define IC_CLR_INTR 0x40 -#define CLR_INTR (1 << 0) - -/* Clear RX_UNDER Interrupt Register */ -#define IC_CLR_RX_UNDER 0x44 -#define CLR_RX_UNDER (1 << 0) - -/* Clear RX_OVER Interrupt Register */ -#define IC_CLR_RX_OVER 0x48 -#define CLR_RX_OVER (1 << 0) - -/* Clear TX_OVER Interrupt Register */ -#define IC_CLR_TX_OVER 0x4c -#define CLR_TX_OVER (1 << 0) - -#define IC_CLR_RD_REQ 0x50 - -/* Clear TX_ABRT Interrupt Register */ -#define IC_CLR_TX_ABRT 0x54 -#define CLR_TX_ABRT (1 << 0) -#define IC_CLR_RX_DONE 0x58 - -/* Clear ACTIVITY Interrupt Register */ -#define IC_CLR_ACTIVITY 0x5c -#define CLR_ACTIVITY (1 << 0) - -/* Clear STOP_DET Interrupt Register */ -#define IC_CLR_STOP_DET 0x60 -#define CLR_STOP_DET (1 << 0) - -/* Clear START_DET Interrupt Register */ -#define IC_CLR_START_DET 0x64 -#define CLR_START_DET (1 << 0) - -/* Clear GEN_CALL Interrupt Register */ -#define IC_CLR_GEN_CALL 0x68 -#define CLR_GEN_CALL (1 << 0) - -/* Enable Register */ -#define IC_ENABLE 0x6c -#define ENABLE (1 << 0) - -/* Status Register */ -#define IC_STATUS 0x70 /* Read Only */ -#define STAT_SLV_ACTIVITY (1 << 6) /* Slave not in idle */ -#define STAT_MST_ACTIVITY (1 << 5) /* Master not in idle */ -#define STAT_RFF (1 << 4) /* RX FIFO Full */ -#define STAT_RFNE (1 << 3) /* RX FIFO Not Empty */ -#define STAT_TFE (1 << 2) /* TX FIFO Empty */ -#define STAT_TFNF (1 << 1) /* TX FIFO Not Full */ -#define STAT_ACTIVITY (1 << 0) /* Activity Status */ - -/* Transmit FIFO Level Register */ -#define IC_TXFLR 0x74 /* Read Only */ -#define TXFLR (1 << 0) /* TX FIFO level */ - -/* Receive FIFO Level Register */ -#define IC_RXFLR 0x78 /* Read Only */ -#define RXFLR (1 << 0) /* RX FIFO level */ - -/* Transmit Abort Source Register */ -#define IC_TX_ABRT_SOURCE 0x80 -#define ABRT_SLVRD_INTX (1 << 15) -#define ABRT_SLV_ARBLOST (1 << 14) -#define ABRT_SLVFLUSH_TXFIFO (1 << 13) -#define ARB_LOST (1 << 12) -#define ABRT_MASTER_DIS (1 << 11) -#define ABRT_10B_RD_NORSTRT (1 << 10) -#define ABRT_SBYTE_NORSTRT (1 << 9) -#define ABRT_HS_NORSTRT (1 << 8) -#define ABRT_SBYTE_ACKDET (1 << 7) -#define ABRT_HS_ACKDET (1 << 6) -#define ABRT_GCALL_READ (1 << 5) -#define ABRT_GCALL_NOACK (1 << 4) -#define ABRT_TXDATA_NOACK (1 << 3) -#define ABRT_10ADDR2_NOACK (1 << 2) -#define ABRT_10ADDR1_NOACK (1 << 1) -#define ABRT_7B_ADDR_NOACK (1 << 0) - -/* Enable Status Register */ -#define IC_ENABLE_STATUS 0x9c -#define IC_EN (1 << 0) /* I2C in an enabled state */ - -/* Component Parameter Register 1*/ -#define IC_COMP_PARAM_1 0xf4 -#define APB_DATA_WIDTH (0x3 << 0) - -/* added by xiaolin --begin */ -#define SS_MIN_SCL_HIGH 4000 -#define SS_MIN_SCL_LOW 4700 -#define FS_MIN_SCL_HIGH 600 -#define FS_MIN_SCL_LOW 1300 -#define HS_MIN_SCL_HIGH_100PF 60 -#define HS_MIN_SCL_LOW_100PF 120 - -#define STANDARD 0 -#define FAST 1 -#define HIGH 2 - -#define NUM_SPEEDS 3 - -static int speed_mode[6] = { - FAST, - FAST, - FAST, - STANDARD, - FAST, - FAST -}; - -static int ctl_num = 6; -module_param_array(speed_mode, int, &ctl_num, S_IRUGO); -MODULE_PARM_DESC(speed_mode, "Set the speed of the i2c interface (0-2)"); - -/** - * intel_mid_i2c_disable - Disable I2C controller - * @adap: struct pointer to i2c_adapter - * - * Return Value: - * 0 success - * -EBUSY if device is busy - * -ETIMEDOUT if i2c cannot be disabled within the given time - * - * I2C bus state should be checked prior to disabling the hardware. If bus is - * not in idle state, an errno is returned. Write "0" to IC_ENABLE to disable - * I2C controller. - */ -static int intel_mid_i2c_disable(struct i2c_adapter *adap) -{ - struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap); - int err = 0; - int count = 0; - int ret1, ret2; - static const u16 delay[NUM_SPEEDS] = {100, 25, 3}; - - /* Set IC_ENABLE to 0 */ - writel(0, i2c->base + IC_ENABLE); - - /* Check if device is busy */ - dev_dbg(&adap->dev, "mrst i2c disable\n"); - while ((ret1 = readl(i2c->base + IC_ENABLE_STATUS) & 0x1) - || (ret2 = readl(i2c->base + IC_STATUS) & 0x1)) { - udelay(delay[i2c->speed]); - writel(0, i2c->base + IC_ENABLE); - dev_dbg(&adap->dev, "i2c is busy, count is %d speed %d\n", - count, i2c->speed); - if (count++ > 10) { - err = -ETIMEDOUT; - break; - } - } - - /* Clear all interrupts */ - readl(i2c->base + IC_CLR_INTR); - readl(i2c->base + IC_CLR_STOP_DET); - readl(i2c->base + IC_CLR_START_DET); - readl(i2c->base + IC_CLR_ACTIVITY); - readl(i2c->base + IC_CLR_TX_ABRT); - readl(i2c->base + IC_CLR_RX_OVER); - readl(i2c->base + IC_CLR_RX_UNDER); - readl(i2c->base + IC_CLR_TX_OVER); - readl(i2c->base + IC_CLR_RX_DONE); - readl(i2c->base + IC_CLR_GEN_CALL); - - /* Disable all interupts */ - writel(0x0000, i2c->base + IC_INTR_MASK); - - return err; -} - -/** - * intel_mid_i2c_hwinit - Initialize the I2C hardware registers - * @dev: pci device struct pointer - * - * This function will be called in intel_mid_i2c_probe() before device - * registration. - * - * Return Values: - * 0 success - * -EBUSY i2c cannot be disabled - * -ETIMEDOUT i2c cannot be disabled - * -EFAULT If APB data width is not 32-bit wide - * - * I2C should be disabled prior to other register operation. If failed, an - * errno is returned. Mask and Clear all interrpts, this should be done at - * first. Set common registers which will not be modified during normal - * transfers, including: control register, FIFO threshold and clock freq. - * Check APB data width at last. - */ -static int intel_mid_i2c_hwinit(struct intel_mid_i2c_private *i2c) -{ - int err; - - static const u16 hcnt[NUM_PLATFORMS][NUM_SPEEDS] = { - { 0x75, 0x15, 0x07 }, - { 0x04c, 0x10, 0x06 } - }; - static const u16 lcnt[NUM_PLATFORMS][NUM_SPEEDS] = { - { 0x7C, 0x21, 0x0E }, - { 0x053, 0x19, 0x0F } - }; - - /* Disable i2c first */ - err = intel_mid_i2c_disable(&i2c->adap); - if (err) - return err; - - /* - * Setup clock frequency and speed mode - * Enable restart condition, - * enable master FSM, disable slave FSM, - * use target address when initiating transfer - */ - - writel((i2c->speed + 1) << 1 | SLV_DIS | RESTART | MASTER_EN, - i2c->base + IC_CON); - writel(hcnt[i2c->platform][i2c->speed], - i2c->base + (IC_SS_SCL_HCNT + (i2c->speed << 3))); - writel(lcnt[i2c->platform][i2c->speed], - i2c->base + (IC_SS_SCL_LCNT + (i2c->speed << 3))); - - /* Set tranmit & receive FIFO threshold to zero */ - writel(0x0, i2c->base + IC_RX_TL); - writel(0x0, i2c->base + IC_TX_TL); - - return 0; -} - -/** - * intel_mid_i2c_func - Return the supported three I2C operations. - * @adapter: i2c_adapter struct pointer - */ -static u32 intel_mid_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL; -} - -/** - * intel_mid_i2c_address_neq - To check if the addresses for different i2c messages - * are equal. - * @p1: first i2c_msg - * @p2: second i2c_msg - * - * Return Values: - * 0 if addresses are equal - * 1 if not equal - * - * Within a single transfer, the I2C client may need to send its address more - * than once. So a check if the addresses match is needed. - */ -static inline bool intel_mid_i2c_address_neq(const struct i2c_msg *p1, - const struct i2c_msg *p2) -{ - if (p1->addr != p2->addr) - return 1; - if ((p1->flags ^ p2->flags) & I2C_M_TEN) - return 1; - return 0; -} - -/** - * intel_mid_i2c_abort - To handle transfer abortions and print error messages. - * @adap: i2c_adapter struct pointer - * - * By reading register IC_TX_ABRT_SOURCE, various transfer errors can be - * distingushed. At present, no circumstances have been found out that - * multiple errors would be occurred simutaneously, so we simply use the - * register value directly. - * - * At last the error bits are cleared. (Note clear ABRT_SBYTE_NORSTRT bit need - * a few extra steps) - */ -static void intel_mid_i2c_abort(struct intel_mid_i2c_private *i2c) -{ - /* Read about source register */ - int abort = i2c->abort; - struct i2c_adapter *adap = &i2c->adap; - - /* Single transfer error check: - * According to databook, TX/RX FIFOs would be flushed when - * the abort interrupt occurred. - */ - if (abort & ABRT_MASTER_DIS) - dev_err(&adap->dev, - "initiate master operation with master mode disabled.\n"); - if (abort & ABRT_10B_RD_NORSTRT) - dev_err(&adap->dev, - "RESTART disabled and master sent READ cmd in 10-bit addressing.\n"); - - if (abort & ABRT_SBYTE_NORSTRT) { - dev_err(&adap->dev, - "RESTART disabled and user is trying to send START byte.\n"); - writel(~ABRT_SBYTE_NORSTRT, i2c->base + IC_TX_ABRT_SOURCE); - writel(RESTART, i2c->base + IC_CON); - writel(~IC_TAR_SPECIAL, i2c->base + IC_TAR); - } - - if (abort & ABRT_SBYTE_ACKDET) - dev_err(&adap->dev, - "START byte was not acknowledged.\n"); - if (abort & ABRT_TXDATA_NOACK) - dev_dbg(&adap->dev, - "No acknowledgement received from slave.\n"); - if (abort & ABRT_10ADDR2_NOACK) - dev_dbg(&adap->dev, - "The 2nd address byte of the 10-bit address was not acknowledged.\n"); - if (abort & ABRT_10ADDR1_NOACK) - dev_dbg(&adap->dev, - "The 1st address byte of 10-bit address was not acknowledged.\n"); - if (abort & ABRT_7B_ADDR_NOACK) - dev_dbg(&adap->dev, - "I2C slave device not acknowledged.\n"); - - /* Clear TX_ABRT bit */ - readl(i2c->base + IC_CLR_TX_ABRT); - i2c->status = STATUS_XFER_ABORT; -} - -/** - * xfer_read - Internal function to implement master read transfer. - * @adap: i2c_adapter struct pointer - * @buf: buffer in i2c_msg - * @length: number of bytes to be read - * - * Return Values: - * 0 if the read transfer succeeds - * -ETIMEDOUT if cannot read the "raw" interrupt register - * -EINVAL if a transfer abort occurred - * - * For every byte, a "READ" command will be loaded into IC_DATA_CMD prior to - * data transfer. The actual "read" operation will be performed if an RX_FULL - * interrupt occurred. - * - * Note there may be two interrupt signals captured, one should read - * IC_RAW_INTR_STAT to separate between errors and actual data. - */ -static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length) -{ - struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap); - int i = length; - int err; - - if (length >= 256) { - dev_err(&adap->dev, - "I2C FIFO cannot support larger than 256 bytes\n"); - return -EMSGSIZE; - } - - INIT_COMPLETION(i2c->complete); - - readl(i2c->base + IC_CLR_INTR); - writel(0x0044, i2c->base + IC_INTR_MASK); - - i2c->status = STATUS_READ_START; - - while (i--) - writel(IC_RD, i2c->base + IC_DATA_CMD); - - i2c->status = STATUS_READ_START; - err = wait_for_completion_interruptible_timeout(&i2c->complete, HZ); - if (!err) { - dev_err(&adap->dev, "Timeout for ACK from I2C slave device\n"); - intel_mid_i2c_hwinit(i2c); - return -ETIMEDOUT; - } - if (i2c->status == STATUS_READ_SUCCESS) - return 0; - else - return -EIO; -} - -/** - * xfer_write - Internal function to implement master write transfer. - * @adap: i2c_adapter struct pointer - * @buf: buffer in i2c_msg - * @length: number of bytes to be read - * - * Return Values: - * 0 if the read transfer succeeds - * -ETIMEDOUT if we cannot read the "raw" interrupt register - * -EINVAL if a transfer abort occurred - * - * For every byte, a "WRITE" command will be loaded into IC_DATA_CMD prior to - * data transfer. The actual "write" operation will be performed when the - * RX_FULL interrupt signal occurs. - * - * Note there may be two interrupt signals captured, one should read - * IC_RAW_INTR_STAT to separate between errors and actual data. - */ -static int xfer_write(struct i2c_adapter *adap, - unsigned char *buf, int length) -{ - struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap); - int i, err; - - if (length >= 256) { - dev_err(&adap->dev, - "I2C FIFO cannot support larger than 256 bytes\n"); - return -EMSGSIZE; - } - - INIT_COMPLETION(i2c->complete); - - readl(i2c->base + IC_CLR_INTR); - writel(0x0050, i2c->base + IC_INTR_MASK); - - i2c->status = STATUS_WRITE_START; - for (i = 0; i < length; i++) - writel((u16)(*(buf + i)), i2c->base + IC_DATA_CMD); - - i2c->status = STATUS_WRITE_START; - err = wait_for_completion_interruptible_timeout(&i2c->complete, HZ); - if (!err) { - dev_err(&adap->dev, "Timeout for ACK from I2C slave device\n"); - intel_mid_i2c_hwinit(i2c); - return -ETIMEDOUT; - } else { - if (i2c->status == STATUS_WRITE_SUCCESS) - return 0; - else - return -EIO; - } -} - -static int intel_mid_i2c_setup(struct i2c_adapter *adap, struct i2c_msg *pmsg) -{ - struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap); - int err; - u32 reg; - u32 bit_mask; - u32 mode; - - /* Disable device first */ - err = intel_mid_i2c_disable(adap); - if (err) { - dev_err(&adap->dev, - "Cannot disable i2c controller, timeout\n"); - return err; - } - - mode = (1 + i2c->speed) << 1; - /* set the speed mode */ - reg = readl(i2c->base + IC_CON); - if ((reg & 0x06) != mode) { - dev_dbg(&adap->dev, "set mode %d\n", i2c->speed); - writel((reg & ~0x6) | mode, i2c->base + IC_CON); - } - - reg = readl(i2c->base + IC_CON); - /* use 7-bit addressing */ - if (pmsg->flags & I2C_M_TEN) { - if ((reg & ADDR_10BIT) != ADDR_10BIT) { - dev_dbg(&adap->dev, "set i2c 10 bit address mode\n"); - writel(reg | ADDR_10BIT, i2c->base + IC_CON); - } - } else { - if ((reg & ADDR_10BIT) != 0x0) { - dev_dbg(&adap->dev, "set i2c 7 bit address mode\n"); - writel(reg & ~ADDR_10BIT, i2c->base + IC_CON); - } - } - /* enable restart conditions */ - reg = readl(i2c->base + IC_CON); - if ((reg & RESTART) != RESTART) { - dev_dbg(&adap->dev, "enable restart conditions\n"); - writel(reg | RESTART, i2c->base + IC_CON); - } - - /* enable master FSM */ - reg = readl(i2c->base + IC_CON); - dev_dbg(&adap->dev, "ic_con reg is 0x%x\n", reg); - writel(reg | MASTER_EN, i2c->base + IC_CON); - if ((reg & SLV_DIS) != SLV_DIS) { - dev_dbg(&adap->dev, "enable master FSM\n"); - writel(reg | SLV_DIS, i2c->base + IC_CON); - dev_dbg(&adap->dev, "ic_con reg is 0x%x\n", reg); - } - - /* use target address when initiating transfer */ - reg = readl(i2c->base + IC_TAR); - bit_mask = IC_TAR_SPECIAL | IC_TAR_GC_OR_START; - - if ((reg & bit_mask) != 0x0) { - dev_dbg(&adap->dev, - "WR: use target address when intiating transfer, i2c_tx_target\n"); - writel(reg & ~bit_mask, i2c->base + IC_TAR); - } - - /* set target address to the I2C slave address */ - dev_dbg(&adap->dev, - "set target address to the I2C slave address, addr is %x\n", - pmsg->addr); - writel(pmsg->addr | (pmsg->flags & I2C_M_TEN ? IC_TAR_10BIT_ADDR : 0), - i2c->base + IC_TAR); - - /* Enable I2C controller */ - writel(ENABLE, i2c->base + IC_ENABLE); - - return 0; -} - -/** - * intel_mid_i2c_xfer - Main master transfer routine. - * @adap: i2c_adapter struct pointer - * @pmsg: i2c_msg struct pointer - * @num: number of i2c_msg - * - * Return Values: - * + number of messages transferred - * -ETIMEDOUT If cannot disable I2C controller or read IC_STATUS - * -EINVAL If the address in i2c_msg is invalid - * - * This function will be registered in i2c-core and exposed to external - * I2C clients. - * 1. Disable I2C controller - * 2. Unmask three interrupts: RX_FULL, TX_EMPTY, TX_ABRT - * 3. Check if address in i2c_msg is valid - * 4. Enable I2C controller - * 5. Perform real transfer (call xfer_read or xfer_write) - * 6. Wait until the current transfer is finished (check bus state) - * 7. Mask and clear all interrupts - */ -static int intel_mid_i2c_xfer(struct i2c_adapter *adap, - struct i2c_msg *pmsg, - int num) -{ - struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap); - int i, err = 0; - - /* if number of messages equal 0*/ - if (num == 0) - return 0; - - pm_runtime_get(i2c->dev); - - mutex_lock(&i2c->lock); - dev_dbg(&adap->dev, "intel_mid_i2c_xfer, process %d msg(s)\n", num); - dev_dbg(&adap->dev, "slave address is %x\n", pmsg->addr); - - - if (i2c->status != STATUS_IDLE) { - dev_err(&adap->dev, "Adapter %d in transfer/standby\n", - adap->nr); - mutex_unlock(&i2c->lock); - pm_runtime_put(i2c->dev); - return -1; - } - - - for (i = 1; i < num; i++) { - /* Message address equal? */ - if (unlikely(intel_mid_i2c_address_neq(&pmsg[0], &pmsg[i]))) { - dev_err(&adap->dev, "Invalid address in msg[%d]\n", i); - mutex_unlock(&i2c->lock); - pm_runtime_put(i2c->dev); - return -EINVAL; - } - } - - if (intel_mid_i2c_setup(adap, pmsg)) { - mutex_unlock(&i2c->lock); - pm_runtime_put(i2c->dev); - return -EINVAL; - } - - for (i = 0; i < num; i++) { - i2c->msg = pmsg; - i2c->status = STATUS_IDLE; - /* Read or Write */ - if (pmsg->flags & I2C_M_RD) { - dev_dbg(&adap->dev, "I2C_M_RD\n"); - err = xfer_read(adap, pmsg->buf, pmsg->len); - } else { - dev_dbg(&adap->dev, "I2C_M_WR\n"); - err = xfer_write(adap, pmsg->buf, pmsg->len); - } - if (err < 0) - break; - dev_dbg(&adap->dev, "msg[%d] transfer complete\n", i); - pmsg++; /* next message */ - } - - /* Mask interrupts */ - writel(0x0000, i2c->base + IC_INTR_MASK); - /* Clear all interrupts */ - readl(i2c->base + IC_CLR_INTR); - - i2c->status = STATUS_IDLE; - mutex_unlock(&i2c->lock); - pm_runtime_put(i2c->dev); - - return err; -} - -static int intel_mid_i2c_runtime_suspend(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct intel_mid_i2c_private *i2c = pci_get_drvdata(pdev); - struct i2c_adapter *adap = to_i2c_adapter(dev); - int err; - - if (i2c->status != STATUS_IDLE) - return -1; - - intel_mid_i2c_disable(adap); - - err = pci_save_state(pdev); - if (err) { - dev_err(dev, "pci_save_state failed\n"); - return err; - } - - err = pci_set_power_state(pdev, PCI_D3hot); - if (err) { - dev_err(dev, "pci_set_power_state failed\n"); - return err; - } - i2c->status = STATUS_STANDBY; - - return 0; -} - -static int intel_mid_i2c_runtime_resume(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct intel_mid_i2c_private *i2c = pci_get_drvdata(pdev); - int err; - - if (i2c->status != STATUS_STANDBY) - return 0; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - err = pci_enable_device(pdev); - if (err) { - dev_err(dev, "pci_enable_device failed\n"); - return err; - } - - i2c->status = STATUS_IDLE; - - intel_mid_i2c_hwinit(i2c); - return err; -} - -static void i2c_isr_read(struct intel_mid_i2c_private *i2c) -{ - struct i2c_msg *msg = i2c->msg; - int rx_num; - u32 len; - u8 *buf; - - if (!(msg->flags & I2C_M_RD)) - return; - - if (i2c->status != STATUS_READ_IN_PROGRESS) { - len = msg->len; - buf = msg->buf; - } else { - len = i2c->rx_buf_len; - buf = i2c->rx_buf; - } - - rx_num = readl(i2c->base + IC_RXFLR); - - for (; len > 0 && rx_num > 0; len--, rx_num--) - *buf++ = readl(i2c->base + IC_DATA_CMD); - - if (len > 0) { - i2c->status = STATUS_READ_IN_PROGRESS; - i2c->rx_buf_len = len; - i2c->rx_buf = buf; - } else - i2c->status = STATUS_READ_SUCCESS; - - return; -} - -static irqreturn_t intel_mid_i2c_isr(int this_irq, void *dev) -{ - struct intel_mid_i2c_private *i2c = dev; - u32 stat = readl(i2c->base + IC_INTR_STAT); - - if (!stat) - return IRQ_NONE; - - dev_dbg(&i2c->adap.dev, "%s, stat = 0x%x\n", __func__, stat); - stat &= 0x54; - - if (i2c->status != STATUS_WRITE_START && - i2c->status != STATUS_READ_START && - i2c->status != STATUS_READ_IN_PROGRESS) - goto err; - - if (stat & TX_ABRT) - i2c->abort = readl(i2c->base + IC_TX_ABRT_SOURCE); - - readl(i2c->base + IC_CLR_INTR); - - if (stat & TX_ABRT) { - intel_mid_i2c_abort(i2c); - goto exit; - } - - if (stat & RX_FULL) { - i2c_isr_read(i2c); - goto exit; - } - - if (stat & TX_EMPTY) { - if (readl(i2c->base + IC_STATUS) & 0x4) - i2c->status = STATUS_WRITE_SUCCESS; - } - -exit: - if (i2c->status == STATUS_READ_SUCCESS || - i2c->status == STATUS_WRITE_SUCCESS || - i2c->status == STATUS_XFER_ABORT) { - /* Clear all interrupts */ - readl(i2c->base + IC_CLR_INTR); - /* Mask interrupts */ - writel(0, i2c->base + IC_INTR_MASK); - complete(&i2c->complete); - } -err: - return IRQ_HANDLED; -} - -static struct i2c_algorithm intel_mid_i2c_algorithm = { - .master_xfer = intel_mid_i2c_xfer, - .functionality = intel_mid_i2c_func, -}; - - -static const struct dev_pm_ops intel_mid_i2c_pm_ops = { - .runtime_suspend = intel_mid_i2c_runtime_suspend, - .runtime_resume = intel_mid_i2c_runtime_resume, -}; - -/** - * intel_mid_i2c_probe - I2C controller initialization routine - * @dev: pci device - * @id: device id - * - * Return Values: - * 0 success - * -ENODEV If cannot allocate pci resource - * -ENOMEM If the register base remapping failed, or - * if kzalloc failed - * - * Initialization steps: - * 1. Request for PCI resource - * 2. Remap the start address of PCI resource to register base - * 3. Request for device memory region - * 4. Fill in the struct members of intel_mid_i2c_private - * 5. Call intel_mid_i2c_hwinit() for hardware initialization - * 6. Register I2C adapter in i2c-core - */ -static int intel_mid_i2c_probe(struct pci_dev *dev, - const struct pci_device_id *id) -{ - struct intel_mid_i2c_private *mrst; - unsigned long start, len; - int err, busnum; - void __iomem *base = NULL; - - dev_dbg(&dev->dev, "Get into probe function for I2C\n"); - err = pci_enable_device(dev); - if (err) { - dev_err(&dev->dev, "Failed to enable I2C PCI device (%d)\n", - err); - goto exit; - } - - /* Determine the address of the I2C area */ - start = pci_resource_start(dev, 0); - len = pci_resource_len(dev, 0); - if (!start || len == 0) { - dev_err(&dev->dev, "base address not set\n"); - err = -ENODEV; - goto exit; - } - dev_dbg(&dev->dev, "%s i2c resource start 0x%lx, len=%ld\n", - PLATFORM, start, len); - - err = pci_request_region(dev, 0, DRIVER_NAME); - if (err) { - dev_err(&dev->dev, "failed to request I2C region " - "0x%lx-0x%lx\n", start, - (unsigned long)pci_resource_end(dev, 0)); - goto exit; - } - - base = ioremap_nocache(start, len); - if (!base) { - dev_err(&dev->dev, "I/O memory remapping failed\n"); - err = -ENOMEM; - goto fail0; - } - - /* Allocate the per-device data structure, intel_mid_i2c_private */ - mrst = kzalloc(sizeof(struct intel_mid_i2c_private), GFP_KERNEL); - if (mrst == NULL) { - dev_err(&dev->dev, "can't allocate interface\n"); - err = -ENOMEM; - goto fail1; - } - - /* Initialize struct members */ - snprintf(mrst->adap.name, sizeof(mrst->adap.name), - "Intel MID I2C at %lx", start); - mrst->adap.owner = THIS_MODULE; - mrst->adap.algo = &intel_mid_i2c_algorithm; - mrst->adap.dev.parent = &dev->dev; - mrst->dev = &dev->dev; - mrst->base = base; - mrst->speed = STANDARD; - mrst->abort = 0; - mrst->rx_buf_len = 0; - mrst->status = STATUS_IDLE; - - pci_set_drvdata(dev, mrst); - i2c_set_adapdata(&mrst->adap, mrst); - - mrst->adap.nr = busnum = id->driver_data; - if (dev->device <= 0x0804) - mrst->platform = MOORESTOWN; - else - mrst->platform = MEDFIELD; - - dev_dbg(&dev->dev, "I2C%d\n", busnum); - - if (ctl_num > busnum) { - if (speed_mode[busnum] < 0 || speed_mode[busnum] >= NUM_SPEEDS) - dev_warn(&dev->dev, "invalid speed %d ignored.\n", - speed_mode[busnum]); - else - mrst->speed = speed_mode[busnum]; - } - - /* Initialize i2c controller */ - err = intel_mid_i2c_hwinit(mrst); - if (err < 0) { - dev_err(&dev->dev, "I2C interface initialization failed\n"); - goto fail2; - } - - mutex_init(&mrst->lock); - init_completion(&mrst->complete); - - /* Clear all interrupts */ - readl(mrst->base + IC_CLR_INTR); - writel(0x0000, mrst->base + IC_INTR_MASK); - - err = request_irq(dev->irq, intel_mid_i2c_isr, IRQF_SHARED, - mrst->adap.name, mrst); - if (err) { - dev_err(&dev->dev, "Failed to request IRQ for I2C controller: " - "%s", mrst->adap.name); - goto fail2; - } - - /* Adapter registration */ - err = i2c_add_numbered_adapter(&mrst->adap); - if (err) { - dev_err(&dev->dev, "Adapter %s registration failed\n", - mrst->adap.name); - goto fail3; - } - - dev_dbg(&dev->dev, "%s I2C bus %d driver bind success.\n", - (mrst->platform == MOORESTOWN) ? "Moorestown" : "Medfield", - busnum); - - pm_runtime_enable(&dev->dev); - return 0; - -fail3: - free_irq(dev->irq, mrst); -fail2: - kfree(mrst); -fail1: - iounmap(base); -fail0: - pci_release_region(dev, 0); -exit: - return err; -} - -static void intel_mid_i2c_remove(struct pci_dev *dev) -{ - struct intel_mid_i2c_private *mrst = pci_get_drvdata(dev); - intel_mid_i2c_disable(&mrst->adap); - i2c_del_adapter(&mrst->adap); - - free_irq(dev->irq, mrst); - iounmap(mrst->base); - kfree(mrst); - pci_release_region(dev, 0); -} - -static DEFINE_PCI_DEVICE_TABLE(intel_mid_i2c_ids) = { - /* Moorestown */ - { PCI_VDEVICE(INTEL, 0x0802), 0 }, - { PCI_VDEVICE(INTEL, 0x0803), 1 }, - { PCI_VDEVICE(INTEL, 0x0804), 2 }, - /* Medfield */ - { PCI_VDEVICE(INTEL, 0x0817), 3,}, - { PCI_VDEVICE(INTEL, 0x0818), 4 }, - { PCI_VDEVICE(INTEL, 0x0819), 5 }, - { PCI_VDEVICE(INTEL, 0x082C), 0 }, - { PCI_VDEVICE(INTEL, 0x082D), 1 }, - { PCI_VDEVICE(INTEL, 0x082E), 2 }, - { 0,} -}; -MODULE_DEVICE_TABLE(pci, intel_mid_i2c_ids); - -static struct pci_driver intel_mid_i2c_driver = { - .name = DRIVER_NAME, - .id_table = intel_mid_i2c_ids, - .probe = intel_mid_i2c_probe, - .remove = intel_mid_i2c_remove, -}; - -module_pci_driver(intel_mid_i2c_driver); - -MODULE_AUTHOR("Ba Zheng <zheng.ba@intel.com>"); -MODULE_DESCRIPTION("I2C driver for Moorestown Platform"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(VERSION); diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index bc993331c695..dd24aa0424a9 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -176,7 +176,7 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, interrupted = wait_event_interruptible_timeout ( iop3xx_adap->waitq, (done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )), - 1 * HZ; + 1 * HZ ); if ((rc = iop3xx_i2c_error(sr)) < 0) { *status = sr; diff --git a/drivers/i2c/busses/i2c-kempld.c b/drivers/i2c/busses/i2c-kempld.c new file mode 100644 index 000000000000..ccec916bc3eb --- /dev/null +++ b/drivers/i2c/busses/i2c-kempld.c @@ -0,0 +1,410 @@ +/* + * I2C bus driver for Kontron COM modules + * + * Copyright (c) 2010-2013 Kontron Europe GmbH + * Author: Michael Brunner <michael.brunner@kontron.com> + * + * The driver is based on the i2c-ocores driver by Peter Korsgaard. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/mfd/kempld.h> + +#define KEMPLD_I2C_PRELOW 0x0b +#define KEMPLD_I2C_PREHIGH 0x0c +#define KEMPLD_I2C_DATA 0x0e + +#define KEMPLD_I2C_CTRL 0x0d +#define I2C_CTRL_IEN 0x40 +#define I2C_CTRL_EN 0x80 + +#define KEMPLD_I2C_STAT 0x0f +#define I2C_STAT_IF 0x01 +#define I2C_STAT_TIP 0x02 +#define I2C_STAT_ARBLOST 0x20 +#define I2C_STAT_BUSY 0x40 +#define I2C_STAT_NACK 0x80 + +#define KEMPLD_I2C_CMD 0x0f +#define I2C_CMD_START 0x91 +#define I2C_CMD_STOP 0x41 +#define I2C_CMD_READ 0x21 +#define I2C_CMD_WRITE 0x11 +#define I2C_CMD_READ_ACK 0x21 +#define I2C_CMD_READ_NACK 0x29 +#define I2C_CMD_IACK 0x01 + +#define KEMPLD_I2C_FREQ_MAX 2700 /* 2.7 mHz */ +#define KEMPLD_I2C_FREQ_STD 100 /* 100 kHz */ + +enum { + STATE_DONE = 0, + STATE_INIT, + STATE_ADDR, + STATE_ADDR10, + STATE_START, + STATE_WRITE, + STATE_READ, + STATE_ERROR, +}; + +struct kempld_i2c_data { + struct device *dev; + struct kempld_device_data *pld; + struct i2c_adapter adap; + struct i2c_msg *msg; + int pos; + int nmsgs; + int state; + bool was_active; +}; + +static unsigned int bus_frequency = KEMPLD_I2C_FREQ_STD; +module_param(bus_frequency, uint, 0); +MODULE_PARM_DESC(bus_frequency, "Set I2C bus frequency in kHz (default=" + __MODULE_STRING(KEMPLD_I2C_FREQ_STD)")"); + +static int i2c_bus = -1; +module_param(i2c_bus, int, 0); +MODULE_PARM_DESC(i2c_bus, "Set I2C bus number (default=-1 for dynamic assignment)"); + +static bool i2c_gpio_mux; +module_param(i2c_gpio_mux, bool, 0); +MODULE_PARM_DESC(i2c_gpio_mux, "Enable I2C port on GPIO out (default=false)"); + +/* + * kempld_get_mutex must be called prior to calling this function. + */ +static int kempld_i2c_process(struct kempld_i2c_data *i2c) +{ + struct kempld_device_data *pld = i2c->pld; + u8 stat = kempld_read8(pld, KEMPLD_I2C_STAT); + struct i2c_msg *msg = i2c->msg; + u8 addr; + + /* Ready? */ + if (stat & I2C_STAT_TIP) + return -EBUSY; + + if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) { + /* Stop has been sent */ + kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_IACK); + if (i2c->state == STATE_ERROR) + return -EIO; + return 0; + } + + /* Error? */ + if (stat & I2C_STAT_ARBLOST) { + i2c->state = STATE_ERROR; + kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP); + return -EAGAIN; + } + + if (i2c->state == STATE_INIT) { + if (stat & I2C_STAT_BUSY) + return -EBUSY; + + i2c->state = STATE_ADDR; + } + + if (i2c->state == STATE_ADDR) { + /* 10 bit address? */ + if (i2c->msg->flags & I2C_M_TEN) { + addr = 0xf0 | ((i2c->msg->addr >> 7) & 0x6); + i2c->state = STATE_ADDR10; + } else { + addr = (i2c->msg->addr << 1); + i2c->state = STATE_START; + } + + /* Set read bit if necessary */ + addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0; + + kempld_write8(pld, KEMPLD_I2C_DATA, addr); + kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_START); + + return 0; + } + + /* Second part of 10 bit addressing */ + if (i2c->state == STATE_ADDR10) { + kempld_write8(pld, KEMPLD_I2C_DATA, i2c->msg->addr & 0xff); + kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_WRITE); + + i2c->state = STATE_START; + return 0; + } + + if (i2c->state == STATE_START || i2c->state == STATE_WRITE) { + i2c->state = (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE; + + if (stat & I2C_STAT_NACK) { + i2c->state = STATE_ERROR; + kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP); + return -ENXIO; + } + } else { + msg->buf[i2c->pos++] = kempld_read8(pld, KEMPLD_I2C_DATA); + } + + if (i2c->pos >= msg->len) { + i2c->nmsgs--; + i2c->msg++; + i2c->pos = 0; + msg = i2c->msg; + + if (i2c->nmsgs) { + if (!(msg->flags & I2C_M_NOSTART)) { + i2c->state = STATE_ADDR; + return 0; + } else { + i2c->state = (msg->flags & I2C_M_RD) + ? STATE_READ : STATE_WRITE; + } + } else { + i2c->state = STATE_DONE; + kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP); + return 0; + } + } + + if (i2c->state == STATE_READ) { + kempld_write8(pld, KEMPLD_I2C_CMD, i2c->pos == (msg->len - 1) ? + I2C_CMD_READ_NACK : I2C_CMD_READ_ACK); + } else { + kempld_write8(pld, KEMPLD_I2C_DATA, msg->buf[i2c->pos++]); + kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_WRITE); + } + + return 0; +} + +static int kempld_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, + int num) +{ + struct kempld_i2c_data *i2c = i2c_get_adapdata(adap); + struct kempld_device_data *pld = i2c->pld; + unsigned long timeout = jiffies + HZ; + int ret; + + i2c->msg = msgs; + i2c->pos = 0; + i2c->nmsgs = num; + i2c->state = STATE_INIT; + + /* Handle the transfer */ + while (time_before(jiffies, timeout)) { + kempld_get_mutex(pld); + ret = kempld_i2c_process(i2c); + kempld_release_mutex(pld); + + if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) + return (i2c->state == STATE_DONE) ? num : ret; + + if (ret == 0) + timeout = jiffies + HZ; + + usleep_range(5, 15); + } + + i2c->state = STATE_ERROR; + + return -ETIMEDOUT; +} + +/* + * kempld_get_mutex must be called prior to calling this function. + */ +static void kempld_i2c_device_init(struct kempld_i2c_data *i2c) +{ + struct kempld_device_data *pld = i2c->pld; + u16 prescale_corr; + long prescale; + u8 ctrl; + u8 stat; + u8 cfg; + + /* Make sure the device is disabled */ + ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL); + ctrl &= ~(I2C_CTRL_EN | I2C_CTRL_IEN); + kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl); + + if (bus_frequency > KEMPLD_I2C_FREQ_MAX) + bus_frequency = KEMPLD_I2C_FREQ_MAX; + + if (pld->info.spec_major == 1) + prescale = pld->pld_clock / bus_frequency * 5 - 1000; + else + prescale = pld->pld_clock / bus_frequency * 4 - 3000; + + if (prescale < 0) + prescale = 0; + + /* Round to the best matching value */ + prescale_corr = prescale / 1000; + if (prescale % 1000 >= 500) + prescale_corr++; + + kempld_write8(pld, KEMPLD_I2C_PRELOW, prescale_corr & 0xff); + kempld_write8(pld, KEMPLD_I2C_PREHIGH, prescale_corr >> 8); + + /* Activate I2C bus output on GPIO pins */ + cfg = kempld_read8(pld, KEMPLD_CFG); + if (i2c_gpio_mux) + cfg |= KEMPLD_CFG_GPIO_I2C_MUX; + else + cfg &= ~KEMPLD_CFG_GPIO_I2C_MUX; + kempld_write8(pld, KEMPLD_CFG, cfg); + + /* Enable the device */ + kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_IACK); + ctrl |= I2C_CTRL_EN; + kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl); + + stat = kempld_read8(pld, KEMPLD_I2C_STAT); + if (stat & I2C_STAT_BUSY) + kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP); +} + +static u32 kempld_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm kempld_i2c_algorithm = { + .master_xfer = kempld_i2c_xfer, + .functionality = kempld_i2c_func, +}; + +static struct i2c_adapter kempld_i2c_adapter = { + .owner = THIS_MODULE, + .name = "i2c-kempld", + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, + .algo = &kempld_i2c_algorithm, +}; + +static int kempld_i2c_probe(struct platform_device *pdev) +{ + struct kempld_device_data *pld = dev_get_drvdata(pdev->dev.parent); + struct kempld_i2c_data *i2c; + int ret; + u8 ctrl; + + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + i2c->pld = pld; + i2c->dev = &pdev->dev; + i2c->adap = kempld_i2c_adapter; + i2c->adap.dev.parent = i2c->dev; + i2c_set_adapdata(&i2c->adap, i2c); + platform_set_drvdata(pdev, i2c); + + kempld_get_mutex(pld); + ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL); + + if (ctrl & I2C_CTRL_EN) + i2c->was_active = true; + + kempld_i2c_device_init(i2c); + kempld_release_mutex(pld); + + /* Add I2C adapter to I2C tree */ + if (i2c_bus >= -1) + i2c->adap.nr = i2c_bus; + ret = i2c_add_numbered_adapter(&i2c->adap); + if (ret) + return ret; + + dev_info(i2c->dev, "I2C bus initialized at %dkHz\n", + bus_frequency); + + return 0; +} + +static int kempld_i2c_remove(struct platform_device *pdev) +{ + struct kempld_i2c_data *i2c = platform_get_drvdata(pdev); + struct kempld_device_data *pld = i2c->pld; + u8 ctrl; + + kempld_get_mutex(pld); + /* + * Disable I2C logic if it was not activated before the + * driver loaded + */ + if (!i2c->was_active) { + ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL); + ctrl &= ~I2C_CTRL_EN; + kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl); + } + kempld_release_mutex(pld); + + i2c_del_adapter(&i2c->adap); + + return 0; +} + +#ifdef CONFIG_PM +static int kempld_i2c_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct kempld_i2c_data *i2c = platform_get_drvdata(pdev); + struct kempld_device_data *pld = i2c->pld; + u8 ctrl; + + kempld_get_mutex(pld); + ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL); + ctrl &= ~I2C_CTRL_EN; + kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl); + kempld_release_mutex(pld); + + return 0; +} + +static int kempld_i2c_resume(struct platform_device *pdev) +{ + struct kempld_i2c_data *i2c = platform_get_drvdata(pdev); + struct kempld_device_data *pld = i2c->pld; + + kempld_get_mutex(pld); + kempld_i2c_device_init(i2c); + kempld_release_mutex(pld); + + return 0; +} +#else +#define kempld_i2c_suspend NULL +#define kempld_i2c_resume NULL +#endif + +static struct platform_driver kempld_i2c_driver = { + .driver = { + .name = "kempld-i2c", + .owner = THIS_MODULE, + }, + .probe = kempld_i2c_probe, + .remove = kempld_i2c_remove, + .suspend = kempld_i2c_suspend, + .resume = kempld_i2c_resume, +}; + +module_platform_driver(kempld_i2c_driver); + +MODULE_DESCRIPTION("KEM PLD I2C Driver"); +MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:kempld_i2c"); diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 5e705ee02f4a..7607dc061918 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -679,7 +679,7 @@ static int fsl_i2c_probe(struct platform_device *op) } dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ); - dev_set_drvdata(&op->dev, i2c); + platform_set_drvdata(op, i2c); i2c->adap = mpc_ops; i2c_set_adapdata(&i2c->adap, i2c); @@ -707,7 +707,7 @@ static int fsl_i2c_probe(struct platform_device *op) static int fsl_i2c_remove(struct platform_device *op) { - struct mpc_i2c *i2c = dev_get_drvdata(&op->dev); + struct mpc_i2c *i2c = platform_get_drvdata(op); i2c_del_adapter(&i2c->adap); diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 1a3abd6a0bfc..b1f42bf40963 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -19,19 +19,15 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/of_irq.h> #include <linux/of_i2c.h> #include <linux/clk.h> #include <linux/err.h> -/* Register defines */ -#define MV64XXX_I2C_REG_SLAVE_ADDR 0x00 -#define MV64XXX_I2C_REG_DATA 0x04 -#define MV64XXX_I2C_REG_CONTROL 0x08 -#define MV64XXX_I2C_REG_STATUS 0x0c -#define MV64XXX_I2C_REG_BAUD 0x0c -#define MV64XXX_I2C_REG_EXT_SLAVE_ADDR 0x10 -#define MV64XXX_I2C_REG_SOFT_RESET 0x1c +#define MV64XXX_I2C_ADDR_ADDR(val) ((val & 0x7f) << 1) +#define MV64XXX_I2C_BAUD_DIV_N(val) (val & 0x7) +#define MV64XXX_I2C_BAUD_DIV_M(val) ((val & 0xf) << 3) #define MV64XXX_I2C_REG_CONTROL_ACK 0x00000004 #define MV64XXX_I2C_REG_CONTROL_IFLG 0x00000008 @@ -85,15 +81,26 @@ enum { MV64XXX_I2C_ACTION_SEND_STOP, }; +struct mv64xxx_i2c_regs { + u8 addr; + u8 ext_addr; + u8 data; + u8 control; + u8 status; + u8 clock; + u8 soft_reset; +}; + struct mv64xxx_i2c_data { + struct i2c_msg *msgs; + int num_msgs; int irq; u32 state; u32 action; u32 aborting; u32 cntl_bits; void __iomem *reg_base; - u32 reg_base_p; - u32 reg_size; + struct mv64xxx_i2c_regs reg_offsets; u32 addr1; u32 addr2; u32 bytes_left; @@ -112,6 +119,52 @@ struct mv64xxx_i2c_data { struct i2c_adapter adapter; }; +static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = { + .addr = 0x00, + .ext_addr = 0x10, + .data = 0x04, + .control = 0x08, + .status = 0x0c, + .clock = 0x0c, + .soft_reset = 0x1c, +}; + +static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_sun4i = { + .addr = 0x00, + .ext_addr = 0x04, + .data = 0x08, + .control = 0x0c, + .status = 0x10, + .clock = 0x14, + .soft_reset = 0x18, +}; + +static void +mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data, + struct i2c_msg *msg) +{ + u32 dir = 0; + + drv_data->msg = msg; + drv_data->byte_posn = 0; + drv_data->bytes_left = msg->len; + drv_data->aborting = 0; + drv_data->rc = 0; + drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK | + MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN; + + if (msg->flags & I2C_M_RD) + dir = 1; + + if (msg->flags & I2C_M_TEN) { + drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir; + drv_data->addr2 = (u32)msg->addr & 0xff; + } else { + drv_data->addr1 = MV64XXX_I2C_ADDR_ADDR((u32)msg->addr) | dir; + drv_data->addr2 = 0; + } +} + /* ***************************************************************************** * @@ -124,13 +177,13 @@ struct mv64xxx_i2c_data { static void mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data) { - writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SOFT_RESET); - writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)), - drv_data->reg_base + MV64XXX_I2C_REG_BAUD); - writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SLAVE_ADDR); - writel(0, drv_data->reg_base + MV64XXX_I2C_REG_EXT_SLAVE_ADDR); + writel(0, drv_data->reg_base + drv_data->reg_offsets.soft_reset); + writel(MV64XXX_I2C_BAUD_DIV_M(drv_data->freq_m) | MV64XXX_I2C_BAUD_DIV_N(drv_data->freq_n), + drv_data->reg_base + drv_data->reg_offsets.clock); + writel(0, drv_data->reg_base + drv_data->reg_offsets.addr); + writel(0, drv_data->reg_base + drv_data->reg_offsets.ext_addr); writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP, - drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->reg_base + drv_data->reg_offsets.control); drv_data->state = MV64XXX_I2C_STATE_IDLE; } @@ -170,7 +223,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status) if ((drv_data->bytes_left == 0) || (drv_data->aborting && (drv_data->byte_posn != 0))) { - if (drv_data->send_stop) { + if (drv_data->send_stop || drv_data->aborting) { drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; drv_data->state = MV64XXX_I2C_STATE_IDLE; } else { @@ -227,7 +280,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status) /* Doesn't seem to be a device at other end */ drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; drv_data->state = MV64XXX_I2C_STATE_IDLE; - drv_data->rc = -ENODEV; + drv_data->rc = -ENXIO; break; default: @@ -247,58 +300,71 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) { switch(drv_data->action) { case MV64XXX_I2C_ACTION_SEND_RESTART: + /* We should only get here if we have further messages */ + BUG_ON(drv_data->num_msgs == 0); + drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START; - drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN; writel(drv_data->cntl_bits, - drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); - drv_data->block = 0; - wake_up(&drv_data->waitq); + drv_data->reg_base + drv_data->reg_offsets.control); + + drv_data->msgs++; + drv_data->num_msgs--; + + /* Setup for the next message */ + mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs); + + /* + * We're never at the start of the message here, and by this + * time it's already too late to do any protocol mangling. + * Thankfully, do not advertise support for that feature. + */ + drv_data->send_stop = drv_data->num_msgs == 1; break; case MV64XXX_I2C_ACTION_CONTINUE: writel(drv_data->cntl_bits, - drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->reg_base + drv_data->reg_offsets.control); break; case MV64XXX_I2C_ACTION_SEND_START: writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START, - drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->reg_base + drv_data->reg_offsets.control); break; case MV64XXX_I2C_ACTION_SEND_ADDR_1: writel(drv_data->addr1, - drv_data->reg_base + MV64XXX_I2C_REG_DATA); + drv_data->reg_base + drv_data->reg_offsets.data); writel(drv_data->cntl_bits, - drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->reg_base + drv_data->reg_offsets.control); break; case MV64XXX_I2C_ACTION_SEND_ADDR_2: writel(drv_data->addr2, - drv_data->reg_base + MV64XXX_I2C_REG_DATA); + drv_data->reg_base + drv_data->reg_offsets.data); writel(drv_data->cntl_bits, - drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->reg_base + drv_data->reg_offsets.control); break; case MV64XXX_I2C_ACTION_SEND_DATA: writel(drv_data->msg->buf[drv_data->byte_posn++], - drv_data->reg_base + MV64XXX_I2C_REG_DATA); + drv_data->reg_base + drv_data->reg_offsets.data); writel(drv_data->cntl_bits, - drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->reg_base + drv_data->reg_offsets.control); break; case MV64XXX_I2C_ACTION_RCV_DATA: drv_data->msg->buf[drv_data->byte_posn++] = - readl(drv_data->reg_base + MV64XXX_I2C_REG_DATA); + readl(drv_data->reg_base + drv_data->reg_offsets.data); writel(drv_data->cntl_bits, - drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->reg_base + drv_data->reg_offsets.control); break; case MV64XXX_I2C_ACTION_RCV_DATA_STOP: drv_data->msg->buf[drv_data->byte_posn++] = - readl(drv_data->reg_base + MV64XXX_I2C_REG_DATA); + readl(drv_data->reg_base + drv_data->reg_offsets.data); drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN; writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP, - drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->reg_base + drv_data->reg_offsets.control); drv_data->block = 0; wake_up(&drv_data->waitq); break; @@ -313,7 +379,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) case MV64XXX_I2C_ACTION_SEND_STOP: drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN; writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP, - drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->reg_base + drv_data->reg_offsets.control); drv_data->block = 0; wake_up(&drv_data->waitq); break; @@ -329,9 +395,9 @@ mv64xxx_i2c_intr(int irq, void *dev_id) irqreturn_t rc = IRQ_NONE; spin_lock_irqsave(&drv_data->lock, flags); - while (readl(drv_data->reg_base + MV64XXX_I2C_REG_CONTROL) & + while (readl(drv_data->reg_base + drv_data->reg_offsets.control) & MV64XXX_I2C_REG_CONTROL_IFLG) { - status = readl(drv_data->reg_base + MV64XXX_I2C_REG_STATUS); + status = readl(drv_data->reg_base + drv_data->reg_offsets.status); mv64xxx_i2c_fsm(drv_data, status); mv64xxx_i2c_do_action(drv_data); rc = IRQ_HANDLED; @@ -349,32 +415,6 @@ mv64xxx_i2c_intr(int irq, void *dev_id) ***************************************************************************** */ static void -mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data, - struct i2c_msg *msg) -{ - u32 dir = 0; - - drv_data->msg = msg; - drv_data->byte_posn = 0; - drv_data->bytes_left = msg->len; - drv_data->aborting = 0; - drv_data->rc = 0; - drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK | - MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN; - - if (msg->flags & I2C_M_RD) - dir = 1; - - if (msg->flags & I2C_M_TEN) { - drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir; - drv_data->addr2 = (u32)msg->addr & 0xff; - } else { - drv_data->addr1 = ((u32)msg->addr & 0x7f) << 1 | dir; - drv_data->addr2 = 0; - } -} - -static void mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data) { long time_left; @@ -414,36 +454,15 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data) static int mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg, - int is_first, int is_last) + int is_last) { unsigned long flags; spin_lock_irqsave(&drv_data->lock, flags); mv64xxx_i2c_prepare_for_io(drv_data, msg); - if (unlikely(msg->flags & I2C_M_NOSTART)) { /* Skip start/addr phases */ - if (drv_data->msg->flags & I2C_M_RD) { - /* No action to do, wait for slave to send a byte */ - drv_data->action = MV64XXX_I2C_ACTION_CONTINUE; - drv_data->state = - MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA; - } else { - drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA; - drv_data->state = - MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK; - drv_data->bytes_left--; - } - } else { - if (is_first) { - drv_data->action = MV64XXX_I2C_ACTION_SEND_START; - drv_data->state = - MV64XXX_I2C_STATE_WAITING_FOR_START_COND; - } else { - drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1; - drv_data->state = - MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK; - } - } + drv_data->action = MV64XXX_I2C_ACTION_SEND_START; + drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND; drv_data->send_stop = is_last; drv_data->block = 1; @@ -471,16 +490,20 @@ static int mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap); - int i, rc; + int rc, ret = num; - for (i = 0; i < num; i++) { - rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[i], - i == 0, i + 1 == num); - if (rc < 0) - return rc; - } + BUG_ON(drv_data->msgs != NULL); + drv_data->msgs = msgs; + drv_data->num_msgs = num; + + rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[0], num == 1); + if (rc < 0) + ret = rc; + + drv_data->num_msgs = 0; + drv_data->msgs = NULL; - return num; + return ret; } static const struct i2c_algorithm mv64xxx_i2c_algo = { @@ -495,39 +518,12 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = { * ***************************************************************************** */ -static int -mv64xxx_i2c_map_regs(struct platform_device *pd, - struct mv64xxx_i2c_data *drv_data) -{ - int size; - struct resource *r = platform_get_resource(pd, IORESOURCE_MEM, 0); - - if (!r) - return -ENODEV; - - size = resource_size(r); - - if (!request_mem_region(r->start, size, drv_data->adapter.name)) - return -EBUSY; - - drv_data->reg_base = ioremap(r->start, size); - drv_data->reg_base_p = r->start; - drv_data->reg_size = size; - - return 0; -} - -static void -mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data) -{ - if (drv_data->reg_base) { - iounmap(drv_data->reg_base); - release_mem_region(drv_data->reg_base_p, drv_data->reg_size); - } - - drv_data->reg_base = NULL; - drv_data->reg_base_p = 0; -} +static const struct of_device_id mv64xxx_i2c_of_match_table[] = { + { .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i}, + { .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx}, + {} +}; +MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table); #ifdef CONFIG_OF static int @@ -562,8 +558,10 @@ mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n, static int mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, - struct device_node *np) + struct device *dev) { + const struct of_device_id *device; + struct device_node *np = dev->of_node; u32 bus_freq, tclk; int rc = 0; @@ -580,7 +578,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, goto out; } tclk = clk_get_rate(drv_data->clk); - of_property_read_u32(np, "clock-frequency", &bus_freq); + + rc = of_property_read_u32(np, "clock-frequency", &bus_freq); + if (rc) + bus_freq = 100000; /* 100kHz by default */ + if (!mv64xxx_find_baud_factors(bus_freq, tclk, &drv_data->freq_n, &drv_data->freq_m)) { rc = -EINVAL; @@ -592,6 +594,13 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, * So hard code the value to 1 second. */ drv_data->adapter.timeout = HZ; + + device = of_match_device(mv64xxx_i2c_of_match_table, dev); + if (!device) + return -ENODEV; + + memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets)); + out: return rc; #endif @@ -599,7 +608,7 @@ out: #else /* CONFIG_OF */ static int mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, - struct device_node *np) + struct device *dev) { return -ENODEV; } @@ -610,19 +619,21 @@ mv64xxx_i2c_probe(struct platform_device *pd) { struct mv64xxx_i2c_data *drv_data; struct mv64xxx_i2c_pdata *pdata = pd->dev.platform_data; + struct resource *r; int rc; if ((!pdata && !pd->dev.of_node)) return -ENODEV; - drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); + drv_data = devm_kzalloc(&pd->dev, sizeof(struct mv64xxx_i2c_data), + GFP_KERNEL); if (!drv_data) return -ENOMEM; - if (mv64xxx_i2c_map_regs(pd, drv_data)) { - rc = -ENODEV; - goto exit_kfree; - } + r = platform_get_resource(pd, IORESOURCE_MEM, 0); + drv_data->reg_base = devm_ioremap_resource(&pd->dev, r); + if (IS_ERR(drv_data->reg_base)) + return PTR_ERR(drv_data->reg_base); strlcpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter", sizeof(drv_data->adapter.name)); @@ -632,7 +643,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) #if defined(CONFIG_HAVE_CLK) /* Not all platforms have a clk */ - drv_data->clk = clk_get(&pd->dev, NULL); + drv_data->clk = devm_clk_get(&pd->dev, NULL); if (!IS_ERR(drv_data->clk)) { clk_prepare(drv_data->clk); clk_enable(drv_data->clk); @@ -643,14 +654,15 @@ mv64xxx_i2c_probe(struct platform_device *pd) drv_data->freq_n = pdata->freq_n; drv_data->irq = platform_get_irq(pd, 0); drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout); + memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets)); } else if (pd->dev.of_node) { - rc = mv64xxx_of_config(drv_data, pd->dev.of_node); + rc = mv64xxx_of_config(drv_data, &pd->dev); if (rc) - goto exit_unmap_regs; + goto exit_clk; } if (drv_data->irq < 0) { rc = -ENXIO; - goto exit_unmap_regs; + goto exit_clk; } drv_data->adapter.dev.parent = &pd->dev; @@ -664,13 +676,13 @@ mv64xxx_i2c_probe(struct platform_device *pd) mv64xxx_i2c_hw_init(drv_data); - if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0, - MV64XXX_I2C_CTLR_NAME, drv_data)) { + rc = request_irq(drv_data->irq, mv64xxx_i2c_intr, 0, + MV64XXX_I2C_CTLR_NAME, drv_data); + if (rc) { dev_err(&drv_data->adapter.dev, - "mv64xxx: Can't register intr handler irq: %d\n", - drv_data->irq); - rc = -EINVAL; - goto exit_unmap_regs; + "mv64xxx: Can't register intr handler irq%d: %d\n", + drv_data->irq, rc); + goto exit_clk; } else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) { dev_err(&drv_data->adapter.dev, "mv64xxx: Can't add i2c adapter, rc: %d\n", -rc); @@ -681,9 +693,9 @@ mv64xxx_i2c_probe(struct platform_device *pd) return 0; - exit_free_irq: - free_irq(drv_data->irq, drv_data); - exit_unmap_regs: +exit_free_irq: + free_irq(drv_data->irq, drv_data); +exit_clk: #if defined(CONFIG_HAVE_CLK) /* Not all platforms have a clk */ if (!IS_ERR(drv_data->clk)) { @@ -691,9 +703,6 @@ mv64xxx_i2c_probe(struct platform_device *pd) clk_unprepare(drv_data->clk); } #endif - mv64xxx_i2c_unmap_regs(drv_data); - exit_kfree: - kfree(drv_data); return rc; } @@ -704,7 +713,6 @@ mv64xxx_i2c_remove(struct platform_device *dev) i2c_del_adapter(&drv_data->adapter); free_irq(drv_data->irq, drv_data); - mv64xxx_i2c_unmap_regs(drv_data); #if defined(CONFIG_HAVE_CLK) /* Not all platforms have a clk */ if (!IS_ERR(drv_data->clk)) { @@ -712,17 +720,10 @@ mv64xxx_i2c_remove(struct platform_device *dev) clk_unprepare(drv_data->clk); } #endif - kfree(drv_data); return 0; } -static const struct of_device_id mv64xxx_i2c_of_match_table[] = { - { .compatible = "marvell,mv64xxx-i2c", }, - {} -}; -MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table); - static struct platform_driver mv64xxx_i2c_driver = { .probe = mv64xxx_i2c_probe, .remove = mv64xxx_i2c_remove, diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 2039f230482d..df8ff5aea5b5 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -24,7 +24,6 @@ #include <linux/platform_device.h> #include <linux/jiffies.h> #include <linux/io.h> -#include <linux/pinctrl/consumer.h> #include <linux/stmp_device.h> #include <linux/of.h> #include <linux/of_device.h> @@ -638,15 +637,10 @@ static int mxs_i2c_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct mxs_i2c_dev *i2c; struct i2c_adapter *adap; - struct pinctrl *pinctrl; struct resource *res; resource_size_t res_size; int err, irq; - pinctrl = devm_pinctrl_get_select_default(dev); - if (IS_ERR(pinctrl)) - return PTR_ERR(pinctrl); - i2c = devm_kzalloc(dev, sizeof(struct mxs_i2c_dev), GFP_KERNEL); if (!i2c) return -ENOMEM; diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index c7e3b0c1a1ca..512dfe609706 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/amba/bus.h> -#include <linux/atomic.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/i2c.h> @@ -106,6 +105,16 @@ /* maximum threshold value */ #define MAX_I2C_FIFO_THRESHOLD 15 +/** + * struct i2c_vendor_data - per-vendor variations + * @has_mtdws: variant has the MTDWS bit + * @fifodepth: variant FIFO depth + */ +struct i2c_vendor_data { + bool has_mtdws; + u32 fifodepth; +}; + enum i2c_status { I2C_NOP, I2C_ON_GOING, @@ -138,6 +147,7 @@ struct i2c_nmk_client { /** * struct nmk_i2c_dev - private data structure of the controller. + * @vendor: vendor data for this variant. * @adev: parent amba device. * @adap: corresponding I2C adapter. * @irq: interrupt line for the controller. @@ -151,6 +161,7 @@ struct i2c_nmk_client { * @busy: Busy doing transfer. */ struct nmk_i2c_dev { + struct i2c_vendor_data *vendor; struct amba_device *adev; struct i2c_adapter adap; int irq; @@ -422,7 +433,7 @@ static int read_i2c(struct nmk_i2c_dev *dev, u16 flags) irq_mask = (I2C_IT_RXFNF | I2C_IT_RXFF | I2C_IT_MAL | I2C_IT_BERR); - if (dev->stop) + if (dev->stop || !dev->vendor->has_mtdws) irq_mask |= I2C_IT_MTD; else irq_mask |= I2C_IT_MTDWS; @@ -502,7 +513,7 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags) * set the MTDWS bit (Master Transaction Done Without Stop) * to start repeated start operation */ - if (dev->stop) + if (dev->stop || !dev->vendor->has_mtdws) irq_mask |= I2C_IT_MTD; else irq_mask |= I2C_IT_MTDWS; @@ -929,8 +940,6 @@ static void nmk_i2c_of_probe(struct device_node *np, pdata->sm = I2C_FREQ_MODE_FAST; } -static atomic_t adapter_id = ATOMIC_INIT(0); - static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) { int ret = 0; @@ -938,6 +947,8 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) struct device_node *np = adev->dev.of_node; struct nmk_i2c_dev *dev; struct i2c_adapter *adap; + struct i2c_vendor_data *vendor = id->data; + u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1; if (!pdata) { if (np) { @@ -954,12 +965,25 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) pdata = &u8500_i2c; } + if (pdata->tft > max_fifo_threshold) { + dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n", + pdata->tft, max_fifo_threshold); + pdata->tft = max_fifo_threshold; + } + + if (pdata->rft > max_fifo_threshold) { + dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n", + pdata->rft, max_fifo_threshold); + pdata->rft = max_fifo_threshold; + } + dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL); if (!dev) { dev_err(&adev->dev, "cannot allocate memory\n"); ret = -ENOMEM; goto err_no_mem; } + dev->vendor = vendor; dev->busy = false; dev->adev = adev; amba_set_drvdata(adev, dev); @@ -999,10 +1023,8 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->algo = &nmk_i2c_algo; adap->timeout = msecs_to_jiffies(pdata->timeout); - adap->nr = atomic_read(&adapter_id); snprintf(adap->name, sizeof(adap->name), - "Nomadik I2C%d at %pR", adap->nr, &adev->res); - atomic_inc(&adapter_id); + "Nomadik I2C at %pR", &adev->res); /* fetch the controller configuration from machine */ dev->cfg.clk_freq = pdata->clk_freq; @@ -1017,7 +1039,7 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) "initialize %s on virtual base %p\n", adap->name, dev->virtbase); - ret = i2c_add_numbered_adapter(adap); + ret = i2c_add_adapter(adap); if (ret) { dev_err(&adev->dev, "failed to add adapter\n"); goto err_add_adap; @@ -1064,14 +1086,26 @@ static int nmk_i2c_remove(struct amba_device *adev) return 0; } +static struct i2c_vendor_data vendor_stn8815 = { + .has_mtdws = false, + .fifodepth = 16, /* Guessed from TFTR/RFTR = 7 */ +}; + +static struct i2c_vendor_data vendor_db8500 = { + .has_mtdws = true, + .fifodepth = 32, /* Guessed from TFTR/RFTR = 15 */ +}; + static struct amba_id nmk_i2c_ids[] = { { .id = 0x00180024, .mask = 0x00ffffff, + .data = &vendor_stn8815, }, { .id = 0x00380024, .mask = 0x00ffffff, + .data = &vendor_db8500, }, {}, }; diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index e02f9e36a7b2..142b694d1c60 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -180,6 +180,8 @@ enum { #define I2C_OMAP_ERRATA_I207 (1 << 0) #define I2C_OMAP_ERRATA_I462 (1 << 1) +#define OMAP_I2C_IP_V2_INTERRUPTS_MASK 0x6FFF + struct omap_i2c_dev { spinlock_t lock; /* IRQ synchronization */ struct device *dev; @@ -193,6 +195,7 @@ struct omap_i2c_dev { long latency); u32 speed; /* Speed of bus in kHz */ u32 flags; + u16 scheme; u16 cmd_err; u8 *buf; u8 *regs; @@ -1082,14 +1085,7 @@ omap_i2c_probe(struct platform_device *pdev) int irq; int r; u32 rev; - u16 minor, major, scheme; - - /* NOTE: driver uses the static register mapping */ - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "no mem resource?\n"); - return -ENODEV; - } + u16 minor, major; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -1103,6 +1099,7 @@ omap_i2c_probe(struct platform_device *pdev) return -ENOMEM; } + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); dev->base = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(dev->base)) return PTR_ERR(dev->base); @@ -1159,8 +1156,8 @@ omap_i2c_probe(struct platform_device *pdev) */ rev = __raw_readw(dev->base + 0x04); - scheme = OMAP_I2C_SCHEME(rev); - switch (scheme) { + dev->scheme = OMAP_I2C_SCHEME(rev); + switch (dev->scheme) { case OMAP_I2C_SCHEME_0: dev->regs = (u8 *)reg_map_ip_v1; dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG); @@ -1289,7 +1286,11 @@ static int omap_i2c_runtime_suspend(struct device *dev) _dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG); - omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0); + if (_dev->scheme == OMAP_I2C_SCHEME_0) + omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0); + else + omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, + OMAP_I2C_IP_V2_INTERRUPTS_MASK); if (_dev->rev < OMAP_I2C_OMAP1_REV_2) { omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */ diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index ea6d45d1dcd6..fbafed29fb81 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1160,7 +1160,7 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.class = plat->class; } - clk_enable(i2c->clk); + clk_prepare_enable(i2c->clk); if (i2c->use_pio) { i2c->adap.algo = &i2c_pxa_pio_algorithm; @@ -1202,7 +1202,7 @@ eadapt: if (!i2c->use_pio) free_irq(irq, i2c); ereqirq: - clk_disable(i2c->clk); + clk_disable_unprepare(i2c->clk); iounmap(i2c->reg_base); eremap: clk_put(i2c->clk); @@ -1221,7 +1221,7 @@ static int i2c_pxa_remove(struct platform_device *dev) if (!i2c->use_pio) free_irq(i2c->irq, i2c); - clk_disable(i2c->clk); + clk_disable_unprepare(i2c->clk); clk_put(i2c->clk); iounmap(i2c->reg_base); diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 4ba4a95b6b26..0fc585861610 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -623,12 +623,6 @@ static int rcar_i2c_probe(struct platform_device *pdev) u32 bus_speed; int ret; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "no mmio resources\n"); - return -ENODEV; - } - priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL); if (!priv) { dev_err(dev, "no mem for private data\n"); @@ -642,6 +636,7 @@ static int rcar_i2c_probe(struct platform_device *pdev) if (ret < 0) return ret; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->io = devm_ioremap_resource(dev, res); if (IS_ERR(priv->io)) return PTR_ERR(priv->io); diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c new file mode 100644 index 000000000000..baaa7d15b73e --- /dev/null +++ b/drivers/i2c/busses/i2c-wmt.c @@ -0,0 +1,479 @@ +/* + * Wondermedia I2C Master Mode Driver + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Derived from GPLv2+ licensed source: + * - Copyright (C) 2008 WonderMedia Technologies, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, or + * (at your option) any later version. as published by the Free Software + * Foundation + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_i2c.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> + +#define REG_CR 0x00 +#define REG_TCR 0x02 +#define REG_CSR 0x04 +#define REG_ISR 0x06 +#define REG_IMR 0x08 +#define REG_CDR 0x0A +#define REG_TR 0x0C +#define REG_MCR 0x0E +#define REG_SLAVE_CR 0x10 +#define REG_SLAVE_SR 0x12 +#define REG_SLAVE_ISR 0x14 +#define REG_SLAVE_IMR 0x16 +#define REG_SLAVE_DR 0x18 +#define REG_SLAVE_TR 0x1A + +/* REG_CR Bit fields */ +#define CR_TX_NEXT_ACK 0x0000 +#define CR_ENABLE 0x0001 +#define CR_TX_NEXT_NO_ACK 0x0002 +#define CR_TX_END 0x0004 +#define CR_CPU_RDY 0x0008 +#define SLAV_MODE_SEL 0x8000 + +/* REG_TCR Bit fields */ +#define TCR_STANDARD_MODE 0x0000 +#define TCR_MASTER_WRITE 0x0000 +#define TCR_HS_MODE 0x2000 +#define TCR_MASTER_READ 0x4000 +#define TCR_FAST_MODE 0x8000 +#define TCR_SLAVE_ADDR_MASK 0x007F + +/* REG_ISR Bit fields */ +#define ISR_NACK_ADDR 0x0001 +#define ISR_BYTE_END 0x0002 +#define ISR_SCL_TIMEOUT 0x0004 +#define ISR_WRITE_ALL 0x0007 + +/* REG_IMR Bit fields */ +#define IMR_ENABLE_ALL 0x0007 + +/* REG_CSR Bit fields */ +#define CSR_RCV_NOT_ACK 0x0001 +#define CSR_RCV_ACK_MASK 0x0001 +#define CSR_READY_MASK 0x0002 + +/* REG_TR */ +#define SCL_TIMEOUT(x) (((x) & 0xFF) << 8) +#define TR_STD 0x0064 +#define TR_HS 0x0019 + +/* REG_MCR */ +#define MCR_APB_96M 7 +#define MCR_APB_166M 12 + +#define I2C_MODE_STANDARD 0 +#define I2C_MODE_FAST 1 + +#define WMT_I2C_TIMEOUT (msecs_to_jiffies(1000)) + +struct wmt_i2c_dev { + struct i2c_adapter adapter; + struct completion complete; + struct device *dev; + void __iomem *base; + struct clk *clk; + int mode; + int irq; + u16 cmd_status; +}; + +static int wmt_i2c_wait_bus_not_busy(struct wmt_i2c_dev *i2c_dev) +{ + unsigned long timeout; + + timeout = jiffies + WMT_I2C_TIMEOUT; + while (!(readw(i2c_dev->base + REG_CSR) & CSR_READY_MASK)) { + if (time_after(jiffies, timeout)) { + dev_warn(i2c_dev->dev, "timeout waiting for bus ready\n"); + return -EBUSY; + } + msleep(20); + } + + return 0; +} + +static int wmt_check_status(struct wmt_i2c_dev *i2c_dev) +{ + int ret = 0; + + if (i2c_dev->cmd_status & ISR_NACK_ADDR) + ret = -EIO; + + if (i2c_dev->cmd_status & ISR_SCL_TIMEOUT) + ret = -ETIMEDOUT; + + return ret; +} + +static int wmt_i2c_write(struct i2c_adapter *adap, struct i2c_msg *pmsg, + int last) +{ + struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap); + u16 val, tcr_val; + int ret, wait_result; + int xfer_len = 0; + + if (!(pmsg->flags & I2C_M_NOSTART)) { + ret = wmt_i2c_wait_bus_not_busy(i2c_dev); + if (ret < 0) + return ret; + } + + if (pmsg->len == 0) { + /* + * We still need to run through the while (..) once, so + * start at -1 and break out early from the loop + */ + xfer_len = -1; + writew(0, i2c_dev->base + REG_CDR); + } else { + writew(pmsg->buf[0] & 0xFF, i2c_dev->base + REG_CDR); + } + + if (!(pmsg->flags & I2C_M_NOSTART)) { + val = readw(i2c_dev->base + REG_CR); + val &= ~CR_TX_END; + writew(val, i2c_dev->base + REG_CR); + + val = readw(i2c_dev->base + REG_CR); + val |= CR_CPU_RDY; + writew(val, i2c_dev->base + REG_CR); + } + + INIT_COMPLETION(i2c_dev->complete); + + if (i2c_dev->mode == I2C_MODE_STANDARD) + tcr_val = TCR_STANDARD_MODE; + else + tcr_val = TCR_FAST_MODE; + + tcr_val |= (TCR_MASTER_WRITE | (pmsg->addr & TCR_SLAVE_ADDR_MASK)); + + writew(tcr_val, i2c_dev->base + REG_TCR); + + if (pmsg->flags & I2C_M_NOSTART) { + val = readw(i2c_dev->base + REG_CR); + val |= CR_CPU_RDY; + writew(val, i2c_dev->base + REG_CR); + } + + while (xfer_len < pmsg->len) { + wait_result = wait_for_completion_timeout(&i2c_dev->complete, + 500 * HZ / 1000); + + if (wait_result == 0) + return -ETIMEDOUT; + + ret = wmt_check_status(i2c_dev); + if (ret) + return ret; + + xfer_len++; + + val = readw(i2c_dev->base + REG_CSR); + if ((val & CSR_RCV_ACK_MASK) == CSR_RCV_NOT_ACK) { + dev_dbg(i2c_dev->dev, "write RCV NACK error\n"); + return -EIO; + } + + if (pmsg->len == 0) { + val = CR_TX_END | CR_CPU_RDY | CR_ENABLE; + writew(val, i2c_dev->base + REG_CR); + break; + } + + if (xfer_len == pmsg->len) { + if (last != 1) + writew(CR_ENABLE, i2c_dev->base + REG_CR); + } else { + writew(pmsg->buf[xfer_len] & 0xFF, i2c_dev->base + + REG_CDR); + writew(CR_CPU_RDY | CR_ENABLE, i2c_dev->base + REG_CR); + } + } + + return 0; +} + +static int wmt_i2c_read(struct i2c_adapter *adap, struct i2c_msg *pmsg, + int last) +{ + struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap); + u16 val, tcr_val; + int ret, wait_result; + u32 xfer_len = 0; + + if (!(pmsg->flags & I2C_M_NOSTART)) { + ret = wmt_i2c_wait_bus_not_busy(i2c_dev); + if (ret < 0) + return ret; + } + + val = readw(i2c_dev->base + REG_CR); + val &= ~CR_TX_END; + writew(val, i2c_dev->base + REG_CR); + + val = readw(i2c_dev->base + REG_CR); + val &= ~CR_TX_NEXT_NO_ACK; + writew(val, i2c_dev->base + REG_CR); + + if (!(pmsg->flags & I2C_M_NOSTART)) { + val = readw(i2c_dev->base + REG_CR); + val |= CR_CPU_RDY; + writew(val, i2c_dev->base + REG_CR); + } + + if (pmsg->len == 1) { + val = readw(i2c_dev->base + REG_CR); + val |= CR_TX_NEXT_NO_ACK; + writew(val, i2c_dev->base + REG_CR); + } + + INIT_COMPLETION(i2c_dev->complete); + + if (i2c_dev->mode == I2C_MODE_STANDARD) + tcr_val = TCR_STANDARD_MODE; + else + tcr_val = TCR_FAST_MODE; + + tcr_val |= TCR_MASTER_READ | (pmsg->addr & TCR_SLAVE_ADDR_MASK); + + writew(tcr_val, i2c_dev->base + REG_TCR); + + if (pmsg->flags & I2C_M_NOSTART) { + val = readw(i2c_dev->base + REG_CR); + val |= CR_CPU_RDY; + writew(val, i2c_dev->base + REG_CR); + } + + while (xfer_len < pmsg->len) { + wait_result = wait_for_completion_timeout(&i2c_dev->complete, + 500 * HZ / 1000); + + if (!wait_result) + return -ETIMEDOUT; + + ret = wmt_check_status(i2c_dev); + if (ret) + return ret; + + pmsg->buf[xfer_len] = readw(i2c_dev->base + REG_CDR) >> 8; + xfer_len++; + + if (xfer_len == pmsg->len - 1) { + val = readw(i2c_dev->base + REG_CR); + val |= (CR_TX_NEXT_NO_ACK | CR_CPU_RDY); + writew(val, i2c_dev->base + REG_CR); + } else { + val = readw(i2c_dev->base + REG_CR); + val |= CR_CPU_RDY; + writew(val, i2c_dev->base + REG_CR); + } + } + + return 0; +} + +static int wmt_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg msgs[], + int num) +{ + struct i2c_msg *pmsg; + int i, is_last; + int ret = 0; + + for (i = 0; ret >= 0 && i < num; i++) { + is_last = ((i + 1) == num); + + pmsg = &msgs[i]; + if (pmsg->flags & I2C_M_RD) + ret = wmt_i2c_read(adap, pmsg, is_last); + else + ret = wmt_i2c_write(adap, pmsg, is_last); + } + + return (ret < 0) ? ret : i; +} + +static u32 wmt_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART; +} + +static const struct i2c_algorithm wmt_i2c_algo = { + .master_xfer = wmt_i2c_xfer, + .functionality = wmt_i2c_func, +}; + +static irqreturn_t wmt_i2c_isr(int irq, void *data) +{ + struct wmt_i2c_dev *i2c_dev = data; + + /* save the status and write-clear it */ + i2c_dev->cmd_status = readw(i2c_dev->base + REG_ISR); + writew(i2c_dev->cmd_status, i2c_dev->base + REG_ISR); + + complete(&i2c_dev->complete); + + return IRQ_HANDLED; +} + +static int wmt_i2c_reset_hardware(struct wmt_i2c_dev *i2c_dev) +{ + int err; + + err = clk_prepare_enable(i2c_dev->clk); + if (err) { + dev_err(i2c_dev->dev, "failed to enable clock\n"); + return err; + } + + err = clk_set_rate(i2c_dev->clk, 20000000); + if (err) { + dev_err(i2c_dev->dev, "failed to set clock = 20Mhz\n"); + return err; + } + + writew(0, i2c_dev->base + REG_CR); + writew(MCR_APB_166M, i2c_dev->base + REG_MCR); + writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR); + writew(IMR_ENABLE_ALL, i2c_dev->base + REG_IMR); + writew(CR_ENABLE, i2c_dev->base + REG_CR); + readw(i2c_dev->base + REG_CSR); /* read clear */ + writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR); + + if (i2c_dev->mode == I2C_MODE_STANDARD) + writew(SCL_TIMEOUT(128) | TR_STD, i2c_dev->base + REG_TR); + else + writew(SCL_TIMEOUT(128) | TR_HS, i2c_dev->base + REG_TR); + + return 0; +} + +static int wmt_i2c_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct wmt_i2c_dev *i2c_dev; + struct i2c_adapter *adap; + struct resource *res; + int err; + u32 clk_rate; + + i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); + if (!i2c_dev) { + dev_err(&pdev->dev, "device memory allocation failed\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + i2c_dev->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(i2c_dev->base)) + return PTR_ERR(i2c_dev->base); + + i2c_dev->irq = irq_of_parse_and_map(np, 0); + if (!i2c_dev->irq) { + dev_err(&pdev->dev, "irq missing or invalid\n"); + return -EINVAL; + } + + i2c_dev->clk = of_clk_get(np, 0); + if (IS_ERR(i2c_dev->clk)) { + dev_err(&pdev->dev, "unable to request clock\n"); + return PTR_ERR(i2c_dev->clk); + } + + i2c_dev->mode = I2C_MODE_STANDARD; + err = of_property_read_u32(np, "clock-frequency", &clk_rate); + if ((!err) && (clk_rate == 400000)) + i2c_dev->mode = I2C_MODE_FAST; + + i2c_dev->dev = &pdev->dev; + + err = devm_request_irq(&pdev->dev, i2c_dev->irq, wmt_i2c_isr, 0, + "i2c", i2c_dev); + if (err) { + dev_err(&pdev->dev, "failed to request irq %i\n", i2c_dev->irq); + return err; + } + + adap = &i2c_dev->adapter; + i2c_set_adapdata(adap, i2c_dev); + strlcpy(adap->name, "WMT I2C adapter", sizeof(adap->name)); + adap->owner = THIS_MODULE; + adap->algo = &wmt_i2c_algo; + adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; + + init_completion(&i2c_dev->complete); + + err = wmt_i2c_reset_hardware(i2c_dev); + if (err) { + dev_err(&pdev->dev, "error initializing hardware\n"); + return err; + } + + err = i2c_add_adapter(adap); + if (err) { + dev_err(&pdev->dev, "failed to add adapter\n"); + return err; + } + + platform_set_drvdata(pdev, i2c_dev); + + of_i2c_register_devices(adap); + + return 0; +} + +static int wmt_i2c_remove(struct platform_device *pdev) +{ + struct wmt_i2c_dev *i2c_dev = platform_get_drvdata(pdev); + + /* Disable interrupts, clock and delete adapter */ + writew(0, i2c_dev->base + REG_IMR); + clk_disable_unprepare(i2c_dev->clk); + i2c_del_adapter(&i2c_dev->adapter); + + return 0; +} + +static struct of_device_id wmt_i2c_dt_ids[] = { + { .compatible = "wm,wm8505-i2c" }, + { /* Sentinel */ }, +}; + +static struct platform_driver wmt_i2c_driver = { + .probe = wmt_i2c_probe, + .remove = wmt_i2c_remove, + .driver = { + .name = "wmt-i2c", + .owner = THIS_MODULE, + .of_match_table = wmt_i2c_dt_ids, + }, +}; + +module_platform_driver(wmt_i2c_driver); + +MODULE_DESCRIPTION("Wondermedia I2C master-mode bus adapter"); +MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(of, wmt_i2c_dt_ids); |
