ARM: dts: Add node labels to exynos5420

Adding labels to nodes which do not have it yet in exynos5420.
This is done so as to use reference based node updation in board
files.

Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

1 files changed, 13 insertions, 13 deletions

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index c3a9a66c5767..0d1dea81af0c 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -125,7 +125,7 @@
 		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
 	};
 
-	codec@11000000 {
+	mfc: codec@11000000 {
 		compatible = "samsung,mfc-v7";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
@@ -169,7 +169,7 @@
 		status = "disabled";
 	};
 
-	mct@101C0000 {
+	mct: mct@101C0000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x101C0000 0x800>;
 		interrupt-controller;
@@ -270,7 +270,7 @@
 		interrupts = <0 47 0>;
 	};
 
-	rtc@101E0000 {
+	rtc: rtc@101E0000 {
 		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "disabled";
@@ -430,22 +430,22 @@
 		status = "disabled";
 	};
 
-	serial@12C00000 {
+	uart_0: serial@12C00000 {
 		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	serial@12C10000 {
+	uart_1: serial@12C10000 {
 		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	serial@12C20000 {
+	uart_2: serial@12C20000 {
 		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	serial@12C30000 {
+	uart_3: serial@12C30000 {
 		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
@@ -465,14 +465,14 @@
 		#phy-cells = <0>;
 	};
 
-	dp-controller@145B0000 {
+	dp: dp-controller@145B0000 {
 		clocks = <&clock CLK_DP1>;
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
 	};
 
-	fimd@14400000 {
+	fimd: fimd@14400000 {
 		samsung,power-domain = <&disp_pd>;
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
@@ -632,7 +632,7 @@
 		status = "disabled";
 	};
 
-	hdmi@14530000 {
+	hdmi: hdmi@14530000 {
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
@@ -644,7 +644,7 @@
 		status = "disabled";
 	};
 
-	mixer@14450000 {
+	mixer: mixer@14450000 {
 		compatible = "samsung,exynos5420-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
@@ -715,7 +715,7 @@
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
 	};
 
-        watchdog@101D0000 {
+        watchdog: watchdog@101D0000 {
 		compatible = "samsung,exynos5420-wdt";
 		reg = <0x101D0000 0x100>;
 		interrupts = <0 42 0>;
@@ -724,7 +724,7 @@
 		samsung,syscon-phandle = <&pmu_system_controller>;
         };
 
-	sss@10830000 {
+	sss: sss@10830000 {
 		compatible = "samsung,exynos4210-secss";
 		reg = <0x10830000 0x10000>;
 		interrupts = <0 112 0>;