diff options
author | Guennadi Liakhovetski <g.liakhovetski@gmx.de> | 2012-06-20 19:10:31 +0200 |
---|---|---|
committer | Chris Ball <cjb@laptop.org> | 2012-07-21 00:02:10 -0400 |
commit | 8c102a964655b1a8df41b1f9e2355657471a45e3 (patch) | |
tree | ff3ffd32443eaea512d9cfbb1df99d005cabe6ec | |
parent | e0337cc8b02fcb3f725746735db84d6d1b6b9196 (diff) | |
download | blackbird-op-linux-8c102a964655b1a8df41b1f9e2355657471a45e3.tar.gz blackbird-op-linux-8c102a964655b1a8df41b1f9e2355657471a45e3.zip |
mmc: tmio: add callbacks to enable-update and disable the interface clock
Every time the clock is enabled after possibly being disabled, we have
to re-read its frequency and update our configuration.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
-rw-r--r-- | drivers/mmc/host/tmio_mmc_pio.c | 35 | ||||
-rw-r--r-- | include/linux/mfd/tmio.h | 3 |
2 files changed, 35 insertions, 3 deletions
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 4318c1a74ba0..c6c0334a20e1 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -752,6 +752,22 @@ fail: mmc_request_done(mmc, mrq); } +static int tmio_mmc_clk_update(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + struct tmio_mmc_data *pdata = host->pdata; + int ret; + + if (!pdata->clk_enable) + return -ENOTSUPP; + + ret = pdata->clk_enable(host->pdev, &mmc->f_max); + if (!ret) + mmc->f_min = mmc->f_max / 512; + + return ret; +} + /* Set MMC clock / power. * Note: This controller uses a simple divider scheme therefore it cannot * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as @@ -798,6 +814,7 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) */ if (ios->power_mode == MMC_POWER_ON && ios->clock) { if (!host->power) { + tmio_mmc_clk_update(mmc); pm_runtime_get_sync(dev); host->power = true; } @@ -811,9 +828,12 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->set_pwr && ios->power_mode == MMC_POWER_OFF) host->set_pwr(host->pdev, 0); if (host->power) { + struct tmio_mmc_data *pdata = host->pdata; tmio_mmc_clk_stop(host); host->power = false; pm_runtime_put(dev); + if (pdata->clk_disable) + pdata->clk_disable(host->pdev); } } @@ -907,8 +927,6 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, mmc->ops = &tmio_mmc_ops; mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities; - mmc->f_max = pdata->hclk; - mmc->f_min = mmc->f_max / 512; mmc->max_segs = 32; mmc->max_blk_size = 512; mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) * @@ -930,6 +948,11 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, if (ret < 0) goto pm_disable; + if (tmio_mmc_clk_update(mmc) < 0) { + mmc->f_max = pdata->hclk; + mmc->f_min = mmc->f_max / 512; + } + /* * There are 4 different scenarios for the card detection: * 1) an external gpio irq handles the cd (best for power savings) @@ -975,7 +998,13 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, /* See if we also get DMA */ tmio_mmc_request_dma(_host, pdata); - mmc_add_host(mmc); + ret = mmc_add_host(mmc); + if (pdata->clk_disable) + pdata->clk_disable(pdev); + if (ret < 0) { + tmio_mmc_host_remove(_host); + return ret; + } dev_pm_qos_expose_latency_limit(&pdev->dev, 100); diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index f5171dbf8850..b332c4c7857b 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -110,6 +110,9 @@ struct tmio_mmc_data { void (*set_clk_div)(struct platform_device *host, int state); int (*get_cd)(struct platform_device *host); int (*write16_hook)(struct tmio_mmc_host *host, int addr); + /* clock management callbacks */ + int (*clk_enable)(struct platform_device *pdev, unsigned int *f); + void (*clk_disable)(struct platform_device *pdev); }; /* |