Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux

* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (49 commits)
  OMAP: DSS2: Taal: Fix TE when resuming
  OMAP: DSS2: Taal: Fix ESD check
  OMAP: DSS2: OMAPFB: Constify some function parameters
  OMAP: DSS2: OMAPFB: install omapfb.h
  OMAP: DSS2: DSI: add error prints
  OMAP: DSS2: TPO-TD03MTEA1: fix function names
  OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helper
  OMAP: DSS2: OMAPFB: Remove FB_OMAP2_FORCE_AUTO_UPDATE
  OMAP: DSS2: DSI: remove external TE support
  OMAP: DSS2: move timing functions
  OMAP: DSS2: move set/get_wss()
  OMAP: DSS2: move enable/disable/suspend/resume
  OMAP: DSS2: move update() and sync()
  OMAP: DSS2: move set/get_update_mode()
  OMAP: DSS2: move enable/get_te()
  OMAP: DSS2: move get_recommended_bpp()
  OMAP: DSS2: move get_resolution()
  OMAP: DSS2: move enable/disable_channel to overlay manager
  OMAP: DSS2: move wait_vsync()
  OMAP: DSS2: move get/set_rotate()
  ...

31 files changed, 2186 insertions, 1840 deletions

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index f312b1513753..a101029ceb6f 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -542,10 +542,6 @@ static struct regulator_init_data sdp3430_vdac = {
 /* VPLL2 for digital video outputs */
 static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
 	{
-		.supply		= "vdvi",
-		.dev		= &sdp3430_lcd_device.dev,
-	},
-	{
 		.supply		= "vdds_dsi",
 		.dev		= &sdp3430_dss_device.dev,
 	}
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
index c66e464732df..1c529ce9dc11 100644
--- a/arch/arm/plat-omap/include/plat/display.h
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -233,8 +233,12 @@ int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
 void dsi_bus_lock(void);
 void dsi_bus_unlock(void);
 int dsi_vc_dcs_write(int channel, u8 *data, int len);
+int dsi_vc_dcs_write_0(int channel, u8 dcs_cmd);
+int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param);
 int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
 int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
+int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data);
+int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data);
 int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
 int dsi_vc_send_null(int channel);
 int dsi_vc_send_bta_sync(int channel);
@@ -367,6 +371,10 @@ struct omap_overlay_manager {
 
 	int (*apply)(struct omap_overlay_manager *mgr);
 	int (*wait_for_go)(struct omap_overlay_manager *mgr);
+	int (*wait_for_vsync)(struct omap_overlay_manager *mgr);
+
+	int (*enable)(struct omap_overlay_manager *mgr);
+	int (*disable)(struct omap_overlay_manager *mgr);
 };
 
 struct omap_dss_device {
@@ -426,16 +434,11 @@ struct omap_dss_device {
 		int acb;	/* ac-bias pin frequency */
 
 		enum omap_panel_config config;
-
-		u8 recommended_bpp;
-
-		struct omap_dss_device *ctrl;
 	} panel;
 
 	struct {
 		u8 pixel_size;
 		struct rfbi_timings rfbi_timings;
-		struct omap_dss_device *panel;
 	} ctrl;
 
 	int reset_gpio;
@@ -460,49 +463,6 @@ struct omap_dss_device {
 
 	enum omap_dss_display_state state;
 
-	int (*enable)(struct omap_dss_device *dssdev);
-	void (*disable)(struct omap_dss_device *dssdev);
-
-	int (*suspend)(struct omap_dss_device *dssdev);
-	int (*resume)(struct omap_dss_device *dssdev);
-
-	void (*get_resolution)(struct omap_dss_device *dssdev,
-			u16 *xres, u16 *yres);
-	int (*get_recommended_bpp)(struct omap_dss_device *dssdev);
-
-	int (*check_timings)(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings);
-	void (*set_timings)(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings);
-	void (*get_timings)(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings);
-	int (*update)(struct omap_dss_device *dssdev,
-			       u16 x, u16 y, u16 w, u16 h);
-	int (*sync)(struct omap_dss_device *dssdev);
-	int (*wait_vsync)(struct omap_dss_device *dssdev);
-
-	int (*set_update_mode)(struct omap_dss_device *dssdev,
-			enum omap_dss_update_mode);
-	enum omap_dss_update_mode (*get_update_mode)
-		(struct omap_dss_device *dssdev);
-
-	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
-	int (*get_te)(struct omap_dss_device *dssdev);
-
-	u8 (*get_rotate)(struct omap_dss_device *dssdev);
-	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
-
-	bool (*get_mirror)(struct omap_dss_device *dssdev);
-	int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
-
-	int (*run_test)(struct omap_dss_device *dssdev, int test);
-	int (*memory_read)(struct omap_dss_device *dssdev,
-			void *buf, size_t size,
-			u16 x, u16 y, u16 w, u16 h);
-
-	int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
-	u32 (*get_wss)(struct omap_dss_device *dssdev);
-
 	/* platform specific  */
 	int (*platform_enable)(struct omap_dss_device *dssdev);
 	void (*platform_disable)(struct omap_dss_device *dssdev);
@@ -522,11 +482,17 @@ struct omap_dss_driver {
 	int (*resume)(struct omap_dss_device *display);
 	int (*run_test)(struct omap_dss_device *display, int test);
 
-	void (*setup_update)(struct omap_dss_device *dssdev,
-			u16 x, u16 y, u16 w, u16 h);
+	int (*set_update_mode)(struct omap_dss_device *dssdev,
+			enum omap_dss_update_mode);
+	enum omap_dss_update_mode (*get_update_mode)(
+			struct omap_dss_device *dssdev);
+
+	int (*update)(struct omap_dss_device *dssdev,
+			       u16 x, u16 y, u16 w, u16 h);
+	int (*sync)(struct omap_dss_device *dssdev);
 
 	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
-	int (*wait_for_te)(struct omap_dss_device *dssdev);
+	int (*get_te)(struct omap_dss_device *dssdev);
 
 	u8 (*get_rotate)(struct omap_dss_device *dssdev);
 	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
@@ -537,6 +503,20 @@ struct omap_dss_driver {
 	int (*memory_read)(struct omap_dss_device *dssdev,
 			void *buf, size_t size,
 			u16 x, u16 y, u16 w, u16 h);
+
+	void (*get_resolution)(struct omap_dss_device *dssdev,
+			u16 *xres, u16 *yres);
+	int (*get_recommended_bpp)(struct omap_dss_device *dssdev);
+
+	int (*check_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*set_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*get_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+
+	int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
+	u32 (*get_wss)(struct omap_dss_device *dssdev);
 };
 
 int omap_dss_register_driver(struct omap_dss_driver *);
@@ -561,6 +541,10 @@ struct omap_overlay_manager *omap_dss_get_overlay_manager(int num);
 int omap_dss_get_num_overlays(void);
 struct omap_overlay *omap_dss_get_overlay(int num);
 
+void omapdss_default_get_resolution(struct omap_dss_device *dssdev,
+		u16 *xres, u16 *yres);
+int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev);
+
 typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
 int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
 int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
@@ -572,4 +556,35 @@ int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
 #define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
 #define to_dss_device(x) container_of((x), struct omap_dss_device, dev)
 
+void omapdss_dsi_vc_enable_hs(int channel, bool enable);
+int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable);
+
+int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
+				    u16 *x, u16 *y, u16 *w, u16 *h);
+int omap_dsi_update(struct omap_dss_device *dssdev,
+		int channel,
+		u16 x, u16 y, u16 w, u16 h,
+		void (*callback)(int, void *), void *data);
+
+int omapdss_dsi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_dsi_display_disable(struct omap_dss_device *dssdev);
+
+int omapdss_dpi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_dpi_display_disable(struct omap_dss_device *dssdev);
+void dpi_set_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+int dpi_check_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+
+int omapdss_sdi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_sdi_display_disable(struct omap_dss_device *dssdev);
+
+int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev);
+int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
+		u16 *x, u16 *y, u16 *w, u16 *h);
+int omap_rfbi_update(struct omap_dss_device *dssdev,
+		u16 x, u16 y, u16 w, u16 h,
+		void (*callback)(void *), void *data);
+
 #endif
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index 567db6ac32c8..6978ae4ef83a 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/lcd.h>
 
 #include <plat/board-ams-delta.h>
 #include <mach/hardware.h>
@@ -32,6 +33,71 @@
 
 #define AMS_DELTA_DEFAULT_CONTRAST	112
 
+#define AMS_DELTA_MAX_CONTRAST		0x00FF
+#define AMS_DELTA_LCD_POWER		0x0100
+
+
+/* LCD class device section */
+
+static int ams_delta_lcd;
+
+static int ams_delta_lcd_set_power(struct lcd_device *dev, int power)
+{
+	if (power == FB_BLANK_UNBLANK) {
+		if (!(ams_delta_lcd & AMS_DELTA_LCD_POWER)) {
+			omap_writeb(ams_delta_lcd & AMS_DELTA_MAX_CONTRAST,
+					OMAP_PWL_ENABLE);
+			omap_writeb(1, OMAP_PWL_CLK_ENABLE);
+			ams_delta_lcd |= AMS_DELTA_LCD_POWER;
+		}
+	} else {
+		if (ams_delta_lcd & AMS_DELTA_LCD_POWER) {
+			omap_writeb(0, OMAP_PWL_ENABLE);
+			omap_writeb(0, OMAP_PWL_CLK_ENABLE);
+			ams_delta_lcd &= ~AMS_DELTA_LCD_POWER;
+		}
+	}
+	return 0;
+}
+
+static int ams_delta_lcd_set_contrast(struct lcd_device *dev, int value)
+{
+	if ((value >= 0) && (value <= AMS_DELTA_MAX_CONTRAST)) {
+		omap_writeb(value, OMAP_PWL_ENABLE);
+		ams_delta_lcd &= ~AMS_DELTA_MAX_CONTRAST;
+		ams_delta_lcd |= value;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_LCD_CLASS_DEVICE
+static int ams_delta_lcd_get_power(struct lcd_device *dev)
+{
+	if (ams_delta_lcd & AMS_DELTA_LCD_POWER)
+		return FB_BLANK_UNBLANK;
+	else
+		return FB_BLANK_POWERDOWN;
+}
+
+static int ams_delta_lcd_get_contrast(struct lcd_device *dev)
+{
+	if (!(ams_delta_lcd & AMS_DELTA_LCD_POWER))
+		return 0;
+
+	return ams_delta_lcd & AMS_DELTA_MAX_CONTRAST;
+}
+
+static struct lcd_ops ams_delta_lcd_ops = {
+	.get_power = ams_delta_lcd_get_power,
+	.set_power = ams_delta_lcd_set_power,
+	.get_contrast = ams_delta_lcd_get_contrast,
+	.set_contrast = ams_delta_lcd_set_contrast,
+};
+#endif
+
+
+/* omapfb panel section */
+
 static int ams_delta_panel_init(struct lcd_panel *panel,
 		struct omapfb_device *fbdev)
 {
@@ -48,10 +114,6 @@ static int ams_delta_panel_enable(struct lcd_panel *panel)
 			AMS_DELTA_LATCH2_LCD_NDISP);
 	ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_VBLEN,
 			AMS_DELTA_LATCH2_LCD_VBLEN);
-
-	omap_writeb(1, OMAP_PWL_CLK_ENABLE);
-	omap_writeb(AMS_DELTA_DEFAULT_CONTRAST, OMAP_PWL_ENABLE);
-
 	return 0;
 }
 
@@ -91,8 +153,31 @@ static struct lcd_panel ams_delta_panel = {
 	.get_caps	= ams_delta_panel_get_caps,
 };
 
+
+/* platform driver section */
+
 static int ams_delta_panel_probe(struct platform_device *pdev)
 {
+	struct lcd_device *lcd_device = NULL;
+#ifdef CONFIG_LCD_CLASS_DEVICE
+	int ret;
+
+	lcd_device = lcd_device_register("omapfb", &pdev->dev, NULL,
+						&ams_delta_lcd_ops);
+
+	if (IS_ERR(lcd_device)) {
+		ret = PTR_ERR(lcd_device);
+		dev_err(&pdev->dev, "failed to register device\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, lcd_device);
+	lcd_device->props.max_contrast = AMS_DELTA_MAX_CONTRAST;
+#endif
+
+	ams_delta_lcd_set_contrast(lcd_device, AMS_DELTA_DEFAULT_CONTRAST);
+	ams_delta_lcd_set_power(lcd_device, FB_BLANK_UNBLANK);
+
 	omapfb_register_panel(&ams_delta_panel);
 	return 0;
 }
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 2c4f470fa086..8ce60e1b220a 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -486,10 +486,11 @@ static int set_color_mode(struct omapfb_plane_struct *plane,
 		return 0;
 	case 12:
 		var->bits_per_pixel = 16;
-		plane->color_mode = OMAPFB_COLOR_RGB444;
-		return 0;
 	case 16:
-		plane->color_mode = OMAPFB_COLOR_RGB565;
+		if (plane->fbdev->panel->bpp == 12)
+			plane->color_mode = OMAPFB_COLOR_RGB444;
+		else
+			plane->color_mode = OMAPFB_COLOR_RGB565;
 		return 0;
 	default:
 		return -EINVAL;
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index b12a59c9c50a..dfb57ee50861 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -13,10 +13,28 @@ config PANEL_SHARP_LS037V7DW01
         help
           LCD Panel used in TI's SDP3430 and EVM boards
 
+config PANEL_SHARP_LQ043T1DG01
+        tristate "Sharp LQ043T1DG01 LCD Panel"
+        depends on OMAP2_DSS
+        help
+          LCD Panel used in TI's OMAP3517 EVM boards
+
 config PANEL_TAAL
         tristate "Taal DSI Panel"
         depends on OMAP2_DSS_DSI
         help
           Taal DSI command mode panel from TPO.
 
+config PANEL_TOPPOLY_TDO35S
+        tristate "Toppoly TDO35S LCD Panel support"
+        depends on OMAP2_DSS
+        help
+          LCD Panel used in CM-T35
+
+config PANEL_TPO_TD043MTEA1
+        tristate "TPO TD043MTEA1 LCD Panel"
+        depends on OMAP2_DSS && I2C
+        help
+          LCD Panel used in OMAP3 Pandora
+
 endmenu
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index 955646440b3a..e2bb32168dee 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -1,4 +1,7 @@
 obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
 obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
 
 obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
+obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
+obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
diff --git a/drivers/video/omap2/displays/panel-generic.c b/drivers/video/omap2/displays/panel-generic.c
index eb48d1afd800..c59e4baed8b2 100644
--- a/drivers/video/omap2/displays/panel-generic.c
+++ b/drivers/video/omap2/displays/panel-generic.c
@@ -35,6 +35,35 @@ static struct omap_video_timings generic_panel_timings = {
 	.vbp		= 7,
 };
 
+static int generic_panel_power_on(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	r = omapdss_dpi_display_enable(dssdev);
+	if (r)
+		goto err0;
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			goto err1;
+	}
+
+	return 0;
+err1:
+	omapdss_dpi_display_disable(dssdev);
+err0:
+	return r;
+}
+
+static void generic_panel_power_off(struct omap_dss_device *dssdev)
+{
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	omapdss_dpi_display_disable(dssdev);
+}
+
 static int generic_panel_probe(struct omap_dss_device *dssdev)
 {
 	dssdev->panel.config = OMAP_DSS_LCD_TFT;
@@ -51,27 +80,40 @@ static int generic_panel_enable(struct omap_dss_device *dssdev)
 {
 	int r = 0;
 
-	if (dssdev->platform_enable)
-		r = dssdev->platform_enable(dssdev);
+	r = generic_panel_power_on(dssdev);
+	if (r)
+		return r;
 
-	return r;
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
 }
 
 static void generic_panel_disable(struct omap_dss_device *dssdev)
 {
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
+	generic_panel_power_off(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 }
 
 static int generic_panel_suspend(struct omap_dss_device *dssdev)
 {
-	generic_panel_disable(dssdev);
+	generic_panel_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
 	return 0;
 }
 
 static int generic_panel_resume(struct omap_dss_device *dssdev)
 {
-	return generic_panel_enable(dssdev);
+	int r = 0;
+
+	r = generic_panel_power_on(dssdev);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
 }
 
 static struct omap_dss_driver generic_driver = {
diff --git a/drivers/video/omap2/displays/panel-sharp-lq043t1dg01.c b/drivers/video/omap2/displays/panel-sharp-lq043t1dg01.c
new file mode 100644
index 000000000000..10267461991c
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-sharp-lq043t1dg01.c
@@ -0,0 +1,159 @@
+/*
+ * LCD panel driver for Sharp LQ043T1DG01
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+
+#include <plat/display.h>
+
+static struct omap_video_timings sharp_lq_timings = {
+	.x_res = 480,
+	.y_res = 272,
+
+	.pixel_clock	= 9000,
+
+	.hsw		= 42,
+	.hfp		= 3,
+	.hbp		= 2,
+
+	.vsw		= 11,
+	.vfp		= 3,
+	.vbp		= 2,
+};
+
+static int sharp_lq_panel_power_on(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	r = omapdss_dpi_display_enable(dssdev);
+	if (r)
+		goto err0;
+
+	/* wait couple of vsyncs until enabling the LCD */
+	msleep(50);
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			goto err1;
+	}
+
+	return 0;
+err1:
+	omapdss_dpi_display_disable(dssdev);
+err0:
+	return r;
+}
+
+static void sharp_lq_panel_power_off(struct omap_dss_device *dssdev)
+{
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	/* wait at least 5 vsyncs after disabling the LCD */
+	msleep(100);
+
+	omapdss_dpi_display_disable(dssdev);
+}
+
+static int sharp_lq_panel_probe(struct omap_dss_device *dssdev)
+{
+
+	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+		OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IEO;
+	dssdev->panel.acb = 0x0;
+	dssdev->panel.timings = sharp_lq_timings;
+
+	return 0;
+}
+
+static void sharp_lq_panel_remove(struct omap_dss_device *dssdev)
+{
+}
+
+static int sharp_lq_panel_enable(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	r = sharp_lq_panel_power_on(dssdev);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void sharp_lq_panel_disable(struct omap_dss_device *dssdev)
+{
+	sharp_lq_panel_power_off(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static int sharp_lq_panel_suspend(struct omap_dss_device *dssdev)
+{
+	sharp_lq_panel_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+	return 0;
+}
+
+static int sharp_lq_panel_resume(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	r = sharp_lq_panel_power_on(dssdev);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static struct omap_dss_driver sharp_lq_driver = {
+	.probe		= sharp_lq_panel_probe,
+	.remove		= sharp_lq_panel_remove,
+
+	.enable		= sharp_lq_panel_enable,
+	.disable	= sharp_lq_panel_disable,
+	.suspend	= sharp_lq_panel_suspend,
+	.resume		= sharp_lq_panel_resume,
+
+	.driver         = {
+		.name   = "sharp_lq_panel",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init sharp_lq_panel_drv_init(void)
+{
+	return omap_dss_register_driver(&sharp_lq_driver);
+}
+
+static void __exit sharp_lq_panel_drv_exit(void)
+{
+	omap_dss_unregister_driver(&sharp_lq_driver);
+}
+
+module_init(sharp_lq_panel_drv_init);
+module_exit(sharp_lq_panel_drv_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
index bbe880bbe795..8d51a5e6341c 100644
--- a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
@@ -20,19 +20,10 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/device.h>
-#include <linux/regulator/consumer.h>
 #include <linux/err.h>
 
 #include <plat/display.h>
 
-struct sharp_data {
-	/* XXX This regulator should actually be in SDP board file, not here,
-	 * as it doesn't actually power the LCD, but something else that
-	 * affects the output to LCD (I think. Somebody clarify). It doesn't do
-	 * harm here, as SDP is the only board using this currently */
-	struct regulator *vdvi_reg;
-};
-
 static struct omap_video_timings sharp_ls_timings = {
 	.x_res = 480,
 	.y_res = 640,
@@ -50,77 +41,81 @@ static struct omap_video_timings sharp_ls_timings = {
 
 static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
 {
-	struct sharp_data *sd;
-
 	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
 		OMAP_DSS_LCD_IHS;
 	dssdev->panel.acb = 0x28;
 	dssdev->panel.timings = sharp_ls_timings;
 
-	sd = kzalloc(sizeof(*sd), GFP_KERNEL);
-	if (!sd)
-		return -ENOMEM;
-
-	dev_set_drvdata(&dssdev->dev, sd);
-
-	sd->vdvi_reg = regulator_get(&dssdev->dev, "vdvi");
-	if (IS_ERR(sd->vdvi_reg)) {
-		kfree(sd);
-		pr_err("failed to get VDVI regulator\n");
-		return PTR_ERR(sd->vdvi_reg);
-	}
-
 	return 0;
 }
 
 static void sharp_ls_panel_remove(struct omap_dss_device *dssdev)
 {
-	struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
-
-	regulator_put(sd->vdvi_reg);
-
-	kfree(sd);
 }
 
-static int sharp_ls_panel_enable(struct omap_dss_device *dssdev)
+static int sharp_ls_power_on(struct omap_dss_device *dssdev)
 {
-	struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
 	int r = 0;
 
+	r = omapdss_dpi_display_enable(dssdev);
+	if (r)
+		goto err0;
+
 	/* wait couple of vsyncs until enabling the LCD */
 	msleep(50);
 
-	regulator_enable(sd->vdvi_reg);
-
-	if (dssdev->platform_enable)
+	if (dssdev->platform_enable) {
 		r = dssdev->platform_enable(dssdev);
+		if (r)
+			goto err1;
+	}
 
+	return 0;
+err1:
+	omapdss_dpi_display_disable(dssdev);
+err0:
 	return r;
 }
 
-static void sharp_ls_panel_disable(struct omap_dss_device *dssdev)
+static void sharp_ls_power_off(struct omap_dss_device *dssdev)
 {
-	struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
-
 	if (dssdev->platform_disable)
 		dssdev->platform_disable(dssdev);
 
-	regulator_disable(sd->vdvi_reg);
-
 	/* wait at least 5 vsyncs after disabling the LCD */
 
 	msleep(100);
+
+	omapdss_dpi_display_disable(dssdev);
+}
+
+static int sharp_ls_panel_enable(struct omap_dss_device *dssdev)
+{
+	int r;
+	r = sharp_ls_power_on(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+	return r;
+}
+
+static void sharp_ls_panel_disable(struct omap_dss_device *dssdev)
+{
+	sharp_ls_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 }
 
 static int sharp_ls_panel_suspend(struct omap_dss_device *dssdev)
 {
-	sharp_ls_panel_disable(dssdev);
+	sharp_ls_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
 	return 0;
 }
 
 static int sharp_ls_panel_resume(struct omap_dss_device *dssdev)
 {
-	return sharp_ls_panel_enable(dssdev);
+	int r;
+	r = sharp_ls_power_on(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+	return r;
 }
 
 static struct omap_dss_driver sharp_ls_driver = {
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 1f01dfc5e52e..fcd6a61a91eb 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -63,6 +63,8 @@
 /* #define TAAL_USE_ESD_CHECK */
 #define TAAL_ESD_CHECK_PERIOD	msecs_to_jiffies(5000)
 
+static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable);
+
 struct taal_data {
 	struct backlight_device *bldev;
 
@@ -510,15 +512,12 @@ static int taal_probe(struct omap_dss_device *dssdev)
 	if (td->esd_wq == NULL) {
 		dev_err(&dssdev->dev, "can't create ESD workqueue\n");
 		r = -ENOMEM;
-		goto err2;
+		goto err1;
 	}
 	INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
 
 	dev_set_drvdata(&dssdev->dev, td);
 
-	dssdev->get_timings = taal_get_timings;
-	dssdev->get_resolution = taal_get_resolution;
-
 	/* if no platform set_backlight() defined, presume DSI backlight
 	 * control */
 	if (!dssdev->set_backlight)
@@ -528,7 +527,7 @@ static int taal_probe(struct omap_dss_device *dssdev)
 			&taal_bl_ops);
 	if (IS_ERR(bldev)) {
 		r = PTR_ERR(bldev);
-		goto err1;
+		goto err2;
 	}
 
 	td->bldev = bldev;
@@ -621,14 +620,12 @@ static void taal_remove(struct omap_dss_device *dssdev)
 	kfree(td);
 }
 
-static int taal_enable(struct omap_dss_device *dssdev)
+static int taal_power_on(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
 	u8 id1, id2, id3;
 	int r;
 
-	dev_dbg(&dssdev->dev, "enable\n");
-
 	if (dssdev->platform_enable) {
 		r = dssdev->platform_enable(dssdev);
 		if (r)
@@ -638,6 +635,16 @@ static int taal_enable(struct omap_dss_device *dssdev)
 	/* it seems we have to wait a bit until taal is ready */
 	msleep(5);
 
+	dsi_bus_lock();
+
+	r = omapdss_dsi_display_enable(dssdev);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to enable DSI\n");
+		goto err0;
+	}
+
+	omapdss_dsi_vc_enable_hs(TCH, false);
+
 	r = taal_sleep_out(td);
 	if (r)
 		goto err;
@@ -661,6 +668,10 @@ static int taal_enable(struct omap_dss_device *dssdev)
 
 	taal_dcs_write_0(DCS_DISPLAY_ON);
 
+	r = _taal_enable_te(dssdev, td->te_enabled);
+	if (r)
+		goto err;
+
 #ifdef TAAL_USE_ESD_CHECK
 	queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD);
 #endif
@@ -676,19 +687,27 @@ static int taal_enable(struct omap_dss_device *dssdev)
 		td->intro_printed = true;
 	}
 
+	omapdss_dsi_vc_enable_hs(TCH, true);
+
+	dsi_bus_unlock();
+
 	return 0;
 err:
+	dsi_bus_unlock();
+
+	omapdss_dsi_display_disable(dssdev);
+err0:
 	if (dssdev->platform_disable)
 		dssdev->platform_disable(dssdev);
 
 	return r;
 }
 
-static void taal_disable(struct omap_dss_device *dssdev)
+static void taal_power_off(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
 
-	dev_dbg(&dssdev->dev, "disable\n");
+	dsi_bus_lock();
 
 	cancel_delayed_work(&td->esd_work);
 
@@ -698,41 +717,124 @@ static void taal_disable(struct omap_dss_device *dssdev)
 	/* wait a bit so that the message goes through */
 	msleep(10);
 
+	omapdss_dsi_display_disable(dssdev);
+
 	if (dssdev->platform_disable)
 		dssdev->platform_disable(dssdev);
 
 	td->enabled = 0;
+
+	dsi_bus_unlock();
+}
+
+static int taal_enable(struct omap_dss_device *dssdev)
+{
+	int r;
+	dev_dbg(&dssdev->dev, "enable\n");
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)
+		return -EINVAL;
+
+	r = taal_power_on(dssdev);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return r;
+}
+
+static void taal_disable(struct omap_dss_device *dssdev)
+{
+	dev_dbg(&dssdev->dev, "disable\n");
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+		taal_power_off(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 }
 
 static int taal_suspend(struct omap_dss_device *dssdev)
 {
-	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	struct backlight_device *bldev = td->bldev;
+	dev_dbg(&dssdev->dev, "suspend\n");
 
-	bldev->props.power = FB_BLANK_POWERDOWN;
-	taal_bl_update_status(bldev);
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return -EINVAL;
+
+	taal_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
 
 	return 0;
 }
 
 static int taal_resume(struct omap_dss_device *dssdev)
 {
+	int r;
+	dev_dbg(&dssdev->dev, "resume\n");
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED)
+		return -EINVAL;
+
+	r = taal_power_on(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+	return r;
+}
+
+static void taal_framedone_cb(int err, void *data)
+{
+	struct omap_dss_device *dssdev = data;
+	dev_dbg(&dssdev->dev, "framedone, err %d\n", err);
+	dsi_bus_unlock();
+}
+
+static int taal_update(struct omap_dss_device *dssdev,
+				    u16 x, u16 y, u16 w, u16 h)
+{
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	struct backlight_device *bldev = td->bldev;
+	int r;
 
-	bldev->props.power = FB_BLANK_UNBLANK;
-	taal_bl_update_status(bldev);
+	dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
+
+	dsi_bus_lock();
+
+	if (!td->enabled) {
+		r = 0;
+		goto err;
+	}
+
+	r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h);
+	if (r)
+		goto err;
+
+	r = taal_set_update_window(x, y, w, h);
+	if (r)
+		goto err;
+
+	r = omap_dsi_update(dssdev, TCH, x, y, w, h,
+			taal_framedone_cb, dssdev);
+	if (r)
+		goto err;
 
+	/* note: no bus_unlock here. unlock is in framedone_cb */
 	return 0;
+err:
+	dsi_bus_unlock();
+	return r;
 }
 
-static void taal_setup_update(struct omap_dss_device *dssdev,
-				    u16 x, u16 y, u16 w, u16 h)
+static int taal_sync(struct omap_dss_device *dssdev)
 {
-	taal_set_update_window(x, y, w, h);
+	dev_dbg(&dssdev->dev, "sync\n");
+
+	dsi_bus_lock();
+	dsi_bus_unlock();
+
+	dev_dbg(&dssdev->dev, "sync done\n");
+
+	return 0;
 }
 
-static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
+static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
 	int r;
@@ -744,25 +846,32 @@ static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
 	else
 		r = taal_dcs_write_0(DCS_TEAR_OFF);
 
+	omapdss_dsi_enable_te(dssdev, enable);
+
+	/* XXX for some reason, DSI TE breaks if we don't wait here.
+	 * Panel bug? Needs more studying */
+	msleep(100);
+
 	return r;
 }
 
-static int taal_wait_te(struct omap_dss_device *dssdev)
+static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
 {
-	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	long wait = msecs_to_jiffies(500);
+	int r;
 
-	if (!td->use_ext_te || !td->te_enabled)
-		return 0;
+	dsi_bus_lock();
 
-	INIT_COMPLETION(td->te_completion);
-	wait = wait_for_completion_timeout(&td->te_completion, wait);
-	if (wait == 0) {
-		dev_err(&dssdev->dev, "timeout waiting TE\n");
-		return -ETIME;
-	}
+	r = _taal_enable_te(dssdev, enable);
 
-	return 0;
+	dsi_bus_unlock();
+
+	return r;
+}
+
+static int taal_get_te(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	return td->te_enabled;
 }
 
 static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
@@ -772,16 +881,21 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
 
 	dev_dbg(&dssdev->dev, "rotate %d\n", rotate);
 
+	dsi_bus_lock();
+
 	if (td->enabled) {
 		r = taal_set_addr_mode(rotate, td->mirror);
-
 		if (r)
-			return r;
+			goto err;
 	}
 
 	td->rotate = rotate;
 
+	dsi_bus_unlock();
 	return 0;
+err:
+	dsi_bus_unlock();
+	return r;
 }
 
 static u8 taal_get_rotate(struct omap_dss_device *dssdev)
@@ -797,16 +911,20 @@ static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
 
 	dev_dbg(&dssdev->dev, "mirror %d\n", enable);
 
+	dsi_bus_lock();
 	if (td->enabled) {
 		r = taal_set_addr_mode(td->rotate, enable);
-
 		if (r)
-			return r;
+			goto err;
 	}
 
 	td->mirror = enable;
 
+	dsi_bus_unlock();
 	return 0;
+err:
+	dsi_bus_unlock();
+	return r;
 }
 
 static bool taal_get_mirror(struct omap_dss_device *dssdev)
@@ -820,17 +938,23 @@ static int taal_run_test(struct omap_dss_device *dssdev, int test_num)
 	u8 id1, id2, id3;
 	int r;
 
+	dsi_bus_lock();
+
 	r = taal_dcs_read_1(DCS_GET_ID1, &id1);
 	if (r)
-		return r;
+		goto err;
 	r = taal_dcs_read_1(DCS_GET_ID2, &id2);
 	if (r)
-		return r;
+		goto err;
 	r = taal_dcs_read_1(DCS_GET_ID3, &id3);
 	if (r)
-		return r;
+		goto err;
 
+	dsi_bus_unlock();
 	return 0;
+err:
+	dsi_bus_unlock();
+	return r;
 }
 
 static int taal_memory_read(struct omap_dss_device *dssdev,
@@ -841,6 +965,10 @@ static int taal_memory_read(struct omap_dss_device *dssdev,
 	int first = 1;
 	int plen;
 	unsigned buf_used = 0;
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	if (!td->enabled)
+		return -ENODEV;
 
 	if (size < w * h * 3)
 		return -ENOMEM;
@@ -849,6 +977,8 @@ static int taal_memory_read(struct omap_dss_device *dssdev,
 			dssdev->panel.timings.x_res *
 			dssdev->panel.timings.y_res * 3);
 
+	dsi_bus_lock();
+
 	/* plen 1 or 2 goes into short packet. until checksum error is fixed,
 	 * use short packets. plen 32 works, but bigger packets seem to cause
 	 * an error. */
@@ -857,11 +987,11 @@ static int taal_memory_read(struct omap_dss_device *dssdev,
 	else
 		plen = 2;
 
-	taal_setup_update(dssdev, x, y, w, h);
+	taal_set_update_window(x, y, w, h);
 
 	r = dsi_vc_set_max_rx_packet_size(TCH, plen);
 	if (r)
-		return r;
+		goto err0;
 
 	while (buf_used < size) {
 		u8 dcs_cmd = first ? 0x2e : 0x3e;
@@ -894,7 +1024,8 @@ static int taal_memory_read(struct omap_dss_device *dssdev,
 
 err:
 	dsi_vc_set_max_rx_packet_size(TCH, 1);
-
+err0:
+	dsi_bus_unlock();
 	return r;
 }
 
@@ -939,8 +1070,11 @@ static void taal_esd_work(struct work_struct *work)
 	}
 	/* Self-diagnostics result is also shown on TE GPIO line. We need
 	 * to re-enable TE after self diagnostics */
-	if (td->use_ext_te && td->te_enabled)
-		taal_enable_te(dssdev, true);
+	if (td->use_ext_te && td->te_enabled) {
+		r = taal_dcs_write_1(DCS_TEAR_ON, 0);
+		if (r)
+			goto err;
+	}
 
 	dsi_bus_unlock();
 
@@ -958,6 +1092,20 @@ err:
 	queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD);
 }
 
+static int taal_set_update_mode(struct omap_dss_device *dssdev,
+		enum omap_dss_update_mode mode)
+{
+	if (mode != OMAP_DSS_UPDATE_MANUAL)
+		return -EINVAL;
+	return 0;
+}
+
+static enum omap_dss_update_mode taal_get_update_mode(
+		struct omap_dss_device *dssdev)
+{
+	return OMAP_DSS_UPDATE_MANUAL;
+}
+
 static struct omap_dss_driver taal_driver = {
 	.probe		= taal_probe,
 	.remove		= taal_remove,
@@ -967,9 +1115,18 @@ static struct omap_dss_driver taal_driver = {
 	.suspend	= taal_suspend,
 	.resume		= taal_resume,
 
-	.setup_update	= taal_setup_update,
+	.set_update_mode = taal_set_update_mode,
+	.get_update_mode = taal_get_update_mode,
+
+	.update		= taal_update,
+	.sync		= taal_sync,
+
+	.get_resolution	= taal_get_resolution,
+	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
+
 	.enable_te	= taal_enable_te,
-	.wait_for_te	= taal_wait_te,
+	.get_te		= taal_get_te,
+
 	.set_rotate	= taal_rotate,
 	.get_rotate	= taal_get_rotate,
 	.set_mirror	= taal_mirror,
@@ -977,6 +1134,8 @@ static struct omap_dss_driver taal_driver = {
 	.run_test	= taal_run_test,
 	.memory_read	= taal_memory_read,
 
+	.get_timings	= taal_get_timings,
+
 	.driver         = {
 		.name   = "taal",
 		.owner  = THIS_MODULE,
diff --git a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
new file mode 100644
index 000000000000..fa434ca6e4b7
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
@@ -0,0 +1,154 @@
+/*
+ * LCD panel driver for Toppoly TDO35S
+ *
+ * Copyright (C) 2009 CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on generic panel support
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <plat/display.h>
+
+static struct omap_video_timings toppoly_tdo_panel_timings = {
+	/* 640 x 480 @ 60 Hz  Reduced blanking VESA CVT 0.31M3-R */
+	.x_res		= 480,
+	.y_res		= 640,
+
+	.pixel_clock	= 26000,
+
+	.hfp		= 104,
+	.hsw		= 8,
+	.hbp		= 8,
+
+	.vfp		= 4,
+	.vsw		= 2,
+	.vbp		= 2,
+};
+
+static int toppoly_tdo_panel_power_on(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	r = omapdss_dpi_display_enable(dssdev);
+	if (r)
+		goto err0;
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			goto err1;
+	}
+
+	return 0;
+err1:
+	omapdss_dpi_display_disable(dssdev);
+err0:
+	return r;
+}
+
+static void toppoly_tdo_panel_power_off(struct omap_dss_device *dssdev)
+{
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	omapdss_dpi_display_disable(dssdev);
+}
+
+static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev)
+{
+	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+		OMAP_DSS_LCD_IHS;
+	dssdev->panel.timings = toppoly_tdo_panel_timings;
+
+	return 0;
+}
+
+static void toppoly_tdo_panel_remove(struct omap_dss_device *dssdev)
+{
+}
+
+static int toppoly_tdo_panel_enable(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	r = toppoly_tdo_panel_power_on(dssdev);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void toppoly_tdo_panel_disable(struct omap_dss_device *dssdev)
+{
+	toppoly_tdo_panel_power_off(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static int toppoly_tdo_panel_suspend(struct omap_dss_device *dssdev)
+{
+	toppoly_tdo_panel_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+	return 0;
+}
+
+static int toppoly_tdo_panel_resume(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	r = toppoly_tdo_panel_power_on(dssdev);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static struct omap_dss_driver generic_driver = {
+	.probe		= toppoly_tdo_panel_probe,
+	.remove		= toppoly_tdo_panel_remove,
+
+	.enable		= toppoly_tdo_panel_enable,
+	.disable	= toppoly_tdo_panel_disable,
+	.suspend	= toppoly_tdo_panel_suspend,
+	.resume		= toppoly_tdo_panel_resume,
+
+	.driver         = {
+		.name   = "toppoly_tdo35s_panel",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init toppoly_tdo_panel_drv_init(void)
+{
+	return omap_dss_register_driver(&generic_driver);
+}
+
+static void __exit toppoly_tdo_panel_drv_exit(void)
+{
+	omap_dss_unregister_driver(&generic_driver);
+}
+
+module_init(toppoly_tdo_panel_drv_init);
+module_exit(toppoly_tdo_panel_drv_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
new file mode 100644
index 000000000000..d578feee3550
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -0,0 +1,528 @@
+/*
+ * LCD panel driver for TPO TD043MTEA1
+ *
+ * Author: Gražvydas Ignotas <notasas@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+
+#include <plat/display.h>
+
+#define TPO_R02_MODE(x)		((x) & 7)
+#define TPO_R02_MODE_800x480	7
+#define TPO_R02_NCLK_RISING	BIT(3)
+#define TPO_R02_HSYNC_HIGH	BIT(4)
+#define TPO_R02_VSYNC_HIGH	BIT(5)
+
+#define TPO_R03_NSTANDBY	BIT(0)
+#define TPO_R03_EN_CP_CLK	BIT(1)
+#define TPO_R03_EN_VGL_PUMP	BIT(2)
+#define TPO_R03_EN_PWM		BIT(3)
+#define TPO_R03_DRIVING_CAP_100	BIT(4)
+#define TPO_R03_EN_PRE_CHARGE	BIT(6)
+#define TPO_R03_SOFTWARE_CTL	BIT(7)
+
+#define TPO_R04_NFLIP_H		BIT(0)
+#define TPO_R04_NFLIP_V		BIT(1)
+#define TPO_R04_CP_CLK_FREQ_1H	BIT(2)
+#define TPO_R04_VGL_FREQ_1H	BIT(4)
+
+#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
+			TPO_R03_EN_VGL_PUMP |  TPO_R03_EN_PWM | \
+			TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
+			TPO_R03_SOFTWARE_CTL)
+
+#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
+			TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
+
+static const u16 tpo_td043_def_gamma[12] = {
+	106, 200, 289, 375, 460, 543, 625, 705, 785, 864, 942, 1020
+};
+
+struct tpo_td043_device {
+	struct spi_device *spi;
+	struct regulator *vcc_reg;
+	u16 gamma[12];
+	u32 mode;
+	u32 hmirror:1;
+	u32 vmirror:1;
+};
+
+static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
+{
+	struct spi_message	m;
+	struct spi_transfer	xfer;
+	u16			w;
+	int			r;
+
+	spi_message_init(&m);
+
+	memset(&xfer, 0, sizeof(xfer));
+
+	w = ((u16)addr << 10) | (1 << 8) | data;
+	xfer.tx_buf = &w;
+	xfer.bits_per_word = 16;
+	xfer.len = 2;
+	spi_message_add_tail(&xfer, &m);
+
+	r = spi_sync(spi, &m);
+	if (r < 0)
+		dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
+	return r;
+}
+
+static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
+{
+	u8 i, val;
+
+	/* gamma bits [9:8] */
+	for (val = i = 0; i < 4; i++)
+		val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
+	tpo_td043_write(spi, 0x11, val);
+
+	for (val = i = 0; i < 4; i++)
+		val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
+	tpo_td043_write(spi, 0x12, val);
+
+	for (val = i = 0; i < 4; i++)
+		val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
+	tpo_td043_write(spi, 0x13, val);
+
+	/* gamma bits [7:0] */
+	for (val = i = 0; i < 12; i++)
+		tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
+}
+
+static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
+{
+	u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V | \
+		TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
+	if (h)
+		reg4 &= ~TPO_R04_NFLIP_H;
+	if (v)
+		reg4 &= ~TPO_R04_NFLIP_V;
+
+	return tpo_td043_write(spi, 4, reg4);
+}
+
+static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+
+	tpo_td043->hmirror = enable;
+	return tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror,
+			tpo_td043->vmirror);
+}
+
+static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+
+	return tpo_td043->hmirror;
+}
+
+static ssize_t tpo_td043_vmirror_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->vmirror);
+}
+
+static ssize_t tpo_td043_vmirror_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+	long val;
+	int ret;
+
+	ret = strict_strtol(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	ret = tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, val);
+	if (ret < 0)
+		return ret;
+
+	tpo_td043->vmirror = val;
+
+	return count;
+}
+
+static ssize_t tpo_td043_mode_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->mode);
+}
+
+static ssize_t tpo_td043_mode_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+	long val;
+	int ret;
+
+	ret = strict_strtol(buf, 0, &val);
+	if (ret != 0 || val & ~7)
+		return -EINVAL;
+
+	tpo_td043->mode = val;
+
+	val |= TPO_R02_NCLK_RISING;
+	tpo_td043_write(tpo_td043->spi, 2, val);
+
+	return count;
+}
+
+static ssize_t tpo_td043_gamma_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+	ssize_t len = 0;
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(tpo_td043->gamma); i++) {
+		ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
+				tpo_td043->gamma[i]);
+		if (ret < 0)
+			return ret;
+		len += ret;
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t tpo_td043_gamma_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+	unsigned int g[12];
+	int ret;
+	int i;
+
+	ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
+			&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
+			&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
+
+	if (ret != 12)
+		return -EINVAL;
+
+	for (i = 0; i < 12; i++)
+		tpo_td043->gamma[i] = g[i];
+
+	tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma);
+
+	return count;
+}
+
+static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
+		tpo_td043_vmirror_show, tpo_td043_vmirror_store);
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
+		tpo_td043_mode_show, tpo_td043_mode_store);
+static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
+		tpo_td043_gamma_show, tpo_td043_gamma_store);
+
+static struct attribute *tpo_td043_attrs[] = {
+	&dev_attr_vmirror.attr,
+	&dev_attr_mode.attr,
+	&dev_attr_gamma.attr,
+	NULL,
+};
+
+static struct attribute_group tpo_td043_attr_group = {
+	.attrs = tpo_td043_attrs,
+};
+
+static const struct omap_video_timings tpo_td043_timings = {
+	.x_res		= 800,
+	.y_res		= 480,
+
+	.pixel_clock	= 36000,
+
+	.hsw		= 1,
+	.hfp		= 68,
+	.hbp		= 214,
+
+	.vsw		= 1,
+	.vfp		= 39,
+	.vbp		= 34,
+};
+
+static int tpo_td043_power_on(struct omap_dss_device *dssdev)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+	int nreset_gpio = dssdev->reset_gpio;
+	int r;
+
+	r = omapdss_dpi_display_enable(dssdev);
+	if (r)
+		goto err0;
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			goto err1;
+	}
+
+	regulator_enable(tpo_td043->vcc_reg);
+
+	/* wait for power up */
+	msleep(160);
+
+	if (gpio_is_valid(nreset_gpio))
+		gpio_set_value(nreset_gpio, 1);
+
+	tpo_td043_write(tpo_td043->spi, 2,
+			TPO_R02_MODE(tpo_td043->mode) | TPO_R02_NCLK_RISING);
+	tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_NORMAL);
+	tpo_td043_write(tpo_td043->spi, 0x20, 0xf0);
+	tpo_td043_write(tpo_td043->spi, 0x21, 0xf0);
+	tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror,
+			tpo_td043->vmirror);
+	tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma);
+
+	return 0;
+err1:
+	omapdss_dpi_display_disable(dssdev);
+err0:
+	return r;
+}
+
+static void tpo_td043_power_off(struct omap_dss_device *dssdev)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+	int nreset_gpio = dssdev->reset_gpio;
+
+	tpo_td043_write(tpo_td043->spi, 3,
+			TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
+
+	if (gpio_is_valid(nreset_gpio))
+		gpio_set_value(nreset_gpio, 0);
+
+	/* wait for at least 2 vsyncs before cutting off power */
+	msleep(50);
+
+	tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_STANDBY);
+
+	regulator_disable(tpo_td043->vcc_reg);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	omapdss_dpi_display_disable(dssdev);
+}
+
+static int tpo_td043_enable(struct omap_dss_device *dssdev)
+{
+	int ret;
+
+	dev_dbg(&dssdev->dev, "enable\n");
+
+	ret = tpo_td043_power_on(dssdev);
+	if (ret)
+		return ret;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void tpo_td043_disable(struct omap_dss_device *dssdev)
+{
+	dev_dbg(&dssdev->dev, "disable\n");
+
+	tpo_td043_power_off(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static int tpo_td043_suspend(struct omap_dss_device *dssdev)
+{
+	tpo_td043_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+	return 0;
+}
+
+static int tpo_td043_resume(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	r = tpo_td043_power_on(dssdev);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static int tpo_td043_probe(struct omap_dss_device *dssdev)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+	int nreset_gpio = dssdev->reset_gpio;
+	int ret = 0;
+
+	dev_dbg(&dssdev->dev, "probe\n");
+
+	if (tpo_td043 == NULL) {
+		dev_err(&dssdev->dev, "missing tpo_td043_device\n");
+		return -ENODEV;
+	}
+
+	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IHS |
+				OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IPC;
+	dssdev->panel.timings = tpo_td043_timings;
+	dssdev->ctrl.pixel_size = 24;
+
+	tpo_td043->mode = TPO_R02_MODE_800x480;
+	memcpy(tpo_td043->gamma, tpo_td043_def_gamma, sizeof(tpo_td043->gamma));
+
+	tpo_td043->vcc_reg = regulator_get(&dssdev->dev, "vcc");
+	if (IS_ERR(tpo_td043->vcc_reg)) {
+		dev_err(&dssdev->dev, "failed to get LCD VCC regulator\n");
+		ret = PTR_ERR(tpo_td043->vcc_reg);
+		goto fail_regulator;
+	}
+
+	if (gpio_is_valid(nreset_gpio)) {
+		ret = gpio_request(nreset_gpio, "lcd reset");
+		if (ret < 0) {
+			dev_err(&dssdev->dev, "couldn't request reset GPIO\n");
+			goto fail_gpio_req;
+		}
+
+		ret = gpio_direction_output(nreset_gpio, 0);
+		if (ret < 0) {
+			dev_err(&dssdev->dev, "couldn't set GPIO direction\n");
+			goto fail_gpio_direction;
+		}
+	}
+
+	ret = sysfs_create_group(&dssdev->dev.kobj, &tpo_td043_attr_group);
+	if (ret)
+		dev_warn(&dssdev->dev, "failed to create sysfs files\n");
+
+	return 0;
+
+fail_gpio_direction:
+	gpio_free(nreset_gpio);
+fail_gpio_req:
+	regulator_put(tpo_td043->vcc_reg);
+fail_regulator:
+	kfree(tpo_td043);
+	return ret;
+}
+
+static void tpo_td043_remove(struct omap_dss_device *dssdev)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+	int nreset_gpio = dssdev->reset_gpio;
+
+	dev_dbg(&dssdev->dev, "remove\n");
+
+	sysfs_remove_group(&dssdev->dev.kobj, &tpo_td043_attr_group);
+	regulator_put(tpo_td043->vcc_reg);
+	if (gpio_is_valid(nreset_gpio))
+		gpio_free(nreset_gpio);
+}
+
+static struct omap_dss_driver tpo_td043_driver = {
+	.probe		= tpo_td043_probe,
+	.remove		= tpo_td043_remove,
+
+	.enable		= tpo_td043_enable,
+	.disable	= tpo_td043_disable,
+	.suspend	= tpo_td043_suspend,
+	.resume		= tpo_td043_resume,
+	.set_mirror	= tpo_td043_set_hmirror,
+	.get_mirror	= tpo_td043_get_hmirror,
+
+	.driver         = {
+		.name	= "tpo_td043mtea1_panel",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int tpo_td043_spi_probe(struct spi_device *spi)
+{
+	struct omap_dss_device *dssdev = spi->dev.platform_data;
+	struct tpo_td043_device *tpo_td043;
+	int ret;
+
+	if (dssdev == NULL) {
+		dev_err(&spi->dev, "missing dssdev\n");
+		return -ENODEV;
+	}
+
+	spi->bits_per_word = 16;
+	spi->mode = SPI_MODE_0;
+
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(&spi->dev, "spi_setup failed: %d\n", ret);
+		return ret;
+	}
+
+	tpo_td043 = kzalloc(sizeof(*tpo_td043), GFP_KERNEL);
+	if (tpo_td043 == NULL)
+		return -ENOMEM;
+
+	tpo_td043->spi = spi;
+	dev_set_drvdata(&spi->dev, tpo_td043);
+	dev_set_drvdata(&dssdev->dev, tpo_td043);
+
+	omap_dss_register_driver(&tpo_td043_driver);
+
+	return 0;
+}
+
+static int __devexit tpo_td043_spi_remove(struct spi_device *spi)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&spi->dev);
+
+	omap_dss_unregister_driver(&tpo_td043_driver);
+	kfree(tpo_td043);
+
+	return 0;
+}
+
+static struct spi_driver tpo_td043_spi_driver = {
+	.driver = {
+		.name	= "tpo_td043mtea1_panel_spi",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe	= tpo_td043_spi_probe,
+	.remove	= __devexit_p(tpo_td043_spi_remove),
+};
+
+static int __init tpo_td043_init(void)
+{
+	return spi_register_driver(&tpo_td043_spi_driver);
+}
+
+static void __exit tpo_td043_exit(void)
+{
+	spi_unregister_driver(&tpo_td043_spi_driver);
+}
+
+module_init(tpo_td043_init);
+module_exit(tpo_td043_exit);
+
+MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
+MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
index c63ce767b277..87afb81b2c44 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/omap2/dss/Kconfig
@@ -30,19 +30,29 @@ config OMAP2_DSS_COLLECT_IRQ_STATS
 	depends on OMAP2_DSS_DEBUG_SUPPORT
 	default n
 	help
-	  Collect DSS IRQ statistics, printable via debugfs
+	  Collect DSS IRQ statistics, printable via debugfs.
+
+	  The statistics can be found from
+	  <debugfs>/omapdss/dispc_irq for DISPC interrupts, and
+	  <debugfs>/omapdss/dsi_irq for DSI interrupts.
 
 config OMAP2_DSS_RFBI
 	bool "RFBI support"
         default n
 	help
-	  MIPI DBI, or RFBI (Remote Framebuffer Interface), support.
+	  MIPI DBI support (RFBI, Remote Framebuffer Interface, in Texas
+	  Instrument's terminology).
+
+	  DBI is a bus between the host processor and a peripheral,
+	  such as a display or a framebuffer chip.
+
+	  See http://www.mipi.org/ for DBI spesifications.
 
 config OMAP2_DSS_VENC
 	bool "VENC support"
         default y
 	help
-	  OMAP Video Encoder support.
+	  OMAP Video Encoder support for S-Video and composite TV-out.
 
 config OMAP2_DSS_SDI
 	bool "SDI support"
@@ -51,12 +61,20 @@ config OMAP2_DSS_SDI
 	help
 	  SDI (Serial Display Interface) support.
 
+	  SDI is a high speed one-way display serial bus between the host
+	  processor and a display.
+
 config OMAP2_DSS_DSI
 	bool "DSI support"
 	depends on ARCH_OMAP3
         default n
 	help
-	  MIPI DSI support.
+	  MIPI DSI (Display Serial Interface) support.
+
+	  DSI is a high speed half-duplex serial interface between the host
+	  processor and a peripheral, such as a display or a framebuffer chip.
+
+	  See http://www.mipi.org/ for DSI spesifications.
 
 config OMAP2_DSS_USE_DSI_PLL
 	bool "Use DSI PLL for PCLK (EXPERIMENTAL)"
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 82918eec6d2e..7ebe50b335ed 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -31,6 +31,7 @@
 #include <linux/debugfs.h>
 #include <linux/io.h>
 #include <linux/device.h>
+#include <linux/regulator/consumer.h>
 
 #include <plat/display.h>
 #include <plat/clock.h>
@@ -47,6 +48,10 @@ static struct {
 	struct clk      *dss_54m_fck;
 	struct clk	*dss_96m_fck;
 	unsigned	num_clks_enabled;
+
+	struct regulator *vdds_dsi_reg;
+	struct regulator *vdds_sdi_reg;
+	struct regulator *vdda_dac_reg;
 } core;
 
 static void dss_clk_enable_all_no_ctx(void);
@@ -284,9 +289,11 @@ static void dss_clk_enable_no_ctx(enum dss_clock clks)
 
 void dss_clk_enable(enum dss_clock clks)
 {
+	bool check_ctx = core.num_clks_enabled == 0;
+
 	dss_clk_enable_no_ctx(clks);
 
-	if (cpu_is_omap34xx() && dss_need_ctx_restore())
+	if (check_ctx && cpu_is_omap34xx() && dss_need_ctx_restore())
 		restore_all_ctx();
 }
 
@@ -352,6 +359,50 @@ static void dss_clk_disable_all(void)
 	dss_clk_disable(clks);
 }
 
+/* REGULATORS */
+
+struct regulator *dss_get_vdds_dsi(void)
+{
+	struct regulator *reg;
+
+	if (core.vdds_dsi_reg != NULL)
+		return core.vdds_dsi_reg;
+
+	reg = regulator_get(&core.pdev->dev, "vdds_dsi");
+	if (!IS_ERR(reg))
+		core.vdds_dsi_reg = reg;
+
+	return reg;
+}
+
+struct regulator *dss_get_vdds_sdi(void)
+{
+	struct regulator *reg;
+
+	if (core.vdds_sdi_reg != NULL)
+		return core.vdds_sdi_reg;
+
+	reg = regulator_get(&core.pdev->dev, "vdds_sdi");
+	if (!IS_ERR(reg))
+		core.vdds_sdi_reg = reg;
+
+	return reg;
+}
+
+struct regulator *dss_get_vdda_dac(void)
+{
+	struct regulator *reg;
+
+	if (core.vdda_dac_reg != NULL)
+		return core.vdda_dac_reg;
+
+	reg = regulator_get(&core.pdev->dev, "vdda_dac");
+	if (!IS_ERR(reg))
+		core.vdda_dac_reg = reg;
+
+	return reg;
+}
+
 /* DEBUGFS */
 #if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
 static void dss_debug_dump_clocks(struct seq_file *s)
@@ -397,10 +448,12 @@ static int dss_initialize_debugfs(void)
 	debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir,
 			&dss_debug_dump_clocks, &dss_debug_fops);
 
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
 	debugfs_create_file("dispc_irq", S_IRUGO, dss_debugfs_dir,
 			&dispc_dump_irqs, &dss_debug_fops);
+#endif
 
-#ifdef CONFIG_OMAP2_DSS_DSI
+#if defined(CONFIG_OMAP2_DSS_DSI) && defined(CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS)
 	debugfs_create_file("dsi_irq", S_IRUGO, dss_debugfs_dir,
 			&dsi_dump_irqs, &dss_debug_fops);
 #endif
@@ -473,7 +526,7 @@ static int omap_dss_probe(struct platform_device *pdev)
 	}
 #endif
 
-	r = dpi_init();
+	r = dpi_init(pdev);
 	if (r) {
 		DSSERR("Failed to initialize dpi\n");
 		goto fail0;
@@ -718,16 +771,14 @@ static int dss_driver_probe(struct device *dev)
 
 	dss_init_device(core.pdev, dssdev);
 
-	/* skip this if the device is behind a ctrl */
-	if (!dssdev->panel.ctrl) {
-		force = pdata->default_device == dssdev;
-		dss_recheck_connections(dssdev, force);
-	}
+	force = pdata->default_device == dssdev;
+	dss_recheck_connections(dssdev, force);
 
 	r = dssdrv->probe(dssdev);
 
 	if (r) {
 		DSSERR("driver probe failed: %d\n", r);
+		dss_uninit_device(core.pdev, dssdev);
 		return r;
 	}
 
@@ -760,6 +811,13 @@ int omap_dss_register_driver(struct omap_dss_driver *dssdriver)
 	dssdriver->driver.bus = &dss_bus_type;
 	dssdriver->driver.probe = dss_driver_probe;
 	dssdriver->driver.remove = dss_driver_remove;
+
+	if (dssdriver->get_resolution == NULL)
+		dssdriver->get_resolution = omapdss_default_get_resolution;
+	if (dssdriver->get_recommended_bpp == NULL)
+		dssdriver->get_recommended_bpp =
+			omapdss_default_get_recommended_bpp;
+
 	return driver_register(&dssdriver->driver);
 }
 EXPORT_SYMBOL(omap_dss_register_driver);
@@ -808,8 +866,6 @@ static void omap_dss_dev_release(struct device *dev)
 int omap_dss_register_device(struct omap_dss_device *dssdev)
 {
 	static int dev_num;
-	static int panel_num;
-	int r;
 
 	WARN_ON(!dssdev->driver_name);
 
@@ -818,36 +874,12 @@ int omap_dss_register_device(struct omap_dss_device *dssdev)
 	dssdev->dev.parent = &dss_bus;
 	dssdev->dev.release = omap_dss_dev_release;
 	dev_set_name(&dssdev->dev, "display%d", dev_num++);
-	r = device_register(&dssdev->dev);
-	if (r)
-		return r;
-
-	if (dssdev->ctrl.panel) {
-		struct omap_dss_device *panel = dssdev->ctrl.panel;
-
-		panel->panel.ctrl = dssdev;
-
-		reset_device(&panel->dev, 1);
-		panel->dev.bus = &dss_bus_type;
-		panel->dev.parent = &dssdev->dev;
-		panel->dev.release = omap_dss_dev_release;
-		dev_set_name(&panel->dev, "panel%d", panel_num++);
-		r = device_register(&panel->dev);
-		if (r)
-			return r;
-	}
-
-	return 0;
+	return device_register(&dssdev->dev);
 }
 
 void omap_dss_unregister_device(struct omap_dss_device *dssdev)
 {
 	device_unregister(&dssdev->dev);
-
-	if (dssdev->ctrl.panel) {
-		struct omap_dss_device *panel = dssdev->ctrl.panel;
-		device_unregister(&panel->dev);
-	}
 }
 
 /* BUS */
@@ -901,6 +933,21 @@ static int __init omap_dss_init(void)
 
 static void __exit omap_dss_exit(void)
 {
+	if (core.vdds_dsi_reg != NULL) {
+		regulator_put(core.vdds_dsi_reg);
+		core.vdds_dsi_reg = NULL;
+	}
+
+	if (core.vdds_sdi_reg != NULL) {
+		regulator_put(core.vdds_sdi_reg);
+		core.vdds_sdi_reg = NULL;
+	}
+
+	if (core.vdda_dac_reg != NULL) {
+		regulator_put(core.vdda_dac_reg);
+		core.vdda_dac_reg = NULL;
+	}
+
 	platform_driver_unregister(&omap_dss_driver);
 
 	omap_dss_bus_unregister();
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index de8bfbac9e26..e777e352dbcd 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1725,7 +1725,7 @@ static void _enable_lcd_out(bool enable)
 	REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0);
 }
 
-void dispc_enable_lcd_out(bool enable)
+static void dispc_enable_lcd_out(bool enable)
 {
 	struct completion frame_done_completion;
 	bool is_on;
@@ -1772,7 +1772,7 @@ static void _enable_digit_out(bool enable)
 	REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1);
 }
 
-void dispc_enable_digit_out(bool enable)
+static void dispc_enable_digit_out(bool enable)
 {
 	struct completion frame_done_completion;
 	int r;
@@ -1836,6 +1836,26 @@ void dispc_enable_digit_out(bool enable)
 	enable_clocks(0);
 }
 
+bool dispc_is_channel_enabled(enum omap_channel channel)
+{
+	if (channel == OMAP_DSS_CHANNEL_LCD)
+		return !!REG_GET(DISPC_CONTROL, 0, 0);
+	else if (channel == OMAP_DSS_CHANNEL_DIGIT)
+		return !!REG_GET(DISPC_CONTROL, 1, 1);
+	else
+		BUG();
+}
+
+void dispc_enable_channel(enum omap_channel channel, bool enable)
+{
+	if (channel == OMAP_DSS_CHANNEL_LCD)
+		dispc_enable_lcd_out(enable);
+	else if (channel == OMAP_DSS_CHANNEL_DIGIT)
+		dispc_enable_digit_out(enable);
+	else
+		BUG();
+}
+
 void dispc_lcd_enable_signal_polarity(bool act_high)
 {
 	enable_clocks(1);
@@ -2198,7 +2218,7 @@ unsigned long dispc_fclk_rate(void)
 {
 	unsigned long r = 0;
 
-	if (dss_get_dispc_clk_source() == 0)
+	if (dss_get_dispc_clk_source() == DSS_SRC_DSS1_ALWON_FCLK)
 		r = dss_clk_get_rate(DSS_CLK_FCK1);
 	else
 #ifdef CONFIG_OMAP2_DSS_DSI
@@ -2251,7 +2271,7 @@ void dispc_dump_clocks(struct seq_file *s)
 	seq_printf(s, "- DISPC -\n");
 
 	seq_printf(s, "dispc fclk source = %s\n",
-			dss_get_dispc_clk_source() == 0 ?
+			dss_get_dispc_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ?
 			"dss1_alwon_fclk" : "dsi1_pll_fclk");
 
 	seq_printf(s, "fck\t\t%-16lu\n", dispc_fclk_rate());
@@ -2301,8 +2321,6 @@ void dispc_dump_irqs(struct seq_file *s)
 	PIS(WAKEUP);
 #undef PIS
 }
-#else
-void dispc_dump_irqs(struct seq_file *s) { }
 #endif
 
 void dispc_dump_regs(struct seq_file *s)
@@ -2854,12 +2872,13 @@ static void dispc_error_worker(struct work_struct *work)
 				manager = mgr;
 				enable = mgr->device->state ==
 						OMAP_DSS_DISPLAY_ACTIVE;
-				mgr->device->disable(mgr->device);
+				mgr->device->driver->disable(mgr->device);
 				break;
 			}
 		}
 
 		if (manager) {
+			struct omap_dss_device *dssdev = manager->device;
 			for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
 				struct omap_overlay *ovl;
 				ovl = omap_dss_get_overlay(i);
@@ -2874,7 +2893,7 @@ static void dispc_error_worker(struct work_struct *work)
 			dispc_go(manager->id);
 			mdelay(50);
 			if (enable)
-				manager->device->enable(manager->device);
+				dssdev->driver->enable(dssdev);
 		}
 	}
 
@@ -2892,12 +2911,13 @@ static void dispc_error_worker(struct work_struct *work)
 				manager = mgr;
 				enable = mgr->device->state ==
 						OMAP_DSS_DISPLAY_ACTIVE;
-				mgr->device->disable(mgr->device);
+				mgr->device->driver->disable(mgr->device);
 				break;
 			}
 		}
 
 		if (manager) {
+			struct omap_dss_device *dssdev = manager->device;
 			for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
 				struct omap_overlay *ovl;
 				ovl = omap_dss_get_overlay(i);
@@ -2912,7 +2932,7 @@ static void dispc_error_worker(struct work_struct *work)
 			dispc_go(manager->id);
 			mdelay(50);
 			if (enable)
-				manager->device->enable(manager->device);
+				dssdev->driver->enable(dssdev);
 		}
 	}
 
@@ -2923,7 +2943,7 @@ static void dispc_error_worker(struct work_struct *work)
 			mgr = omap_dss_get_overlay_manager(i);
 
 			if (mgr->caps & OMAP_DSS_OVL_CAP_DISPC)
-				mgr->device->disable(mgr->device);
+				mgr->device->driver->disable(mgr->device);
 		}
 	}
 
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 3b92b84b9560..6a74ea116d29 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -53,11 +53,11 @@ static ssize_t display_enabled_store(struct device *dev,
 
 	if (enabled != (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)) {
 		if (enabled) {
-			r = dssdev->enable(dssdev);
+			r = dssdev->driver->enable(dssdev);
 			if (r)
 				return r;
 		} else {
-			dssdev->disable(dssdev);
+			dssdev->driver->disable(dssdev);
 		}
 	}
 
@@ -69,8 +69,8 @@ static ssize_t display_upd_mode_show(struct device *dev,
 {
 	struct omap_dss_device *dssdev = to_dss_device(dev);
 	enum omap_dss_update_mode mode = OMAP_DSS_UPDATE_AUTO;
-	if (dssdev->get_update_mode)
-		mode = dssdev->get_update_mode(dssdev);
+	if (dssdev->driver->get_update_mode)
+		mode = dssdev->driver->get_update_mode(dssdev);
 	return snprintf(buf, PAGE_SIZE, "%d\n", mode);
 }
 
@@ -94,7 +94,7 @@ static ssize_t display_upd_mode_store(struct device *dev,
 		return -EINVAL;
 	}
 
-	r = dssdev->set_update_mode(dssdev, mode);
+	r = dssdev->driver->set_update_mode(dssdev, mode);
 	if (r)
 		return r;
 
@@ -106,7 +106,8 @@ static ssize_t display_tear_show(struct device *dev,
 {
 	struct omap_dss_device *dssdev = to_dss_device(dev);
 	return snprintf(buf, PAGE_SIZE, "%d\n",
-			dssdev->get_te ? dssdev->get_te(dssdev) : 0);
+			dssdev->driver->get_te ?
+			dssdev->driver->get_te(dssdev) : 0);
 }
 
 static ssize_t display_tear_store(struct device *dev,
@@ -116,12 +117,12 @@ static ssize_t display_tear_store(struct device *dev,
 	unsigned long te;
 	int r;
 
-	if (!dssdev->enable_te || !dssdev->get_te)
+	if (!dssdev->driver->enable_te || !dssdev->driver->get_te)
 		return -ENOENT;
 
 	te = simple_strtoul(buf, NULL, 0);
 
-	r = dssdev->enable_te(dssdev, te);
+	r = dssdev->driver->enable_te(dssdev, te);
 	if (r)
 		return r;
 
@@ -134,10 +135,10 @@ static ssize_t display_timings_show(struct device *dev,
 	struct omap_dss_device *dssdev = to_dss_device(dev);
 	struct omap_video_timings t;
 
-	if (!dssdev->get_timings)
+	if (!dssdev->driver->get_timings)
 		return -ENOENT;
 
-	dssdev->get_timings(dssdev, &t);
+	dssdev->driver->get_timings(dssdev, &t);
 
 	return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n",
 			t.pixel_clock,
@@ -152,7 +153,7 @@ static ssize_t display_timings_store(struct device *dev,
 	struct omap_video_timings t;
 	int r, found;
 
-	if (!dssdev->set_timings || !dssdev->check_timings)
+	if (!dssdev->driver->set_timings || !dssdev->driver->check_timings)
 		return -ENOENT;
 
 	found = 0;
@@ -171,11 +172,11 @@ static ssize_t display_timings_store(struct device *dev,
 				&t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9)
 		return -EINVAL;
 
-	r = dssdev->check_timings(dssdev, &t);
+	r = dssdev->driver->check_timings(dssdev, &t);
 	if (r)
 		return r;
 
-	dssdev->set_timings(dssdev, &t);
+	dssdev->driver->set_timings(dssdev, &t);
 
 	return size;
 }
@@ -185,9 +186,9 @@ static ssize_t display_rotate_show(struct device *dev,
 {
 	struct omap_dss_device *dssdev = to_dss_device(dev);
 	int rotate;
-	if (!dssdev->get_rotate)
+	if (!dssdev->driver->get_rotate)
 		return -ENOENT;
-	rotate = dssdev->get_rotate(dssdev);
+	rotate = dssdev->driver->get_rotate(dssdev);
 	return snprintf(buf, PAGE_SIZE, "%u\n", rotate);
 }
 
@@ -198,12 +199,12 @@ static ssize_t display_rotate_store(struct device *dev,
 	unsigned long rot;
 	int r;
 
-	if (!dssdev->set_rotate || !dssdev->get_rotate)
+	if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate)
 		return -ENOENT;
 
 	rot = simple_strtoul(buf, NULL, 0);
 
-	r = dssdev->set_rotate(dssdev, rot);
+	r = dssdev->driver->set_rotate(dssdev, rot);
 	if (r)
 		return r;
 
@@ -215,9 +216,9 @@ static ssize_t display_mirror_show(struct device *dev,
 {
 	struct omap_dss_device *dssdev = to_dss_device(dev);
 	int mirror;
-	if (!dssdev->get_mirror)
+	if (!dssdev->driver->get_mirror)
 		return -ENOENT;
-	mirror = dssdev->get_mirror(dssdev);
+	mirror = dssdev->driver->get_mirror(dssdev);
 	return snprintf(buf, PAGE_SIZE, "%u\n", mirror);
 }
 
@@ -228,12 +229,12 @@ static ssize_t display_mirror_store(struct device *dev,
 	unsigned long mirror;
 	int r;
 
-	if (!dssdev->set_mirror || !dssdev->get_mirror)
+	if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
 		return -ENOENT;
 
 	mirror = simple_strtoul(buf, NULL, 0);
 
-	r = dssdev->set_mirror(dssdev, mirror);
+	r = dssdev->driver->set_mirror(dssdev, mirror);
 	if (r)
 		return r;
 
@@ -246,10 +247,10 @@ static ssize_t display_wss_show(struct device *dev,
 	struct omap_dss_device *dssdev = to_dss_device(dev);
 	unsigned int wss;
 
-	if (!dssdev->get_wss)
+	if (!dssdev->driver->get_wss)
 		return -ENOENT;
 
-	wss = dssdev->get_wss(dssdev);
+	wss = dssdev->driver->get_wss(dssdev);
 
 	return snprintf(buf, PAGE_SIZE, "0x%05x\n", wss);
 }
@@ -261,7 +262,7 @@ static ssize_t display_wss_store(struct device *dev,
 	unsigned long wss;
 	int r;
 
-	if (!dssdev->get_wss || !dssdev->set_wss)
+	if (!dssdev->driver->get_wss || !dssdev->driver->set_wss)
 		return -ENOENT;
 
 	if (strict_strtoul(buf, 0, &wss))
@@ -270,7 +271,7 @@ static ssize_t display_wss_store(struct device *dev,
 	if (wss > 0xfffff)
 		return -EINVAL;
 
-	r = dssdev->set_wss(dssdev, wss);
+	r = dssdev->driver->set_wss(dssdev, wss);
 	if (r)
 		return r;
 
@@ -303,12 +304,13 @@ static struct device_attribute *display_sysfs_attrs[] = {
 	NULL
 };
 
-static void default_get_resolution(struct omap_dss_device *dssdev,
+void omapdss_default_get_resolution(struct omap_dss_device *dssdev,
 			u16 *xres, u16 *yres)
 {
 	*xres = dssdev->panel.timings.x_res;
 	*yres = dssdev->panel.timings.y_res;
 }
+EXPORT_SYMBOL(omapdss_default_get_resolution);
 
 void default_get_overlay_fifo_thresholds(enum omap_plane plane,
 		u32 fifo_size, enum omap_burst_size *burst_size,
@@ -323,24 +325,8 @@ void default_get_overlay_fifo_thresholds(enum omap_plane plane,
 	*fifo_low = fifo_size - burst_size_bytes;
 }
 
-static int default_wait_vsync(struct omap_dss_device *dssdev)
+int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev)
 {
-	unsigned long timeout = msecs_to_jiffies(500);
-	u32 irq;
-
-	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC)
-		irq = DISPC_IRQ_EVSYNC_ODD;
-	else
-		irq = DISPC_IRQ_VSYNC;
-
-	return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
-}
-
-static int default_get_recommended_bpp(struct omap_dss_device *dssdev)
-{
-	if (dssdev->panel.recommended_bpp)
-		return dssdev->panel.recommended_bpp;
-
 	switch (dssdev->type) {
 	case OMAP_DISPLAY_TYPE_DPI:
 		if (dssdev->phy.dpi.data_lines == 24)
@@ -362,6 +348,7 @@ static int default_get_recommended_bpp(struct omap_dss_device *dssdev)
 		BUG();
 	}
 }
+EXPORT_SYMBOL(omapdss_default_get_recommended_bpp);
 
 /* Checks if replication logic should be used. Only use for active matrix,
  * when overlay is in RGB12U or RGB16 mode, and LCD interface is
@@ -425,10 +412,6 @@ void dss_init_device(struct platform_device *pdev,
 		return;
 	}
 
-	dssdev->get_resolution = default_get_resolution;
-	dssdev->get_recommended_bpp = default_get_recommended_bpp;
-	dssdev->wait_vsync = default_wait_vsync;
-
 	switch (dssdev->type) {
 	case OMAP_DISPLAY_TYPE_DPI:
 		r = dpi_init_display(dssdev);
@@ -502,13 +485,13 @@ static int dss_suspend_device(struct device *dev, void *data)
 		return 0;
 	}
 
-	if (!dssdev->suspend) {
+	if (!dssdev->driver->suspend) {
 		DSSERR("display '%s' doesn't implement suspend\n",
 				dssdev->name);
 		return -ENOSYS;
 	}
 
-	r = dssdev->suspend(dssdev);
+	r = dssdev->driver->suspend(dssdev);
 	if (r)
 		return r;
 
@@ -537,8 +520,8 @@ static int dss_resume_device(struct device *dev, void *data)
 	int r;
 	struct omap_dss_device *dssdev = to_dss_device(dev);
 
-	if (dssdev->activate_after_resume && dssdev->resume) {
-		r = dssdev->resume(dssdev);
+	if (dssdev->activate_after_resume && dssdev->driver->resume) {
+		r = dssdev->driver->resume(dssdev);
 		if (r)
 			return r;
 	}
@@ -558,7 +541,7 @@ int dss_resume_all_devices(void)
 static int dss_disable_device(struct device *dev, void *data)
 {
 	struct omap_dss_device *dssdev = to_dss_device(dev);
-	dssdev->disable(dssdev);
+	dssdev->driver->disable(dssdev);
 	return 0;
 }
 
@@ -591,10 +574,6 @@ struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from)
 
 	int match(struct device *dev, void *data)
 	{
-		/* skip panels connected to controllers */
-		if (to_dss_device(dev)->panel.ctrl)
-			return 0;
-
 		return 1;
 	}
 
@@ -626,45 +605,21 @@ EXPORT_SYMBOL(omap_dss_find_device);
 
 int omap_dss_start_device(struct omap_dss_device *dssdev)
 {
-	int r;
-
 	if (!dssdev->driver) {
 		DSSDBG("no driver\n");
-		r = -ENODEV;
-		goto err0;
-	}
-
-	if (dssdev->ctrl.panel && !dssdev->ctrl.panel->driver) {
-		DSSDBG("no panel driver\n");
-		r = -ENODEV;
-		goto err0;
+		return -ENODEV;
 	}
 
 	if (!try_module_get(dssdev->dev.driver->owner)) {
-		r = -ENODEV;
-		goto err0;
-	}
-
-	if (dssdev->ctrl.panel) {
-		if (!try_module_get(dssdev->ctrl.panel->dev.driver->owner)) {
-			r = -ENODEV;
-			goto err1;
-		}
+		return -ENODEV;
 	}
 
 	return 0;
-err1:
-	module_put(dssdev->dev.driver->owner);
-err0:
-	return r;
 }
 EXPORT_SYMBOL(omap_dss_start_device);
 
 void omap_dss_stop_device(struct omap_dss_device *dssdev)
 {
-	if (dssdev->ctrl.panel)
-		module_put(dssdev->ctrl.panel->dev.driver->owner);
-
 	module_put(dssdev->dev.driver->owner);
 }
 EXPORT_SYMBOL(omap_dss_stop_device);
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 2d71031baa25..960e977a8bf0 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -25,7 +25,10 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/err.h>
 #include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 #include <plat/display.h>
 #include <plat/cpu.h>
@@ -33,7 +36,7 @@
 #include "dss.h"
 
 static struct {
-	int update_enabled;
+	struct regulator *vdds_dsi_reg;
 } dpi;
 
 #ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
@@ -53,7 +56,7 @@ static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req,
 	if (r)
 		return r;
 
-	dss_select_clk_source(0, 1);
+	dss_select_dispc_clk_source(DSS_SRC_DSI1_PLL_FCLK);
 
 	r = dispc_set_clock_div(&dispc_cinfo);
 	if (r)
@@ -150,7 +153,7 @@ static int dpi_basic_init(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static int dpi_display_enable(struct omap_dss_device *dssdev)
+int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
 {
 	int r;
 
@@ -160,10 +163,10 @@ static int dpi_display_enable(struct omap_dss_device *dssdev)
 		goto err0;
 	}
 
-	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
-		DSSERR("display already enabled\n");
-		r = -EINVAL;
-		goto err1;
+	if (cpu_is_omap34xx()) {
+		r = regulator_enable(dpi.vdds_dsi_reg);
+		if (r)
+			goto err1;
 	}
 
 	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
@@ -184,18 +187,10 @@ static int dpi_display_enable(struct omap_dss_device *dssdev)
 
 	mdelay(2);
 
-	dispc_enable_lcd_out(1);
-
-	r = dssdev->driver->enable(dssdev);
-	if (r)
-		goto err5;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+	dssdev->manager->enable(dssdev->manager);
 
 	return 0;
 
-err5:
-	dispc_enable_lcd_out(0);
 err4:
 #ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
 	dsi_pll_uninit();
@@ -204,78 +199,35 @@ err3:
 #endif
 err2:
 	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+	if (cpu_is_omap34xx())
+		regulator_disable(dpi.vdds_dsi_reg);
 err1:
 	omap_dss_stop_device(dssdev);
 err0:
 	return r;
 }
+EXPORT_SYMBOL(omapdss_dpi_display_enable);
 
-static int dpi_display_resume(struct omap_dss_device *dssdev);
-
-static void dpi_display_disable(struct omap_dss_device *dssdev)
+void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
 {
-	if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
-		return;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
-		dpi_display_resume(dssdev);
-
-	dssdev->driver->disable(dssdev);
-
-	dispc_enable_lcd_out(0);
+	dssdev->manager->disable(dssdev->manager);
 
 #ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
-	dss_select_clk_source(0, 0);
+	dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
 	dsi_pll_uninit();
 	dss_clk_disable(DSS_CLK_FCK2);
 #endif
 
 	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
 
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+	if (cpu_is_omap34xx())
+		regulator_disable(dpi.vdds_dsi_reg);
 
 	omap_dss_stop_device(dssdev);
 }
+EXPORT_SYMBOL(omapdss_dpi_display_disable);
 
-static int dpi_display_suspend(struct omap_dss_device *dssdev)
-{
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return -EINVAL;
-
-	DSSDBG("dpi_display_suspend\n");
-
-	if (dssdev->driver->suspend)
-		dssdev->driver->suspend(dssdev);
-
-	dispc_enable_lcd_out(0);
-
-	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
-
-	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
-
-	return 0;
-}
-
-static int dpi_display_resume(struct omap_dss_device *dssdev)
-{
-	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED)
-		return -EINVAL;
-
-	DSSDBG("dpi_display_resume\n");
-
-	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
-
-	dispc_enable_lcd_out(1);
-
-	if (dssdev->driver->resume)
-		dssdev->driver->resume(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void dpi_set_timings(struct omap_dss_device *dssdev,
+void dpi_set_timings(struct omap_dss_device *dssdev,
 			struct omap_video_timings *timings)
 {
 	DSSDBG("dpi_set_timings\n");
@@ -285,8 +237,9 @@ static void dpi_set_timings(struct omap_dss_device *dssdev,
 		dispc_go(OMAP_DSS_CHANNEL_LCD);
 	}
 }
+EXPORT_SYMBOL(dpi_set_timings);
 
-static int dpi_check_timings(struct omap_dss_device *dssdev,
+int dpi_check_timings(struct omap_dss_device *dssdev,
 			struct omap_video_timings *timings)
 {
 	bool is_tft;
@@ -340,56 +293,25 @@ static int dpi_check_timings(struct omap_dss_device *dssdev,
 
 	return 0;
 }
-
-static void dpi_get_timings(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings)
-{
-	*timings = dssdev->panel.timings;
-}
-
-static int dpi_display_set_update_mode(struct omap_dss_device *dssdev,
-		enum omap_dss_update_mode mode)
-{
-	if (mode == OMAP_DSS_UPDATE_MANUAL)
-		return -EINVAL;
-
-	if (mode == OMAP_DSS_UPDATE_DISABLED) {
-		dispc_enable_lcd_out(0);
-		dpi.update_enabled = 0;
-	} else {
-		dispc_enable_lcd_out(1);
-		dpi.update_enabled = 1;
-	}
-
-	return 0;
-}
-
-static enum omap_dss_update_mode dpi_display_get_update_mode(
-		struct omap_dss_device *dssdev)
-{
-	return dpi.update_enabled ? OMAP_DSS_UPDATE_AUTO :
-		OMAP_DSS_UPDATE_DISABLED;
-}
+EXPORT_SYMBOL(dpi_check_timings);
 
 int dpi_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("init_display\n");
 
-	dssdev->enable = dpi_display_enable;
-	dssdev->disable = dpi_display_disable;
-	dssdev->suspend = dpi_display_suspend;
-	dssdev->resume = dpi_display_resume;
-	dssdev->set_timings = dpi_set_timings;
-	dssdev->check_timings = dpi_check_timings;
-	dssdev->get_timings = dpi_get_timings;
-	dssdev->set_update_mode = dpi_display_set_update_mode;
-	dssdev->get_update_mode = dpi_display_get_update_mode;
-
 	return 0;
 }
 
-int dpi_init(void)
+int dpi_init(struct platform_device *pdev)
 {
+	if (cpu_is_omap34xx()) {
+		dpi.vdds_dsi_reg = dss_get_vdds_dsi();
+		if (IS_ERR(dpi.vdds_dsi_reg)) {
+			DSSERR("can't get VDDS_DSI regulator\n");
+			return PTR_ERR(dpi.vdds_dsi_reg);
+		}
+	}
+
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 6122178f5f85..3af207b2bde3 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -27,11 +27,12 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
+#include <linux/semaphore.h>
 #include <linux/seq_file.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
-#include <linux/kthread.h>
 #include <linux/wait.h>
+#include <linux/workqueue.h>
 
 #include <plat/display.h>
 #include <plat/clock.h>
@@ -199,7 +200,6 @@ enum dsi_vc_mode {
 };
 
 struct dsi_update_region {
-	bool dirty;
 	u16 x, y, w, h;
 	struct omap_dss_device *device;
 };
@@ -224,29 +224,25 @@ static struct
 		enum dsi_vc_mode mode;
 		struct omap_dss_device *dssdev;
 		enum fifo_size fifo_size;
-		int dest_per;	/* destination peripheral 0-3 */
 	} vc[4];
 
 	struct mutex lock;
-	struct mutex bus_lock;
+	struct semaphore bus_lock;
 
 	unsigned pll_locked;
 
 	struct completion bta_completion;
 
-	struct task_struct *thread;
-	wait_queue_head_t waitqueue;
-
-	spinlock_t update_lock;
-	bool framedone_received;
+	int update_channel;
 	struct dsi_update_region update_region;
-	struct dsi_update_region active_update_region;
-	struct completion update_completion;
 
-	enum omap_dss_update_mode user_update_mode;
-	enum omap_dss_update_mode update_mode;
 	bool te_enabled;
-	bool use_ext_te;
+
+	struct work_struct framedone_work;
+	void (*framedone_callback)(int, void *);
+	void *framedone_data;
+
+	struct delayed_work framedone_timeout_work;
 
 #ifdef DSI_CATCH_MISSING_TE
 	struct timer_list te_timer;
@@ -261,8 +257,6 @@ static struct
 #ifdef DEBUG
 	ktime_t perf_setup_time;
 	ktime_t perf_start_time;
-	ktime_t perf_start_time_auto;
-	int perf_measure_frames;
 #endif
 	int debug_read;
 	int debug_write;
@@ -299,16 +293,21 @@ void dsi_restore_context(void)
 
 void dsi_bus_lock(void)
 {
-	mutex_lock(&dsi.bus_lock);
+	down(&dsi.bus_lock);
 }
 EXPORT_SYMBOL(dsi_bus_lock);
 
 void dsi_bus_unlock(void)
 {
-	mutex_unlock(&dsi.bus_lock);
+	up(&dsi.bus_lock);
 }
 EXPORT_SYMBOL(dsi_bus_unlock);
 
+static bool dsi_bus_is_locked(void)
+{
+	return dsi.bus_lock.count == 0;
+}
+
 static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum,
 		int value)
 {
@@ -333,12 +332,6 @@ static void dsi_perf_mark_start(void)
 	dsi.perf_start_time = ktime_get();
 }
 
-static void dsi_perf_mark_start_auto(void)
-{
-	dsi.perf_measure_frames = 0;
-	dsi.perf_start_time_auto = ktime_get();
-}
-
 static void dsi_perf_show(const char *name)
 {
 	ktime_t t, setup_time, trans_time;
@@ -348,9 +341,6 @@ static void dsi_perf_show(const char *name)
 	if (!dsi_perf)
 		return;
 
-	if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED)
-		return;
-
 	t = ktime_get();
 
 	setup_time = ktime_sub(dsi.perf_start_time, dsi.perf_setup_time);
@@ -365,76 +355,23 @@ static void dsi_perf_show(const char *name)
 
 	total_us = setup_us + trans_us;
 
-	total_bytes = dsi.active_update_region.w *
-		dsi.active_update_region.h *
-		dsi.active_update_region.device->ctrl.pixel_size / 8;
-
-	if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) {
-		static u32 s_total_trans_us, s_total_setup_us;
-		static u32 s_min_trans_us = 0xffffffff, s_min_setup_us;
-		static u32 s_max_trans_us, s_max_setup_us;
-		const int numframes = 100;
-		ktime_t total_time_auto;
-		u32 total_time_auto_us;
-
-		dsi.perf_measure_frames++;
-
-		if (setup_us < s_min_setup_us)
-			s_min_setup_us = setup_us;
+	total_bytes = dsi.update_region.w *
+		dsi.update_region.h *
+		dsi.update_region.device->ctrl.pixel_size / 8;
 
-		if (setup_us > s_max_setup_us)
-			s_max_setup_us = setup_us;
-
-		s_total_setup_us += setup_us;
-
-		if (trans_us < s_min_trans_us)
-			s_min_trans_us = trans_us;
-
-		if (trans_us > s_max_trans_us)
-			s_max_trans_us = trans_us;
-
-		s_total_trans_us += trans_us;
-
-		if (dsi.perf_measure_frames < numframes)
-			return;
-
-		total_time_auto = ktime_sub(t, dsi.perf_start_time_auto);
-		total_time_auto_us = (u32)ktime_to_us(total_time_auto);
-
-		printk(KERN_INFO "DSI(%s): %u fps, setup %u/%u/%u, "
-				"trans %u/%u/%u\n",
-				name,
-				1000 * 1000 * numframes / total_time_auto_us,
-				s_min_setup_us,
-				s_max_setup_us,
-				s_total_setup_us / numframes,
-				s_min_trans_us,
-				s_max_trans_us,
-				s_total_trans_us / numframes);
-
-		s_total_setup_us = 0;
-		s_min_setup_us = 0xffffffff;
-		s_max_setup_us = 0;
-		s_total_trans_us = 0;
-		s_min_trans_us = 0xffffffff;
-		s_max_trans_us = 0;
-		dsi_perf_mark_start_auto();
-	} else {
-		printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), "
-				"%u bytes, %u kbytes/sec\n",
-				name,
-				setup_us,
-				trans_us,
-				total_us,
-				1000*1000 / total_us,
-				total_bytes,
-				total_bytes * 1000 / total_us);
-	}
+	printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), "
+			"%u bytes, %u kbytes/sec\n",
+			name,
+			setup_us,
+			trans_us,
+			total_us,
+			1000*1000 / total_us,
+			total_bytes,
+			total_bytes * 1000 / total_us);
 }
 #else
 #define dsi_perf_mark_setup()
 #define dsi_perf_mark_start()
-#define dsi_perf_mark_start_auto()
 #define dsi_perf_show(x)
 #endif
 
@@ -774,7 +711,7 @@ static unsigned long dsi_fclk_rate(void)
 {
 	unsigned long r;
 
-	if (dss_get_dsi_clk_source() == 0) {
+	if (dss_get_dsi_clk_source() == DSS_SRC_DSS1_ALWON_FCLK) {
 		/* DSI FCLK source is DSS1_ALWON_FCK, which is dss1_fck */
 		r = dss_clk_get_rate(DSS_CLK_FCK1);
 	} else {
@@ -1227,17 +1164,19 @@ void dsi_dump_clocks(struct seq_file *s)
 	seq_printf(s,	"dsi1_pll_fck\t%-16luregm3 %u\t(%s)\n",
 			cinfo->dsi1_pll_fclk,
 			cinfo->regm3,
-			dss_get_dispc_clk_source() == 0 ? "off" : "on");
+			dss_get_dispc_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ?
+			"off" : "on");
 
 	seq_printf(s,	"dsi2_pll_fck\t%-16luregm4 %u\t(%s)\n",
 			cinfo->dsi2_pll_fclk,
 			cinfo->regm4,
-			dss_get_dsi_clk_source() == 0 ? "off" : "on");
+			dss_get_dsi_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ?
+			"off" : "on");
 
 	seq_printf(s,	"- DSI -\n");
 
 	seq_printf(s,	"dsi fclk source = %s\n",
-			dss_get_dsi_clk_source() == 0 ?
+			dss_get_dsi_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ?
 			"dss1_alwon_fclk" : "dsi2_pll_fclk");
 
 	seq_printf(s,	"DSI_FCLK\t%lu\n", dsi_fclk_rate());
@@ -1756,29 +1695,10 @@ static int dsi_force_tx_stop_mode_io(void)
 	return 0;
 }
 
-static void dsi_vc_print_status(int channel)
-{
-	u32 r;
-
-	r = dsi_read_reg(DSI_VC_CTRL(channel));
-	DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, "
-			"TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ",
-			channel,
-			FLD_GET(r, 5, 5),
-			FLD_GET(r, 6, 6),
-			FLD_GET(r, 15, 15),
-			FLD_GET(r, 16, 16),
-			FLD_GET(r, 20, 20));
-
-	r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS);
-	DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff);
-}
-
 static int dsi_vc_enable(int channel, bool enable)
 {
-	if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
-		DSSDBG("dsi_vc_enable channel %d, enable %d\n",
-				channel, enable);
+	DSSDBG("dsi_vc_enable channel %d, enable %d\n",
+			channel, enable);
 
 	enable = enable ? 1 : 0;
 
@@ -1859,10 +1779,12 @@ static void dsi_vc_config_vp(int channel)
 }
 
 
-static void dsi_vc_enable_hs(int channel, bool enable)
+void omapdss_dsi_vc_enable_hs(int channel, bool enable)
 {
 	DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable);
 
+	WARN_ON(!dsi_bus_is_locked());
+
 	dsi_vc_enable(channel, 0);
 	dsi_if_enable(0);
 
@@ -1873,6 +1795,7 @@ static void dsi_vc_enable_hs(int channel, bool enable)
 
 	dsi_force_tx_stop_mode_io();
 }
+EXPORT_SYMBOL(omapdss_dsi_vc_enable_hs);
 
 static void dsi_vc_flush_long_data(int channel)
 {
@@ -1955,11 +1878,10 @@ static u16 dsi_vc_flush_receive_data(int channel)
 
 static int dsi_vc_send_bta(int channel)
 {
-	if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO &&
-			(dsi.debug_write || dsi.debug_read))
+	if (dsi.debug_write || dsi.debug_read)
 		DSSDBG("dsi_vc_send_bta %d\n", channel);
 
-	WARN_ON(!mutex_is_locked(&dsi.bus_lock));
+	WARN_ON(!dsi_bus_is_locked());
 
 	if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {	/* RX_FIFO_NOT_EMPTY */
 		DSSERR("rx fifo not empty when sending BTA, dumping data:\n");
@@ -2010,10 +1932,9 @@ static inline void dsi_vc_write_long_header(int channel, u8 data_type,
 	u32 val;
 	u8 data_id;
 
-	WARN_ON(!mutex_is_locked(&dsi.bus_lock));
+	WARN_ON(!dsi_bus_is_locked());
 
-	/*data_id = data_type | channel << 6; */
-	data_id = data_type | dsi.vc[channel].dest_per << 6;
+	data_id = data_type | channel << 6;
 
 	val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) |
 		FLD_VAL(ecc, 31, 24);
@@ -2056,13 +1977,10 @@ static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len,
 
 	dsi_vc_write_long_header(channel, data_type, len, ecc);
 
-	/*dsi_vc_print_status(0); */
-
 	p = data;
 	for (i = 0; i < len >> 2; i++) {
 		if (dsi.debug_write)
 			DSSDBG("\tsending full packet %d\n", i);
-		/*dsi_vc_print_status(0); */
 
 		b1 = *p++;
 		b2 = *p++;
@@ -2105,7 +2023,7 @@ static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc)
 	u32 r;
 	u8 data_id;
 
-	WARN_ON(!mutex_is_locked(&dsi.bus_lock));
+	WARN_ON(!dsi_bus_is_locked());
 
 	if (dsi.debug_write)
 		DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n",
@@ -2119,7 +2037,7 @@ static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc)
 		return -EINVAL;
 	}
 
-	data_id = data_type | dsi.vc[channel].dest_per << 6;
+	data_id = data_type | channel << 6;
 
 	r = (data_id << 0) | (data << 8) | (ecc << 24);
 
@@ -2163,14 +2081,35 @@ int dsi_vc_dcs_write(int channel, u8 *data, int len)
 
 	r = dsi_vc_dcs_write_nosync(channel, data, len);
 	if (r)
-		return r;
+		goto err;
 
 	r = dsi_vc_send_bta_sync(channel);
+	if (r)
+		goto err;
 
+	return 0;
+err:
+	DSSERR("dsi_vc_dcs_write(ch %d, cmd 0x%02x, len %d) failed\n",
+			channel, data[0], len);
 	return r;
 }
 EXPORT_SYMBOL(dsi_vc_dcs_write);
 
+int dsi_vc_dcs_write_0(int channel, u8 dcs_cmd)
+{
+	return dsi_vc_dcs_write(channel, &dcs_cmd, 1);
+}
+EXPORT_SYMBOL(dsi_vc_dcs_write_0);
+
+int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param)
+{
+	u8 buf[2];
+	buf[0] = dcs_cmd;
+	buf[1] = param;
+	return dsi_vc_dcs_write(channel, buf, 2);
+}
+EXPORT_SYMBOL(dsi_vc_dcs_write_1);
+
 int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen)
 {
 	u32 val;
@@ -2182,16 +2121,17 @@ int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen)
 
 	r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0);
 	if (r)
-		return r;
+		goto err;
 
 	r = dsi_vc_send_bta_sync(channel);
 	if (r)
-		return r;
+		goto err;
 
 	/* RX_FIFO_NOT_EMPTY */
 	if (REG_GET(DSI_VC_CTRL(channel), 20, 20) == 0) {
 		DSSERR("RX fifo empty when trying to read.\n");
-		return -EIO;
+		r = -EIO;
+		goto err;
 	}
 
 	val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
@@ -2201,15 +2141,18 @@ int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen)
 	if (dt == DSI_DT_RX_ACK_WITH_ERR) {
 		u16 err = FLD_GET(val, 23, 8);
 		dsi_show_rx_ack_with_err(err);
-		return -EIO;
+		r = -EIO;
+		goto err;
 
 	} else if (dt == DSI_DT_RX_SHORT_READ_1) {
 		u8 data = FLD_GET(val, 15, 8);
 		if (dsi.debug_read)
 			DSSDBG("\tDCS short response, 1 byte: %02x\n", data);
 
-		if (buflen < 1)
-			return -EIO;
+		if (buflen < 1) {
+			r = -EIO;
+			goto err;
+		}
 
 		buf[0] = data;
 
@@ -2219,8 +2162,10 @@ int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen)
 		if (dsi.debug_read)
 			DSSDBG("\tDCS short response, 2 byte: %04x\n", data);
 
-		if (buflen < 2)
-			return -EIO;
+		if (buflen < 2) {
+			r = -EIO;
+			goto err;
+		}
 
 		buf[0] = data & 0xff;
 		buf[1] = (data >> 8) & 0xff;
@@ -2232,8 +2177,10 @@ int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen)
 		if (dsi.debug_read)
 			DSSDBG("\tDCS long response, len %d\n", len);
 
-		if (len > buflen)
-			return -EIO;
+		if (len > buflen) {
+			r = -EIO;
+			goto err;
+		}
 
 		/* two byte checksum ends the packet, not included in len */
 		for (w = 0; w < len + 2;) {
@@ -2255,14 +2202,52 @@ int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen)
 		}
 
 		return len;
-
 	} else {
 		DSSERR("\tunknown datatype 0x%02x\n", dt);
-		return -EIO;
+		r = -EIO;
+		goto err;
 	}
+
+	BUG();
+err:
+	DSSERR("dsi_vc_dcs_read(ch %d, cmd 0x%02x) failed\n",
+			channel, dcs_cmd);
+	return r;
+
 }
 EXPORT_SYMBOL(dsi_vc_dcs_read);
 
+int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data)
+{
+	int r;
+
+	r = dsi_vc_dcs_read(channel, dcs_cmd, data, 1);
+
+	if (r < 0)
+		return r;
+
+	if (r != 1)
+		return -EIO;
+
+	return 0;
+}
+EXPORT_SYMBOL(dsi_vc_dcs_read_1);
+
+int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data)
+{
+	int r;
+
+	r = dsi_vc_dcs_read(channel, dcs_cmd, (u8 *)data, 2);
+
+	if (r < 0)
+		return r;
+
+	if (r != 2)
+		return -EIO;
+
+	return 0;
+}
+EXPORT_SYMBOL(dsi_vc_dcs_read_2);
 
 int dsi_vc_set_max_rx_packet_size(int channel, u16 len)
 {
@@ -2491,15 +2476,15 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
 	u32 r;
 	int buswidth = 0;
 
-	dsi_config_tx_fifo(DSI_FIFO_SIZE_128,
-			DSI_FIFO_SIZE_0,
-			DSI_FIFO_SIZE_0,
-			DSI_FIFO_SIZE_0);
+	dsi_config_tx_fifo(DSI_FIFO_SIZE_32,
+			DSI_FIFO_SIZE_32,
+			DSI_FIFO_SIZE_32,
+			DSI_FIFO_SIZE_32);
 
-	dsi_config_rx_fifo(DSI_FIFO_SIZE_128,
-			DSI_FIFO_SIZE_0,
-			DSI_FIFO_SIZE_0,
-			DSI_FIFO_SIZE_0);
+	dsi_config_rx_fifo(DSI_FIFO_SIZE_32,
+			DSI_FIFO_SIZE_32,
+			DSI_FIFO_SIZE_32,
+			DSI_FIFO_SIZE_32);
 
 	/* XXX what values for the timeouts? */
 	dsi_set_stop_state_counter(1000);
@@ -2537,12 +2522,9 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
 	dsi_write_reg(DSI_CTRL, r);
 
 	dsi_vc_initial_config(0);
-
-	/* set all vc targets to peripheral 0 */
-	dsi.vc[0].dest_per = 0;
-	dsi.vc[1].dest_per = 0;
-	dsi.vc[2].dest_per = 0;
-	dsi.vc[3].dest_per = 0;
+	dsi_vc_initial_config(1);
+	dsi_vc_initial_config(2);
+	dsi_vc_initial_config(3);
 
 	return 0;
 }
@@ -2777,18 +2759,16 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
 	unsigned packet_payload;
 	unsigned packet_len;
 	u32 l;
-	bool use_te_trigger;
-	const unsigned channel = 0;
+	const unsigned channel = dsi.update_channel;
 	/* line buffer is 1024 x 24bits */
 	/* XXX: for some reason using full buffer size causes considerable TX
 	 * slowdown with update sizes that fill the whole buffer */
 	const unsigned line_buf_size = 1023 * 3;
 
-	use_te_trigger = dsi.te_enabled && !dsi.use_ext_te;
+	DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n",
+			x, y, w, h);
 
-	if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
-		DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n",
-				x, y, w, h);
+	dsi_vc_config_vp(channel);
 
 	bytespp	= dssdev->ctrl.pixel_size / 8;
 	bytespl = w * bytespp;
@@ -2808,15 +2788,12 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
 	if (bytespf % packet_payload)
 		total_len += (bytespf % packet_payload) + 1;
 
-	if (0)
-		dsi_vc_print_status(1);
-
 	l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */
 	dsi_write_reg(DSI_VC_TE(channel), l);
 
 	dsi_vc_write_long_header(channel, DSI_DT_DCS_LONG_WRITE, packet_len, 0);
 
-	if (use_te_trigger)
+	if (dsi.te_enabled)
 		l = FLD_MOD(l, 1, 30, 30); /* TE_EN */
 	else
 		l = FLD_MOD(l, 1, 31, 31); /* TE_START */
@@ -2830,9 +2807,14 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
 	 */
 	dispc_disable_sidle();
 
+	dsi_perf_mark_start();
+
+	schedule_delayed_work(&dsi.framedone_timeout_work,
+			msecs_to_jiffies(250));
+
 	dss_start_update(dssdev);
 
-	if (use_te_trigger) {
+	if (dsi.te_enabled) {
 		/* disable LP_RX_TO, so that we can receive TE.  Time to wait
 		 * for TE is longer than the timer allows */
 		REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */
@@ -2852,110 +2834,64 @@ static void dsi_te_timeout(unsigned long arg)
 }
 #endif
 
-static void dsi_framedone_irq_callback(void *data, u32 mask)
+static void dsi_framedone_timeout_work_callback(struct work_struct *work)
 {
-	/* Note: We get FRAMEDONE when DISPC has finished sending pixels and
-	 * turns itself off. However, DSI still has the pixels in its buffers,
-	 * and is sending the data.
-	 */
+	int r;
+	const int channel = dsi.update_channel;
+
+	DSSERR("Framedone not received for 250ms!\n");
 
 	/* SIDLEMODE back to smart-idle */
 	dispc_enable_sidle();
 
-	dsi.framedone_received = true;
-	wake_up(&dsi.waitqueue);
-}
-
-static void dsi_set_update_region(struct omap_dss_device *dssdev,
-		u16 x, u16 y, u16 w, u16 h)
-{
-	spin_lock(&dsi.update_lock);
-	if (dsi.update_region.dirty) {
-		dsi.update_region.x = min(x, dsi.update_region.x);
-		dsi.update_region.y = min(y, dsi.update_region.y);
-		dsi.update_region.w = max(w, dsi.update_region.w);
-		dsi.update_region.h = max(h, dsi.update_region.h);
-	} else {
-		dsi.update_region.x = x;
-		dsi.update_region.y = y;
-		dsi.update_region.w = w;
-		dsi.update_region.h = h;
+	if (dsi.te_enabled) {
+		/* enable LP_RX_TO again after the TE */
+		REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
 	}
 
-	dsi.update_region.device = dssdev;
-	dsi.update_region.dirty = true;
-
-	spin_unlock(&dsi.update_lock);
-
-}
-
-static int dsi_set_update_mode(struct omap_dss_device *dssdev,
-		enum omap_dss_update_mode mode)
-{
-	int r = 0;
-	int i;
-
-	WARN_ON(!mutex_is_locked(&dsi.bus_lock));
-
-	if (dsi.update_mode != mode) {
-		dsi.update_mode = mode;
-
-		/* Mark the overlays dirty, and do apply(), so that we get the
-		 * overlays configured properly after update mode change. */
-		for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
-			struct omap_overlay *ovl;
-			ovl = omap_dss_get_overlay(i);
-			if (ovl->manager == dssdev->manager)
-				ovl->info_dirty = true;
-		}
-
-		r = dssdev->manager->apply(dssdev->manager);
-
-		if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE &&
-				mode == OMAP_DSS_UPDATE_AUTO) {
-			u16 w, h;
-
-			DSSDBG("starting auto update\n");
-
-			dssdev->get_resolution(dssdev, &w, &h);
-
-			dsi_set_update_region(dssdev, 0, 0, w, h);
-
-			dsi_perf_mark_start_auto();
+	/* Send BTA after the frame. We need this for the TE to work, as TE
+	 * trigger is only sent for BTAs without preceding packet. Thus we need
+	 * to BTA after the pixel packets so that next BTA will cause TE
+	 * trigger.
+	 *
+	 * This is not needed when TE is not in use, but we do it anyway to
+	 * make sure that the transfer has been completed. It would be more
+	 * optimal, but more complex, to wait only just before starting next
+	 * transfer. */
+	r = dsi_vc_send_bta_sync(channel);
+	if (r)
+		DSSERR("BTA after framedone failed\n");
 
-			wake_up(&dsi.waitqueue);
-		}
+	/* RX_FIFO_NOT_EMPTY */
+	if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
+		DSSERR("Received error during frame transfer:\n");
+		dsi_vc_flush_receive_data(channel);
 	}
 
-	return r;
+	dsi.framedone_callback(-ETIMEDOUT, dsi.framedone_data);
 }
 
-static int dsi_set_te(struct omap_dss_device *dssdev, bool enable)
+static void dsi_framedone_irq_callback(void *data, u32 mask)
 {
-	int r = 0;
+	/* Note: We get FRAMEDONE when DISPC has finished sending pixels and
+	 * turns itself off. However, DSI still has the pixels in its buffers,
+	 * and is sending the data.
+	 */
 
-	if (dssdev->driver->enable_te) {
-		r = dssdev->driver->enable_te(dssdev, enable);
-		/* XXX for some reason, DSI TE breaks if we don't wait here.
-		 * Panel bug? Needs more studying */
-		msleep(100);
-	}
+	/* SIDLEMODE back to smart-idle */
+	dispc_enable_sidle();
 
-	return r;
+	schedule_work(&dsi.framedone_work);
 }
 
 static void dsi_handle_framedone(void)
 {
 	int r;
-	const int channel = 0;
-	bool use_te_trigger;
-
-	use_te_trigger = dsi.te_enabled && !dsi.use_ext_te;
+	const int channel = dsi.update_channel;
 
-	if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
-		DSSDBG("FRAMEDONE\n");
+	DSSDBG("FRAMEDONE\n");
 
-	if (use_te_trigger) {
+	if (dsi.te_enabled) {
 		/* enable LP_RX_TO again after the TE */
 		REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
 	}
@@ -2976,7 +2912,7 @@ static void dsi_handle_framedone(void)
 	/* RX_FIFO_NOT_EMPTY */
 	if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
 		DSSERR("Received error during frame transfer:\n");
-		dsi_vc_flush_receive_data(0);
+		dsi_vc_flush_receive_data(channel);
 	}
 
 #ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
@@ -2984,118 +2920,79 @@ static void dsi_handle_framedone(void)
 #endif
 }
 
-static int dsi_update_thread(void *data)
+static void dsi_framedone_work_callback(struct work_struct *work)
 {
-	unsigned long timeout;
-	struct omap_dss_device *device;
-	u16 x, y, w, h;
-
-	while (1) {
-		bool sched;
-
-		wait_event_interruptible(dsi.waitqueue,
-				dsi.update_mode == OMAP_DSS_UPDATE_AUTO ||
-				(dsi.update_mode == OMAP_DSS_UPDATE_MANUAL &&
-				 dsi.update_region.dirty == true) ||
-				kthread_should_stop());
-
-		if (kthread_should_stop())
-			break;
-
-		dsi_bus_lock();
-
-		if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED ||
-				kthread_should_stop()) {
-			dsi_bus_unlock();
-			break;
-		}
-
-		dsi_perf_mark_setup();
-
-		if (dsi.update_region.dirty) {
-			spin_lock(&dsi.update_lock);
-			dsi.active_update_region = dsi.update_region;
-			dsi.update_region.dirty = false;
-			spin_unlock(&dsi.update_lock);
-		}
+	DSSDBGF();
 
-		device = dsi.active_update_region.device;
-		x = dsi.active_update_region.x;
-		y = dsi.active_update_region.y;
-		w = dsi.active_update_region.w;
-		h = dsi.active_update_region.h;
+	cancel_delayed_work_sync(&dsi.framedone_timeout_work);
 
-		if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+	dsi_handle_framedone();
 
-			if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL)
-				dss_setup_partial_planes(device,
-						&x, &y, &w, &h);
+	dsi_perf_show("DISPC");
 
-			dispc_set_lcd_size(w, h);
-		}
+	dsi.framedone_callback(0, dsi.framedone_data);
+}
 
-		if (dsi.active_update_region.dirty) {
-			dsi.active_update_region.dirty = false;
-			/* XXX TODO we don't need to send the coords, if they
-			 * are the same that are already programmed to the
-			 * panel. That should speed up manual update a bit */
-			device->driver->setup_update(device, x, y, w, h);
-		}
+int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
+				    u16 *x, u16 *y, u16 *w, u16 *h)
+{
+	u16 dw, dh;
 
-		dsi_perf_mark_start();
+	dssdev->driver->get_resolution(dssdev, &dw, &dh);
 
-		if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
-			dsi_vc_config_vp(0);
+	if  (*x > dw || *y > dh)
+		return -EINVAL;
 
-			if (dsi.te_enabled && dsi.use_ext_te)
-				device->driver->wait_for_te(device);
+	if (*x + *w > dw)
+		return -EINVAL;
 
-			dsi.framedone_received = false;
+	if (*y + *h > dh)
+		return -EINVAL;
 
-			dsi_update_screen_dispc(device, x, y, w, h);
+	if (*w == 1)
+		return -EINVAL;
 
-			/* wait for framedone */
-			timeout = msecs_to_jiffies(1000);
-			wait_event_timeout(dsi.waitqueue,
-					dsi.framedone_received == true,
-					timeout);
+	if (*w == 0 || *h == 0)
+		return -EINVAL;
 
-			if (!dsi.framedone_received) {
-				DSSERR("framedone timeout\n");
-				DSSERR("failed update %d,%d %dx%d\n",
-						x, y, w, h);
+	dsi_perf_mark_setup();
 
-				dispc_enable_sidle();
-				dispc_enable_lcd_out(0);
+	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+		dss_setup_partial_planes(dssdev, x, y, w, h);
+		dispc_set_lcd_size(*w, *h);
+	}
 
-				dsi_reset_tx_fifo(0);
-			} else {
-				dsi_handle_framedone();
-				dsi_perf_show("DISPC");
-			}
-		} else {
-			dsi_update_screen_l4(device, x, y, w, h);
-			dsi_perf_show("L4");
-		}
+	return 0;
+}
+EXPORT_SYMBOL(omap_dsi_prepare_update);
 
-		sched = atomic_read(&dsi.bus_lock.count) < 0;
+int omap_dsi_update(struct omap_dss_device *dssdev,
+		int channel,
+		u16 x, u16 y, u16 w, u16 h,
+		void (*callback)(int, void *), void *data)
+{
+	dsi.update_channel = channel;
 
-		complete_all(&dsi.update_completion);
+	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+		dsi.framedone_callback = callback;
+		dsi.framedone_data = data;
 
-		dsi_bus_unlock();
+		dsi.update_region.x = x;
+		dsi.update_region.y = y;
+		dsi.update_region.w = w;
+		dsi.update_region.h = h;
+		dsi.update_region.device = dssdev;
 
-		/* XXX We need to give others chance to get the bus lock. Is
-		 * there a better way for this? */
-		if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO && sched)
-			schedule_timeout_interruptible(1);
+		dsi_update_screen_dispc(dssdev, x, y, w, h);
+	} else {
+		dsi_update_screen_l4(dssdev, x, y, w, h);
+		dsi_perf_show("L4");
+		callback(0, data);
 	}
 
-	DSSDBG("update thread exiting\n");
-
 	return 0;
 }
-
-
+EXPORT_SYMBOL(omap_dsi_update);
 
 /* Display funcs */
 
@@ -3203,7 +3100,8 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
 	if (r)
 		goto err1;
 
-	dss_select_clk_source(true, true);
+	dss_select_dispc_clk_source(DSS_SRC_DSI1_PLL_FCLK);
+	dss_select_dsi_clk_source(DSS_SRC_DSI2_PLL_FCLK);
 
 	DSSDBG("PLL OK\n");
 
@@ -3229,25 +3127,18 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
 
 	/* enable interface */
 	dsi_vc_enable(0, 1);
+	dsi_vc_enable(1, 1);
+	dsi_vc_enable(2, 1);
+	dsi_vc_enable(3, 1);
 	dsi_if_enable(1);
 	dsi_force_tx_stop_mode_io();
 
-	if (dssdev->driver->enable) {
-		r = dssdev->driver->enable(dssdev);
-		if (r)
-			goto err4;
-	}
-
-	/* enable high-speed after initial config */
-	dsi_vc_enable_hs(0, 1);
-
 	return 0;
-err4:
-	dsi_if_enable(0);
 err3:
 	dsi_complexio_uninit();
 err2:
-	dss_select_clk_source(false, false);
+	dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
+	dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
 err1:
 	dsi_pll_uninit();
 err0:
@@ -3256,10 +3147,8 @@ err0:
 
 static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev)
 {
-	if (dssdev->driver->disable)
-		dssdev->driver->disable(dssdev);
-
-	dss_select_clk_source(false, false);
+	dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
+	dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
 	dsi_complexio_uninit();
 	dsi_pll_uninit();
 }
@@ -3280,14 +3169,15 @@ static int dsi_core_init(void)
 	return 0;
 }
 
-static int dsi_display_enable(struct omap_dss_device *dssdev)
+int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
 {
 	int r = 0;
 
 	DSSDBG("dsi_display_enable\n");
 
+	WARN_ON(!dsi_bus_is_locked());
+
 	mutex_lock(&dsi.lock);
-	dsi_bus_lock();
 
 	r = omap_dss_start_device(dssdev);
 	if (r) {
@@ -3295,100 +3185,47 @@ static int dsi_display_enable(struct omap_dss_device *dssdev)
 		goto err0;
 	}
 
-	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
-		DSSERR("dssdev already enabled\n");
-		r = -EINVAL;
-		goto err1;
-	}
-
 	enable_clocks(1);
 	dsi_enable_pll_clock(1);
 
 	r = _dsi_reset();
 	if (r)
-		goto err2;
+		goto err1;
 
 	dsi_core_init();
 
 	r = dsi_display_init_dispc(dssdev);
 	if (r)
-		goto err2;
+		goto err1;
 
 	r = dsi_display_init_dsi(dssdev);
 	if (r)
-		goto err3;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	dsi.use_ext_te = dssdev->phy.dsi.ext_te;
-	r = dsi_set_te(dssdev, dsi.te_enabled);
-	if (r)
-		goto err4;
-
-	dsi_set_update_mode(dssdev, dsi.user_update_mode);
+		goto err2;
 
-	dsi_bus_unlock();
 	mutex_unlock(&dsi.lock);
 
 	return 0;
 
-err4:
-
-	dsi_display_uninit_dsi(dssdev);
-err3:
-	dsi_display_uninit_dispc(dssdev);
 err2:
+	dsi_display_uninit_dispc(dssdev);
+err1:
 	enable_clocks(0);
 	dsi_enable_pll_clock(0);
-err1:
 	omap_dss_stop_device(dssdev);
 err0:
-	dsi_bus_unlock();
 	mutex_unlock(&dsi.lock);
 	DSSDBG("dsi_display_enable FAILED\n");
 	return r;
 }
+EXPORT_SYMBOL(omapdss_dsi_display_enable);
 
-static void dsi_display_disable(struct omap_dss_device *dssdev)
+void omapdss_dsi_display_disable(struct omap_dss_device *dssdev)
 {
 	DSSDBG("dsi_display_disable\n");
 
-	mutex_lock(&dsi.lock);
-	dsi_bus_lock();
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED ||
-			dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
-		goto end;
-
-	dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
-	dsi_display_uninit_dispc(dssdev);
-
-	dsi_display_uninit_dsi(dssdev);
-
-	enable_clocks(0);
-	dsi_enable_pll_clock(0);
-
-	omap_dss_stop_device(dssdev);
-end:
-	dsi_bus_unlock();
-	mutex_unlock(&dsi.lock);
-}
-
-static int dsi_display_suspend(struct omap_dss_device *dssdev)
-{
-	DSSDBG("dsi_display_suspend\n");
+	WARN_ON(!dsi_bus_is_locked());
 
 	mutex_lock(&dsi.lock);
-	dsi_bus_lock();
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED ||
-			dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
-		goto end;
-
-	dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
-	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
 
 	dsi_display_uninit_dispc(dssdev);
 
@@ -3396,312 +3233,19 @@ static int dsi_display_suspend(struct omap_dss_device *dssdev)
 
 	enable_clocks(0);
 	dsi_enable_pll_clock(0);
-end:
-	dsi_bus_unlock();
-	mutex_unlock(&dsi.lock);
-
-	return 0;
-}
-
-static int dsi_display_resume(struct omap_dss_device *dssdev)
-{
-	int r;
-
-	DSSDBG("dsi_display_resume\n");
-
-	mutex_lock(&dsi.lock);
-	dsi_bus_lock();
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
-		DSSERR("dssdev not suspended\n");
-		r = -EINVAL;
-		goto err0;
-	}
-
-	enable_clocks(1);
-	dsi_enable_pll_clock(1);
-
-	r = _dsi_reset();
-	if (r)
-		goto err1;
-
-	dsi_core_init();
-
-	r = dsi_display_init_dispc(dssdev);
-	if (r)
-		goto err1;
-
-	r = dsi_display_init_dsi(dssdev);
-	if (r)
-		goto err2;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	r = dsi_set_te(dssdev, dsi.te_enabled);
-	if (r)
-		goto err2;
-
-	dsi_set_update_mode(dssdev, dsi.user_update_mode);
-
-	dsi_bus_unlock();
-	mutex_unlock(&dsi.lock);
-
-	return 0;
-
-err2:
-	dsi_display_uninit_dispc(dssdev);
-err1:
-	enable_clocks(0);
-	dsi_enable_pll_clock(0);
-err0:
-	dsi_bus_unlock();
-	mutex_unlock(&dsi.lock);
-	DSSDBG("dsi_display_resume FAILED\n");
-	return r;
-}
-
-static int dsi_display_update(struct omap_dss_device *dssdev,
-			u16 x, u16 y, u16 w, u16 h)
-{
-	int r = 0;
-	u16 dw, dh;
-
-	DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h);
 
-	mutex_lock(&dsi.lock);
-
-	if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL)
-		goto end;
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		goto end;
-
-	dssdev->get_resolution(dssdev, &dw, &dh);
-
-	if  (x > dw || y > dh)
-		goto end;
-
-	if (x + w > dw)
-		w = dw - x;
-
-	if (y + h > dh)
-		h = dh - y;
-
-	if (w == 0 || h == 0)
-		goto end;
-
-	if (w == 1) {
-		r = -EINVAL;
-		goto end;
-	}
-
-	dsi_set_update_region(dssdev, x, y, w, h);
-
-	wake_up(&dsi.waitqueue);
-
-end:
-	mutex_unlock(&dsi.lock);
-
-	return r;
-}
-
-static int dsi_display_sync(struct omap_dss_device *dssdev)
-{
-	bool wait;
-
-	DSSDBG("dsi_display_sync()\n");
-
-	mutex_lock(&dsi.lock);
-	dsi_bus_lock();
-
-	if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL &&
-			dsi.update_region.dirty) {
-		INIT_COMPLETION(dsi.update_completion);
-		wait = true;
-	} else {
-		wait = false;
-	}
-
-	dsi_bus_unlock();
-	mutex_unlock(&dsi.lock);
-
-	if (wait)
-		wait_for_completion_interruptible(&dsi.update_completion);
-
-	DSSDBG("dsi_display_sync() done\n");
-	return 0;
-}
-
-static int dsi_display_set_update_mode(struct omap_dss_device *dssdev,
-		enum omap_dss_update_mode mode)
-{
-	int r = 0;
-
-	DSSDBGF("%d", mode);
-
-	mutex_lock(&dsi.lock);
-	dsi_bus_lock();
-
-	dsi.user_update_mode = mode;
-	r = dsi_set_update_mode(dssdev, mode);
+	omap_dss_stop_device(dssdev);
 
-	dsi_bus_unlock();
 	mutex_unlock(&dsi.lock);
-
-	return r;
 }
+EXPORT_SYMBOL(omapdss_dsi_display_disable);
 
-static enum omap_dss_update_mode dsi_display_get_update_mode(
-		struct omap_dss_device *dssdev)
+int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
 {
-	return dsi.update_mode;
-}
-
-
-static int dsi_display_enable_te(struct omap_dss_device *dssdev, bool enable)
-{
-	int r = 0;
-
-	DSSDBGF("%d", enable);
-
-	if (!dssdev->driver->enable_te)
-		return -ENOENT;
-
-	dsi_bus_lock();
-
 	dsi.te_enabled = enable;
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		goto end;
-
-	r = dsi_set_te(dssdev, enable);
-end:
-	dsi_bus_unlock();
-
-	return r;
-}
-
-static int dsi_display_get_te(struct omap_dss_device *dssdev)
-{
-	return dsi.te_enabled;
-}
-
-static int dsi_display_set_rotate(struct omap_dss_device *dssdev, u8 rotate)
-{
-
-	DSSDBGF("%d", rotate);
-
-	if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate)
-		return -EINVAL;
-
-	dsi_bus_lock();
-	dssdev->driver->set_rotate(dssdev, rotate);
-	if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) {
-		u16 w, h;
-		/* the display dimensions may have changed, so set a new
-		 * update region */
-		dssdev->get_resolution(dssdev, &w, &h);
-		dsi_set_update_region(dssdev, 0, 0, w, h);
-	}
-	dsi_bus_unlock();
-
 	return 0;
 }
-
-static u8 dsi_display_get_rotate(struct omap_dss_device *dssdev)
-{
-	if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate)
-		return 0;
-
-	return dssdev->driver->get_rotate(dssdev);
-}
-
-static int dsi_display_set_mirror(struct omap_dss_device *dssdev, bool mirror)
-{
-	DSSDBGF("%d", mirror);
-
-	if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
-		return -EINVAL;
-
-	dsi_bus_lock();
-	dssdev->driver->set_mirror(dssdev, mirror);
-	dsi_bus_unlock();
-
-	return 0;
-}
-
-static bool dsi_display_get_mirror(struct omap_dss_device *dssdev)
-{
-	if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
-		return 0;
-
-	return dssdev->driver->get_mirror(dssdev);
-}
-
-static int dsi_display_run_test(struct omap_dss_device *dssdev, int test_num)
-{
-	int r;
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return -EIO;
-
-	DSSDBGF("%d", test_num);
-
-	dsi_bus_lock();
-
-	/* run test first in low speed mode */
-	dsi_vc_enable_hs(0, 0);
-
-	if (dssdev->driver->run_test) {
-		r = dssdev->driver->run_test(dssdev, test_num);
-		if (r)
-			goto end;
-	}
-
-	/* then in high speed */
-	dsi_vc_enable_hs(0, 1);
-
-	if (dssdev->driver->run_test) {
-		r = dssdev->driver->run_test(dssdev, test_num);
-		if (r)
-			goto end;
-	}
-
-end:
-	dsi_vc_enable_hs(0, 1);
-
-	dsi_bus_unlock();
-
-	return r;
-}
-
-static int dsi_display_memory_read(struct omap_dss_device *dssdev,
-		void *buf, size_t size,
-		u16 x, u16 y, u16 w, u16 h)
-{
-	int r;
-
-	DSSDBGF("");
-
-	if (!dssdev->driver->memory_read)
-		return -EINVAL;
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return -EIO;
-
-	dsi_bus_lock();
-
-	r = dssdev->driver->memory_read(dssdev, buf, size,
-			x, y, w, h);
-
-	/* Memory read usually changes the update area. This will
-	 * force the next update to re-set the update area */
-	dsi.active_update_region.dirty = true;
-
-	dsi_bus_unlock();
-
-	return r;
-}
+EXPORT_SYMBOL(omapdss_dsi_enable_te);
 
 void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
 		u32 fifo_size, enum omap_burst_size *burst_size,
@@ -3720,26 +3264,6 @@ int dsi_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("DSI init\n");
 
-	dssdev->enable = dsi_display_enable;
-	dssdev->disable = dsi_display_disable;
-	dssdev->suspend = dsi_display_suspend;
-	dssdev->resume = dsi_display_resume;
-	dssdev->update = dsi_display_update;
-	dssdev->sync = dsi_display_sync;
-	dssdev->set_update_mode = dsi_display_set_update_mode;
-	dssdev->get_update_mode = dsi_display_get_update_mode;
-	dssdev->enable_te = dsi_display_enable_te;
-	dssdev->get_te = dsi_display_get_te;
-
-	dssdev->get_rotate = dsi_display_get_rotate;
-	dssdev->set_rotate = dsi_display_set_rotate;
-
-	dssdev->get_mirror = dsi_display_get_mirror;
-	dssdev->set_mirror = dsi_display_set_mirror;
-
-	dssdev->run_test = dsi_display_run_test;
-	dssdev->memory_read = dsi_display_memory_read;
-
 	/* XXX these should be figured out dynamically */
 	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
 		OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
@@ -3754,9 +3278,6 @@ int dsi_init(struct platform_device *pdev)
 {
 	u32 rev;
 	int r;
-	struct sched_param param = {
-		.sched_priority = MAX_USER_RT_PRIO-1
-	};
 
 	spin_lock_init(&dsi.errors_lock);
 	dsi.errors = 0;
@@ -3767,31 +3288,19 @@ int dsi_init(struct platform_device *pdev)
 #endif
 
 	init_completion(&dsi.bta_completion);
-	init_completion(&dsi.update_completion);
-
-	dsi.thread = kthread_create(dsi_update_thread, NULL, "dsi");
-	if (IS_ERR(dsi.thread)) {
-		DSSERR("cannot create kthread\n");
-		r = PTR_ERR(dsi.thread);
-		goto err0;
-	}
-	sched_setscheduler(dsi.thread, SCHED_FIFO, &param);
-
-	init_waitqueue_head(&dsi.waitqueue);
-	spin_lock_init(&dsi.update_lock);
 
 	mutex_init(&dsi.lock);
-	mutex_init(&dsi.bus_lock);
+	sema_init(&dsi.bus_lock, 1);
+
+	INIT_WORK(&dsi.framedone_work, dsi_framedone_work_callback);
+	INIT_DELAYED_WORK_DEFERRABLE(&dsi.framedone_timeout_work,
+			dsi_framedone_timeout_work_callback);
 
 #ifdef DSI_CATCH_MISSING_TE
 	init_timer(&dsi.te_timer);
 	dsi.te_timer.function = dsi_te_timeout;
 	dsi.te_timer.data = 0;
 #endif
-
-	dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
-	dsi.user_update_mode = OMAP_DSS_UPDATE_DISABLED;
-
 	dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS);
 	if (!dsi.base) {
 		DSSERR("can't ioremap DSI\n");
@@ -3799,7 +3308,7 @@ int dsi_init(struct platform_device *pdev)
 		goto err1;
 	}
 
-	dsi.vdds_dsi_reg = regulator_get(&pdev->dev, "vdds_dsi");
+	dsi.vdds_dsi_reg = dss_get_vdds_dsi();
 	if (IS_ERR(dsi.vdds_dsi_reg)) {
 		iounmap(dsi.base);
 		DSSERR("can't get VDDS_DSI regulator\n");
@@ -3815,23 +3324,15 @@ int dsi_init(struct platform_device *pdev)
 
 	enable_clocks(0);
 
-	wake_up_process(dsi.thread);
-
 	return 0;
 err2:
 	iounmap(dsi.base);
 err1:
-	kthread_stop(dsi.thread);
-err0:
 	return r;
 }
 
 void dsi_exit(void)
 {
-	kthread_stop(dsi.thread);
-
-	regulator_put(dsi.vdds_dsi_reg);
-
 	iounmap(dsi.base);
 
 	DSSDBG("omap_dsi_exit\n");
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 0a26b7d84d41..8254a4232a53 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -68,6 +68,9 @@ static struct {
 	struct dss_clock_info cache_dss_cinfo;
 	struct dispc_clock_info cache_dispc_cinfo;
 
+	enum dss_clk_source dsi_clk_source;
+	enum dss_clk_source dispc_clk_source;
+
 	u32		ctx[DSS_SZ_REGS / sizeof(u32)];
 } dss;
 
@@ -247,23 +250,42 @@ void dss_dump_regs(struct seq_file *s)
 #undef DUMPREG
 }
 
-void dss_select_clk_source(bool dsi, bool dispc)
+void dss_select_dispc_clk_source(enum dss_clk_source clk_src)
+{
+	int b;
+
+	BUG_ON(clk_src != DSS_SRC_DSI1_PLL_FCLK &&
+			clk_src != DSS_SRC_DSS1_ALWON_FCLK);
+
+	b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1;
+
+	REG_FLD_MOD(DSS_CONTROL, b, 0, 0);	/* DISPC_CLK_SWITCH */
+
+	dss.dispc_clk_source = clk_src;
+}
+
+void dss_select_dsi_clk_source(enum dss_clk_source clk_src)
 {
-	u32 r;
-	r = dss_read_reg(DSS_CONTROL);
-	r = FLD_MOD(r, dsi, 1, 1);	/* DSI_CLK_SWITCH */
-	r = FLD_MOD(r, dispc, 0, 0);	/* DISPC_CLK_SWITCH */
-	dss_write_reg(DSS_CONTROL, r);
+	int b;
+
+	BUG_ON(clk_src != DSS_SRC_DSI2_PLL_FCLK &&
+			clk_src != DSS_SRC_DSS1_ALWON_FCLK);
+
+	b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1;
+
+	REG_FLD_MOD(DSS_CONTROL, b, 1, 1);	/* DSI_CLK_SWITCH */
+
+	dss.dsi_clk_source = clk_src;
 }
 
-int dss_get_dsi_clk_source(void)
+enum dss_clk_source dss_get_dispc_clk_source(void)
 {
-	return FLD_GET(dss_read_reg(DSS_CONTROL), 1, 1);
+	return dss.dispc_clk_source;
 }
 
-int dss_get_dispc_clk_source(void)
+enum dss_clk_source dss_get_dsi_clk_source(void)
 {
-	return FLD_GET(dss_read_reg(DSS_CONTROL), 0, 0);
+	return dss.dsi_clk_source;
 }
 
 /* calculate clock rates using dividers in cinfo */
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 2bcb1245d6c2..24326a5fd292 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -119,6 +119,12 @@ enum dss_clock {
 	DSS_CLK_96M	= 1 << 4,
 };
 
+enum dss_clk_source {
+	DSS_SRC_DSI1_PLL_FCLK,
+	DSS_SRC_DSI2_PLL_FCLK,
+	DSS_SRC_DSS1_ALWON_FCLK,
+};
+
 struct dss_clock_info {
 	/* rates that we get with dividers below */
 	unsigned long fck;
@@ -169,6 +175,9 @@ unsigned long dss_clk_get_rate(enum dss_clock clk);
 int dss_need_ctx_restore(void);
 void dss_dump_clocks(struct seq_file *s);
 struct bus_type *dss_get_bus(void);
+struct regulator *dss_get_vdds_dsi(void);
+struct regulator *dss_get_vdds_sdi(void);
+struct regulator *dss_get_vdda_dac(void);
 
 /* display */
 int dss_suspend_all_devices(void);
@@ -216,9 +225,11 @@ void dss_sdi_init(u8 datapairs);
 int dss_sdi_enable(void);
 void dss_sdi_disable(void);
 
-void dss_select_clk_source(bool dsi, bool dispc);
-int dss_get_dsi_clk_source(void);
-int dss_get_dispc_clk_source(void);
+void dss_select_dispc_clk_source(enum dss_clk_source clk_src);
+void dss_select_dsi_clk_source(enum dss_clk_source clk_src);
+enum dss_clk_source dss_get_dispc_clk_source(void);
+enum dss_clk_source dss_get_dsi_clk_source(void);
+
 void dss_set_venc_output(enum omap_dss_venc_type type);
 void dss_set_dac_pwrdn_bgz(bool enable);
 
@@ -261,7 +272,7 @@ void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
 		u32 *fifo_low, u32 *fifo_high);
 
 /* DPI */
-int dpi_init(void);
+int dpi_init(struct platform_device *pdev);
 void dpi_exit(void);
 int dpi_init_display(struct omap_dss_device *dssdev);
 
@@ -313,8 +324,8 @@ int dispc_setup_plane(enum omap_plane plane,
 
 bool dispc_go_busy(enum omap_channel channel);
 void dispc_go(enum omap_channel channel);
-void dispc_enable_lcd_out(bool enable);
-void dispc_enable_digit_out(bool enable);
+void dispc_enable_channel(enum omap_channel channel, bool enable);
+bool dispc_is_channel_enabled(enum omap_channel channel);
 int dispc_enable_plane(enum omap_plane plane, bool enable);
 void dispc_enable_replication(enum omap_plane plane, bool enable);
 
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 27d9c465c851..913142d4cab1 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -501,6 +501,19 @@ static int omap_dss_unset_device(struct omap_overlay_manager *mgr)
 	return 0;
 }
 
+static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
+{
+	unsigned long timeout = msecs_to_jiffies(500);
+	u32 irq;
+
+	if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC)
+		irq = DISPC_IRQ_EVSYNC_ODD;
+	else
+		irq = DISPC_IRQ_VSYNC;
+
+	return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
+}
+
 static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
 {
 	unsigned long timeout = msecs_to_jiffies(500);
@@ -509,17 +522,18 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
 	u32 irq;
 	int r;
 	int i;
+	struct omap_dss_device *dssdev = mgr->device;
 
-	if (!mgr->device)
+	if (!dssdev)
 		return 0;
 
-	if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC) {
+	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
 		irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
 		channel = OMAP_DSS_CHANNEL_DIGIT;
 	} else {
-		if (mgr->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
+		if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
 			enum omap_dss_update_mode mode;
-			mode = mgr->device->get_update_mode(mgr->device);
+			mode = dssdev->driver->get_update_mode(dssdev);
 			if (mode != OMAP_DSS_UPDATE_AUTO)
 				return 0;
 
@@ -592,7 +606,7 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
 	} else {
 		if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
 			enum omap_dss_update_mode mode;
-			mode = dssdev->get_update_mode(dssdev);
+			mode = dssdev->driver->get_update_mode(dssdev);
 			if (mode != OMAP_DSS_UPDATE_AUTO)
 				return 0;
 
@@ -1064,7 +1078,7 @@ void dss_start_update(struct omap_dss_device *dssdev)
 		mc->shadow_dirty = false;
 	}
 
-	dispc_enable_lcd_out(1);
+	dssdev->manager->enable(dssdev->manager);
 }
 
 static void dss_apply_irq_handler(void *data, u32 mask)
@@ -1196,7 +1210,8 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
 
 		oc->manual_update =
 			dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE &&
-			dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO;
+			dssdev->driver->get_update_mode(dssdev) !=
+				OMAP_DSS_UPDATE_AUTO;
 
 		++num_planes_enabled;
 	}
@@ -1237,7 +1252,8 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
 
 		mc->manual_update =
 			dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE &&
-			dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO;
+			dssdev->driver->get_update_mode(dssdev) !=
+				OMAP_DSS_UPDATE_AUTO;
 	}
 
 	/* XXX TODO: Try to get fifomerge working. The problem is that it
@@ -1351,6 +1367,18 @@ static void omap_dss_mgr_get_info(struct omap_overlay_manager *mgr,
 	*info = mgr->info;
 }
 
+static int dss_mgr_enable(struct omap_overlay_manager *mgr)
+{
+	dispc_enable_channel(mgr->id, 1);
+	return 0;
+}
+
+static int dss_mgr_disable(struct omap_overlay_manager *mgr)
+{
+	dispc_enable_channel(mgr->id, 0);
+	return 0;
+}
+
 static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager)
 {
 	++num_managers;
@@ -1394,6 +1422,10 @@ int dss_init_overlay_managers(struct platform_device *pdev)
 		mgr->set_manager_info = &omap_dss_mgr_set_info;
 		mgr->get_manager_info = &omap_dss_mgr_get_info;
 		mgr->wait_for_go = &dss_mgr_wait_for_go;
+		mgr->wait_for_vsync = &dss_mgr_wait_for_vsync;
+
+		mgr->enable = &dss_mgr_enable;
+		mgr->disable = &dss_mgr_disable;
 
 		mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC;
 
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index b7f9a7339842..0c5bea263ac6 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -350,7 +350,7 @@ int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev)
 		return -EINVAL;
 	}
 
-	dssdev->get_resolution(dssdev, &dw, &dh);
+	dssdev->driver->get_resolution(dssdev, &dw, &dh);
 
 	DSSDBG("check_overlay %d: (%d,%d %dx%d -> %dx%d) disp (%dx%d)\n",
 			ovl->id,
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index b936495c065d..cc23f53cc62d 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -36,8 +36,6 @@
 #include <plat/display.h>
 #include "dss.h"
 
-/*#define MEASURE_PERF*/
-
 #define RFBI_BASE               0x48050800
 
 struct rfbi_reg { u16 idx; };
@@ -66,8 +64,6 @@ struct rfbi_reg { u16 idx; };
 #define RFBI_VSYNC_WIDTH	RFBI_REG(0x0090)
 #define RFBI_HSYNC_WIDTH	RFBI_REG(0x0094)
 
-#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param))
-
 #define REG_FLD_MOD(idx, val, start, end) \
 	rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end))
 
@@ -102,7 +98,6 @@ enum update_cmd {
 
 static int rfbi_convert_timings(struct rfbi_timings *t);
 static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div);
-static void process_cmd_fifo(void);
 
 static struct {
 	void __iomem	*base;
@@ -125,11 +120,6 @@ static struct {
 	struct completion cmd_done;
 	atomic_t          cmd_fifo_full;
 	atomic_t          cmd_pending;
-#ifdef MEASURE_PERF
-	unsigned perf_bytes;
-	ktime_t perf_setup_time;
-	ktime_t perf_start_time;
-#endif
 } rfbi;
 
 struct update_region {
@@ -139,16 +129,6 @@ struct update_region {
 	u16     h;
 };
 
-struct update_param {
-	u8 rfbi_module;
-	u8 cmd;
-
-	union {
-		struct update_region r;
-		struct completion *sync;
-	} par;
-};
-
 static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
 {
 	__raw_writel(val, rfbi.base + idx.idx);
@@ -321,55 +301,6 @@ void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
 }
 EXPORT_SYMBOL(omap_rfbi_write_pixels);
 
-#ifdef MEASURE_PERF
-static void perf_mark_setup(void)
-{
-	rfbi.perf_setup_time = ktime_get();
-}
-
-static void perf_mark_start(void)
-{
-	rfbi.perf_start_time = ktime_get();
-}
-
-static void perf_show(const char *name)
-{
-	ktime_t t, setup_time, trans_time;
-	u32 total_bytes;
-	u32 setup_us, trans_us, total_us;
-
-	t = ktime_get();
-
-	setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time);
-	setup_us = (u32)ktime_to_us(setup_time);
-	if (setup_us == 0)
-		setup_us = 1;
-
-	trans_time = ktime_sub(t, rfbi.perf_start_time);
-	trans_us = (u32)ktime_to_us(trans_time);
-	if (trans_us == 0)
-		trans_us = 1;
-
-	total_us = setup_us + trans_us;
-
-	total_bytes = rfbi.perf_bytes;
-
-	DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, "
-			"%u kbytes/sec\n",
-			name,
-			setup_us,
-			trans_us,
-			total_us,
-			1000*1000 / total_us,
-			total_bytes,
-			total_bytes * 1000 / total_us);
-}
-#else
-#define perf_mark_setup()
-#define perf_mark_start()
-#define perf_show(x)
-#endif
-
 void rfbi_transfer_area(u16 width, u16 height,
 			     void (callback)(void *data), void *data)
 {
@@ -382,7 +313,7 @@ void rfbi_transfer_area(u16 width, u16 height,
 
 	dispc_set_lcd_size(width, height);
 
-	dispc_enable_lcd_out(1);
+	dispc_enable_channel(OMAP_DSS_CHANNEL_LCD, true);
 
 	rfbi.framedone_callback = callback;
 	rfbi.framedone_callback_data = data;
@@ -396,8 +327,6 @@ void rfbi_transfer_area(u16 width, u16 height,
 	if (!rfbi.te_enabled)
 		l = FLD_MOD(l, 1, 4, 4); /* ITE */
 
-	perf_mark_start();
-
 	rfbi_write_reg(RFBI_CONTROL, l);
 }
 
@@ -407,8 +336,6 @@ static void framedone_callback(void *data, u32 mask)
 
 	DSSDBG("FRAMEDONE\n");
 
-	perf_show("DISPC");
-
 	REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0);
 
 	rfbi_enable_clocks(0);
@@ -416,11 +343,10 @@ static void framedone_callback(void *data, u32 mask)
 	callback = rfbi.framedone_callback;
 	rfbi.framedone_callback = NULL;
 
-	/*callback(rfbi.framedone_callback_data);*/
+	if (callback != NULL)
+		callback(rfbi.framedone_callback_data);
 
 	atomic_set(&rfbi.cmd_pending, 0);
-
-	process_cmd_fifo();
 }
 
 #if 1 /* VERBOSE */
@@ -937,52 +863,43 @@ int rfbi_configure(int rfbi_module, int bpp, int lines)
 }
 EXPORT_SYMBOL(rfbi_configure);
 
-static int rfbi_find_display(struct omap_dss_device *dssdev)
+int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
+		u16 *x, u16 *y, u16 *w, u16 *h)
 {
-	if (dssdev == rfbi.dssdev[0])
-		return 0;
+	u16 dw, dh;
 
-	if (dssdev == rfbi.dssdev[1])
-		return 1;
+	dssdev->driver->get_resolution(dssdev, &dw, &dh);
 
-	BUG();
-	return -1;
-}
+	if  (*x > dw || *y > dh)
+		return -EINVAL;
 
+	if (*x + *w > dw)
+		return -EINVAL;
 
-static void signal_fifo_waiters(void)
-{
-	if (atomic_read(&rfbi.cmd_fifo_full) > 0) {
-		/* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */
-		complete(&rfbi.cmd_done);
-		atomic_dec(&rfbi.cmd_fifo_full);
-	}
-}
+	if (*y + *h > dh)
+		return -EINVAL;
 
-/* returns 1 for async op, and 0 for sync op */
-static int do_update(struct omap_dss_device *dssdev, struct update_region *upd)
-{
-	u16 x = upd->x;
-	u16 y = upd->y;
-	u16 w = upd->w;
-	u16 h = upd->h;
+	if (*w == 1)
+		return -EINVAL;
 
-	perf_mark_setup();
+	if (*w == 0 || *h == 0)
+		return -EINVAL;
 
 	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
-		/*dssdev->driver->enable_te(dssdev, 1); */
-		dss_setup_partial_planes(dssdev, &x, &y, &w, &h);
+		dss_setup_partial_planes(dssdev, x, y, w, h);
+		dispc_set_lcd_size(*w, *h);
 	}
 
-#ifdef MEASURE_PERF
-	rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */
-#endif
-
-	dssdev->driver->setup_update(dssdev, x, y, w, h);
+	return 0;
+}
+EXPORT_SYMBOL(omap_rfbi_prepare_update);
 
+int omap_rfbi_update(struct omap_dss_device *dssdev,
+		u16 x, u16 y, u16 w, u16 h,
+		void (*callback)(void *), void *data)
+{
 	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
-		rfbi_transfer_area(w, h, NULL, NULL);
-		return 1;
+		rfbi_transfer_area(w, h, callback, data);
 	} else {
 		struct omap_overlay *ovl;
 		void __iomem *addr;
@@ -994,123 +911,12 @@ static int do_update(struct omap_dss_device *dssdev, struct update_region *upd)
 
 		omap_rfbi_write_pixels(addr, scr_width, x, y, w, h);
 
-		perf_show("L4");
-
-		return 0;
+		callback(data);
 	}
-}
-
-static void process_cmd_fifo(void)
-{
-	int len;
-	struct update_param p;
-	struct omap_dss_device *dssdev;
-	unsigned long flags;
-
-	if (atomic_inc_return(&rfbi.cmd_pending) != 1)
-		return;
-
-	while (true) {
-		spin_lock_irqsave(&rfbi.cmd_lock, flags);
-
-		len = kfifo_out(&rfbi.cmd_fifo, (unsigned char *)&p,
-				  sizeof(struct update_param));
-		if (len == 0) {
-			DSSDBG("nothing more in fifo\n");
-			atomic_set(&rfbi.cmd_pending, 0);
-			spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
-			break;
-		}
-
-		/* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/
-
-		spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
-
-		BUG_ON(len != sizeof(struct update_param));
-		BUG_ON(p.rfbi_module > 1);
-
-		dssdev = rfbi.dssdev[p.rfbi_module];
-
-		if (p.cmd == RFBI_CMD_UPDATE) {
-			if (do_update(dssdev, &p.par.r))
-				break; /* async op */
-		} else if (p.cmd == RFBI_CMD_SYNC) {
-			DSSDBG("Signaling SYNC done!\n");
-			complete(p.par.sync);
-		} else
-			BUG();
-	}
-
-	signal_fifo_waiters();
-}
 
-static void rfbi_push_cmd(struct update_param *p)
-{
-	int ret;
-
-	while (1) {
-		unsigned long flags;
-		int available;
-
-		spin_lock_irqsave(&rfbi.cmd_lock, flags);
-		available = RFBI_CMD_FIFO_LEN_BYTES -
-			kfifo_len(&rfbi.cmd_fifo);
-
-/*		DSSDBG("%d bytes left in fifo\n", available); */
-		if (available < sizeof(struct update_param)) {
-			DSSDBG("Going to wait because FIFO FULL..\n");
-			spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
-			atomic_inc(&rfbi.cmd_fifo_full);
-			wait_for_completion(&rfbi.cmd_done);
-			/*DSSDBG("Woke up because fifo not full anymore\n");*/
-			continue;
-		}
-
-		ret = kfifo_in(&rfbi.cmd_fifo, (unsigned char *)p,
-				  sizeof(struct update_param));
-/*		DSSDBG("pushed %d bytes\n", ret);*/
-
-		spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
-
-		BUG_ON(ret != sizeof(struct update_param));
-
-		break;
-	}
-}
-
-static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h)
-{
-	struct update_param p;
-
-	p.rfbi_module = rfbi_module;
-	p.cmd = RFBI_CMD_UPDATE;
-
-	p.par.r.x = x;
-	p.par.r.y = y;
-	p.par.r.w = w;
-	p.par.r.h = h;
-
-	DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h);
-
-	rfbi_push_cmd(&p);
-
-	process_cmd_fifo();
-}
-
-static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp)
-{
-	struct update_param p;
-
-	p.rfbi_module = rfbi_module;
-	p.cmd = RFBI_CMD_SYNC;
-	p.par.sync = sync_comp;
-
-	rfbi_push_cmd(&p);
-
-	DSSDBG("RFBI sync pushed to cmd fifo\n");
-
-	process_cmd_fifo();
+	return 0;
 }
+EXPORT_SYMBOL(omap_rfbi_update);
 
 void rfbi_dump_regs(struct seq_file *s)
 {
@@ -1155,12 +961,8 @@ int rfbi_init(void)
 {
 	u32 rev;
 	u32 l;
-	int r;
 
 	spin_lock_init(&rfbi.cmd_lock);
-	r = kfifo_alloc(&rfbi.cmd_fifo, RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL);
-	if (r)
-		return r;
 
 	init_completion(&rfbi.cmd_done);
 	atomic_set(&rfbi.cmd_fifo_full, 0);
@@ -1196,49 +998,10 @@ void rfbi_exit(void)
 {
 	DSSDBG("rfbi_exit\n");
 
-	kfifo_free(&rfbi.cmd_fifo);
-
 	iounmap(rfbi.base);
 }
 
-/* struct omap_display support */
-static int rfbi_display_update(struct omap_dss_device *dssdev,
-			u16 x, u16 y, u16 w, u16 h)
-{
-	int rfbi_module;
-
-	if (w == 0 || h == 0)
-		return 0;
-
-	rfbi_module = rfbi_find_display(dssdev);
-
-	rfbi_push_update(rfbi_module, x, y, w, h);
-
-	return 0;
-}
-
-static int rfbi_display_sync(struct omap_dss_device *dssdev)
-{
-	struct completion sync_comp;
-	int rfbi_module;
-
-	rfbi_module = rfbi_find_display(dssdev);
-
-	init_completion(&sync_comp);
-	rfbi_push_sync(rfbi_module, &sync_comp);
-	DSSDBG("Waiting for SYNC to happen...\n");
-	wait_for_completion(&sync_comp);
-	DSSDBG("Released from SYNC\n");
-	return 0;
-}
-
-static int rfbi_display_enable_te(struct omap_dss_device *dssdev, bool enable)
-{
-	dssdev->driver->enable_te(dssdev, enable);
-	return 0;
-}
-
-static int rfbi_display_enable(struct omap_dss_device *dssdev)
+int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
 {
 	int r;
 
@@ -1269,41 +1032,25 @@ static int rfbi_display_enable(struct omap_dss_device *dssdev)
 			 &dssdev->ctrl.rfbi_timings);
 
 
-	if (dssdev->driver->enable) {
-		r = dssdev->driver->enable(dssdev);
-		if (r)
-			goto err2;
-	}
-
 	return 0;
-err2:
-	omap_dispc_unregister_isr(framedone_callback, NULL,
-			DISPC_IRQ_FRAMEDONE);
 err1:
 	omap_dss_stop_device(dssdev);
 err0:
 	return r;
 }
+EXPORT_SYMBOL(omapdss_rfbi_display_enable);
 
-static void rfbi_display_disable(struct omap_dss_device *dssdev)
+void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev)
 {
-	dssdev->driver->disable(dssdev);
 	omap_dispc_unregister_isr(framedone_callback, NULL,
 			DISPC_IRQ_FRAMEDONE);
 	omap_dss_stop_device(dssdev);
 }
+EXPORT_SYMBOL(omapdss_rfbi_display_disable);
 
 int rfbi_init_display(struct omap_dss_device *dssdev)
 {
-	dssdev->enable = rfbi_display_enable;
-	dssdev->disable = rfbi_display_disable;
-	dssdev->update = rfbi_display_update;
-	dssdev->sync = rfbi_display_sync;
-	dssdev->enable_te = rfbi_display_enable_te;
-
 	rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev;
-
 	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
-
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index c24f307d3da1..12eb4042dd82 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -41,7 +41,7 @@ static void sdi_basic_init(void)
 	dispc_lcd_enable_signal_polarity(1);
 }
 
-static int sdi_display_enable(struct omap_dss_device *dssdev)
+int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 {
 	struct omap_video_timings *t = &dssdev->panel.timings;
 	struct dss_clock_info dss_cinfo;
@@ -57,12 +57,6 @@ static int sdi_display_enable(struct omap_dss_device *dssdev)
 		goto err0;
 	}
 
-	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
-		DSSERR("dssdev already enabled\n");
-		r = -EINVAL;
-		goto err1;
-	}
-
 	/* In case of skip_init sdi_init has already enabled the clocks */
 	if (!sdi.skip_init)
 		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
@@ -119,7 +113,7 @@ static int sdi_display_enable(struct omap_dss_device *dssdev)
 		mdelay(2);
 	}
 
-	dispc_enable_lcd_out(1);
+	dssdev->manager->enable(dssdev->manager);
 
 	if (dssdev->driver->enable) {
 		r = dssdev->driver->enable(dssdev);
@@ -127,13 +121,11 @@ static int sdi_display_enable(struct omap_dss_device *dssdev)
 			goto err3;
 	}
 
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
 	sdi.skip_init = 0;
 
 	return 0;
 err3:
-	dispc_enable_lcd_out(0);
+	dssdev->manager->disable(dssdev->manager);
 err2:
 	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
 err1:
@@ -141,120 +133,27 @@ err1:
 err0:
 	return r;
 }
+EXPORT_SYMBOL(omapdss_sdi_display_enable);
 
-static int sdi_display_resume(struct omap_dss_device *dssdev);
-
-static void sdi_display_disable(struct omap_dss_device *dssdev)
+void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
 {
-	if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
-		return;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
-		if (sdi_display_resume(dssdev))
-			return;
-
 	if (dssdev->driver->disable)
 		dssdev->driver->disable(dssdev);
 
-	dispc_enable_lcd_out(0);
+	dssdev->manager->disable(dssdev->manager);
 
 	dss_sdi_disable();
 
 	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
 
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
 	omap_dss_stop_device(dssdev);
 }
-
-static int sdi_display_suspend(struct omap_dss_device *dssdev)
-{
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return -EINVAL;
-
-	if (dssdev->driver->suspend)
-		dssdev->driver->suspend(dssdev);
-
-	dispc_enable_lcd_out(0);
-
-	dss_sdi_disable();
-
-	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
-
-	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
-
-	return 0;
-}
-
-static int sdi_display_resume(struct omap_dss_device *dssdev)
-{
-	int r;
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED)
-		return -EINVAL;
-
-	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
-
-	r = dss_sdi_enable();
-	if (r)
-		goto err;
-	mdelay(2);
-
-	dispc_enable_lcd_out(1);
-
-	if (dssdev->driver->resume)
-		dssdev->driver->resume(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-err:
-	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
-	return r;
-}
-
-static int sdi_display_set_update_mode(struct omap_dss_device *dssdev,
-		enum omap_dss_update_mode mode)
-{
-	if (mode == OMAP_DSS_UPDATE_MANUAL)
-		return -EINVAL;
-
-	if (mode == OMAP_DSS_UPDATE_DISABLED) {
-		dispc_enable_lcd_out(0);
-		sdi.update_enabled = 0;
-	} else {
-		dispc_enable_lcd_out(1);
-		sdi.update_enabled = 1;
-	}
-
-	return 0;
-}
-
-static enum omap_dss_update_mode sdi_display_get_update_mode(
-		struct omap_dss_device *dssdev)
-{
-	return sdi.update_enabled ? OMAP_DSS_UPDATE_AUTO :
-		OMAP_DSS_UPDATE_DISABLED;
-}
-
-static void sdi_get_timings(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings)
-{
-	*timings = dssdev->panel.timings;
-}
+EXPORT_SYMBOL(omapdss_sdi_display_disable);
 
 int sdi_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("SDI init\n");
 
-	dssdev->enable = sdi_display_enable;
-	dssdev->disable = sdi_display_disable;
-	dssdev->suspend = sdi_display_suspend;
-	dssdev->resume = sdi_display_resume;
-	dssdev->set_update_mode = sdi_display_set_update_mode;
-	dssdev->get_update_mode = sdi_display_get_update_mode;
-	dssdev->get_timings = sdi_get_timings;
-
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 749a5a0f5be4..f0ba5732d84a 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -400,114 +400,6 @@ static const struct venc_config *venc_timings_to_config(
 	BUG();
 }
 
-
-
-
-
-/* driver */
-static int venc_panel_probe(struct omap_dss_device *dssdev)
-{
-	dssdev->panel.timings = omap_dss_pal_timings;
-
-	return 0;
-}
-
-static void venc_panel_remove(struct omap_dss_device *dssdev)
-{
-}
-
-static int venc_panel_enable(struct omap_dss_device *dssdev)
-{
-	int r = 0;
-
-	/* wait couple of vsyncs until enabling the LCD */
-	msleep(50);
-
-	if (dssdev->platform_enable)
-		r = dssdev->platform_enable(dssdev);
-
-	return r;
-}
-
-static void venc_panel_disable(struct omap_dss_device *dssdev)
-{
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
-	/* wait at least 5 vsyncs after disabling the LCD */
-
-	msleep(100);
-}
-
-static int venc_panel_suspend(struct omap_dss_device *dssdev)
-{
-	venc_panel_disable(dssdev);
-	return 0;
-}
-
-static int venc_panel_resume(struct omap_dss_device *dssdev)
-{
-	return venc_panel_enable(dssdev);
-}
-
-static struct omap_dss_driver venc_driver = {
-	.probe		= venc_panel_probe,
-	.remove		= venc_panel_remove,
-
-	.enable		= venc_panel_enable,
-	.disable	= venc_panel_disable,
-	.suspend	= venc_panel_suspend,
-	.resume		= venc_panel_resume,
-
-	.driver         = {
-		.name   = "venc",
-		.owner  = THIS_MODULE,
-	},
-};
-/* driver end */
-
-
-
-int venc_init(struct platform_device *pdev)
-{
-	u8 rev_id;
-
-	mutex_init(&venc.venc_lock);
-
-	venc.wss_data = 0;
-
-	venc.base = ioremap(VENC_BASE, SZ_1K);
-	if (!venc.base) {
-		DSSERR("can't ioremap VENC\n");
-		return -ENOMEM;
-	}
-
-	venc.vdda_dac_reg = regulator_get(&pdev->dev, "vdda_dac");
-	if (IS_ERR(venc.vdda_dac_reg)) {
-		iounmap(venc.base);
-		DSSERR("can't get VDDA_DAC regulator\n");
-		return PTR_ERR(venc.vdda_dac_reg);
-	}
-
-	venc_enable_clocks(1);
-
-	rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff);
-	printk(KERN_INFO "OMAP VENC rev %d\n", rev_id);
-
-	venc_enable_clocks(0);
-
-	return omap_dss_register_driver(&venc_driver);
-}
-
-void venc_exit(void)
-{
-	omap_dss_unregister_driver(&venc_driver);
-
-	regulator_put(venc.vdda_dac_reg);
-
-	iounmap(venc.base);
-}
-
 static void venc_power_on(struct omap_dss_device *dssdev)
 {
 	u32 l;
@@ -540,7 +432,7 @@ static void venc_power_on(struct omap_dss_device *dssdev)
 	if (dssdev->platform_enable)
 		dssdev->platform_enable(dssdev);
 
-	dispc_enable_digit_out(1);
+	dssdev->manager->enable(dssdev->manager);
 }
 
 static void venc_power_off(struct omap_dss_device *dssdev)
@@ -548,7 +440,7 @@ static void venc_power_off(struct omap_dss_device *dssdev)
 	venc_write_reg(VENC_OUTPUT_CONTROL, 0);
 	dss_set_dac_pwrdn_bgz(0);
 
-	dispc_enable_digit_out(0);
+	dssdev->manager->disable(dssdev->manager);
 
 	if (dssdev->platform_disable)
 		dssdev->platform_disable(dssdev);
@@ -558,7 +450,23 @@ static void venc_power_off(struct omap_dss_device *dssdev)
 	venc_enable_clocks(0);
 }
 
-static int venc_enable_display(struct omap_dss_device *dssdev)
+
+
+
+
+/* driver */
+static int venc_panel_probe(struct omap_dss_device *dssdev)
+{
+	dssdev->panel.timings = omap_dss_pal_timings;
+
+	return 0;
+}
+
+static void venc_panel_remove(struct omap_dss_device *dssdev)
+{
+}
+
+static int venc_panel_enable(struct omap_dss_device *dssdev)
 {
 	int r = 0;
 
@@ -568,7 +476,13 @@ static int venc_enable_display(struct omap_dss_device *dssdev)
 
 	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
 		r = -EINVAL;
-		goto err;
+		goto err1;
+	}
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			goto err2;
 	}
 
 	venc_power_on(dssdev);
@@ -576,13 +490,21 @@ static int venc_enable_display(struct omap_dss_device *dssdev)
 	venc.wss_data = 0;
 
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-err:
+
+	/* wait couple of vsyncs until enabling the LCD */
+	msleep(50);
+
 	mutex_unlock(&venc.venc_lock);
 
 	return r;
+err2:
+	venc_power_off(dssdev);
+err1:
+	mutex_unlock(&venc.venc_lock);
+	return r;
 }
 
-static void venc_disable_display(struct omap_dss_device *dssdev)
+static void venc_panel_disable(struct omap_dss_device *dssdev)
 {
 	DSSDBG("venc_disable_display\n");
 
@@ -599,53 +521,40 @@ static void venc_disable_display(struct omap_dss_device *dssdev)
 
 	venc_power_off(dssdev);
 
+	/* wait at least 5 vsyncs after disabling the LCD */
+	msleep(100);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 end:
 	mutex_unlock(&venc.venc_lock);
 }
 
-static int venc_display_suspend(struct omap_dss_device *dssdev)
+static int venc_panel_suspend(struct omap_dss_device *dssdev)
 {
-	int r = 0;
-
-	DSSDBG("venc_display_suspend\n");
-
-	mutex_lock(&venc.venc_lock);
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
-		r = -EINVAL;
-		goto err;
-	}
-
-	venc_power_off(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
-err:
-	mutex_unlock(&venc.venc_lock);
-
-	return r;
+	venc_panel_disable(dssdev);
+	return 0;
 }
 
-static int venc_display_resume(struct omap_dss_device *dssdev)
+static int venc_panel_resume(struct omap_dss_device *dssdev)
 {
-	int r = 0;
-
-	DSSDBG("venc_display_resume\n");
-
-	mutex_lock(&venc.venc_lock);
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
-		r = -EINVAL;
-		goto err;
-	}
-
-	venc_power_on(dssdev);
+	return venc_panel_enable(dssdev);
+}
 
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-err:
-	mutex_unlock(&venc.venc_lock);
+static enum omap_dss_update_mode venc_get_update_mode(
+		struct omap_dss_device *dssdev)
+{
+	return OMAP_DSS_UPDATE_AUTO;
+}
 
-	return r;
+static int venc_set_update_mode(struct omap_dss_device *dssdev,
+		enum omap_dss_update_mode mode)
+{
+	if (mode != OMAP_DSS_UPDATE_AUTO)
+		return -EINVAL;
+	return 0;
 }
 
 static void venc_get_timings(struct omap_dss_device *dssdev,
@@ -666,8 +575,8 @@ static void venc_set_timings(struct omap_dss_device *dssdev,
 	dssdev->panel.timings = *timings;
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
 		/* turn the venc off and on to get new timings to use */
-		venc_disable_display(dssdev);
-		venc_enable_display(dssdev);
+		venc_panel_disable(dssdev);
+		venc_panel_enable(dssdev);
 	}
 }
 
@@ -716,30 +625,79 @@ static int venc_set_wss(struct omap_dss_device *dssdev,	u32 wss)
 	return 0;
 }
 
-static enum omap_dss_update_mode venc_display_get_update_mode(
-		struct omap_dss_device *dssdev)
+static struct omap_dss_driver venc_driver = {
+	.probe		= venc_panel_probe,
+	.remove		= venc_panel_remove,
+
+	.enable		= venc_panel_enable,
+	.disable	= venc_panel_disable,
+	.suspend	= venc_panel_suspend,
+	.resume		= venc_panel_resume,
+
+	.get_resolution	= omapdss_default_get_resolution,
+	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
+
+	.set_update_mode = venc_set_update_mode,
+	.get_update_mode = venc_get_update_mode,
+
+	.get_timings	= venc_get_timings,
+	.set_timings	= venc_set_timings,
+	.check_timings	= venc_check_timings,
+
+	.get_wss	= venc_get_wss,
+	.set_wss	= venc_set_wss,
+
+	.driver         = {
+		.name   = "venc",
+		.owner  = THIS_MODULE,
+	},
+};
+/* driver end */
+
+
+
+int venc_init(struct platform_device *pdev)
 {
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return OMAP_DSS_UPDATE_AUTO;
-	else
-		return OMAP_DSS_UPDATE_DISABLED;
+	u8 rev_id;
+
+	mutex_init(&venc.venc_lock);
+
+	venc.wss_data = 0;
+
+	venc.base = ioremap(VENC_BASE, SZ_1K);
+	if (!venc.base) {
+		DSSERR("can't ioremap VENC\n");
+		return -ENOMEM;
+	}
+
+	venc.vdda_dac_reg = dss_get_vdda_dac();
+	if (IS_ERR(venc.vdda_dac_reg)) {
+		iounmap(venc.base);
+		DSSERR("can't get VDDA_DAC regulator\n");
+		return PTR_ERR(venc.vdda_dac_reg);
+	}
+
+	venc_enable_clocks(1);
+
+	rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff);
+	printk(KERN_INFO "OMAP VENC rev %d\n", rev_id);
+
+	venc_enable_clocks(0);
+
+	return omap_dss_register_driver(&venc_driver);
+}
+
+void venc_exit(void)
+{
+	omap_dss_unregister_driver(&venc_driver);
+
+	iounmap(venc.base);
 }
 
 int venc_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("init_display\n");
 
-	dssdev->enable = venc_enable_display;
-	dssdev->disable = venc_disable_display;
-	dssdev->suspend = venc_display_suspend;
-	dssdev->resume = venc_display_resume;
-	dssdev->get_timings = venc_get_timings;
-	dssdev->set_timings = venc_set_timings;
-	dssdev->check_timings = venc_check_timings;
-	dssdev->get_wss = venc_get_wss;
-	dssdev->set_wss = venc_set_wss;
-	dssdev->get_update_mode = venc_display_get_update_mode;
-
 	return 0;
 }
 
diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig
index bb694cc52a50..43496d6c377f 100644
--- a/drivers/video/omap2/omapfb/Kconfig
+++ b/drivers/video/omap2/omapfb/Kconfig
@@ -16,16 +16,7 @@ config FB_OMAP2_DEBUG_SUPPORT
 	depends on FB_OMAP2
 	help
 	  Support for debug output. You have to enable the actual printing
-	  with debug module parameter.
-
-config FB_OMAP2_FORCE_AUTO_UPDATE
-	bool "Force main display to automatic update mode"
-	depends on FB_OMAP2
-	help
-	  Forces main display to automatic update mode (if possible),
-	  and also enables tearsync (if possible). By default
-	  displays that support manual update are started in manual
-	  update mode.
+	  with 'debug' module parameter.
 
 config FB_OMAP2_NUM_FBS
 	int "Number of framebuffers"
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 4c4bafdfaa43..1ffa760b8545 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -167,12 +167,12 @@ static int omapfb_update_window_nolock(struct fb_info *fbi,
 	if (w == 0 || h == 0)
 		return 0;
 
-	display->get_resolution(display, &dw, &dh);
+	display->driver->get_resolution(display, &dw, &dh);
 
 	if (x + w > dw || y + h > dh)
 		return -EINVAL;
 
-	return display->update(display, x, y, w, h);
+	return display->driver->update(display, x, y, w, h);
 }
 
 /* This function is exported for SGX driver use */
@@ -202,7 +202,7 @@ static int omapfb_set_update_mode(struct fb_info *fbi,
 	enum omap_dss_update_mode um;
 	int r;
 
-	if (!display || !display->set_update_mode)
+	if (!display || !display->driver->set_update_mode)
 		return -EINVAL;
 
 	switch (mode) {
@@ -222,7 +222,7 @@ static int omapfb_set_update_mode(struct fb_info *fbi,
 		return -EINVAL;
 	}
 
-	r = display->set_update_mode(display, um);
+	r = display->driver->set_update_mode(display, um);
 
 	return r;
 }
@@ -233,10 +233,15 @@ static int omapfb_get_update_mode(struct fb_info *fbi,
 	struct omap_dss_device *display = fb2display(fbi);
 	enum omap_dss_update_mode m;
 
-	if (!display || !display->get_update_mode)
+	if (!display)
 		return -EINVAL;
 
-	m = display->get_update_mode(display);
+	if (!display->driver->get_update_mode) {
+		*mode = OMAPFB_AUTO_UPDATE;
+		return 0;
+	}
+
+	m = display->driver->get_update_mode(display);
 
 	switch (m) {
 	case OMAP_DSS_UPDATE_DISABLED:
@@ -374,7 +379,7 @@ static int omapfb_memory_read(struct fb_info *fbi,
 	void *buf;
 	int r;
 
-	if (!display || !display->memory_read)
+	if (!display || !display->driver->memory_read)
 		return -ENOENT;
 
 	if (!access_ok(VERIFY_WRITE, mr->buffer, mr->buffer_size))
@@ -389,7 +394,7 @@ static int omapfb_memory_read(struct fb_info *fbi,
 		return -ENOMEM;
 	}
 
-	r = display->memory_read(display, buf, mr->buffer_size,
+	r = display->driver->memory_read(display, buf, mr->buffer_size,
 			mr->x, mr->y, mr->w, mr->h);
 
 	if (r > 0) {
@@ -483,6 +488,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 		struct omapfb_memory_read	memory_read;
 		struct omapfb_vram_info		vram_info;
 		struct omapfb_tearsync_info	tearsync_info;
+		struct omapfb_display_info	display_info;
 	} p;
 
 	int r = 0;
@@ -490,18 +496,18 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 	switch (cmd) {
 	case OMAPFB_SYNC_GFX:
 		DBG("ioctl SYNC_GFX\n");
-		if (!display || !display->sync) {
+		if (!display || !display->driver->sync) {
 			/* DSS1 never returns an error here, so we neither */
 			/*r = -EINVAL;*/
 			break;
 		}
 
-		r = display->sync(display);
+		r = display->driver->sync(display);
 		break;
 
 	case OMAPFB_UPDATE_WINDOW_OLD:
 		DBG("ioctl UPDATE_WINDOW_OLD\n");
-		if (!display || !display->update) {
+		if (!display || !display->driver->update) {
 			r = -EINVAL;
 			break;
 		}
@@ -519,7 +525,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 
 	case OMAPFB_UPDATE_WINDOW:
 		DBG("ioctl UPDATE_WINDOW\n");
-		if (!display || !display->update) {
+		if (!display || !display->driver->update) {
 			r = -EINVAL;
 			break;
 		}
@@ -648,7 +654,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 			break;
 		}
 
-		r = display->wait_vsync(display);
+		r = display->manager->wait_for_vsync(display->manager);
 		break;
 
 	case OMAPFB_WAITFORGO:
@@ -669,12 +675,12 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 			r = -EFAULT;
 			break;
 		}
-		if (!display || !display->run_test) {
+		if (!display || !display->driver->run_test) {
 			r = -EINVAL;
 			break;
 		}
 
-		r = display->run_test(display, p.test_num);
+		r = display->driver->run_test(display, p.test_num);
 
 		break;
 
@@ -684,12 +690,12 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 			r = -EFAULT;
 			break;
 		}
-		if (!display || !display->run_test) {
+		if (!display || !display->driver->run_test) {
 			r = -EINVAL;
 			break;
 		}
 
-		r = display->run_test(display, p.test_num);
+		r = display->driver->run_test(display, p.test_num);
 
 		break;
 
@@ -731,13 +737,37 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 			break;
 		}
 
-		if (!display->enable_te) {
+		if (!display->driver->enable_te) {
 			r = -ENODEV;
 			break;
 		}
 
-		r = display->enable_te(display, !!p.tearsync_info.enabled);
+		r = display->driver->enable_te(display,
+				!!p.tearsync_info.enabled);
+
+		break;
+	}
+
+	case OMAPFB_GET_DISPLAY_INFO: {
+		u16 xres, yres;
 
+		DBG("ioctl GET_DISPLAY_INFO\n");
+
+		if (display == NULL) {
+			r = -ENODEV;
+			break;
+		}
+
+		display->driver->get_resolution(display, &xres, &yres);
+
+		p.display_info.xres = xres;
+		p.display_info.yres = yres;
+		p.display_info.width = 0;
+		p.display_info.height = 0;
+
+		if (copy_to_user((void __user *)arg, &p.display_info,
+					sizeof(p.display_info)))
+			r = -EFAULT;
 		break;
 	}
 
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index d17caef6915a..4a76917b7cc8 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -54,6 +54,8 @@ module_param_named(test, omapfb_test_pattern, bool, 0644);
 #endif
 
 static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi);
+static int omapfb_get_recommended_bpp(struct omapfb2_device *fbdev,
+		struct omap_dss_device *dssdev);
 
 #ifdef DEBUG
 static void draw_pixel(struct fb_info *fbi, int x, int y, unsigned color)
@@ -152,9 +154,9 @@ static void fill_fb(struct fb_info *fbi)
 }
 #endif
 
-static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot)
+static unsigned omapfb_get_vrfb_offset(const struct omapfb_info *ofbi, int rot)
 {
-	struct vrfb *vrfb = &ofbi->region.vrfb;
+	const struct vrfb *vrfb = &ofbi->region.vrfb;
 	unsigned offset;
 
 	switch (rot) {
@@ -179,7 +181,7 @@ static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot)
 	return offset;
 }
 
-static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi, int rot)
+static u32 omapfb_get_region_rot_paddr(const struct omapfb_info *ofbi, int rot)
 {
 	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
 		return ofbi->region.vrfb.paddr[rot]
@@ -189,7 +191,7 @@ static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi, int rot)
 	}
 }
 
-static u32 omapfb_get_region_paddr(struct omapfb_info *ofbi)
+static u32 omapfb_get_region_paddr(const struct omapfb_info *ofbi)
 {
 	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
 		return ofbi->region.vrfb.paddr[0];
@@ -197,7 +199,7 @@ static u32 omapfb_get_region_paddr(struct omapfb_info *ofbi)
 		return ofbi->region.paddr;
 }
 
-static void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi)
+static void __iomem *omapfb_get_region_vaddr(const struct omapfb_info *ofbi)
 {
 	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
 		return ofbi->region.vrfb.vaddr[0];
@@ -703,9 +705,9 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
 	var->width              = -1;
 	var->grayscale          = 0;
 
-	if (display && display->get_timings) {
+	if (display && display->driver->get_timings) {
 		struct omap_video_timings timings;
-		display->get_timings(display, &timings);
+		display->driver->get_timings(display, &timings);
 
 		/* pixclock in ps, the rest in pixclock */
 		var->pixclock = timings.pixel_clock != 0 ?
@@ -778,8 +780,8 @@ static int omapfb_release(struct fb_info *fbi, int user)
 	return 0;
 }
 
-static unsigned calc_rotation_offset_dma(struct fb_var_screeninfo *var,
-		struct fb_fix_screeninfo *fix, int rotation)
+static unsigned calc_rotation_offset_dma(const struct fb_var_screeninfo *var,
+		const struct fb_fix_screeninfo *fix, int rotation)
 {
 	unsigned offset;
 
@@ -789,8 +791,8 @@ static unsigned calc_rotation_offset_dma(struct fb_var_screeninfo *var,
 	return offset;
 }
 
-static unsigned calc_rotation_offset_vrfb(struct fb_var_screeninfo *var,
-		struct fb_fix_screeninfo *fix, int rotation)
+static unsigned calc_rotation_offset_vrfb(const struct fb_var_screeninfo *var,
+		const struct fb_fix_screeninfo *fix, int rotation)
 {
 	unsigned offset;
 
@@ -1221,11 +1223,11 @@ static int omapfb_blank(int blank, struct fb_info *fbi)
 		if (display->state != OMAP_DSS_DISPLAY_SUSPENDED)
 			goto exit;
 
-		if (display->resume)
-			r = display->resume(display);
+		if (display->driver->resume)
+			r = display->driver->resume(display);
 
-		if (r == 0 && display->get_update_mode &&
-				display->get_update_mode(display) ==
+		if (r == 0 && display->driver->get_update_mode &&
+				display->driver->get_update_mode(display) ==
 				OMAP_DSS_UPDATE_MANUAL)
 			do_update = 1;
 
@@ -1240,8 +1242,8 @@ static int omapfb_blank(int blank, struct fb_info *fbi)
 		if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
 			goto exit;
 
-		if (display->suspend)
-			r = display->suspend(display);
+		if (display->driver->suspend)
+			r = display->driver->suspend(display);
 
 		break;
 
@@ -1252,11 +1254,11 @@ static int omapfb_blank(int blank, struct fb_info *fbi)
 exit:
 	omapfb_unlock(fbdev);
 
-	if (r == 0 && do_update && display->update) {
+	if (r == 0 && do_update && display->driver->update) {
 		u16 w, h;
-		display->get_resolution(display, &w, &h);
+		display->driver->get_resolution(display, &w, &h);
 
-		r = display->update(display, 0, 0, w, h);
+		r = display->driver->update(display, 0, 0, w, h);
 	}
 
 	return r;
@@ -1404,6 +1406,7 @@ static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size,
 		unsigned long paddr)
 {
 	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omap_dss_device *display;
 	int bytespp;
 
@@ -1412,7 +1415,7 @@ static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size,
 	if (!display)
 		return 0;
 
-	switch (display->get_recommended_bpp(display)) {
+	switch (omapfb_get_recommended_bpp(fbdev, display)) {
 	case 16:
 		bytespp = 2;
 		break;
@@ -1427,7 +1430,7 @@ static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size,
 	if (!size) {
 		u16 w, h;
 
-		display->get_resolution(display, &w, &h);
+		display->driver->get_resolution(display, &w, &h);
 
 		if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
 			size = max(omap_vrfb_min_phys_size(w, h, bytespp),
@@ -1636,8 +1639,8 @@ int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
 	if (old_size == size && old_type == type)
 		return 0;
 
-	if (display && display->sync)
-			display->sync(display);
+	if (display && display->driver->sync)
+			display->driver->sync(display);
 
 	omapfb_free_fbmem(fbi);
 
@@ -1745,7 +1748,7 @@ static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
 		u16 w, h;
 		int rotation = (var->rotate + ofbi->rotation[0]) % 4;
 
-		display->get_resolution(display, &w, &h);
+		display->driver->get_resolution(display, &w, &h);
 
 		if (rotation == FB_ROTATE_CW ||
 				rotation == FB_ROTATE_CCW) {
@@ -1760,7 +1763,7 @@ static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
 		var->yres_virtual = var->yres;
 
 		if (!var->bits_per_pixel) {
-			switch (display->get_recommended_bpp(display)) {
+			switch (omapfb_get_recommended_bpp(fbdev, display)) {
 			case 16:
 				var->bits_per_pixel = 16;
 				break;
@@ -1828,7 +1831,7 @@ static void omapfb_free_resources(struct omapfb2_device *fbdev)
 
 	for (i = 0; i < fbdev->num_displays; i++) {
 		if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED)
-			fbdev->displays[i]->disable(fbdev->displays[i]);
+			fbdev->displays[i]->driver->disable(fbdev->displays[i]);
 
 		omap_dss_put_device(fbdev->displays[i]);
 	}
@@ -2011,7 +2014,8 @@ static int omapfb_mode_to_timings(const char *mode_str,
 	}
 }
 
-static int omapfb_set_def_mode(struct omap_dss_device *display, char *mode_str)
+static int omapfb_set_def_mode(struct omapfb2_device *fbdev,
+		struct omap_dss_device *display, char *mode_str)
 {
 	int r;
 	u8 bpp;
@@ -2021,20 +2025,37 @@ static int omapfb_set_def_mode(struct omap_dss_device *display, char *mode_str)
 	if (r)
 		return r;
 
-	display->panel.recommended_bpp = bpp;
+	fbdev->bpp_overrides[fbdev->num_bpp_overrides].dssdev = display;
+	fbdev->bpp_overrides[fbdev->num_bpp_overrides].bpp = bpp;
+	++fbdev->num_bpp_overrides;
 
-	if (!display->check_timings || !display->set_timings)
+	if (!display->driver->check_timings || !display->driver->set_timings)
 		return -EINVAL;
 
-	r = display->check_timings(display, &timings);
+	r = display->driver->check_timings(display, &timings);
 	if (r)
 		return r;
 
-	display->set_timings(display, &timings);
+	display->driver->set_timings(display, &timings);
 
 	return 0;
 }
 
+static int omapfb_get_recommended_bpp(struct omapfb2_device *fbdev,
+		struct omap_dss_device *dssdev)
+{
+	int i;
+
+	BUG_ON(dssdev->driver->get_recommended_bpp == NULL);
+
+	for (i = 0; i < fbdev->num_bpp_overrides; ++i) {
+		if (dssdev == fbdev->bpp_overrides[i].dssdev)
+			return fbdev->bpp_overrides[i].bpp;
+	}
+
+	return dssdev->driver->get_recommended_bpp(dssdev);
+}
+
 static int omapfb_parse_def_modes(struct omapfb2_device *fbdev)
 {
 	char *str, *options, *this_opt;
@@ -2073,7 +2094,7 @@ static int omapfb_parse_def_modes(struct omapfb2_device *fbdev)
 			break;
 		}
 
-		r = omapfb_set_def_mode(display, mode_str);
+		r = omapfb_set_def_mode(fbdev, display, mode_str);
 		if (r)
 			break;
 	}
@@ -2111,18 +2132,23 @@ static int omapfb_probe(struct platform_device *pdev)
 	fbdev->dev = &pdev->dev;
 	platform_set_drvdata(pdev, fbdev);
 
+	r = 0;
 	fbdev->num_displays = 0;
 	dssdev = NULL;
 	for_each_dss_dev(dssdev) {
 		omap_dss_get_device(dssdev);
+
 		if (!dssdev->driver) {
 			dev_err(&pdev->dev, "no driver for display\n");
-			r = -EINVAL;
-			goto cleanup;
+			r = -ENODEV;
 		}
+
 		fbdev->displays[fbdev->num_displays++] = dssdev;
 	}
 
+	if (r)
+		goto cleanup;
+
 	if (fbdev->num_displays == 0) {
 		dev_err(&pdev->dev, "no displays\n");
 		r = -EINVAL;
@@ -2167,35 +2193,28 @@ static int omapfb_probe(struct platform_device *pdev)
 	}
 
 	if (def_display) {
-#ifndef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
-		u16 w, h;
-#endif
-		r = def_display->enable(def_display);
-		if (r)
+		struct omap_dss_driver *dssdrv = def_display->driver;
+
+		r = def_display->driver->enable(def_display);
+		if (r) {
 			dev_warn(fbdev->dev, "Failed to enable display '%s'\n",
 					def_display->name);
+			goto cleanup;
+		}
 
-		/* set the update mode */
 		if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
-#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
-			if (def_display->enable_te)
-				def_display->enable_te(def_display, 1);
-			if (def_display->set_update_mode)
-				def_display->set_update_mode(def_display,
-						OMAP_DSS_UPDATE_AUTO);
-#else /* MANUAL_UPDATE */
-			if (def_display->enable_te)
-				def_display->enable_te(def_display, 0);
-			if (def_display->set_update_mode)
-				def_display->set_update_mode(def_display,
+			u16 w, h;
+			if (dssdrv->enable_te)
+				dssdrv->enable_te(def_display, 1);
+			if (dssdrv->set_update_mode)
+				dssdrv->set_update_mode(def_display,
 						OMAP_DSS_UPDATE_MANUAL);
 
-			def_display->get_resolution(def_display, &w, &h);
-			def_display->update(def_display, 0, 0, w, h);
-#endif
+			dssdrv->get_resolution(def_display, &w, &h);
+			def_display->driver->update(def_display, 0, 0, w, h);
 		} else {
-			if (def_display->set_update_mode)
-				def_display->set_update_mode(def_display,
+			if (dssdrv->set_update_mode)
+				dssdrv->set_update_mode(def_display,
 						OMAP_DSS_UPDATE_AUTO);
 		}
 	}
diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h
index f7c9c739e5ef..cd54fdbfd8bb 100644
--- a/drivers/video/omap2/omapfb/omapfb.h
+++ b/drivers/video/omap2/omapfb/omapfb.h
@@ -83,6 +83,12 @@ struct omapfb2_device {
 	struct omap_overlay *overlays[10];
 	unsigned num_managers;
 	struct omap_overlay_manager *managers[10];
+
+	unsigned num_bpp_overrides;
+	struct {
+		struct omap_dss_device *dssdev;
+		u8 bpp;
+	} bpp_overrides[10];
 };
 
 struct omapfb_colormode {
@@ -105,6 +111,9 @@ void omapfb_remove_sysfs(struct omapfb2_device *fbdev);
 
 int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg);
 
+int omapfb_update_window(struct fb_info *fbi,
+		u32 x, u32 y, u32 w, u32 h);
+
 int dss_mode_to_fb_mode(enum omap_color_mode dssmode,
 			struct fb_var_screeninfo *var);
 
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 5b0d997f23ef..e2ea0b2159cd 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -126,6 +126,7 @@ header-y += nfs2.h
 header-y += nfs4_mount.h
 header-y += nfs_mount.h
 header-y += nl80211.h
+header-y += omapfb.h
 header-y += param.h
 header-y += pci_regs.h
 header-y += perf_event.h
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index f46c40ac6d45..9bdd91486b49 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -57,6 +57,7 @@
 #define OMAPFB_WAITFORGO	OMAP_IO(60)
 #define OMAPFB_GET_VRAM_INFO	OMAP_IOR(61, struct omapfb_vram_info)
 #define OMAPFB_SET_TEARSYNC	OMAP_IOW(62, struct omapfb_tearsync_info)
+#define OMAPFB_GET_DISPLAY_INFO	OMAP_IOR(63, struct omapfb_display_info)
 
 #define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
 #define OMAPFB_CAPS_LCDC_MASK		0x00fff000
@@ -206,6 +207,14 @@ struct omapfb_tearsync_info {
 	__u16 reserved2;
 };
 
+struct omapfb_display_info {
+	__u16 xres;
+	__u16 yres;
+	__u32 width;	/* phys width of the display in micrometers */
+	__u32 height;	/* phys height of the display in micrometers */
+	__u32 reserved[5];
+};
+
 #ifdef __KERNEL__
 
 #include <plat/board.h>