diff options
| author | Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> | 2013-03-19 12:37:26 +0530 |
|---|---|---|
| committer | James Bottomley <JBottomley@Parallels.com> | 2013-04-10 11:55:52 -0700 |
| commit | 2c10cd43ac0b618be1f2e394bef4cbb2aa8bad34 (patch) | |
| tree | 7bdfe559606cc5b8f8a129349116de491bd81023 | |
| parent | 162cca5ed9c28d5d0923179c2b5d6be0c4d4d72e (diff) | |
| download | blackbird-op-linux-2c10cd43ac0b618be1f2e394bef4cbb2aa8bad34.tar.gz blackbird-op-linux-2c10cd43ac0b618be1f2e394bef4cbb2aa8bad34.zip | |
[SCSI] aacraid: Dual firmware image support
This patch adds dual flash firmware support for Series 7 and above controllers.
[thenzl: used ssleep(10) instead udelay]
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| -rw-r--r-- | drivers/scsi/aacraid/aacraid.h | 6 | ||||
| -rw-r--r-- | drivers/scsi/aacraid/comminit.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/aacraid/src.c | 26 |
3 files changed, 31 insertions, 3 deletions
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index a6f7190c09a4..9323d058706b 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 30000 +# define AAC_DRIVER_BUILD 30200 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 @@ -1918,6 +1918,10 @@ extern struct aac_common aac_config; #define MONITOR_PANIC 0x00000020 #define KERNEL_UP_AND_RUNNING 0x00000080 #define KERNEL_PANIC 0x00000100 +#define FLASH_UPD_PENDING 0x00002000 +#define FLASH_UPD_SUCCESS 0x00004000 +#define FLASH_UPD_FAILED 0x00008000 +#define FWUPD_TIMEOUT (5 * 60) /* * Doorbell bit defines diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 3f759957f4b4..177b094c7792 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -214,7 +214,7 @@ int aac_send_shutdown(struct aac_dev * dev) cmd = (struct aac_close *) fib_data(fibctx); cmd->command = cpu_to_le32(VM_CloseAll); - cmd->cid = cpu_to_le32(0xffffffff); + cmd->cid = cpu_to_le32(0xfffffffe); status = aac_fib_send(ContainerCommand, fibctx, diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index e2e349204e7d..0f56d8d7524f 100644 --- a/drivers/scsi/aacraid/src.c +++ b/drivers/scsi/aacraid/src.c @@ -703,6 +703,28 @@ int aac_srcv_init(struct aac_dev *dev) !aac_src_restart_adapter(dev, 0)) ++restart; /* + * Check to see if flash update is running. + * Wait for the adapter to be up and running. Wait up to 5 minutes + */ + status = src_readl(dev, MUnit.OMR); + if (status & FLASH_UPD_PENDING) { + start = jiffies; + do { + status = src_readl(dev, MUnit.OMR); + if (time_after(jiffies, start+HZ*FWUPD_TIMEOUT)) { + printk(KERN_ERR "%s%d: adapter flash update failed.\n", + dev->name, instance); + goto error_iounmap; + } + } while (!(status & FLASH_UPD_SUCCESS) && + !(status & FLASH_UPD_FAILED)); + /* Delay 10 seconds. + * Because right now FW is doing a soft reset, + * do not read scratch pad register at this time + */ + ssleep(10); + } + /* * Check to see if the board panic'd while booting. */ status = src_readl(dev, MUnit.OMR); @@ -730,7 +752,9 @@ int aac_srcv_init(struct aac_dev *dev) /* * Wait for the adapter to be up and running. Wait up to 3 minutes */ - while (!((status = src_readl(dev, MUnit.OMR)) & KERNEL_UP_AND_RUNNING)) { + while (!((status = src_readl(dev, MUnit.OMR)) & + KERNEL_UP_AND_RUNNING) || + status == 0xffffffff) { if ((restart && (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) || time_after(jiffies, start+HZ*startup_timeout)) { |
