summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMatthew Garrett <mjg@redhat.com>2010-06-22 17:03:03 -0400
committerJesse Barnes <jbarnes@virtuousgeek.org>2010-07-30 09:29:34 -0700
commitea5f9fc5899660dd26c1ccf3fab183bd041140ee (patch)
treeb0d0517ee4064cfb587651b195ee5d2be864a8cc
parent8cc2bfd87fdd2f4a31f39c86f59df4b4be2c0adc (diff)
downloadblackbird-op-linux-ea5f9fc5899660dd26c1ccf3fab183bd041140ee.tar.gz
blackbird-op-linux-ea5f9fc5899660dd26c1ccf3fab183bd041140ee.zip
PCI: Default PCIe ASPM control to on and require !EMBEDDED to disable
The CONFIG_PCIEASPM option is confusing and potentially dangerous. ASPM is a hardware mediated feature rather than one under direct OS control, and even if the config option is disabled the system firmware may have turned on ASPM on various bits of hardware. This can cause problems later - various hardware that claims to support ASPM does a poor job of it and may hang or cause other difficulties. The kernel is able to recognise this in many cases and disable the ASPM functionality, but only if CONFIG_PCIEASPM is enabled. Given that in its default configuration this option will either leave the hardware as it was originally or disable hardware functionality that may cause problems, it should by default y. The only reason to disable it ought to be to reduce code size, so make it dependent on CONFIG_EMBEDDED. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: lrodriguez@atheros.com Cc: maximlevitsky@gmail.com Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-rw-r--r--drivers/pci/pcie/Kconfig20
1 files changed, 14 insertions, 6 deletions
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index b8b494b3e0d0..dda70981b7a6 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -31,14 +31,22 @@ source "drivers/pci/pcie/aer/Kconfig"
# PCI Express ASPM
#
config PCIEASPM
- bool "PCI Express ASPM support(Experimental)"
- depends on PCI && EXPERIMENTAL && PCIEPORTBUS
- default n
+ bool "PCI Express ASPM control" if EMBEDDED
+ depends on PCI && PCIEPORTBUS
+ default y
help
- This enables PCI Express ASPM (Active State Power Management) and
- Clock Power Management. ASPM supports state L0/L0s/L1.
+ This enables OS control over PCI Express ASPM (Active State
+ Power Management) and Clock Power Management. ASPM supports
+ state L0/L0s/L1.
- When in doubt, say N.
+ ASPM is initially set up the the firmware. With this option enabled,
+ Linux can modify this state in order to disable ASPM on known-bad
+ hardware or configurations and enable it when known-safe.
+
+ ASPM can be disabled or enabled at runtime via
+ /sys/module/pcie_aspm/parameters/policy
+
+ When in doubt, say Y.
config PCIEASPM_DEBUG
bool "Debug PCI Express ASPM"
depends on PCIEASPM
OpenPOWER on IntegriCloud