ALSA: hda/realtek - Remove leftover static quirks for ALC260

Now we can clean up all static quirks for ALC260.
Also many codes in alc_quirks.c can be ripped off since they have been
used only by ALC260 static quirks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

4 files changed, 9 insertions, 778 deletions

diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 53703392053a..2d34be304654 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -29,11 +29,7 @@ ALC880
 
 ALC260
 ======
-  basic		fixed pin assignment (old default model)
-  test		for testing/debugging purpose, almost all controls can
-		adjusted.  Appearing only when compiled with
-		$CONFIG_SND_DEBUG=y
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC262
 ======
diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c
deleted file mode 100644
index 305341f892c5..000000000000
--- a/sound/pci/hda/alc260_quirks.c
+++ /dev/null
@@ -1,432 +0,0 @@
-/*
- * ALC260 quirk models
- * included by patch_realtek.c
- */
-
-/* ALC260 models */
-enum {
-	ALC260_AUTO,
-	ALC260_BASIC,
-#ifdef CONFIG_SND_DEBUG
-	ALC260_TEST,
-#endif
-	ALC260_MODEL_LAST /* last tag */
-};
-
-static const hda_nid_t alc260_dac_nids[1] = {
-	/* front */
-	0x02,
-};
-
-static const hda_nid_t alc260_adc_nids[1] = {
-	/* ADC0 */
-	0x04,
-};
-
-static const hda_nid_t alc260_adc_nids_alt[1] = {
-	/* ADC1 */
-	0x05,
-};
-
-/* NIDs used when simultaneous access to both ADCs makes sense.  Note that
- * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
- */
-static const hda_nid_t alc260_dual_adc_nids[2] = {
-	/* ADC0, ADC1 */
-	0x04, 0x05
-};
-
-#define ALC260_DIGOUT_NID	0x03
-#define ALC260_DIGIN_NID	0x06
-
-static const struct hda_input_mux alc260_capture_source = {
-	.num_items = 4,
-	.items = {
-		{ "Mic", 0x0 },
-		{ "Front Mic", 0x1 },
-		{ "Line", 0x2 },
-		{ "CD", 0x4 },
-	},
-};
-
-/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to
- * the Fujitsu S702x, but jacks are marked differently.
- */
-static const struct hda_input_mux alc260_acer_capture_sources[2] = {
-	{
-		.num_items = 4,
-		.items = {
-			{ "Mic", 0x0 },
-			{ "Line", 0x2 },
-			{ "CD", 0x4 },
-			{ "Headphone", 0x5 },
-		},
-	},
-	{
-		.num_items = 5,
-		.items = {
-			{ "Mic", 0x0 },
-			{ "Line", 0x2 },
-			{ "CD", 0x4 },
-			{ "Headphone", 0x6 },
-			{ "Mixer", 0x5 },
-		},
-	},
-};
-
-/*
- * This is just place-holder, so there's something for alc_build_pcms to look
- * at when it calculates the maximum number of channels. ALC260 has no mixer
- * element which allows changing the channel mode, so the verb list is
- * never used.
- */
-static const struct hda_channel_mode alc260_modes[1] = {
-	{ 2, NULL },
-};
-
-
-/* Mixer combinations
- *
- * basic: base_output + input + pc_beep + capture
- * fujitsu: fujitsu + capture
- * acer: acer + capture
- */
-
-static const struct snd_kcontrol_new alc260_base_output_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
-	{ } /* end */
-};
-
-static const struct snd_kcontrol_new alc260_input_mixer[] = {
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
-	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
-	{ } /* end */
-};
-
-/*
- * initialization verbs
- */
-static const struct hda_verb alc260_init_verbs[] = {
-	/* Line In pin widget for input */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	/* CD pin widget for input */
-	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	/* Mic1 (rear panel) pin widget for input and vref at 80% */
-	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	/* Mic2 (front panel) pin widget for input and vref at 80% */
-	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	/* LINE-2 is used for line-out in rear */
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	/* select line-out */
-	{0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* LINE-OUT pin */
-	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	/* enable HP */
-	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	/* enable Mono */
-	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	/* mute capture amp left and right */
-	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	/* set connection select to line in (default select for this ADC) */
-	{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
-	/* mute capture amp left and right */
-	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	/* set connection select to line in (default select for this ADC) */
-	{0x05, AC_VERB_SET_CONNECT_SEL, 0x02},
-	/* set vol=0 Line-Out mixer amp left and right */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	/* unmute pin widget amp left and right (no gain on this amp) */
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* set vol=0 HP mixer amp left and right */
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	/* unmute pin widget amp left and right (no gain on this amp) */
-	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* set vol=0 Mono mixer amp left and right */
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	/* unmute pin widget amp left and right (no gain on this amp) */
-	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* unmute LINE-2 out pin */
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
-	 * Line In 2 = 0x03
-	 */
-	/* mute analog inputs */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-	/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
-	/* mute Front out path */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* mute Headphone out path */
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* mute Mono out path */
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{ }
-};
-
-static const struct hda_verb alc260_hp_dc7600_verbs[] = {
-	{0x05, AC_VERB_SET_CONNECT_SEL, 0x01},
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
-	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
-	{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
-	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
-	{}
-};
-
-/* Test configuration for debugging, modelled after the ALC880 test
- * configuration.
- */
-#ifdef CONFIG_SND_DEBUG
-static const hda_nid_t alc260_test_dac_nids[1] = {
-	0x02,
-};
-static const hda_nid_t alc260_test_adc_nids[2] = {
-	0x04, 0x05,
-};
-/* For testing the ALC260, each input MUX needs its own definition since
- * the signal assignments are different.  This assumes that the first ADC
- * is NID 0x04.
- */
-static const struct hda_input_mux alc260_test_capture_sources[2] = {
-	{
-		.num_items = 7,
-		.items = {
-			{ "MIC1 pin", 0x0 },
-			{ "MIC2 pin", 0x1 },
-			{ "LINE1 pin", 0x2 },
-			{ "LINE2 pin", 0x3 },
-			{ "CD pin", 0x4 },
-			{ "LINE-OUT pin", 0x5 },
-			{ "HP-OUT pin", 0x6 },
-		},
-        },
-	{
-		.num_items = 8,
-		.items = {
-			{ "MIC1 pin", 0x0 },
-			{ "MIC2 pin", 0x1 },
-			{ "LINE1 pin", 0x2 },
-			{ "LINE2 pin", 0x3 },
-			{ "CD pin", 0x4 },
-			{ "Mixer", 0x5 },
-			{ "LINE-OUT pin", 0x6 },
-			{ "HP-OUT pin", 0x7 },
-		},
-        },
-};
-static const struct snd_kcontrol_new alc260_test_mixer[] = {
-	/* Output driver widgets */
-	HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT),
-
-	/* Modes for retasking pin widgets
-	 * Note: the ALC260 doesn't seem to act on requests to enable mic
-         * bias from NIDs 0x0f and 0x10.  The ALC260 datasheet doesn't
-         * mention this restriction.  At this stage it's not clear whether
-         * this behaviour is intentional or is a hardware bug in chip
-         * revisions available at least up until early 2006.  Therefore for
-         * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all
-         * choices, but if it turns out that the lack of mic bias for these
-         * NIDs is intentional we could change their modes from
-         * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
-	 */
-	ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT),
-	ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT),
-	ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT),
-	ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT),
-	ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT),
-	ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT),
-
-	/* Loopback mixer controls */
-	HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT),
-	HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT),
-	HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT),
-	HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT),
-	HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT),
-	HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT),
-	HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT),
-	HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT),
-	HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT),
-
-	/* Controls for GPIO pins, assuming they are configured as outputs */
-	ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
-	ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
-	ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
-	ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
-
-	/* Switches to allow the digital IO pins to be enabled.  The datasheet
-	 * is ambigious as to which NID is which; testing on laptops which
-	 * make this output available should provide clarification.
-	 */
-	ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01),
-	ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01),
-
-	/* A switch allowing EAPD to be enabled.  Some laptops seem to use
-	 * this output to turn on an external amplifier.
-	 */
-	ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02),
-	ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02),
-
-	{ } /* end */
-};
-static const struct hda_verb alc260_test_init_verbs[] = {
-	/* Enable all GPIOs as outputs with an initial value of 0 */
-	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f},
-	{0x01, AC_VERB_SET_GPIO_DATA, 0x00},
-	{0x01, AC_VERB_SET_GPIO_MASK, 0x0f},
-
-	/* Enable retasking pins as output, initially without power amp */
-	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-
-	/* Disable digital (SPDIF) pins initially, but users can enable
-	 * them via a mixer switch.  In the case of SPDIF-out, this initverb
-	 * payload also sets the generation to 0, output to be in "consumer"
-	 * PCM format, copyright asserted, no pre-emphasis and no validity
-	 * control.
-	 */
-	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
-	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
-	/* Ensure mic1, mic2, line1 and line2 pin widgets take input from the
-	 * OUT1 sum bus when acting as an output.
-	 */
-	{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
-	{0x0c, AC_VERB_SET_CONNECT_SEL, 0},
-	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
-	{0x0e, AC_VERB_SET_CONNECT_SEL, 0},
-
-	/* Start with output sum widgets muted and their output gains at min */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
-	/* Unmute retasking pin widget output buffers since the default
-	 * state appears to be output.  As the pin mode is changed by the
-	 * user the pin mode control will take care of enabling the pin's
-	 * input/output buffers as needed.
-	 */
-	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Also unmute the mono-out pin widget */
-	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
-	/* Mute capture amp left and right */
-	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	/* Set ADC connection select to match default mixer setting (mic1
-	 * pin)
-	 */
-	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Do the same for the second ADC: mute capture input amp and
-	 * set ADC connection to mic1 pin
-	 */
-	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Mute all inputs to mixer widget (even unconnected ones) */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-
-	{ }
-};
-#endif
-
-/*
- * ALC260 configurations
- */
-static const char * const alc260_models[ALC260_MODEL_LAST] = {
-	[ALC260_BASIC]		= "basic",
-#ifdef CONFIG_SND_DEBUG
-	[ALC260_TEST]		= "test",
-#endif
-	[ALC260_AUTO]		= "auto",
-};
-
-static const struct snd_pci_quirk alc260_cfg_tbl[] = {
-	SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC),
-	SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
-	SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
-	SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
-	{}
-};
-
-static const struct alc_config_preset alc260_presets[] = {
-	[ALC260_BASIC] = {
-		.mixers = { alc260_base_output_mixer,
-			    alc260_input_mixer },
-		.init_verbs = { alc260_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
-		.dac_nids = alc260_dac_nids,
-		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
-		.adc_nids = alc260_dual_adc_nids,
-		.num_channel_mode = ARRAY_SIZE(alc260_modes),
-		.channel_mode = alc260_modes,
-		.input_mux = &alc260_capture_source,
-	},
-#ifdef CONFIG_SND_DEBUG
-	[ALC260_TEST] = {
-		.mixers = { alc260_test_mixer },
-		.init_verbs = { alc260_test_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc260_test_dac_nids),
-		.dac_nids = alc260_test_dac_nids,
-		.num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids),
-		.adc_nids = alc260_test_adc_nids,
-		.num_channel_mode = ARRAY_SIZE(alc260_modes),
-		.channel_mode = alc260_modes,
-		.num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources),
-		.input_mux = alc260_test_capture_sources,
-	},
-#endif
-};
-
diff --git a/sound/pci/hda/alc_quirks.c b/sound/pci/hda/alc_quirks.c
index a18952ed4311..b344603ac06d 100644
--- a/sound/pci/hda/alc_quirks.c
+++ b/sound/pci/hda/alc_quirks.c
@@ -74,307 +74,6 @@ static int alc_ch_mode_put(struct snd_kcontrol *kcontrol,
 	return err;
 }
 
-/*
- * Control the mode of pin widget settings via the mixer.  "pc" is used
- * instead of "%" to avoid consequences of accidentally treating the % as
- * being part of a format specifier.  Maximum allowed length of a value is
- * 63 characters plus NULL terminator.
- *
- * Note: some retasking pin complexes seem to ignore requests for input
- * states other than HiZ (eg: PIN_VREFxx) and revert to HiZ if any of these
- * are requested.  Therefore order this list so that this behaviour will not
- * cause problems when mixer clients move through the enum sequentially.
- * NIDs 0x0f and 0x10 have been observed to have this behaviour as of
- * March 2006.
- */
-static const char * const alc_pin_mode_names[] = {
-	"Mic 50pc bias", "Mic 80pc bias",
-	"Line in", "Line out", "Headphone out",
-};
-static const unsigned char alc_pin_mode_values[] = {
-	PIN_VREF50, PIN_VREF80, PIN_IN, PIN_OUT, PIN_HP,
-};
-/* The control can present all 5 options, or it can limit the options based
- * in the pin being assumed to be exclusively an input or an output pin.  In
- * addition, "input" pins may or may not process the mic bias option
- * depending on actual widget capability (NIDs 0x0f and 0x10 don't seem to
- * accept requests for bias as of chip versions up to March 2006) and/or
- * wiring in the computer.
- */
-#define ALC_PIN_DIR_IN              0x00
-#define ALC_PIN_DIR_OUT             0x01
-#define ALC_PIN_DIR_INOUT           0x02
-#define ALC_PIN_DIR_IN_NOMICBIAS    0x03
-#define ALC_PIN_DIR_INOUT_NOMICBIAS 0x04
-
-/* Info about the pin modes supported by the different pin direction modes.
- * For each direction the minimum and maximum values are given.
- */
-static const signed char alc_pin_mode_dir_info[5][2] = {
-	{ 0, 2 },    /* ALC_PIN_DIR_IN */
-	{ 3, 4 },    /* ALC_PIN_DIR_OUT */
-	{ 0, 4 },    /* ALC_PIN_DIR_INOUT */
-	{ 2, 2 },    /* ALC_PIN_DIR_IN_NOMICBIAS */
-	{ 2, 4 },    /* ALC_PIN_DIR_INOUT_NOMICBIAS */
-};
-#define alc_pin_mode_min(_dir) (alc_pin_mode_dir_info[_dir][0])
-#define alc_pin_mode_max(_dir) (alc_pin_mode_dir_info[_dir][1])
-#define alc_pin_mode_n_items(_dir) \
-	(alc_pin_mode_max(_dir)-alc_pin_mode_min(_dir)+1)
-
-static int alc_pin_mode_info(struct snd_kcontrol *kcontrol,
-			     struct snd_ctl_elem_info *uinfo)
-{
-	unsigned int item_num = uinfo->value.enumerated.item;
-	unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
-
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
-	uinfo->count = 1;
-	uinfo->value.enumerated.items = alc_pin_mode_n_items(dir);
-
-	if (item_num<alc_pin_mode_min(dir) || item_num>alc_pin_mode_max(dir))
-		item_num = alc_pin_mode_min(dir);
-	strcpy(uinfo->value.enumerated.name, alc_pin_mode_names[item_num]);
-	return 0;
-}
-
-static int alc_pin_mode_get(struct snd_kcontrol *kcontrol,
-			    struct snd_ctl_elem_value *ucontrol)
-{
-	unsigned int i;
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
-	long *valp = ucontrol->value.integer.value;
-	unsigned int pinctl = snd_hda_codec_read(codec, nid, 0,
-						 AC_VERB_GET_PIN_WIDGET_CONTROL,
-						 0x00);
-
-	/* Find enumerated value for current pinctl setting */
-	i = alc_pin_mode_min(dir);
-	while (i <= alc_pin_mode_max(dir) && alc_pin_mode_values[i] != pinctl)
-		i++;
-	*valp = i <= alc_pin_mode_max(dir) ? i: alc_pin_mode_min(dir);
-	return 0;
-}
-
-static int alc_pin_mode_put(struct snd_kcontrol *kcontrol,
-			    struct snd_ctl_elem_value *ucontrol)
-{
-	signed int change;
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
-	long val = *ucontrol->value.integer.value;
-	unsigned int pinctl = snd_hda_codec_read(codec, nid, 0,
-						 AC_VERB_GET_PIN_WIDGET_CONTROL,
-						 0x00);
-
-	if (val < alc_pin_mode_min(dir) || val > alc_pin_mode_max(dir))
-		val = alc_pin_mode_min(dir);
-
-	change = pinctl != alc_pin_mode_values[val];
-	if (change) {
-		/* Set pin mode to that requested */
-		snd_hda_codec_write_cache(codec, nid, 0,
-					  AC_VERB_SET_PIN_WIDGET_CONTROL,
-					  alc_pin_mode_values[val]);
-
-		/* Also enable the retasking pin's input/output as required
-		 * for the requested pin mode.  Enum values of 2 or less are
-		 * input modes.
-		 *
-		 * Dynamically switching the input/output buffers probably
-		 * reduces noise slightly (particularly on input) so we'll
-		 * do it.  However, having both input and output buffers
-		 * enabled simultaneously doesn't seem to be problematic if
-		 * this turns out to be necessary in the future.
-		 */
-		if (val <= 2) {
-			snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
-						 HDA_AMP_MUTE, HDA_AMP_MUTE);
-			snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0,
-						 HDA_AMP_MUTE, 0);
-		} else {
-			snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0,
-						 HDA_AMP_MUTE, HDA_AMP_MUTE);
-			snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
-						 HDA_AMP_MUTE, 0);
-		}
-	}
-	return change;
-}
-
-#define ALC_PIN_MODE(xname, nid, dir) \
-	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0,  \
-	  .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
-	  .info = alc_pin_mode_info, \
-	  .get = alc_pin_mode_get, \
-	  .put = alc_pin_mode_put, \
-	  .private_value = nid | (dir<<16) }
-
-/* A switch control for ALC260 GPIO pins.  Multiple GPIOs can be ganged
- * together using a mask with more than one bit set.  This control is
- * currently used only by the ALC260 test model.  At this stage they are not
- * needed for any "production" models.
- */
-#ifdef CONFIG_SND_DEBUG
-#define alc_gpio_data_info	snd_ctl_boolean_mono_info
-
-static int alc_gpio_data_get(struct snd_kcontrol *kcontrol,
-			     struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
-	long *valp = ucontrol->value.integer.value;
-	unsigned int val = snd_hda_codec_read(codec, nid, 0,
-					      AC_VERB_GET_GPIO_DATA, 0x00);
-
-	*valp = (val & mask) != 0;
-	return 0;
-}
-static int alc_gpio_data_put(struct snd_kcontrol *kcontrol,
-			     struct snd_ctl_elem_value *ucontrol)
-{
-	signed int change;
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
-	long val = *ucontrol->value.integer.value;
-	unsigned int gpio_data = snd_hda_codec_read(codec, nid, 0,
-						    AC_VERB_GET_GPIO_DATA,
-						    0x00);
-
-	/* Set/unset the masked GPIO bit(s) as needed */
-	change = (val == 0 ? 0 : mask) != (gpio_data & mask);
-	if (val == 0)
-		gpio_data &= ~mask;
-	else
-		gpio_data |= mask;
-	snd_hda_codec_write_cache(codec, nid, 0,
-				  AC_VERB_SET_GPIO_DATA, gpio_data);
-
-	return change;
-}
-#define ALC_GPIO_DATA_SWITCH(xname, nid, mask) \
-	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0,  \
-	  .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
-	  .info = alc_gpio_data_info, \
-	  .get = alc_gpio_data_get, \
-	  .put = alc_gpio_data_put, \
-	  .private_value = nid | (mask<<16) }
-#endif   /* CONFIG_SND_DEBUG */
-
-/* A switch control to allow the enabling of the digital IO pins on the
- * ALC260.  This is incredibly simplistic; the intention of this control is
- * to provide something in the test model allowing digital outputs to be
- * identified if present.  If models are found which can utilise these
- * outputs a more complete mixer control can be devised for those models if
- * necessary.
- */
-#ifdef CONFIG_SND_DEBUG
-#define alc_spdif_ctrl_info	snd_ctl_boolean_mono_info
-
-static int alc_spdif_ctrl_get(struct snd_kcontrol *kcontrol,
-			      struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
-	long *valp = ucontrol->value.integer.value;
-	unsigned int val = snd_hda_codec_read(codec, nid, 0,
-					      AC_VERB_GET_DIGI_CONVERT_1, 0x00);
-
-	*valp = (val & mask) != 0;
-	return 0;
-}
-static int alc_spdif_ctrl_put(struct snd_kcontrol *kcontrol,
-			      struct snd_ctl_elem_value *ucontrol)
-{
-	signed int change;
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
-	long val = *ucontrol->value.integer.value;
-	unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0,
-						    AC_VERB_GET_DIGI_CONVERT_1,
-						    0x00);
-
-	/* Set/unset the masked control bit(s) as needed */
-	change = (val == 0 ? 0 : mask) != (ctrl_data & mask);
-	if (val==0)
-		ctrl_data &= ~mask;
-	else
-		ctrl_data |= mask;
-	snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
-				  ctrl_data);
-
-	return change;
-}
-#define ALC_SPDIF_CTRL_SWITCH(xname, nid, mask) \
-	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0,  \
-	  .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
-	  .info = alc_spdif_ctrl_info, \
-	  .get = alc_spdif_ctrl_get, \
-	  .put = alc_spdif_ctrl_put, \
-	  .private_value = nid | (mask<<16) }
-#endif   /* CONFIG_SND_DEBUG */
-
-/* A switch control to allow the enabling EAPD digital outputs on the ALC26x.
- * Again, this is only used in the ALC26x test models to help identify when
- * the EAPD line must be asserted for features to work.
- */
-#ifdef CONFIG_SND_DEBUG
-#define alc_eapd_ctrl_info	snd_ctl_boolean_mono_info
-
-static int alc_eapd_ctrl_get(struct snd_kcontrol *kcontrol,
-			      struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
-	long *valp = ucontrol->value.integer.value;
-	unsigned int val = snd_hda_codec_read(codec, nid, 0,
-					      AC_VERB_GET_EAPD_BTLENABLE, 0x00);
-
-	*valp = (val & mask) != 0;
-	return 0;
-}
-
-static int alc_eapd_ctrl_put(struct snd_kcontrol *kcontrol,
-			      struct snd_ctl_elem_value *ucontrol)
-{
-	int change;
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
-	long val = *ucontrol->value.integer.value;
-	unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0,
-						    AC_VERB_GET_EAPD_BTLENABLE,
-						    0x00);
-
-	/* Set/unset the masked control bit(s) as needed */
-	change = (!val ? 0 : mask) != (ctrl_data & mask);
-	if (!val)
-		ctrl_data &= ~mask;
-	else
-		ctrl_data |= mask;
-	snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE,
-				  ctrl_data);
-
-	return change;
-}
-
-#define ALC_EAPD_CTRL_SWITCH(xname, nid, mask) \
-	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0,  \
-	  .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
-	  .info = alc_eapd_ctrl_info, \
-	  .get = alc_eapd_ctrl_get, \
-	  .put = alc_eapd_ctrl_put, \
-	  .private_value = nid | (mask<<16) }
-#endif   /* CONFIG_SND_DEBUG */
-
 static void alc_fixup_autocfg_pin_nums(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 0d81eeb563c7..3ea42069b8ee 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4308,14 +4308,10 @@ static const struct snd_pci_quirk alc260_fixup_tbl[] = {
 
 /*
  */
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
-#include "alc260_quirks.c"
-#endif
-
 static int patch_alc260(struct hda_codec *codec)
 {
 	struct alc_spec *spec;
-	int err, board_config;
+	int err;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -4325,38 +4321,13 @@ static int patch_alc260(struct hda_codec *codec)
 
 	spec->mixer_nid = 0x07;
 
-	board_config = alc_board_config(codec, ALC260_MODEL_LAST,
-					alc260_models, alc260_cfg_tbl);
-	if (board_config < 0) {
-		snd_printd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
-			   codec->chip_name);
-		board_config = ALC_MODEL_AUTO;
-	}
-
-	if (board_config == ALC_MODEL_AUTO) {
-		alc_pick_fixup(codec, NULL, alc260_fixup_tbl, alc260_fixups);
-		alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
-	}
-
-	if (board_config == ALC_MODEL_AUTO) {
-		/* automatic parse from the BIOS config */
-		err = alc260_parse_auto_config(codec);
-		if (err < 0)
-			goto error;
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
-		else if (!err) {
-			printk(KERN_INFO
-			       "hda_codec: Cannot set up configuration "
-			       "from BIOS.  Using base mode...\n");
-			board_config = ALC260_BASIC;
-		}
-#endif
-	}
+	alc_pick_fixup(codec, NULL, alc260_fixup_tbl, alc260_fixups);
+	alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
 
-	if (board_config != ALC_MODEL_AUTO) {
-		setup_preset(codec, &alc260_presets[board_config]);
-		spec->vmaster_nid = 0x08;
-	}
+	/* automatic parse from the BIOS config */
+	err = alc260_parse_auto_config(codec);
+	if (err < 0)
+		goto error;
 
 	if (!spec->no_analog && !spec->adc_nids) {
 		alc_auto_fill_adc_caps(codec);
@@ -4377,10 +4348,7 @@ static int patch_alc260(struct hda_codec *codec)
 	alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
 
 	codec->patch_ops = alc_patch_ops;
-	if (board_config == ALC_MODEL_AUTO)
-		spec->init_hook = alc_auto_init_std;
-	else
-		codec->patch_ops.build_controls = __alc_build_controls;
+	spec->init_hook = alc_auto_init_std;
 	spec->shutup = alc_eapd_shutup;
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	if (!spec->loopback.amplist)