summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDaniel Mack <zonque@gmail.com>2013-06-24 16:31:32 +0200
committerMark Brown <broonie@linaro.org>2013-06-25 10:32:21 +0100
commit97d0a868450d08fae0db3f53459852901c6e2f4f (patch)
tree29160aea6bd860b3812cc94ccafe76be442b844c
parent45405d58924f49a13b924ed6db6fe47981487b4a (diff)
downloadblackbird-op-linux-97d0a868450d08fae0db3f53459852901c6e2f4f.tar.gz
blackbird-op-linux-97d0a868450d08fae0db3f53459852901c6e2f4f.zip
ASoC: adau1701: add support for pin muxing
The ADAU1701 has 12 pins that can be configured depending on the system configuration. Allow settting the corresponding registers from DT. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
-rw-r--r--Documentation/devicetree/bindings/sound/adi,adau1701.txt6
-rw-r--r--sound/soc/codecs/adau1701.c32
2 files changed, 36 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1701.txt b/Documentation/devicetree/bindings/sound/adi,adau1701.txt
index a9fbed1be40e..547a49b56a62 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau1701.txt
+++ b/Documentation/devicetree/bindings/sound/adi,adau1701.txt
@@ -16,6 +16,10 @@ Optional properties:
The state of the pins are set according to the
configured clock divider on ASoC side before the
firmware is loaded.
+ - adi,pin-config: An array of 12 numerical values selecting one of the
+ pin configurations as described in the datasheet,
+ table 53. Note that the value of this property has
+ to be prefixed with '/bits/ 8'.
Examples:
@@ -25,5 +29,7 @@ Examples:
reg = <0x34>;
reset-gpio = <&gpio 23 0>;
adi,pll-mode-gpios = <&gpio 24 0 &gpio 25 0>;
+ adi,pin-config = /bits/ 8 <0x4 0x7 0x5 0x5 0x4 0x4
+ 0x4 0x4 0x4 0x4 0x4 0x4>;
};
};
diff --git a/sound/soc/codecs/adau1701.c b/sound/soc/codecs/adau1701.c
index 881bab4a65aa..0e250f118c0e 100644
--- a/sound/soc/codecs/adau1701.c
+++ b/sound/soc/codecs/adau1701.c
@@ -30,6 +30,9 @@
#define ADAU1701_SERICTL 0x081f
#define ADAU1701_AUXNPOW 0x0822
+#define ADAU1701_PINCONF_0 0x0820
+#define ADAU1701_PINCONF_1 0x0821
+#define ADAU1701_AUXNPOW 0x0822
#define ADAU1701_OSCIPOW 0x0826
#define ADAU1701_DACSET 0x0827
@@ -99,6 +102,7 @@ struct adau1701 {
unsigned int pll_clkdiv;
unsigned int sysclk;
struct regmap *regmap;
+ u8 pin_config[12];
};
static const struct snd_kcontrol_new adau1701_controls[] = {
@@ -134,6 +138,9 @@ static unsigned int adau1701_register_size(struct device *dev,
unsigned int reg)
{
switch (reg) {
+ case ADAU1701_PINCONF_0:
+ case ADAU1701_PINCONF_1:
+ return 3;
case ADAU1701_DSPCTRL:
case ADAU1701_SEROCTL:
case ADAU1701_AUXNPOW:
@@ -164,7 +171,7 @@ static int adau1701_reg_write(void *context, unsigned int reg,
struct i2c_client *client = context;
unsigned int i;
unsigned int size;
- uint8_t buf[4];
+ uint8_t buf[5];
int ret;
size = adau1701_register_size(&client->dev, reg);
@@ -584,7 +591,8 @@ MODULE_DEVICE_TABLE(of, adau1701_dt_ids);
static int adau1701_probe(struct snd_soc_codec *codec)
{
- int ret;
+ int i, ret;
+ unsigned int val;
struct adau1701 *adau1701 = snd_soc_codec_get_drvdata(codec);
codec->control_data = to_i2c_client(codec->dev);
@@ -602,6 +610,19 @@ static int adau1701_probe(struct snd_soc_codec *codec)
if (ret < 0)
return ret;
+ /* set up pin config */
+ val = 0;
+ for (i = 0; i < 6; i++)
+ val |= adau1701->pin_config[i] << (i * 4);
+
+ regmap_write(adau1701->regmap, ADAU1701_PINCONF_0, val);
+
+ val = 0;
+ for (i = 0; i < 6; i++)
+ val |= adau1701->pin_config[i + 6] << (i * 4);
+
+ regmap_write(adau1701->regmap, ADAU1701_PINCONF_1, val);
+
return 0;
}
@@ -662,6 +683,13 @@ static int adau1701_i2c_probe(struct i2c_client *client,
"adi,pll-mode-gpios", 1);
if (gpio_pll_mode[1] < 0 && gpio_pll_mode[1] != -ENOENT)
return gpio_pll_mode[1];
+
+ of_property_read_u32(dev->of_node, "adi,pll-clkdiv",
+ &adau1701->pll_clkdiv);
+
+ of_property_read_u8_array(dev->of_node, "adi,pin-config",
+ adau1701->pin_config,
+ ARRAY_SIZE(adau1701->pin_config));
}
if (gpio_is_valid(gpio_nreset)) {
OpenPOWER on IntegriCloud