powerpc: Merge in 64-bit powermac support.

This brings in a lot of changes from arch/ppc64/kernel/pmac_*.c to
arch/powerpc/platforms/powermac/*.c and makes various minor tweaks
elsewhere.  On the powermac we now initialize ppc_md by copying
the whole pmac_md structure into it, which required some changes in
the ordering of initializations of individual fields of it.

Signed-off-by: Paul Mackerras <paulus@samba.org>

17 files changed, 1143 insertions, 817 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e70f7049cc6f..27f122e1f849 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -290,6 +290,7 @@ config PPC_PMAC
 config PPC_PMAC64
 	bool
 	depends on PPC_PMAC && POWER4
+	select U3_DART
 	default y
 
 config PPC_PREP
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 72b0d26e41d4..147215a0d6c0 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -1501,20 +1501,17 @@ copy_to_here:
 	.section ".text";
 	.align 2 ;
 
-	.globl	pmac_secondary_start_1	
-pmac_secondary_start_1:	
-	li	r24, 1
-	b	.pmac_secondary_start
-	
-	.globl pmac_secondary_start_2
-pmac_secondary_start_2:	
-	li	r24, 2
-	b	.pmac_secondary_start
-	
-	.globl pmac_secondary_start_3
-pmac_secondary_start_3:
-	li	r24, 3
-	b	.pmac_secondary_start
+	.globl	__secondary_start_pmac_0
+__secondary_start_pmac_0:
+	/* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
+	li	r24,0
+	b	1f
+	li	r24,1
+	b	1f
+	li	r24,2
+	b	1f
+	li	r24,3
+1:
 	
 _GLOBAL(pmac_secondary_start)
 	/* turn on 64-bit mode */
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 9b1baaa9eda0..095659d51b4b 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -772,7 +772,7 @@ static unsigned long __init prom_next_cell(int s, cell_t **cellp)
 	}
 	r = *p++;
 #ifdef CONFIG_PPC64
-	if (s) {
+	if (s > 1) {
 		r <<= 32;
 		r |= *(p++);
 	}
@@ -2059,7 +2059,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	reloc_got2(-offset);
 #endif
 
-	__start(hdr, 0, 0);
+	__start(hdr, KERNELBASE + offset, 0);
 
 	return 0;
 }
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index b9269c038af3..2d7fdeb581d1 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -464,14 +464,11 @@ void __init machine_init(unsigned long dt_ptr, unsigned long phys)
 	strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
 #endif /* CONFIG_CMDLINE */
 
+	platform_init();
+
 #ifdef CONFIG_6xx
 	ppc_md.power_save = ppc6xx_idle;
 #endif
-#ifdef CONFIG_POWER4
-	ppc_md.power_save = power4_idle;
-#endif
-
-	platform_init();
 
 	if (ppc_md.progress)
 		ppc_md.progress("id mach(): done", 0x200);
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index da744d5e52fd..9b54e805b8aa 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -1,4 +1,4 @@
-ifeq ($(CONFIG_PPC32),y)
+ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_PMAC)		+= powermac/
 endif
 obj-$(CONFIG_4xx)		+= 4xx/
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 74712ede16df..4369676f1d54 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -1,8 +1,8 @@
-obj-$(CONFIG_PPC_PMAC)		+= pic.o setup.o time.o feature.o pci.o \
+obj-y				+= pic.o setup.o time.o feature.o pci.o \
 				   sleep.o low_i2c.o cache.o
 obj-$(CONFIG_PMAC_BACKLIGHT)	+= backlight.o
 obj-$(CONFIG_CPU_FREQ_PMAC)	+= cpufreq.o
-ifeq ($(CONFIG_PPC_PMAC),y)
 obj-$(CONFIG_NVRAM)		+= nvram.o
+# ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff
+obj-$(CONFIG_PPC64)		+= nvram.o
 obj-$(CONFIG_SMP)		+= smp.o
-endif
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 243a24fd025a..10f1d942c661 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2960,7 +2960,6 @@ static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
 
 void __init pmac_check_ht_link(void)
 {
-#if 0 /* Disabled for now */
 	u32	ufreq, freq, ucfg, cfg;
 	struct device_node *pcix_node;
 	u8	px_bus, px_devfn;
@@ -2991,10 +2990,8 @@ void __init pmac_check_ht_link(void)
 	early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg);
 	early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq);
 	dump_HT_speeds("PCI-X HT Downlink", cfg, freq);
-#endif
 }
-
-#endif /* CONFIG_POWER4 */
+#endif /* 0 */
 
 /*
  * Early video resume hook
diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c
index 8c9b008c7226..4042e2f06ee0 100644
--- a/arch/powerpc/platforms/powermac/nvram.c
+++ b/arch/powerpc/platforms/powermac/nvram.c
@@ -47,7 +47,8 @@
 
 /* On Core99, nvram is either a sharp, a micron or an AMD flash */
 #define SM_FLASH_STATUS_DONE	0x80
-#define SM_FLASH_STATUS_ERR		0x38
+#define SM_FLASH_STATUS_ERR	0x38
+
 #define SM_FLASH_CMD_ERASE_CONFIRM	0xd0
 #define SM_FLASH_CMD_ERASE_SETUP	0x20
 #define SM_FLASH_CMD_RESET		0xff
@@ -75,11 +76,11 @@ struct core99_header {
  * Read and write the non-volatile RAM on PowerMacs and CHRP machines.
  */
 static int nvram_naddrs;
-static volatile unsigned char *nvram_addr;
 static volatile unsigned char *nvram_data;
-static int nvram_mult, is_core_99;
+static int is_core_99;
 static int core99_bank = 0;
 static int nvram_partitions[3];
+// XXX Turn that into a sem
 static DEFINE_SPINLOCK(nv_lock);
 
 extern int pmac_newworld;
@@ -105,6 +106,52 @@ static void core99_nvram_write_byte(int addr, unsigned char val)
 	nvram_image[addr] = val;
 }
 
+static ssize_t core99_nvram_read(char *buf, size_t count, loff_t *index)
+{
+	int i;
+
+	if (nvram_image == NULL)
+		return -ENODEV;
+	if (*index > NVRAM_SIZE)
+		return 0;
+
+	i = *index;
+	if (i + count > NVRAM_SIZE)
+		count = NVRAM_SIZE - i;
+
+	memcpy(buf, &nvram_image[i], count);
+	*index = i + count;
+	return count;
+}
+
+static ssize_t core99_nvram_write(char *buf, size_t count, loff_t *index)
+{
+	int i;
+
+	if (nvram_image == NULL)
+		return -ENODEV;
+	if (*index > NVRAM_SIZE)
+		return 0;
+
+	i = *index;
+	if (i + count > NVRAM_SIZE)
+		count = NVRAM_SIZE - i;
+
+	memcpy(&nvram_image[i], buf, count);
+	*index = i + count;
+	return count;
+}
+
+static ssize_t core99_nvram_size(void)
+{
+	if (nvram_image == NULL)
+		return -ENODEV;
+	return NVRAM_SIZE;
+}
+
+#ifdef CONFIG_PPC32
+static volatile unsigned char *nvram_addr;
+static int nvram_mult;
 
 static unsigned char direct_nvram_read_byte(int addr)
 {
@@ -181,7 +228,7 @@ static void pmu_nvram_write_byte(int addr, unsigned char val)
 }
 
 #endif /* CONFIG_ADB_PMU */
-
+#endif /* CONFIG_PPC32 */
 
 static u8 chrp_checksum(struct chrp_header* hdr)
 {
@@ -249,7 +296,7 @@ static int sm_erase_bank(int bank)
 	timeout = 0;
 	do {
 		if (++timeout > 1000000) {
-			printk(KERN_ERR "nvram: Sharp/Miron flash erase timeout !\n");
+			printk(KERN_ERR "nvram: Sharp/Micron flash erase timeout !\n");
 			break;
 		}
 		out_8(base, SM_FLASH_CMD_READ_STATUS);
@@ -411,7 +458,7 @@ static void __init lookup_partitions(void)
 		buffer[16] = 0;
 		do {
 			for (i=0;i<16;i++)
-				buffer[i] = nvram_read_byte(offset+i);
+				buffer[i] = ppc_md.nvram_read_val(offset+i);
 			if (!strcmp(hdr->name, "common"))
 				nvram_partitions[pmac_nvram_OF] = offset + 0x10;
 			if (!strcmp(hdr->name, "APL,MacOS75")) {
@@ -467,65 +514,76 @@ static void core99_nvram_sync(void)
 #endif
 }
 
-void __init pmac_nvram_init(void)
+static int __init core99_nvram_setup(struct device_node *dp)
+{
+	int i;
+	u32 gen_bank0, gen_bank1;
+
+	if (nvram_naddrs < 1) {
+		printk(KERN_ERR "nvram: no address\n");
+		return -EINVAL;
+	}
+	nvram_image = alloc_bootmem(NVRAM_SIZE);
+	if (nvram_image == NULL) {
+		printk(KERN_ERR "nvram: can't allocate ram image\n");
+		return -ENOMEM;
+	}
+	nvram_data = ioremap(dp->addrs[0].address, NVRAM_SIZE*2);
+	nvram_naddrs = 1; /* Make sure we get the correct case */
+
+	DBG("nvram: Checking bank 0...\n");
+
+	gen_bank0 = core99_check((u8 *)nvram_data);
+	gen_bank1 = core99_check((u8 *)nvram_data + NVRAM_SIZE);
+	core99_bank = (gen_bank0 < gen_bank1) ? 1 : 0;
+
+	DBG("nvram: gen0=%d, gen1=%d\n", gen_bank0, gen_bank1);
+	DBG("nvram: Active bank is: %d\n", core99_bank);
+
+	for (i=0; i<NVRAM_SIZE; i++)
+		nvram_image[i] = nvram_data[i + core99_bank*NVRAM_SIZE];
+
+	ppc_md.nvram_read_val	= core99_nvram_read_byte;
+	ppc_md.nvram_write_val	= core99_nvram_write_byte;
+	ppc_md.nvram_read	= core99_nvram_read;
+	ppc_md.nvram_write	= core99_nvram_write;
+	ppc_md.nvram_size	= core99_nvram_size;
+	ppc_md.nvram_sync	= core99_nvram_sync;
+	/* 
+	 * Maybe we could be smarter here though making an exclusive list
+	 * of known flash chips is a bit nasty as older OF didn't provide us
+	 * with a useful "compatible" entry. A solution would be to really
+	 * identify the chip using flash id commands and base ourselves on
+	 * a list of known chips IDs
+	 */
+	if (device_is_compatible(dp, "amd-0137")) {
+		core99_erase_bank = amd_erase_bank;
+		core99_write_bank = amd_write_bank;
+	} else {
+		core99_erase_bank = sm_erase_bank;
+		core99_write_bank = sm_write_bank;
+	}
+	return 0;
+}
+
+int __init pmac_nvram_init(void)
 {
 	struct device_node *dp;
+	int err = 0;
 
 	nvram_naddrs = 0;
 
 	dp = find_devices("nvram");
 	if (dp == NULL) {
 		printk(KERN_ERR "Can't find NVRAM device\n");
-		return;
+		return -ENODEV;
 	}
 	nvram_naddrs = dp->n_addrs;
 	is_core_99 = device_is_compatible(dp, "nvram,flash");
-	if (is_core_99) {
-		int i;
-		u32 gen_bank0, gen_bank1;
-
-		if (nvram_naddrs < 1) {
-			printk(KERN_ERR "nvram: no address\n");
-			return;
-		}
-		nvram_image = alloc_bootmem(NVRAM_SIZE);
-		if (nvram_image == NULL) {
-			printk(KERN_ERR "nvram: can't allocate ram image\n");
-			return;
-		}
-		nvram_data = ioremap(dp->addrs[0].address, NVRAM_SIZE*2);
-		nvram_naddrs = 1; /* Make sure we get the correct case */
-
-		DBG("nvram: Checking bank 0...\n");
-
-		gen_bank0 = core99_check((u8 *)nvram_data);
-		gen_bank1 = core99_check((u8 *)nvram_data + NVRAM_SIZE);
-		core99_bank = (gen_bank0 < gen_bank1) ? 1 : 0;
-
-		DBG("nvram: gen0=%d, gen1=%d\n", gen_bank0, gen_bank1);
-		DBG("nvram: Active bank is: %d\n", core99_bank);
-
-		for (i=0; i<NVRAM_SIZE; i++)
-			nvram_image[i] = nvram_data[i + core99_bank*NVRAM_SIZE];
-
-		ppc_md.nvram_read_val	= core99_nvram_read_byte;
-		ppc_md.nvram_write_val	= core99_nvram_write_byte;
-		ppc_md.nvram_sync	= core99_nvram_sync;
-		/* 
-		 * Maybe we could be smarter here though making an exclusive list
-		 * of known flash chips is a bit nasty as older OF didn't provide us
-		 * with a useful "compatible" entry. A solution would be to really
-		 * identify the chip using flash id commands and base ourselves on
-		 * a list of known chips IDs
-		 */
-		if (device_is_compatible(dp, "amd-0137")) {
-			core99_erase_bank = amd_erase_bank;
-			core99_write_bank = amd_write_bank;
-		} else {
-			core99_erase_bank = sm_erase_bank;
-			core99_write_bank = sm_write_bank;
-		}
-	} else if (_machine == _MACH_chrp && nvram_naddrs == 1) {
+	if (is_core_99)
+		err = core99_nvram_setup(dp);
+#ifdef CONFIG_PPC32
+	else if (_machine == _MACH_chrp && nvram_naddrs == 1) {
 		nvram_data = ioremap(dp->addrs[0].address + isa_mem_base,
 				     dp->addrs[0].size);
 		nvram_mult = 1;
@@ -547,11 +605,14 @@ void __init pmac_nvram_init(void)
 		ppc_md.nvram_read_val	= pmu_nvram_read_byte;
 		ppc_md.nvram_write_val	= pmu_nvram_write_byte;
 #endif /* CONFIG_ADB_PMU */
-	} else {
-		printk(KERN_ERR "Don't know how to access NVRAM with %d addresses\n",
-		       nvram_naddrs);
+	}
+#endif
+	else {
+		printk(KERN_ERR "Incompatible type of NVRAM\n");
+		return -ENXIO;
 	}
 	lookup_partitions();
+	return err;
 }
 
 int pmac_get_partition(int partition)
@@ -561,9 +622,9 @@ int pmac_get_partition(int partition)
 
 u8 pmac_xpram_read(int xpaddr)
 {
-	int offset = nvram_partitions[pmac_nvram_XPRAM];
+	int offset = pmac_get_partition(pmac_nvram_XPRAM);
 
-	if (offset < 0)
+	if (offset < 0 || xpaddr < 0 || xpaddr > 0x100)
 		return 0xff;
 
 	return ppc_md.nvram_read_val(xpaddr + offset);
@@ -571,9 +632,9 @@ u8 pmac_xpram_read(int xpaddr)
 
 void pmac_xpram_write(int xpaddr, u8 data)
 {
-	int offset = nvram_partitions[pmac_nvram_XPRAM];
+	int offset = pmac_get_partition(pmac_nvram_XPRAM);
 
-	if (offset < 0)
+	if (offset < 0 || xpaddr < 0 || xpaddr > 0x100)
 		return;
 
 	ppc_md.nvram_write_val(xpaddr + offset, data);
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 34dfe1e9706f..ebe22a2267d2 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -37,14 +37,14 @@
 #endif
 
 static int add_bridge(struct device_node *dev);
-extern void pmac_check_ht_link(void);
 
 /* XXX Could be per-controller, but I don't think we risk anything by
  * assuming we won't have both UniNorth and Bandit */
 static int has_uninorth;
-#ifdef CONFIG_POWER4
+#ifdef CONFIG_PPC64
 static struct pci_controller *u3_agp;
-#endif /* CONFIG_POWER4 */
+static struct pci_controller *u3_ht;
+#endif /* CONFIG_PPC64 */
 
 extern u8 pci_cache_line_size;
 extern int pcibios_assign_bus_offset;
@@ -229,6 +229,7 @@ static struct pci_ops macrisc_pci_ops =
 	macrisc_write_config
 };
 
+#ifdef CONFIG_PPC32
 /*
  * Verify that a specific (bus, dev_fn) exists on chaos
  */
@@ -282,7 +283,19 @@ static struct pci_ops chaos_pci_ops =
 	chaos_write_config
 };
 
-#ifdef CONFIG_POWER4
+static void __init setup_chaos(struct pci_controller *hose,
+			       struct reg_property *addr)
+{
+	/* assume a `chaos' bridge */
+	hose->ops = &chaos_pci_ops;
+	hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+	hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+}
+#else
+#define setup_chaos(hose, addr)
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
 /*
  * These versions of U3 HyperTransport config space access ops do not
  * implement self-view of the HT host yet
@@ -445,8 +458,9 @@ static struct pci_ops u3_ht_pci_ops =
 	u3_ht_read_config,
 	u3_ht_write_config
 };
-#endif /* CONFIG_POWER4 */
+#endif /* CONFIG_PPC64 */
 
+#ifdef CONFIG_PPC32
 /*
  * For a bandit bridge, turn on cache coherency if necessary.
  * N.B. we could clean this up using the hose ops directly.
@@ -487,7 +501,6 @@ static void __init init_bandit(struct pci_controller *bp)
 	printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n");
 }
 
-
 /*
  * Tweak the PCI-PCI bridge chip on the blue & white G3s.
  */
@@ -539,7 +552,7 @@ static void __init fixup_nec_usb2(void)
 		struct pci_controller *hose;
 		u32 data, *prop;
 		u8 bus, devfn;
-		
+
 		prop = (u32 *)get_property(nec, "vendor-id", NULL);
 		if (prop == NULL)
 			continue;
@@ -605,20 +618,18 @@ static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)
 	(void)in_le32(bp->cfg_data);
 }
 
-static int __init
-setup_uninorth(struct pci_controller* hose, struct reg_property* addr)
+void __init setup_grackle(struct pci_controller *hose)
 {
-	pci_assign_all_buses = 1;
-	has_uninorth = 1;
-	hose->ops = &macrisc_pci_ops;
-	hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
-	hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
-	/* We "know" that the bridge at f2000000 has the PCI slots. */
-	return addr->address == 0xf2000000;
+	setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
+	if (machine_is_compatible("AAPL,PowerBook1998"))
+		grackle_set_loop_snoop(hose, 1);
+#if 0	/* Disabled for now, HW problems ??? */
+	grackle_set_stg(hose, 1);
+#endif
 }
 
-static void __init
-setup_bandit(struct pci_controller* hose, struct reg_property* addr)
+static void __init setup_bandit(struct pci_controller *hose,
+				struct reg_property *addr)
 {
 	hose->ops = &macrisc_pci_ops;
 	hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
@@ -626,21 +637,25 @@ setup_bandit(struct pci_controller* hose, struct reg_property* addr)
 	init_bandit(hose);
 }
 
-static void __init
-setup_chaos(struct pci_controller* hose, struct reg_property* addr)
+static int __init setup_uninorth(struct pci_controller *hose,
+				 struct reg_property *addr)
 {
-	/* assume a `chaos' bridge */
-	hose->ops = &chaos_pci_ops;
+	pci_assign_all_buses = 1;
+	has_uninorth = 1;
+	hose->ops = &macrisc_pci_ops;
 	hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
 	hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+	/* We "know" that the bridge at f2000000 has the PCI slots. */
+	return addr->address == 0xf2000000;
 }
+#endif
 
-#ifdef CONFIG_POWER4
+#ifdef CONFIG_PPC64
 static void __init setup_u3_agp(struct pci_controller* hose)
 {
 	/* On G5, we move AGP up to high bus number so we don't need
 	 * to reassign bus numbers for HT. If we ever have P2P bridges
-	 * on AGP, we'll have to move pci_assign_all_buses to the
+	 * on AGP, we'll have to move pci_assign_all_busses to the
 	 * pci_controller structure so we enable it for AGP and not for
 	 * HT childs.
 	 * We hard code the address because of the different size of
@@ -679,8 +694,7 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 	 * then read its configuration register (if any).
 	 */
 	hose->io_base_phys = 0xf4000000;
-	hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000);
-	isa_io_base = pci_io_base = (unsigned long) hose->io_base_virt;
+	hose->pci_io_size = 0x00400000;
 	hose->io_resource.name = np->full_name;
 	hose->io_resource.start = 0;
 	hose->io_resource.end = 0x003fffff;
@@ -693,6 +707,8 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 	hose->mem_resources[0].end = 0xefffffff;
 	hose->mem_resources[0].flags = IORESOURCE_MEM;
 
+	u3_ht = hose;
+
 	if (u3_agp == NULL) {
 		DBG("U3 has no AGP, using full resource range\n");
 		return;
@@ -730,7 +746,7 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 			printk(KERN_WARNING "Running out of resources for /ht host !\n");
 			hose->mem_resources[cur].end = res->start - 1;
 			continue;
-		}		
+		}
 		cur++;
 		DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n",
 		    cur-1, res->start - 1, cur, res->end + 1);
@@ -742,126 +758,17 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 	}
 }
 
-#endif /* CONFIG_POWER4 */
-
-void __init
-setup_grackle(struct pci_controller *hose)
+/* XXX this needs to be converged between ppc32 and ppc64... */
+static struct pci_controller * __init pcibios_alloc_controller(void)
 {
-	setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
-	if (machine_is_compatible("AAPL,PowerBook1998"))
-		grackle_set_loop_snoop(hose, 1);
-#if 0	/* Disabled for now, HW problems ??? */
-	grackle_set_stg(hose, 1);
-#endif
-}
-
-static void __init pmac_process_bridge_OF_ranges(struct pci_controller *hose,
-			   struct device_node *dev, int primary)
-{
-	static unsigned int static_lc_ranges[2024];
-	unsigned int *dt_ranges, *lc_ranges, *ranges, *prev;
-	unsigned int size;
-	int rlen = 0, orig_rlen;
-	int memno = 0;
-	struct resource *res;
-	int np, na = prom_n_addr_cells(dev);
-
-	np = na + 5;
-
-	/* First we try to merge ranges to fix a problem with some pmacs
-	 * that can have more than 3 ranges, fortunately using contiguous
-	 * addresses -- BenH
-	 */
-	dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
-	if (!dt_ranges)
-		return;
-	/*	lc_ranges = alloc_bootmem(rlen);*/
-	lc_ranges = static_lc_ranges;
-	if (!lc_ranges)
-		return; /* what can we do here ? */
-	memcpy(lc_ranges, dt_ranges, rlen);
-	orig_rlen = rlen;
-
-	/* Let's work on a copy of the "ranges" property instead of damaging
-	 * the device-tree image in memory
-	 */
-	ranges = lc_ranges;
-	prev = NULL;
-	while ((rlen -= np * sizeof(unsigned int)) >= 0) {
-		if (prev) {
-			if (prev[0] == ranges[0] && prev[1] == ranges[1] &&
-				(prev[2] + prev[na+4]) == ranges[2] &&
-				(prev[na+2] + prev[na+4]) == ranges[na+2]) {
-				prev[na+4] += ranges[na+4];
-				ranges[0] = 0;
-				ranges += np;
-				continue;
-			}
-		}
-		prev = ranges;
-		ranges += np;
-	}
+	struct pci_controller *hose;
 
-	/*
-	 * The ranges property is laid out as an array of elements,
-	 * each of which comprises:
-	 *   cells 0 - 2:	a PCI address
-	 *   cells 3 or 3+4:	a CPU physical address
-	 *			(size depending on dev->n_addr_cells)
-	 *   cells 4+5 or 5+6:	the size of the range
-	 */
-	ranges = lc_ranges;
-	rlen = orig_rlen;
-	while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
-		res = NULL;
-		size = ranges[na+4];
-		switch (ranges[0] >> 24) {
-		case 1:		/* I/O space */
-			if (ranges[2] != 0)
-				break;
-			hose->io_base_phys = ranges[na+2];
-			/* limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
-			hose->io_base_virt = ioremap(ranges[na+2], size);
-			if (primary)
-				isa_io_base = (unsigned long) hose->io_base_virt;
-			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = ranges[2];
-			break;
-		case 2:		/* memory space */
-			memno = 0;
-			if (ranges[1] == 0 && ranges[2] == 0
-			    && ranges[na+4] <= (16 << 20)) {
-				/* 1st 16MB, i.e. ISA memory area */
-#if 0
-				if (primary)
-					isa_mem_base = ranges[na+2];
-#endif
-				memno = 1;
-			}
-			while (memno < 3 && hose->mem_resources[memno].flags)
-				++memno;
-			if (memno == 0)
-				hose->pci_mem_offset = ranges[na+2] - ranges[2];
-			if (memno < 3) {
-				res = &hose->mem_resources[memno];
-				res->flags = IORESOURCE_MEM;
-				res->start = ranges[na+2];
-			}
-			break;
-		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
-		ranges += np;
-	}
+	hose = alloc_bootmem(sizeof(struct pci_controller));
+	if (hose)
+		pci_setup_pci_controller(hose);
+	return hose;
 }
+#endif
 
 /*
  * We assume that if we have a G3 powermac, we have one bridge called
@@ -872,70 +779,78 @@ static int __init add_bridge(struct device_node *dev)
 {
 	int len;
 	struct pci_controller *hose;
+#ifdef CONFIG_PPC32
 	struct reg_property *addr;
-	char* disp_name;
+#endif
+	char *disp_name;
 	int *bus_range;
 	int primary = 1;
 
 	DBG("Adding PCI host bridge %s\n", dev->full_name);
 
-       	addr = (struct reg_property *) get_property(dev, "reg", &len);
-       	if (addr == NULL || len < sizeof(*addr)) {
-       		printk(KERN_WARNING "Can't use %s: no address\n",
-       		       dev->full_name);
-       		return -ENODEV;
-       	}
-       	bus_range = (int *) get_property(dev, "bus-range", &len);
-       	if (bus_range == NULL || len < 2 * sizeof(int)) {
-       		printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
-       			       dev->full_name);
-       	}
-
-       	hose = pcibios_alloc_controller();
-       	if (!hose)
-       		return -ENOMEM;
-       	hose->arch_data = dev;
-       	hose->first_busno = bus_range ? bus_range[0] : 0;
-       	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+#ifdef CONFIG_PPC32
+	/* XXX fix this */
+	addr = (struct reg_property *) get_property(dev, "reg", &len);
+	if (addr == NULL || len < sizeof(*addr)) {
+		printk(KERN_WARNING "Can't use %s: no address\n",
+		       dev->full_name);
+		return -ENODEV;
+	}
+#endif
+	bus_range = (int *) get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
+			       dev->full_name);
+	}
+
+	hose = pcibios_alloc_controller();
+	if (!hose)
+		return -ENOMEM;
+	hose->arch_data = dev;
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
 	disp_name = NULL;
 #ifdef CONFIG_POWER4
-       	if (device_is_compatible(dev, "u3-agp")) {
-       		setup_u3_agp(hose, addr);
-       		disp_name = "U3-AGP";
-       		primary = 0;
-       	} else if (device_is_compatible(dev, "u3-ht")) {
-       		setup_u3_ht(hose, addr);
-       		disp_name = "U3-HT";
-       		primary = 1;
-       	} else
-#endif /* CONFIG_POWER4 */
+	if (device_is_compatible(dev, "u3-agp")) {
+		setup_u3_agp(hose);
+		disp_name = "U3-AGP";
+		primary = 0;
+	} else if (device_is_compatible(dev, "u3-ht")) {
+		setup_u3_ht(hose);
+		disp_name = "U3-HT";
+		primary = 1;
+	}
+	printk(KERN_INFO "Found %s PCI host bridge.  Firmware bus number: %d->%d\n",
+		disp_name, hose->first_busno, hose->last_busno);
+#else
 	if (device_is_compatible(dev, "uni-north")) {
-       		primary = setup_uninorth(hose, addr);
-       		disp_name = "UniNorth";
+		primary = setup_uninorth(hose, addr);
+		disp_name = "UniNorth";
 	} else if (strcmp(dev->name, "pci") == 0) {
-       		/* XXX assume this is a mpc106 (grackle) */
-       		setup_grackle(hose);
-       		disp_name = "Grackle (MPC106)";
-       	} else if (strcmp(dev->name, "bandit") == 0) {
-       		setup_bandit(hose, addr);
-       		disp_name = "Bandit";
-       	} else if (strcmp(dev->name, "chaos") == 0) {
-       		setup_chaos(hose, addr);
-       		disp_name = "Chaos";
-       		primary = 0;
-       	}
-       	printk(KERN_INFO "Found %s PCI host bridge at 0x%08lx. Firmware bus number: %d->%d\n",
-       		disp_name, addr->address, hose->first_busno, hose->last_busno);
-       	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
-       		hose, hose->cfg_addr, hose->cfg_data);
-
-       	/* Interpret the "ranges" property */
-       	/* This also maps the I/O region and sets isa_io/mem_base */
-       	pci_process_bridge_OF_ranges(hose, dev, primary);
-
-       	/* Fixup "bus-range" OF property */
-       	fixup_bus_range(dev);
+		/* XXX assume this is a mpc106 (grackle) */
+		setup_grackle(hose);
+		disp_name = "Grackle (MPC106)";
+	} else if (strcmp(dev->name, "bandit") == 0) {
+		setup_bandit(hose, addr);
+		disp_name = "Bandit";
+	} else if (strcmp(dev->name, "chaos") == 0) {
+		setup_chaos(hose, addr);
+		disp_name = "Chaos";
+		primary = 0;
+	}
+	printk(KERN_INFO "Found %s PCI host bridge at 0x%08lx. Firmware bus number: %d->%d\n",
+		disp_name, addr->address, hose->first_busno, hose->last_busno);
+#endif
+	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+		hose, hose->cfg_addr, hose->cfg_data);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, primary);
+
+	/* Fixup "bus-range" OF property */
+	fixup_bus_range(dev);
 
 	return 0;
 }
@@ -968,14 +883,28 @@ pmac_pcibios_fixup(void)
 	pcibios_fixup_OF_interrupts();
 }
 
-void __init pmac_find_bridges(void)
+#ifdef CONFIG_PPC64
+static void __init pmac_fixup_phb_resources(void)
+{
+	struct pci_controller *hose, *tmp;
+
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n",
+		       hose->global_number,
+		       hose->io_resource.start, hose->io_resource.end);
+	}
+}
+#endif
+
+void __init pmac_pci_init(void)
 {
 	struct device_node *np, *root;
 	struct device_node *ht = NULL;
 
 	root = of_find_node_by_path("/");
 	if (root == NULL) {
-		printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n");
+		printk(KERN_CRIT "pmac_pci_init: can't find root "
+		       "of device tree\n");
 		return;
 	}
 	for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
@@ -994,22 +923,66 @@ void __init pmac_find_bridges(void)
 	}
 	of_node_put(root);
 
+#ifdef CONFIG_PPC64
 	/* Probe HT last as it relies on the agp resources to be already
 	 * setup
 	 */
 	if (ht && add_bridge(ht) != 0)
 		of_node_put(ht);
 
+	/*
+	 * We need to call pci_setup_phb_io for the HT bridge first
+	 * so it gets the I/O port numbers starting at 0, and we
+	 * need to call it for the AGP bridge after that so it gets
+	 * small positive I/O port numbers.
+	 */
+	if (u3_ht)
+		pci_setup_phb_io(u3_ht, 1);
+	if (u3_agp)
+		pci_setup_phb_io(u3_agp, 0);
+
+	/*
+	 * On ppc64, fixup the IO resources on our host bridges as
+	 * the common code does it only for children of the host bridges
+	 */
+	pmac_fixup_phb_resources();
+
+	/* Setup the linkage between OF nodes and PHBs */
+	pci_devs_phb_init();
+
+	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+	 * assume there is no P2P bridge on the AGP bus, which should be a
+	 * safe assumptions hopefully.
+	 */
+	if (u3_agp) {
+		struct device_node *np = u3_agp->arch_data;
+		PCI_DN(np)->busno = 0xf0;
+		for (np = np->child; np; np = np->sibling)
+			PCI_DN(np)->busno = 0xf0;
+	}
+
+	/* map in PCI I/O space */
+	phbs_remap_io();
+
+	/* pmac_check_ht_link(); */
+
+	/* Tell pci.c to not use the common resource allocation mechanism */
+	pci_probe_only = 1;
+
+	/* Allow all IO */
+	io_page_mask = -1;
+
+#else /* CONFIG_PPC64 */
 	init_p2pbridge();
 	fixup_nec_usb2();
-	
+
 	/* We are still having some issues with the Xserve G4, enabling
 	 * some offset between bus number and domains for now when we
 	 * assign all busses should help for now
 	 */
 	if (pci_assign_all_buses)
 		pcibios_assign_bus_offset = 0x10;
-
+#endif
 }
 
 int
@@ -1037,7 +1010,7 @@ pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
 
 	uninorth_child = node->parent &&
 		device_is_compatible(node->parent, "uni-north");
-	
+
 	/* Firewire & GMAC were disabled after PCI probe, the driver is
 	 * claiming them, we must re-enable them now.
 	 */
@@ -1057,7 +1030,7 @@ pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
 
 	if (updatecfg) {
 		u16 cmd;
-	
+
 		/*
 		 * Make sure PCI is correctly configured
 		 *
@@ -1069,10 +1042,12 @@ pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
 		 * register the device.
 		 */
 		pci_read_config_word(dev, PCI_COMMAND, &cmd);
-		cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
-    		pci_write_config_word(dev, PCI_COMMAND, cmd);
-    		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16);
-    		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, pci_cache_line_size);
+		cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+			| PCI_COMMAND_INVALIDATE;
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16);
+		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+				      L1_CACHE_BYTES >> 2);
 	}
 
 	return 0;
@@ -1081,8 +1056,7 @@ pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
 /* We power down some devices after they have been probed. They'll
  * be powered back on later on
  */
-void __init
-pmac_pcibios_after_init(void)
+void __init pmac_pcibios_after_init(void)
 {
 	struct device_node* nd;
 
@@ -1125,84 +1099,6 @@ pmac_pcibios_after_init(void)
 	}
 }
 
-#ifdef CONFIG_PPC64
-static void __init pmac_fixup_phb_resources(void)
-{
-	struct pci_controller *hose, *tmp;
-	
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base;
-		hose->io_resource.start += offset;
-		hose->io_resource.end += offset;
-		printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n",
-		       hose->global_number,
-		       hose->io_resource.start, hose->io_resource.end);
-	}
-}
-
-void __init pmac_pci_init(void)
-{
-	struct device_node *np, *root;
-	struct device_node *ht = NULL;
-
-	/* Probe root PCI hosts, that is on U3 the AGP host and the
-	 * HyperTransport host. That one is actually "kept" around
-	 * and actually added last as it's resource management relies
-	 * on the AGP resources to have been setup first
-	 */
-	root = of_find_node_by_path("/");
-	if (root == NULL) {
-		printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n");
-		return;
-	}
-	for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
-		if (np->name == NULL)
-			continue;
-		if (strcmp(np->name, "pci") == 0) {
-			if (add_bridge(np) == 0)
-				of_node_get(np);
-		}
-		if (strcmp(np->name, "ht") == 0) {
-			of_node_get(np);
-			ht = np;
-		}
-	}
-	of_node_put(root);
-
-	/* Now setup the HyperTransport host if we found any
-	 */
-	if (ht && add_bridge(ht) != 0)
-		of_node_put(ht);
-
-	/* Fixup the IO resources on our host bridges as the common code
-	 * does it only for childs of the host bridges
-	 */
-	pmac_fixup_phb_resources();
-
-	/* Setup the linkage between OF nodes and PHBs */ 
-	pci_devs_phb_init();
-
-	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
-	 * assume there is no P2P bridge on the AGP bus, which should be a
-	 * safe assumptions hopefully.
-	 */
-	if (u3_agp) {
-		struct device_node *np = u3_agp->arch_data;
-		PCI_DN(np)->busno = 0xf0;
-		for (np = np->child; np; np = np->sibling)
-			PCI_DN(np)->busno = 0xf0;
-	}
-
-	pmac_check_ht_link();
-
-	/* Tell pci.c to not use the common resource allocation mecanism */
-	pci_probe_only = 1;
-	
-	/* Allow all IO */
-	io_page_mask = -1;
-}
-#endif
-
 #ifdef CONFIG_PPC32
 void pmac_pci_fixup_cardbus(struct pci_dev* dev)
 {
@@ -1217,7 +1113,7 @@ void pmac_pci_fixup_cardbus(struct pci_dev* dev)
 	if (dev->device == PCI_DEVICE_ID_TI_1130 ||
 	    dev->device == PCI_DEVICE_ID_TI_1131) {
 		u8 val;
-	    	/* Enable PCI interrupt */
+		/* Enable PCI interrupt */
 		if (pci_read_config_byte(dev, 0x91, &val) == 0)
 			pci_write_config_byte(dev, 0x91, val | 0x30);
 		/* Disable ISA interrupt mode */
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 58017d18db70..0eca17df239e 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -430,7 +430,6 @@ void __init pmac_pic_init(void)
 
 		printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n",
 		       (unsigned int)irqctrler->addrs[0].address);
-		ppc_md.get_irq = mpic_get_irq;
 		pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0);
 
 		prom_get_irq_senses(senses, 0, 128);
@@ -483,6 +482,7 @@ void __init pmac_pic_init(void)
 	 * a Grand Central nor an OHare, then it's an Heathrow
 	 * (or Paddington).
 	 */
+	ppc_md.get_irq = pmac_get_irq;
 	if (find_devices("gc"))
 		level_mask[0] = GC_LEVEL_MASK;
 	else if (find_devices("ohare")) {
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index 0a9ba704865e..2ad25e13423e 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -19,7 +19,7 @@ extern int pmac_set_rtc_time(struct rtc_time *);
 extern void pmac_read_rtc_time(void);
 extern void pmac_calibrate_decr(void);
 extern void pmac_pcibios_fixup(void);
-extern void pmac_find_bridges(void);
+extern void pmac_pci_init(void);
 extern unsigned long pmac_ide_get_base(int index);
 extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
 	unsigned long data_port, unsigned long ctrl_port, int *irq);
@@ -41,7 +41,7 @@ extern unsigned long pmac_ide_get_base(int index);
 extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
 	unsigned long data_port, unsigned long ctrl_port, int *irq);
 
-extern void pmac_nvram_init(void);
+extern int pmac_nvram_init(void);
 
 extern struct hw_interrupt_type pmac_pic;
 
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 0bad53fa36ef..da0cb165dfc6 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -1,11 +1,11 @@
 /*
- *  arch/ppc/platforms/setup.c
+ *  Powermac setup and early boot code plus other random bits.
  *
  *  PowerPC version
  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
  *
  *  Adapted for Power Macintosh by Paul Mackerras
- *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
+ *    Copyright (C) 1996 Paul Mackerras (paulus@samba.org)
  *
  *  Derived from "arch/alpha/kernel/setup.c"
  *    Copyright (C) 1995 Linus Torvalds
@@ -65,13 +65,16 @@
 #include <asm/mediabay.h>
 #include <asm/machdep.h>
 #include <asm/dma.h>
-#include <asm/bootx.h>
 #include <asm/cputable.h>
 #include <asm/btext.h>
 #include <asm/pmac_feature.h>
 #include <asm/time.h>
 #include <asm/of_device.h>
 #include <asm/mmu_context.h>
+#include <asm/iommu.h>
+#include <asm/smu.h>
+#include <asm/pmc.h>
+#include <asm/mpic.h>
 
 #include "pmac.h"
 
@@ -88,16 +91,24 @@ int pmac_newworld = 1;
 static int current_root_goodness = -1;
 
 extern int pmac_newworld;
+extern struct machdep_calls pmac_md;
 
 #define DEFAULT_ROOT_DEVICE Root_SDA1	/* sda1 - slightly silly choice */
 
-extern void zs_kgdb_hook(int tty_num);
-static void ohare_init(void);
-#ifdef CONFIG_BOOTX_TEXT
-static void pmac_progress(char *s, unsigned short hex);
+#ifdef CONFIG_PPC64
+#include <asm/udbg.h>
+int sccdbg;
 #endif
 
+extern void zs_kgdb_hook(int tty_num);
+
 sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN;
+EXPORT_SYMBOL(sys_ctrler);
+
+#ifdef CONFIG_PMAC_SMU
+unsigned long smu_cmdbuf_abs;
+EXPORT_SYMBOL(smu_cmdbuf_abs);
+#endif
 
 #ifdef CONFIG_SMP
 extern struct smp_ops_t psurge_smp_ops;
@@ -191,44 +202,69 @@ static void pmac_show_percpuinfo(struct seq_file *m, int i)
 		return;
 	}
 #endif /* CONFIG_CPU_FREQ_PMAC */
+#ifdef CONFIG_PPC32
 	of_show_percpuinfo(m, i);
+#endif
 }
 
-static volatile u32 *sysctrl_regs;
+#ifndef CONFIG_ADB_CUDA
+int find_via_cuda(void)
+{
+	if (!find_devices("via-cuda"))
+		return 0;
+	printk("WARNING ! Your machine is CUDA-based but your kernel\n");
+	printk("          wasn't compiled with CONFIG_ADB_CUDA option !\n");
+	return 0;
+}
+#endif
 
-void __init
-pmac_setup_arch(void)
+#ifndef CONFIG_ADB_PMU
+int find_via_pmu(void)
 {
-	struct device_node *cpu;
-	int *fp;
-	unsigned long pvr;
+	if (!find_devices("via-pmu"))
+		return 0;
+	printk("WARNING ! Your machine is PMU-based but your kernel\n");
+	printk("          wasn't compiled with CONFIG_ADB_PMU option !\n");
+	return;
+}
+#endif
 
-	pvr = PVR_VER(mfspr(SPRN_PVR));
+#ifndef CONFIG_PMAC_SMU
+int smu_init(void)
+{
+	/* should check and warn if SMU is present */
+	return 0;
+}
+#endif
 
-	/* Set loops_per_jiffy to a half-way reasonable value,
-	   for use until calibrate_delay gets called. */
-	cpu = find_type_devices("cpu");
-	if (cpu != 0) {
-		fp = (int *) get_property(cpu, "clock-frequency", NULL);
-		if (fp != 0) {
-			if (pvr == 4 || pvr >= 8)
-				/* 604, G3, G4 etc. */
-				loops_per_jiffy = *fp / HZ;
-			else
-				/* 601, 603, etc. */
-				loops_per_jiffy = *fp / (2*HZ);
-		} else
-			loops_per_jiffy = 50000000 / HZ;
-	}
+#ifdef CONFIG_PPC32
+static volatile u32 *sysctrl_regs;
 
+static void __init ohare_init(void)
+{
 	/* this area has the CPU identification register
 	   and some registers used by smp boards */
 	sysctrl_regs = (volatile u32 *) ioremap(0xf8000000, 0x1000);
-	ohare_init();
 
-	/* Lookup PCI hosts */
-	pmac_find_bridges();
+	/*
+	 * Turn on the L2 cache.
+	 * We assume that we have a PSX memory controller iff
+	 * we have an ohare I/O controller.
+	 */
+	if (find_devices("ohare") != NULL) {
+		if (((sysctrl_regs[2] >> 24) & 0xf) >= 3) {
+			if (sysctrl_regs[4] & 0x10)
+				sysctrl_regs[4] |= 0x04000020;
+			else
+				sysctrl_regs[4] |= 0x04000000;
+			if(has_l2cache)
+				printk(KERN_INFO "Level 2 cache enabled\n");
+		}
+	}
+}
 
+static void __init l2cr_init(void)
+{
 	/* Checks "l2cr-value" property in the registry */
 	if (cpu_has_feature(CPU_FTR_L2CR)) {
 		struct device_node *np = find_devices("cpus");
@@ -247,68 +283,90 @@ pmac_setup_arch(void)
 	}
 
 	if (ppc_override_l2cr)
-		printk(KERN_INFO "L2CR overriden (0x%x), backside cache is %s\n",
-			ppc_override_l2cr_value, (ppc_override_l2cr_value & 0x80000000)
+		printk(KERN_INFO "L2CR overridden (0x%x), "
+		       "backside cache is %s\n",
+		       ppc_override_l2cr_value,
+		       (ppc_override_l2cr_value & 0x80000000)
 				? "enabled" : "disabled");
+}
+#endif
+
+void __init pmac_setup_arch(void)
+{
+	struct device_node *cpu;
+	int *fp;
+	unsigned long pvr;
+
+	pvr = PVR_VER(mfspr(SPRN_PVR));
+
+	/* Set loops_per_jiffy to a half-way reasonable value,
+	   for use until calibrate_delay gets called. */
+	loops_per_jiffy = 50000000 / HZ;
+	cpu = of_find_node_by_type(NULL, "cpu");
+	if (cpu != NULL) {
+		fp = (int *) get_property(cpu, "clock-frequency", NULL);
+		if (fp != NULL) {
+			if (pvr >= 0x30 && pvr < 0x80)
+				/* PPC970 etc. */
+				loops_per_jiffy = *fp / (3 * HZ);
+			else if (pvr == 4 || pvr >= 8)
+				/* 604, G3, G4 etc. */
+				loops_per_jiffy = *fp / HZ;
+			else
+				/* 601, 603, etc. */
+				loops_per_jiffy = *fp / (2 * HZ);
+		}
+		of_node_put(cpu);
+	}
+
+	/* Lookup PCI hosts */
+	pmac_pci_init();
+
+#ifdef CONFIG_PPC32
+	ohare_init();
+	l2cr_init();
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
+	/* Probe motherboard chipset */
+	/* this is done earlier in setup_arch for 32-bit */
+	pmac_feature_init();
+
+	/* We can NAP */
+	powersave_nap = 1;
+	printk(KERN_INFO "Using native/NAP idle loop\n");
+#endif
 
 #ifdef CONFIG_KGDB
 	zs_kgdb_hook(0);
 #endif
 
-#ifdef CONFIG_ADB_CUDA
 	find_via_cuda();
-#else
-	if (find_devices("via-cuda")) {
-		printk("WARNING ! Your machine is Cuda based but your kernel\n");
-		printk("          wasn't compiled with CONFIG_ADB_CUDA option !\n");
-	}
-#endif
-#ifdef CONFIG_ADB_PMU
 	find_via_pmu();
-#else
-	if (find_devices("via-pmu")) {
-		printk("WARNING ! Your machine is PMU based but your kernel\n");
-		printk("          wasn't compiled with CONFIG_ADB_PMU option !\n");
-	}
-#endif
+	smu_init();
+
 #ifdef CONFIG_NVRAM
 	pmac_nvram_init();
 #endif
+
+#ifdef CONFIG_PPC32
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start)
 		ROOT_DEV = Root_RAM0;
 	else
 #endif
 		ROOT_DEV = DEFAULT_ROOT_DEVICE;
+#endif
 
 #ifdef CONFIG_SMP
 	/* Check for Core99 */
 	if (find_devices("uni-n") || find_devices("u3"))
 		smp_ops = &core99_smp_ops;
+#ifdef CONFIG_PPC32
 	else
 		smp_ops = &psurge_smp_ops;
+#endif
 #endif /* CONFIG_SMP */
-
-	pci_create_OF_bus_map();
-}
-
-static void __init ohare_init(void)
-{
-	/*
-	 * Turn on the L2 cache.
-	 * We assume that we have a PSX memory controller iff
-	 * we have an ohare I/O controller.
-	 */
-	if (find_devices("ohare") != NULL) {
-		if (((sysctrl_regs[2] >> 24) & 0xf) >= 3) {
-			if (sysctrl_regs[4] & 0x10)
-				sysctrl_regs[4] |= 0x04000020;
-			else
-				sysctrl_regs[4] |= 0x04000000;
-			if(has_l2cache)
-				printk(KERN_INFO "Level 2 cache enabled\n");
-		}
-	}
 }
 
 char *bootpath;
@@ -319,8 +377,7 @@ int boot_part;
 extern dev_t boot_dev;
 
 #ifdef CONFIG_SCSI
-void __init
-note_scsi_host(struct device_node *node, void *host)
+void __init note_scsi_host(struct device_node *node, void *host)
 {
 	int l;
 	char *p;
@@ -351,8 +408,7 @@ EXPORT_SYMBOL(note_scsi_host);
 #endif
 
 #if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
-static dev_t __init
-find_ide_boot(void)
+static dev_t __init find_ide_boot(void)
 {
 	char *p;
 	int n;
@@ -369,15 +425,13 @@ find_ide_boot(void)
 }
 #endif /* CONFIG_BLK_DEV_IDE && CONFIG_BLK_DEV_IDE_PMAC */
 
-static void __init
-find_boot_device(void)
+static void __init find_boot_device(void)
 {
 #if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
 	boot_dev = find_ide_boot();
 #endif
 }
 
-static int initializing = 1;
 /* TODO: Merge the suspend-to-ram with the common code !!!
  * currently, this is a stub implementation for suspend-to-disk
  * only
@@ -428,6 +482,8 @@ static struct pm_ops pmac_pm_ops = {
 
 #endif /* CONFIG_SOFTWARE_SUSPEND */
 
+static int initializing = 1;
+
 static int pmac_late_init(void)
 {
 	initializing = 0;
@@ -440,8 +496,7 @@ static int pmac_late_init(void)
 late_initcall(pmac_late_init);
 
 /* can't be __init - can be called whenever a disk is first accessed */
-void
-note_bootable_part(dev_t dev, int part, int goodness)
+void note_bootable_part(dev_t dev, int part, int goodness)
 {
 	static int found_boot = 0;
 	char *p;
@@ -466,52 +521,68 @@ note_bootable_part(dev_t dev, int part, int goodness)
 	}
 }
 
-static void
-pmac_restart(char *cmd)
-{
 #ifdef CONFIG_ADB_CUDA
+static void cuda_restart(void)
+{
 	struct adb_request req;
-#endif /* CONFIG_ADB_CUDA */
 
+	cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_RESET_SYSTEM);
+	for (;;)
+		cuda_poll();
+}
+
+static void cuda_shutdown(void)
+{
+	struct adb_request req;
+
+	cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_POWERDOWN);
+	for (;;)
+		cuda_poll();
+}
+
+#else
+#define cuda_restart()
+#define cuda_shutdown()
+#endif
+
+#ifndef CONFIG_ADB_PMU
+#define pmu_restart()
+#define pmu_shutdown()
+#endif
+
+#ifndef CONFIG_PMAC_SMU
+#define smu_restart()
+#define smu_shutdown()
+#endif
+
+static void pmac_restart(char *cmd)
+{
 	switch (sys_ctrler) {
-#ifdef CONFIG_ADB_CUDA
 	case SYS_CTRLER_CUDA:
-		cuda_request(&req, NULL, 2, CUDA_PACKET,
-			     CUDA_RESET_SYSTEM);
-		for (;;)
-			cuda_poll();
+		cuda_restart();
 		break;
-#endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_ADB_PMU
 	case SYS_CTRLER_PMU:
 		pmu_restart();
 		break;
-#endif /* CONFIG_ADB_PMU */
+	case SYS_CTRLER_SMU:
+		smu_restart();
+		break;
 	default: ;
 	}
 }
 
-static void
-pmac_power_off(void)
+static void pmac_power_off(void)
 {
-#ifdef CONFIG_ADB_CUDA
-	struct adb_request req;
-#endif /* CONFIG_ADB_CUDA */
-
 	switch (sys_ctrler) {
-#ifdef CONFIG_ADB_CUDA
 	case SYS_CTRLER_CUDA:
-		cuda_request(&req, NULL, 2, CUDA_PACKET,
-			     CUDA_POWERDOWN);
-		for (;;)
-			cuda_poll();
+		cuda_shutdown();
 		break;
-#endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_ADB_PMU
 	case SYS_CTRLER_PMU:
 		pmu_shutdown();
 		break;
-#endif /* CONFIG_ADB_PMU */
+	case SYS_CTRLER_SMU:
+		smu_shutdown();
+		break;
 	default: ;
 	}
 }
@@ -522,37 +593,17 @@ pmac_halt(void)
 	pmac_power_off();
 }
 
+#ifdef CONFIG_PPC32
 void __init pmac_init(void)
 {
-	/* isa_io_base gets set in pmac_find_bridges */
+	/* isa_io_base gets set in pmac_pci_init */
 	isa_mem_base = PMAC_ISA_MEM_BASE;
 	pci_dram_offset = PMAC_PCI_DRAM_OFFSET;
 	ISA_DMA_THRESHOLD = ~0L;
 	DMA_MODE_READ = 1;
 	DMA_MODE_WRITE = 2;
 
-	ppc_md.setup_arch     = pmac_setup_arch;
-	ppc_md.show_cpuinfo   = pmac_show_cpuinfo;
-	ppc_md.show_percpuinfo = pmac_show_percpuinfo;
-	ppc_md.init_IRQ       = pmac_pic_init;
-	ppc_md.get_irq        = pmac_get_irq; /* Changed later on ... */
-
-	ppc_md.pcibios_fixup  = pmac_pcibios_fixup;
-	ppc_md.pcibios_enable_device_hook = pmac_pci_enable_device_hook;
-	ppc_md.pcibios_after_init = pmac_pcibios_after_init;
-	ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
-
-	ppc_md.restart        = pmac_restart;
-	ppc_md.power_off      = pmac_power_off;
-	ppc_md.halt           = pmac_halt;
-
-	ppc_md.time_init      = pmac_time_init;
-	ppc_md.set_rtc_time   = pmac_set_rtc_time;
-	ppc_md.get_rtc_time   = pmac_get_rtc_time;
-	ppc_md.get_boot_time  = pmac_get_boot_time;
-	ppc_md.calibrate_decr = pmac_calibrate_decr;
-
-	ppc_md.feature_call   = pmac_do_feature_call;
+	ppc_md = pmac_md;
 
 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
 #ifdef CONFIG_BLK_DEV_IDE_PMAC
@@ -561,27 +612,62 @@ void __init pmac_init(void)
 #endif /* CONFIG_BLK_DEV_IDE_PMAC */
 #endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
 
-#ifdef CONFIG_BOOTX_TEXT
-	ppc_md.progress = pmac_progress;
-#endif /* CONFIG_BOOTX_TEXT */
-
 	if (ppc_md.progress) ppc_md.progress("pmac_init(): exit", 0);
 
 }
+#endif
 
-#ifdef CONFIG_BOOTX_TEXT
-static void __init
-pmac_progress(char *s, unsigned short hex)
+/* 
+ * Early initialization.
+ */
+static void __init pmac_init_early(void)
+{
+#ifdef CONFIG_PPC64
+	/* Initialize hash table, from now on, we can take hash faults
+	 * and call ioremap
+	 */
+	hpte_init_native();
+
+	/* Init SCC */
+	if (strstr(cmd_line, "sccdbg")) {
+		sccdbg = 1;
+		udbg_init_scc(NULL);
+	}
+
+	/* Setup interrupt mapping options */
+	ppc64_interrupt_controller = IC_OPEN_PIC;
+
+	iommu_init_early_u3();
+#endif
+}
+
+static void __init pmac_progress(char *s, unsigned short hex)
 {
+#ifdef CONFIG_PPC64
+	if (sccdbg) {
+		udbg_puts(s);
+		udbg_puts("\n");
+		return;
+	}
+#endif
+#ifdef CONFIG_BOOTX_TEXT
 	if (boot_text_mapped) {
 		btext_drawstring(s);
 		btext_drawchar('\n');
 	}
-}
 #endif /* CONFIG_BOOTX_TEXT */
+}
 
-static int __init
-pmac_declare_of_platform_devices(void)
+/*
+ * pmac has no legacy IO, anything calling this function has to
+ * fail or bad things will happen
+ */
+static int pmac_check_legacy_ioport(unsigned int baseport)
+{
+	return -ENODEV;
+}
+
+static int __init pmac_declare_of_platform_devices(void)
 {
 	struct device_node *np;
 
@@ -594,6 +680,13 @@ pmac_declare_of_platform_devices(void)
 				break;
 			}
 	}
+	np = find_devices("valkyrie");
+	if (np)
+		of_platform_device_create(np, "valkyrie", NULL);
+	np = find_devices("platinum");
+	if (np)
+		of_platform_device_create(np, "platinum", NULL);
+
 	np = find_devices("u3");
 	if (np) {
 		for (np = np->child; np != NULL; np = np->sibling)
@@ -603,15 +696,92 @@ pmac_declare_of_platform_devices(void)
 				break;
 			}
 	}
-
-	np = find_devices("valkyrie");
-	if (np)
-		of_platform_device_create(np, "valkyrie", NULL);
-	np = find_devices("platinum");
-	if (np)
-		of_platform_device_create(np, "platinum", NULL);
+        np = of_find_node_by_type(NULL, "smu");
+        if (np) {
+		of_platform_device_create(np, "smu", NULL);
+		of_node_put(np);
+	}
 
 	return 0;
 }
 
 device_initcall(pmac_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init pmac_probe(int platform)
+{
+#ifdef CONFIG_PPC64
+	if (platform != PLATFORM_POWERMAC)
+		return 0;
+
+	/*
+	 * On U3, the DART (iommu) must be allocated now since it
+	 * has an impact on htab_initialize (due to the large page it
+	 * occupies having to be broken up so the DART itself is not
+	 * part of the cacheable linar mapping
+	 */
+	alloc_u3_dart_table();
+#endif
+
+#ifdef CONFIG_PMAC_SMU
+	/*
+	 * SMU based G5s need some memory below 2Gb, at least the current
+	 * driver needs that. We have to allocate it now. We allocate 4k
+	 * (1 small page) for now.
+	 */
+	smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL);
+#endif /* CONFIG_PMAC_SMU */
+
+	return 1;
+}
+
+#ifdef CONFIG_PPC64
+static int pmac_probe_mode(struct pci_bus *bus)
+{
+	struct device_node *node = bus->sysdata;
+
+	/* We need to use normal PCI probing for the AGP bus,
+	   since the device for the AGP bridge isn't in the tree. */
+	if (bus->self == NULL && device_is_compatible(node, "u3-agp"))
+		return PCI_PROBE_NORMAL;
+
+	return PCI_PROBE_DEVTREE;
+}
+#endif
+
+struct machdep_calls __initdata pmac_md = {
+#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
+	.cpu_die		= generic_mach_cpu_die,
+#endif
+	.probe			= pmac_probe,
+	.setup_arch		= pmac_setup_arch,
+	.init_early		= pmac_init_early,
+	.show_cpuinfo		= pmac_show_cpuinfo,
+	.show_percpuinfo	= pmac_show_percpuinfo,
+	.init_IRQ		= pmac_pic_init,
+	.get_irq		= mpic_get_irq,	/* changed later */
+	.pcibios_fixup		= pmac_pcibios_fixup,
+	.restart		= pmac_restart,
+	.power_off		= pmac_power_off,
+	.halt			= pmac_halt,
+	.time_init		= pmac_time_init,
+	.get_boot_time		= pmac_get_boot_time,
+	.set_rtc_time		= pmac_set_rtc_time,
+	.get_rtc_time		= pmac_get_rtc_time,
+	.calibrate_decr		= pmac_calibrate_decr,
+	.feature_call		= pmac_do_feature_call,
+	.check_legacy_ioport	= pmac_check_legacy_ioport,
+	.progress		= pmac_progress,
+#ifdef CONFIG_PPC64
+	.pci_probe_mode		= pmac_probe_mode,
+	.idle_loop		= native_idle,
+	.enable_pmcs		= power4_enable_pmcs,
+#endif
+#ifdef CONFIG_PPC32
+	.pcibios_enable_device_hook = pmac_pci_enable_device_hook,
+	.pcibios_after_init	= pmac_pcibios_after_init,
+	.phys_mem_access_prot	= pci_phys_mem_access_prot,
+#endif
+};
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index ccaa0534d60f..e1f9443cc872 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -44,20 +44,33 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/smp.h>
-#include <asm/residual.h>
 #include <asm/machdep.h>
 #include <asm/pmac_feature.h>
 #include <asm/time.h>
 #include <asm/mpic.h>
 #include <asm/cacheflush.h>
 #include <asm/keylargo.h>
+#include <asm/pmac_low_i2c.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+extern void __secondary_start_pmac_0(void);
+
+#ifdef CONFIG_PPC32
+
+/* Sync flag for HW tb sync */
+static volatile int sec_tb_reset = 0;
 
 /*
  * Powersurge (old powermac SMP) support.
  */
 
-extern void __secondary_start_pmac_0(void);
-
 /* Addresses for powersurge registers */
 #define HAMMERHEAD_BASE		0xf8000000
 #define HHEAD_CONFIG		0x90
@@ -106,47 +119,6 @@ static volatile u32 __iomem *psurge_start;
 /* what sort of powersurge board we have */
 static int psurge_type = PSURGE_NONE;
 
-/* L2 and L3 cache settings to pass from CPU0 to CPU1 */
-volatile static long int core99_l2_cache;
-volatile static long int core99_l3_cache;
-
-/* Timebase freeze GPIO */
-static unsigned int core99_tb_gpio;
-
-/* Sync flag for HW tb sync */
-static volatile int sec_tb_reset = 0;
-static unsigned int pri_tb_hi, pri_tb_lo;
-static unsigned int pri_tb_stamp;
-
-static void __devinit core99_init_caches(int cpu)
-{
-	if (!cpu_has_feature(CPU_FTR_L2CR))
-		return;
-
-	if (cpu == 0) {
-		core99_l2_cache = _get_L2CR();
-		printk("CPU0: L2CR is %lx\n", core99_l2_cache);
-	} else {
-		printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
-		_set_L2CR(0);
-		_set_L2CR(core99_l2_cache);
-		printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
-	}
-
-	if (!cpu_has_feature(CPU_FTR_L3CR))
-		return;
-
-	if (cpu == 0){
-		core99_l3_cache = _get_L3CR();
-		printk("CPU0: L3CR is %lx\n", core99_l3_cache);
-	} else {
-		printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
-		_set_L3CR(0);
-		_set_L3CR(core99_l3_cache);
-		printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
-	}
-}
-
 /*
  * Set and clear IPIs for powersurge.
  */
@@ -436,151 +408,188 @@ void __init smp_psurge_give_timebase(void)
 	/* Dummy implementation */
 }
 
-static int __init smp_core99_probe(void)
-{
-#ifdef CONFIG_6xx
-	extern int powersave_nap;
-#endif
-	struct device_node *cpus, *firstcpu;
-	int i, ncpus = 0, boot_cpu = -1;
-	u32 *tbprop = NULL;
-
-	if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
-	cpus = firstcpu = find_type_devices("cpu");
-	while(cpus != NULL) {
-		u32 *regprop = (u32 *)get_property(cpus, "reg", NULL);
-		char *stateprop = (char *)get_property(cpus, "state", NULL);
-		if (regprop != NULL && stateprop != NULL &&
-		    !strncmp(stateprop, "running", 7))
-			boot_cpu = *regprop;
-		++ncpus;
-		cpus = cpus->next;
-	}
-	if (boot_cpu == -1)
-		printk(KERN_WARNING "Couldn't detect boot CPU !\n");
-	if (boot_cpu != 0)
-		printk(KERN_WARNING "Boot CPU is %d, unsupported setup !\n", boot_cpu);
+/* PowerSurge-style Macs */
+struct smp_ops_t psurge_smp_ops = {
+	.message_pass	= smp_psurge_message_pass,
+	.probe		= smp_psurge_probe,
+	.kick_cpu	= smp_psurge_kick_cpu,
+	.setup_cpu	= smp_psurge_setup_cpu,
+	.give_timebase	= smp_psurge_give_timebase,
+	.take_timebase	= smp_psurge_take_timebase,
+};
+#endif /* CONFIG_PPC32 - actually powersurge support */
 
-	if (machine_is_compatible("MacRISC4")) {
-		extern struct smp_ops_t core99_smp_ops;
+#ifdef CONFIG_PPC64
+/*
+ * G5s enable/disable the timebase via an i2c-connected clock chip.
+ */
+static struct device_node *pmac_tb_clock_chip_host;
+static u8 pmac_tb_pulsar_addr;
+static void (*pmac_tb_freeze)(int freeze);
+static DEFINE_SPINLOCK(timebase_lock);
+static unsigned long timebase;
 
-		core99_smp_ops.take_timebase = smp_generic_take_timebase;
-		core99_smp_ops.give_timebase = smp_generic_give_timebase;
-	} else {
-		if (firstcpu != NULL)
-			tbprop = (u32 *)get_property(firstcpu, "timebase-enable", NULL);
-		if (tbprop)
-			core99_tb_gpio = *tbprop;
-		else
-			core99_tb_gpio = KL_GPIO_TB_ENABLE;
-	}
+static void smp_core99_cypress_tb_freeze(int freeze)
+{
+	u8 data;
+	int rc;
 
-	if (ncpus > 1) {
-		mpic_request_ipis();
-		for (i = 1; i < ncpus; ++i)
-			smp_hw_index[i] = i;
-#ifdef CONFIG_6xx
-		powersave_nap = 0;
-#endif
-		core99_init_caches(0);
+	/* Strangely, the device-tree says address is 0xd2, but darwin
+	 * accesses 0xd0 ...
+	 */
+	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
+	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
+			       0xd0 | pmac_low_i2c_read,
+			       0x81, &data, 1);
+	if (rc != 0)
+		goto bail;
+
+	data = (data & 0xf3) | (freeze ? 0x00 : 0x0c);
+
+       	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
+	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
+			       0xd0 | pmac_low_i2c_write,
+			       0x81, &data, 1);
+
+ bail:
+	if (rc != 0) {
+		printk("Cypress Timebase %s rc: %d\n",
+		       freeze ? "freeze" : "unfreeze", rc);
+		panic("Timebase freeze failed !\n");
 	}
-
-	return ncpus;
 }
 
-static void __devinit smp_core99_kick_cpu(int nr)
-{
-	unsigned long save_vector, new_vector;
-	unsigned long flags;
 
-	volatile unsigned long *vector
-		 = ((volatile unsigned long *)(KERNELBASE+0x100));
-	if (nr < 0 || nr > 3)
-		return;
-	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
+static void smp_core99_pulsar_tb_freeze(int freeze)
+{
+	u8 data;
+	int rc;
+
+	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
+	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
+			       pmac_tb_pulsar_addr | pmac_low_i2c_read,
+			       0x2e, &data, 1);
+	if (rc != 0)
+		goto bail;
+
+	data = (data & 0x88) | (freeze ? 0x11 : 0x22);
+
+	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
+	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
+			       pmac_tb_pulsar_addr | pmac_low_i2c_write,
+			       0x2e, &data, 1);
+ bail:
+	if (rc != 0) {
+		printk(KERN_ERR "Pulsar Timebase %s rc: %d\n",
+		       freeze ? "freeze" : "unfreeze", rc);
+		panic("Timebase freeze failed !\n");
+	}
+}
 
-	local_irq_save(flags);
-	local_irq_disable();
 
-	/* Save reset vector */
-	save_vector = *vector;
+static void smp_core99_give_timebase(void)
+{
+	/* Open i2c bus for synchronous access */
+	if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0))
+		panic("Can't open i2c for TB sync !\n");
 
-	/* Setup fake reset vector that does	
-	 *   b __secondary_start_pmac_0 + nr*8 - KERNELBASE
-	 */
-	new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8;
-	*vector = 0x48000002 + new_vector - KERNELBASE;
+	spin_lock(&timebase_lock);
+	(*pmac_tb_freeze)(1);
+	mb();
+	timebase = get_tb();
+	spin_unlock(&timebase_lock);
 
-	/* flush data cache and inval instruction cache */
-	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+	while (timebase)
+		barrier();
 
-	/* Put some life in our friend */
-	pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
+	spin_lock(&timebase_lock);
+	(*pmac_tb_freeze)(0);
+	spin_unlock(&timebase_lock);
 
-	/* FIXME: We wait a bit for the CPU to take the exception, I should
-	 * instead wait for the entry code to set something for me. Well,
-	 * ideally, all that crap will be done in prom.c and the CPU left
-	 * in a RAM-based wait loop like CHRP.
-	 */
-	mdelay(1);
+	/* Close i2c bus */
+	pmac_low_i2c_close(pmac_tb_clock_chip_host);
+}
 
-	/* Restore our exception vector */
-	*vector = save_vector;
-	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
 
-	local_irq_restore(flags);
-	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
+static void __devinit smp_core99_take_timebase(void)
+{
+	while (!timebase)
+		barrier();
+	spin_lock(&timebase_lock);
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	spin_unlock(&timebase_lock);
 }
 
-static void __devinit smp_core99_setup_cpu(int cpu_nr)
+static void __init smp_core99_setup(int ncpus)
 {
-	/* Setup L2/L3 */
-	if (cpu_nr != 0)
-		core99_init_caches(cpu_nr);
+	struct device_node *cc = NULL;	
+	struct device_node *p;
+	u32 *reg;
+	int ok;
+
+	/* HW sync only on these platforms */
+	if (!machine_is_compatible("PowerMac7,2") &&
+	    !machine_is_compatible("PowerMac7,3") &&
+	    !machine_is_compatible("RackMac3,1"))
+		return;
 
-	/* Setup openpic */
-	mpic_setup_this_cpu();
+	/* Look for the clock chip */
+	while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) {
+		p = of_get_parent(cc);
+		ok = p && device_is_compatible(p, "uni-n-i2c");
+		of_node_put(p);
+		if (!ok)
+			continue;
 
-	if (cpu_nr == 0) {
-#ifdef CONFIG_POWER4
-		extern void g5_phy_disable_cpu1(void);
+		reg = (u32 *)get_property(cc, "reg", NULL);
+		if (reg == NULL)
+			continue;
 
-		/* If we didn't start the second CPU, we must take
-		 * it off the bus
-		 */
-		if (machine_is_compatible("MacRISC4") &&
-		    num_online_cpus() < 2)		
-			g5_phy_disable_cpu1();
-#endif /* CONFIG_POWER4 */
-		if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349);
+		switch (*reg) {
+		case 0xd2:
+			if (device_is_compatible(cc, "pulsar-legacy-slewing")) {
+				pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+				pmac_tb_pulsar_addr = 0xd2;
+				printk(KERN_INFO "Timebase clock is Pulsar chip\n");
+			} else if (device_is_compatible(cc, "cy28508")) {
+				pmac_tb_freeze = smp_core99_cypress_tb_freeze;
+				printk(KERN_INFO "Timebase clock is Cypress chip\n");
+			}
+			break;
+		case 0xd4:
+			pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+			pmac_tb_pulsar_addr = 0xd4;
+			printk(KERN_INFO "Timebase clock is Pulsar chip\n");
+			break;
+		}
+		if (pmac_tb_freeze != NULL) {
+			pmac_tb_clock_chip_host = of_get_parent(cc);
+			of_node_put(cc);
+			break;
+		}
+	}
+	if (pmac_tb_freeze == NULL) {
+		smp_ops->give_timebase = smp_generic_give_timebase;
+		smp_ops->take_timebase = smp_generic_take_timebase;
 	}
 }
 
-/* not __init, called in sleep/wakeup code */
-void smp_core99_take_timebase(void)
+/* nothing to do here, caches are already set up by service processor */
+static inline void __devinit core99_init_caches(int cpu)
 {
-	unsigned long flags;
+}
 
-	/* tell the primary we're here */
-	sec_tb_reset = 1;
-	mb();
+#else /* CONFIG_PPC64 */
 
-	/* wait for the primary to set pri_tb_hi/lo */
-	while (sec_tb_reset < 2)
-		mb();
+/*
+ * SMP G4 powermacs use a GPIO to enable/disable the timebase.
+ */
 
-	/* set our stuff the same as the primary */
-	local_irq_save(flags);
-	set_dec(1);
-	set_tb(pri_tb_hi, pri_tb_lo);
-	last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp;
-	mb();
+static unsigned int core99_tb_gpio;	/* Timebase freeze GPIO */
 
-	/* tell the primary we're done */
-       	sec_tb_reset = 0;
-	mb();
-	local_irq_restore(flags);
-}
+static unsigned int pri_tb_hi, pri_tb_lo;
+static unsigned int pri_tb_stamp;
 
 /* not __init, called in sleep/wakeup code */
 void smp_core99_give_timebase(void)
@@ -626,43 +635,184 @@ void smp_core99_give_timebase(void)
 	local_irq_restore(flags);
 }
 
-void smp_core99_message_pass(int target, int msg)
+/* not __init, called in sleep/wakeup code */
+void smp_core99_take_timebase(void)
+{
+	unsigned long flags;
+
+	/* tell the primary we're here */
+	sec_tb_reset = 1;
+	mb();
+
+	/* wait for the primary to set pri_tb_hi/lo */
+	while (sec_tb_reset < 2)
+		mb();
+
+	/* set our stuff the same as the primary */
+	local_irq_save(flags);
+	set_dec(1);
+	set_tb(pri_tb_hi, pri_tb_lo);
+	last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp;
+	mb();
+
+	/* tell the primary we're done */
+       	sec_tb_reset = 0;
+	mb();
+	local_irq_restore(flags);
+}
+
+/* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */
+volatile static long int core99_l2_cache;
+volatile static long int core99_l3_cache;
+
+static void __devinit core99_init_caches(int cpu)
 {
-	cpumask_t mask = CPU_MASK_ALL;
-	/* make sure we're sending something that translates to an IPI */
-	if (msg > 0x3) {
-		printk("SMP %d: smp_message_pass: unknown msg %d\n",
-		       smp_processor_id(), msg);
+	if (!cpu_has_feature(CPU_FTR_L2CR))
 		return;
+
+	if (cpu == 0) {
+		core99_l2_cache = _get_L2CR();
+		printk("CPU0: L2CR is %lx\n", core99_l2_cache);
+	} else {
+		printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
+		_set_L2CR(0);
+		_set_L2CR(core99_l2_cache);
+		printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
 	}
-	switch (target) {
-	case MSG_ALL:
-		mpic_send_ipi(msg, cpus_addr(mask)[0]);
-		break;
-	case MSG_ALL_BUT_SELF:
-		cpu_clear(smp_processor_id(), mask);
-		mpic_send_ipi(msg, cpus_addr(mask)[0]);
-		break;
-	default:
-		mpic_send_ipi(msg, 1 << target);
-		break;
+
+	if (!cpu_has_feature(CPU_FTR_L3CR))
+		return;
+
+	if (cpu == 0){
+		core99_l3_cache = _get_L3CR();
+		printk("CPU0: L3CR is %lx\n", core99_l3_cache);
+	} else {
+		printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
+		_set_L3CR(0);
+		_set_L3CR(core99_l3_cache);
+		printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
 	}
 }
 
+static void __init smp_core99_setup(int ncpus)
+{
+	struct device_node *cpu;
+	u32 *tbprop = NULL;
+	int i;
+
+	core99_tb_gpio = KL_GPIO_TB_ENABLE;	/* default value */
+	cpu = of_find_node_by_type(NULL, "cpu");
+	if (cpu != NULL) {
+		tbprop = (u32 *)get_property(cpu, "timebase-enable", NULL);
+		if (tbprop)
+			core99_tb_gpio = *tbprop;
+		of_node_put(cpu);
+	}
+
+	/* XXX should get this from reg properties */
+	for (i = 1; i < ncpus; ++i)
+		smp_hw_index[i] = i;
+	powersave_nap = 0;
+}
+#endif
+
+static int __init smp_core99_probe(void)
+{
+	struct device_node *cpus;
+	int ncpus = 0;
+
+	if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
+
+	/* Count CPUs in the device-tree */
+       	for (cpus = NULL; (cpus = of_find_node_by_type(cpus, "cpu")) != NULL;)
+	       	++ncpus;
+
+	printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus);
+
+	/* Nothing more to do if less than 2 of them */
+	if (ncpus <= 1)
+		return 1;
+
+	smp_core99_setup(ncpus);
+	mpic_request_ipis();
+	core99_init_caches(0);
+
+	return ncpus;
+}
+
+static void __devinit smp_core99_kick_cpu(int nr)
+{
+	unsigned int save_vector;
+	unsigned long new_vector;
+	unsigned long flags;
+	volatile unsigned int *vector
+		 = ((volatile unsigned int *)(KERNELBASE+0x100));
+
+	if (nr < 0 || nr > 3)
+		return;
+	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
+
+	local_irq_save(flags);
+	local_irq_disable();
+
+	/* Save reset vector */
+	save_vector = *vector;
+
+	/* Setup fake reset vector that does	
+	 *   b __secondary_start_pmac_0 + nr*8 - KERNELBASE
+	 */
+	new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8;
+	*vector = 0x48000002 + new_vector - KERNELBASE;
+
+	/* flush data cache and inval instruction cache */
+	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+	/* Put some life in our friend */
+	pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
+
+	/* FIXME: We wait a bit for the CPU to take the exception, I should
+	 * instead wait for the entry code to set something for me. Well,
+	 * ideally, all that crap will be done in prom.c and the CPU left
+	 * in a RAM-based wait loop like CHRP.
+	 */
+	mdelay(1);
+
+	/* Restore our exception vector */
+	*vector = save_vector;
+	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+	local_irq_restore(flags);
+	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
+}
+
+static void __devinit smp_core99_setup_cpu(int cpu_nr)
+{
+	/* Setup L2/L3 */
+	if (cpu_nr != 0)
+		core99_init_caches(cpu_nr);
+
+	/* Setup openpic */
+	mpic_setup_this_cpu();
+
+	if (cpu_nr == 0) {
+#ifdef CONFIG_POWER4
+		extern void g5_phy_disable_cpu1(void);
+
+		/* If we didn't start the second CPU, we must take
+		 * it off the bus
+		 */
+		if (machine_is_compatible("MacRISC4") &&
+		    num_online_cpus() < 2)		
+			g5_phy_disable_cpu1();
+#endif /* CONFIG_POWER4 */
+		if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349);
+	}
+}
 
-/* PowerSurge-style Macs */
-struct smp_ops_t psurge_smp_ops = {
-	.message_pass	= smp_psurge_message_pass,
-	.probe		= smp_psurge_probe,
-	.kick_cpu	= smp_psurge_kick_cpu,
-	.setup_cpu	= smp_psurge_setup_cpu,
-	.give_timebase	= smp_psurge_give_timebase,
-	.take_timebase	= smp_psurge_take_timebase,
-};
 
-/* Core99 Macs (dual G4s) */
+/* Core99 Macs (dual G4s and G5s) */
 struct smp_ops_t core99_smp_ops = {
-	.message_pass	= smp_core99_message_pass,
+	.message_pass	= smp_mpic_message_pass,
 	.probe		= smp_core99_probe,
 	.kick_cpu	= smp_core99_kick_cpu,
 	.setup_cpu	= smp_core99_setup_cpu,
@@ -670,7 +820,7 @@ struct smp_ops_t core99_smp_ops = {
 	.take_timebase	= smp_core99_take_timebase,
 };
 
-#ifdef CONFIG_HOTPLUG_CPU
+#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
 
 int __cpu_disable(void)
 {
@@ -685,7 +835,7 @@ int __cpu_disable(void)
 	return 0;
 }
 
-extern void low_cpu_die(void) __attribute__((noreturn)); /* in pmac_sleep.S */
+extern void low_cpu_die(void) __attribute__((noreturn)); /* in sleep.S */
 static int cpu_dead[NR_CPUS];
 
 void cpu_die(void)
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index a6d2d231d5a0..82982bf6453c 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -33,6 +33,7 @@
 #include <asm/machdep.h>
 #include <asm/time.h>
 #include <asm/nvram.h>
+#include <asm/smu.h>
 
 #undef DEBUG
 
@@ -68,8 +69,8 @@
 
 long __init pmac_time_init(void)
 {
-#ifdef CONFIG_NVRAM
 	s32 delta = 0;
+#ifdef CONFIG_NVRAM
 	int dst;
 	
 	delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
@@ -80,110 +81,181 @@ long __init pmac_time_init(void)
 	dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
 	printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
 		dst ? "on" : "off");
-	return delta;
-#else
-	return 0;
 #endif
+	return delta;
 }
 
-unsigned long pmac_get_boot_time(void)
+static void to_rtc_time(unsigned long now, struct rtc_time *tm)
+{
+	to_tm(now, tm);
+	tm->tm_year -= 1900;
+	tm->tm_mon -= 1;
+}
+
+static unsigned long from_rtc_time(struct rtc_time *tm)
+{
+	return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
+		      tm->tm_hour, tm->tm_min, tm->tm_sec);
+}
+
+#ifdef CONFIG_ADB_CUDA
+static unsigned long cuda_get_time(void)
 {
-#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
 	struct adb_request req;
 	unsigned long now;
-#endif
 
-	/* Get the time from the RTC */
-	switch (sys_ctrler) {
-#ifdef CONFIG_ADB_CUDA
-	case SYS_CTRLER_CUDA:
-		if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
-			return 0;
-		while (!req.complete)
-			cuda_poll();
-		if (req.reply_len != 7)
-			printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n",
-			       req.reply_len);
-		now = (req.reply[3] << 24) + (req.reply[4] << 16)
-			+ (req.reply[5] << 8) + req.reply[6];
-		return now - RTC_OFFSET;
-#endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_ADB_PMU
-	case SYS_CTRLER_PMU:
-		if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
-			return 0;
-		while (!req.complete)
-			pmu_poll();
-		if (req.reply_len != 4)
-			printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n",
-			       req.reply_len);
-		now = (req.reply[0] << 24) + (req.reply[1] << 16)
-			+ (req.reply[2] << 8) + req.reply[3];
-		return now - RTC_OFFSET;
-#endif /* CONFIG_ADB_PMU */
-	default: ;
-	}
+	if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
+		return 0;
+	while (!req.complete)
+		cuda_poll();
+	if (req.reply_len != 7)
+		printk(KERN_ERR "cuda_get_time: got %d byte reply\n",
+		       req.reply_len);
+	now = (req.reply[3] << 24) + (req.reply[4] << 16)
+		+ (req.reply[5] << 8) + req.reply[6];
+	if (now < RTC_OFFSET)
+		return 0;
+	return now - RTC_OFFSET;
+}
+
+#define cuda_get_rtc_time(tm)	to_rtc_time(cuda_get_time(), (tm))
+
+static int cuda_set_rtc_time(struct rtc_time *tm)
+{
+	unsigned int nowtime;
+	struct adb_request req;
+
+	nowtime = from_rtc_time(tm) + RTC_OFFSET;
+	if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
+			 nowtime >> 24, nowtime >> 16, nowtime >> 8,
+			 nowtime) < 0)
+		return -ENXIO;
+	while (!req.complete)
+		cuda_poll();
+	if ((req.reply_len != 3) && (req.reply_len != 7))
+		printk(KERN_ERR "cuda_set_rtc_time: got %d byte reply\n",
+		       req.reply_len);
 	return 0;
 }
 
-void pmac_get_rtc_time(struct rtc_time *tm)
+#else
+#define cuda_get_time()		0
+#define cuda_get_rtc_time(tm)
+#define cuda_set_rtc_time(tm)	0
+#endif
+
+#ifdef CONFIG_ADB_PMU
+static unsigned long pmu_get_time(void)
 {
+	struct adb_request req;
 	unsigned long now;
 
-	now = pmac_get_boot_time();
-	to_tm(now, tm);
-	tm->tm_year -= 1900;
-	tm->tm_mon -= 1;		/* month is 0-based */
+	if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
+		return 0;
+	pmu_wait_complete(&req);
+	if (req.reply_len != 4)
+		printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n",
+		       req.reply_len);
+	now = (req.reply[0] << 24) + (req.reply[1] << 16)
+		+ (req.reply[2] << 8) + req.reply[3];
+	if (now < RTC_OFFSET)
+		return 0;
+	return now - RTC_OFFSET;
 }
 
-int pmac_set_rtc_time(struct rtc_time *tm)
+#define pmu_get_rtc_time(tm)	to_rtc_time(pmu_get_time(), (tm))
+
+static int pmu_set_rtc_time(struct rtc_time *tm)
 {
-	unsigned long nowtime;
-#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
+	unsigned int nowtime;
 	struct adb_request req;
+
+	nowtime = from_rtc_time(tm) + RTC_OFFSET;
+	if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24,
+			nowtime >> 16, nowtime >> 8, nowtime) < 0)
+		return -ENXIO;
+	pmu_wait_complete(&req);
+	if (req.reply_len != 0)
+		printk(KERN_ERR "pmu_set_rtc_time: %d byte reply from PMU\n",
+		       req.reply_len);
+	return 0;
+}
+
+#else
+#define pmu_get_time()		0
+#define pmu_get_rtc_time(tm)
+#define pmu_set_rtc_time(tm)	0
 #endif
 
-	nowtime = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
-			 tm->tm_hour, tm->tm_min, tm->tm_sec);
-	nowtime += RTC_OFFSET;
+#ifdef CONFIG_PMAC_SMU
+static unsigned long smu_get_time(void)
+{
+	struct rtc_time tm;
+
+	if (smu_get_rtc_time(&tm, 1))
+		return 0;
+	return from_rtc_time(&tm);
+}
+
+#else
+#define smu_get_time()			0
+#define smu_get_rtc_time(tm, spin)
+#define smu_set_rtc_time(tm, spin)	0
+#endif
 
+unsigned long pmac_get_boot_time(void)
+{
+	/* Get the time from the RTC, used only at boot time */
 	switch (sys_ctrler) {
-#ifdef CONFIG_ADB_CUDA
 	case SYS_CTRLER_CUDA:
-		if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
-				 nowtime >> 24, nowtime >> 16, nowtime >> 8,
-				 nowtime) < 0)
-			return 0;
-		while (!req.complete)
-			cuda_poll();
-		if ((req.reply_len != 3) && (req.reply_len != 7))
-			printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n",
-			       req.reply_len);
-		return 1;
-#endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_ADB_PMU
+		return cuda_get_time();
 	case SYS_CTRLER_PMU:
-		if (pmu_request(&req, NULL, 5, PMU_SET_RTC,
-				nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0)
-			return 0;
-		while (!req.complete)
-			pmu_poll();
-		if (req.reply_len != 0)
-			printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n",
-			       req.reply_len);
-		return 1;
-#endif /* CONFIG_ADB_PMU */
+		return pmu_get_time();
+	case SYS_CTRLER_SMU:
+		return smu_get_time();
 	default:
 		return 0;
 	}
 }
 
+void pmac_get_rtc_time(struct rtc_time *tm)
+{
+	/* Get the time from the RTC, used only at boot time */
+	switch (sys_ctrler) {
+	case SYS_CTRLER_CUDA:
+		cuda_get_rtc_time(tm);
+		break;
+	case SYS_CTRLER_PMU:
+		pmu_get_rtc_time(tm);
+		break;
+	case SYS_CTRLER_SMU:
+		smu_get_rtc_time(tm, 1);
+		break;
+	default:
+		;
+	}
+}
+
+int pmac_set_rtc_time(struct rtc_time *tm)
+{
+	switch (sys_ctrler) {
+	case SYS_CTRLER_CUDA:
+		return cuda_set_rtc_time(tm);
+	case SYS_CTRLER_PMU:
+		return pmu_set_rtc_time(tm);
+	case SYS_CTRLER_SMU:
+		return smu_set_rtc_time(tm, 1);
+	default:
+		return -ENODEV;
+	}
+}
+
+#ifdef CONFIG_PPC32
 /*
  * Calibrate the decrementer register using VIA timer 1.
  * This is used both on powermacs and CHRP machines.
  */
-int __init
-via_calibrate_decr(void)
+int __init via_calibrate_decr(void)
 {
 	struct device_node *vias;
 	volatile unsigned char __iomem *via;
@@ -217,15 +289,12 @@ via_calibrate_decr(void)
 	dend = get_dec();
 
 	ppc_tb_freq = (dstart - dend) * 100 / 6;
-	tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100);
-
-	printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %lu (%u ticks)\n",
-	       tb_ticks_per_jiffy, dstart - dend);
 
 	iounmap(via);
 	
 	return 1;
 }
+#endif
 
 #ifdef CONFIG_PM
 /*
@@ -262,19 +331,17 @@ static struct pmu_sleep_notifier time_sleep_notifier = {
 
 /*
  * Query the OF and get the decr frequency.
- * This was taken from the pmac time_init() when merging the prep/pmac
- * time functions.
  */
-void __init
-pmac_calibrate_decr(void)
+void __init pmac_calibrate_decr(void)
 {
-	struct device_node *cpu;
-	unsigned int freq, *fp;
-
 #ifdef CONFIG_PM
+	/* XXX why here? */
 	pmu_register_sleep_notifier(&time_sleep_notifier);
 #endif /* CONFIG_PM */
 
+	generic_calibrate_decr();
+
+#ifdef CONFIG_PPC32
 	/* We assume MacRISC2 machines have correct device-tree
 	 * calibration. That's better since the VIA itself seems
 	 * to be slightly off. --BenH
@@ -293,18 +360,5 @@ pmac_calibrate_decr(void)
 	if (machine_is_compatible("PowerMac3,5"))
 		if (via_calibrate_decr())
 			return;
-	/*
-	 * The cpu node should have a timebase-frequency property
-	 * to tell us the rate at which the decrementer counts.
-	 */
-	cpu = find_type_devices("cpu");
-	if (cpu == 0)
-		panic("can't find cpu node in time_init");
-	fp = (unsigned int *) get_property(cpu, "timebase-frequency", NULL);
-	if (fp == 0)
-		panic("can't get cpu timebase frequency");
-	freq = *fp;
-	printk("time_init: decrementer frequency = %u.%.6u MHz\n",
-	       freq/1000000, freq%1000000);
-	ppc_tb_freq = freq;
+#endif
 }
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 8a0969b6243c..b3a93b476d97 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -119,6 +119,8 @@ struct machdep_calls {
 	/* Interface for platform error logging */
 	void 		(*log_error)(char *buf, unsigned int err_type, int fatal);
 
+	unsigned char 	(*nvram_read_val)(int addr);
+	void		(*nvram_write_val)(int addr, unsigned char val);
 	ssize_t		(*nvram_write)(char *buf, size_t count, loff_t *index);
 	ssize_t		(*nvram_read)(char *buf, size_t count, loff_t *index);	
 	ssize_t		(*nvram_size)(void);		
@@ -165,15 +167,11 @@ struct machdep_calls {
 	unsigned long	heartbeat_reset;
 	unsigned long	heartbeat_count;
 
-	unsigned long	(*find_end_of_memory)(void);
 	void		(*setup_io_mappings)(void);
 
 	void		(*early_serial_map)(void);
 	void		(*kgdb_map_scc)(void);
 
-	unsigned char 	(*nvram_read_val)(int addr);
-	void		(*nvram_write_val)(int addr, unsigned char val);
-
 	/*
 	 * optional PCI "hooks"
 	 */
diff --git a/include/asm-ppc64/system.h b/include/asm-ppc64/system.h
index d1e00933354c..2e17ef7dbeb4 100644
--- a/include/asm-ppc64/system.h
+++ b/include/asm-ppc64/system.h
@@ -148,6 +148,8 @@ struct thread_struct;
 extern struct task_struct * _switch(struct thread_struct *prev,
 				    struct thread_struct *next);
 
+extern int powersave_nap;	/* set if nap mode can be used in idle loop */
+
 /*
  * Atomic exchange
  *
diff --git a/include/asm-ppc64/udbg.h b/include/asm-ppc64/udbg.h
index c786604aef02..8192fb8541cc 100644
--- a/include/asm-ppc64/udbg.h
+++ b/include/asm-ppc64/udbg.h
@@ -28,4 +28,7 @@ extern unsigned long udbg_ifdebug(unsigned long flags);
 extern void __init ppcdbg_initialize(void);
 
 extern void udbg_init_uart(void __iomem *comport, unsigned int speed);
+
+struct device_node;
+extern void udbg_init_scc(struct device_node *np);
 #endif