summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJeff Garzik <jgarzik@pobox.com>2005-11-12 23:05:14 -0500
committerJeff Garzik <jgarzik@pobox.com>2005-11-12 23:05:14 -0500
commit2a47ce06d534692f9bd2bf4e90a20fc9b1054c39 (patch)
tree5fb73a701184acc117509dbe20cd59c62e7034ec
parent101ffae26c23ea928fce6d31a8b4901327d91a15 (diff)
downloadblackbird-op-linux-2a47ce06d534692f9bd2bf4e90a20fc9b1054c39.tar.gz
blackbird-op-linux-2a47ce06d534692f9bd2bf4e90a20fc9b1054c39.zip
[libata sata_mv] call phy fixups during init, as well as phy reset
-rw-r--r--drivers/scsi/sata_mv.c38
1 files changed, 26 insertions, 12 deletions
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index f695d0bbb5cc..5defd056fe1c 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -293,7 +293,8 @@ struct mv_port_signal {
struct mv_host_priv;
struct mv_hw_ops {
- void (*phy_errata)(struct ata_port *ap);
+ void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port);
void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio);
void (*read_preamp)(struct mv_host_priv *hpriv, int idx,
void __iomem *mmio);
@@ -322,7 +323,8 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance,
static void mv_eng_timeout(struct ata_port *ap);
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void mv5_phy_errata(struct ata_port *ap);
+static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port);
static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
void __iomem *mmio);
@@ -330,7 +332,8 @@ static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio);
static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio);
-static void mv6_phy_errata(struct ata_port *ap);
+static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port);
static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
void __iomem *mmio);
@@ -1275,7 +1278,8 @@ static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
}
-static void mv5_phy_errata(struct ata_port *ap)
+static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port)
{
/* FIXME */
}
@@ -1411,11 +1415,10 @@ static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
writel(0x00000060, mmio + MV_GPIO_PORT_CTL);
}
-static void mv6_phy_errata(struct ata_port *ap)
+static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *port_mmio,
+ unsigned int port)
{
- struct mv_host_priv *hpriv = ap->host_set->private_data;
u32 hp_flags = hpriv->hp_flags;
- void __iomem *port_mmio = mv_ap_base(ap);
int fix_phy_mode2 =
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
int fix_phy_mode4 =
@@ -1463,8 +1466,8 @@ static void mv6_phy_errata(struct ata_port *ap)
m2 = readl(port_mmio + PHY_MODE2);
m2 &= ~MV_M2_PREAMP_MASK;
- m2 |= hpriv->signal[ap->port_no].amps;
- m2 |= hpriv->signal[ap->port_no].pre;
+ m2 |= hpriv->signal[port].amps;
+ m2 |= hpriv->signal[port].pre;
m2 &= ~(1 << 16);
writel(m2, port_mmio + PHY_MODE2);
@@ -1509,7 +1512,7 @@ static void mv_phy_reset(struct ata_port *ap)
*/
writelfl(0, port_mmio + EDMA_CMD_OFS);
- hpriv->ops->phy_errata(ap);
+ hpriv->ops->phy_errata(hpriv, port_mmio, ap->port_no);
DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
"SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
@@ -1747,7 +1750,6 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
{
int rc = 0, n_hc, port, hc;
void __iomem *mmio = probe_ent->mmio_base;
- void __iomem *port_mmio;
struct mv_host_priv *hpriv = probe_ent->private_data;
/* global interrupt mask */
@@ -1772,7 +1774,19 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
hpriv->ops->enable_leds(hpriv, mmio);
for (port = 0; port < probe_ent->n_ports; port++) {
- port_mmio = mv_port_base(mmio, port);
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+
+ if (IS_60XX(hpriv)) {
+ u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
+ ifctl |= (1 << 12);
+ writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
+ }
+
+ hpriv->ops->phy_errata(hpriv, port_mmio, port);
+ }
+
+ for (port = 0; port < probe_ent->n_ports; port++) {
+ void __iomem *port_mmio = mv_port_base(mmio, port);
mv_port_init(&probe_ent->port[port], port_mmio);
}
OpenPOWER on IntegriCloud