summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDhananjay Phadke <dhananjay@netxen.com>2009-02-12 16:41:14 -0800
committerDavid S. Miller <davem@davemloft.net>2009-02-12 16:41:14 -0800
commitacdb602fb3b7e13f3ffd2098549fab1bbfccba2f (patch)
tree0d72a4bd470625d9188f23902fbee217f75c42a3
parentcff71e89a8bd1175962b603f88f333883726b851 (diff)
downloadblackbird-op-linux-acdb602fb3b7e13f3ffd2098549fab1bbfccba2f.tar.gz
blackbird-op-linux-acdb602fb3b7e13f3ffd2098549fab1bbfccba2f.zip
netxen: remove pcie workaround
Remove workaround for pcie bug in early revisions of NX3031 (rev 41 or earlier). This is taken care of during firmware init. The workaround required writing pcie config reg of every pcie function on a card, not all of which are enabled. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/netxen/netxen_nic_main.c64
1 files changed, 0 insertions, 64 deletions
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 3b17a7936147..e02fe5ad2154 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -372,67 +372,6 @@ static void netxen_set_port_mode(struct netxen_adapter *adapter)
}
}
-#define PCI_CAP_ID_GEN 0x10
-
-static void netxen_pcie_strap_init(struct netxen_adapter *adapter)
-{
- u32 pdevfuncsave;
- u32 c8c9value = 0;
- u32 chicken = 0;
- u32 control = 0;
- int i, pos;
- struct pci_dev *pdev;
-
- pdev = adapter->pdev;
-
- adapter->hw_read_wx(adapter,
- NETXEN_PCIE_REG(PCIE_CHICKEN3), &chicken, 4);
- /* clear chicken3.25:24 */
- chicken &= 0xFCFFFFFF;
- /*
- * if gen1 and B0, set F1020 - if gen 2, do nothing
- * if gen2 set to F1000
- */
- pos = pci_find_capability(pdev, PCI_CAP_ID_GEN);
- if (pos == 0xC0) {
- pci_read_config_dword(pdev, pos + 0x10, &control);
- if ((control & 0x000F0000) != 0x00020000) {
- /* set chicken3.24 if gen1 */
- chicken |= 0x01000000;
- }
- printk(KERN_INFO "%s Gen2 strapping detected\n",
- netxen_nic_driver_name);
- c8c9value = 0xF1000;
- } else {
- /* set chicken3.24 if gen1 */
- chicken |= 0x01000000;
- printk(KERN_INFO "%s Gen1 strapping detected\n",
- netxen_nic_driver_name);
- if (adapter->ahw.revision_id == NX_P3_B0)
- c8c9value = 0xF1020;
- else
- c8c9value = 0;
-
- }
- adapter->hw_write_wx(adapter,
- NETXEN_PCIE_REG(PCIE_CHICKEN3), &chicken, 4);
-
- if (!c8c9value)
- return;
-
- pdevfuncsave = pdev->devfn;
- if (pdevfuncsave & 0x07)
- return;
-
- for (i = 0; i < 8; i++) {
- pci_read_config_dword(pdev, pos + 8, &control);
- pci_read_config_dword(pdev, pos + 8, &control);
- pci_write_config_dword(pdev, pos + 8, c8c9value);
- pdev->devfn++;
- }
- pdev->devfn = pdevfuncsave;
-}
-
static void netxen_set_msix_bit(struct pci_dev *pdev, int enable)
{
u32 control;
@@ -812,9 +751,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
netxen_load_firmware(adapter);
- if (NX_IS_REVISION_P3(revision_id))
- netxen_pcie_strap_init(adapter);
-
if (NX_IS_REVISION_P2(revision_id)) {
/* Initialize multicast addr pool owners */
OpenPOWER on IntegriCloud