diff options
| author | Linus Torvalds <torvalds@g5.osdl.org> | 2006-06-29 11:32:34 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-06-29 11:32:34 -0700 |
| commit | 3aa590c6b7c89d844f81c2e96f295cf2c6967773 (patch) | |
| tree | 6f18b295b1ff4cd7fd1880db6f56721599d64439 | |
| parent | 4d3ce21fa9d2eaeda113aa2f9c2da80d972bef64 (diff) | |
| parent | 339d76c54336443f5050b00172beb675f35e3be0 (diff) | |
| download | blackbird-op-linux-3aa590c6b7c89d844f81c2e96f295cf2c6967773.tar.gz blackbird-op-linux-3aa590c6b7c89d844f81c2e96f295cf2c6967773.zip | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (43 commits)
[POWERPC] Use little-endian bit from firmware ibm,pa-features property
[POWERPC] Make sure smp_processor_id works very early in boot
[POWERPC] U4 DART improvements
[POWERPC] todc: add support for Time-Of-Day-Clock
[POWERPC] Make lparcfg.c work when both iseries and pseries are selected
[POWERPC] Fix idr locking in init_new_context
[POWERPC] mpc7448hpc2 (taiga) board config file
[POWERPC] Add tsi108 pci and platform device data register function
[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform
[POWERPC] Correct the MAX_CONTEXT definition
powerpc: minor cleanups for mpc86xx
[POWERPC] Make sure we select CONFIG_NEW_LEDS if ADB_PMU_LED is set
[POWERPC] Simplify the code defining the 64-bit CPU features
[POWERPC] powerpc: kconfig warning fix
[POWERPC] Consolidate some of kernel/misc*.S
[POWERPC] Remove unused function call_with_mmu_off
[POWERPC] update asm-powerpc/time.h
[POWERPC] Clean up it_lp_queue.h
[POWERPC] Skip the "copy down" of the kernel if it is already at zero.
[POWERPC] Add the use of the firmware soft-reset-nmi to kdump.
...
77 files changed, 4086 insertions, 1110 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index d43e4521abf2..b9a40a35a9ed 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -340,7 +340,7 @@ config PPC_ISERIES config EMBEDDED6xx bool "Embedded 6xx/7xx/7xxx-based board" - depends on PPC32 && BROKEN + depends on PPC32 && (BROKEN||BROKEN_ON_SMP) config APUS bool "Amiga-APUS" @@ -417,12 +417,17 @@ config PPC_CELL_NATIVE default n config PPC_IBM_CELL_BLADE - bool " IBM Cell Blade" + bool "IBM Cell Blade" depends on PPC_MULTIPLATFORM && PPC64 select PPC_CELL_NATIVE select PPC_RTAS select MMIO_NVRAM select PPC_UDBG_16550 + select UDBG_RTAS_CONSOLE + +config UDBG_RTAS_CONSOLE + bool + default n config XICS depends on PPC_PSERIES @@ -435,7 +440,8 @@ config U3_DART default n config MPIC - depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP + depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP \ + || MPC7448HPC2 bool default y @@ -561,6 +567,13 @@ config TAU_AVERAGE /proc/cpuinfo. If in doubt, say N here. + +config PPC_TODC + depends on EMBEDDED6xx + bool "Generic Time-of-day Clock (TODC) support" + ---help--- + This adds support for many TODC/RTC chips. + endmenu source arch/powerpc/platforms/embedded6xx/Kconfig @@ -801,7 +814,6 @@ config GENERIC_ISA_DMA config PPC_I8259 bool - default y if MPC8641_HPCN default n config PPC_INDIRECT_PCI @@ -824,7 +836,8 @@ config MCA bool config PCI - bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) + bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \ + || MPC7448HPC2 default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS default PCI_QSPAN if !4xx && !CPM2 && 8xx diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index c69006ae8246..e29ef77d3b00 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -134,12 +134,19 @@ config PPC_EARLY_DEBUG_G5 help Select this to enable early debugging for Apple G5 machines. -config PPC_EARLY_DEBUG_RTAS +config PPC_EARLY_DEBUG_RTAS_PANEL bool "RTAS Panel" depends on PPC_RTAS help Select this to enable early debugging via the RTAS panel. +config PPC_EARLY_DEBUG_RTAS_CONSOLE + bool "RTAS Console" + depends on PPC_RTAS + select UDBG_RTAS_CONSOLE + help + Select this to enable early debugging via the RTAS console. + config PPC_EARLY_DEBUG_MAPLE bool "Maple real mode" depends on PPC_MAPLE diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index b8b8d4675dc0..e028a2ecb8a3 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17 -# Mon Jun 19 17:23:03 2006 +# Linux kernel version: 2.6.17-rc6 +# Thu Jun 22 15:28:36 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -1063,7 +1063,8 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUGGER=y -# CONFIG_XMON is not set +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y CONFIG_IRQSTACKS=y # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig new file mode 100644 index 000000000000..15a50f4ceb1f --- /dev/null +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -0,0 +1,923 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17-rc4 +# Sat May 27 18:45:55 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +CONFIG_CLASSIC32=y +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +# CONFIG_PPC_MULTIPLATFORM is not set +# CONFIG_PPC_ISERIES is not set +CONFIG_EMBEDDED6xx=y +# CONFIG_APUS is not set +CONFIG_MPIC=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_KATANA is not set +# CONFIG_WILLOW is not set +# CONFIG_CPCI690 is not set +# CONFIG_POWERPMC250 is not set +# CONFIG_CHESTNUT is not set +# CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set +# CONFIG_EV64260 is not set +# CONFIG_LOPEC is not set +# CONFIG_MVME5100 is not set +# CONFIG_PPLUS is not set +# CONFIG_PRPMC750 is not set +# CONFIG_PRPMC800 is not set +# CONFIG_SANDPOINT is not set +CONFIG_MPC7448HPC2=y +# CONFIG_RADSTONE_PPC7D is not set +# CONFIG_PAL4 is not set +# CONFIG_GEMINI is not set +# CONFIG_EST8260 is not set +# CONFIG_SBC82xx is not set +# CONFIG_SBS8260 is not set +# CONFIG_RPX8260 is not set +# CONFIG_TQM8260 is not set +# CONFIG_ADS8272 is not set +# CONFIG_PQ2FADS is not set +# CONFIG_LITE5200 is not set +# CONFIG_EV64360 is not set +CONFIG_TSI108_BRIDGE=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +# CONFIG_SCSI_ATA_PIIX is not set +CONFIG_SCSI_SATA_MV=y +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_PDC_ADMA is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_TSI108_ETH=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 803858e86160..814f242aeb8c 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -50,7 +50,8 @@ extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o extra-y += vmlinux.lds -obj-y += time.o prom.o traps.o setup-common.o udbg.o +obj-y += time.o prom.o traps.o setup-common.o \ + udbg.o misc.o obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o diff --git a/arch/powerpc/kernel/cpu_setup_power4.S b/arch/powerpc/kernel/cpu_setup_power4.S index 271418308d53..1fc863261003 100644 --- a/arch/powerpc/kernel/cpu_setup_power4.S +++ b/arch/powerpc/kernel/cpu_setup_power4.S @@ -125,7 +125,12 @@ _GLOBAL(__save_cpu_setup) cmpwi r0,0x44 bne 2f -1: /* Save HID0,1,4 and 5 */ +1: /* skip if not running in HV mode */ + mfmsr r0 + rldicl. r0,r0,4,63 + beq 2f + + /* Save HID0,1,4 and 5 */ mfspr r3,SPRN_HID0 std r3,CS_HID0(r5) mfspr r3,SPRN_HID1 @@ -159,7 +164,12 @@ _GLOBAL(__restore_cpu_setup) cmpwi r0,0x44 bnelr -1: /* Before accessing memory, we make sure rm_ci is clear */ +1: /* skip if not running in HV mode */ + mfmsr r0 + rldicl. r0,r0,4,63 + beqlr + + /* Before accessing memory, we make sure rm_ci is clear */ li r0,0 mfspr r3,SPRN_HID4 rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 1c114880dc05..abf7d42a8b07 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -722,18 +722,6 @@ struct cpu_spec cpu_specs[] = { .oprofile_type = PPC_OPROFILE_G4, .platform = "ppc7450", }, - { /* 8641 */ - .pvr_mask = 0xffffffff, - .pvr_value = 0x80040010, - .cpu_name = "8641", - .cpu_features = CPU_FTRS_7447A, - .cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP, - .icache_bsize = 32, - .dcache_bsize = 32, - .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x - }, - { /* 82xx (8240, 8245, 8260 are all 603e cores) */ .pvr_mask = 0x7fff0000, .pvr_value = 0x00810000, diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 22ceba844bf4..358cecdc6aef 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -24,9 +24,11 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/types.h> +#include <linux/irq.h> #include <asm/processor.h> #include <asm/machdep.h> +#include <asm/kexec.h> #include <asm/kdump.h> #include <asm/lmb.h> #include <asm/firmware.h> @@ -41,6 +43,7 @@ /* This keeps a track of which one is crashing cpu. */ int crashing_cpu = -1; +static cpumask_t cpus_in_crash = CPU_MASK_NONE; static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data, size_t data_len) @@ -98,34 +101,66 @@ static void crash_save_this_cpu(struct pt_regs *regs, int cpu) } #ifdef CONFIG_SMP -static atomic_t waiting_for_crash_ipi; +static atomic_t enter_on_soft_reset = ATOMIC_INIT(0); void crash_ipi_callback(struct pt_regs *regs) { int cpu = smp_processor_id(); - if (cpu == crashing_cpu) - return; - if (!cpu_online(cpu)) return; - if (ppc_md.kexec_cpu_down) - ppc_md.kexec_cpu_down(1, 1); - local_irq_disable(); + if (!cpu_isset(cpu, cpus_in_crash)) + crash_save_this_cpu(regs, cpu); + cpu_set(cpu, cpus_in_crash); - crash_save_this_cpu(regs, cpu); - atomic_dec(&waiting_for_crash_ipi); + /* + * Entered via soft-reset - could be the kdump + * process is invoked using soft-reset or user activated + * it if some CPU did not respond to an IPI. + * For soft-reset, the secondary CPU can enter this func + * twice. 1 - using IPI, and 2. soft-reset. + * Tell the kexec CPU that entered via soft-reset and ready + * to go down. + */ + if (cpu_isset(cpu, cpus_in_sr)) { + cpu_clear(cpu, cpus_in_sr); + atomic_inc(&enter_on_soft_reset); + } + + /* + * Starting the kdump boot. + * This barrier is needed to make sure that all CPUs are stopped. + * If not, soft-reset will be invoked to bring other CPUs. + */ + while (!cpu_isset(crashing_cpu, cpus_in_crash)) + cpu_relax(); + + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(1, 1); kexec_smp_wait(); /* NOTREACHED */ } -static void crash_kexec_prepare_cpus(void) +/* + * Wait until all CPUs are entered via soft-reset. + */ +static void crash_soft_reset_check(int cpu) +{ + unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */ + + cpu_clear(cpu, cpus_in_sr); + while (atomic_read(&enter_on_soft_reset) != ncpus) + cpu_relax(); +} + + +static void crash_kexec_prepare_cpus(int cpu) { unsigned int msecs; - atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); + unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */ crash_send_ipi(crash_ipi_callback); smp_wmb(); @@ -133,14 +168,13 @@ static void crash_kexec_prepare_cpus(void) /* * FIXME: Until we will have the way to stop other CPUSs reliabally, * the crash CPU will send an IPI and wait for other CPUs to - * respond. If not, proceed the kexec boot even though we failed to - * capture other CPU states. + * respond. * Delay of at least 10 seconds. */ - printk(KERN_ALERT "Sending IPI to other cpus...\n"); + printk(KERN_EMERG "Sending IPI to other cpus...\n"); msecs = 10000; - while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) { - barrier(); + while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) { + cpu_relax(); mdelay(1); } @@ -149,18 +183,71 @@ static void crash_kexec_prepare_cpus(void) /* * FIXME: In case if we do not get all CPUs, one possibility: ask the * user to do soft reset such that we get all. - * IPI handler is already set by the panic cpu initially. Therefore, - * all cpus could invoke this handler from die() and the panic CPU - * will call machine_kexec() directly from this handler to do - * kexec boot. + * Soft-reset will be used until better mechanism is implemented. + */ + if (cpus_weight(cpus_in_crash) < ncpus) { + printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n", + ncpus - cpus_weight(cpus_in_crash)); + printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n"); + cpus_in_sr = CPU_MASK_NONE; + atomic_set(&enter_on_soft_reset, 0); + while (cpus_weight(cpus_in_crash) < ncpus) + cpu_relax(); + } + /* + * Make sure all CPUs are entered via soft-reset if the kdump is + * invoked using soft-reset. */ - if (atomic_read(&waiting_for_crash_ipi)) - printk(KERN_ALERT "done waiting: %d cpus not responding\n", - atomic_read(&waiting_for_crash_ipi)); + if (cpu_isset(cpu, cpus_in_sr)) + crash_soft_reset_check(cpu); /* Leave the IPI callback set */ } + +/* + * This function will be called by secondary cpus or by kexec cpu + * if soft-reset is activated to stop some CPUs. + */ +void crash_kexec_secondary(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + unsigned long flags; + int msecs = 5; + + local_irq_save(flags); + /* Wait 5ms if the kexec CPU is not entered yet. */ + while (crashing_cpu < 0) { + if (--msecs < 0) { + /* + * Either kdump image is not loaded or + * kdump process is not started - Probably xmon + * exited using 'x'(exit and recover) or + * kexec_should_crash() failed for all running tasks. + */ + cpu_clear(cpu, cpus_in_sr); + local_irq_restore(flags); + return; + } + mdelay(1); + cpu_relax(); + } + if (cpu == crashing_cpu) { + /* + * Panic CPU will enter this func only via soft-reset. + * Wait until all secondary CPUs entered and + * then start kexec boot. + */ + crash_soft_reset_check(cpu); + cpu_set(crashing_cpu, cpus_in_crash); + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(1, 0); + machine_kexec(kexec_crash_image); + /* NOTREACHED */ + } + crash_ipi_callback(regs); +} + #else -static void crash_kexec_prepare_cpus(void) +static void crash_kexec_prepare_cpus(int cpu) { /* * move the secondarys to us so that we can copy @@ -171,6 +258,10 @@ static void crash_kexec_prepare_cpus(void) smp_release_cpus(); } +void crash_kexec_secondary(struct pt_regs *regs) +{ + cpus_in_sr = CPU_MASK_NONE; +} #endif void default_machine_crash_shutdown(struct pt_regs *regs) @@ -199,14 +290,14 @@ void default_machine_crash_shutdown(struct pt_regs *regs) desc->chip->disable(irq); } - if (ppc_md.kexec_cpu_down) - ppc_md.kexec_cpu_down(1, 0); - /* * Make a note of crashing cpu. Will be used in machine_kexec * such that another IPI will not be sent. */ crashing_cpu = smp_processor_id(); - crash_kexec_prepare_cpus(); crash_save_this_cpu(regs, crashing_cpu); + crash_kexec_prepare_cpus(crashing_cpu); + cpu_set(crashing_cpu, cpus_in_crash); + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(1, 0); } diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 831acbdf2592..8cfd040d1f50 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -85,34 +85,6 @@ END_FTR_SECTION(0, 1) /* Catch branch to 0 in real mode */ trap -#ifdef CONFIG_PPC_ISERIES - /* - * At offset 0x20, there is a pointer to iSeries LPAR data. - * This is required by the hypervisor - */ - . = 0x20 - .llong hvReleaseData-KERNELBASE - - /* - * At offset 0x28 and 0x30 are offsets to the mschunks_map - * array (used by the iSeries LPAR debugger to do translation - * between physical addresses and absolute addresses) and - * to the pidhash table (also used by the debugger) - */ - .llong mschunks_map-KERNELBASE - .llong 0 /* pidhash-KERNELBASE SFRXXX */ - - /* Offset 0x38 - Pointer to start of embedded System.map */ - .globl embedded_sysmap_start -embedded_sysmap_start: - .llong 0 - /* Offset 0x40 - Pointer to end of embedded System.map */ - .globl embedded_sysmap_end -embedded_sysmap_end: - .llong 0 - -#endif /* CONFIG_PPC_ISERIES */ - /* Secondary processors spin on this value until it goes to 1. */ .globl __secondary_hold_spinloop __secondary_hold_spinloop: @@ -124,6 +96,15 @@ __secondary_hold_spinloop: __secondary_hold_acknowledge: .llong 0x0 +#ifdef CONFIG_PPC_ISERIES + /* + * At offset 0x20, there is a pointer to iSeries LPAR data. + * This is required by the hypervisor + */ + . = 0x20 + .llong hvReleaseData-KERNELBASE +#endif /* CONFIG_PPC_ISERIES */ + . = 0x60 /* * The following code is used on pSeries to hold secondary processors @@ -1602,9 +1583,6 @@ _GLOBAL(__start_initialization_multiplatform) /* Setup some critical 970 SPRs before switching MMU off */ bl .__970_cpu_preinit - /* cpu # */ - li r24,0 - /* Switch off MMU if not already */ LOAD_REG_IMMEDIATE(r4, .__after_prom_start - KERNELBASE) add r4,r4,r30 @@ -1683,6 +1661,9 @@ _STATIC(__after_prom_start) /* i.e. where we are running */ /* the source addr */ + cmpdi r4,0 /* In some cases the loader may */ + beq .start_here_multiplatform /* have already put us at zero */ + /* so we can skip the copy. */ LOAD_REG_IMMEDIATE(r5,copy_to_here) /* # bytes of memory to copy */ sub r5,r5,r27 @@ -1962,14 +1943,6 @@ _STATIC(start_here_common) li r3,0 bl .do_cpu_ftr_fixups - LOAD_REG_IMMEDIATE(r26, boot_cpuid) - lwz r26,0(r26) - - LOAD_REG_IMMEDIATE(r24, paca) /* Get base vaddr of paca array */ - mulli r13,r26,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r24 /* for this processor. */ - mtspr SPRN_SPRG3,r13 - /* ptr to current */ LOAD_REG_IMMEDIATE(r4, init_task) std r4,PACACURRENT(r13) @@ -1995,17 +1968,6 @@ _STATIC(start_here_common) /* Not reached */ BUG_OPCODE -/* Put the paca pointer into r13 and SPRG3 */ -_GLOBAL(setup_boot_paca) - LOAD_REG_IMMEDIATE(r3, boot_cpuid) - lwz r3,0(r3) - LOAD_REG_IMMEDIATE(r4, paca) /* Get base vaddr of paca array */ - mulli r3,r3,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r3,r4 /* for this processor. */ - mtspr SPRN_SPRG3,r13 - - blr - /* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the bss, which is page-aligned. diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 7cb77c20fc5d..3d677ac99659 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -38,6 +38,7 @@ #include <asm/iommu.h> #include <asm/pci-bridge.h> #include <asm/machdep.h> +#include <asm/kdump.h> #define DBG(...) @@ -440,8 +441,37 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid) tbl->it_largehint = tbl->it_halfpoint; spin_lock_init(&tbl->it_lock); +#ifdef CONFIG_CRASH_DUMP + if (ppc_md.tce_get) { + unsigned long index, tceval; + unsigned long tcecount = 0; + + /* + * Reserve the existing mappings left by the first kernel. + */ + for (index = 0; index < tbl->it_size; index++) { + tceval = ppc_md.tce_get(tbl, index + tbl->it_offset); + /* + * Freed TCE entry contains 0x7fffffffffffffff on JS20 + */ + if (tceval && (tceval != 0x7fffffffffffffffUL)) { + __set_bit(index, tbl->it_map); + tcecount++; + } + } + if ((tbl->it_size - tcecount) < KDUMP_MIN_TCE_ENTRIES) { + printk(KERN_WARNING "TCE table is full; "); + printk(KERN_WARNING "freeing %d entries for the kdump boot\n", + KDUMP_MIN_TCE_ENTRIES); + for (index = tbl->it_size - KDUMP_MIN_TCE_ENTRIES; + index < tbl->it_size; index++) + __clear_bit(index, tbl->it_map); + } + } +#else /* Clear the hardware table in case firmware left allocations in it */ ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size); +#endif if (!welcomed) { printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n", diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 6e67b5b49ba1..3a9b78d03542 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -302,6 +302,17 @@ void __init find_legacy_serial_ports(void) of_node_put(isa); } + /* First fill our array with tsi-bridge ports */ + for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) { + struct device_node *tsi = of_get_parent(np); + if (tsi && !strcmp(tsi->type, "tsi-bridge")) { + index = add_legacy_soc_port(np, np); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } + of_node_put(tsi); + } + #ifdef CONFIG_PCI /* Next, try to locate PCI ports */ for (np = NULL; (np = of_find_all_nodes(np));) { diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index c02deaab26c7..73edc3c16137 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -45,11 +45,9 @@ static struct proc_dir_entry *proc_ppc64_lparcfg; #define LPARCFG_BUFF_SIZE 4096 -#ifdef CONFIG_PPC_ISERIES - /* - * For iSeries legacy systems, the PPA purr function is available from the - * emulated_time_base field in the paca. + * Track sum of all purrs across all processors. This is used to further + * calculate usage values by different applications */ static unsigned long get_purr(void) { @@ -57,48 +55,31 @@ static unsigned long get_purr(void) int cpu; for_each_possible_cpu(cpu) { - sum_purr += lppaca[cpu].emulated_time_base; + if (firmware_has_feature(FW_FEATURE_ISERIES)) + sum_purr += lppaca[cpu].emulated_time_base; + else { + struct cpu_usage *cu; -#ifdef PURR_DEBUG - printk(KERN_INFO "get_purr for cpu (%d) has value (%ld) \n", - cpu, lppaca[cpu].emulated_time_base); -#endif + cu = &per_cpu(cpu_usage_array, cpu); + sum_purr += cu->current_tb; + } } return sum_purr; } -#define lparcfg_write NULL +#ifdef CONFIG_PPC_ISERIES /* * Methods used to fetch LPAR data when running on an iSeries platform. */ -static int lparcfg_data(struct seq_file *m, void *v) +static int iseries_lparcfg_data(struct seq_file *m, void *v) { - unsigned long pool_id, lp_index; + unsigned long pool_id; int shared, entitled_capacity, max_entitled_capacity; int processors, max_processors; unsigned long purr = get_purr(); - seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); - shared = (int)(get_lppaca()->shared_proc); - seq_printf(m, "serial_number=%c%c%c%c%c%c%c\n", - e2a(xItExtVpdPanel.mfgID[2]), - e2a(xItExtVpdPanel.mfgID[3]), - e2a(xItExtVpdPanel.systemSerial[1]), - e2a(xItExtVpdPanel.systemSerial[2]), - e2a(xItExtVpdPanel.systemSerial[3]), - e2a(xItExtVpdPanel.systemSerial[4]), - e2a(xItExtVpdPanel.systemSerial[5])); - - seq_printf(m, "system_type=%c%c%c%c\n", - e2a(xItExtVpdPanel.machineType[0]), - e2a(xItExtVpdPanel.machineType[1]), - e2a(xItExtVpdPanel.machineType[2]), - e2a(xItExtVpdPanel.machineType[3])); - - lp_index = HvLpConfig_getLpIndex(); - seq_printf(m, "partition_id=%d\n", (int)lp_index); seq_printf(m, "system_active_processors=%d\n", (int)HvLpConfig_getSystemPhysicalProcessors()); @@ -137,6 +118,14 @@ static int lparcfg_data(struct seq_file *m, void *v) return 0; } + +#else /* CONFIG_PPC_ISERIES */ + +static int iseries_lparcfg_data(struct seq_file *m, void *v) +{ + return 0; +} + #endif /* CONFIG_PPC_ISERIES */ #ifdef CONFIG_PPC_PSERIES @@ -213,22 +202,6 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs) log_plpar_hcall_return(rc, "H_PIC"); } -/* Track sum of all purrs across all processors. This is used to further */ -/* calculate usage values by different applications */ - -static unsigned long get_purr(void) -{ - unsigned long sum_purr = 0; - int cpu; - struct cpu_usage *cu; - - for_each_possible_cpu(cpu) { - cu = &per_cpu(cpu_usage_array, cpu); - sum_purr += cu->current_tb; - } - return sum_purr; -} - #define SPLPAR_CHARACTERISTICS_TOKEN 20 #define SPLPAR_MAXLENGTH 1026*(sizeof(char)) @@ -333,35 +306,13 @@ static int lparcfg_count_active_processors(void) return count; } -static int lparcfg_data(struct seq_file *m, void *v) +static int pseries_lparcfg_data(struct seq_file *m, void *v) { int partition_potential_processors; int partition_active_processors; - struct device_node *rootdn; - const char *model = ""; - const char *system_id = ""; - unsigned int *lp_index_ptr, lp_index = 0; struct device_node *rtas_node; int *lrdrp = NULL; - rootdn = find_path_device("/"); - if (rootdn) { - model = get_property(rootdn, "model", NULL); - system_id = get_property(rootdn, "system-id", NULL); - lp_index_ptr = (unsigned int *) - get_property(rootdn, "ibm,partition-no", NULL); - if (lp_index_ptr) - lp_index = *lp_index_ptr; - } - - seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); - - seq_printf(m, "serial_number=%s\n", system_id); - - seq_printf(m, "system_type=%s\n", model); - - seq_printf(m, "partition_id=%d\n", (int)lp_index); - rtas_node = find_path_device("/rtas"); if (rtas_node) lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", @@ -549,8 +500,61 @@ out: return retval; } +#else /* CONFIG_PPC_PSERIES */ + +static int pseries_lparcfg_data(struct seq_file *m, void *v) +{ + return 0; +} + +static ssize_t lparcfg_write(struct file *file, const char __user * buf, + size_t count, loff_t * off) +{ + return count; +} + #endif /* CONFIG_PPC_PSERIES */ +static int lparcfg_data(struct seq_file *m, void *v) +{ + struct device_node *rootdn; + const char *model = ""; + const char *system_id = ""; + const char *tmp; + unsigned int *lp_index_ptr, lp_index = 0; + + seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); + + rootdn = find_path_device("/"); + if (rootdn) { + tmp = get_property(rootdn, "model", NULL); + if (tmp) { + model = tmp; + /* Skip "IBM," - see platforms/iseries/dt.c */ + if (firmware_has_feature(FW_FEATURE_ISERIES)) + model += 4; + } + tmp = get_property(rootdn, "system-id", NULL); + if (tmp) { + system_id = tmp; + /* Skip "IBM," - see platforms/iseries/dt.c */ + if (firmware_has_feature(FW_FEATURE_ISERIES)) + system_id += 4; + } + lp_index_ptr = (unsigned int *) + get_property(rootdn, "ibm,partition-no", NULL); + if (lp_index_ptr) + lp_index = *lp_index_ptr; + } + seq_printf(m, "serial_number=%s\n", system_id); + seq_printf(m, "system_type=%s\n", model); + seq_printf(m, "partition_id=%d\n", (int)lp_index); + + if (firmware_has_feature(FW_FEATURE_ISERIES)) + return iseries_lparcfg_data(m, v); + return pseries_lparcfg_data(m, v); +} + static int lparcfg_open(struct inode *inode, struct file *file) { return single_open(file, lparcfg_data, NULL); @@ -569,7 +573,8 @@ int __init lparcfg_init(void) mode_t mode = S_IRUSR | S_IRGRP | S_IROTH; /* Allow writing if we have FW_FEATURE_SPLPAR */ - if (firmware_has_feature(FW_FEATURE_SPLPAR)) { + if (firmware_has_feature(FW_FEATURE_SPLPAR) && + !firmware_has_feature(FW_FEATURE_ISERIES)) { lparcfg_fops.write = lparcfg_write; mode |= S_IWUSR; } diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index a8fa04ef27cd..b438d45a068c 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -378,11 +378,13 @@ static void __init export_crashk_values(void) of_node_put(node); } -void __init kexec_setup(void) +static int __init kexec_setup(void) { export_htab_values(); export_crashk_values(); + return 0; } +__initcall(kexec_setup); static int __init early_parse_crashk(char *p) { diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S new file mode 100644 index 000000000000..fc23040d5a26 --- /dev/null +++ b/arch/powerpc/kernel/misc.S @@ -0,0 +1,203 @@ +/* + * This file contains miscellaneous low-level functions. + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras. + * + * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) + * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <asm/ppc_asm.h> + + .text + +#ifdef CONFIG_PPC64 +#define IN_SYNC twi 0,r5,0; isync +#define EIEIO_32 +#define SYNC_64 sync +#else /* CONFIG_PPC32 */ +#define IN_SYNC +#define EIEIO_32 eieio +#define SYNC_64 +#endif +/* + * Returns (address we are running at) - (address we were linked at) + * for use before the text and data are mapped to KERNELBASE. + */ + +_GLOBAL(reloc_offset) + mflr r0 + bl 1f +1: mflr r3 + LOAD_REG_IMMEDIATE(r4,1b) + subf r3,r4,r3 + mtlr r0 + blr + +/* + * add_reloc_offset(x) returns x + reloc_offset(). + */ +_GLOBAL(add_reloc_offset) + mflr r0 + bl 1f +1: mflr r5 + LOAD_REG_IMMEDIATE(r4,1b) + subf r5,r4,r5 + add r3,r3,r5 + mtlr r0 + blr + +/* + * I/O string operations + * + * insb(port, buf, len) + * outsb(port, buf, len) + * insw(port, buf, len) + * outsw(port, buf, len) + * insl(port, buf, len) + * outsl(port, buf, len) + * insw_ns(port, buf, len) + * outsw_ns(port, buf, len) + * insl_ns(port, buf, len) + * outsl_ns(port, buf, len) + * + * The *_ns versions don't do byte-swapping. + */ +_GLOBAL(_insb) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,1 + blelr- +00: lbz r5,0(r3) + eieio + stbu r5,1(r4) + bdnz 00b + IN_SYNC + blr + +_GLOBAL(_outsb) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,1 + blelr- +00: lbzu r5,1(r4) + stb r5,0(r3) + EIEIO_32 + bdnz 00b + SYNC_64 + blr + +_GLOBAL(_insw) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhbrx r5,0,r3 + eieio + sthu r5,2(r4) + bdnz 00b + IN_SYNC + blr + +_GLOBAL(_outsw) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhzu r5,2(r4) + EIEIO_32 + sthbrx r5,0,r3 + bdnz 00b + SYNC_64 + blr + +_GLOBAL(_insl) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwbrx r5,0,r3 + eieio + stwu r5,4(r4) + bdnz 00b + IN_SYNC + blr + +_GLOBAL(_outsl) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwzu r5,4(r4) + stwbrx r5,0,r3 + EIEIO_32 + bdnz 00b + SYNC_64 + blr + +#ifdef CONFIG_PPC32 +_GLOBAL(__ide_mm_insw) +#endif +_GLOBAL(_insw_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhz r5,0(r3) + eieio + sthu r5,2(r4) + bdnz 00b + IN_SYNC + blr + +#ifdef CONFIG_PPC32 +_GLOBAL(__ide_mm_outsw) +#endif +_GLOBAL(_outsw_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhzu r5,2(r4) + sth r5,0(r3) + EIEIO_32 + bdnz 00b + SYNC_64 + blr + +#ifdef CONFIG_PPC32 +_GLOBAL(__ide_mm_insl) +#endif +_GLOBAL(_insl_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwz r5,0(r3) + eieio + stwu r5,4(r4) + bdnz 00b + IN_SYNC + blr + +#ifdef CONFIG_PPC32 +_GLOBAL(__ide_mm_outsl) +#endif +_GLOBAL(_outsl_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwzu r5,4(r4) + stw r5,0(r3) + EIEIO_32 + bdnz 00b + SYNC_64 + blr + diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 01d3916c4cb1..c74774e2175d 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -61,32 +61,6 @@ _GLOBAL(mulhdu) blr /* - * Returns (address we're running at) - (address we were linked at) - * for use before the text and data are mapped to KERNELBASE. - */ -_GLOBAL(reloc_offset) - mflr r0 - bl 1f -1: mflr r3 - LOAD_REG_IMMEDIATE(r4,1b) - subf r3,r4,r3 - mtlr r0 - blr - -/* - * add_reloc_offset(x) returns x + reloc_offset(). - */ -_GLOBAL(add_reloc_offset) - mflr r0 - bl 1f -1: mflr r5 - LOAD_REG_IMMEDIATE(r4,1b) - subf r5,r4,r5 - add r3,r3,r5 - mtlr r0 - blr - -/* * sub_reloc_offset(x) returns x - reloc_offset(). */ _GLOBAL(sub_reloc_offset) @@ -781,136 +755,6 @@ _GLOBAL(atomic_set_mask) blr /* - * I/O string operations - * - * insb(port, buf, len) - * outsb(port, buf, len) - * insw(port, buf, len) - * outsw(port, buf, len) - * insl(port, buf, len) - * outsl(port, buf, len) - * insw_ns(port, buf, len) - * outsw_ns(port, buf, len) - * insl_ns(port, buf, len) - * outsl_ns(port, buf, len) - * - * The *_ns versions don't do byte-swapping. - */ -_GLOBAL(_insb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbz r5,0(r3) - eieio - stbu r5,1(r4) - bdnz 00b - blr - -_GLOBAL(_outsb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbzu r5,1(r4) - stb r5,0(r3) - eieio - bdnz 00b - blr - -_GLOBAL(_insw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhbrx r5,0,r3 - eieio - sthu r5,2(r4) - bdnz 00b - blr - -_GLOBAL(_outsw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - eieio - sthbrx r5,0,r3 - bdnz 00b - blr - -_GLOBAL(_insl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwbrx r5,0,r3 - eieio - stwu r5,4(r4) - bdnz 00b - blr - -_GLOBAL(_outsl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stwbrx r5,0,r3 - eieio - bdnz 00b - blr - -_GLOBAL(__ide_mm_insw) -_GLOBAL(_insw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhz r5,0(r3) - eieio - sthu r5,2(r4) - bdnz 00b - blr - -_GLOBAL(__ide_mm_outsw) -_GLOBAL(_outsw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sth r5,0(r3) - eieio - bdnz 00b - blr - -_GLOBAL(__ide_mm_insl) -_GLOBAL(_insl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwz r5,0(r3) - eieio - stwu r5,4(r4) - bdnz 00b - blr - -_GLOBAL(__ide_mm_outsl) -_GLOBAL(_outsl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stw r5,0(r3) - eieio - bdnz 00b - blr - -/* * Extended precision shifts. * * Updated to be valid for shift counts from 0 to 63 inclusive. diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index e8883d42c43c..580891cb8ccb 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -1,14 +1,12 @@ /* - * arch/powerpc/kernel/misc64.S - * * This file contains miscellaneous low-level functions. * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) * and Paul Mackerras. * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) - * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) - * + * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -30,41 +28,10 @@ .text -/* - * Returns (address we are running at) - (address we were linked at) - * for use before the text and data are mapped to KERNELBASE. - */ - -_GLOBAL(reloc_offset) - mflr r0 - bl 1f -1: mflr r3 - LOAD_REG_IMMEDIATE(r4,1b) - subf r3,r4,r3 - mtlr r0 - blr - -/* - * add_reloc_offset(x) returns x + reloc_offset(). - */ -_GLOBAL(add_reloc_offset) - mflr r0 - bl 1f -1: mflr r5 - LOAD_REG_IMMEDIATE(r4,1b) - subf r5,r4,r5 - add r3,r3,r5 - mtlr r0 - blr - _GLOBAL(get_msr) mfmsr r3 blr -_GLOBAL(get_dar) - mfdar r3 - blr - _GLOBAL(get_srr0) mfsrr0 r3 blr @@ -72,10 +39,6 @@ _GLOBAL(get_srr0) _GLOBAL(get_srr1) mfsrr1 r3 blr - -_GLOBAL(get_sp) - mr r3,r1 - blr #ifdef CONFIG_IRQSTACKS _GLOBAL(call_do_softirq) @@ -101,48 +64,6 @@ _GLOBAL(call___do_IRQ) blr #endif /* CONFIG_IRQSTACKS */ - /* - * To be called by C code which needs to do some operations with MMU - * disabled. Note that interrupts have to be disabled by the caller - * prior to calling us. The code called _MUST_ be in the RMO of course - * and part of the linear mapping as we don't attempt to translate the - * stack pointer at all. The function is called with the stack switched - * to this CPU emergency stack - * - * prototype is void *call_with_mmu_off(void *func, void *data); - * - * the called function is expected to be of the form - * - * void *called(void *data); - */ -_GLOBAL(call_with_mmu_off) - mflr r0 /* get link, save it on stackframe */ - std r0,16(r1) - mr r1,r5 /* save old stack ptr */ - ld r1,PACAEMERGSP(r13) /* get emerg. stack */ - subi r1,r1,STACK_FRAME_OVERHEAD - std r0,16(r1) /* save link on emerg. stack */ - std r5,0(r1) /* save old stack ptr in backchain */ - ld r3,0(r3) /* get to real function ptr (assume same TOC) */ - bl 2f /* we need LR to return, continue at label 2 */ - - ld r0,16(r1) /* we return here from the call, get LR and */ - ld r1,0(r1) /* .. old stack ptr */ - mtspr SPRN_SRR0,r0 /* and get back to virtual mode with these */ - mfmsr r4 - ori r4,r4,MSR_IR|MSR_DR - mtspr SPRN_SRR1,r4 - rfid - -2: mtspr SPRN_SRR0,r3 /* coming from above, enter real mode */ - mr r3,r4 /* get parameter */ - mfmsr r0 - ori r0,r0,MSR_IR|MSR_DR - xori r0,r0,MSR_IR|MSR_DR - mtspr SPRN_SRR1,r0 - rfid - - .section ".toc","aw" PPC64_CACHES: .tc ppc64_caches[TC],ppc64_caches @@ -323,144 +244,6 @@ _GLOBAL(__flush_dcache_icache) bdnz 1b isync blr - -/* - * I/O string operations - * - * insb(port, buf, len) - * outsb(port, buf, len) - * insw(port, buf, len) - * outsw(port, buf, len) - * insl(port, buf, len) - * outsl(port, buf, len) - * insw_ns(port, buf, len) - * outsw_ns(port, buf, len) - * insl_ns(port, buf, len) - * outsl_ns(port, buf, len) - * - * The *_ns versions don't do byte-swapping. - */ -_GLOBAL(_insb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbz r5,0(r3) - eieio - stbu r5,1(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbzu r5,1(r4) - stb r5,0(r3) - bdnz 00b - sync - blr - -_GLOBAL(_insw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhbrx r5,0,r3 - eieio - sthu r5,2(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sthbrx r5,0,r3 - bdnz 00b - sync - blr - -_GLOBAL(_insl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwbrx r5,0,r3 - eieio - stwu r5,4(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stwbrx r5,0,r3 - bdnz 00b - sync - blr - -/* _GLOBAL(ide_insw) now in drivers/ide/ide-iops.c */ -_GLOBAL(_insw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhz r5,0(r3) - eieio - sthu r5,2(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -/* _GLOBAL(ide_outsw) now in drivers/ide/ide-iops.c */ -_GLOBAL(_outsw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sth r5,0(r3) - bdnz 00b - sync - blr - -_GLOBAL(_insl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwz r5,0(r3) - eieio - stwu r5,4(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stw r5,0(r3) - bdnz 00b - sync - blr /* * identify_cpu and calls setup_cpu @@ -605,6 +388,7 @@ _GLOBAL(real_writeb) blr #endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ +#ifdef CONFIG_CPU_FREQ_PMAC64 /* * SCOM access functions for 970 (FX only for now) * @@ -673,6 +457,7 @@ _GLOBAL(scom970_write) /* restore interrupts */ mtmsrd r5,1 blr +#endif /* CONFIG_CPU_FREQ_PMAC64 */ /* diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index f505a8827e3e..a0bb354c1c08 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -16,7 +16,6 @@ #include <asm/ptrace.h> #include <asm/page.h> #include <asm/lppaca.h> -#include <asm/iseries/it_lp_queue.h> #include <asm/iseries/it_lp_reg_save.h> #include <asm/paca.h> diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 483455c5bb02..320c913435cd 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -30,6 +30,7 @@ #include <linux/bitops.h> #include <linux/module.h> #include <linux/kexec.h> +#include <linux/debugfs.h> #include <asm/prom.h> #include <asm/rtas.h> @@ -952,6 +953,7 @@ static struct ibm_pa_feature { /* put this back once we know how to test if firmware does 64k IO */ {CPU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0}, #endif + {CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0}, }; static void __init check_cpu_pa_features(unsigned long node) @@ -1124,24 +1126,6 @@ static int __init early_init_dt_scan_chosen(unsigned long node, tce_alloc_end = *lprop; #endif -#ifdef CONFIG_PPC_RTAS - /* To help early debugging via the front panel, we retrieve a minimal - * set of RTAS infos now if available - */ - { - u64 *basep, *entryp, *sizep; - - basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL); - entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL); - sizep = of_get_flat_dt_prop(node, "linux,rtas-size", NULL); - if (basep && entryp && sizep) { - rtas.base = *basep; - rtas.entry = *entryp; - rtas.size = *sizep; - } - } -#endif /* CONFIG_PPC_RTAS */ - #ifdef CONFIG_KEXEC lprop = (u64*)of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL); if (lprop) @@ -1326,6 +1310,11 @@ void __init early_init_devtree(void *params) /* Setup flat device-tree pointer */ initial_boot_params = params; +#ifdef CONFIG_PPC_RTAS + /* Some machines might need RTAS info for debugging, grab it now. */ + of_scan_flat_dt(early_init_dt_scan_rtas, NULL); +#endif + /* Retrieve various informations from the /chosen node of the * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... @@ -2148,3 +2137,27 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread) } return NULL; } + +#ifdef DEBUG +static struct debugfs_blob_wrapper flat_dt_blob; + +static int __init export_flat_device_tree(void) +{ + struct dentry *d; + + d = debugfs_create_dir("powerpc", NULL); + if (!d) + return 1; + + flat_dt_blob.data = initial_boot_params; + flat_dt_blob.size = initial_boot_params->totalsize; + + d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR, + d, &flat_dt_blob); + if (!d) + return 1; + + return 0; +} +__initcall(export_flat_device_tree); +#endif diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 17dc79198515..4a4cb5598402 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -38,16 +38,19 @@ struct rtas_t rtas = { .lock = SPIN_LOCK_UNLOCKED }; +EXPORT_SYMBOL(rtas); struct rtas_suspend_me_data { long waiting; struct rtas_args *args; }; -EXPORT_SYMBOL(rtas); - DEFINE_SPINLOCK(rtas_data_buf_lock); +EXPORT_SYMBOL(rtas_data_buf_lock); + char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned; +EXPORT_SYMBOL(rtas_data_buf); + unsigned long rtas_rmo_buf; /* @@ -106,11 +109,71 @@ static void call_rtas_display_status_delay(char c) } } -void __init udbg_init_rtas(void) +void __init udbg_init_rtas_panel(void) { udbg_putc = call_rtas_display_status_delay; } +#ifdef CONFIG_UDBG_RTAS_CONSOLE + +/* If you think you're dying before early_init_dt_scan_rtas() does its + * work, you can hard code the token values for your firmware here and + * hardcode rtas.base/entry etc. + */ +static unsigned int rtas_putchar_token = RTAS_UNKNOWN_SERVICE; +static unsigned int rtas_getchar_token = RTAS_UNKNOWN_SERVICE; + +static void udbg_rtascon_putc(char c) +{ + int tries; + + if (!rtas.base) + return; + + /* Add CRs before LFs */ + if (c == '\n') + udbg_rtascon_putc('\r'); + + /* if there is more than one character to be displayed, wait a bit */ + for (tries = 0; tries < 16; tries++) { + if (rtas_call(rtas_putchar_token, 1, 1, NULL, c) == 0) + break; + udelay(1000); + } +} + +static int udbg_rtascon_getc_poll(void) +{ + int c; + + if (!rtas.base) + return -1; + + if (rtas_call(rtas_getchar_token, 0, 2, &c)) + return -1; + + return c; +} + +static int udbg_rtascon_getc(void) +{ + int c; + + while ((c = udbg_rtascon_getc_poll()) == -1) + ; + + return c; +} + + +void __init udbg_init_rtas_console(void) +{ + udbg_putc = udbg_rtascon_putc; + udbg_getc = udbg_rtascon_getc; + udbg_getc_poll = udbg_rtascon_getc_poll; +} +#endif /* CONFIG_UDBG_RTAS_CONSOLE */ + void rtas_progress(char *s, unsigned short hex) { struct device_node *root; @@ -236,6 +299,7 @@ int rtas_token(const char *service) tokp = (int *) get_property(rtas.dev, service, NULL); return tokp ? *tokp : RTAS_UNKNOWN_SERVICE; } +EXPORT_SYMBOL(rtas_token); #ifdef CONFIG_RTAS_ERROR_LOGGING /* @@ -328,7 +392,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...) char *buff_copy = NULL; int ret; - if (token == RTAS_UNKNOWN_SERVICE) + if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE) return -1; /* Gotta do something different here, use global lock for now... */ @@ -369,6 +433,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...) } return ret; } +EXPORT_SYMBOL(rtas_call); /* For RTAS_BUSY (-2), delay for 1 millisecond. For an extended busy status * code of 990n, perform the hinted delay of 10^n (last digit) milliseconds. @@ -388,6 +453,7 @@ unsigned int rtas_busy_delay_time(int status) return ms; } +EXPORT_SYMBOL(rtas_busy_delay_time); /* For an RTAS busy status code, perform the hinted delay. */ unsigned int rtas_busy_delay(int status) @@ -401,6 +467,7 @@ unsigned int rtas_busy_delay(int status) return ms; } +EXPORT_SYMBOL(rtas_busy_delay); int rtas_error_rc(int rtas_rc) { @@ -446,6 +513,7 @@ int rtas_get_power_level(int powerdomain, int *level) return rtas_error_rc(rc); return rc; } +EXPORT_SYMBOL(rtas_get_power_level); int rtas_set_power_level(int powerdomain, int level, int *setlevel) { @@ -463,6 +531,7 @@ int rtas_set_power_level(int powerdomain, int level, int *setlevel) return rtas_error_rc(rc); return rc; } +EXPORT_SYMBOL(rtas_set_power_level); int rtas_get_sensor(int sensor, int index, int *state) { @@ -480,6 +549,7 @@ int rtas_get_sensor(int sensor, int index, int *state) return rtas_error_rc(rc); return rc; } +EXPORT_SYMBOL(rtas_get_sensor); int rtas_set_indicator(int indicator, int index, int new_value) { @@ -497,6 +567,7 @@ int rtas_set_indicator(int indicator, int index, int new_value) return rtas_error_rc(rc); return rc; } +EXPORT_SYMBOL(rtas_set_indicator); void rtas_restart(char *cmd) { @@ -791,14 +862,34 @@ void __init rtas_initialize(void) #endif } +int __init early_init_dt_scan_rtas(unsigned long node, + const char *uname, int depth, void *data) +{ + u32 *basep, *entryp, *sizep; -EXPORT_SYMBOL(rtas_token); -EXPORT_SYMBOL(rtas_call); -EXPORT_SYMBOL(rtas_data_buf); -EXPORT_SYMBOL(rtas_data_buf_lock); -EXPORT_SYMBOL(rtas_busy_delay_time); -EXPORT_SYMBOL(rtas_busy_delay); -EXPORT_SYMBOL(rtas_get_sensor); -EXPORT_SYMBOL(rtas_get_power_level); -EXPORT_SYMBOL(rtas_set_power_level); -EXPORT_SYMBOL(rtas_set_indicator); + if (depth != 1 || strcmp(uname, "rtas") != 0) + return 0; + + basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL); + entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL); + sizep = of_get_flat_dt_prop(node, "rtas-size", NULL); + + if (basep && entryp && sizep) { + rtas.base = *basep; + rtas.entry = *entryp; + rtas.size = *sizep; + } + +#ifdef CONFIG_UDBG_RTAS_CONSOLE + basep = of_get_flat_dt_prop(node, "put-term-char", NULL); + if (basep) + rtas_putchar_token = *basep; + + basep = of_get_flat_dt_prop(node, "get-term-char", NULL); + if (basep) + rtas_getchar_token = *basep; +#endif + + /* break now */ + return 1; +} diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 78f3a5fd43f6..175539c9afa0 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -149,6 +149,13 @@ early_param("smt-enabled", early_smt_enabled); #define check_smt_enabled() #endif /* CONFIG_SMP */ +/* Put the paca pointer into r13 and SPRG3 */ +void __init setup_paca(int cpu) +{ + local_paca = &paca[cpu]; + mtspr(SPRN_SPRG3, local_paca); +} + /* * Early initialization entry point. This is called by head.S * with MMU translation disabled. We rely on the "feature" of @@ -170,6 +177,9 @@ early_param("smt-enabled", early_smt_enabled); void __init early_setup(unsigned long dt_ptr) { + /* Assume we're on cpu 0 for now. Don't write to the paca yet! */ + setup_paca(0); + /* Enable early debugging if any specified (see udbg.h) */ udbg_early_init(); @@ -183,7 +193,7 @@ void __init early_setup(unsigned long dt_ptr) early_init_devtree(__va(dt_ptr)); /* Now we know the logical id of our boot cpu, setup the paca. */ - setup_boot_paca(); + setup_paca(boot_cpuid); /* Fix up paca fields required for the boot cpu */ get_paca()->cpu_start = 1; @@ -350,19 +360,11 @@ void __init setup_system(void) */ unflatten_device_tree(); -#ifdef CONFIG_KEXEC - kexec_setup(); /* requires unflattened device tree. */ -#endif - /* * Fill the ppc64_caches & systemcfg structures with informations * retrieved from the device-tree. Need to be called before * finish_device_tree() since the later requires some of the - * informations filled up here to properly parse the interrupt - * tree. - * It also sets up the cache line sizes which allows to call - * routines like flush_icache_range (used by the hash init - * later on). + * informations filled up here to properly parse the interrupt tree. */ initialize_cache_info(); diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 52f5659534f4..fa6bd97b6b9d 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -52,9 +52,13 @@ #include <asm/firmware.h> #include <asm/processor.h> #endif +#include <asm/kexec.h> #ifdef CONFIG_PPC64 /* XXX */ #define _IO_BASE pci_io_base +#ifdef CONFIG_KEXEC +cpumask_t cpus_in_sr = CPU_MASK_NONE; +#endif #endif #ifdef CONFIG_DEBUGGER @@ -97,7 +101,7 @@ static DEFINE_SPINLOCK(die_lock); int die(const char *str, struct pt_regs *regs, long err) { - static int die_counter, crash_dump_start = 0; + static int die_counter; if (debugger(regs)) return 1; @@ -137,21 +141,12 @@ int die(const char *str, struct pt_regs *regs, long err) print_modules(); show_regs(regs); bust_spinlocks(0); + spin_unlock_irq(&die_lock); - if (!crash_dump_start && kexec_should_crash(current)) { - crash_dump_start = 1; - spin_unlock_irq(&die_lock); + if (kexec_should_crash(current) || + kexec_sr_activated(smp_processor_id())) crash_kexec(regs); - /* NOTREACHED */ - } - spin_unlock_irq(&die_lock); - if (crash_dump_start) - /* - * Only for soft-reset: Other CPUs will be responded to an IPI - * sent by first kexec CPU. - */ - for(;;) - ; + crash_kexec_secondary(regs); if (in_interrupt()) panic("Fatal exception in interrupt"); @@ -215,6 +210,10 @@ void system_reset_exception(struct pt_regs *regs) return; } +#ifdef CONFIG_KEXEC + cpu_set(smp_processor_id(), cpus_in_sr); +#endif + die("System Reset", regs, SIGABRT); /* Must die if the interrupt is not recoverable */ diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 67d9fd9ae2b5..759afd5e0d8a 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -34,9 +34,12 @@ void __init udbg_early_init(void) #elif defined(CONFIG_PPC_EARLY_DEBUG_G5) /* For use on Apple G5 machines */ udbg_init_pmac_realmode(); -#elif defined(CONFIG_PPC_EARLY_DEBUG_RTAS) +#elif defined(CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL) /* RTAS panel debug */ - udbg_init_rtas(); + udbg_init_rtas_panel(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE) + /* RTAS console debug */ + udbg_init_rtas_console(); #elif defined(CONFIG_PPC_EARLY_DEBUG_MAPLE) /* Maple real mode debug */ udbg_init_maple_realmode(); diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index a0f3cbd00d39..c90f124f3c71 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -520,7 +520,7 @@ static inline int tlb_batching_enabled(void) } #endif -void hpte_init_native(void) +void __init hpte_init_native(void) { ppc_md.hpte_invalidate = native_hpte_invalidate; ppc_md.hpte_updatepp = native_hpte_updatepp; @@ -530,5 +530,4 @@ void hpte_init_native(void) ppc_md.hpte_clear_all = native_hpte_clear; if (tlb_batching_enabled()) ppc_md.flush_hash_range = native_flush_hash_range; - htab_finish_init(); } diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index d03fd2b4445e..3cc6d68f7117 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -167,34 +167,12 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, hash = hpt_hash(va, shift); hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); - /* The crap below can be cleaned once ppd_md.probe() can - * set up the hash callbacks, thus we can just used the - * normal insert callback here. - */ -#ifdef CONFIG_PPC_ISERIES - if (machine_is(iseries)) - ret = iSeries_hpte_insert(hpteg, va, - paddr, - tmp_mode, - HPTE_V_BOLTED, - psize); - else -#endif -#ifdef CONFIG_PPC_PSERIES - if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) - ret = pSeries_lpar_hpte_insert(hpteg, va, - paddr, - tmp_mode, - HPTE_V_BOLTED, - psize); - else -#endif -#ifdef CONFIG_PPC_MULTIPLATFORM - ret = native_hpte_insert(hpteg, va, - paddr, - tmp_mode, HPTE_V_BOLTED, - psize); -#endif + DBG("htab_bolt_mapping: calling %p\n", ppc_md.hpte_insert); + + BUG_ON(!ppc_md.hpte_insert); + ret = ppc_md.hpte_insert(hpteg, va, paddr, + tmp_mode, HPTE_V_BOLTED, psize); + if (ret < 0) break; } @@ -413,6 +391,41 @@ void create_section_mapping(unsigned long start, unsigned long end) } #endif /* CONFIG_MEMORY_HOTPLUG */ +static inline void make_bl(unsigned int *insn_addr, void *func) +{ + unsigned long funcp = *((unsigned long *)func); + int offset = funcp - (unsigned long)insn_addr; + + *insn_addr = (unsigned int)(0x48000001 | (offset & 0x03fffffc)); + flush_icache_range((unsigned long)insn_addr, 4+ + (unsigned long)insn_addr); +} + +static void __init htab_finish_init(void) +{ + extern unsigned int *htab_call_hpte_insert1; + extern unsigned int *htab_call_hpte_insert2; + extern unsigned int *htab_call_hpte_remove; + extern unsigned int *htab_call_hpte_updatepp; + +#ifdef CONFIG_PPC_64K_PAGES + extern unsigned int *ht64_call_hpte_insert1; + extern unsigned int *ht64_call_hpte_insert2; + extern unsigned int *ht64_call_hpte_remove; + extern unsigned int *ht64_call_hpte_updatepp; + + make_bl(ht64_call_hpte_insert1, ppc_md.hpte_insert); + make_bl(ht64_call_hpte_insert2, ppc_md.hpte_insert); + make_bl(ht64_call_hpte_remove, ppc_md.hpte_remove); + make_bl(ht64_call_hpte_updatepp, ppc_md.hpte_updatepp); +#endif /* CONFIG_PPC_64K_PAGES */ + + make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert); + make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert); + make_bl(htab_call_hpte_remove, ppc_md.hpte_remove); + make_bl(htab_call_hpte_updatepp, ppc_md.hpte_updatepp); +} + void __init htab_initialize(void) { unsigned long table; @@ -525,6 +538,8 @@ void __init htab_initialize(void) mmu_linear_psize)); } + htab_finish_init(); + DBG(" <- htab_initialize()\n"); } #undef KB @@ -787,16 +802,6 @@ void flush_hash_range(unsigned long number, int local) } } -static inline void make_bl(unsigned int *insn_addr, void *func) -{ - unsigned long funcp = *((unsigned long *)func); - int offset = funcp - (unsigned long)insn_addr; - - *insn_addr = (unsigned int)(0x48000001 | (offset & 0x03fffffc)); - flush_icache_range((unsigned long)insn_addr, 4+ - (unsigned long)insn_addr); -} - /* * low_hash_fault is called when we the low level hash code failed * to instert a PTE due to an hypervisor error @@ -815,28 +820,3 @@ void low_hash_fault(struct pt_regs *regs, unsigned long address) } bad_page_fault(regs, address, SIGBUS); } - -void __init htab_finish_init(void) -{ - extern unsigned int *htab_call_hpte_insert1; - extern unsigned int *htab_call_hpte_insert2; - extern unsigned int *htab_call_hpte_remove; - extern unsigned int *htab_call_hpte_updatepp; - -#ifdef CONFIG_PPC_64K_PAGES - extern unsigned int *ht64_call_hpte_insert1; - extern unsigned int *ht64_call_hpte_insert2; - extern unsigned int *ht64_call_hpte_remove; - extern unsigned int *ht64_call_hpte_updatepp; - - make_bl(ht64_call_hpte_insert1, ppc_md.hpte_insert); - make_bl(ht64_call_hpte_insert2, ppc_md.hpte_insert); - make_bl(ht64_call_hpte_remove, ppc_md.hpte_remove); - make_bl(ht64_call_hpte_updatepp, ppc_md.hpte_updatepp); -#endif /* CONFIG_PPC_64K_PAGES */ - - make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert); - make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert); - make_bl(htab_call_hpte_remove, ppc_md.hpte_remove); - make_bl(htab_call_hpte_updatepp, ppc_md.hpte_updatepp); -} diff --git a/arch/powerpc/mm/mmu_context_64.c b/arch/powerpc/mm/mmu_context_64.c index 65d18dca266f..e2051efa09c5 100644 --- a/arch/powerpc/mm/mmu_context_64.c +++ b/arch/powerpc/mm/mmu_context_64.c @@ -44,7 +44,9 @@ again: return err; if (index > MAX_CONTEXT) { + spin_lock(&mmu_context_lock); idr_remove(&mmu_context_idr, index); + spin_unlock(&mmu_context_lock); return -ENOMEM; } diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 3a87863d2876..d1ecc0f9ab58 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -7,6 +7,7 @@ choice config MPC8641_HPCN bool "Freescale MPC8641 HPCN" + select PPC_I8259 help This option enables support for the MPC8641 HPCN board. @@ -28,9 +29,4 @@ config PPC_INDIRECT_PCI_BE depends on PPC_86xx default y -config PPC_STD_MMU - bool - depends on PPC_86xx - default y - endmenu diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index 7be796c5d5c9..476a6eeee710 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -2,9 +2,6 @@ # Makefile for the PowerPC 86xx linux kernel. # - -ifeq ($(CONFIG_PPC_86xx),y) obj-$(CONFIG_SMP) += mpc86xx_smp.o -endif obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o obj-$(CONFIG_PCI) += pci.o mpc86xx_pcie.o diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h index 5042253758b7..5d2bcf78cef7 100644 --- a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h +++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h @@ -14,7 +14,6 @@ #ifndef __MPC8641_HPCN_H__ #define __MPC8641_HPCN_H__ -#include <linux/config.h> #include <linux/init.h> /* PCI interrupt controller */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h index e3c9e4f417d3..2834462590b8 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx.h +++ b/arch/powerpc/platforms/86xx/mpc86xx.h @@ -15,11 +15,13 @@ * mpc86xx_* files. Mostly for use by mpc86xx_setup(). */ -extern int __init add_bridge(struct device_node *dev); +extern int add_bridge(struct device_node *dev); -extern void __init setup_indirect_pcie(struct pci_controller *hose, +extern int mpc86xx_exclude_device(u_char bus, u_char devfn); + +extern void setup_indirect_pcie(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data); -extern void __init setup_indirect_pcie_nomap(struct pci_controller *hose, +extern void setup_indirect_pcie_nomap(struct pci_controller *hose, void __iomem *cfg_addr, void __iomem *cfg_data); diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 483c21df181e..ebae73eb0063 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -12,7 +12,6 @@ * option) any later version. */ -#include <linux/config.h> #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/pci.h> @@ -36,6 +35,7 @@ #include <sysdev/fsl_soc.h> #include "mpc86xx.h" +#include "mpc8641_hpcn.h" #ifndef CONFIG_PCI unsigned long isa_io_base = 0; @@ -186,17 +186,130 @@ mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET; } +static void __devinit quirk_ali1575(struct pci_dev *dev) +{ + unsigned short temp; + + /* + * ALI1575 interrupts route table setup: + * + * IRQ pin IRQ# + * PIRQA ---- 3 + * PIRQB ---- 4 + * PIRQC ---- 5 + * PIRQD ---- 6 + * PIRQE ---- 9 + * PIRQF ---- 10 + * PIRQG ---- 11 + * PIRQH ---- 12 + * + * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD + * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA + */ + pci_write_config_dword(dev, 0x48, 0xb9317542); + + /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ + pci_write_config_byte(dev, 0x86, 0x0c); + + /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ + pci_write_config_byte(dev, 0x87, 0x0d); + + /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ + pci_write_config_byte(dev, 0x88, 0x0f); + + /* USB 2.0 controller, interrupt: PIRQ7 */ + pci_write_config_byte(dev, 0x74, 0x06); + + /* Audio controller, interrupt: PIRQE */ + pci_write_config_byte(dev, 0x8a, 0x0c); + + /* Modem controller, interrupt: PIRQF */ + pci_write_config_byte(dev, 0x8b, 0x0d); + + /* HD audio controller, interrupt: PIRQG */ + pci_write_config_byte(dev, 0x8c, 0x0e); + + /* Serial ATA interrupt: PIRQD */ + pci_write_config_byte(dev, 0x8d, 0x0b); + + /* SMB interrupt: PIRQH */ + pci_write_config_byte(dev, 0x8e, 0x0f); + + /* PMU ACPI SCI interrupt: PIRQH */ + pci_write_config_byte(dev, 0x8f, 0x0f); + + /* Primary PATA IDE IRQ: 14 + * Secondary PATA IDE IRQ: 15 + */ + pci_write_config_byte(dev, 0x44, 0x3d); + pci_write_config_byte(dev, 0x75, 0x0f); + + /* Set IRQ14 and IRQ15 to legacy IRQs */ + pci_read_config_word(dev, 0x46, &temp); + temp |= 0xc000; + pci_write_config_word(dev, 0x46, temp); + + /* Set i8259 interrupt trigger + * IRQ 3: Level + * IRQ 4: Level + * IRQ 5: Level + * IRQ 6: Level + * IRQ 7: Level + * IRQ 9: Level + * IRQ 10: Level + * IRQ 11: Level + * IRQ 12: Level + * IRQ 14: Edge + * IRQ 15: Edge + */ + outb(0xfa, 0x4d0); + outb(0x1e, 0x4d1); +} -int -mpc86xx_exclude_device(u_char bus, u_char devfn) +static void __devinit quirk_uli5288(struct pci_dev *dev) { -#if !defined(CONFIG_PCI) - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; -#endif + unsigned char c; + + pci_read_config_byte(dev,0x83,&c); + c |= 0x80; + pci_write_config_byte(dev, 0x83, c); + + pci_write_config_byte(dev, 0x09, 0x01); + pci_write_config_byte(dev, 0x0a, 0x06); + + pci_read_config_byte(dev,0x83,&c); + c &= 0x7f; + pci_write_config_byte(dev, 0x83, c); - return PCIBIOS_SUCCESSFUL; + pci_read_config_byte(dev,0x84,&c); + c |= 0x01; + pci_write_config_byte(dev, 0x84, c); } + +static void __devinit quirk_uli5229(struct pci_dev *dev) +{ + unsigned short temp; + pci_write_config_word(dev, 0x04, 0x0405); + pci_read_config_word(dev, 0x4a, &temp); + temp |= 0x1000; + pci_write_config_word(dev, 0x4a, temp); +} + +static void __devinit early_uli5249(struct pci_dev *dev) +{ + unsigned char temp; + pci_write_config_word(dev, 0x04, 0x0007); + pci_read_config_byte(dev, 0x7c, &temp); + pci_write_config_byte(dev, 0x7c, 0x80); + pci_write_config_byte(dev, 0x09, 0x01); + pci_write_config_byte(dev, 0x7c, temp); + dev->class |= 0x1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); #endif /* CONFIG_PCI */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c index 944ec4b71416..bb7fb41933ad 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -10,7 +10,6 @@ * option) any later version. */ -#include <linux/config.h> #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/init.h> @@ -34,8 +33,8 @@ extern unsigned long __secondary_hold_acknowledge; static void __init smp_86xx_release_core(int nr) { - void *mcm_vaddr; - unsigned long vaddr, pcr; + __be32 __iomem *mcm_vaddr; + unsigned long pcr; if (nr < 0 || nr >= NR_CPUS) return; @@ -45,10 +44,9 @@ smp_86xx_release_core(int nr) */ mcm_vaddr = ioremap(get_immrbase() + MPC86xx_MCM_OFFSET, MPC86xx_MCM_SIZE); - vaddr = (unsigned long)mcm_vaddr + MCM_PORT_CONFIG_OFFSET; - pcr = in_be32((volatile unsigned *)vaddr); + pcr = in_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2)); pcr |= 1 << (nr + 24); - out_be32((volatile unsigned *)vaddr, pcr); + out_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2), pcr); } diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c index 5180df7c75bc..bc5139043112 100644 --- a/arch/powerpc/platforms/86xx/pci.c +++ b/arch/powerpc/platforms/86xx/pci.c @@ -12,7 +12,6 @@ * option) any later version. */ -#include <linux/config.h> #include <linux/types.h> #include <linux/module.h> #include <linux/init.h> @@ -122,15 +121,12 @@ static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource static void __init mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size) { - volatile struct ccsr_pex *pcie; u16 cmd; unsigned int temps; DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n", pcie_offset, pcie_size); - pcie = ioremap(pcie_offset, pcie_size); - early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO; @@ -144,6 +140,14 @@ mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size) early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps); } +int mpc86xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + int __init add_bridge(struct device_node *dev) { int len; @@ -198,128 +202,3 @@ int __init add_bridge(struct device_node *dev) return 0; } - -static void __devinit quirk_ali1575(struct pci_dev *dev) -{ - unsigned short temp; - - /* - * ALI1575 interrupts route table setup: - * - * IRQ pin IRQ# - * PIRQA ---- 3 - * PIRQB ---- 4 - * PIRQC ---- 5 - * PIRQD ---- 6 - * PIRQE ---- 9 - * PIRQF ---- 10 - * PIRQG ---- 11 - * PIRQH ---- 12 - * - * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD - * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA - */ - pci_write_config_dword(dev, 0x48, 0xb9317542); - - /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x86, 0x0c); - - /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x87, 0x0d); - - /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ - pci_write_config_byte(dev, 0x88, 0x0f); - - /* USB 2.0 controller, interrupt: PIRQ7 */ - pci_write_config_byte(dev, 0x74, 0x06); - - /* Audio controller, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x8a, 0x0c); - - /* Modem controller, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x8b, 0x0d); - - /* HD audio controller, interrupt: PIRQG */ - pci_write_config_byte(dev, 0x8c, 0x0e); - - /* Serial ATA interrupt: PIRQD */ - pci_write_config_byte(dev, 0x8d, 0x0b); - - /* SMB interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8e, 0x0f); - - /* PMU ACPI SCI interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8f, 0x0f); - - /* Primary PATA IDE IRQ: 14 - * Secondary PATA IDE IRQ: 15 - */ - pci_write_config_byte(dev, 0x44, 0x3d); - pci_write_config_byte(dev, 0x75, 0x0f); - - /* Set IRQ14 and IRQ15 to legacy IRQs */ - pci_read_config_word(dev, 0x46, &temp); - temp |= 0xc000; - pci_write_config_word(dev, 0x46, temp); - - /* Set i8259 interrupt trigger - * IRQ 3: Level - * IRQ 4: Level - * IRQ 5: Level - * IRQ 6: Level - * IRQ 7: Level - * IRQ 9: Level - * IRQ 10: Level - * IRQ 11: Level - * IRQ 12: Level - * IRQ 14: Edge - * IRQ 15: Edge - */ - outb(0xfa, 0x4d0); - outb(0x1e, 0x4d1); -} - -static void __devinit quirk_uli5288(struct pci_dev *dev) -{ - unsigned char c; - - pci_read_config_byte(dev,0x83,&c); - c |= 0x80; - pci_write_config_byte(dev, 0x83, c); - - pci_write_config_byte(dev, 0x09, 0x01); - pci_write_config_byte(dev, 0x0a, 0x06); - - pci_read_config_byte(dev,0x83,&c); - c &= 0x7f; - pci_write_config_byte(dev, 0x83, c); - - pci_read_config_byte(dev,0x84,&c); - c |= 0x01; - pci_write_config_byte(dev, 0x84, c); -} - -static void __devinit quirk_uli5229(struct pci_dev *dev) -{ - unsigned short temp; - pci_write_config_word(dev, 0x04, 0x0405); - pci_read_config_word(dev, 0x4a, &temp); - temp |= 0x1000; - pci_write_config_word(dev, 0x4a, temp); -} - -static void __devinit early_uli5249(struct pci_dev *dev) -{ - unsigned char temp; - pci_write_config_word(dev, 0x04, 0x0007); - pci_read_config_byte(dev, 0x7c, &temp); - pci_write_config_byte(dev, 0x7c, 0x80); - pci_write_config_byte(dev, 0x09, 0x01); - pci_write_config_byte(dev, 0x7c, temp); - dev->class |= 0x1; -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 292863694562..5cf46dc57895 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -14,3 +14,4 @@ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ obj-$(CONFIG_PPC_CELL) += cell/ +obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/ diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 352bbbacde9a..0c8c7b6ab897 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -6,6 +6,7 @@ config SPU_FS default m depends on PPC_CELL select SPU_BASE + select MEMORY_HOTPLUG help The SPU file system is used to access Synergistic Processing Units on machines implementing the Broadband Processor @@ -18,7 +19,6 @@ config SPU_BASE config SPUFS_MMAP bool depends on SPU_FS && SPARSEMEM - select MEMORY_HOTPLUG default y config CBE_RAS diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 3d1831d331e5..00d112f92272 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -125,8 +125,6 @@ static void __init cell_init_early(void) { DBG(" -> cell_init_early()\n"); - hpte_init_native(); - cell_init_iommu(); ppc64_interrupt_controller = IC_CELL_PIC; @@ -139,11 +137,17 @@ static int __init cell_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "IBM,CBEA") || - of_flat_dt_is_compatible(root, "IBM,CPBW-1.0")) - return 1; + if (!of_flat_dt_is_compatible(root, "IBM,CBEA") && + !of_flat_dt_is_compatible(root, "IBM,CPBW-1.0")) + return 0; + +#ifdef CONFIG_UDBG_RTAS_CONSOLE + udbg_init_rtas_console(); +#endif + + hpte_init_native(); - return 0; + return 1; } /* diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index db82f503ba2c..b306723abb87 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -168,12 +168,12 @@ spu_irq_class_0_bottom(struct spu *spu) stat &= mask; - if (stat & 1) /* invalid MFC DMA */ - __spu_trap_invalid_dma(spu); - - if (stat & 2) /* invalid DMA alignment */ + if (stat & 1) /* invalid DMA alignment */ __spu_trap_dma_align(spu); + if (stat & 2) /* invalid MFC DMA */ + __spu_trap_invalid_dma(spu); + if (stat & 4) /* error on SPU */ __spu_trap_error(spu); diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 7854a380dce2..58e794f9da1b 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -204,7 +204,7 @@ static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_flags |= VM_RESERVED; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); + | _PAGE_NO_CACHE | _PAGE_GUARDED); vma->vm_ops = &spufs_cntl_mmap_vmops; return 0; @@ -675,7 +675,7 @@ static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_flags |= VM_RESERVED; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); + | _PAGE_NO_CACHE | _PAGE_GUARDED); vma->vm_ops = &spufs_signal1_mmap_vmops; return 0; @@ -762,7 +762,7 @@ static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) /* FIXME: */ vma->vm_flags |= VM_RESERVED; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); + | _PAGE_NO_CACHE | _PAGE_GUARDED); vma->vm_ops = &spufs_signal2_mmap_vmops; return 0; @@ -850,7 +850,7 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_flags |= VM_RESERVED; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); + | _PAGE_NO_CACHE | _PAGE_GUARDED); vma->vm_ops = &spufs_mss_mmap_vmops; return 0; @@ -899,7 +899,7 @@ static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_flags |= VM_RESERVED; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); + | _PAGE_NO_CACHE | _PAGE_GUARDED); vma->vm_ops = &spufs_mfc_mmap_vmops; return 0; diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index a656d810a44a..c7fea2cca534 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -464,7 +464,8 @@ static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu) * Poll MFC_CNTL[Ps] until value '11' is read * (purge complete). */ - POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) & + POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) & + MFC_CNTL_PURGE_DMA_STATUS_MASK) == MFC_CNTL_PURGE_DMA_COMPLETE); } @@ -1028,7 +1029,8 @@ static inline void wait_suspend_mfc_complete(struct spu_state *csa, * Restore, Step 47. * Poll MFC_CNTL[Ss] until 11 is returned. */ - POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) & + POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) & + MFC_CNTL_SUSPEND_DMA_STATUS_MASK) == MFC_CNTL_SUSPEND_COMPLETE); } diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 4fdbc9ae876b..ba07a9a7c039 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -74,6 +74,16 @@ config SANDPOINT Select SANDPOINT if configuring for a Motorola Sandpoint X3 (any flavor). +config MPC7448HPC2 + bool "Freescale MPC7448HPC2(Taiga)" + select TSI108_BRIDGE + select DEFAULT_UIMAGE + select PPC_UDBG_16550 + select MPIC + help + Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga) + platform + config RADSTONE_PPC7D bool "Radstone Technology PPC7D board" select PPC_I8259 @@ -221,6 +231,11 @@ config MV64X60 select PPC_INDIRECT_PCI default y +config TSI108_BRIDGE + bool + depends on MPC7448HPC2 + default y + menu "Set bridge options" depends on MV64X60 diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile new file mode 100644 index 000000000000..fa499fe59291 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/Makefile @@ -0,0 +1,4 @@ +# +# Makefile for the 6xx/7xx/7xxxx linux kernel. +# +obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c new file mode 100644 index 000000000000..d7a4fc7ca238 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -0,0 +1,335 @@ +/* + * mpc7448_hpc2.c + * + * Board setup routines for the Freescale Taiga platform + * + * Author: Jacob Pan + * jacob.pan@freescale.com + * Author: Xianghua Xiao + * x.xiao@freescale.com + * Maintainer: Roy Zang <tie-fei.zang@freescale.com> + * Add Flat Device Tree support fot mpc7448hpc2 board + * + * Copyright 2004-2006 Freescale Semiconductor, Inc. + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/ide.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_core.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/tsi108.h> +#include <asm/pci-bridge.h> +#include <asm/reg.h> +#include <mm/mmu_decl.h> +#include "mpc7448_hpc2.h" +#include <asm/tsi108_irq.h> +#include <asm/mpic.h> + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) do { printk(fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + +#ifndef CONFIG_PCI +isa_io_base = MPC7448_HPC2_ISA_IO_BASE; +isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE; +pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET; +#endif + +extern int tsi108_setup_pci(struct device_node *dev); +extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); +extern void tsi108_pci_int_init(void); +extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused); + +/* + * Define all of the IRQ senses and polarities. Taken from the + * mpc7448hpc manual. + * Note: Likely, this table and the following function should be + * obtained and derived from the OF Device Tree. + */ + +static u_char mpc7448_hpc2_pic_initsenses[] __initdata = { + /* External on-board sources */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */ + /* Internal Tsi108/109 interrupt sources */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */ +}; + +int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +/* + * find pci slot by devfn in interrupt map of OF tree + */ +u8 find_slot_by_devfn(unsigned int *interrupt_map, unsigned int devfn) +{ + int i; + unsigned int tmp; + for (i = 0; i < 4; i++){ + tmp = interrupt_map[i*4*7]; + if ((tmp >> 11) == (devfn >> 3)) + return i; + } + return i; +} + +/* + * Scans the interrupt map for pci device + */ +void mpc7448_hpc2_fixup_irq(struct pci_dev *dev) +{ + struct pci_controller *hose; + struct device_node *node; + unsigned int *interrupt; + int busnr; + int len; + u8 slot; + u8 pin; + + /* Lookup the hose */ + busnr = dev->bus->number; + hose = pci_bus_to_hose(busnr); + if (!hose) + printk(KERN_ERR "No pci hose found\n"); + + /* Check it has an OF node associated */ + node = (struct device_node *) hose->arch_data; + if (!node) + printk(KERN_ERR "No pci node found\n"); + + interrupt = (unsigned int *) get_property(node, "interrupt-map", &len); + slot = find_slot_by_devfn(interrupt, dev->devfn); + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (pin == 0 || pin > 4) + pin = 1; + pin--; + dev->irq = interrupt[slot*4*7 + pin*7 + 5]; + DBG("TSI_PCI: dev->irq = 0x%x\n", dev->irq); +} +/* temporary pci irq map fixup*/ + +void __init mpc7448_hpc2_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + for_each_pci_dev(dev) { + mpc7448_hpc2_fixup_irq(dev); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } +} + +static void __init mpc7448_hpc2_setup_arch(void) +{ + struct device_node *cpu; + struct device_node *np; + if (ppc_md.progress) + ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0); + + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != 0) { + unsigned int *fp; + + fp = (int *)get_property(cpu, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(cpu); + } + tsi108_csr_vir_base = get_vir_csrbase(); + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + ROOT_DEV = Root_RAM0; +#endif + + /* setup PCI host bridge */ +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + tsi108_setup_pci(np); + + ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device; + if (ppc_md.progress) + ppc_md.progress("tsi108: resources set", 0x100); +#endif + + printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n"); + printk(KERN_INFO + "Jointly ported by Freescale and Tundra Semiconductor\n"); + printk(KERN_INFO + "Enabling L2 cache then enabling the HID0 prefetch engine.\n"); +} + +/* + * Interrupt setup and service. Interrrupts on the mpc7448_hpc2 come + * from the four external INT pins, PCI interrupts are routed via + * PCI interrupt control registers, it generates internal IRQ23 + * + * Interrupt routing on the Taiga Board: + * TSI108:PB_INT[0] -> CPU0:INT# + * TSI108:PB_INT[1] -> CPU0:MCP# + * TSI108:PB_INT[2] -> N/C + * TSI108:PB_INT[3] -> N/C + */ +static void __init mpc7448_hpc2_init_IRQ(void) +{ + struct mpic *mpic; + phys_addr_t mpic_paddr = 0; + struct device_node *tsi_pic; + + tsi_pic = of_find_node_by_type(NULL, "open-pic"); + if (tsi_pic) { + unsigned int size; + void *prop = get_property(tsi_pic, "reg", &size); + mpic_paddr = of_translate_address(tsi_pic, prop); + } + + if (mpic_paddr == 0) { + printk("%s: No tsi108 PIC found !\n", __FUNCTION__); + return; + } + + DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, + (u32) mpic_paddr); + + mpic = mpic_alloc(mpic_paddr, + MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | + MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108), + 0, /* num_sources used */ + TSI108_IRQ_BASE, + 0, /* num_sources used */ + NR_IRQS - 4 /* XXXX */, + mpc7448_hpc2_pic_initsenses, + sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC"); + + BUG_ON(mpic == NULL); /* XXXX */ + + mpic_init(mpic); + mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic); + tsi108_pci_int_init(); + + /* Configure MPIC outputs to CPU0 */ + tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); +} + +void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: Freescale Semiconductor\n"); + seq_printf(m, "machine\t\t: MPC7448hpc2\n"); +} + +void mpc7448_hpc2_restart(char *cmd) +{ + local_irq_disable(); + + /* Set exception prefix high - to the firmware */ + _nmask_and_or_msr(0, MSR_IP); + + for (;;) ; /* Spin until reset happens */ +} + +void mpc7448_hpc2_power_off(void) +{ + local_irq_disable(); + for (;;) ; /* No way to shut power off with software */ +} + +void mpc7448_hpc2_halt(void) +{ + mpc7448_hpc2_power_off(); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mpc7448_hpc2_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "mpc74xx")) + return 0; + return 1; +} + +static int mpc7448_machine_check_exception(struct pt_regs *regs) +{ + extern void tsi108_clear_pci_cfg_error(void); + const struct exception_table_entry *entry; + + /* Are we prepared to handle this fault */ + if ((entry = search_exception_tables(regs->nip)) != NULL) { + tsi108_clear_pci_cfg_error(); + regs->msr |= MSR_RI; + regs->nip = entry->fixup; + return 1; + } + return 0; + +} +define_machine(mpc7448_hpc2){ + .name = "MPC7448 HPC2", + .probe = mpc7448_hpc2_probe, + .setup_arch = mpc7448_hpc2_setup_arch, + .init_IRQ = mpc7448_hpc2_init_IRQ, + .show_cpuinfo = mpc7448_hpc2_show_cpuinfo, + .get_irq = mpic_get_irq, + .pcibios_fixup = mpc7448_hpc2_pcibios_fixup, + .restart = mpc7448_hpc2_restart, + .calibrate_decr = generic_calibrate_decr, + .machine_check_exception= mpc7448_machine_check_exception, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h new file mode 100644 index 000000000000..a543a5242e34 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h @@ -0,0 +1,26 @@ +/* + * mpc7448_hpc2.h + * + * Definitions for Freescale MPC7448_HPC2 platform + * + * Author: Jacob Pan + * jacob.pan@freescale.com + * Maintainer: Roy Zang <roy.zang@freescale.com> + * + * 2006 (c) Freescale Semiconductor, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __PPC_PLATFORMS_MPC7448_HPC2_H +#define __PPC_PLATFORMS_MPC7448_HPC2_H + +#include <asm/ppcboot.h> + +/* Base Addresses for the PCI bus + */ +#define MPC7448_HPC2_PCI_MEM_OFFSET (0x00000000) +#define MPC7448_HPC2_ISA_IO_BASE (0x00000000) +#define MPC7448_HPC2_ISA_MEM_BASE (0x00000000) +#endif /* __PPC_PLATFORMS_MPC7448_HPC2_H */ diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c index d3444aabe76e..d194140c1ebf 100644 --- a/arch/powerpc/platforms/iseries/dt.c +++ b/arch/powerpc/platforms/iseries/dt.c @@ -252,6 +252,7 @@ static void __init dt_model(struct iseries_flat_dt *dt) { char buf[16] = "IBM,"; + /* N.B. lparcfg.c knows about the "IBM," prefixes ... */ /* "IBM," + mfgId[2:3] + systemSerial[1:5] */ strne2a(buf + 4, xItExtVpdPanel.mfgID + 2, 2); strne2a(buf + 6, xItExtVpdPanel.systemSerial + 1, 5); @@ -264,6 +265,7 @@ static void __init dt_model(struct iseries_flat_dt *dt) dt_prop_str(dt, "model", buf); dt_prop_str(dt, "compatible", "IBM,iSeries"); + dt_prop_u32(dt, "ibm,partition-no", HvLpConfig_getLpIndex()); } static void __init dt_do_vdevice(struct iseries_flat_dt *dt, diff --git a/arch/powerpc/platforms/iseries/htab.c b/arch/powerpc/platforms/iseries/htab.c index 30bdcf3925d9..ed44dfceaa45 100644 --- a/arch/powerpc/platforms/iseries/htab.c +++ b/arch/powerpc/platforms/iseries/htab.c @@ -242,13 +242,11 @@ static void iSeries_hpte_invalidate(unsigned long slot, unsigned long va, local_irq_restore(flags); } -void hpte_init_iSeries(void) +void __init hpte_init_iSeries(void) { ppc_md.hpte_invalidate = iSeries_hpte_invalidate; ppc_md.hpte_updatepp = iSeries_hpte_updatepp; ppc_md.hpte_updateboltedpp = iSeries_hpte_updateboltedpp; ppc_md.hpte_insert = iSeries_hpte_insert; ppc_md.hpte_remove = iSeries_hpte_remove; - - htab_finish_init(); } diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c index 8ca7b9396355..2a9f81ea27d6 100644 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -51,20 +51,21 @@ static unsigned lpEventHandlerPaths[HvLpEvent_Type_NumTypes]; static struct HvLpEvent * get_next_hvlpevent(void) { struct HvLpEvent * event; - event = (struct HvLpEvent *)hvlpevent_queue.xSlicCurEventPtr; + event = (struct HvLpEvent *)hvlpevent_queue.hq_current_event; if (hvlpevent_is_valid(event)) { /* rmb() needed only for weakly consistent machines (regatta) */ rmb(); /* Set pointer to next potential event */ - hvlpevent_queue.xSlicCurEventPtr += ((event->xSizeMinus1 + - LpEventAlign) / LpEventAlign) * LpEventAlign; + hvlpevent_queue.hq_current_event += ((event->xSizeMinus1 + + IT_LP_EVENT_ALIGN) / IT_LP_EVENT_ALIGN) * + IT_LP_EVENT_ALIGN; /* Wrap to beginning if no room at end */ - if (hvlpevent_queue.xSlicCurEventPtr > - hvlpevent_queue.xSlicLastValidEventPtr) { - hvlpevent_queue.xSlicCurEventPtr = - hvlpevent_queue.xSlicEventStackPtr; + if (hvlpevent_queue.hq_current_event > + hvlpevent_queue.hq_last_event) { + hvlpevent_queue.hq_current_event = + hvlpevent_queue.hq_event_stack; } } else { event = NULL; @@ -82,10 +83,10 @@ int hvlpevent_is_pending(void) if (smp_processor_id() >= spread_lpevents) return 0; - next_event = (struct HvLpEvent *)hvlpevent_queue.xSlicCurEventPtr; + next_event = (struct HvLpEvent *)hvlpevent_queue.hq_current_event; return hvlpevent_is_valid(next_event) || - hvlpevent_queue.xPlicOverflowIntPending; + hvlpevent_queue.hq_overflow_pending; } static void hvlpevent_clear_valid(struct HvLpEvent * event) @@ -95,18 +96,18 @@ static void hvlpevent_clear_valid(struct HvLpEvent * event) * ie. on 64-byte boundaries. */ struct HvLpEvent *tmp; - unsigned extra = ((event->xSizeMinus1 + LpEventAlign) / - LpEventAlign) - 1; + unsigned extra = ((event->xSizeMinus1 + IT_LP_EVENT_ALIGN) / + IT_LP_EVENT_ALIGN) - 1; switch (extra) { case 3: - tmp = (struct HvLpEvent*)((char*)event + 3 * LpEventAlign); + tmp = (struct HvLpEvent*)((char*)event + 3 * IT_LP_EVENT_ALIGN); hvlpevent_invalidate(tmp); case 2: - tmp = (struct HvLpEvent*)((char*)event + 2 * LpEventAlign); + tmp = (struct HvLpEvent*)((char*)event + 2 * IT_LP_EVENT_ALIGN); hvlpevent_invalidate(tmp); case 1: - tmp = (struct HvLpEvent*)((char*)event + 1 * LpEventAlign); + tmp = (struct HvLpEvent*)((char*)event + 1 * IT_LP_EVENT_ALIGN); hvlpevent_invalidate(tmp); } @@ -120,7 +121,7 @@ void process_hvlpevents(struct pt_regs *regs) struct HvLpEvent * event; /* If we have recursed, just return */ - if (!spin_trylock(&hvlpevent_queue.lock)) + if (!spin_trylock(&hvlpevent_queue.hq_lock)) return; for (;;) { @@ -148,17 +149,17 @@ void process_hvlpevents(struct pt_regs *regs) printk(KERN_INFO "Unexpected Lp Event type=%d\n", event->xType ); hvlpevent_clear_valid(event); - } else if (hvlpevent_queue.xPlicOverflowIntPending) + } else if (hvlpevent_queue.hq_overflow_pending) /* * No more valid events. If overflow events are * pending process them */ - HvCallEvent_getOverflowLpEvents(hvlpevent_queue.xIndex); + HvCallEvent_getOverflowLpEvents(hvlpevent_queue.hq_index); else break; } - spin_unlock(&hvlpevent_queue.lock); + spin_unlock(&hvlpevent_queue.hq_lock); } static int set_spread_lpevents(char *str) @@ -184,20 +185,20 @@ void setup_hvlpevent_queue(void) { void *eventStack; - spin_lock_init(&hvlpevent_queue.lock); + spin_lock_init(&hvlpevent_queue.hq_lock); /* Allocate a page for the Event Stack. */ - eventStack = alloc_bootmem_pages(LpEventStackSize); - memset(eventStack, 0, LpEventStackSize); + eventStack = alloc_bootmem_pages(IT_LP_EVENT_STACK_SIZE); + memset(eventStack, 0, IT_LP_EVENT_STACK_SIZE); /* Invoke the hypervisor to initialize the event stack */ - HvCallEvent_setLpEventStack(0, eventStack, LpEventStackSize); + HvCallEvent_setLpEventStack(0, eventStack, IT_LP_EVENT_STACK_SIZE); - hvlpevent_queue.xSlicEventStackPtr = (char *)eventStack; - hvlpevent_queue.xSlicCurEventPtr = (char *)eventStack; - hvlpevent_queue.xSlicLastValidEventPtr = (char *)eventStack + - (LpEventStackSize - LpEventMaxSize); - hvlpevent_queue.xIndex = 0; + hvlpevent_queue.hq_event_stack = eventStack; + hvlpevent_queue.hq_current_event = eventStack; + hvlpevent_queue.hq_last_event = (char *)eventStack + + (IT_LP_EVENT_STACK_SIZE - IT_LP_EVENT_MAX_SIZE); + hvlpevent_queue.hq_index = 0; } /* Register a handler for an LpEvent type */ diff --git a/arch/powerpc/platforms/iseries/proc.c b/arch/powerpc/platforms/iseries/proc.c index e68b6b5fa89f..c241413629ac 100644 --- a/arch/powerpc/platforms/iseries/proc.c +++ b/arch/powerpc/platforms/iseries/proc.c @@ -24,7 +24,6 @@ #include <asm/processor.h> #include <asm/time.h> #include <asm/lppaca.h> -#include <asm/iseries/it_lp_queue.h> #include <asm/iseries/hv_call_xm.h> #include "processor_vpd.h" diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 617c724c4590..66c77e4f8ec2 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -81,8 +81,6 @@ static void iSeries_pci_final_fixup(void) { } #endif extern int rd_size; /* Defined in drivers/block/rd.c */ -extern unsigned long embedded_sysmap_start; -extern unsigned long embedded_sysmap_end; extern unsigned long iSeries_recal_tb; extern unsigned long iSeries_recal_titan; @@ -321,11 +319,6 @@ static void __init iSeries_init_early(void) iSeries_recal_titan = HvCallXm_loadTod(); /* - * Initialize the hash table management pointers - */ - hpte_init_iSeries(); - - /* * Initialize the DMA/TCE management */ iommu_init_early_iSeries(); @@ -563,16 +556,6 @@ static void __init iSeries_fixup_klimit(void) if (naca.xRamDisk) klimit = KERNELBASE + (u64)naca.xRamDisk + (naca.xRamDiskSize * HW_PAGE_SIZE); - else { - /* - * No ram disk was included - check and see if there - * was an embedded system map. Change klimit to take - * into account any embedded system map - */ - if (embedded_sysmap_end) - klimit = KERNELBASE + ((embedded_sysmap_end + 4095) & - 0xfffffffffffff000); - } } static int __init iSeries_src_init(void) @@ -683,6 +666,8 @@ static int __init iseries_probe(void) */ virt_irq_max = 255; + hpte_init_iSeries(); + return 1; } diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index a0505ea48a86..4e32a5417fd1 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -199,11 +199,6 @@ static void __init maple_init_early(void) { DBG(" -> maple_init_early\n"); - /* Initialize hash table, from now on, we can take hash faults - * and call ioremap - */ - hpte_init_native(); - /* Setup interrupt mapping options */ ppc64_interrupt_controller = IC_OPEN_PIC; @@ -272,6 +267,8 @@ static int __init maple_probe(void) */ alloc_dart_table(); + hpte_init_native(); + return 1; } diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 9cc7db7a8bdc..89c5775f83be 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -600,13 +600,6 @@ pmac_halt(void) */ static void __init pmac_init_early(void) { -#ifdef CONFIG_PPC64 - /* Initialize hash table, from now on, we can take hash faults - * and call ioremap - */ - hpte_init_native(); -#endif - /* Enable early btext debug if requested */ if (strstr(cmd_line, "btextdbg")) { udbg_adb_init_early(); @@ -683,6 +676,8 @@ static int __init pmac_probe(void) * part of the cacheable linar mapping */ alloc_dart_table(); + + hpte_init_native(); #endif #ifdef CONFIG_PPC32 diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index d03a8b078f9d..8cfb5706790e 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -92,6 +92,15 @@ static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) *(tcep++) = 0; } +static unsigned long tce_get_pseries(struct iommu_table *tbl, long index) +{ + u64 *tcep; + + index <<= TCE_PAGE_FACTOR; + tcep = ((u64 *)tbl->it_base) + index; + + return *tcep; +} static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages, unsigned long uaddr, @@ -235,6 +244,25 @@ static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long n } } +static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum) +{ + u64 rc; + unsigned long tce_ret; + + tcenum <<= TCE_PAGE_FACTOR; + rc = plpar_tce_get((u64)tbl->it_index, (u64)tcenum << 12, &tce_ret); + + if (rc && printk_ratelimit()) { + printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%ld\n", + rc); + printk("\tindex = 0x%lx\n", (u64)tbl->it_index); + printk("\ttcenum = 0x%lx\n", (u64)tcenum); + show_stack(current, (unsigned long *)__get_SP()); + } + + return tce_ret; +} + static void iommu_table_setparms(struct pci_controller *phb, struct device_node *dn, struct iommu_table *tbl) @@ -254,7 +282,10 @@ static void iommu_table_setparms(struct pci_controller *phb, } tbl->it_base = (unsigned long)__va(*basep); + +#ifndef CONFIG_CRASH_DUMP memset((void *)tbl->it_base, 0, *sizep); +#endif tbl->it_busno = phb->bus->number; @@ -560,11 +591,13 @@ void iommu_init_early_pSeries(void) ppc_md.tce_build = tce_build_pSeriesLP; ppc_md.tce_free = tce_free_pSeriesLP; } + ppc_md.tce_get = tce_get_pSeriesLP; ppc_md.iommu_bus_setup = iommu_bus_setup_pSeriesLP; ppc_md.iommu_dev_setup = iommu_dev_setup_pSeriesLP; } else { ppc_md.tce_build = tce_build_pSeries; ppc_md.tce_free = tce_free_pSeries; + ppc_md.tce_get = tce_get_pseries; ppc_md.iommu_bus_setup = iommu_bus_setup_pSeries; ppc_md.iommu_dev_setup = iommu_dev_setup_pSeries; } diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 634b7d06d3cc..27480705996f 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -513,7 +513,7 @@ void pSeries_lpar_flush_hash_range(unsigned long number, int local) spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags); } -void hpte_init_lpar(void) +void __init hpte_init_lpar(void) { ppc_md.hpte_invalidate = pSeries_lpar_hpte_invalidate; ppc_md.hpte_updatepp = pSeries_lpar_hpte_updatepp; @@ -522,6 +522,4 @@ void hpte_init_lpar(void) ppc_md.hpte_remove = pSeries_lpar_hpte_remove; ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range; ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear; - - htab_finish_init(); } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 1e28518c6121..b3197ff156c6 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -322,11 +322,6 @@ static void __init pSeries_init_early(void) DBG(" -> pSeries_init_early()\n"); fw_feature_init(); - - if (firmware_has_feature(FW_FEATURE_LPAR)) - hpte_init_lpar(); - else - hpte_init_native(); if (firmware_has_feature(FW_FEATURE_LPAR)) find_udbg_vterm(); @@ -384,6 +379,11 @@ static int __init pSeries_probe_hypertas(unsigned long node, if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL) powerpc_firmware_features |= FW_FEATURE_LPAR; + if (firmware_has_feature(FW_FEATURE_LPAR)) + hpte_init_lpar(); + else + hpte_init_native(); + return 1; } diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index cef95b023730..054bd8b41ef5 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -12,3 +12,5 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_PPC_83xx) += ipic.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o +obj-$(CONFIG_PPC_TODC) += todc.o +obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h index c2d05763ccbe..1c8817c4835e 100644 --- a/arch/powerpc/sysdev/dart.h +++ b/arch/powerpc/sysdev/dart.h @@ -47,8 +47,12 @@ /* U4 registers */ #define DART_BASE_U4_BASE_MASK 0xffffff #define DART_BASE_U4_BASE_SHIFT 0 -#define DART_CNTL_U4_FLUSHTLB 0x20000000 #define DART_CNTL_U4_ENABLE 0x80000000 +#define DART_CNTL_U4_IONE 0x40000000 +#define DART_CNTL_U4_FLUSHTLB 0x20000000 +#define DART_CNTL_U4_IDLE 0x10000000 +#define DART_CNTL_U4_PAR_EN 0x08000000 +#define DART_CNTL_U4_IONE_MASK 0x07ffffff #define DART_SIZE_U4_SIZE_MASK 0x1fff #define DART_SIZE_U4_SIZE_SHIFT 0 diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index 6232091cc72b..7c7f34ce4986 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -101,8 +101,8 @@ retry: if (l == (1L << limit)) { if (limit < 4) { limit++; - reg = DART_IN(DART_CNTL); - reg &= ~inv_bit; + reg = DART_IN(DART_CNTL); + reg &= ~inv_bit; DART_OUT(DART_CNTL, reg); goto retry; } else @@ -111,11 +111,39 @@ retry: } } +static inline void dart_tlb_invalidate_one(unsigned long bus_rpn) +{ + unsigned int reg; + unsigned int l, limit; + + reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE | + (bus_rpn & DART_CNTL_U4_IONE_MASK); + DART_OUT(DART_CNTL, reg); + + limit = 0; +wait_more: + l = 0; + while ((DART_IN(DART_CNTL) & DART_CNTL_U4_IONE) && l < (1L << limit)) { + rmb(); + l++; + } + + if (l == (1L << limit)) { + if (limit < 4) { + limit++; + goto wait_more; + } else + panic("DART: TLB did not flush after waiting a long " + "time. Buggy U4 ?"); + } +} + static void dart_flush(struct iommu_table *tbl) { - if (dart_dirty) + if (dart_dirty) { dart_tlb_invalidate_all(); - dart_dirty = 0; + dart_dirty = 0; + } } static void dart_build(struct iommu_table *tbl, long index, @@ -124,6 +152,7 @@ static void dart_build(struct iommu_table *tbl, long index, { unsigned int *dp; unsigned int rpn; + long l; DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr); @@ -135,7 +164,8 @@ static void dart_build(struct iommu_table *tbl, long index, /* On U3, all memory is contigous, so we can move this * out of the loop. */ - while (npages--) { + l = npages; + while (l--) { rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT; *(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK); @@ -143,7 +173,14 @@ static void dart_build(struct iommu_table *tbl, long index, uaddr += DART_PAGE_SIZE; } - dart_dirty = 1; + if (dart_is_u4) { + rpn = index; + mb(); /* make sure all updates have reached memory */ + while (npages--) + dart_tlb_invalidate_one(rpn++); + } else { + dart_dirty = 1; + } } diff --git a/arch/powerpc/sysdev/todc.c b/arch/powerpc/sysdev/todc.c new file mode 100644 index 000000000000..0a65980efb50 --- /dev/null +++ b/arch/powerpc/sysdev/todc.c @@ -0,0 +1,392 @@ +/* + * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818 + * Real Time Clocks/Timekeepers. + * + * Author: Mark A. Greer <mgreer@mvista.com> + * + * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/bcd.h> +#include <linux/mc146818rtc.h> + +#include <asm/machdep.h> +#include <asm/io.h> +#include <asm/time.h> +#include <asm/todc.h> + +/* + * Depending on the hardware on your board and your board design, the + * RTC/NVRAM may be accessed either directly (like normal memory) or via + * address/data registers. If your board uses the direct method, set + * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and + * 'nvram_as1' NULL. If your board uses address/data regs to access nvram, + * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the + * address of the upper byte (leave NULL if using mc146818), and set + * 'nvram_data' to the address of the 8-bit data register. + * + * Note: Even though the documentation for the various RTC chips say that it + * take up to a second before it starts updating once the 'R' bit is + * cleared, they always seem to update even though we bang on it many + * times a second. This is true, except for the Dallas Semi 1746/1747 + * (possibly others). Those chips seem to have a real problem whenever + * we set the 'R' bit before reading them, they basically stop counting. + * --MAG + */ + +/* + * 'todc_info' should be initialized in your *_setup.c file to + * point to a fully initialized 'todc_info_t' structure. + * This structure holds all the register offsets for your particular + * TODC/RTC chip. + * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you. + */ + +#ifdef RTC_FREQ_SELECT +#undef RTC_FREQ_SELECT +#define RTC_FREQ_SELECT control_b /* Register A */ +#endif + +#ifdef RTC_CONTROL +#undef RTC_CONTROL +#define RTC_CONTROL control_a /* Register B */ +#endif + +#ifdef RTC_INTR_FLAGS +#undef RTC_INTR_FLAGS +#define RTC_INTR_FLAGS watchdog /* Register C */ +#endif + +#ifdef RTC_VALID +#undef RTC_VALID +#define RTC_VALID interrupts /* Register D */ +#endif + +/* Access routines when RTC accessed directly (like normal memory) */ +u_char +todc_direct_read_val(int addr) +{ + return readb((void __iomem *)(todc_info->nvram_data + addr)); +} + +void +todc_direct_write_val(int addr, unsigned char val) +{ + writeb(val, (void __iomem *)(todc_info->nvram_data + addr)); + return; +} + +/* Access routines for accessing m48txx type chips via addr/data regs */ +u_char +todc_m48txx_read_val(int addr) +{ + outb(addr, todc_info->nvram_as0); + outb(addr>>todc_info->as0_bits, todc_info->nvram_as1); + return inb(todc_info->nvram_data); +} + +void +todc_m48txx_write_val(int addr, unsigned char val) +{ + outb(addr, todc_info->nvram_as0); + outb(addr>>todc_info->as0_bits, todc_info->nvram_as1); + outb(val, todc_info->nvram_data); + return; +} + +/* Access routines for accessing mc146818 type chips via addr/data regs */ +u_char +todc_mc146818_read_val(int addr) +{ + outb_p(addr, todc_info->nvram_as0); + return inb_p(todc_info->nvram_data); +} + +void +todc_mc146818_write_val(int addr, unsigned char val) +{ + outb_p(addr, todc_info->nvram_as0); + outb_p(val, todc_info->nvram_data); +} + + +/* + * Routines to make RTC chips with NVRAM buried behind an addr/data pair + * have the NVRAM and clock regs appear at the same level. + * The NVRAM will appear to start at addr 0 and the clock regs will appear + * to start immediately after the NVRAM (actually, start at offset + * todc_info->nvram_size). + */ +static inline u_char +todc_read_val(int addr) +{ + u_char val; + + if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) { + if (addr < todc_info->nvram_size) { /* NVRAM */ + ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr); + val = ppc_md.rtc_read_val(todc_info->nvram_data_reg); + } else { /* Clock Reg */ + addr -= todc_info->nvram_size; + val = ppc_md.rtc_read_val(addr); + } + } else + val = ppc_md.rtc_read_val(addr); + + return val; +} + +static inline void +todc_write_val(int addr, u_char val) +{ + if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) { + if (addr < todc_info->nvram_size) { /* NVRAM */ + ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr); + ppc_md.rtc_write_val(todc_info->nvram_data_reg, val); + } else { /* Clock Reg */ + addr -= todc_info->nvram_size; + ppc_md.rtc_write_val(addr, val); + } + } else + ppc_md.rtc_write_val(addr, val); +} + +/* + * TODC routines + * + * There is some ugly stuff in that there are assumptions for the mc146818. + * + * Assumptions: + * - todc_info->control_a has the offset as mc146818 Register B reg + * - todc_info->control_b has the offset as mc146818 Register A reg + * - m48txx control reg's write enable or 'W' bit is same as + * mc146818 Register B 'SET' bit (i.e., 0x80) + * + * These assumptions were made to make the code simpler. + */ +long __init +todc_time_init(void) +{ + u_char cntl_b; + + if (!ppc_md.rtc_read_val) + ppc_md.rtc_read_val = ppc_md.nvram_read_val; + if (!ppc_md.rtc_write_val) + ppc_md.rtc_write_val = ppc_md.nvram_write_val; + + cntl_b = todc_read_val(todc_info->control_b); + + if (todc_info->rtc_type == TODC_TYPE_MC146818) { + if ((cntl_b & 0x70) != 0x20) { + printk(KERN_INFO "TODC real-time-clock was stopped." + " Now starting..."); + cntl_b &= ~0x70; + cntl_b |= 0x20; + } + + todc_write_val(todc_info->control_b, cntl_b); + } else if (todc_info->rtc_type == TODC_TYPE_DS17285) { + u_char mode; + + mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A); + /* Make sure countdown clear is not set */ + mode &= ~0x40; + /* Enable oscillator, extended register set */ + mode |= 0x30; + todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode); + + } else if (todc_info->rtc_type == TODC_TYPE_DS1501) { + u_char month; + + todc_info->enable_read = TODC_DS1501_CNTL_B_TE; + todc_info->enable_write = TODC_DS1501_CNTL_B_TE; + + month = todc_read_val(todc_info->month); + + if ((month & 0x80) == 0x80) { + printk(KERN_INFO "TODC %s %s\n", + "real-time-clock was stopped.", + "Now starting..."); + month &= ~0x80; + todc_write_val(todc_info->month, month); + } + + cntl_b &= ~TODC_DS1501_CNTL_B_TE; + todc_write_val(todc_info->control_b, cntl_b); + } else { /* must be a m48txx type */ + u_char cntl_a; + + todc_info->enable_read = TODC_MK48TXX_CNTL_A_R; + todc_info->enable_write = TODC_MK48TXX_CNTL_A_W; + + cntl_a = todc_read_val(todc_info->control_a); + + /* Check & clear STOP bit in control B register */ + if (cntl_b & TODC_MK48TXX_DAY_CB) { + printk(KERN_INFO "TODC %s %s\n", + "real-time-clock was stopped.", + "Now starting..."); + + cntl_a |= todc_info->enable_write; + cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */ + + todc_write_val(todc_info->control_a, cntl_a); + todc_write_val(todc_info->control_b, cntl_b); + } + + /* Make sure READ & WRITE bits are cleared. */ + cntl_a &= ~(todc_info->enable_write | todc_info->enable_read); + todc_write_val(todc_info->control_a, cntl_a); + } + + return 0; +} + +/* + * There is some ugly stuff in that there are assumptions that for a mc146818, + * the todc_info->control_a has the offset of the mc146818 Register B reg and + * that the register'ss 'SET' bit is the same as the m48txx's write enable + * bit in the control register of the m48txx (i.e., 0x80). + * + * It was done to make the code look simpler. + */ +void +todc_get_rtc_time(struct rtc_time *tm) +{ + uint year = 0, mon = 0, mday = 0, hour = 0, min = 0, sec = 0; + uint limit, i; + u_char save_control, uip = 0; + extern void GregorianDay(struct rtc_time *); + + spin_lock(&rtc_lock); + save_control = todc_read_val(todc_info->control_a); + + if (todc_info->rtc_type != TODC_TYPE_MC146818) { + limit = 1; + + switch (todc_info->rtc_type) { + case TODC_TYPE_DS1553: + case TODC_TYPE_DS1557: + case TODC_TYPE_DS1743: + case TODC_TYPE_DS1746: /* XXXX BAD HACK -> FIX */ + case TODC_TYPE_DS1747: + case TODC_TYPE_DS17285: + break; + default: + todc_write_val(todc_info->control_a, + (save_control | todc_info->enable_read)); + } + } else + limit = 100000000; + + for (i=0; i<limit; i++) { + if (todc_info->rtc_type == TODC_TYPE_MC146818) + uip = todc_read_val(todc_info->RTC_FREQ_SELECT); + + sec = todc_read_val(todc_info->seconds) & 0x7f; + min = todc_read_val(todc_info->minutes) & 0x7f; + hour = todc_read_val(todc_info->hours) & 0x3f; + mday = todc_read_val(todc_info->day_of_month) & 0x3f; + mon = todc_read_val(todc_info->month) & 0x1f; + year = todc_read_val(todc_info->year) & 0xff; + + if (todc_info->rtc_type == TODC_TYPE_MC146818) { + uip |= todc_read_val(todc_info->RTC_FREQ_SELECT); + if ((uip & RTC_UIP) == 0) + break; + } + } + + if (todc_info->rtc_type != TODC_TYPE_MC146818) { + switch (todc_info->rtc_type) { + case TODC_TYPE_DS1553: + case TODC_TYPE_DS1557: + case TODC_TYPE_DS1743: + case TODC_TYPE_DS1746: /* XXXX BAD HACK -> FIX */ + case TODC_TYPE_DS1747: + case TODC_TYPE_DS17285: + break; + default: + save_control &= ~(todc_info->enable_read); + todc_write_val(todc_info->control_a, save_control); + } + } + spin_unlock(&rtc_lock); + + if ((todc_info->rtc_type != TODC_TYPE_MC146818) + || ((save_control & RTC_DM_BINARY) == 0) + || RTC_ALWAYS_BCD) { + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(mday); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + } + + if ((year + 1900) < 1970) { + year += 100; + } + + tm->tm_sec = sec; + tm->tm_min = min; + tm->tm_hour = hour; + tm->tm_mday = mday; + tm->tm_mon = mon; + tm->tm_year = year; + + GregorianDay(tm); +} + +int +todc_set_rtc_time(struct rtc_time *tm) +{ + u_char save_control, save_freq_select = 0; + + spin_lock(&rtc_lock); + save_control = todc_read_val(todc_info->control_a); + + /* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */ + todc_write_val(todc_info->control_a, + (save_control | todc_info->enable_write)); + save_control &= ~(todc_info->enable_write); /* in case it was set */ + + if (todc_info->rtc_type == TODC_TYPE_MC146818) { + save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT); + todc_write_val(todc_info->RTC_FREQ_SELECT, + save_freq_select | RTC_DIV_RESET2); + } + + if ((todc_info->rtc_type != TODC_TYPE_MC146818) + || ((save_control & RTC_DM_BINARY) == 0) + || RTC_ALWAYS_BCD) { + BIN_TO_BCD(tm->tm_sec); + BIN_TO_BCD(tm->tm_min); + BIN_TO_BCD(tm->tm_hour); + BIN_TO_BCD(tm->tm_mon); + BIN_TO_BCD(tm->tm_mday); + BIN_TO_BCD(tm->tm_year); + } + + todc_write_val(todc_info->seconds, tm->tm_sec); + todc_write_val(todc_info->minutes, tm->tm_min); + todc_write_val(todc_info->hours, tm->tm_hour); + todc_write_val(todc_info->month, tm->tm_mon); + todc_write_val(todc_info->day_of_month, tm->tm_mday); + todc_write_val(todc_info->year, tm->tm_year); + + todc_write_val(todc_info->control_a, save_control); + + if (todc_info->rtc_type == TODC_TYPE_MC146818) + todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select); + + spin_unlock(&rtc_lock); + return 0; +} diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c new file mode 100644 index 000000000000..26a0cc820cde --- /dev/null +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -0,0 +1,145 @@ +/* + * tsi108/109 device setup code + * + * Maintained by Roy Zang < tie-fei.zang@freescale.com > + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/major.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <asm/tsi108.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <mm/mmu_decl.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + +static phys_addr_t tsi108_csr_base = -1; + +phys_addr_t get_csrbase(void) +{ + struct device_node *tsi; + + if (tsi108_csr_base != -1) + return tsi108_csr_base; + + tsi = of_find_node_by_type(NULL, "tsi-bridge"); + if (tsi) { + unsigned int size; + void *prop = get_property(tsi, "reg", &size); + tsi108_csr_base = of_translate_address(tsi, prop); + of_node_put(tsi); + }; + return tsi108_csr_base; +} + +u32 get_vir_csrbase(void) +{ + return (u32) (ioremap(get_csrbase(), 0x10000)); +} + +EXPORT_SYMBOL(get_csrbase); +EXPORT_SYMBOL(get_vir_csrbase); + +static int __init tsi108_eth_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *tsi_eth_dev; + struct resource res; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "network", "tsi-ethernet")) != NULL; + i++) { + struct resource r[2]; + struct device_node *phy; + hw_info tsi_eth_data; + unsigned int *id; + unsigned int *phy_id; + void *mac_addr; + phandle *ph; + + memset(r, 0, sizeof(r)); + memset(&tsi_eth_data, 0, sizeof(tsi_eth_data)); + + ret = of_address_to_resource(np, 0, &r[0]); + DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", + __FUNCTION__,r[0].name, r[0].start, r[0].end); + if (ret) + goto err; + + r[1].name = "tx"; + r[1].start = np->intrs[0].line; + r[1].end = np->intrs[0].line; + r[1].flags = IORESOURCE_IRQ; + + tsi_eth_dev = + platform_device_register_simple("tsi-ethernet", i, &r[0], + np->n_intrs + 1); + + if (IS_ERR(tsi_eth_dev)) { + ret = PTR_ERR(tsi_eth_dev); + goto err; + } + + mac_addr = get_property(np, "address", NULL); + memcpy(tsi_eth_data.mac_addr, mac_addr, 6); + + ph = (phandle *) get_property(np, "phy-handle", NULL); + phy = of_find_node_by_phandle(*ph); + + if (phy == NULL) { + ret = -ENODEV; + goto unreg; + } + + id = (u32 *) get_property(phy, "reg", NULL); + phy_id = (u32 *) get_property(phy, "phy-id", NULL); + ret = of_address_to_resource(phy, 0, &res); + if (ret) { + of_node_put(phy); + goto unreg; + } + tsi_eth_data.regs = r[0].start; + tsi_eth_data.phyregs = res.start; + tsi_eth_data.phy = *phy_id; + tsi_eth_data.irq_num = np->intrs[0].line; + of_node_put(phy); + ret = + platform_device_add_data(tsi_eth_dev, &tsi_eth_data, + sizeof(hw_info)); + if (ret) + goto unreg; + } + return 0; +unreg: + platform_device_unregister(tsi_eth_dev); +err: + return ret; +} + +arch_initcall(tsi108_eth_of_init); diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c new file mode 100644 index 000000000000..3265d54c82ed --- /dev/null +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -0,0 +1,412 @@ +/* + * Common routines for Tundra Semiconductor TSI108 host bridge. + * + * 2004-2005 (c) Tundra Semiconductor Corp. + * Author: Alex Bounine (alexandreb@tundra.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/tsi108.h> +#include <asm/tsi108_irq.h> +#include <asm/prom.h> + +#undef DEBUG +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#define tsi_mk_config_addr(bus, devfunc, offset) \ + ((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base) + +u32 tsi108_pci_cfg_base; +u32 tsi108_csr_vir_base; + +extern u32 get_vir_csrbase(void); +extern u32 tsi108_read_reg(u32 reg_offset); +extern void tsi108_write_reg(u32 reg_offset, u32 val); + +int +tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc, + int offset, int len, u32 val) +{ + volatile unsigned char *cfg_addr; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfunc)) + return PCIBIOS_DEVICE_NOT_FOUND; + + cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number, + devfunc, offset) | + (offset & 0x03)); + +#ifdef DEBUG + printk("PCI CFG write : "); + printk("%d:0x%x:0x%x ", bus->number, devfunc, offset); + printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); + printk("data = 0x%08x\n", val); +#endif + + switch (len) { + case 1: + out_8((u8 *) cfg_addr, val); + break; + case 2: + out_le16((u16 *) cfg_addr, val); + break; + default: + out_le32((u32 *) cfg_addr, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +void tsi108_clear_pci_error(u32 pci_cfg_base) +{ + u32 err_stat, err_addr, pci_stat; + + /* + * Quietly clear PB and PCI error flags set as result + * of PCI/X configuration read requests. + */ + + /* Read PB Error Log Registers */ + + err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS); + err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR); + + if (err_stat & TSI108_PB_ERRCS_ES) { + /* Clear error flag */ + tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS, + TSI108_PB_ERRCS_ES); + + /* Clear read error reported in PB_ISR */ + tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR, + TSI108_PB_ISR_PBS_RD_ERR); + + /* Clear PCI/X bus cfg errors if applicable */ + if ((err_addr & 0xFF000000) == pci_cfg_base) { + pci_stat = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR, + pci_stat); + } + } + + return; +} + +#define __tsi108_read_pci_config(x, addr, op) \ + __asm__ __volatile__( \ + " "op" %0,0,%1\n" \ + "1: eieio\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,-1\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r"(x) : "r"(addr)) + +int +tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 * val) +{ + volatile unsigned char *cfg_addr; + u32 temp; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number, + devfn, + offset) | (offset & + 0x03)); + + switch (len) { + case 1: + __tsi108_read_pci_config(temp, cfg_addr, "lbzx"); + break; + case 2: + __tsi108_read_pci_config(temp, cfg_addr, "lhbrx"); + break; + default: + __tsi108_read_pci_config(temp, cfg_addr, "lwbrx"); + break; + } + + *val = temp; + +#ifdef DEBUG + if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) { + printk("PCI CFG read : "); + printk("%d:0x%x:0x%x ", bus->number, devfn, offset); + printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); + printk("data = 0x%x\n", *val); + } +#endif + return PCIBIOS_SUCCESSFUL; +} + +void tsi108_clear_pci_cfg_error(void) +{ + tsi108_clear_pci_error(TSI108_PCI_CFG_BASE_PHYS); +} + +static struct pci_ops tsi108_direct_pci_ops = { + tsi108_direct_read_config, + tsi108_direct_write_config +}; + +int __init tsi108_setup_pci(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + int *bus_range; + int primary = 0, has_address = 0; + + /* PCI Config mapping */ + tsi108_pci_cfg_base = (u32)ioremap(TSI108_PCI_CFG_BASE_PHYS, + TSI108_PCI_CFG_SIZE); + DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__, + tsi108_pci_cfg_base); + + /* Fetch host bridge registers address */ + has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + + /* Get bus range if any */ + bus_range = (int *)get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + } + + hose = pcibios_alloc_controller(); + + if (!hose) { + printk("PCI Host bridge init failed\n"); + return -ENOMEM; + } + hose->arch_data = dev; + hose->set_cfg_type = 1; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + (hose)->ops = &tsi108_direct_pci_ops; + + printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. " + "Firmware bus number: %d->%d\n", + rsrc.start, hose->first_busno, hose->last_busno); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + return 0; +} + +/* + * Low level utility functions + */ + +static void tsi108_pci_int_mask(u_int irq) +{ + u_int irp_cfg; + int int_line = (irq - IRQ_PCI_INTAD_BASE); + + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + irp_cfg |= (1 << int_line); /* INTx_DIR = output */ + irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg); + mb(); + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); +} + +static void tsi108_pci_int_unmask(u_int irq) +{ + u_int irp_cfg; + int int_line = (irq - IRQ_PCI_INTAD_BASE); + + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + irp_cfg &= ~(1 << int_line); + irp_cfg |= (3 << (8 + (int_line * 2))); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg); + mb(); +} + +static void init_pci_source(void) +{ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, + 0x0000ff00); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + TSI108_PCI_IRP_ENABLE_P_INT); + mb(); +} + +static inline int get_pci_source(void) +{ + u_int temp = 0; + int irq = -1; + int i; + u_int pci_irp_stat; + static int mask = 0; + + /* Read PCI/X block interrupt status register */ + pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT); + mb(); + + if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) { + /* Process Interrupt from PCI bus INTA# - INTD# lines */ + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + + TSI108_PCI_IRP_INTAD) & 0xf; + mb(); + for (i = 0; i < 4; i++, mask++) { + if (temp & (1 << mask % 4)) { + irq = IRQ_PCI_INTA + mask % 4; + mask++; + break; + } + } + + /* Disable interrupts from PCI block */ + temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + temp & ~TSI108_PCI_IRP_ENABLE_P_INT); + mb(); + (void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + mb(); + } +#ifdef DEBUG + else { + printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n"); + pci_irp_stat = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD); + mb(); + printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + printk("cfg_ctl=0x%08x ", temp); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + mb(); + printk("irp_enable=0x%08x\n", temp); + } +#endif /* end of DEBUG */ + + return irq; +} + + +/* + * Linux descriptor level callbacks + */ + +static void tsi108_pci_irq_enable(u_int irq) +{ + tsi108_pci_int_unmask(irq); +} + +static void tsi108_pci_irq_disable(u_int irq) +{ + tsi108_pci_int_mask(irq); +} + +static void tsi108_pci_irq_ack(u_int irq) +{ + tsi108_pci_int_mask(irq); +} + +static void tsi108_pci_irq_end(u_int irq) +{ + tsi108_pci_int_unmask(irq); + + /* Enable interrupts from PCI block */ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + tsi108_read_reg(TSI108_PCI_OFFSET + + TSI108_PCI_IRP_ENABLE) | + TSI108_PCI_IRP_ENABLE_P_INT); + mb(); +} + +/* + * Interrupt controller descriptor for cascaded PCI interrupt controller. + */ + +struct hw_interrupt_type tsi108_pci_irq = { + .typename = "tsi108_PCI_int", + .enable = tsi108_pci_irq_enable, + .disable = tsi108_pci_irq_disable, + .ack = tsi108_pci_irq_ack, + .end = tsi108_pci_irq_end, +}; + +/* + * Exported functions + */ + +/* + * The Tsi108 PCI interrupts initialization routine. + * + * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block + * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the + * PCI block has to be treated as a cascaded interrupt controller connected + * to the MPIC. + */ + +void __init tsi108_pci_int_init(void) +{ + u_int i; + + DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); + + for (i = 0; i < NUM_PCI_IRQS; i++) { + irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq; + irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL; + } + + init_pci_source(); +} + +int tsi108_irq_cascade(struct pt_regs *regs, void *unused) +{ + return get_pci_source(); +} diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index d633081fa4c5..d1266fe2d1ab 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -774,11 +774,18 @@ config BLK_DEV_IDEDMA_PMAC performance. config BLK_DEV_IDE_PMAC_BLINK - bool "Blink laptop LED on drive activity" + bool "Blink laptop LED on drive activity (DEPRECATED)" depends on BLK_DEV_IDE_PMAC && ADB_PMU + select ADB_PMU_LED + select LEDS_TRIGGERS + select LEDS_TRIGGER_IDE_DISK help This option enables the use of the sleep LED as a hard drive activity LED. + This option is deprecated, it only selects ADB_PMU_LED and + LEDS_TRIGGER_IDE_DISK and changes the code in the new led class + device to default to the ide-disk trigger (which should be set + from userspace via sysfs). config BLK_DEV_IDE_SWARM tristate "IDE for Sibyte evaluation boards" diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index ffca8b63ee79..e8ef3455ec35 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -421,107 +421,6 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive); #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ /* - * Below is the code for blinking the laptop LED along with hard - * disk activity. - */ - -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - -/* Set to 50ms minimum led-on time (also used to limit frequency - * of requests sent to the PMU - */ -#define PMU_HD_BLINK_TIME (HZ/50) - -static struct adb_request pmu_blink_on, pmu_blink_off; -static spinlock_t pmu_blink_lock; -static unsigned long pmu_blink_stoptime; -static int pmu_blink_ledstate; -static struct timer_list pmu_blink_timer; -static int pmu_ide_blink_enabled; - - -static void -pmu_hd_blink_timeout(unsigned long data) -{ - unsigned long flags; - - spin_lock_irqsave(&pmu_blink_lock, flags); - - /* We may have been triggered again in a racy way, check - * that we really want to switch it off - */ - if (time_after(pmu_blink_stoptime, jiffies)) - goto done; - - /* Previous req. not complete, try 100ms more */ - if (pmu_blink_off.complete == 0) - mod_timer(&pmu_blink_timer, jiffies + PMU_HD_BLINK_TIME); - else if (pmu_blink_ledstate) { - pmu_request(&pmu_blink_off, NULL, 4, 0xee, 4, 0, 0); - pmu_blink_ledstate = 0; - } -done: - spin_unlock_irqrestore(&pmu_blink_lock, flags); -} - -static void -pmu_hd_kick_blink(void *data, int rw) -{ - unsigned long flags; - - pmu_blink_stoptime = jiffies + PMU_HD_BLINK_TIME; - wmb(); - mod_timer(&pmu_blink_timer, pmu_blink_stoptime); - /* Fast path when LED is already ON */ - if (pmu_blink_ledstate == 1) - return; - spin_lock_irqsave(&pmu_blink_lock, flags); - if (pmu_blink_on.complete && !pmu_blink_ledstate) { - pmu_request(&pmu_blink_on, NULL, 4, 0xee, 4, 0, 1); - pmu_blink_ledstate = 1; - } - spin_unlock_irqrestore(&pmu_blink_lock, flags); -} - -static int -pmu_hd_blink_init(void) -{ - struct device_node *dt; - const char *model; - - /* Currently, I only enable this feature on KeyLargo based laptops, - * older laptops may support it (at least heathrow/paddington) but - * I don't feel like loading those venerable old machines with so - * much additional interrupt & PMU activity... - */ - if (pmu_get_model() != PMU_KEYLARGO_BASED) - return 0; - - dt = of_find_node_by_path("/"); - if (dt == NULL) - return 0; - model = (const char *)get_property(dt, "model", NULL); - if (model == NULL) - return 0; - if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 && - strncmp(model, "iBook", strlen("iBook")) != 0) { - of_node_put(dt); - return 0; - } - of_node_put(dt); - - pmu_blink_on.complete = 1; - pmu_blink_off.complete = 1; - spin_lock_init(&pmu_blink_lock); - init_timer(&pmu_blink_timer); - pmu_blink_timer.function = pmu_hd_blink_timeout; - - return 1; -} - -#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */ - -/* * N.B. this can't be an initfunc, because the media-bay task can * call ide_[un]register at any time. */ @@ -1192,23 +1091,6 @@ pmac_ide_do_suspend(ide_hwif_t *hwif) pmif->timings[0] = 0; pmif->timings[1] = 0; -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - /* Note: This code will be called for every hwif, thus we'll - * try several time to stop the LED blinker timer, but that - * should be harmless - */ - if (pmu_ide_blink_enabled) { - unsigned long flags; - - /* Make sure we don't hit the PMU blink */ - spin_lock_irqsave(&pmu_blink_lock, flags); - if (pmu_blink_ledstate) - del_timer(&pmu_blink_timer); - pmu_blink_ledstate = 0; - spin_unlock_irqrestore(&pmu_blink_lock, flags); - } -#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */ - disable_irq(pmif->irq); /* The media bay will handle itself just fine */ @@ -1376,13 +1258,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->selectproc = pmac_ide_selectproc; hwif->speedproc = pmac_ide_tune_chipset; -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - pmu_ide_blink_enabled = pmu_hd_blink_init(); - - if (pmu_ide_blink_enabled) - hwif->led_act = pmu_hd_kick_blink; -#endif - printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, pmif->mediabay ? " (mediabay)" : "", hwif->irq); diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 37cd6ee4586b..54f3f6b94efc 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -78,6 +78,18 @@ config ADB_PMU this device; you should do so if your machine is one of those mentioned above. +config ADB_PMU_LED + bool "Support for the Power/iBook front LED" + depends on ADB_PMU + select NEW_LEDS + select LEDS_CLASS + help + Support the front LED on Power/iBooks as a generic LED that can + be triggered by any of the supported triggers. To get the + behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this + and the ide-disk LED trigger and configure appropriately through + sysfs. + config PMAC_SMU bool "Support for SMU based PowerMacs" depends on PPC_PMAC64 diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile index 45a268f8047e..b53d45f87b0b 100644 --- a/drivers/macintosh/Makefile +++ b/drivers/macintosh/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_INPUT_ADBHID) += adbhid.o obj-$(CONFIG_ANSLCD) += ans-lcd.o obj-$(CONFIG_ADB_PMU) += via-pmu.o via-pmu-event.o +obj-$(CONFIG_ADB_PMU_LED) += via-pmu-led.o obj-$(CONFIG_PMAC_BACKLIGHT) += via-pmu-backlight.o obj-$(CONFIG_ADB_CUDA) += via-cuda.o obj-$(CONFIG_PMAC_APM_EMU) += apm_emu.o diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c new file mode 100644 index 000000000000..af8375ed0f5e --- /dev/null +++ b/drivers/macintosh/via-pmu-led.c @@ -0,0 +1,144 @@ +/* + * via-pmu LED class device + * + * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/leds.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <asm/prom.h> + +static spinlock_t pmu_blink_lock; +static struct adb_request pmu_blink_req; +/* -1: no change, 0: request off, 1: request on */ +static int requested_change; +static int sleeping; + +static void pmu_req_done(struct adb_request * req) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_blink_lock, flags); + /* if someone requested a change in the meantime + * (we only see the last one which is fine) + * then apply it now */ + if (requested_change != -1 && !sleeping) + pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change); + /* reset requested change */ + requested_change = -1; + spin_unlock_irqrestore(&pmu_blink_lock, flags); +} + +static void pmu_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_blink_lock, flags); + switch (brightness) { + case LED_OFF: + requested_change = 0; + break; + case LED_FULL: + requested_change = 1; + break; + default: + goto out; + break; + } + /* if request isn't done, then don't do anything */ + if (pmu_blink_req.complete && !sleeping) + pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change); + out: + spin_unlock_irqrestore(&pmu_blink_lock, flags); +} + +static struct led_classdev pmu_led = { + .name = "pmu-front-led", +#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK + .default_trigger = "ide-disk", +#endif + .brightness_set = pmu_led_set, +}; + +#ifdef CONFIG_PM +static int pmu_led_sleep_call(struct pmu_sleep_notifier *self, int when) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_blink_lock, flags); + + switch (when) { + case PBOOK_SLEEP_REQUEST: + sleeping = 1; + break; + case PBOOK_WAKE: + sleeping = 0; + break; + default: + /* do nothing */ + break; + } + spin_unlock_irqrestore(&pmu_blink_lock, flags); + + return PBOOK_SLEEP_OK; +} + +static struct pmu_sleep_notifier via_pmu_led_sleep_notif = { + .notifier_call = pmu_led_sleep_call, +}; +#endif + +static int __init via_pmu_led_init(void) +{ + struct device_node *dt; + const char *model; + + /* only do this on keylargo based models */ + if (pmu_get_model() != PMU_KEYLARGO_BASED) + return -ENODEV; + + dt = of_find_node_by_path("/"); + if (dt == NULL) + return -ENODEV; + model = (const char *)get_property(dt, "model", NULL); + if (model == NULL) + return -ENODEV; + if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 && + strncmp(model, "iBook", strlen("iBook")) != 0) { + of_node_put(dt); + /* ignore */ + return -ENODEV; + } + of_node_put(dt); + + spin_lock_init(&pmu_blink_lock); + /* no outstanding req */ + pmu_blink_req.complete = 1; + pmu_blink_req.done = pmu_req_done; +#ifdef CONFIG_PM + pmu_register_sleep_notifier(&via_pmu_led_sleep_notif); +#endif + return led_classdev_register(NULL, &pmu_led); +} + +late_initcall(via_pmu_led_init); diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index fab41c280aa1..1ba3c9983614 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -117,38 +117,30 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000) #define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000) +/* + * Add the 64-bit processor unique features in the top half of the word; + * on 32-bit, make the names available but defined to be 0. + */ #ifdef __powerpc64__ -/* Add the 64b processor unique features in the top half of the word */ -#define CPU_FTR_SLB ASM_CONST(0x0000000100000000) -#define CPU_FTR_16M_PAGE ASM_CONST(0x0000000200000000) -#define CPU_FTR_TLBIEL ASM_CONST(0x0000000400000000) -#define CPU_FTR_NOEXECUTE ASM_CONST(0x0000000800000000) -#define CPU_FTR_IABR ASM_CONST(0x0000002000000000) -#define CPU_FTR_MMCRA ASM_CONST(0x0000004000000000) -#define CPU_FTR_CTRL ASM_CONST(0x0000008000000000) -#define CPU_FTR_SMT ASM_CONST(0x0000010000000000) -#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0000020000000000) -#define CPU_FTR_LOCKLESS_TLBIE ASM_CONST(0x0000040000000000) -#define CPU_FTR_CI_LARGE_PAGE ASM_CONST(0x0000100000000000) -#define CPU_FTR_PAUSE_ZERO ASM_CONST(0x0000200000000000) -#define CPU_FTR_PURR ASM_CONST(0x0000400000000000) +#define LONG_ASM_CONST(x) ASM_CONST(x) #else -/* ensure on 32b processors the flags are available for compiling but - * don't do anything */ -#define CPU_FTR_SLB ASM_CONST(0x0) -#define CPU_FTR_16M_PAGE ASM_CONST(0x0) -#define CPU_FTR_TLBIEL ASM_CONST(0x0) -#define CPU_FTR_NOEXECUTE ASM_CONST(0x0) -#define CPU_FTR_IABR ASM_CONST(0x0) -#define CPU_FTR_MMCRA ASM_CONST(0x0) -#define CPU_FTR_CTRL ASM_CONST(0x0) -#define CPU_FTR_SMT ASM_CONST(0x0) -#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0) -#define CPU_FTR_LOCKLESS_TLBIE ASM_CONST(0x0) -#define CPU_FTR_CI_LARGE_PAGE ASM_CONST(0x0) -#define CPU_FTR_PURR ASM_CONST(0x0) +#define LONG_ASM_CONST(x) 0 #endif +#define CPU_FTR_SLB LONG_ASM_CONST(0x0000000100000000) +#define CPU_FTR_16M_PAGE LONG_ASM_CONST(0x0000000200000000) +#define CPU_FTR_TLBIEL LONG_ASM_CONST(0x0000000400000000) +#define CPU_FTR_NOEXECUTE LONG_ASM_CONST(0x0000000800000000) +#define CPU_FTR_IABR LONG_ASM_CONST(0x0000002000000000) +#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000004000000000) +#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000008000000000) +#define CPU_FTR_SMT LONG_ASM_CONST(0x0000010000000000) +#define CPU_FTR_COHERENT_ICACHE LONG_ASM_CONST(0x0000020000000000) +#define CPU_FTR_LOCKLESS_TLBIE LONG_ASM_CONST(0x0000040000000000) +#define CPU_FTR_CI_LARGE_PAGE LONG_ASM_CONST(0x0000100000000000) +#define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000200000000000) +#define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000) + #ifndef __ASSEMBLY__ #define CPU_FTR_PPCAS_ARCH_V2_BASE (CPU_FTR_SLB | \ diff --git a/include/asm-powerpc/iseries/it_lp_queue.h b/include/asm-powerpc/iseries/it_lp_queue.h index b7c6fc12cce2..284c5a7db3ac 100644 --- a/include/asm-powerpc/iseries/it_lp_queue.h +++ b/include/asm-powerpc/iseries/it_lp_queue.h @@ -29,20 +29,20 @@ struct HvLpEvent; -#define ITMaxLpQueues 8 +#define IT_LP_MAX_QUEUES 8 -#define NotUsed 0 // Queue will not be used by PLIC -#define DedicatedIo 1 // Queue dedicated to IO processor specified -#define DedicatedLp 2 // Queue dedicated to LP specified -#define Shared 3 // Queue shared for both IO and LP +#define IT_LP_NOT_USED 0 /* Queue will not be used by PLIC */ +#define IT_LP_DEDICATED_IO 1 /* Queue dedicated to IO processor specified */ +#define IT_LP_DEDICATED_LP 2 /* Queue dedicated to LP specified */ +#define IT_LP_SHARED 3 /* Queue shared for both IO and LP */ -#define LpEventStackSize 4096 -#define LpEventMaxSize 256 -#define LpEventAlign 64 +#define IT_LP_EVENT_STACK_SIZE 4096 +#define IT_LP_EVENT_MAX_SIZE 256 +#define IT_LP_EVENT_ALIGN 64 struct hvlpevent_queue { /* - * The xSlicCurEventPtr is the pointer to the next event stack entry + * The hq_current_event is the pointer to the next event stack entry * that will become valid. The OS must peek at this entry to determine * if it is valid. PLIC will set the valid indicator as the very last * store into that entry. @@ -52,23 +52,23 @@ struct hvlpevent_queue { * location again. * * If the event stack fills and there are overflow events, then PLIC - * will set the xPlicOverflowIntPending flag in which case the OS will + * will set the hq_overflow_pending flag in which case the OS will * have to fetch the additional LP events once they have drained the * event stack. * * The first 16-bytes are known by both the OS and PLIC. The remainder * of the cache line is for use by the OS. */ - u8 xPlicOverflowIntPending;// 0x00 Overflow events are pending - u8 xPlicStatus; // 0x01 DedicatedIo or DedicatedLp or NotUsed - u16 xSlicLogicalProcIndex; // 0x02 Logical Proc Index for correlation - u8 xPlicRsvd[12]; // 0x04 - char *xSlicCurEventPtr; // 0x10 - char *xSlicLastValidEventPtr; // 0x18 - char *xSlicEventStackPtr; // 0x20 - u8 xIndex; // 0x28 unique sequential index. - u8 xSlicRsvd[3]; // 0x29-2b - spinlock_t lock; + u8 hq_overflow_pending; /* 0x00 Overflow events are pending */ + u8 hq_status; /* 0x01 DedicatedIo or DedicatedLp or NotUsed */ + u16 hq_proc_index; /* 0x02 Logical Proc Index for correlation */ + u8 hq_reserved1[12]; /* 0x04 */ + char *hq_current_event; /* 0x10 */ + char *hq_last_event; /* 0x18 */ + char *hq_event_stack; /* 0x20 */ + u8 hq_index; /* 0x28 unique sequential index. */ + u8 hq_reserved2[3]; /* 0x29-2b */ + spinlock_t hq_lock; }; extern struct hvlpevent_queue hvlpevent_queue; diff --git a/include/asm-powerpc/kdump.h b/include/asm-powerpc/kdump.h index 5a5c3b5ab1e0..dc1574c945f8 100644 --- a/include/asm-powerpc/kdump.h +++ b/include/asm-powerpc/kdump.h @@ -15,6 +15,8 @@ #define KDUMP_TRAMPOLINE_START 0x0100 #define KDUMP_TRAMPOLINE_END 0x3000 +#define KDUMP_MIN_TCE_ENTRIES 2048 + #else /* !CONFIG_CRASH_DUMP */ #define PHYSICAL_START 0x0 diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h index efe8872ec583..8f7fd5cfec34 100644 --- a/include/asm-powerpc/kexec.h +++ b/include/asm-powerpc/kexec.h @@ -112,9 +112,13 @@ static inline void crash_setup_regs(struct pt_regs *newregs, #ifdef __powerpc64__ extern void kexec_smp_wait(void); /* get and clear naca physid, wait for master to copy new code to 0 */ -extern void __init kexec_setup(void); extern int crashing_cpu; extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)); +extern cpumask_t cpus_in_sr; +static inline int kexec_sr_activated(int cpu) +{ + return cpu_isset(cpu,cpus_in_sr); +} #endif /* __powerpc64 __ */ struct kimage; @@ -124,10 +128,13 @@ extern int default_machine_kexec_prepare(struct kimage *image); extern void default_machine_crash_shutdown(struct pt_regs *regs); extern void machine_kexec_simple(struct kimage *image); +extern void crash_kexec_secondary(struct pt_regs *regs); extern int overlaps_crashkernel(unsigned long start, unsigned long size); extern void reserve_crashkernel(void); #else /* !CONFIG_KEXEC */ +static inline int kexec_sr_activated(int cpu) { return 0; } +static inline void crash_kexec_secondary(struct pt_regs *regs) { } static inline int overlaps_crashkernel(unsigned long start, unsigned long size) { diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 73db1f71329d..eba133d149a7 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -81,6 +81,8 @@ struct machdep_calls { void (*tce_free)(struct iommu_table *tbl, long index, long npages); + unsigned long (*tce_get)(struct iommu_table *tbl, + long index); void (*tce_flush)(struct iommu_table *tbl); void (*iommu_dev_setup)(struct pci_dev *dev); void (*iommu_bus_setup)(struct pci_bus *bus); diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h index 3a5ebe229af5..c3fc7a28e3cd 100644 --- a/include/asm-powerpc/mmu.h +++ b/include/asm-powerpc/mmu.h @@ -238,7 +238,6 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access, unsigned long ea, unsigned long vsid, int local, unsigned long trap); -extern void htab_finish_init(void); extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long pstart, unsigned long mode, int psize); diff --git a/include/asm-powerpc/mmu_context.h b/include/asm-powerpc/mmu_context.h index 8c6b1a6d944f..083ac917bd29 100644 --- a/include/asm-powerpc/mmu_context.h +++ b/include/asm-powerpc/mmu_context.h @@ -25,8 +25,13 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, { } +/* + * The proto-VSID space has 2^35 - 1 segments available for user mappings. + * Each segment contains 2^28 bytes. Each context maps 2^44 bytes, + * so we can support 2^19-1 contexts (19 == 35 + 28 - 44). + */ #define NO_CONTEXT 0 -#define MAX_CONTEXT (0x100000-1) +#define MAX_CONTEXT ((1UL << 19) - 1) extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); extern void destroy_context(struct mm_struct *mm); diff --git a/include/asm-powerpc/mpc86xx.h b/include/asm-powerpc/mpc86xx.h index d0a6718d188b..f260382739fa 100644 --- a/include/asm-powerpc/mpc86xx.h +++ b/include/asm-powerpc/mpc86xx.h @@ -15,15 +15,10 @@ #ifndef __ASM_POWERPC_MPC86xx_H__ #define __ASM_POWERPC_MPC86xx_H__ -#include <linux/config.h> #include <asm/mmu.h> #ifdef CONFIG_PPC_86xx -#ifdef CONFIG_MPC8641_HPCN -#include <platforms/86xx/mpc8641_hpcn.h> -#endif - #define _IO_BASE isa_io_base #define _ISA_MEM_BASE isa_mem_base #ifdef CONFIG_PCI diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h index 02e213e3d69f..a33c6acffa61 100644 --- a/include/asm-powerpc/rtas.h +++ b/include/asm-powerpc/rtas.h @@ -181,6 +181,9 @@ extern int rtas_set_rtc_time(struct rtc_time *rtc_time); extern unsigned int rtas_busy_delay_time(int status); extern unsigned int rtas_busy_delay(int status); +extern int early_init_dt_scan_rtas(unsigned long node, + const char *uname, int depth, void *data); + extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal); /* Error types logged. */ diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h index 4463148c659f..dcde4410348d 100644 --- a/include/asm-powerpc/time.h +++ b/include/asm-powerpc/time.h @@ -18,8 +18,9 @@ #include <linux/percpu.h> #include <asm/processor.h> -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_ISERIES #include <asm/paca.h> +#include <asm/firmware.h> #include <asm/iseries/hv_call.h> #endif @@ -177,7 +178,8 @@ static inline void set_dec(int val) #ifdef CONFIG_PPC_ISERIES int cur_dec; - if (get_lppaca()->shared_proc) { + if (firmware_has_feature(FW_FEATURE_ISERIES) && + get_lppaca()->shared_proc) { get_lppaca()->virtual_decr = val; cur_dec = get_dec(); if (cur_dec > val) diff --git a/include/asm-powerpc/todc.h b/include/asm-powerpc/todc.h new file mode 100644 index 000000000000..60a8c39b8c11 --- /dev/null +++ b/include/asm-powerpc/todc.h @@ -0,0 +1,487 @@ +/* + * Definitions for the M48Txx and mc146818 series of Time of day/Real Time + * Clock chips. + * + * Author: Mark A. Greer <mgreer@mvista.com> + * + * 2001 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +/* + * Support for the M48T37/M48T59/.../mc146818 Real Time Clock chips. + * Purpose is to make one generic file that handles all of these chips instead + * of every platform implementing the same code over & over again. + */ + +#ifndef __PPC_KERNEL_TODC_H +#define __PPC_KERNEL_TODC_H + +typedef struct { + uint rtc_type; /* your particular chip */ + + /* + * Following are the addresses of the AS0, AS1, and DATA registers + * of these chips. Note that these are board-specific. + */ + unsigned int nvram_as0; + unsigned int nvram_as1; + unsigned int nvram_data; + + /* + * Define bits to stop external set of regs from changing so + * the chip can be read/written reliably. + */ + unsigned char enable_read; + unsigned char enable_write; + + /* + * Following is the number of AS0 address bits. This is normally + * 8 but some bad hardware routes address lines incorrectly. + */ + int as0_bits; + + int nvram_size; /* Size of NVRAM on chip */ + int sw_flags; /* Software control flags */ + + /* Following are the register offsets for the particular chip */ + int year; + int month; + int day_of_month; + int day_of_week; + int hours; + int minutes; + int seconds; + int control_b; + int control_a; + int watchdog; + int interrupts; + int alarm_date; + int alarm_hour; + int alarm_minutes; + int alarm_seconds; + int century; + int flags; + + /* + * Some RTC chips have their NVRAM buried behind a addr/data pair of + * regs on the first level/clock registers. The following fields + * are the addresses for those addr/data regs. + */ + int nvram_addr_reg; + int nvram_data_reg; +} todc_info_t; + +/* + * Define the types of TODC/RTC variants that are supported in + * arch/ppc/kernel/todc_time.c + * Make a new one of these for any chip somehow differs from what's already + * defined. That way, if you ever need to put in code to touch those + * bits/registers in todc_time.c, you can put it inside an + * 'if (todc_info->rtc_type == TODC_TYPE_XXX)' so you won't break + * anyone else. + */ +#define TODC_TYPE_MK48T35 1 +#define TODC_TYPE_MK48T37 2 +#define TODC_TYPE_MK48T59 3 +#define TODC_TYPE_DS1693 4 /* Dallas DS1693 RTC */ +#define TODC_TYPE_DS1743 5 /* Dallas DS1743 RTC */ +#define TODC_TYPE_DS1746 6 /* Dallas DS1746 RTC */ +#define TODC_TYPE_DS1747 7 /* Dallas DS1747 RTC */ +#define TODC_TYPE_DS1501 8 /* Dallas DS1501 RTC */ +#define TODC_TYPE_DS1643 9 /* Dallas DS1643 RTC */ +#define TODC_TYPE_PC97307 10 /* PC97307 internal RTC */ +#define TODC_TYPE_DS1557 11 /* Dallas DS1557 RTC */ +#define TODC_TYPE_DS17285 12 /* Dallas DS17285 RTC */ +#define TODC_TYPE_DS1553 13 /* Dallas DS1553 RTC */ +#define TODC_TYPE_MC146818 100 /* Leave room for m48txx's */ + +/* + * Bit to clear/set to enable reads/writes to the chip + */ +#define TODC_MK48TXX_CNTL_A_R 0x40 +#define TODC_MK48TXX_CNTL_A_W 0x80 +#define TODC_MK48TXX_DAY_CB 0x80 + +#define TODC_DS1501_CNTL_B_TE 0x80 + +/* + * Define flag bits used by todc routines. + */ +#define TODC_FLAG_2_LEVEL_NVRAM 0x00000001 + +/* + * Define the values for the various RTC's that should to into the todc_info + * table. + * Note: The XXX_NVRAM_SIZE, XXX_NVRAM_ADDR_REG, and XXX_NVRAM_DATA_REG only + * matter if XXX_SW_FLAGS has TODC_FLAG_2_LEVEL_NVRAM set. + */ +#define TODC_TYPE_MK48T35_NVRAM_SIZE 0x7ff8 +#define TODC_TYPE_MK48T35_SW_FLAGS 0 +#define TODC_TYPE_MK48T35_YEAR 0x7fff +#define TODC_TYPE_MK48T35_MONTH 0x7ffe +#define TODC_TYPE_MK48T35_DOM 0x7ffd /* Day of Month */ +#define TODC_TYPE_MK48T35_DOW 0x7ffc /* Day of Week */ +#define TODC_TYPE_MK48T35_HOURS 0x7ffb +#define TODC_TYPE_MK48T35_MINUTES 0x7ffa +#define TODC_TYPE_MK48T35_SECONDS 0x7ff9 +#define TODC_TYPE_MK48T35_CNTL_B 0x7ff9 +#define TODC_TYPE_MK48T35_CNTL_A 0x7ff8 +#define TODC_TYPE_MK48T35_WATCHDOG 0x0000 +#define TODC_TYPE_MK48T35_INTERRUPTS 0x0000 +#define TODC_TYPE_MK48T35_ALARM_DATE 0x0000 +#define TODC_TYPE_MK48T35_ALARM_HOUR 0x0000 +#define TODC_TYPE_MK48T35_ALARM_MINUTES 0x0000 +#define TODC_TYPE_MK48T35_ALARM_SECONDS 0x0000 +#define TODC_TYPE_MK48T35_CENTURY 0x0000 +#define TODC_TYPE_MK48T35_FLAGS 0x0000 +#define TODC_TYPE_MK48T35_NVRAM_ADDR_REG 0 +#define TODC_TYPE_MK48T35_NVRAM_DATA_REG 0 + +#define TODC_TYPE_MK48T37_NVRAM_SIZE 0x7ff0 +#define TODC_TYPE_MK48T37_SW_FLAGS 0 +#define TODC_TYPE_MK48T37_YEAR 0x7fff +#define TODC_TYPE_MK48T37_MONTH 0x7ffe +#define TODC_TYPE_MK48T37_DOM 0x7ffd /* Day of Month */ +#define TODC_TYPE_MK48T37_DOW 0x7ffc /* Day of Week */ +#define TODC_TYPE_MK48T37_HOURS 0x7ffb +#define TODC_TYPE_MK48T37_MINUTES 0x7ffa +#define TODC_TYPE_MK48T37_SECONDS 0x7ff9 +#define TODC_TYPE_MK48T37_CNTL_B 0x7ff9 +#define TODC_TYPE_MK48T37_CNTL_A 0x7ff8 +#define TODC_TYPE_MK48T37_WATCHDOG 0x7ff7 +#define TODC_TYPE_MK48T37_INTERRUPTS 0x7ff6 +#define TODC_TYPE_MK48T37_ALARM_DATE 0x7ff5 +#define TODC_TYPE_MK48T37_ALARM_HOUR 0x7ff4 +#define TODC_TYPE_MK48T37_ALARM_MINUTES 0x7ff3 +#define TODC_TYPE_MK48T37_ALARM_SECONDS 0x7ff2 +#define TODC_TYPE_MK48T37_CENTURY 0x7ff1 +#define TODC_TYPE_MK48T37_FLAGS 0x7ff0 +#define TODC_TYPE_MK48T37_NVRAM_ADDR_REG 0 +#define TODC_TYPE_MK48T37_NVRAM_DATA_REG 0 + +#define TODC_TYPE_MK48T59_NVRAM_SIZE 0x1ff0 +#define TODC_TYPE_MK48T59_SW_FLAGS 0 +#define TODC_TYPE_MK48T59_YEAR 0x1fff +#define TODC_TYPE_MK48T59_MONTH 0x1ffe +#define TODC_TYPE_MK48T59_DOM 0x1ffd /* Day of Month */ +#define TODC_TYPE_MK48T59_DOW 0x1ffc /* Day of Week */ +#define TODC_TYPE_MK48T59_HOURS 0x1ffb +#define TODC_TYPE_MK48T59_MINUTES 0x1ffa +#define TODC_TYPE_MK48T59_SECONDS 0x1ff9 +#define TODC_TYPE_MK48T59_CNTL_B 0x1ff9 +#define TODC_TYPE_MK48T59_CNTL_A 0x1ff8 +#define TODC_TYPE_MK48T59_WATCHDOG 0x1fff +#define TODC_TYPE_MK48T59_INTERRUPTS 0x1fff +#define TODC_TYPE_MK48T59_ALARM_DATE 0x1fff +#define TODC_TYPE_MK48T59_ALARM_HOUR 0x1fff +#define TODC_TYPE_MK48T59_ALARM_MINUTES 0x1fff +#define TODC_TYPE_MK48T59_ALARM_SECONDS 0x1fff +#define TODC_TYPE_MK48T59_CENTURY 0x1fff +#define TODC_TYPE_MK48T59_FLAGS 0x1fff +#define TODC_TYPE_MK48T59_NVRAM_ADDR_REG 0 +#define TODC_TYPE_MK48T59_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1501_NVRAM_SIZE 0x100 +#define TODC_TYPE_DS1501_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM +#define TODC_TYPE_DS1501_YEAR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x06) +#define TODC_TYPE_DS1501_MONTH (TODC_TYPE_DS1501_NVRAM_SIZE + 0x05) +#define TODC_TYPE_DS1501_DOM (TODC_TYPE_DS1501_NVRAM_SIZE + 0x04) +#define TODC_TYPE_DS1501_DOW (TODC_TYPE_DS1501_NVRAM_SIZE + 0x03) +#define TODC_TYPE_DS1501_HOURS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x02) +#define TODC_TYPE_DS1501_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x01) +#define TODC_TYPE_DS1501_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x00) +#define TODC_TYPE_DS1501_CNTL_B (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f) +#define TODC_TYPE_DS1501_CNTL_A (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f) +#define TODC_TYPE_DS1501_WATCHDOG (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) +#define TODC_TYPE_DS1501_INTERRUPTS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) +#define TODC_TYPE_DS1501_ALARM_DATE (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0b) +#define TODC_TYPE_DS1501_ALARM_HOUR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0a) +#define TODC_TYPE_DS1501_ALARM_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x09) +#define TODC_TYPE_DS1501_ALARM_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x08) +#define TODC_TYPE_DS1501_CENTURY (TODC_TYPE_DS1501_NVRAM_SIZE + 0x07) +#define TODC_TYPE_DS1501_FLAGS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) +#define TODC_TYPE_DS1501_NVRAM_ADDR_REG 0x10 +#define TODC_TYPE_DS1501_NVRAM_DATA_REG 0x13 + +#define TODC_TYPE_DS1553_NVRAM_SIZE 0x1ff0 +#define TODC_TYPE_DS1553_SW_FLAGS 0 +#define TODC_TYPE_DS1553_YEAR 0x1fff +#define TODC_TYPE_DS1553_MONTH 0x1ffe +#define TODC_TYPE_DS1553_DOM 0x1ffd /* Day of Month */ +#define TODC_TYPE_DS1553_DOW 0x1ffc /* Day of Week */ +#define TODC_TYPE_DS1553_HOURS 0x1ffb +#define TODC_TYPE_DS1553_MINUTES 0x1ffa +#define TODC_TYPE_DS1553_SECONDS 0x1ff9 +#define TODC_TYPE_DS1553_CNTL_B 0x1ff9 +#define TODC_TYPE_DS1553_CNTL_A 0x1ff8 /* control_a R/W regs */ +#define TODC_TYPE_DS1553_WATCHDOG 0x1ff7 +#define TODC_TYPE_DS1553_INTERRUPTS 0x1ff6 +#define TODC_TYPE_DS1553_ALARM_DATE 0x1ff5 +#define TODC_TYPE_DS1553_ALARM_HOUR 0x1ff4 +#define TODC_TYPE_DS1553_ALARM_MINUTES 0x1ff3 +#define TODC_TYPE_DS1553_ALARM_SECONDS 0x1ff2 +#define TODC_TYPE_DS1553_CENTURY 0x1ff8 +#define TODC_TYPE_DS1553_FLAGS 0x1ff0 +#define TODC_TYPE_DS1553_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1553_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1557_NVRAM_SIZE 0x7fff0 +#define TODC_TYPE_DS1557_SW_FLAGS 0 +#define TODC_TYPE_DS1557_YEAR 0x7ffff +#define TODC_TYPE_DS1557_MONTH 0x7fffe +#define TODC_TYPE_DS1557_DOM 0x7fffd /* Day of Month */ +#define TODC_TYPE_DS1557_DOW 0x7fffc /* Day of Week */ +#define TODC_TYPE_DS1557_HOURS 0x7fffb +#define TODC_TYPE_DS1557_MINUTES 0x7fffa +#define TODC_TYPE_DS1557_SECONDS 0x7fff9 +#define TODC_TYPE_DS1557_CNTL_B 0x7fff9 +#define TODC_TYPE_DS1557_CNTL_A 0x7fff8 /* control_a R/W regs */ +#define TODC_TYPE_DS1557_WATCHDOG 0x7fff7 +#define TODC_TYPE_DS1557_INTERRUPTS 0x7fff6 +#define TODC_TYPE_DS1557_ALARM_DATE 0x7fff5 +#define TODC_TYPE_DS1557_ALARM_HOUR 0x7fff4 +#define TODC_TYPE_DS1557_ALARM_MINUTES 0x7fff3 +#define TODC_TYPE_DS1557_ALARM_SECONDS 0x7fff2 +#define TODC_TYPE_DS1557_CENTURY 0x7fff8 +#define TODC_TYPE_DS1557_FLAGS 0x7fff0 +#define TODC_TYPE_DS1557_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1557_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1643_NVRAM_SIZE 0x1ff8 +#define TODC_TYPE_DS1643_SW_FLAGS 0 +#define TODC_TYPE_DS1643_YEAR 0x1fff +#define TODC_TYPE_DS1643_MONTH 0x1ffe +#define TODC_TYPE_DS1643_DOM 0x1ffd /* Day of Month */ +#define TODC_TYPE_DS1643_DOW 0x1ffc /* Day of Week */ +#define TODC_TYPE_DS1643_HOURS 0x1ffb +#define TODC_TYPE_DS1643_MINUTES 0x1ffa +#define TODC_TYPE_DS1643_SECONDS 0x1ff9 +#define TODC_TYPE_DS1643_CNTL_B 0x1ff9 +#define TODC_TYPE_DS1643_CNTL_A 0x1ff8 /* control_a R/W regs */ +#define TODC_TYPE_DS1643_WATCHDOG 0x1fff +#define TODC_TYPE_DS1643_INTERRUPTS 0x1fff +#define TODC_TYPE_DS1643_ALARM_DATE 0x1fff +#define TODC_TYPE_DS1643_ALARM_HOUR 0x1fff +#define TODC_TYPE_DS1643_ALARM_MINUTES 0x1fff +#define TODC_TYPE_DS1643_ALARM_SECONDS 0x1fff +#define TODC_TYPE_DS1643_CENTURY 0x1ff8 +#define TODC_TYPE_DS1643_FLAGS 0x1fff +#define TODC_TYPE_DS1643_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1643_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1693_NVRAM_SIZE 0 /* Not handled yet */ +#define TODC_TYPE_DS1693_SW_FLAGS 0 +#define TODC_TYPE_DS1693_YEAR 0x09 +#define TODC_TYPE_DS1693_MONTH 0x08 +#define TODC_TYPE_DS1693_DOM 0x07 /* Day of Month */ +#define TODC_TYPE_DS1693_DOW 0x06 /* Day of Week */ +#define TODC_TYPE_DS1693_HOURS 0x04 +#define TODC_TYPE_DS1693_MINUTES 0x02 +#define TODC_TYPE_DS1693_SECONDS 0x00 +#define TODC_TYPE_DS1693_CNTL_B 0x0b +#define TODC_TYPE_DS1693_CNTL_A 0x0a +#define TODC_TYPE_DS1693_WATCHDOG 0xff +#define TODC_TYPE_DS1693_INTERRUPTS 0xff +#define TODC_TYPE_DS1693_ALARM_DATE 0x49 +#define TODC_TYPE_DS1693_ALARM_HOUR 0x05 +#define TODC_TYPE_DS1693_ALARM_MINUTES 0x03 +#define TODC_TYPE_DS1693_ALARM_SECONDS 0x01 +#define TODC_TYPE_DS1693_CENTURY 0x48 +#define TODC_TYPE_DS1693_FLAGS 0xff +#define TODC_TYPE_DS1693_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1693_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1743_NVRAM_SIZE 0x1ff8 +#define TODC_TYPE_DS1743_SW_FLAGS 0 +#define TODC_TYPE_DS1743_YEAR 0x1fff +#define TODC_TYPE_DS1743_MONTH 0x1ffe +#define TODC_TYPE_DS1743_DOM 0x1ffd /* Day of Month */ +#define TODC_TYPE_DS1743_DOW 0x1ffc /* Day of Week */ +#define TODC_TYPE_DS1743_HOURS 0x1ffb +#define TODC_TYPE_DS1743_MINUTES 0x1ffa +#define TODC_TYPE_DS1743_SECONDS 0x1ff9 +#define TODC_TYPE_DS1743_CNTL_B 0x1ff9 +#define TODC_TYPE_DS1743_CNTL_A 0x1ff8 /* control_a R/W regs */ +#define TODC_TYPE_DS1743_WATCHDOG 0x1fff +#define TODC_TYPE_DS1743_INTERRUPTS 0x1fff +#define TODC_TYPE_DS1743_ALARM_DATE 0x1fff +#define TODC_TYPE_DS1743_ALARM_HOUR 0x1fff +#define TODC_TYPE_DS1743_ALARM_MINUTES 0x1fff +#define TODC_TYPE_DS1743_ALARM_SECONDS 0x1fff +#define TODC_TYPE_DS1743_CENTURY 0x1ff8 +#define TODC_TYPE_DS1743_FLAGS 0x1fff +#define TODC_TYPE_DS1743_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1743_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1746_NVRAM_SIZE 0x1fff8 +#define TODC_TYPE_DS1746_SW_FLAGS 0 +#define TODC_TYPE_DS1746_YEAR 0x1ffff +#define TODC_TYPE_DS1746_MONTH 0x1fffe +#define TODC_TYPE_DS1746_DOM 0x1fffd /* Day of Month */ +#define TODC_TYPE_DS1746_DOW 0x1fffc /* Day of Week */ +#define TODC_TYPE_DS1746_HOURS 0x1fffb +#define TODC_TYPE_DS1746_MINUTES 0x1fffa +#define TODC_TYPE_DS1746_SECONDS 0x1fff9 +#define TODC_TYPE_DS1746_CNTL_B 0x1fff9 +#define TODC_TYPE_DS1746_CNTL_A 0x1fff8 /* control_a R/W regs */ +#define TODC_TYPE_DS1746_WATCHDOG 0x00000 +#define TODC_TYPE_DS1746_INTERRUPTS 0x00000 +#define TODC_TYPE_DS1746_ALARM_DATE 0x00000 +#define TODC_TYPE_DS1746_ALARM_HOUR 0x00000 +#define TODC_TYPE_DS1746_ALARM_MINUTES 0x00000 +#define TODC_TYPE_DS1746_ALARM_SECONDS 0x00000 +#define TODC_TYPE_DS1746_CENTURY 0x00000 +#define TODC_TYPE_DS1746_FLAGS 0x00000 +#define TODC_TYPE_DS1746_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1746_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1747_NVRAM_SIZE 0x7fff8 +#define TODC_TYPE_DS1747_SW_FLAGS 0 +#define TODC_TYPE_DS1747_YEAR 0x7ffff +#define TODC_TYPE_DS1747_MONTH 0x7fffe +#define TODC_TYPE_DS1747_DOM 0x7fffd /* Day of Month */ +#define TODC_TYPE_DS1747_DOW 0x7fffc /* Day of Week */ +#define TODC_TYPE_DS1747_HOURS 0x7fffb +#define TODC_TYPE_DS1747_MINUTES 0x7fffa +#define TODC_TYPE_DS1747_SECONDS 0x7fff9 +#define TODC_TYPE_DS1747_CNTL_B 0x7fff9 +#define TODC_TYPE_DS1747_CNTL_A 0x7fff8 /* control_a R/W regs */ +#define TODC_TYPE_DS1747_WATCHDOG 0x00000 +#define TODC_TYPE_DS1747_INTERRUPTS 0x00000 +#define TODC_TYPE_DS1747_ALARM_DATE 0x00000 +#define TODC_TYPE_DS1747_ALARM_HOUR 0x00000 +#define TODC_TYPE_DS1747_ALARM_MINUTES 0x00000 +#define TODC_TYPE_DS1747_ALARM_SECONDS 0x00000 +#define TODC_TYPE_DS1747_CENTURY 0x00000 +#define TODC_TYPE_DS1747_FLAGS 0x00000 +#define TODC_TYPE_DS1747_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1747_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS17285_NVRAM_SIZE (0x1000-0x80) /* 4Kx8 NVRAM (minus RTC regs) */ +#define TODC_TYPE_DS17285_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM +#define TODC_TYPE_DS17285_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x00) +#define TODC_TYPE_DS17285_ALARM_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x01) +#define TODC_TYPE_DS17285_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x02) +#define TODC_TYPE_DS17285_ALARM_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x03) +#define TODC_TYPE_DS17285_HOURS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x04) +#define TODC_TYPE_DS17285_ALARM_HOUR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x05) +#define TODC_TYPE_DS17285_DOW (TODC_TYPE_DS17285_NVRAM_SIZE + 0x06) +#define TODC_TYPE_DS17285_DOM (TODC_TYPE_DS17285_NVRAM_SIZE + 0x07) +#define TODC_TYPE_DS17285_MONTH (TODC_TYPE_DS17285_NVRAM_SIZE + 0x08) +#define TODC_TYPE_DS17285_YEAR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x09) +#define TODC_TYPE_DS17285_CNTL_A (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0A) +#define TODC_TYPE_DS17285_CNTL_B (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0B) +#define TODC_TYPE_DS17285_CNTL_C (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0C) +#define TODC_TYPE_DS17285_CNTL_D (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0D) +#define TODC_TYPE_DS17285_WATCHDOG 0 +#define TODC_TYPE_DS17285_INTERRUPTS 0 +#define TODC_TYPE_DS17285_ALARM_DATE 0 +#define TODC_TYPE_DS17285_CENTURY 0 +#define TODC_TYPE_DS17285_FLAGS 0 +#define TODC_TYPE_DS17285_NVRAM_ADDR_REG 0x50 +#define TODC_TYPE_DS17285_NVRAM_DATA_REG 0x53 + +#define TODC_TYPE_MC146818_NVRAM_SIZE 0 /* XXXX */ +#define TODC_TYPE_MC146818_SW_FLAGS 0 +#define TODC_TYPE_MC146818_YEAR 0x09 +#define TODC_TYPE_MC146818_MONTH 0x08 +#define TODC_TYPE_MC146818_DOM 0x07 /* Day of Month */ +#define TODC_TYPE_MC146818_DOW 0x06 /* Day of Week */ +#define TODC_TYPE_MC146818_HOURS 0x04 +#define TODC_TYPE_MC146818_MINUTES 0x02 +#define TODC_TYPE_MC146818_SECONDS 0x00 +#define TODC_TYPE_MC146818_CNTL_B 0x0a +#define TODC_TYPE_MC146818_CNTL_A 0x0b /* control_a R/W regs */ +#define TODC_TYPE_MC146818_WATCHDOG 0 +#define TODC_TYPE_MC146818_INTERRUPTS 0x0c +#define TODC_TYPE_MC146818_ALARM_DATE 0xff +#define TODC_TYPE_MC146818_ALARM_HOUR 0x05 +#define TODC_TYPE_MC146818_ALARM_MINUTES 0x03 +#define TODC_TYPE_MC146818_ALARM_SECONDS 0x01 +#define TODC_TYPE_MC146818_CENTURY 0xff +#define TODC_TYPE_MC146818_FLAGS 0xff +#define TODC_TYPE_MC146818_NVRAM_ADDR_REG 0 +#define TODC_TYPE_MC146818_NVRAM_DATA_REG 0 + +#define TODC_TYPE_PC97307_NVRAM_SIZE 0 /* No NVRAM? */ +#define TODC_TYPE_PC97307_SW_FLAGS 0 +#define TODC_TYPE_PC97307_YEAR 0x09 +#define TODC_TYPE_PC97307_MONTH 0x08 +#define TODC_TYPE_PC97307_DOM 0x07 /* Day of Month */ +#define TODC_TYPE_PC97307_DOW 0x06 /* Day of Week */ +#define TODC_TYPE_PC97307_HOURS 0x04 +#define TODC_TYPE_PC97307_MINUTES 0x02 +#define TODC_TYPE_PC97307_SECONDS 0x00 +#define TODC_TYPE_PC97307_CNTL_B 0x0a +#define TODC_TYPE_PC97307_CNTL_A 0x0b /* control_a R/W regs */ +#define TODC_TYPE_PC97307_WATCHDOG 0x0c +#define TODC_TYPE_PC97307_INTERRUPTS 0x0d +#define TODC_TYPE_PC97307_ALARM_DATE 0xff +#define TODC_TYPE_PC97307_ALARM_HOUR 0x05 +#define TODC_TYPE_PC97307_ALARM_MINUTES 0x03 +#define TODC_TYPE_PC97307_ALARM_SECONDS 0x01 +#define TODC_TYPE_PC97307_CENTURY 0xff +#define TODC_TYPE_PC97307_FLAGS 0xff +#define TODC_TYPE_PC97307_NVRAM_ADDR_REG 0 +#define TODC_TYPE_PC97307_NVRAM_DATA_REG 0 + +/* + * Define macros to allocate and init the todc_info_t table that will + * be used by the todc_time.c routines. + */ +#define TODC_ALLOC() \ + static todc_info_t todc_info_alloc; \ + todc_info_t *todc_info = &todc_info_alloc; + +#define TODC_INIT(clock_type, as0, as1, data, bits) { \ + todc_info->rtc_type = clock_type; \ + \ + todc_info->nvram_as0 = (unsigned int)(as0); \ + todc_info->nvram_as1 = (unsigned int)(as1); \ + todc_info->nvram_data = (unsigned int)(data); \ + \ + todc_info->as0_bits = (bits); \ + \ + todc_info->nvram_size = clock_type ##_NVRAM_SIZE; \ + todc_info->sw_flags = clock_type ##_SW_FLAGS; \ + \ + todc_info->year = clock_type ##_YEAR; \ + todc_info->month = clock_type ##_MONTH; \ + todc_info->day_of_month = clock_type ##_DOM; \ + todc_info->day_of_week = clock_type ##_DOW; \ + todc_info->hours = clock_type ##_HOURS; \ + todc_info->minutes = clock_type ##_MINUTES; \ + todc_info->seconds = clock_type ##_SECONDS; \ + todc_info->control_b = clock_type ##_CNTL_B; \ + todc_info->control_a = clock_type ##_CNTL_A; \ + todc_info->watchdog = clock_type ##_WATCHDOG; \ + todc_info->interrupts = clock_type ##_INTERRUPTS; \ + todc_info->alarm_date = clock_type ##_ALARM_DATE; \ + todc_info->alarm_hour = clock_type ##_ALARM_HOUR; \ + todc_info->alarm_minutes = clock_type ##_ALARM_MINUTES; \ + todc_info->alarm_seconds = clock_type ##_ALARM_SECONDS; \ + todc_info->century = clock_type ##_CENTURY; \ + todc_info->flags = clock_type ##_FLAGS; \ + \ + todc_info->nvram_addr_reg = clock_type ##_NVRAM_ADDR_REG; \ + todc_info->nvram_data_reg = clock_type ##_NVRAM_DATA_REG; \ +} + +extern todc_info_t *todc_info; + +unsigned char todc_direct_read_val(int addr); +void todc_direct_write_val(int addr, unsigned char val); +unsigned char todc_m48txx_read_val(int addr); +void todc_m48txx_write_val(int addr, unsigned char val); +unsigned char todc_mc146818_read_val(int addr); +void todc_mc146818_write_val(int addr, unsigned char val); + +long todc_time_init(void); +void todc_get_rtc_time(struct rtc_time *); +int todc_set_rtc_time(struct rtc_time *); +void todc_calibrate_decr(void); + +#endif /* __PPC_KERNEL_TODC_H */ diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h new file mode 100644 index 000000000000..c4c278d72f71 --- /dev/null +++ b/include/asm-powerpc/tsi108.h @@ -0,0 +1,109 @@ +/* + * include/asm-ppc/tsi108.h + * + * common routine and memory layout for Tundra TSI108(Grendel) host bridge + * memory controller. + * + * Author: Jacob Pan (jacob.pan@freescale.com) + * Alex Bounine (alexandreb@tundra.com) + * 2004 (c) Freescale Semiconductor Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __PPC_KERNEL_TSI108_H +#define __PPC_KERNEL_TSI108_H + +#include <asm/pci-bridge.h> + +/* Size of entire register space */ +#define TSI108_REG_SIZE (0x10000) + +/* Sizes of register spaces for individual blocks */ +#define TSI108_HLP_SIZE 0x1000 +#define TSI108_PCI_SIZE 0x1000 +#define TSI108_CLK_SIZE 0x1000 +#define TSI108_PB_SIZE 0x1000 +#define TSI108_SD_SIZE 0x1000 +#define TSI108_DMA_SIZE 0x1000 +#define TSI108_ETH_SIZE 0x1000 +#define TSI108_I2C_SIZE 0x400 +#define TSI108_MPIC_SIZE 0x400 +#define TSI108_UART0_SIZE 0x200 +#define TSI108_GPIO_SIZE 0x200 +#define TSI108_UART1_SIZE 0x200 + +/* Offsets within Tsi108(A) CSR space for individual blocks */ +#define TSI108_HLP_OFFSET 0x0000 +#define TSI108_PCI_OFFSET 0x1000 +#define TSI108_CLK_OFFSET 0x2000 +#define TSI108_PB_OFFSET 0x3000 +#define TSI108_SD_OFFSET 0x4000 +#define TSI108_DMA_OFFSET 0x5000 +#define TSI108_ETH_OFFSET 0x6000 +#define TSI108_I2C_OFFSET 0x7000 +#define TSI108_MPIC_OFFSET 0x7400 +#define TSI108_UART0_OFFSET 0x7800 +#define TSI108_GPIO_OFFSET 0x7A00 +#define TSI108_UART1_OFFSET 0x7C00 + +/* Tsi108 registers used by common code components */ +#define TSI108_PCI_CSR (0x004) +#define TSI108_PCI_IRP_CFG_CTL (0x180) +#define TSI108_PCI_IRP_STAT (0x184) +#define TSI108_PCI_IRP_ENABLE (0x188) +#define TSI108_PCI_IRP_INTAD (0x18C) + +#define TSI108_PCI_IRP_STAT_P_INT (0x00400000) +#define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000) + +#define TSI108_CG_PWRUP_STATUS (0x234) + +#define TSI108_PB_ISR (0x00C) +#define TSI108_PB_ERRCS (0x404) +#define TSI108_PB_AERR (0x408) + +#define TSI108_PB_ERRCS_ES (1 << 1) +#define TSI108_PB_ISR_PBS_RD_ERR (1 << 8) + +#define TSI108_PCI_CFG_BASE_PHYS (0xfb000000) +#define TSI108_PCI_CFG_SIZE (0x01000000) +/* Global variables */ + +extern u32 tsi108_pci_cfg_base; +/* Exported functions */ + +extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base); +extern unsigned long tsi108_get_mem_size(void); +extern unsigned long tsi108_get_cpu_clk(void); +extern unsigned long tsi108_get_sdc_clk(void); +extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val); +extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 * val); +extern void tsi108_clear_pci_error(u32 pci_cfg_base); + +extern phys_addr_t get_csrbase(void); + +typedef struct { + u32 regs; /* hw registers base address */ + u32 phyregs; /* phy registers base address */ + u16 phy; /* phy address */ + u16 irq_num; /* irq number */ + u8 mac_addr[6]; /* phy mac address */ +} hw_info; + +extern u32 get_vir_csrbase(void); +extern u32 tsi108_csr_vir_base; + +extern inline u32 tsi108_read_reg(u32 reg_offset) +{ + return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset)); +} + +extern inline void tsi108_write_reg(u32 reg_offset, u32 val) +{ + out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val); +} + +#endif /* __PPC_KERNEL_TSI108_H */ diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h index 19a1517ac43b..55e57844fa78 100644 --- a/include/asm-powerpc/udbg.h +++ b/include/asm-powerpc/udbg.h @@ -42,7 +42,8 @@ extern void __init udbg_init_debug_lpar(void); extern void __init udbg_init_pmac_realmode(void); extern void __init udbg_init_maple_realmode(void); extern void __init udbg_init_iseries(void); -extern void __init udbg_init_rtas(void); +extern void __init udbg_init_rtas_panel(void); +extern void __init udbg_init_rtas_console(void); #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_UDBG_H */ diff --git a/kernel/kexec.c b/kernel/kexec.c index 58f0f382597c..50087ecf337e 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -1042,7 +1042,6 @@ asmlinkage long compat_sys_kexec_load(unsigned long entry, void crash_kexec(struct pt_regs *regs) { - struct kimage *image; int locked; @@ -1056,12 +1055,11 @@ void crash_kexec(struct pt_regs *regs) */ locked = xchg(&kexec_lock, 1); if (!locked) { - image = xchg(&kexec_crash_image, NULL); - if (image) { + if (kexec_crash_image) { struct pt_regs fixed_regs; crash_setup_regs(&fixed_regs, regs); machine_crash_shutdown(&fixed_regs); - machine_kexec(image); + machine_kexec(kexec_crash_image); } xchg(&kexec_lock, 0); } |
