blackbird-op-linux/tools/arch/x86/lib, branch master

x86/decoder: Add TEST opcode to Group3-2

2020-01-22T11:17:32+00:00

Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does. Commit 12a78d43de76 ("x86/decoder: Add new TEST instruction pattern") added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did not add f7 XX/001/XXX (Group 3-2). Actually, this TEST opcode variant (ModRM.reg /1) is not described in the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3, Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map. Without this fix, Randy found a warning by insn_decoder_test related to this issue as below. HOSTCC arch/x86/tools/insn_decoder_test HOSTCC arch/x86/tools/insn_sanity TEST posttest arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this. arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00 testl $0x80100,(%rbx) arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2 arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures TEST posttest arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c) To fix this error, add the TEST opcode according to AMD64 APM Vol.3. [ bp: Massage commit message. ] Reported-by: Randy Dunlap Signed-off-by: Masami Hiramatsu Signed-off-by: Borislav Petkov Acked-by: Randy Dunlap Tested-by: Randy Dunlap Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2

perf bench: Update the copies of x86's mem{cpy,set}_64.S

2019-12-02T14:40:57+00:00

And update linux/linkage.h, which requires in turn that we make these files switch from ENTRY()/ENDPROC() to SYM_FUNC_START()/SYM_FUNC_END(): tools/perf/arch/arm64/tests/regs_load.S tools/perf/arch/arm/tests/regs_load.S tools/perf/arch/powerpc/tests/regs_load.S tools/perf/arch/x86/tests/regs_load.S We also need to switch SYM_FUNC_START_LOCAL() to SYM_FUNC_START() for the functions used directly by 'perf bench', and update tools/perf/check_headers.sh to ignore those changes when checking if the kernel original files drifted from the copies we carry. This is to get the changes from: 6dcc5627f6ae ("x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*") ef1e03152cb0 ("x86/asm: Make some functions local") e9b9d020c487 ("x86/asm: Annotate aliases") And address these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S' diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S Cc: Adrian Hunter Cc: Borislav Petkov Cc: Jiri Olsa Cc: Jiri Slaby Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-tay3l8x8k11p7y3qcpqh9qh5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

x86/insn: Add some more Intel instructions to the opcode map

2019-11-26T14:07:46+00:00

Add to the opcode map the following instructions: v4fmaddps v4fmaddss v4fnmaddps v4fnmaddss vaesdec vaesdeclast vaesenc vaesenclast vcvtne2ps2bf16 vcvtneps2bf16 vdpbf16ps gf2p8affineinvqb vgf2p8affineinvqb gf2p8affineqb vgf2p8affineqb gf2p8mulb vgf2p8mulb vp2intersectd vp2intersectq vp4dpwssd vp4dpwssds vpclmulqdq vpcompressb vpcompressw vpdpbusd vpdpbusds vpdpwssd vpdpwssds vpexpandb vpexpandw vpopcntb vpopcntd vpopcntq vpopcntw vpshldd vpshldq vpshldvd vpshldvq vpshldvw vpshldw vpshrdd vpshrdq vpshrdvd vpshrdvq vpshrdvw vpshrdw vpshufbitqmb For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test e.g. $ perf test -v "new " 2>&1 | grep -i 'v4fmaddps' Decoded ok: 62 f2 7f 48 9a 20 v4fmaddps (%eax),%zmm0,%zmm4 Decoded ok: 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%eax,%ecx,8),%zmm0,%zmm4 Decoded ok: 62 f2 7f 48 9a 20 v4fmaddps (%rax),%zmm0,%zmm4 Decoded ok: 67 62 f2 7f 48 9a 20 v4fmaddps (%eax),%zmm0,%zmm4 Decoded ok: 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%rax,%rcx,8),%zmm0,%zmm4 Decoded ok: 67 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%eax,%ecx,8),%zmm0,%zmm4 Signed-off-by: Adrian Hunter Acked-by: Masami Hiramatsu Cc: Andi Kleen Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Jiri Olsa Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Yu-cheng Yu Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20191125125044.31879-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo

Merge branch 'x86/core' into perf/core, to resolve conflicts and to pick up completed topic tree

2019-11-25T08:09:27+00:00

Conflicts: tools/perf/check-headers.sh Signed-off-by: Ingo Molnar

x86/insn: Add some Intel instructions to the opcode map

2019-11-18T21:54:45+00:00

Add to the opcode map the following instructions: cldemote tpause umonitor umwait movdiri movdir64b enqcmd enqcmds encls enclu enclv pconfig wbnoinvd For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test as folllows: $ perf test -v "new " 2>&1 | grep -i cldemote Decoded ok: 0f 1c 00 cldemote (%eax) Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8) Decoded ok: 0f 1c 00 cldemote (%rax) Decoded ok: 41 0f 1c 00 cldemote (%r8) Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8) Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8) $ perf test -v "new " 2>&1 | grep -i tpause Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 41 0f ae f0 tpause %r8d $ perf test -v "new " 2>&1 | grep -i umonitor Decoded ok: 67 f3 0f ae f0 umonitor %ax Decoded ok: f3 0f ae f0 umonitor %eax Decoded ok: 67 f3 0f ae f0 umonitor %eax Decoded ok: f3 0f ae f0 umonitor %rax Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d $ perf test -v "new " 2>&1 | grep -i umwait Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 41 0f ae f0 umwait %r8d $ perf test -v "new " 2>&1 | grep -i movdiri Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx) Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax) Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx) Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax) $ perf test -v "new " 2>&1 | grep -i movdir64b Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmd Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmds Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i encls Decoded ok: 0f 01 cf encls Decoded ok: 0f 01 cf encls $ perf test -v "new " 2>&1 | grep -i enclu Decoded ok: 0f 01 d7 enclu Decoded ok: 0f 01 d7 enclu $ perf test -v "new " 2>&1 | grep -i enclv Decoded ok: 0f 01 c0 enclv Decoded ok: 0f 01 c0 enclv $ perf test -v "new " 2>&1 | grep -i pconfig Decoded ok: 0f 01 c5 pconfig Decoded ok: 0f 01 c5 pconfig $ perf test -v "new " 2>&1 | grep -i wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Signed-off-by: Adrian Hunter Reviewed-by: Andi Kleen Acked-by: Masami Hiramatsu Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Jiri Olsa Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo

x86: xen: insn: Decode Xen and KVM emulate-prefix signature

2019-10-17T19:31:57+00:00

Decode Xen and KVM's emulate-prefix signature by x86 insn decoder. It is called "prefix" but actually not x86 instruction prefix, so this adds insn.emulate_prefix_size field instead of reusing insn.prefixes. If x86 decoder finds a special sequence of instructions of XEN_EMULATE_PREFIX and 'ud2a; .ascii "kvm"', it just counts the length, set insn.emulate_prefix_size and fold it with the next instruction. In other words, the signature and the next instruction is treated as a single instruction. Signed-off-by: Masami Hiramatsu Signed-off-by: Peter Zijlstra (Intel) Acked-by: Josh Poimboeuf Cc: Juergen Gross Cc: x86@kernel.org Cc: Boris Ostrovsky Cc: Ingo Molnar Cc: Stefano Stabellini Cc: Andrew Cooper Cc: Borislav Petkov Cc: xen-devel@lists.xenproject.org Cc: Randy Dunlap Link: https://lkml.kernel.org/r/156777564986.25081.4964537658500952557.stgit@devnote2

perf intel-pt: Use shared x86 insn decoder

2019-09-01T01:27:52+00:00

Now that there's a common version of the decoder for all tools, use it instead of the local copy. Also use perf's check-headers.sh script to diff the decoder files to make sure they remain in sync with the kernel version. Objtool has a similar check. Committer notes: Had to keep this all pointing explicitely to x86 headers/files, i.e. instead of asm/isnn.h we had to use ../include/asm/insn.h when the files were in differemt dirs, or just replace "" with "foo.h". This way we continue to be able to process perf.data files with Intel PT traces in distros other than x86. Also fixed up the awk script paths to use $(srcdir)/tools/arch instead or relative directories so that we keep detached tarballs (make help | grep perf) working. For now the include lines in these headers are being ignored so as not to flag false reports of kernel/tools out of sync. Signed-off-by: Josh Poimboeuf Reviewed-by: Masami Hiramatsu Acked-by: Peter Zijlstra (Intel) Cc: Adrian Hunter Cc: Jiri Olsa Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/8a37e615d2880f039505d693d1e068a009358a2b.1567118001.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo

objtool: Move x86 insn decoder to a common location

2019-09-01T01:27:52+00:00

The kernel tree has three identical copies of the x86 instruction decoder. Two of them are in the tools subdir. The tools subdir is supposed to be completely standalone and separate from the kernel. So having at least one copy of the kernel decoder in the tools subdir is unavoidable. However, we don't need *two* of them. Move objtool's copy of the decoder to a shared location, so that perf will also be able to use it. Signed-off-by: Josh Poimboeuf Reviewed-by: Masami Hiramatsu Acked-by: Peter Zijlstra (Intel) Cc: Adrian Hunter Cc: Jiri Olsa Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/55b486b88f6bcd0c9a2a04b34f964860c8390ca8.1567118001.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo

treewide: Add SPDX license identifier for missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'

2019-05-15T19:36:46+00:00

To bring in the change made in this cset: b69656fa7ea2 ("x86/uaccess: Fix up the fixup") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S No changes in the tooling using this, that was just to ease some objtool return checking. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: https://lkml.kernel.org/n/tip-j0mxgqkuibhw5qid9saaspdu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo