blackbird-op-linux/net/bridge, branch v5.3

bridge/mdb: remove wrong use of NLM_F_MULTI

2019-09-10T08:10:53+00:00

NLM_F_MULTI must be used only when a NLMSG_DONE message is sent at the end. In fact, NLMSG_DONE is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: 949f1e39a617 ("bridge: mdb: notify on router port add and del") CC: Nikolay Aleksandrov Signed-off-by: Nicolas Dichtel Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

netfilter: bridge: Drops IPv6 packets if IPv6 module is not loaded

2019-09-02T21:19:27+00:00

A kernel panic can happen if a host has disabled IPv6 on boot and have to process guest packets (coming from a bridge) using it's ip6tables. IPv6 packets need to be dropped if the IPv6 module is not loaded, and the host ip6tables will be used. Signed-off-by: Leonardo Bras Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso

netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder

2019-08-30T00:49:04+00:00

Get the vlan_proto of ingress bridge in network byteorder as userspace expects. Otherwise this is inconsistent with NFT_META_PROTOCOL. Fixes: 2a3a93ef0ba5 ("netfilter: nft_meta_bridge: Add NFT_META_BRI_IIFVPROTO support") Signed-off-by: wenxu Signed-off-by: Pablo Neira Ayuso

netfilter: ebtables: Fix argument order to ADD_COUNTER

2019-08-19T07:34:20+00:00

The ordering of arguments to the x_tables ADD_COUNTER macro appears to be wrong in ebtables (cf. ip_tables.c, ip6_tables.c, and arp_tables.c). This causes data corruption in the ebtables userspace tools because they get incorrect packet & byte counts from the kernel. Fixes: d72133e628803 ("netfilter: ebtables: use ADD_COUNTER macro") Signed-off-by: Todd Seidelmann Signed-off-by: Pablo Neira Ayuso

net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER

2019-08-05T20:32:53+00:00

Most of the bridge device's vlan init bugs come from the fact that its default pvid is created at the wrong time, way too early in ndo_init() before the device is even assigned an ifindex. It introduces a bug when the bridge's dev_addr is added as fdb during the initial default pvid creation the notification has ifindex/NDA_MASTER both equal to 0 (see example below) which really makes no sense for user-space[0] and is wrong. Usually user-space software would ignore such entries, but they are actually valid and will eventually have all necessary attributes. It makes much more sense to send a notification *after* the device has registered and has a proper ifindex allocated rather than before when there's a chance that the registration might still fail or to receive it with ifindex/NDA_MASTER == 0. Note that we can remove the fdb flush from br_vlan_flush() since that case can no longer happen. At NETDEV_REGISTER br->default_pvid is always == 1 as it's initialized by br_vlan_init() before that and at NETDEV_UNREGISTER it can be anything depending why it was called (if called due to NETDEV_REGISTER error it'll still be == 1, otherwise it could be any value changed during the device life time). For the demonstration below a small change to iproute2 for printing all fdb notifications is added, because it contained a workaround not to show entries with ifindex == 0. Command executed while monitoring: $ ip l add br0 type bridge Before (both ifindex and master == 0): $ bridge monitor fdb 36:7e:8a:b3:56:ba dev * vlan 1 master * permanent After (proper br0 ifindex): $ bridge monitor fdb e6:2a:ae:7a:b7:48 dev br0 vlan 1 master br0 permanent v4: move only the default pvid init/deinit to NETDEV_REGISTER/UNREGISTER v3: send the correct v2 patch with all changes (stub should return 0) v2: on error in br_vlan_init set br->vlgrp to NULL and return 0 in the br_vlan_bridge_event stub when bridge vlans are disabled [0] https://bugzilla.kernel.org/show_bug.cgi?id=204389 Reported-by: michael-dev Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid") Signed-off-by: Nikolay Aleksandrov Acked-by: Roopa Prabhu Signed-off-by: David S. Miller

net: bridge: mcast: don't delete permanent entries when fast leave is enabled

2019-07-31T23:03:01+00:00

When permanent entries were introduced by the commit below, they were exempt from timing out and thus igmp leave wouldn't affect them unless fast leave was enabled on the port which was added before permanent entries existed. It shouldn't matter if fast leave is enabled or not if the user added a permanent entry it shouldn't be deleted on igmp leave. Before: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show $ After: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent Fixes: ccb1c31a7a87 ("bridge: add flags to distinguish permanent mdb entires") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf

2019-07-31T15:49:09+00:00

Pablo Neira Ayuso says: ==================== netfilter fixes for net The following patchset contains Netfilter fixes for your net tree: 1) memleak in ebtables from the error path for the 32/64 compat layer, from Florian Westphal. 2) Fix inverted meta ifname/ifidx matching when no interface is set on either from the input/output path, from Phil Sutter. 3) Remove goto label in nft_meta_bridge, also from Phil. 4) Missing include guard in xt_connlabel, from Masahiro Yamada. 5) Two patch to fix ipset destination MAC matching coming from Stephano Brivio, via Jozsef Kadlecsik. 6) Fix set rename and listing concurrency problem, from Shijie Luo. Patch also coming via Jozsef Kadlecsik. 7) ebtables 32/64 compat missing base chain policy in rule count, from Florian Westphal. ==================== Signed-off-by: David S. Miller

netfilter: ebtables: also count base chain policies

2019-07-30T11:37:44+00:00

ebtables doesn't include the base chain policies in the rule count, so we need to add them manually when we call into the x_tables core to allocate space for the comapt offset table. This lead syzbot to trigger: WARNING: CPU: 1 PID: 9012 at net/netfilter/x_tables.c:649 xt_compat_add_offset.cold+0x11/0x36 net/netfilter/x_tables.c:649 Reported-by: syzbot+276ddebab3382bbf72db@syzkaller.appspotmail.com Fixes: 2035f3ff8eaa ("netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso

net: bridge: delete local fdb on device init failure

2019-07-29T16:50:05+00:00

On initialization failure we have to delete the local fdb which was inserted due to the default pvid creation. This problem has been present since the inception of default_pvid. Note that currently there are 2 cases: 1) in br_dev_init() when br_multicast_init() fails 2) if register_netdevice() fails after calling ndo_init() This patch takes care of both since br_vlan_flush() is called on both occasions. Also the new fdb delete would be a no-op on normal bridge device destruction since the local fdb would've been already flushed by br_dev_delete(). This is not an issue for ports since nbp_vlan_init() is called last when adding a port thus nothing can fail after it. Reported-by: syzbot+88533dc8b582309bf3ee@syzkaller.appspotmail.com Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

netfilter: nft_meta_bridge: Eliminate 'out' label

2019-07-25T06:38:29+00:00

The label is used just once and the code it points at is not reused, no point in keeping it. Signed-off-by: Phil Sutter Signed-off-by: Pablo Neira Ayuso