blackbird-op-linux/drivers/net/ethernet/intel/i40e, branch master

i40e: Fix the conditional for i40e_vc_validate_vqs_bitmaps

2020-02-12T01:03:52+00:00

Commit d9d6a9aed3f6 ("i40e: Fix virtchnl_queue_select bitmap validation") introduced a necessary change for verifying how queue bitmaps from the iavf driver get validated. Unfortunately, the conditional was reversed. Fix this. Fixes: d9d6a9aed3f6 ("i40e: Fix virtchnl_queue_select bitmap validation") Signed-off-by: Brett Creeley Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller

i40e: Relax i40e_xsk_wakeup's return value when PF is busy

2020-02-05T21:06:08+00:00

Return -EAGAIN instead of -ENETDOWN to provide a slightly milder information to user space so that an application will know to retry the syscall when __I40E_CONFIG_BUSY bit is set on pf->state. Fixes: b3873a5be757 ("net/i40e: Fix concurrency issues between config flow and XSK") Signed-off-by: Maciej Fijalkowski Signed-off-by: Daniel Borkmann Acked-by: Björn Töpel Link: https://lore.kernel.org/bpf/20200205045834.56795-2-maciej.fijalkowski@intel.com

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-01-26T09:40:21+00:00

Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller

i40e: fix spelling mistake "to" -> "too"

2020-01-24T07:12:06+00:00

There is a spelling mistake in a hw_dbg message. Fix it. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller

Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net

2020-01-19T21:10:04+00:00

i40e: Removing hung_queue variable to use txqueue function parameter

2020-01-17T17:55:34+00:00

The scope of function .ndo_tx_timeout was changed to include the hang queue when a TX timeout event occurs. See commit 0290bd291cc0 ("netdev: pass the stuck queue to the timeout handler") for more details. Now, drivers don't need to identify which queue is stopped. Drivers can simply use the queue index provided by dev_watchdog and execute all actions needed to restore network traffic. This commit do some cleanups into Intel i40e driver to remove a redundant loop to find stopped queue. Signed-off-by: Julio Faracco Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher

i40e: Set PHY Access flag on X722

2020-01-09T17:21:40+00:00

The X722 FW API version 1.9 adds support for accessing PHY registers with Admin Queue Command. This enables reading EEPROM data from (Q)SFP+ transceivers, what was previously possible only on X710 devices. Signed-off-by: Adam Ludkiewicz Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher

i40e: Fix virtchnl_queue_select bitmap validation

2020-01-09T17:21:40+00:00

Currently in i40e_vc_disable_queues_msg() we are incorrectly validating the virtchnl queue select bitmaps. The virtchnl_queue_select rx_queues and tx_queue bitmap is being compared against ICE_MAX_VF_QUEUES, but the problem is that these bitmaps can have a value greater than I40E_MAX_VF_QUEUES. Fix this by comparing the bitmaps against BIT(I40E_MAX_VF_QUEUES). Also, add the function i40e_vc_validate_vqs_bitmaps() that checks to see if both virtchnl_queue_select bitmaps are empty along with checking that the bitmaps only have valid bits set. This function can then be used in both the queue enable and disable flows. Suggested-by: Arkady Gilinksky Signed-off-by: Brett Creeley Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2019-12-27T22:20:10+00:00

Daniel Borkmann says: ==================== pull-request: bpf-next 2019-12-27 The following pull-request contains BPF updates for your *net-next* tree. We've added 127 non-merge commits during the last 17 day(s) which contain a total of 110 files changed, 6901 insertions(+), 2721 deletions(-). There are three merge conflicts. Conflicts and resolution looks as follows: 1) Merge conflict in net/bpf/test_run.c: There was a tree-wide cleanup c593642c8be0 ("treewide: Use sizeof_field() macro") which gets in the way with b590cb5f802d ("bpf: Switch to offsetofend in BPF_PROG_TEST_RUN"): <<<<<<< HEAD if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) + sizeof_field(struct __sk_buff, priority), ======= if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority), >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c There are a few occasions that look similar to this. Always take the chunk with offsetofend(). Note that there is one where the fields differ in here: <<<<<<< HEAD if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) + sizeof_field(struct __sk_buff, tstamp), ======= if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs), >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to 850a88cc4096 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN"). 2) Merge conflict in arch/riscv/net/bpf_jit_comp.c: (I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.) <<<<<<< HEAD if (is_13b_check(off, insn)) return -1; emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx); ======= emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx); >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Result should look like: emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx); 3) Merge conflict in arch/riscv/include/asm/pgtable.h: <<<<<<< HEAD ======= #define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE) #define BPF_JIT_REGION_END (VMALLOC_END) /* * Roughly size the vmemmap space to be large enough to fit enough * struct pages to map half the virtual address space. Then * position vmemmap directly below the VMALLOC region. */ #define VMEMMAP_SHIFT \ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) #define VMEMMAP_END (VMALLOC_START - 1) #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) #define vmemmap ((struct page *)VMEMMAP_START) >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Only take the BPF_* defines from there and move them higher up in the same file. Remove the rest from the chunk. The VMALLOC_* etc defines got moved via 01f52e16b868 ("riscv: define vmemmap before pfn_to_page calls"). Result: [...] #define __S101 PAGE_READ_EXEC #define __S110 PAGE_SHARED_EXEC #define __S111 PAGE_SHARED_EXEC #define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE) #define BPF_JIT_REGION_END (VMALLOC_END) /* * Roughly size the vmemmap space to be large enough to fit enough * struct pages to map half the virtual address space. Then * position vmemmap directly below the VMALLOC region. */ #define VMEMMAP_SHIFT \ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) #define VMEMMAP_END (VMALLOC_START - 1) #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) [...] Let me know if there are any other issues. Anyway, the main changes are: 1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific to a provided BPF object file. This provides an alternative, simplified API compared to standard libbpf interaction. Also, add libbpf extern variable resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko. 2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also, add various BPF riscv JIT improvements, from Björn Töpel. 3) Extend bpftool to allow matching BPF programs and maps by name, from Paul Chaignon. 4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI flag for allowing updates without service interruption, from Andrey Ignatov. 5) Cleanup and simplification of ring access functions for AF_XDP with a bonus of 0-5% performance improvement, from Magnus Karlsson. 6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa. 7) Move and extend test_select_reuseport into BPF program tests under BPF selftests, from Jakub Sitnicki. 8) Various BPF sample improvements for xdpsock for customizing parameters to set up and benchmark AF_XDP, from Jay Jayatheerthan. 9) Improve libbpf to provide a ulimit hint on permission denied errors. Also change XDP sample programs to attach in driver mode by default, from Toke Høiland-Jørgensen. 10) Extend BPF test infrastructure to allow changing skb mark from tc BPF programs, from Nikita V. Shirokov. 11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King. 12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after libbpf conversion, from Jesper Dangaard Brouer. 13) Minor misc improvements from various others. ==================== Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-12-22T23:15:05+00:00

Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller