blackbird-op-linux/drivers/net/dsa/Kconfig, branch master

net: dsa: vsc73xx: Remove dependency on CONFIG_OF

2020-01-05T22:23:48+00:00

There is no build time dependency on CONFIG_OF, but we do need to make sure we gate the initialization of the gpio_chip::of_node member with a proper check on CONFIG_OF_GPIO. This enables the driver to build on platforms that do not have CONFIG_OF enabled. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: add support for Atheros AR9331 built-in switch

2019-12-21T01:05:47+00:00

Provide basic support for Atheros AR9331 built-in switch. So far it works as port multiplexer without any hardware offloading support. Reviewed-by: Andrew Lunn Reviewed-by: Vivien Didelot Signed-off-by: Oleksij Rempel Signed-off-by: David S. Miller

net: dsa: ocelot: add driver for Felix switch family

2019-11-15T20:32:16+00:00

This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: LAN9303: select REGMAP when LAN9303 enable

2019-10-29T23:17:02+00:00

When NET_DSA_SMSC_LAN9303=y and NET_DSA_SMSC_LAN9303_MDIO=y, below errors can be seen: drivers/net/dsa/lan9303_mdio.c:87:23: error: REGMAP_ENDIAN_LITTLE undeclared here (not in a function) .reg_format_endian = REGMAP_ENDIAN_LITTLE, drivers/net/dsa/lan9303_mdio.c:93:3: error: const struct regmap_config has no member named reg_read .reg_read = lan9303_mdio_read, It should select REGMAP in config NET_DSA_SMSC_LAN9303. Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Mao Wenan Signed-off-by: David S. Miller

net: dsa: vsc73xx: fix NET_DSA and OF dependencies

2019-07-09T20:19:53+00:00

The restructuring of the driver got the dependencies wrong: without CONFIG_NET_DSA we get this build failure: WARNING: unmet direct dependencies detected for NET_DSA_VITESSE_VSC73XX Depends on [n]: NETDEVICES [=y] && HAVE_NET_DSA [=y] && OF [=y] && NET_DSA [=n] Selected by [m]: - NET_DSA_VITESSE_VSC73XX_PLATFORM [=m] && NETDEVICES [=y] && HAVE_NET_DSA [=y] && HAS_IOMEM [=y] ERROR: "dsa_unregister_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined! ERROR: "dsa_switch_alloc" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined! ERROR: "dsa_register_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined! Add the appropriate dependencies. Fixes: 95711cd5f0b4 ("net: dsa: vsc73xx: Split vsc73xx driver") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller

net: dsa: vsc73xx: add support for parallel mode

2019-07-07T21:16:32+00:00

This patch add platform part of vsc73xx driver. It allows to use chip connected to a parallel memory bus and work in memory-mapped I/O mode. (aka PI bus in chip manual) By default device is working in big endian mode. Signed-off-by: Pawel Dembicki Reviewed-by: Linus Walleij Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: vsc73xx: Split vsc73xx driver

2019-07-07T21:16:32+00:00

This driver (currently) only takes control of the switch chip over SPI and configures it to route packages around when connected to a CPU port. But Vitesse chip support also parallel interface. This patch split driver into two parts: core and spi. It is required for add support to another managing interface. Tested-by: Linus Walleij Signed-off-by: Pawel Dembicki Reviewed-by: Linus Walleij Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch

2019-05-03T14:49:17+00:00

At this moment the following is supported: * Link state management through phylib * Autonomous L2 forwarding managed through iproute2 bridge commands. IP termination must be done currently through the master netdevice, since the switch is unmanaged at this point and using DSA_TAG_PROTO_NONE. Signed-off-by: Vladimir Oltean Signed-off-by: Georg Waibel Acked-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: mv88e6060: Remove support for legacy probing

2019-05-01T03:13:33+00:00

Now that the driver can be probed as an mdio device, remove the legacy DSA platform device probing. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller