blackbird-op-linux/drivers/mtd/devices, branch master

Merge tag 'mtd/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

2020-01-30T23:46:02+00:00

Pull MTD updates from Miquel Raynal: "MTD core - block2mtd: page index should use pgoff_t - maps: physmap: minimal Runtime PM support - maps: pcmciamtd: avoid possible sleep-in-atomic-context bugs - concat: Fix a comment referring to an unknown symbol Raw NAND: - Macronix: Use match_string() helper - Atmel: switch to using devm_fwnode_gpiod_get() - Denali: rework the SKIP_BYTES feature and add reset controlling - Brcmnand: set appropriate DMA mask - Cadence: add unspecified HAS_IOMEM dependency - Various cleanup. Onenand: - Rename Samsung and Omap2 drivers to avoid possible build warnings - Enable compile testing - Various build issues - Kconfig cleanup SPI-NAND: - Support for Toshiba TC58CVG2S0HRAIJ SPI-NOR: - Add support for TB selection using SR bit 6, - Add support for few flashes" * tag 'mtd/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (41 commits) mtd: concat: Fix a comment referring to an unknown symbol mtd: rawnand: add unspecified HAS_IOMEM dependency mtd: block2mtd: page index should use pgoff_t mtd: maps: physmap: Add minimal Runtime PM support mtd: maps: pcmciamtd: fix possible sleep-in-atomic-context bugs in pcmciamtd_set_vpp() mtd: onenand: Rename omap2 driver to avoid a build warning mtd: onenand: Use a better name for samsung driver mtd: rawnand: atmel: switch to using devm_fwnode_gpiod_get() mtd: spinand: add support for Toshiba TC58CVG2S0HRAIJ mtd: rawnand: macronix: Use match_string() helper to simplify the code mtd: sharpslpart: Fix unsigned comparison to zero mtd: onenand: Enable compile testing of OMAP and Samsung drivers mtd: onenand: samsung: Fix printing format for size_t on 64-bit mtd: onenand: samsung: Fix pointer cast -Wpointer-to-int-cast warnings on 64 bit mtd: rawnand: denali: remove hard-coded DENALI_DEFAULT_OOB_SKIP_BYTES mtd: rawnand: denali_dt: add reset controlling dt-bindings: mtd: denali_dt: document reset property mtd: rawnand: denali_dt: Add support for configuring SPARE_AREA_SKIP_BYTES mtd: rawnand: denali_dt: error out if platform has no associated data mtd: rawnand: brcmnand: Set appropriate DMA mask ...

mtd: block2mtd: page index should use pgoff_t

2020-01-27T15:55:41+00:00

Page index use pgoff_t to prevent risk of truncation. Signed-off-by: Liu Song Signed-off-by: Miquel Raynal

remove ioremap_nocache and devm_ioremap_nocache

2020-01-06T08:45:59+00:00

ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig Acked-by: Arnd Bergmann

mtd: devices: fix mchp23k256 read and write

2019-11-14T09:58:03+00:00

Due to the use of sizeof(), command size set for the spi transfer was wrong. Driver was sending and receiving always 1 byte less and especially on write, it was hanging. echo -n -e "\\x1\\x2\\x3\\x4" > /dev/mtd1 And read part too now works as expected. hexdump -C -n16 /dev/mtd1 00000000 01 02 03 04 ab f3 ad c2 ab e3 f4 36 dd 38 04 15 00000010 Fixes: 4379075a870b ("mtd: mchp23k256: Add support for mchp23lcv1024") Signed-off-by: Angelo Dureghello Reviewed-by: Andrew Lunn Signed-off-by: Miquel Raynal

mtd: spear_smi: Fix Write Burst mode

2019-10-29T13:24:55+00:00

Any write with either dd or flashcp to a device driven by the spear_smi.c driver will pass through the spear_smi_cpy_toio() function. This function will get called for chunks of up to 256 bytes. If the amount of data is smaller, we may have a problem if the data length is not 4-byte aligned. In this situation, the kernel panics during the memcpy: # dd if=/dev/urandom bs=1001 count=1 of=/dev/mtd6 spear_smi_cpy_toio [620] dest c9070000, src c7be8800, len 256 spear_smi_cpy_toio [620] dest c9070100, src c7be8900, len 256 spear_smi_cpy_toio [620] dest c9070200, src c7be8a00, len 256 spear_smi_cpy_toio [620] dest c9070300, src c7be8b00, len 233 Unhandled fault: external abort on non-linefetch (0x808) at 0xc90703e8 [...] PC is at memcpy+0xcc/0x330 The above error occurs because the implementation of memcpy_toio() tries to optimize the number of I/O by writing 4 bytes at a time as much as possible, until there are less than 4 bytes left and then switches to word or byte writes. Unfortunately, the specification states about the Write Burst mode: "the next AHB Write request should point to the next incremented address and should have the same size (byte, half-word or word)" This means ARM architecture implementation of memcpy_toio() cannot reliably be used blindly here. Workaround this situation by update the write path to stick to byte access when the burst length is not multiple of 4. Fixes: f18dbbb1bfe0 ("mtd: ST SPEAr: Add SMI driver for serial NOR flash") Cc: Russell King Cc: Boris Brezillon Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Reviewed-by: Russell King

mtd: st_spi_fsm: remove unused field from struct stfsm

2019-10-08T17:22:03+00:00

The 'region' field in struct stfsm is unused and can be removed. Signed-off-by: Bartosz Golaszewski Signed-off-by: Miquel Raynal

mtd: spear_smi: remove set but not used variable 'flash_info'

2019-10-08T17:13:30+00:00

Fixes gcc '-Wunused-but-set-variable' warning: drivers/mtd/devices/spear_smi.c: In function spear_smi_probe_config_dt: drivers/mtd/devices/spear_smi.c:780:32: warning: variable flash_info set but not used [-Wunused-but-set-variable] It is not used since commit 6551ab5d30d6 ("mtd: add device-tree support to spear_smi") Reported-by: Hulk Robot Signed-off-by: zhengbin Signed-off-by: Miquel Raynal

mtd: Remove dev_err() usage after platform_get_irq()

2019-10-08T17:01:49+00:00

We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // While we're here, remove braces on if statements that only have one statement (manually). Cc: David Woodhouse Cc: Brian Norris Cc: Marek Vasut Cc: Miquel Raynal Cc: Richard Weinberger Cc: Vignesh Raghavendra Cc: linux-mtd@lists.infradead.org Cc: Greg Kroah-Hartman Signed-off-by: Stephen Boyd Signed-off-by: Miquel Raynal

mtd: pmc551: Remove set but not used variable 'soff_lo'

2019-09-15T21:51:07+00:00

Fixes gcc '-Wunused-but-set-variable' warning: drivers/mtd/devices/pmc551.c: In function pmc551_erase: drivers/mtd/devices/pmc551.c:142:15: warning: variable soff_lo set but not used [-Wunused-but-set-variable] drivers/mtd/devices/pmc551.c: In function pmc551_read: drivers/mtd/devices/pmc551.c:232:15: warning: variable soff_lo set but not used [-Wunused-but-set-variable] drivers/mtd/devices/pmc551.c: In function pmc551_write: drivers/mtd/devices/pmc551.c:289:15: warning: variable soff_lo set but not used [-Wunused-but-set-variable] It is not used since commit cdf0a7d16980 ("[MTD] pmc551 whitespace cleanup") Reported-by: Hulk Robot Signed-off-by: zhengbin Signed-off-by: Richard Weinberger

mtd: phram: Module parameters add writable permissions

2019-09-15T21:50:38+00:00

The phram code implements managing multiple devices through a linked list. However, due to the module parameter permission of 0, the /sys/module/phram/parameters/phram interface is missing. The command line arguments in insmod can only create one device. Therefore, add writable permissions to the module parameters, create /sys/module/phram/parameters/phram interface, and create multi-device support. Signed-off-by: Xiaoming Ni Signed-off-by: Richard Weinberger