blackbird-op-linux/drivers/hwmon, branch master

hwmon: (pmbus/xdpe12284) fix typo in compatible strings

2020-02-12T20:43:01+00:00

Make sure that the driver compatible strings matches the binding by removing the space between the manufacturer and model. Fixes: aaafb7c8eb1c ("hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers") Cc: Vadim Pasternak Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20200212092426.24012-1-johan@kernel.org Signed-off-by: Guenter Roeck

hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.

2020-02-10T02:41:08+00:00

Change 21537dc driver PMBus polling of MFR_COMMON from bits 5/4 to bits 6/5. This fixs a LTC297X family bug where polling always returns not busy even when the part is busy. This fixes a LTC388X and LTM467X bug where polling used PEND and NOT_IN_TRANS, and BUSY was not polled, which can lead to NACKing of commands. LTC388X and LTM467X modules now poll BUSY and PEND, increasing reliability by eliminating NACKing of commands. Signed-off-by: Mike Jones Link: https://lore.kernel.org/r/1580234400-2829-2-git-send-email-michael-a1.jones@analog.com Fixes: e04d1ce9bbb49 ("hwmon: (ltc2978) Add polling for chips requiring it") Signed-off-by: Guenter Roeck

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-02-08T22:04:19+00:00

Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...

proc: convert everything to "struct proc_ops"

2020-02-04T03:05:26+00:00

The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap

2020-01-27T21:03:00+00:00

Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap

hwmon: (k10temp) Display up to eight sets of CCD temperatures

2020-01-23T23:17:59+00:00

In HWiNFO, we see support for Tccd1, Tccd3, Tccd5, and Tccd7 temperature sensors on Zen2 based Threadripper CPUs. Checking register maps on Threadripper 3970X confirms SMN register addresses and values for those sensors. Register values observed in an idle system: 0x059950: 00000000 00000abc 00000000 00000ad8 0x059960: 00000000 00000ade 00000000 00000ae4 Under load: 0x059950: 00000000 00000c02 00000000 00000c14 0x059960: 00000000 00000c30 00000000 00000c22 More analysis shows that EPYC CPUs support up to 8 CCD temperature sensors. EPYC 7601 supports three CCD temperature sensors. Unlike Zen2 CPUs, the register space in Zen1 CPUs supports a maximum of four sensors, so only search for a maximum of four sensors on Zen1 CPUs. On top of that, in thm_10_0_sh_mask.h in the Linux kernel, we find definitions for THM_DIE{1-3}_TEMP__VALID_MASK, set to 0x00000800, as well as matching SMN addresses. This lets us conclude that bit 11 of the respective registers is a valid bit. With this assumption, the temperature offset is now 49 degrees C. This conveniently matches the documented temperature offset for Tdie, again suggesting that above registers indeed report temperatures sensor values. Assume that bit 11 is indeed a valid bit, and add support for the additional sensors. With this patch applied, output from 3970X (idle) looks as follows: k10temp-pci-00c3 Adapter: PCI adapter Tdie: +55.9°C Tctl: +55.9°C Tccd1: +39.8°C Tccd3: +43.8°C Tccd5: +43.8°C Tccd7: +44.8°C Tested-by: Michael Larabel Signed-off-by: Guenter Roeck

hwmon: (k10temp) Add debugfs support

2020-01-23T21:15:11+00:00

Show thermal and SVI registers for Family 17h CPUs. Tested-by: Sebastian Reichel Signed-off-by: Guenter Roeck

hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs

2020-01-23T21:15:11+00:00

The maximum Tdie or Tctl is not published for Ryzen CPUs. What is known, however, is that the traditional value of 70 degrees C is no longer correct. On top of that, the limit applies to Tctl, not to Tdie. Displaying it in either context is meaningless, confusing, and wrong. Stop doing it. Tested-by: Brad Campbell Tested-by: Holger Kiehl Tested-by: Michael Larabel Tested-by: Jonathan McDowell Tested-by: Ken Moffat Signed-off-by: Guenter Roeck

hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs

2020-01-23T21:15:11+00:00

Ryzen CPUs report core and SoC voltages and currents. Add support for it to the k10temp driver. For the time being, only report voltages and currents for Ryzen CPUs. Threadripper and EPYC appear to use a different mechanism. Tested-by: Brad Campbell Tested-by: Bernhard Gebetsberger Tested-by: Holger Kiehl Tested-by: Michael Larabel Tested-by: Jonathan McDowell Tested-by: Ken Moffat Tested-by: Darren Salt Signed-off-by: Guenter Roeck

hwmon: (k10temp) Report temperatures per CPU die

2020-01-23T21:15:11+00:00

Zen2 reports reporting temperatures per CPU die (called Core Complex Dies, or CCD, by AMD). Add support for it to the k10temp driver. Tested-by: Brad Campbell Tested-by: Bernhard Gebetsberger Tested-by: Holger Kiehl Tested-by: Michael Larabel Tested-by: Jonathan McDowell Tested-by: Ken Moffat Tested-by: Darren Salt Signed-off-by: Guenter Roeck