blackbird-op-linux/drivers/dma/ioat_dma.c, branch master

ioat: move to drivers/dma/ioat/

2009-07-28T21:32:12+00:00

When first created the ioat driver was the only inhabitant of drivers/dma/. Now, it is the only multi-file (more than a .c and a .h) driver in the directory. Moving it to an ioat/ subdirectory allows the naming convention to be cleaned up, and allows for future splitting of the source files by hardware version (v1, v2, and v3). Signed-off-by: Maciej Sosnowski Signed-off-by: Dan Williams

i7300_idle: allow testing on i5000-series hardware w/o re-compile

2009-05-29T00:52:40+00:00

Testing the i7300_idle driver on i5000-series hardware required an edit to i7300_idle.h to "#define SUPPORT_I5000 1" and a re-build of both i7300_idle and ioat_dma. Replace that build-time scheme with a load-time module parameter: "7300_idle.forceload=1" to make it easier to test the driver on hardware that while not officially validated, works fine and is much more commonly available. By default (no modparam) the driver will continue to load only on the i7300. Note that ioat_dma runs a copy of i7300_idle's probe routine to know to reserve an IOAT channel for i7300_idle. This change makes ioat_dma do that always on the i5000, just like it does on the i7300. Signed-off-by: Len Brown Acked-by: Andrew Henroid

ioatdma: fix "ioatdma frees DMA memory with wrong function"

2009-05-12T21:41:47+00:00

as reported by Alexander Beregalov ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000007f76f800] [size=2000 bytes] [map ped as single] [unmapped as page] The ioatdma driver was unmapping all regions (either allocated as page or single) using unmap_page. This patch lets dma driver recognize if unmap_single or unmap_page should be used. It introduces two new dma control flags: DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE. They should be set to indicate dma driver to do dma-unmapping as single (first one for the source, tha latter for the destination). If respective flag is not set, the driver assumes dma-unmapping as page. Signed-off-by: Maciej Sosnowski Reported-by: Alexander Beregalov Tested-by: Alexander Beregalov Signed-off-by: Dan Williams

dmaengine: initialize tx_list in dma_async_tx_descriptor_init

2009-03-25T16:13:24+00:00

Centralize this common initialization (and one case where ipu_idmac is duplicating ->chan initialization). Signed-off-by: Dan Williams

I/OAT: fail self-test if callback test reaches timeout

2009-03-04T23:04:40+00:00

If we miss interrupts in the self test then fail registration of this channel as it is unsuitable for use as a public channel. Signed-off-by: Maciej Sosnowski Signed-off-by: Dan Williams

I/OAT: update driver version and copyright dates

2009-03-04T23:04:40+00:00

Together with new fixes update driver version and extend copyright dates ranges. Signed-off-by: Maciej Sosnowski Signed-off-by: Shannon Nelson Acked-by: Jeff Kirsher Signed-off-by: Dan Williams

I/OAT: list usage cleanup

2009-03-04T23:04:40+00:00

Trivial cleanup, list_del(); list_add_tail() is equivalent to list_move_tail(). Semantic patch for coccinelle can be found at www.cccmz.de/~snakebyte/list_move_tail.spatch Signed-off-by: Eric Sesterhenn Signed-off-by: Maciej Sosnowski Signed-off-by: Shannon Nelson Acked-by: Jeff Kirsher Signed-off-by: Dan Williams

I/OAT: cancel watchdog before dma remove

2009-03-04T23:04:40+00:00

Channel watchdog should be canceled before the rest of dma remove stuff. Signed-off-by: Maciej Sosnowski Signed-off-by: Shannon Nelson Acked-by: Jeff Kirsher Signed-off-by: Dan Williams

I/OAT: fail initialization on zero channels detection

2009-03-04T23:04:39+00:00

On some systems with I/OAT ver.2 when DCA is disabled in BIOS situations have been observed that zero DMA channels are detected instead of four. To avoid kernel panic driver should fail gracefully with appropriate message. Signed-off-by: Maciej Sosnowski Signed-off-by: Shannon Nelson Acked-by: Jeff Kirsher Signed-off-by: Dan Williams

I/OAT: do not set DCACTRL_CMPL_WRITE_ENABLE for I/OAT ver.3

2009-03-04T23:04:39+00:00

Flag DCACTRL_CMPL_WRITE_ENABLE is valid only for I/OAT ver.2 so it should not be set for I/OAT ver.3. Signed-off-by: Maciej Sosnowski Signed-off-by: Shannon Nelson Acked-by: Jeff Kirsher Signed-off-by: Dan Williams