blackbird-op-linux/drivers/clk/samsung, branch master

clk: samsung: exynos5420: Keep top G3D clocks enabled

2019-12-24T07:50:57+00:00

In Exynos542x/5800 SoCs, the G3D leaf clocks are located in the G3D power domain. This is similar to the other hardware modules and their power domains. However there is one thing specific to G3D clocks hierarchy. Unlike other hardware modules, the G3D clocks hierarchy doesn't have any gate clock between the TOP part of the hierarchy and the part located in the power domain and some SoC internal busses are sourced directly from the TOP muxes. The consequence of this design if the fact that the TOP part of the hierarchy has to be enabled permanently to ensure proper operation of the SoC power related components (G3D power domain and Exynos Power Management Unit for system suspend/resume). This patch adds an explicit call to clk_prepare_enable() on the last MUX in the TOP part of G3D clock hierarchy to keep it enabled permanently to ensure that the internal busses get their clock regardless of the main G3D clock enablement status. This fixes following imprecise abort issue observed on Odroid XU3/XU4 after enabling Panfrost driver by commit 1a5a85c56402 "ARM: dts: exynos: Add Mali/GPU node on Exynos5420 and enable it on Odroid XU3/4"): panfrost 11800000.gpu: clock rate = 400000000 panfrost 11800000.gpu: failed to get regulator: -517 panfrost 11800000.gpu: regulator init failed -517 Power domain G3D disable failed ... panfrost 11800000.gpu: clock rate = 400000000 8<--- cut here --- Unhandled fault: imprecise external abort (0x1406) at 0x00000000 pgd = (ptrval) [00000000] *pgd=00000000 Internal error: : 1406 [#1] PREEMPT SMP ARM Modules linked in: CPU: 7 PID: 53 Comm: kworker/7:1 Not tainted 5.4.0-rc8-next-20191119-00032-g56f1001191a6 #6923 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events deferred_probe_work_func PC is at panfrost_gpu_soft_reset+0x94/0x110 LR is at ___might_sleep+0x128/0x2dc ... [] (panfrost_gpu_soft_reset) from [] (panfrost_gpu_init+0x10/0x67c) [] (panfrost_gpu_init) from [] (panfrost_device_init+0x158/0x2cc) [] (panfrost_device_init) from [] (panfrost_probe+0x80/0x178) [] (panfrost_probe) from [] (platform_drv_probe+0x48/0x9c) [] (platform_drv_probe) from [] (really_probe+0x1c4/0x474) [] (really_probe) from [] (driver_probe_device+0x78/0x1bc) [] (driver_probe_device) from [] (bus_for_each_drv+0x74/0xb8) [] (bus_for_each_drv) from [] (__device_attach+0xd4/0x16c) [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [] (bus_probe_device) from [] (deferred_probe_work_func+0x4c/0xd0) [] (deferred_probe_work_func) from [] (process_one_work+0x300/0x864) [] (process_one_work) from [] (worker_thread+0x58/0x5a0) [] (worker_thread) from [] (kthread+0x12c/0x160) [] (kthread) from [] (ret_from_fork+0x14/0x20) Exception stack(0xee03dfb0 to 0xee03dff8) ... Code: e594300c e5933020 e3130c01 1a00000f (ebefff50). ---[ end trace badde2b74a65a540 ]--- In the above case, the Panfrost driver disables G3D clocks after failure of getting the needed regulator and return with -EPROVE_DEFER code. This causes G3D power domain disable failure and then, during second probe an imprecise abort is triggered due to undefined power domain state. Fixes: 45f10dabb56b ("clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path") Fixes: c9f7567aff31 ("clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU") Signed-off-by: Marek Szyprowski Link: https://lkml.kernel.org/r/20191216131407.17225-1-m.szyprowski@samsung.com Acked-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi Acked-by: Sylwester Nawrocki Signed-off-by: Stephen Boyd

Merge branches 'clk-ti', 'clk-allwinner', 'clk-qcom', 'clk-sa' and 'clk-aspeed' into clk-next

2019-11-27T16:14:38+00:00

- Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Use struct_size() some more in various clk drivers * clk-ti: clk/ti/adpll: allocate room for terminating null ARM: dts: omap3: fix DPLL4 M4 divider max value clk: ti: divider: convert to use min,max,mask instead of width clk: ti: divider: cleanup ti_clk_parse_divider_data API clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table clk: ti: am43xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from pruss clkctrl clock clk: ti: am43xx: drop idlest polling from pruss clkctrl clock clk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap5: add IVA subsystem clkctrl data dt-bindings: clk: add omap5 iva clkctrl definitions clk: ti: clkctrl: add new exported API for checking standby info clk: ti: clkctrl: convert to use bit helper macros instead of bitops clk: ti: clkctrl: fix setting up clkctrl clocks * clk-allwinner: clk: sunxi-ng: h3: Export MBUS clock clk: sunxi-ng: h6: Allow GPU to change parent rate clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL * clk-qcom: clk: qcom: rpmh: Reuse sdm845 clks for sm8150 clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver clk: qcom: Allow constant ratio freq tables for rcg clk: qcom: smd: Add missing pnoc clock clk: qcom: Enumerate clocks and reset needed to boot the 8998 modem clk: qcom: clk-rpmh: Add support for RPMHCC for SC7180 dt-bindings: clock: Introduce RPMHCC bindings for SC7180 dt-bindings: clock: Add YAML schemas for the QCOM RPMHCC clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SC7180 dt-bindings: clock: Add sc7180 GCC clock binding dt-bindings: clock: Add YAML schemas for the QCOM GCC clock bindings clk: qcom: common: Return NULL from clk_hw OF provider clk: qcom: rcg: update the DFS macro for RCG clk: qcom: remove unneeded semicolon clk: qcom: Add Q6SSTOP clock controller for QCS404 dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings * clk-sa: drivers/clk: convert VL struct to struct_size * clk-aspeed: clk: aspeed: Add RMII RCLK gates for both AST2500 MACs clk: ast2600: Add RMII RCLK gates for all four MACs dt-bindings: clock: Add AST2600 RMII RCLK gate definitions dt-bindings: clock: Add AST2500 RMII RCLK definitions

Merge branches 'clk-hisi', 'clk-amlogic', 'clk-samsung', 'clk-renesas' and 'clk-imx' into clk-next

2019-11-27T16:14:17+00:00

* clk-hisi: clk: hi6220: use CLK_OF_DECLARE_DRIVER * clk-amlogic: clk: meson: axg-audio: use devm_platform_ioremap_resource() to simplify code clk: meson: axg_audio: add sm1 support clk: meson: axg-audio: provide clk top signal name clk: meson: axg-audio: prepare sm1 addition clk: meson: axg-audio: fix regmap last register clk: meson: axg-audio: remove useless defines dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate * clk-samsung: clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume clk: samsung: exynos5420: Add VPLL rate table clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths * clk-renesas: (23 commits) clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960 dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support clk: renesas: r8a77965: Remove superfluous semicolon dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example dt-bindings: clock: renesas: Remove R-Car Gen2 legacy DT bindings dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions clk: renesas: rcar-gen3: Switch SD clocks to .determine_rate() clk: renesas: rcar-gen3: Switch Z clocks to .determine_rate() clk: renesas: rcar-gen2: Switch Z clock to .determine_rate() clk: renesas: r8a774b1: Add TMU clock clk: renesas: cpg-mssr: Add r8a774b1 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774b1 binding clk: renesas: rcar-gen3: Loop to find best rate in cpg_sd_clock_round_rate() clk: renesas: rcar-gen3: Absorb cpg_sd_clock_calc_div() clk: renesas: rcar-gen3: Avoid double table iteration in SD .set_rate() clk: renesas: rcar-gen3: Improve arithmetic divisions clk: renesas: rcar-gen2: Improve arithmetic divisions clk: renesas: Remove R-Car Gen2 legacy DT clock support ... * clk-imx: clk: imx: imx8mq: fix sys3_pll_out_sels clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clock clk: imx: imx6ul: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sx: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sll: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx7d: use imx_obtain_fixed_clk_hw to simplify code clk: imx7ulp: Correct DDR clock mux options clk: imx7ulp: Correct system clock source option #7 clk: imx: imx8mq: mark sys1/2_pll as fixed clock clk: imx: imx8mn: mark sys_pll1/2 as fixed clock clk: imx: imx8mm: mark sys_pll1/2 as fixed clock clk: imx8mn: Define gates for pll1/2 fixed dividers clk: imx8mm: Define gates for pll1/2 fixed dividers clk: imx8mq: Define gates for pll1/2 fixed dividers clk: imx: clk-pll14xx: Make two variables static clk: imx8mq: Add VIDEO2_PLL clock clk: imx8mn: Use common 1443X/1416X PLL clock structure clk: imx8mm: Move 1443X/1416X PLL clock structure to common place clk: imx: pll14xx: Fix quick switch of S/K parameter

drivers/clk: convert VL struct to struct_size

2019-11-08T16:36:12+00:00

There are a few manually-calculated variable-length struct allocations left, this converts them to use struct_size. Found with the following git grep command git grep -A1 'kzalloc.*sizeof[^_].*+' Signed-off-by: Stephen Kitt Link: https://lkml.kernel.org/r/20190927185110.29897-1-steve@sk2.org Acked-by: Gustavo A. R. Silva [sboyd@kernel.org: Add grep command] Signed-off-by: Stephen Boyd

clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path

2019-10-29T13:57:22+00:00

Add CLK_SET_RATE_PARENT flag to all clocks on the path from VPLL to G3D, so the G3D MALI driver can simply adjust the rate of its clock by doing a single clk_set_rate() call, without the need to know the whole clock topology in Exynos542x SoCs. Suggested-by: Marian Mihailescu Signed-off-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki

clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume

2019-10-29T10:31:36+00:00

Save and restore top PLL related configuration registers for big (APLL) and LITTLE (KPLL) cores during suspend/resume cycle. So far, CPU clocks were reset to default values after suspend/resume cycle and performance after system resume was affected when performance governor has been selected. Fixes: 773424326b51 ("clk: samsung: exynos5420: add more registers to restore list") Signed-off-by: Marian Mihailescu Signed-off-by: Sylwester Nawrocki

clk: samsung: exynos5420: Add VPLL rate table

2019-10-29T10:31:20+00:00

Add new table rate for VPLL for Exynos 542x SoC required to support Mali GPU clock frequencies. Signed-off-by: Marian Mihailescu Signed-off-by: Sylwester Nawrocki

clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume

2019-10-25T09:20:00+00:00

Properly save and restore all top PLL related configuration registers during suspend/resume cycle. So far driver only handled EPLL and RPLL clocks, all other were reset to default values after suspend/resume cycle. This caused for example lower G3D (MALI Panfrost) performance after system resume, even if performance governor has been selected. Reported-by: Reported-by: Marian Mihailescu Fixes: 773424326b51 ("clk: samsung: exynos5420: add more registers to restore list") Signed-off-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki

clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU

2019-10-23T16:26:21+00:00

G3D clocks require special handling of their parent bus clock during power domain on/off sequences. Those clocks were not initially added to the sub-CMU handler, because that time there was no open-source driver for the G3D (MALI Panfrost) hardware module and it was not possible to test it. This patch fixes this issue. Parent clock for G3D hardware block is now properly preserved during G3D power domain on/off sequence. This restores proper MALI Panfrost performance broken by commit 8686764fc071 ("ARM: dts: exynos: Add G3D power domain to Exynos542x"). Reported-by: Marian Mihailescu Fixes: b06a532bf1fa ("clk: samsung: Add Exynos5 sub-CMU clock driver") Signed-off-by: Marek Szyprowski Tested-by: Marian Mihailescu Acked-by: Krzysztof Kozlowski Signed-off-by: Sylwester Nawrocki

clk: samsung: exynos5433: Fix error paths

2019-10-23T16:23:28+00:00

Add checking the value returned by samsung_clk_alloc_reg_dump() and devm_kcalloc(). While fixing this, also release all gathered clocks. Fixes: 523d3de41f02 ("clk: samsung: exynos5433: Add support for runtime PM") Signed-off-by: Marek Szyprowski Reviewed-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi [s.nawrocki: squashed patch from K. Kozlowski adding missing slab.h header] Reported-by: kbuild test robot Signed-off-by: Krzysztof Kozlowski Signed-off-by: Sylwester Nawrocki