blackbird-op-linux/arch/powerpc/Kconfig, branch master

Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-02-04T13:06:46+00:00

Pull powerpc updates from Michael Ellerman: "A pretty small batch for us, and apologies for it being a bit late, I wanted to sneak Christophe's user_access_begin() series in. Summary: - Implement user_access_begin() and friends for our platforms that support controlling kernel access to userspace. - Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx. - Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual machines) to use the IOMMU. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and some other improvements. - A series to use the PCI hotplug framework to control opencapi card's so that they can be reset and re-read after flashing a new FPGA image. As well as other minor fixes and improvements as usual. Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain" * tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits) powerpc: configs: Cleanup old Kconfig options powerpc/configs/skiroot: Enable some more hardening options powerpc/configs/skiroot: Disable xmon default & enable reboot on panic powerpc/configs/skiroot: Enable security features powerpc/configs/skiroot: Update for symbol movement only powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV powerpc/configs/skiroot: Drop HID_LOGITECH powerpc/configs: Drop NET_VENDOR_HP which moved to staging powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE powerpc/configs: Drop CONFIG_QLGE which moved to staging powerpc: Do not consider weak unresolved symbol relocations as bad powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK powerpc: indent to improve Kconfig readability powerpc: Provide initial documentation for PAPR hcalls powerpc: Implement user_access_save() and user_access_restore() powerpc: Implement user_access_begin and friends powerpc/32s: Prepare prevent_user_access() for user_access_end() powerpc/32s: Drop NULL addr verification powerpc/kuap: Fix set direction in allow/prevent_user_access() powerpc/32s: Fix bad_kuap_fault() ...

asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE

2020-02-04T03:05:26+00:00

Towards a more consistent naming scheme. Link: http://lkml.kernel.org/r/20200116064531.483522-8-aneesh.kumar@linux.ibm.com Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Aneesh Kumar K.V Cc: Michael Ellerman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

asm-generic/tlb: rename HAVE_RCU_TABLE_FREE

2020-02-04T03:05:26+00:00

Towards a more consistent naming scheme. [akpm@linux-foundation.org: fix sparc64 Kconfig] Link: http://lkml.kernel.org/r/20200116064531.483522-7-aneesh.kumar@linux.ibm.com Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Aneesh Kumar K.V Cc: Michael Ellerman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush

2020-02-04T03:05:26+00:00

Architectures for which we have hardware walkers of Linux page table should flush TLB on mmu gather batch allocation failures and batch flush. Some architectures like POWER supports multiple translation modes (hash and radix) and in the case of POWER only radix translation mode needs the above TLBI. This is because for hash translation mode kernel wants to avoid this extra flush since there are no hardware walkers of linux page table. With radix translation, the hardware also walks linux page table and with that, kernel needs to make sure to TLB invalidate page walk cache before page table pages are freed. More details in commit d86564a2f085 ("mm/tlb, x86/mm: Support invalidating TLB caches for RCU_TABLE_FREE") The changes to sparc are to make sure we keep the old behavior since we are now removing HAVE_RCU_TABLE_NO_INVALIDATE. The default value for tlb_needs_table_invalidate is to always force an invalidate and sparc can avoid the table invalidate. Hence we define tlb_needs_table_invalidate to false for sparc architecture. Link: http://lkml.kernel.org/r/20200116064531.483522-3-aneesh.kumar@linux.ibm.com Fixes: a46cc7a90fd8 ("powerpc/mm/radix: Improve TLB/PWC flushes") Signed-off-by: Peter Zijlstra (Intel) Acked-by: Michael Ellerman [powerpc] Cc: [4.14+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case

2020-02-04T03:05:25+00:00

Patch series "Fixup page directory freeing", v4. This is a repost of patch series from Peter with the arch specific changes except ppc64 dropped. ppc64 changes are added here because we are redoing the patch series on top of ppc64 changes. This makes it easy to backport these changes. Only the first 2 patches need to be backported to stable. The thing is, on anything SMP, freeing page directories should observe the exact same order as normal page freeing: 1) unhook page/directory 2) TLB invalidate 3) free page/directory Without this, any concurrent page-table walk could end up with a Use-after-Free. This is esp. trivial for anything that has software page-table walkers (HAVE_FAST_GUP / software TLB fill) or the hardware caches partial page-walks (ie. caches page directories). Even on UP this might give issues since mmu_gather is preemptible these days. An interrupt or preempted task accessing user pages might stumble into the free page if the hardware caches page directories. This patch series fixes ppc64 and add generic MMU_GATHER changes to support the conversion of other architectures. I haven't added patches w.r.t other architecture because they are yet to be acked. This patch (of 9): A followup patch is going to make sure we correctly invalidate page walk cache before we free page table pages. In order to keep things simple enable RCU_TABLE_FREE even for !SMP so that we don't have to fixup the !SMP case differently in the followup patch !SMP case is right now broken for radix translation w.r.t page walk cache flush. We can get interrupted in between page table free and that would imply we have page walk cache entries pointing to tables which got freed already. Michael said "both our platforms that run on Power9 force SMP on in Kconfig, so the !SMP case is unlikely to be a problem for anyone in practice, unless they've hacked their kernel to build it !SMP." Link: http://lkml.kernel.org/r/20200116064531.483522-2-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V Acked-by: Peter Zijlstra (Intel) Acked-by: Michael Ellerman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2020-01-30T15:47:58+00:00

Pull devicetree updates from Rob Herring: - Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert) - Fix for DMA coherent devices on Power - Rework and simplify the DT phandle cache code - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART, STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC, STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010, DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks, Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI, Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM, Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI - New binding schemas for SATA and PATA controllers, TI and Infineon VR controllers, MAX31730 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt, renesas,etheravb-r8a77961 - Add USB 'super-speed-plus' as a documented speed - Vendor prefixes for broadmobi, calaosystems, kam, and mps - Clean-up the multiple flavors of ST-Ericsson vendor prefixes * tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits) scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles" of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc dt-bindings: leds: Convert gpio-leds to DT schema dt-bindings: leds: Convert common LED binding to schema dt-bindings: PCI: Convert generic host binding to DT schema dt-bindings: PCI: Convert Arm Versatile binding to DT schema dt-bindings: Be explicit about installing deps dt-bindings: stm32: convert dfsdm to json-schema dt-bindings: serial: Convert STM32 UART to json-schema dt-bindings: serial: Convert rs485 bindings to json-schema dt-bindings: timer: Use non-empty ranges in example dt-bindings: arm-boards: typo fix dt-bindings: Add TI and Infineon VR Controllers as trivial devices dt-binding: usb: add "super-speed-plus" dt-bindings: rcar-csi2: Convert bindings to json-schema dt-bindings: iio: adc: ad7606: Fix wrong maxItems value dt-bindings: Convert Faraday FTIDE010 to DT schema dt-bindings: Create DT bindings for PATA controllers dt-bindings: Create DT bindings for SATA controllers dt: bindings: add vendor prefix for Kamstrup A/S ...

powerpc: indent to improve Kconfig readability

2020-01-30T02:20:50+00:00

Indent a Kconfig continuation line to improve readability. Signed-off-by: Randy Dunlap Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/ff8729c1-3a4b-c720-48ba-a1a42b0ef892@infradead.org

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-01-28T18:07:09+00:00

Pull scheduler updates from Ingo Molnar: "These were the main changes in this cycle: - More -rt motivated separation of CONFIG_PREEMPT and CONFIG_PREEMPTION. - Add more low level scheduling topology sanity checks and warnings to filter out nonsensical topologies that break scheduling. - Extend uclamp constraints to influence wakeup CPU placement - Make the RT scheduler more aware of asymmetric topologies and CPU capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y - Make idle CPU selection more consistent - Various fixes, smaller cleanups, updates and enhancements - please see the git log for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) sched/fair: Define sched_idle_cpu() only for SMP configurations sched/topology: Assert non-NUMA topology masks don't (partially) overlap idle: fix spelling mistake "iterrupts" -> "interrupts" sched/fair: Remove redundant call to cpufreq_update_util() sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP sched/fair: calculate delta runnable load only when it's needed sched/cputime: move rq parameter in irqtime_account_process_tick stop_machine: Make stop_cpus() static sched/debug: Reset watchdog on all CPUs while processing sysrq-t sched/core: Fix size of rq::uclamp initialization sched/uclamp: Fix a bug in propagating uclamp value in new cgroups sched/fair: Load balance aggressively for SCHED_IDLE CPUs sched/fair : Improve update_sd_pick_busiest for spare capacity case watchdog: Remove soft_lockup_hrtimer_cnt and related code sched/rt: Make RT capacity-aware sched/fair: Make EAS wakeup placement consider uclamp restrictions sched/fair: Make task_fits_capacity() consider uclamp restrictions sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with() sched/uclamp: Make uclamp util helpers use and return UL values ...

Merge branch 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-01-28T16:38:25+00:00

Pull objtool updates from Ingo Molnar: "The main changes are to move the ORC unwind table sorting from early init to build-time - this speeds up booting. No change in functionality intended" * 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Fix !CONFIG_MODULES build warning x86/unwind/orc: Remove boot-time ORC unwind tables sorting scripts/sorttable: Implement build-time ORC unwind table sorting scripts/sorttable: Rename 'sortextable' to 'sorttable' scripts/sortextable: Refactor the do_func() function scripts/sortextable: Remove dead code scripts/sortextable: Clean up the code to meet the kernel coding style better scripts/sortextable: Rewrite error/success handling

of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc

2020-01-28T14:26:20+00:00

There's an OF helper called of_dma_is_coherent(), which checks if a device has a "dma-coherent" property to see if the device is coherent for DMA. But on some platforms devices are coherent by default, and on some platforms it's not possible to update existing device trees to add the "dma-coherent" property. So add a Kconfig symbol to allow arch code to tell of_dma_is_coherent() that devices are coherent by default, regardless of the presence of the property. Select that symbol on powerpc when NOT_COHERENT_CACHE is not set, ie. when the system has a coherent cache. Fixes: 92ea637edea3 ("of: introduce of_dma_is_coherent() helper") Cc: stable@vger.kernel.org # v3.16+ Reported-by: Christian Zigotzky Tested-by: Christian Zigotzky Signed-off-by: Michael Ellerman Reviewed-by: Ulf Hansson Signed-off-by: Rob Herring