blackbird-op-linux/arch/csky/abiv1, branch master

csky: Fixup 610 vipt cache flush mechanism

2019-08-22T02:44:24+00:00

610 has vipt aliasing issue, so we need to finish the cache flush apis mentioned in cachetlb.rst to avoid data corruption. Here is the list of modified apis in the patch: - flush_kernel_dcache_page (new add) - flush_dcache_mmap_lock (new add) - flush_dcache_mmap_unlock (new add) - flush_kernel_vmap_range (new add) - invalidate_kernel_vmap_range (new add) - flush_anon_page (new add) - flush_cache_range (new add) - flush_cache_vmap (flush all) - flush_cache_vunmap (flush all) - flush_cache_mm (only dcache flush) - flush_icache_page (just nop) - copy_from_user_page (remove no need flush) - copy_to_user_page (remove no need flush) Change to V2: - Fixup compile error with xa_lock*(&mapping->i_pages) Signed-off-by: Guo Ren Cc: Arnd Bergmann Cc: Christoph Hellwig

csky: Support kernel non-aligned access

2019-08-20T12:15:44+00:00

We prohibit non-aligned access in kernel mode, but some special NIC driver needs to support kernel-state unaligned access. For example, when the bus does not support unaligned access, IP header parsing will cause non-aligned access and driver does not recopy the skb buffer to dma for performance reasons. Added kernel_enable & user_enable to control unaligned access and added kernel_count & user_count for statistical unaligned access. Signed-off-by: Guo Ren Cc: Arnd Bergmann

csky: Fixup defer cache flush for 610

2019-08-20T12:09:14+00:00

We use defer cache flush mechanism to improve the performance of 610, but the implementation is wrong. We fix it up now and update the mechanism: - Zero page needn't be flushed. - If page is file mapping & non-touched in user space, defer flush. - If page is anon mapping or dirty file mapping, flush immediately. - In update_mmu_cache finish the defer flush by flush_dcache_page(). For 610 we need take care the dcache aliasing issue: - VIPT cache with 8K-bytes size per way in 4K page granularity. Signed-off-by: Guo Ren Cc: Arnd Bergmann

csky: Fixup arch_get_unmapped_area() implementation

2019-08-20T08:09:37+00:00

Current arch_get_unmapped_area() of abiv1 doesn't use standard kernel api. After referring to the implementation of arch/arm, we implement it with vm_unmapped_area() from linux/mm.h. Signed-off-by: Guo Ren Cc: Arnd Bergmann

Merge tag 'csky-for-linus-5.3-rc1' of git://github.com/c-sky/csky-linux

2019-07-19T19:15:33+00:00

Pull arch/csky pupdates from Guo Ren: "This round of csky subsystem gives two features (ASID algorithm update, Perf pmu record support) and some fixups. ASID updates: - Revert mmu ASID mechanism - Add new asid lib code from arm - Use generic asid algorithm to implement switch_mm - Improve tlb operation with help of asid Perf pmu record support: - Init pmu as a device - Add count-width property for csky pmu - Add pmu interrupt support - Fix perf record in kernel/user space - dt-bindings: Add csky PMU bindings Fixes: - Fixup no panic in kernel for some traps - Fixup some error count in 810 & 860. - Fixup abiv1 memset error" * tag 'csky-for-linus-5.3-rc1' of git://github.com/c-sky/csky-linux: csky: Fixup abiv1 memset error csky: Improve tlb operation with help of asid csky: Use generic asid algorithm to implement switch_mm csky: Add new asid lib code from arm csky: Revert mmu ASID mechanism dt-bindings: csky: Add csky PMU bindings dt-bindings: interrupt-controller: Update csky mpintc csky: Fixup some error count in 810 & 860. csky: Fix perf record in kernel/user space csky: Add pmu interrupt support csky: Add count-width property for csky pmu csky: Init pmu as a device csky: Fixup no panic in kernel for some traps csky: Select intc & timer drivers

csky: Fixup abiv1 memset error

2019-07-19T06:21:36+00:00

Current memset implementation in abiv1 is wrong and it'll cause unalign access. Just remove it and use the generic one. This patch will cause performance degradation and we will improve it with a new design in next patchset. Signed-off-by: Guo Ren Cc: Arnd Bergmann

csky: Use generic asid algorithm to implement switch_mm

2019-07-19T06:21:36+00:00

Use linux generic asid/vmid algorithm to implement csky switch_mm function. The algorithm is from arm and it could work with SMP system. It'll help reduce tlb flush for switch_mm in task/vm switch. Signed-off-by: Guo Ren Cc: Arnd Bergmann

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2019-07-09T04:48:15+00:00

Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...

signal: Remove the task parameter from force_sig_fault

2019-05-29T14:31:43+00:00

As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman"

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman