blackbird-op-linux/arch/arm/mach-pxa, branch master

Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2020-01-29T18:09:44+00:00

Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ...

usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors

2020-01-23T18:20:57+00:00

Instead of using the legacy GPIO API and keeping track on polarity inversion semantics in the driver, switch to use GPIO descriptors for this driver and change all consumers in the process. This makes it possible to retire platform data completely: the only remaining platform data member was "wakeup" which was intended to make the vbus interrupt wakeup capable, but was not set by any users and thus remained unused. VBUS was not waking any devices up. Leave a comment about it so later developers using the platform can consider setting it to always enabled so plugging in USB wakes up the platform. Cc: Daniel Mack Cc: Haojian Zhuang Acked-by: Robert Jarzmik Acked-by: Felipe Balbi Acked-by: Sylwester Nawrocki Acked-by: Philipp Zabel Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20200123155013.93249-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman

remove ioremap_nocache and devm_ioremap_nocache

2020-01-06T08:45:59+00:00

ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig Acked-by: Arnd Bergmann

Merge mainline/master into arm/fixes

2019-12-05T21:18:54+00:00

This brings in the mainline tree right after armsoc contents was merged this release cycle, so that we can re-run savedefconfig, etc. Signed-off-by: Olof Johansson

ARM: pxa: Fix resource properties

2019-12-05T18:12:05+00:00

The conversion to properties changed one assignment and missed three other assignments in the same file, fix it up so the platform compiles. The bug was reported by a few build bots but noone noticed. I noticed it when making other changes to the PXA platforms. Link: https://lore.kernel.org/r/20191203104117.85517-1-linus.walleij@linaro.org Cc: Andy Shevchenko Fixes: 50ec88120ea1 ("can: mcp251x: get rid of legacy platform data") Signed-off-by: Linus Walleij Reviewed-by: Andy Shevchenko Signed-off-by: Olof Johansson

Merge tag 'backlight-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

2019-12-02T00:13:39+00:00

Pull backlight updates from Lee Jones: "New Functionality: - Add support for an enable GPIO; lm3630a_bl - Add support for short circuit handling; qcom-wled - Add support for automatic string detection; qcom-wled Fix-ups: - Update Device Tree bindings; lm3630a-backlight, led-backlight, qcom-wled - Constify; ipaq_micro_bl - Optimise for CPU cycles; pwm_bl - Coding style fix-ups; pwm_bl - Trivial fix-ups (white space, comments, renaming); pwm_bl, gpio_backlight, qcom-wled - Kconfig dependency hacking; LCD_HP700 - Rename, refactor and add peripherals; pm8941-wled => qcom-wled - Make use of GPIO look-up tables; tosa_bl, tosa_lcd - Remove superfluous code; gpio_backlight - Adapt GPIO direction handling; gpio_backlight - Remove legacy use of platform data; gpio_backlight Bug Fixes: - Provide modules aliases; lm3630a_bl" * tag 'backlight-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits) backlight: qcom-wled: Fix spelling mistake "trigged" -> "triggered" backlight: gpio: Pull gpio_backlight_initial_power_state() into probe backlight: gpio: Use a helper variable for &pdev->dev backlight: gpio: Remove unused fields from platform data sh: ecovec24: don't set unused fields in platform data backlight: gpio: Simplify the platform data handling sh: ecovec24: add additional properties to the backlight device backlight: gpio: Explicitly set the direction of the GPIO backlight: gpio: Remove stray newline backlight: gpio: Remove unneeded include video: backlight: tosa: Use GPIO lookup table backlight: qcom-wled: Add auto string detection logic backlight: qcom-wled: Add support for short circuit handling backlight: qcom-wled: Add support for WLED4 peripheral backlight: qcom-wled: Restructure the driver for WLED3 backlight: qcom-wled: Rename PM8941* to WLED3 backlight: qcom-wled: Add new properties for PMI8998 backlight: qcom-wled: Restructure the qcom-wled bindings backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c dt-bindings: backlight: lm3630a: Fix missing include ...

can: mcp251x: get rid of legacy platform data

2019-11-11T20:57:28+00:00

Instead of using legacy platform data, switch to use device properties. For clock frequency we are using well established clock-frequency property. Users, two for now, are also converted here. Cc: Daniel Mack Cc: Haojian Zhuang Cc: Robert Jarzmik Cc: Russell King Signed-off-by: Andy Shevchenko Signed-off-by: Marc Kleine-Budde

video: backlight: tosa: Use GPIO lookup table

2019-11-11T09:29:56+00:00

The driver should not require a machine specific header. Change it to pass the GPIO line through a lookup table, and move the timing generator definitions into the drivers itself. Signed-off-by: Arnd Bergmann Acked-by: Robert Jarzmik Reviewed-by: Linus Walleij Reviewed-by: Daniel Thompson Signed-off-by: Lee Jones

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-07-20T00:05:08+00:00

Pull ARM SoC platform updates from Olof Johansson: "SoC platform changes. Main theme this merge window: - The Netx platform (Netx 100/500) platform is removed by Linus Walleij-- the SoC doesn't have active maintainers with hardware, and in discussions with the vendor the agreement was that it's OK to remove. - Russell King has a series of patches that cleans up and refactors SA1101 and RiscPC support" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) ARM: stm32: use "depends on" instead of "if" after prompt ARM: sa1100: convert to common clock framework ARM: exynos: Cleanup cppcheck shifting warning ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view ARM: exynos: Only build MCPM support if used arm: add missing include platform-data/atmel.h ARM: davinci: Use GPIO lookup table for DA850 LEDs ARM: OMAP2: drop explicit assembler architecture ARM: use arch_extension directive instead of arch argument ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB ARM: riscpc: enable chained scatterlist support ARM: riscpc: reduce IRQ handling code ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc ARM: riscpc: parse video information from tagged list ARM: riscpc: add ecard quirk for Atomwide 3port serial card MAINTAINERS: mvebu: Add git entry soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh ARM: OMAP2+: Make some variables static ...

Merge tag 'fbdev-v5.3' of git://github.com/bzolnier/linux

2019-07-09T16:55:45+00:00

Pull fbdev updates from Bartlomiej Zolnierkiewicz: - remove fbdev notifier usage for fbcon (as prep work to clean up the fbcon locking), add locking checks in vt/console code and make assorted cleanups in fbdev and backlight code (Daniel Vetter) - add COMPILE_TEST support to atmel_lcdfb, da8xx-fb, gbefb, imxfb, pvr2fb and pxa168fb drivers (me) - fix DMA API abuse in au1200fb and jz4740_fb drivers (Christoph Hellwig) - add check for new BGRT status field rotation bits in efifb driver (Hans de Goede) - mark expected switch fall-throughs in s3c-fb driver (Gustavo A. R. Silva) - remove fbdev mxsfb driver in favour of the drm version (Fabio Estevam) - remove broken rfbi code from omap2fb driver (me) - misc fixes (Arnd Bergmann, Shobhit Kukreti, Wei Yongjun, me) - misc cleanups (Gustavo A. R. Silva, Colin Ian King, me) * tag 'fbdev-v5.3' of git://github.com/bzolnier/linux: (62 commits) video: fbdev: imxfb: fix a typo in imxfb_probe() video: fbdev: s3c-fb: Mark expected switch fall-throughs video: fbdev: s3c-fb: fix sparse warnings about using incorrect types video: fbdev: don't print error message on framebuffer_alloc() failure video: fbdev: intelfb: return -ENOMEM on framebuffer_alloc() failure video: fbdev: s3c-fb: return -ENOMEM on framebuffer_alloc() failure vga_switcheroo: Depend upon fbcon being built-in, if enabled video: fbdev: omap2: remove rfbi video: fbdev: atmel_lcdfb: remove redundant initialization to variable ret video: fbdev-MMP: Use struct_size() in devm_kzalloc() video: fbdev: controlfb: fix warnings about comparing pointer to 0 efifb: BGRT: Add check for new BGRT status field rotation bits jz4740_fb: fix DMA API abuse video: fbdev: pvr2fb: fix link error for pvr2fb_pci_exit video: fbdev: s3c-fb: add COMPILE_TEST support video: fbdev: imxfb: fix sparse warnings about using incorrect types video: fbdev: pvr2fb: fix build warning when compiling as module fbcon: Export fbcon_update_vcs backlight: simplify lcd notifier staging/olpc_dcon: Add drm conversion to TODO ...