blackbird-op-linux/arch/arm/kernel, branch master

arm/patch: Fix !MMU compile

2020-02-11T11:56:27+00:00

Now that patch.o is unconditionally selected for ftrace, it can also get compiled for !MMU kernels. These (obviously) lack {set,clear}_fixmap() support. Also remove the superfluous __acquire/__release nonsense. Fixes: 42e51f187f86 ("arm/ftrace: Use __patch_text()") Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar

arm/ftrace: Fix BE text poking

2020-02-11T11:56:26+00:00

The __patch_text() function already applies __opcode_to_mem_*(), so when __opcode_to_mem_*() is not the identity (BE*), it is applied twice, wrecking the instruction. Fixes: 42e51f187f86 ("arm/ftrace: Use __patch_text()") Reported-by: Dmitry Osipenko Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Tested-by: Dmitry Osipenko

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2020-02-04T13:12:19+00:00

Pull ARM updates from Russell King: - decompressor updates - prevention of out-of-bounds access while stacktracing - fix a section mismatch warning with free_memmap() - make kexec depend on MMU to avoid some build errors - remove swapops stubs * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8954/1: NOMMU: remove stubs for swapops ARM: 8952/1: Disable kmemleak on XIP kernels ARM: 8951/1: Fix Kexec compilation issue. ARM: 8949/1: mm: mark free_memmap as __init ARM: 8948/1: Prevent OOB access in stacktrace ARM: 8945/1: decompressor: use CONFIG option instead of cc-option ARM: 8942/1: Revert "8857/1: efi: enable CP15 DMB instructions before cleaning the cache" ARM: 8941/1: decompressor: enable CP15 barrier instructions in v7 cache setup code

proc: convert everything to "struct proc_ops"

2020-02-04T03:05:26+00:00

The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2020-01-29T18:13:27+00:00

Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-01-28T18:07:09+00:00

Pull scheduler updates from Ingo Molnar: "These were the main changes in this cycle: - More -rt motivated separation of CONFIG_PREEMPT and CONFIG_PREEMPTION. - Add more low level scheduling topology sanity checks and warnings to filter out nonsensical topologies that break scheduling. - Extend uclamp constraints to influence wakeup CPU placement - Make the RT scheduler more aware of asymmetric topologies and CPU capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y - Make idle CPU selection more consistent - Various fixes, smaller cleanups, updates and enhancements - please see the git log for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) sched/fair: Define sched_idle_cpu() only for SMP configurations sched/topology: Assert non-NUMA topology masks don't (partially) overlap idle: fix spelling mistake "iterrupts" -> "interrupts" sched/fair: Remove redundant call to cpufreq_update_util() sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP sched/fair: calculate delta runnable load only when it's needed sched/cputime: move rq parameter in irqtime_account_process_tick stop_machine: Make stop_cpus() static sched/debug: Reset watchdog on all CPUs while processing sysrq-t sched/core: Fix size of rq::uclamp initialization sched/uclamp: Fix a bug in propagating uclamp value in new cgroups sched/fair: Load balance aggressively for SCHED_IDLE CPUs sched/fair : Improve update_sd_pick_busiest for spare capacity case watchdog: Remove soft_lockup_hrtimer_cnt and related code sched/rt: Make RT capacity-aware sched/fair: Make EAS wakeup placement consider uclamp restrictions sched/fair: Make task_fits_capacity() consider uclamp restrictions sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with() sched/uclamp: Make uclamp util helpers use and return UL values ...

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-01-28T17:44:15+00:00

Pull perf updates from Ingo Molnar: "Kernel side changes: - Ftrace is one of the last W^X violators (after this only KLP is left). These patches move it over to the generic text_poke() interface and thereby get rid of this oddity. This requires a surprising amount of surgery, by Peter Zijlstra. - x86/AMD PMUs: add support for 'Large Increment per Cycle Events' to count certain types of events that have a special, quirky hw ABI (by Kim Phillips) - kprobes fixes by Masami Hiramatsu Lots of tooling updates as well, the following subcommands were updated: annotate/report/top, c2c, clang, record, report/top TUI, sched timehist, tests; plus updates were done to the gtk ui, libperf, headers and the parser" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) perf/x86/amd: Add support for Large Increment per Cycle Events perf/x86/amd: Constrain Large Increment per Cycle events perf/x86/intel/rapl: Add Comet Lake support tracing: Initialize ret in syscall_enter_define_fields() perf header: Use last modification time for timestamp perf c2c: Fix return type for histogram sorting comparision functions perf beauty sockaddr: Fix augmented syscall format warning perf/ui/gtk: Fix gtk2 build perf ui gtk: Add missing zalloc object perf tools: Use %define api.pure full instead of %pure-parser libperf: Setup initial evlist::all_cpus value perf report: Fix no libunwind compiled warning break s390 issue perf tools: Support --prefix/--prefix-strip perf report: Clarify in help that --children is default tools build: Fix test-clang.cpp with Clang 8+ perf clang: Fix build with Clang 9 kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic tools lib: Fix builds when glibc contains strlcpy() perf report/top: Make 'e' visible in the help and make it toggle showing callchains perf report/top: Do not offer annotation for symbols without samples ...

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2020-01-25T22:32:51+00:00

Pull ARM fixes from Russell King: - fix ftrace relocation type filtering - relax arch timer version check * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8955/1: virt: Relax arch timer version check during early boot ARM: 8950/1: ftrace/recordmcount: filter relocation types

ARM: 8948/1: Prevent OOB access in stacktrace

2020-01-25T18:18:11+00:00

The stacktrace code can read beyond the stack size, when it attempts to read pt_regs from exception frames. This can happen on normal, non-corrupt stacks. Since the unwind information in the extable is not correct for function prologues, the unwinding code can return data from the stack which is not actually the caller function address, and if in_entry_text() happens to succeed on this value, we can end up reading data from outside the task's stack when attempting to read pt_regs, since there is no bounds check. Example: [<8010e729>] (unwind_backtrace) from [<8010a9c9>] (show_stack+0x11/0x14) [<8010a9c9>] (show_stack) from [<8057d8d7>] (dump_stack+0x87/0xac) [<8057d8d7>] (dump_stack) from [<8012271d>] (tasklet_action_common.constprop.4+0xa5/0xa8) [<8012271d>] (tasklet_action_common.constprop.4) from [<80102333>] (__do_softirq+0x11b/0x31c) [<80102333>] (__do_softirq) from [<80122485>] (irq_exit+0xad/0xd8) [<80122485>] (irq_exit) from [<8015f3d7>] (__handle_domain_irq+0x47/0x84) [<8015f3d7>] (__handle_domain_irq) from [<8036a523>] (gic_handle_irq+0x43/0x78) [<8036a523>] (gic_handle_irq) from [<80101a49>] (__irq_svc+0x69/0xb4) Exception stack(0xeb491f58 to 0xeb491fa0) 1f40: 7eb14794 00000000 1f60: ffffffff 008dd32c 008dd324 ffffffff 008dd314 0000002a 801011e4 eb490000 1f80: 0000002a 7eb1478c 50c5387d eb491fa8 80101001 8023d09c 40080033 ffffffff [<80101a49>] (__irq_svc) from [<8023d09c>] (do_pipe2+0x0/0xac) [<8023d09c>] (do_pipe2) from [] (0xffffffff) Exception stack(0xeb491fc8 to 0xeb492010) 1fc0: 008dd314 0000002a 00511ad8 008de4c8 7eb14790 7eb1478c 1fe0: 00511e34 7eb14774 004c8557 76f44098 60080030 7eb14794 00000000 00000000 2000: 00000001 00000000 ea846c00 ea847cc0 In this example, the stack limit is 0xeb492000, but 16 bytes outside the stack have been read. Fix it by adding bounds checks. Signed-off-by: Vincent Whitchurch Signed-off-by: Russell King

ARM: 8955/1: virt: Relax arch timer version check during early boot

2020-01-22T19:12:07+00:00

Updates to the Generic Timer architecture allow ID_PFR1.GenTimer to have values other than 0 or 1 while still preserving backward compatibility. At the moment, Linux is quite strict in the way it handles this field at early boot and will not configure arch timer if it doesn't find the value 1. Since here use ubfx for arch timer version extraction (hyb-stub build with -march=armv7-a, so it is safe) To help backports (even though the code was correct at the time of writing) Fixes: 8ec58be9f3ff ("ARM: virt: arch_timers: enable access to physical timers") Acked-by: Marc Zyngier Signed-off-by: Vladimir Murzin Signed-off-by: Russell King