blackbird-op-linux/Documentation/devicetree/bindings/iio/adc, branch master

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-02-08T21:58:44+00:00

Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...

dt-bindings: Fix paths in schema $id fields

2020-02-05T09:14:57+00:00

The $id path checks were inadequately checking the path part of the $id value. With the check fixed, there's a number of errors that need to be fixed. Most of the errors are including 'bindings/' in the path which should not be as that is considered the root. Cc: Andy Gross Cc: Bjorn Andersson Cc: Manivannan Sadhasivam Cc: Michael Turquette Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: "Nuno Sá" Cc: Jean Delvare Cc: Stefan Popa Cc: Jonathan Cameron Cc: Hartmut Knaack Cc: Lars-Peter Clausen Cc: Peter Meerwald-Stadler Cc: Marcus Folkesson Cc: Kent Gustavsson Cc: Dmitry Torokhov Cc: linux-clk@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Reviewed-by: Guenter Roeck Reviewed-by: Stephen Boyd Signed-off-by: Rob Herring

Merge tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2020-01-30T15:47:58+00:00

Pull devicetree updates from Rob Herring: - Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert) - Fix for DMA coherent devices on Power - Rework and simplify the DT phandle cache code - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART, STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC, STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010, DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks, Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI, Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM, Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI - New binding schemas for SATA and PATA controllers, TI and Infineon VR controllers, MAX31730 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt, renesas,etheravb-r8a77961 - Add USB 'super-speed-plus' as a documented speed - Vendor prefixes for broadmobi, calaosystems, kam, and mps - Clean-up the multiple flavors of ST-Ericsson vendor prefixes * tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits) scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles" of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc dt-bindings: leds: Convert gpio-leds to DT schema dt-bindings: leds: Convert common LED binding to schema dt-bindings: PCI: Convert generic host binding to DT schema dt-bindings: PCI: Convert Arm Versatile binding to DT schema dt-bindings: Be explicit about installing deps dt-bindings: stm32: convert dfsdm to json-schema dt-bindings: serial: Convert STM32 UART to json-schema dt-bindings: serial: Convert rs485 bindings to json-schema dt-bindings: timer: Use non-empty ranges in example dt-bindings: arm-boards: typo fix dt-bindings: Add TI and Infineon VR Controllers as trivial devices dt-binding: usb: add "super-speed-plus" dt-bindings: rcar-csi2: Convert bindings to json-schema dt-bindings: iio: adc: ad7606: Fix wrong maxItems value dt-bindings: Convert Faraday FTIDE010 to DT schema dt-bindings: Create DT bindings for PATA controllers dt-bindings: Create DT bindings for SATA controllers dt: bindings: add vendor prefix for Kamstrup A/S ...

dt-bindings: stm32: convert dfsdm to json-schema

2020-01-23T20:34:16+00:00

Convert the STM32 DFSDM bindings to DT schema format using json-schema. Signed-off-by: Olivier Moysan Signed-off-by: Rob Herring

Merge tag 'at91-5.6-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt

2020-01-20T06:48:12+00:00

AT91 DT for 5.6 #2 - Add sam9x60 dtsi - New board sam9x60 Evaluation Kit * tag 'at91-5.6-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60: add device tree for soc and board dt-bindings: arm: add sam9x60-ek board dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr dt-bindings: atmel-smc: add microchip,sam9x60-smc dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc dt-bindings: atmel-nand: add microchip,sam9x60-pmecc dt-bindings: atmel-matrix: add microchip,sam9x60-matrix dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc dt-bindings: atmel-isi: add microchip,sam9x60-isi dt-bindings: atmel-can: add microchip,sam9x60-can dt-bindings: at_xdmac: add microchip,sam9x60-dma dt-bindings: at_xdmac: remove wildcard Link: https://lore.kernel.org/r/20200119234707.GA90094@piout.net Signed-off-by: Olof Johansson

dt-bindings: iio: adc: ad7606: Fix wrong maxItems value

2020-01-14T17:55:12+00:00

This patch set the correct value for oversampling maxItems. In the original example, appears 3 items for oversampling while the maxItems is set to 1, this patch fixes those issues. Fixes: 416f882c3b40 ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml") Signed-off-by: Beniamin Bia Signed-off-by: Rob Herring

dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc

2020-01-14T14:06:56+00:00

Add microchip,sam9x60-adc to DT bindings documentation. Signed-off-by: Claudiu Beznea Acked-by: Jonathan Cameron Acked-by: Rob Herring Link: https://lore.kernel.org/r/1578673089-3484-7-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Alexandre Belloni

Merge tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2020-01-10T09:44:00+00:00

Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.6 cycle New device support * ad7091r5 ADC - New driver with follow up patch adding scale and vref support. - DT bindings * ad7923 - Support for ad7908, ad7918 and ad7928 added to driver. * bma180 - Support the BMA254 accelerometer. Required fairly substantial rework to allow for small differences between this an existing parts. * bma400 accelerometer - New driver with follow up patch for regulator support. - DT bindings. * asc dlhl60d - New driver support this range of pressure and temperature sensors. - DT bindings. * ltc2496 ADC - New driver to support this ADC. - Split the existing LTC2497 driver generic component out and reuse. - DT bindings. * parallax ping - New driver supporting ultrasonic and laser tof distance sensors. - Bindings for these sensors. New features * core - New char type for read_raw returns, used for thermocouple types. - Rename read_first_n callback to read. The reasons behind the original naming are lost to the mists of time. * ad799x - Allow pm_ops to disable device completely allowing regulator power down. * bma180 - Enable basic regulator support. * dmaengine buffer - Report platform data alignment requirements via new ABI. * max31856 - Add option to set mains filter rejection frequency and document new in_temp_filter_notch_center_frequency ABI. - Add support for configuring HW averaging (oversampling ratio) - Add runtime configuration of thermocouple type and document new ABI. * maxim-thermocouple - Add read only access to thermocouple type using new ABI, includes adding more specific compatibles to reflect which variant of the chip is being used. * mpu6050 - Provide option to support the PMU9150 in package magnetometer directly rather than via auxiliary bus. * stm32_adc - Add overrun interrupt checks to detect if this happens. * st_lsm6dsx - Enable the sensor-hub support for lsm6dsm. Includes various reworks to allow this. Cleanups and minor fixes * Subsystem wide - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5. - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them. * ad7266 - Convert to GPIO descriptors. * ad7303 - Avoid a dance with checking if the regulator is supplied by just using the optional request interface. * ad7887 - Simplify channel specification assignment to enable adding more devices. * ad7923 - Drop some unused and largely pointless defines of BOB_N==N variety. - Tidy up checkpatch warnings. - Add missing of_device_id table. * adf4350 - Convert to GPIO descriptors. * ak8975 - Convert to GPIO descriptors. * ADIS library and drivers - Expand scope of txrx_lock to cover all state and rename as state_lock - Add unlocked read / write to allow grouping of consecutive calls under single lock / unlock. - Add unlocked check_status, reset to allow grouping under single lock / unlock. - Remove remaining uses of core mlock for local state protection. mlock should never be used directly as it protects tightly defined core IIO device management state. * adis16240 - Enforce only supported SPI mode on driver load + add DT binding doc. * atlas-ph-sensor - Rename to atlas-sensor given it now covers things beyond ph sensors. * bma180 - Use local dev variable to tidy up code. - Use c99 style explicity .member assignment to make driver more readable. * bmp280 - Drop ACPI support. No evidence this was used and appropriate ID is not registered. - Allow ACPI to bind device via PRP0001 * dmaengine buffer - Use dma_request_chan instead of dma_request_slave_channel_reason as that ABI is going away. - Add module info to avoid tainting the kernel. * hts221 - Avoid magic number defines when only used to fill structure elements that are self describing. * lm3533 - Drop a stray semicolon. * max9611 - Cleanup enum handling to be more resilient to future changes. * mpu6050 - Delete MPU9150 from supported SPI devices as doesn't provide SPI. - Select I2C_MUX again after kbuild issue fixed elsewhere. * stm32-timer - Drop an unnecessary register update. * ssp_sensors - Convert to GPIO descriptors. * st_sensors - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used anyway. - Make default platform data structures __maybe_unsued. - Fill in some missing kernel-doc function parameters. * st_lsm6dsx - white space fixes. - Mark some constants that aren't always used as __maybe_unused. - Drop of ID table guards as they just pervent use under ACPI. - Switch to device properties to allow ACPI usage. * st_uvis25 - Drop acpi.h include as no ACPI APIs used. * ti-ads1015 - Drop legacy platform data as no one seems to be using it. - Use the device property API instead of OF specific. * ti-ads7950 - typo fix in error message. * tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits) iio: accel: bma180: BMA254 support iio: pressure: bmp280: Allow device to be enumerated from ACPI iio: pressure: bmp280: Drop ACPI support dt-bindings: iio: adc: convert sd modulator to json-schema iio: buffer: rename 'read_first_n' callback to 'read' iio: buffer-dmaengine: Report buffer length requirements bindings: iio: pressure: Add documentation for dlh driver dt-bindings: Add asc vendor iio: pressure: Add driver for DLH pressure sensors iio: buffer-dmaengine: Add module information iio: accel: bma180: Use explicit member assignment iio: accel: bma180: Basic regulator support iio: accel: bma180: Add dev helper variable iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page iio: imu: st_lsm6dsx: check if pull_up is located in primary page iio: imu: st_lsm6dsx: check if master_enable is located in primary page iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings iio: light: remove unneeded semicolon ...

dt-bindings: iio: adc: convert sd modulator to json-schema

2019-12-29T15:20:10+00:00

Convert the sigma delta modulator bindings to DT schema format using json-schema. Signed-off-by: Olivier Moysan Reviewed-by: Rob Herring Signed-off-by: Jonathan Cameron

iio: adc: ltc2496: provide device tree binding document

2019-12-15T12:15:19+00:00

The ADC only requires the standard stuff for spi devices and a reference voltage. Signed-off-by: Uwe Kleine-König Signed-off-by: Jonathan Cameron