blackbird-op-linux/Documentation/devicetree/bindings/arm/calxeda, branch master

dt-bindings: move Calxeda bindings to appropriate subsystems

2015-10-22T14:21:24+00:00

Move the Calxeda memory controller and PHY bindings to appropriate subsystem directories. Signed-off-by: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala

ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi

2013-11-04T23:01:05+00:00

The DDR controller is slightly different in ECX-2000 and ECX-1000, so we need to have different nodes for each platform. Signed-off-by: Rob Herring [Device Tree documentation updated.] Signed-off-by: Robert Richter

ata: add platform driver for Calxeda AHCI controller

2012-09-13T05:09:41+00:00

Calxeda highbank SATA phy has intermittent problems bringing up a link with Gen3 drives. Retrying the phy hard reset can work-around this issue, but each reset also disables spread spectrum support. The reset function also needs to reprogram the phy to enable spread spectrum support. Create a new driver based on ahci_platform to support the Calxeda Highbank SATA controller. Signed-off-by: Mark Langsdorf Signed-off-by: Rob Herring Signed-off-by: Jeff Garzik

edac: add support for Calxeda highbank L2 cache ecc

2012-06-27T12:01:29+00:00

Add support for L2 ECC on Calxeda highbank platform. Signed-off-by: Rob Herring Signed-off-by: Mauro Carvalho Chehab

edac: add support for Calxeda highbank memory controller

2012-06-27T12:00:57+00:00

Add support for memory controller on Calxeda Highbank platforms. Highbank platforms support a single 4GB mini-DIMM with 1-bit correction and 2-bit detection. Signed-off-by: Rob Herring Signed-off-by: Mauro Carvalho Chehab