Blackbird™ Linux sources for OpenPOWER https://git.raptorcs.com/git/blackbird-op-linux/atom?h=master 2020-02-05T17:44:14+00:00 2020-02-05T17:44:14+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-02-05T17:44:14+00:00 urn:sha1:d271ab29230b1d0ceb426f374c221c4eb2c91c64 Pull xen updates from Juergen Gross: - fix a bug introduced in 5.5 in the Xen gntdev driver - fix the Xen balloon driver when running on ancient Xen versions - allow Xen stubdoms to control interrupt enable flags of passed-through PCI cards - release resources in Xen backends under memory pressure * tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/blkback: Consistently insert one empty line between functions xen/blkback: Remove unnecessary static variable name prefixes xen/blkback: Squeeze page pools if a memory pressure is detected xenbus/backend: Protect xenbus callback with lock xenbus/backend: Add memory pressure handler callback xen/gntdev: Do not use mm notifiers with autotranslating guests xen/balloon: Support xend-based toolstack take two xen-pciback: optionally allow interrupt enable flag writes 2020-02-04T07:03:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-02-04T07:03:40+00:00 urn:sha1:eadc4e40e68832fc61ae5e3ef2ef5cfcd9308b2c Pull RTC updates from Alexandre Belloni: "The VL_READ and VL_CLR ioctls have been reworked to be more useful. This will not break userspace as there are very few users and they are using the integer value as a boolean. Apart from that, two drivers were reworked and a few fixes here and there for a net reduction of number of lines. Summary: Subsystem: - the VL_READ and VL_CLR ioctls are now documented and their behavior is unified across all the drivers. - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both REGMAP_I2C and REGMAP_SPI unecessarily. Drivers: - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and sama5d2 compatibles. - cmos: solve lost interrupts issue on MS Surface 3 - hym8563: return proper errno when time is invalid - rv3029: many fixes, nvram support" * tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits) dt-bindings: rtc: at91rm9200: document clocks property rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed rtc: Kconfig: select REGMAP_I2C when necessary rtc: Kconfig: properly indent sd3078 entry rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper rtc: cmos: Use predefined value for RTC IRQ on legacy x86 rtc: cmos: Stop using shared IRQ rtc: tps6586x: Use IRQ_NOAUTOEN flag rtc: at91rm9200: use FIELD_PREP/FIELD_GET rtc: at91rm9200: avoid time readout in at91_rtc_setalarm rtc: at91rm9200: move register definitions to C file rtc: at91rm9200: add sama5d4 and sama5d2 compatibles dt-bindings: rtc: at91rm9200: convert bindings to json-schema rtc: at91rm9200: remove procfs information dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc rtc: pcf8563: Use BIT rtc: moxart: Convert to SPDX identifier rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv rtc: rx8025: Remove struct i2c_client from struct rx8025_data rtc: hym8563: Read the valid flag directly instead of caching it ... 2020-01-30T23:39:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-01-30T23:39:24+00:00 urn:sha1:6e135baed8e70b00b88f7608f6b041461a5270bc Pull f2fs updates from Jaegeuk Kim: "In this series, we've implemented transparent compression experimentally. It supports LZO and LZ4, but will add more later as we investigate in the field more. At this point, the feature doesn't expose compressed space to user directly in order to guarantee potential data updates later to the space. Instead, the main goal is to reduce data writes to flash disk as much as possible, resulting in extending disk life time as well as relaxing IO congestion. Alternatively, we're also considering to add ioctl() to reclaim compressed space and show it to user after putting the immutable bit. Enhancements: - add compression support - avoid unnecessary locks in quota ops - harden power-cut scenario for zoned block devices - use private bio_set to avoid IO congestion - replace GC mutex with rwsem to serialize callers Bug fixes: - fix dentry consistency and memory corruption in rename()'s error case - fix wrong swap extent reports - fix casefolding bugs - change lock coverage to avoid deadlock - avoid GFP_KERNEL under f2fs_lock_op And, we've cleaned up sysfs entries to prepare no debugfs" * tag 'f2fs-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (31 commits) f2fs: fix race conditions in ->d_compare() and ->d_hash() f2fs: fix dcache lookup of !casefolded directories f2fs: Add f2fs stats to sysfs f2fs: delete duplicate information on sysfs nodes f2fs: change to use rwsem for gc_mutex f2fs: update f2fs document regarding to fsync_mode f2fs: add a way to turn off ipu bio cache f2fs: code cleanup for f2fs_statfs_project() f2fs: fix miscounted block limit in f2fs_statfs_project() f2fs: show the CP_PAUSE reason in checkpoint traces f2fs: fix deadlock allocating bio_post_read_ctx from mempool f2fs: remove unneeded check for error allocating bio_post_read_ctx f2fs: convert inline_dir early before starting rename f2fs: fix memleak of kobject f2fs: fix to add swap extent correctly f2fs: run fsck when getting bad inode during GC f2fs: support data compression f2fs: free sysfs kobject f2fs: declare nested quota_sem and remove unnecessary sems f2fs: don't put new_page twice in f2fs_rename ... 2020-01-30T15:51:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-01-30T15:51:24+00:00 urn:sha1:4cadc60d6bcfee9c626d4b55e9dc1475d21ad3bb Pull power supply and reset updates from Sebastian Reichel: "Core: - Add battery internal resistance temperature table support Drivers: - sc27xx: Optimize the battery resistance with measuring temperature - max17042-battery: Add MAX17055 support - bq25890-charger: Add support of BQ25892 and BQ25896 chips - misc fixes" * tag 'for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (44 commits) power: supply: ipaq_micro_battery: remove unneeded semicolon power: supply: bq25890_charger: fix incorrect error return when bq25890_field_read fails power: supply: axp20x_usb_power: Only poll while offline power: supply: axp20x_usb_power: Add wakeup control power: supply: axp20x_usb_power: Allow offlining power: supply: axp20x_usb_power: Use a match structure power: suppy: ucs1002: Make the symbol 'ucs1002_regulator_enable' static power: reset: at91-poweroff: use proper master clock register offset power: reset: at91-poweroff: introduce struct shdwc_reg_config power: supply: bq25890_charger: Add DT and I2C ids for all supported chips dt-bindings: Add new chips to bq25890 binding documentation power: supply: bq25890_charger: Add support of BQ25892 and BQ25896 chips power: supply: core: Update sysfs-class-power ABI document power: supply: sbs-battery: Fix a signedness bug in sbs_get_battery_capacity() power: supply: ltc2941-battery-gauge: fix use-after-free power: supply: max17040: Correct IRQ wake handling power: supply: axp20x_usb_power: Remove unused device_node power: supply: axp20x_ac_power: Add wakeup control power: supply: axp20x_ac_power: Allow offlining power: supply: axp20x_ac_power: Fix reporting online status ... 2020-01-29T18:15:11+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-01-29T18:15:11+00:00 urn:sha1:7ba31c3f2f1ee095d8126f4d3757fc3b2bc3c838 Pull staging and IIO updates from Greg KH: "Here is the big staging/iio driver patches for 5.6-rc1 Included in here are: - lots of new IIO drivers and updates for that subsystem - the usual huge quantity of minor cleanups for staging drivers - removal of the following staging drivers: - isdn/avm - isdn/gigaset - isdn/hysdn - octeon-usb - octeon ethernet Overall we deleted far more lines than we added, removing over 40k of old and obsolete driver code. All of these changes have been in linux-next for a while with no reported issues" * tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (353 commits) staging: most: usb: check for NULL device staging: next: configfs: fix release link staging: most: core: fix logging messages staging: most: core: remove container struct staging: most: remove struct device core driver staging: most: core: drop device reference staging: most: remove device from interface structure staging: comedi: drivers: fix spelling mistake "to" -> "too" staging: exfat: remove fs_func struct. staging: wilc1000: avoid mutex unlock without lock in wilc_wlan_handle_txq() staging: wilc1000: return zero on success and non-zero on function failure staging: axis-fifo: replace spinlock with mutex staging: wilc1000: remove unused code prior to throughput enhancement in SPI staging: wilc1000: added 'wilc_' prefix for 'struct assoc_resp' name staging: wilc1000: move firmware API struct's to separate header file staging: wilc1000: remove use of infinite loop conditions staging: kpc2000: rename variables with kpc namespace staging: vt6656: Remove memory buffer from vnt_download_firmware. staging: vt6656: Just check NEWRSR_DECRYPTOK for RX_FLAG_DECRYPTED. staging: vt6656: Use vnt_rx_tail struct for tail variables. ... 2020-01-29T18:09:44+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-01-29T18:09:44+00:00 urn:sha1:aac96626713fe167c672f9a008be0f514aa3e237 Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ... 2020-01-29T13:35:49+00:00 SeongJae Park sjpark@amazon.de 2020-01-27T08:18:10+00:00 urn:sha1:cb9369bdbb84440e9a8fded7eb2d0f94014f9a8f Each `blkif` has a free pages pool for the grant mapping. The size of the pool starts from zero and is increased on demand while processing the I/O requests. If current I/O requests handling is finished or 100 milliseconds has passed since last I/O requests handling, it checks and shrinks the pool to not exceed the size limit, `max_buffer_pages`. Therefore, host administrators can cause memory pressure in blkback by attaching a large number of block devices and inducing I/O. Such problematic situations can be avoided by limiting the maximum number of devices that can be attached, but finding the optimal limit is not so easy. Improper set of the limit can results in memory pressure or a resource underutilization. This commit avoids such problematic situations by squeezing the pools (returns every free page in the pool to the system) for a while (users can set this duration via a module parameter) if memory pressure is detected. Discussions =========== The `blkback`'s original shrinking mechanism returns only pages in the pool which are not currently be used by `blkback` to the system. In other words, the pages that are not mapped with granted pages. Because this commit is changing only the shrink limit but still uses the same freeing mechanism it does not touch pages which are currently mapping grants. Once memory pressure is detected, this commit keeps the squeezing limit for a user-specified time duration. The duration should be neither too long nor too short. If it is too long, the squeezing incurring overhead can reduce the I/O performance. If it is too short, `blkback` will not free enough pages to reduce the memory pressure. This commit sets the value as `10 milliseconds` by default because it is a short time in terms of I/O while it is a long time in terms of memory operations. Also, as the original shrinking mechanism works for at least every 100 milliseconds, this could be a somewhat reasonable choice. I also tested other durations (refer to the below section for more details) and confirmed that 10 milliseconds is the one that works best with the test. That said, the proper duration depends on actual configurations and workloads. That's why this commit allows users to set the duration as a module parameter. Memory Pressure Test ==================== To show how this commit fixes the memory pressure situation well, I configured a test environment on a xen-running virtualization system. On the `blkfront` running guest instances, I attach a large number of network-backed volume devices and induce I/O to those. Meanwhile, I measure the number of pages that swapped in (pswpin) and out (pswpout) on the `blkback` running guest. The test ran twice, once for the `blkback` before this commit and once for that after this commit. As shown below, this commit has dramatically reduced the memory pressure: pswpin pswpout before 76,672 185,799 after 867 3,967 Optimal Aggressive Shrinking Duration ------------------------------------- To find a best squeezing duration, I repeated the test with three different durations (1ms, 10ms, and 100ms). The results are as below: duration pswpin pswpout 1 707 5,095 10 867 3,967 100 362 3,348 As expected, the memory pressure decreases as the duration increases, but the reduction become slow from the `10ms`. Based on this results, I chose the default duration as 10ms. Performance Overhead Test ========================= This commit could incur I/O performance degradation under severe memory pressure because the squeezing will require more page allocations per I/O. To show the overhead, I artificially made a worst-case squeezing situation and measured the I/O performance of a `blkfront` running guest. For the artificial squeezing, I set the `blkback.max_buffer_pages` using the `/sys/module/xen_blkback/parameters/max_buffer_pages` file. In this test, I set the value to `1024` and `0`. The `1024` is the default value. Setting the value as `0` is same to a situation doing the squeezing always (worst-case). If the underlying block device is slow enough, the squeezing overhead could be hidden. For the reason, I use a fast block device, namely the rbd[1]: # xl block-attach guest phy:/dev/ram0 xvdb w For the I/O performance measurement, I run a simple `dd` command 5 times directly to the device as below and collect the 'MB/s' results. $ for i in {1..5}; do dd if=/dev/zero of=/dev/xvdb \ bs=4k count=$((256*512)); sync; done The results are as below. 'max_pgs' represents the value of the `blkback.max_buffer_pages` parameter. max_pgs Min Max Median Avg Stddev 0 417 423 420 419.4 2.5099801 1024 414 425 416 417.8 4.4384682 No difference proven at 95.0% confidence In short, even worst case squeezing on ramdisk based fast block device makes no visible performance degradation. Please note that this is just a very simple and minimal test. On systems using super-fast block devices and a special I/O workload, the results might be different. If you have any doubt, test on your machine with your workload to find the optimal squeezing duration for you. [1] https://www.kernel.org/doc/html/latest/admin-guide/blockdev/ramdisk.html Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> 2020-01-29T02:52:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-01-29T02:52:09+00:00 urn:sha1:73a0bff2058f2403c604371c325fec737ac2ac61 Pull IMA updates from Mimi Zohar: "Two new features - measuring certificates and querying IMA for a file hash - and three bug fixes: - Measuring certificates is like the rest of IMA, based on policy, but requires loading a custom policy. Certificates loaded onto a keyring, for example during early boot, before a custom policy has been loaded, are queued and only processed after loading the custom policy. - IMA calculates and caches files hashes. Other kernel subsystems, and possibly kernel modules, are interested in accessing these cached file hashes. The bug fixes prevent classifying a file short read (e.g. shutdown) as an invalid file signature, add a missing blank when displaying the securityfs policy rules containing LSM labels, and, lastly, fix the handling of the IMA policy information for unknown LSM labels" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: IMA: Defined delayed workqueue to free the queued keys IMA: Call workqueue functions to measure queued keys IMA: Define workqueue for early boot key measurements IMA: pre-allocate buffer to hold keyrings string ima: ima/lsm policy rule loading logic bug fixes ima: add the ability to query the cached hash of a given file ima: Add a space after printing LSM rules for readability IMA: fix measuring asymmetric keys Kconfig IMA: Read keyrings= option from the IMA policy IMA: Add support to limit measuring keys KEYS: Call the IMA hook to measure keys IMA: Define an IMA hook to measure keys IMA: Add KEY_CHECK func to measure keys IMA: Check IMA policy flag ima: avoid appraise error for hash calc interrupt 2020-01-29T00:02:33+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-01-29T00:02:33+00:00 urn:sha1:bd2463ac7d7ec51d432f23bf0e893fb371a908cd Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ... 2020-01-27T19:23:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-01-27T19:23:54+00:00 urn:sha1:6d277aca488fdf0a1e67cd14b5a58869f66197c9 Pull power management updates from Rafael Wysocki: "These add ACPI support to the intel_idle driver along with an admin guide document for it, add support for CPR (Core Power Reduction) to the AVS (Adaptive Voltage Scaling) subsystem, add new hardware support in a few places, add some new sysfs attributes, debugfs files and tracepoints, fix bugs and clean up a bunch of things all over. Specifics: - Update the ACPI processor driver in order to export acpi_processor_evaluate_cst() to the code outside of it, add ACPI support to the intel_idle driver based on that and clean up that driver somewhat (Rafael Wysocki). - Add an admin guide document for the intel_idle driver (Rafael Wysocki). - Clean up cpuidle core and drivers, enable compilation testing for some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael Wysocki, Yangtao Li). - Fix reference counting of OPP (operating performance points) table structures (Viresh Kumar). - Add support for CPR (Core Power Reduction) to the AVS (Adaptive Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King, YueHaibing). - Add support for TigerLake Mobile and JasperLake to the Intel RAPL power capping driver (Zhang Rui). - Update cpufreq drivers: - Add i.MX8MP support to imx-cpufreq-dt (Anson Huang). - Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva). - Fix cpufreq policy reference counting issues in s3c and brcmstb-avs (chenqiwu). - Fix ACPI table reference counting issue and HiSilicon quirk handling in the CPPC driver (Hanjun Guo). - Clean up spelling mistake in intel_pstate (Harry Pan). - Convert the kirkwood and tegra186 drivers to using devm_platform_ioremap_resource() (Yangtao Li). - Update devfreq core: - Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi). - Clean up the handing of transition statistics and allow them to be reset by writing 0 to the 'trans_stat' devfreq device attribute in sysfs (Kamil Konieczny). - Add 'devfreq_summary' to debugfs (Chanwoo Choi). - Clean up kerneldoc comments and Kconfig indentation (Krzysztof Kozlowski, Randy Dunlap). - Update devfreq drivers: - Add dynamic scaling for the imx8m DDR controller and clean up imx8m-ddrc (Leonard Crestez, YueHaibing). - Fix DT node reference counting and nitialization error code path in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency for it (Chanwoo Choi, Yangtao Li). - Fix DT node reference counting in rockchip-dfi and make it use devm_platform_ioremap_resource() (Yangtao Li). - Fix excessive stack usage in exynos-ppmu (Arnd Bergmann). - Fix initialization error code paths in exynos-bus (Yangtao Li). - Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof Kozlowski). - Add tracepoints for tracking usage_count updates unrelated to status changes in PM-runtime (Michał Mirosław). - Add sysfs attribute to control the "sync on suspend" behavior during system-wide suspend (Jonas Meurer). - Switch system-wide suspend tests over to 64-bit time (Alexandre Belloni). - Make wakeup sources statistics in debugfs cover deleted ones which used to be the case some time ago (zhuguangqing). - Clean up computations carried out during hibernation, update messages related to hibernation and fix a spelling mistake in one of them (Wen Yang, Luigi Semenzato, Colin Ian King). - Add mailmap entry for maintainer e-mail address that has not been functional for several years (Rafael Wysocki)" * tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits) cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG intel_idle: Clean up irtl_2_usec() intel_idle: Move 3 functions closer to their callers intel_idle: Annotate initialization code and data structures intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit() intel_idle: Rearrange intel_idle_cpuidle_driver_init() intel_idle: Clean up NULL pointer check in intel_idle_init() intel_idle: Fold intel_idle_probe() into intel_idle_init() intel_idle: Eliminate __setup_broadcast_timer() cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings cpuidle: sysfs: fix warnings when compiling with W=1 cpuidle: coupled: fix warnings when compiling with W=1 cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior PM / devfreq: Add debugfs support with devfreq_summary file Documentation: admin-guide: PM: Add intel_idle document cpuidle: arm: Enable compile testing for some of drivers PM-runtime: add tracepoints for usage_count changes cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether" PM: hibernate: fix spelling mistake "shapshot" -> "snapshot" ...