path: root/drivers/video/mvebu_lcd.c

/*
 * Video driver for Marvell Armada XP SoC
 *
 * Initialization of LCD interface and setup of SPLASH screen image
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <video_fb.h>
#include <linux/mbus.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>

#define MVEBU_LCD_WIN_CONTROL(w)        (MVEBU_LCD_BASE + 0xf000 + ((w) << 4))
#define MVEBU_LCD_WIN_BASE(w)           (MVEBU_LCD_BASE + 0xf004 + ((w) << 4))
#define MVEBU_LCD_WIN_REMAP(w)          (MVEBU_LCD_BASE + 0xf00c + ((w) << 4))

#define MVEBU_LCD_CFG_DMA_START_ADDR_0	(MVEBU_LCD_BASE + 0x00cc)
#define MVEBU_LCD_CFG_DMA_START_ADDR_1	(MVEBU_LCD_BASE + 0x00dc)

#define MVEBU_LCD_CFG_GRA_START_ADDR0	(MVEBU_LCD_BASE + 0x00f4)
#define MVEBU_LCD_CFG_GRA_START_ADDR1	(MVEBU_LCD_BASE + 0x00f8)
#define MVEBU_LCD_CFG_GRA_PITCH		(MVEBU_LCD_BASE + 0x00fc)
#define MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN	(MVEBU_LCD_BASE + 0x0100)
#define MVEBU_LCD_SPU_GRA_HPXL_VLN	(MVEBU_LCD_BASE + 0x0104)
#define MVEBU_LCD_SPU_GZM_HPXL_VLN	(MVEBU_LCD_BASE + 0x0108)
#define MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN	(MVEBU_LCD_BASE + 0x010c)
#define MVEBU_LCD_SPU_HWC_HPXL_VLN	(MVEBU_LCD_BASE + 0x0110)
#define MVEBU_LCD_SPUT_V_H_TOTAL	(MVEBU_LCD_BASE + 0x0114)
#define MVEBU_LCD_SPU_V_H_ACTIVE	(MVEBU_LCD_BASE + 0x0118)
#define MVEBU_LCD_SPU_H_PORCH		(MVEBU_LCD_BASE + 0x011c)
#define MVEBU_LCD_SPU_V_PORCH		(MVEBU_LCD_BASE + 0x0120)
#define MVEBU_LCD_SPU_BLANKCOLOR	(MVEBU_LCD_BASE + 0x0124)
#define MVEBU_LCD_SPU_ALPHA_COLOR1	(MVEBU_LCD_BASE + 0x0128)
#define MVEBU_LCD_SPU_ALPHA_COLOR2	(MVEBU_LCD_BASE + 0x012c)
#define MVEBU_LCD_SPU_COLORKEY_Y	(MVEBU_LCD_BASE + 0x0130)
#define MVEBU_LCD_SPU_COLORKEY_U	(MVEBU_LCD_BASE + 0x0134)
#define MVEBU_LCD_SPU_COLORKEY_V	(MVEBU_LCD_BASE + 0x0138)
#define MVEBU_LCD_CFG_RDREG4F		(MVEBU_LCD_BASE + 0x013c)
#define MVEBU_LCD_SPU_SPI_RXDATA	(MVEBU_LCD_BASE + 0x0140)
#define MVEBU_LCD_SPU_ISA_RXDATA	(MVEBU_LCD_BASE + 0x0144)
#define MVEBU_LCD_SPU_DBG_ISA		(MVEBU_LCD_BASE + 0x0148)

#define MVEBU_LCD_SPU_HWC_RDDAT		(MVEBU_LCD_BASE + 0x0158)
#define MVEBU_LCD_SPU_GAMMA_RDDAT	(MVEBU_LCD_BASE + 0x015c)
#define MVEBU_LCD_SPU_PALETTE_RDDAT	(MVEBU_LCD_BASE + 0x0160)
#define MVEBU_LCD_SPU_IOPAD_IN		(MVEBU_LCD_BASE + 0x0178)
#define MVEBU_LCD_FRAME_COUNT		(MVEBU_LCD_BASE + 0x017c)
#define MVEBU_LCD_SPU_DMA_CTRL0		(MVEBU_LCD_BASE + 0x0190)
#define MVEBU_LCD_SPU_DMA_CTRL1		(MVEBU_LCD_BASE + 0x0194)
#define MVEBU_LCD_SPU_SRAM_CTRL		(MVEBU_LCD_BASE + 0x0198)
#define MVEBU_LCD_SPU_SRAM_WRDAT	(MVEBU_LCD_BASE + 0x019c)
#define MVEBU_LCD_SPU_SRAM_PARA0	(MVEBU_LCD_BASE + 0x01a0)
#define MVEBU_LCD_SPU_SRAM_PARA1	(MVEBU_LCD_BASE + 0x01a4)
#define MVEBU_LCD_CFG_SCLK_DIV		(MVEBU_LCD_BASE + 0x01a8)
#define MVEBU_LCD_SPU_CONTRAST		(MVEBU_LCD_BASE + 0x01ac)
#define MVEBU_LCD_SPU_SATURATION	(MVEBU_LCD_BASE + 0x01b0)
#define MVEBU_LCD_SPU_CBSH_HUE		(MVEBU_LCD_BASE + 0x01b4)
#define MVEBU_LCD_SPU_DUMB_CTRL		(MVEBU_LCD_BASE + 0x01b8)
#define MVEBU_LCD_SPU_IOPAD_CONTROL	(MVEBU_LCD_BASE + 0x01bc)
#define MVEBU_LCD_SPU_IRQ_ENA_2		(MVEBU_LCD_BASE + 0x01d8)
#define MVEBU_LCD_SPU_IRQ_ISR_2		(MVEBU_LCD_BASE + 0x01dc)
#define MVEBU_LCD_SPU_IRQ_ENA		(MVEBU_LCD_BASE + 0x01c0)
#define MVEBU_LCD_SPU_IRQ_ISR		(MVEBU_LCD_BASE + 0x01c4)
#define MVEBU_LCD_ADLL_CTRL		(MVEBU_LCD_BASE + 0x01c8)
#define MVEBU_LCD_CLK_DIS		(MVEBU_LCD_BASE + 0x01cc)
#define MVEBU_LCD_VGA_HVSYNC_DELAY	(MVEBU_LCD_BASE + 0x01d4)
#define MVEBU_LCD_CLK_CFG_0		(MVEBU_LCD_BASE + 0xf0a0)
#define MVEBU_LCD_CLK_CFG_1		(MVEBU_LCD_BASE + 0xf0a4)
#define MVEBU_LCD_LVDS_CLK_CFG		(MVEBU_LCD_BASE + 0xf0ac)

#define MVEBU_LVDS_PADS_REG		(MVEBU_SYSTEM_REG_BASE + 0xf0)

/* Setup Mbus Bridge Windows for LCD */
static void mvebu_lcd_conf_mbus_registers(void)
{
	const struct mbus_dram_target_info *dram;
	int i;

	dram = mvebu_mbus_dram_info();

	/* Disable windows, set size/base/remap to 0  */
	for (i = 0; i < 6; i++) {
		writel(0, MVEBU_LCD_WIN_CONTROL(i));
		writel(0, MVEBU_LCD_WIN_BASE(i));
		writel(0, MVEBU_LCD_WIN_REMAP(i));
	}

	/* Write LCD bridge window registers */
	for (i = 0; i < dram->num_cs; i++) {
		const struct mbus_dram_window *cs = dram->cs + i;
		writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
		       (dram->mbus_dram_target_id << 4) | 1,
		       MVEBU_LCD_WIN_CONTROL(i));

		writel(cs->base & 0xffff0000, MVEBU_LCD_WIN_BASE(i));
	}
}

/* Initialize LCD registers */
int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
{
	/* Local variable for easier handling */
	int x = lcd_info->x_res;
	int y = lcd_info->y_res;
	u32 val;

	/* Setup Mbus Bridge Windows */
	mvebu_lcd_conf_mbus_registers();

	/*
	 * Set LVDS Pads Control Register
	 * wr 0 182F0 FFE00000
	 */
	clrbits_le32(MVEBU_LVDS_PADS_REG, 0x1f << 16);

	/*
	 * Set the LCD_CFG_GRA_START_ADDR0/1 Registers
	 * This is supposed to point to the "physical" memory at memory
	 * end (currently 1GB-64MB but also may be 2GB-64MB).
	 * See also the Window 0 settings!
	 */
	writel(lcd_info->fb_base, MVEBU_LCD_CFG_GRA_START_ADDR0);
	writel(lcd_info->fb_base, MVEBU_LCD_CFG_GRA_START_ADDR1);

	/*
	 * Set the LCD_CFG_GRA_PITCH Register
	 * Bits 31-28: Duty Cycle of Backlight. value/16=High (0x8=Mid Setting)
	 * Bits 25-16: Backlight divider from 32kHz Clock
	 *             (here 16=0x10 for 1kHz)
	 * Bits 15-00: Line Length in Bytes
	 *             240*2 (for RGB1555)=480=0x1E0
	 */
	writel(0x80100000 + 2 * x, MVEBU_LCD_CFG_GRA_PITCH);

	/*
	 * Set the LCD_SPU_GRA_OVSA_HPXL_VLN Register
	 * Bits 31-16: Vertical start of graphical overlay on screen
	 * Bits 15-00: Horizontal start of graphical overlay on screen
	 */
	writel(0x00000000, MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN);

	/*
	 * Set the LCD_SPU_GRA_HPXL_VLN Register
	 * Bits 31-16: Vertical size of graphical overlay 320=0x140
	 * Bits 15-00: Horizontal size of graphical overlay 240=0xF0
	 * Values before zooming
	 */
	writel((y << 16) | x, MVEBU_LCD_SPU_GRA_HPXL_VLN);

	/*
	 * Set the LCD_SPU_GZM_HPXL_VLN Register
	 * Bits 31-16: Vertical size of graphical overlay 320=0x140
	 * Bits 15-00: Horizontal size of graphical overlay 240=0xF0
	 * Values after zooming
	 */
	writel((y << 16) | x, MVEBU_LCD_SPU_GZM_HPXL_VLN);

	/*
	 * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
	 * Bits 31-16: Vertical position of HW Cursor 320=0x140
	 * Bits 15-00: Horizontal position of HW Cursor 240=0xF0
	 */
	writel((y << 16) | x, MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN);

	/*
	 * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
	 * Bits 31-16: Vertical size of HW Cursor
	 * Bits 15-00: Horizontal size of HW Cursor
	 */
	writel(0x00000000, MVEBU_LCD_SPU_HWC_HPXL_VLN);

	/*
	 * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
	 * Bits 31-16: Screen total vertical lines:
	 *             VSYNC                = 1
	 *             Vertical Front Porch = 2
	 *             Vertical Lines       = 320
	 *             Vertical Back Porch  = 2
	 *             SUM                  = 325 = 0x0145
	 * Bits 15-00: Screen total horizontal pixels:
	 *             HSYNC                  = 1
	 *             Horizontal Front Porch = 44
	 *             Horizontal Lines       = 240
	 *             Horizontal Back Porch  = 2
	 *             SUM                    = 287 = 0x011F
	 * Note: For the display the backporch is between SYNC and
	 *       the start of the pixels.
	 *       This is not certain for the Marvell (!?)
	 */
	val = ((y + lcd_info->y_fp + lcd_info->y_bp + 1) << 16) |
		(x + lcd_info->x_fp + lcd_info->x_bp + 1);
	writel(val, MVEBU_LCD_SPUT_V_H_TOTAL);

	/*
	 * Set the LCD_SPU_V_H_ACTIVE Register
	 * Bits 31-16: Screen active vertical lines 320=0x140
	 * Bits 15-00: Screen active horizontakl pixels 240=0x00F0
	 */
	writel((y << 16) | x, MVEBU_LCD_SPU_V_H_ACTIVE);

	/*
	 * Set the LCD_SPU_H_PORCH Register
	 * Bits 31-16: Screen horizontal backporch 44=0x2c
	 * Bits 15-00: Screen horizontal frontporch 2=0x02
	 * Note: The terms "front" and "back" for the Marvell seem to be
	 *       exactly opposite to the display.
	 */
	writel((lcd_info->x_fp << 16) | lcd_info->x_bp, MVEBU_LCD_SPU_H_PORCH);

	/*
	 * Set the LCD_SPU_V_PORCH Register
	 * Bits 31-16: Screen vertical backporch  2=0x02
	 * Bits 15-00: Screen vertical frontporch 2=0x02
	 * Note: The terms "front" and "back" for the Marvell seem to be exactly
	 *       opposite to the display.
	 */
	writel((lcd_info->y_fp << 16) | lcd_info->y_bp, MVEBU_LCD_SPU_V_PORCH);

	/*
	 * Set the LCD_SPU_BLANKCOLOR Register
	 * This should be black = 0
	 * For tests this is magenta=00FF00FF
	 */
	writel(0x00FF00FF, MVEBU_LCD_SPU_BLANKCOLOR);

	/*
	 * Registers in the range of 0x0128 to 0x012C are colors for the cursor
	 * Registers in the range of 0x0130 to 0x0138 are colors for video
	 * color keying
	 */

	/*
	 * Set the LCD_SPU_RDREG4F Register
	 * Bits 31-12: Reservd
	 * Bit     11: SRAM Wait
	 * Bit     10: Smart display fast TX (must be 1)
	 * Bit      9: DMA Arbitration Video/Graphics overlay: 0=interleaved
	 * Bit      8: FIFO watermark for DMA: 0=disable
	 * Bits 07-00: Empty 8B FIFO entries to trigger DMA, default=0x80
	 */
	writel(0x00000780, MVEBU_LCD_CFG_RDREG4F);

	/*
	 * Set the LCD_SPU_DMACTRL 0 Register
	 * Bit     31: Disable overlay blending 1=disable
	 * Bit     30: Gamma correction enable, 0=disable
	 * Bit     29: Video Contrast/Saturation/Hue Adjust enable, 0=disable
	 * Bit     28: Color palette enable, 0=disable
	 * Bit     27: DMA AXI Arbiter, 1=default
	 * Bit     26: HW Cursor 1-bit mode
	 * Bit     25: HW Cursor or 1- or 2-bit mode
	 * Bit     24: HW Cursor enabled, 0=disable
	 * Bits 23-20: Graphics Memory Color Format: 0x1=RGB1555
	 * Bits 19-16: Video Memory Color Format:    0x1=RGB1555
	 * Bit     15: Memory Toggle between frame 0 and 1: 0=disable
	 * Bit     14: Graphics horizontal scaling enable: 0=disable
	 * Bit     13: Graphics test mode: 0=disable
	 * Bit     12: Graphics SWAP R and B: 0=disable
	 * Bit     11: Graphics SWAP U and V: 0=disable
	 * Bit     10: Graphics SWAP Y and U/V: 0=disable
	 * Bit     09: Graphic YUV to RGB Conversion: 0=disable
	 * Bit     08: Graphic Transfer: 1=enable
	 * Bit     07: Memory Toggle: 0=disable
	 * Bit     06: Video horizontal scaling enable: 0=disable
	 * Bit     05: Video test mode: 0=disable
	 * Bit     04: Video SWAP R and B: 0=disable
	 * Bit     03: Video SWAP U and V: 0=disable
	 * Bit     02: Video SWAP Y and U/V: 0=disable
	 * Bit     01: Video YUV to RGB Conversion: 0=disable
	 * Bit     00: Video  Transfer: 0=disable
	 */
	writel(0x88111100, MVEBU_LCD_SPU_DMA_CTRL0);

	/*
	 * Set the LCD_SPU_DMA_CTRL1 Register
	 * Bit     31: Manual DMA Trigger = 0
	 * Bits 30-28: DMA Trigger Source: 0x2 VSYNC
	 * Bit     28: VSYNC_INV: 0=Rising Edge, 1=Falling Edge
	 * Bits 26-24: Color Key Mode: 0=disable
	 * Bit     23: Fill low bits: 0=fill with zeroes
	 * Bit     22: Reserved
	 * Bit     21: Gated Clock: 0=disable
	 * Bit     20: Power Save enable: 0=disable
	 * Bits 19-18: Reserved
	 * Bits 17-16: Configure Video/Graphic Path: 0x1: Graphic path alpha.
	 * Bits 15-08: Configure Alpha: 0x00.
	 * Bits 07-00: Reserved.
	 */
	writel(0x20010000, MVEBU_LCD_SPU_DMA_CTRL1);

	/*
	 * Set the LCD_SPU_SRAM_CTRL Register
	 * Reset to default = 0000C000
	 * Bits 15-14: SRAM control: init=0x3, Read=0, Write=2
	 * Bits 11-08: SRAM address ID: 0=gamma_yr, 1=gammy_ug, 2=gamma_vb,
	 *             3=palette, 15=cursor
	 */
	writel(0x0000C000, MVEBU_LCD_SPU_SRAM_CTRL);

	/*
	 * LCD_SPU_SRAM_WRDAT register: 019C
	 * LCD_SPU_SRAM_PARA0 register: 01A0
	 * LCD_SPU_SRAM_PARA1 register: 01A4 - Cursor control/Power settings
	 */
	writel(0x00000000, MVEBU_LCD_SPU_SRAM_PARA1);


	/* Clock settings in the at 01A8 and in the range F0A0 see below */

	/*
	 * Set LCD_SPU_CONTRAST
	 * Bits 31-16: Brightness sign ext. 8-bit value +255 to -255: default=0
	 * Bits 15-00: Contrast sign ext. 8-bit value +255 to -255: default=0
	 */
	writel(0x00000000, MVEBU_LCD_SPU_CONTRAST);

	/*
	 * Set LCD_SPU_SATURATION
	 * Bits 31-16: Multiplier signed 4.12 fixed point value
	 * Bits 15-00: Saturation signed 4.12 fixed point value
	 */
	writel(0x10001000, MVEBU_LCD_SPU_SATURATION);

	/*
	 * Set LCD_SPU_HUE
	 * Bits 31-16: Sine signed 2.14 fixed point value
	 * Bits 15-00: Cosine signed 2.14 fixed point value
	 */
	writel(0x00000000, MVEBU_LCD_SPU_CBSH_HUE);

	/*
	 * Set LCD_SPU_DUMB_CTRL
	 * Bits 31-28: LCD Type: 3=18 bit RGB | 6=24 bit RGB888
	 * Bits 27-12: Reserved
	 * Bit     11: LCD DMA Pipeline Enable: 1=Enable
	 * Bits 10-09: Reserved
	 * Bit      8: LCD GPIO pin (??)
	 * Bit      7: Reverse RGB
	 * Bit      6: Invert composite blank signal DE/EN (??)
	 * Bit      5: Invert composite sync signal
	 * Bit      4: Invert Pixel Valid Enable DE/EN (??)
	 * Bit      3: Invert VSYNC
	 * Bit      2: Invert HSYNC
	 * Bit      1: Invert Pixel Clock
	 * Bit      0: Enable LCD Panel: 1=Enable
	 * Question: Do we have to disable Smart and Dumb LCD
	 * and separately enable LVDS?
	 */
	writel(0x6000080F, MVEBU_LCD_SPU_DUMB_CTRL);

	/*
	 * Set LCD_SPU_IOPAD_CTRL
	 * Bits 31-20: Reserved
	 * Bits 19-18: Vertical Interpolation: 0=Disable
	 * Bits 17-16: Reserved
	 * Bit     15: Graphics Vertical Mirror enable: 0=disable
	 * Bit     14: Reserved
	 * Bit     13: Video Vertical Mirror enable: 0=disable
	 * Bit     12: Reserved
	 * Bit     11: Command Vertical Mirror enable: 0=disable
	 * Bit     10: Reserved
	 * Bits 09-08: YUV to RGB Color space conversion: 0 (Not used)
	 * Bits 07-04: AXI Bus Master: 0x4: no crossing of 4k boundary,
	 *             128 Bytes burst
	 * Bits 03-00: LCD pins: ??? 0=24-bit Dump panel ??
	 */
	writel(0x000000C0, MVEBU_LCD_SPU_IOPAD_CONTROL);

	/*
	 * Set SUP_IRQ_ENA_2: Disable all interrupts
	 */
	writel(0x00000000, MVEBU_LCD_SPU_IRQ_ENA_2);

	/*
	 * Set SUP_IRQ_ENA: Disable all interrupts.
	 */
	writel(0x00000000, MVEBU_LCD_SPU_IRQ_ENA);

	/*
	 * Set up ADDL Control Register
	 * Bits 31-29: 0x0 = Fastest Delay Line (default)
	 *             0x3 = Slowest Delay Line (default)
	 * Bit     28: Calibration done status.
	 * Bit     27: Reserved
	 * Bit     26: Set Pixel Clock to ADDL output
	 * Bit     25: Reduce CAL Enable
	 * Bits 24-22: Manual calibration value.
	 * Bit     21: Manual calibration enable.
	 * Bit     20: Restart Auto Cal
	 * Bits 19-16: Calibration Threshold voltage, default= 0x2
	 * Bite 15-14: Reserved
	 * Bits 13-11: Divisor for ADDL Clock: 0x1=/2, 0x3=/8, 0x5=/16
	 * Bit     10: Power Down ADDL module, default = 1!
	 * Bits 09-08: Test point configuration: 0x2=Bias, 0x3=High-z
	 * Bit     07: Reset ADDL
	 * Bit     06: Invert ADLL Clock
	 * Bits 05-00: Delay taps, 0x3F=Half Cycle, 0x00=No delay
	 * Note: ADLL is used for a VGA interface with DAC - not used here
	 */
	writel(0x00000000, MVEBU_LCD_ADLL_CTRL);

	/*
	 * Set the LCD_CLK_DIS Register:
	 * Bits 3 and 4 must be 1
	 */
	writel(0x00000018, MVEBU_LCD_CLK_DIS);

	/*
	 * Set the LCD_VGA_HSYNC/VSYNC Delay Register:
	 * Bits 03-00: Sets the delay for the HSYNC and VSYNC signals
	 */
	writel(0x00000000, MVEBU_LCD_VGA_HVSYNC_DELAY);

	/*
	 * Clock registers
	 * See page 475 in the functional spec.
	 */

	/* Step 1 and 2: Disable the PLL */

	/*
	 * Disable PLL, see "LCD Clock Configuration 1 Register" below
	 */
	writel(0x8FF40007, MVEBU_LCD_CLK_CFG_1);

	/*
	 * Powerdown, see "LCD Clock Configuration 0 Register" below
	 */
	writel(0x94000174, MVEBU_LCD_CLK_CFG_0);

	/*
	 * Set the LCD_CFG_SCLK_DIV Register
	 * This is set fix to 0x40000001 for the LVDS output:
	 * Bits 31-30: SCLCK Source: 0=AXIBus, 1=AHBus, 2=PLLDivider0
	 * Bits 15-01: Clock Divider: Bypass for LVDS=0x0001
	 * See page 475 in section 28.5.
	 */
	writel(0x80000001, MVEBU_LCD_CFG_SCLK_DIV);

	/*
	 * Set the LCD Clock Configuration 0 Register:
	 * Bit     31: Powerdown: 0=Power up
	 * Bits 30-29: Reserved
	 * Bits 28-26: PLL_KDIV: This encodes K
	 *             K=16 => 0x5
	 * Bits 25-17: PLL_MDIV: This is M-1:
	 *             M=1 => 0x0
	 * Bits 16-13: VCO band: 0x1 for 700-920MHz
	 * Bits 12-04: PLL_NDIV: This is N-1 and corresponds to R1_CTRL!
	 *             N=28=0x1C => 0x1B
	 * Bits 03-00: R1_CTRL (for N=28 => 0x4)
	 */
	writel(0x940021B4, MVEBU_LCD_CLK_CFG_0);

	/*
	 * Set the LCD Clock Configuration 1 Register:
	 * Bits 31-19: Reserved
	 * Bit     18: Select PLL: Core PLL, 1=Dedicated PPL
	 * Bit     17: Clock Output Enable: 0=disable, 1=enable
	 * Bit     16: Select RefClk: 0=RefClk (25MHz), 1=External
	 * Bit     15: Half-Div, Device Clock by DIV+0.5*Half-Dev
	 * Bits 14-13: Reserved
	 * Bits 12-00: PLL Full Divider [Note: Assumed to be the Post-Divider
	 *             M' for LVDS=7!]
	 */
	writel(0x8FF40007, MVEBU_LCD_CLK_CFG_1);

	/*
	 * Set the LVDS Clock Configuration Register:
	 * Bit     31: Clock Gating for the input clock to the LVDS
	 * Bit     30: LVDS Serializer enable: 1=Enabled
	 * Bits 29-11: Reserved
	 * Bit  11-08: LVDS Clock delay: 0x02 (default): by 2 pixel clock/7
	 * Bits 07-02: Reserved
	 * Bit     01: 24bbp Option: 0=Option_1,1=Option2
	 * Bit     00: 1=24bbp Panel: 0=18bpp Panel
	 * Note: Bits 0 and must be verified with the help of the
	 *       Interface/display
	 */
	writel(0xC0000201, MVEBU_LCD_LVDS_CLK_CFG);

	/*
	 * Power up PLL (Clock Config 0)
	 */
	writel(0x140021B4, MVEBU_LCD_CLK_CFG_0);

	/* wait 10 ms */
	mdelay(10);

	/*
	 * Enable PLL (Clock Config 1)
	 */
	writel(0x8FF60007, MVEBU_LCD_CLK_CFG_1);

	return 0;
}

int __weak board_video_init(void)
{
	return -1;
}

void *video_hw_init(void)
{
	static GraphicDevice mvebufb;
	GraphicDevice *pGD = &mvebufb;
	u32 val;

	/*
	 * The board code needs to call mvebu_lcd_register_init()
	 * in its board_video_init() implementation, with the board
	 * specific parameters for its LCD.
	 */
	if (board_video_init() || !readl(MVEBU_LCD_CFG_GRA_START_ADDR0))
		return NULL;

	/* Provide the necessary values for the U-Boot video IF */
	val = readl(MVEBU_LCD_SPU_V_H_ACTIVE);
	pGD->winSizeY = val >> 16;
	pGD->winSizeX = val & 0x0000ffff;
	pGD->gdfBytesPP = 2;
	pGD->gdfIndex = GDF_15BIT_555RGB;
	pGD->frameAdrs = readl(MVEBU_LCD_CFG_GRA_START_ADDR0);

	debug("LCD: buffer at 0x%08x resolution %dx%d\n", pGD->frameAdrs,
	      pGD->winSizeX, pGD->winSizeY);

	return pGD;
}