summaryrefslogtreecommitdiffstats
path: root/board/sandburst/common/ppc440gx_i2c.c
blob: 9af6b8d881575081a930b763c1014285e0b1067d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
/*
 *  Copyright (C) 2005 Sandburst Corporation
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * Ported from cpu/ppc4xx/i2c.c by AS HARNOIS by
 * Travis B. Sawyer
 * Sandburst Corporation.
 */
#include <common.h>
#include <ppc4xx.h>
#include <4xx_i2c.h>
#include <i2c.h>
#include <command.h>
#include "ppc440gx_i2c.h"

#ifdef CONFIG_I2C_BUS1

#define IIC_OK		0
#define IIC_NOK		1
#define IIC_NOK_LA	2		/* Lost arbitration */
#define IIC_NOK_ICT	3		/* Incomplete transfer */
#define IIC_NOK_XFRA	4		/* Transfer aborted */
#define IIC_NOK_DATA	5		/* No data in buffer */
#define IIC_NOK_TOUT	6		/* Transfer timeout */

#define IIC_TIMEOUT 1			/* 1 second */
#if defined(CONFIG_SYS_I2C_NOPROBES)
static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
#endif

static void _i2c_bus1_reset (void)
{
	int i, status;

	/* Reset status register */
	/* write 1 in SCMP and IRQA to clear these fields */
	out8 (IIC_STS1, 0x0A);

	/* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */
	out8 (IIC_EXTSTS1, 0x8F);
	__asm__ volatile ("eieio");

	/*
	 * Get current state, reset bus
	 * only if no transfers are pending.
	 */
	i = 10;
	do {
		/* Get status */
		status = in8 (IIC_STS1);
		udelay (500);			/* 500us */
		i--;
	} while ((status & IIC_STS_PT) && (i > 0));
	/* Soft reset controller */
	status = in8 (IIC_XTCNTLSS1);
	out8 (IIC_XTCNTLSS1, (status | IIC_XTCNTLSS_SRST));
	__asm__ volatile ("eieio");

	/* make sure where in initial state, data hi, clock hi */
	out8 (IIC_DIRECTCNTL1, 0xC);
	for (i = 0; i < 10; i++) {
		if ((in8 (IIC_DIRECTCNTL1) & 0x3) != 0x3) {
			/* clock until we get to known state */
			out8 (IIC_DIRECTCNTL1, 0x8);	/* clock lo */
			udelay (100);		/* 100us */
			out8 (IIC_DIRECTCNTL1, 0xC);	/* clock hi */
			udelay (100);		/* 100us */
		} else {
			break;
		}
	}
	/* send start condition */
	out8 (IIC_DIRECTCNTL1, 0x4);
	udelay (1000);				/* 1ms */
	/* send stop condition */
	out8 (IIC_DIRECTCNTL1, 0xC);
	udelay (1000);				/* 1ms */
	/* Unreset controller */
	out8 (IIC_XTCNTLSS1, (status & ~IIC_XTCNTLSS_SRST));
	udelay (1000);				/* 1ms */
}

void i2c1_init (int speed, int slaveadd)
{
	sys_info_t sysInfo;
	unsigned long freqOPB;
	int val, divisor;

#ifdef CONFIG_SYS_I2C_INIT_BOARD
	/* call board specific i2c bus reset routine before accessing the   */
	/* environment, which might be in a chip on that bus. For details   */
	/* about this problem see doc/I2C_Edge_Conditions.                  */
	i2c_init_board();
#endif

	/* Handle possible failed I2C state */
	/* FIXME: put this into i2c_init_board()? */
	_i2c_bus1_reset ();

	/* clear lo master address */
	out8 (IIC_LMADR1, 0);

	/* clear hi master address */
	out8 (IIC_HMADR1, 0);

	/* clear lo slave address */
	out8 (IIC_LSADR1, 0);

	/* clear hi slave address */
	out8 (IIC_HSADR1, 0);

	/* Clock divide Register */
	/* get OPB frequency */
	get_sys_info (&sysInfo);
	freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv;
	/* set divisor according to freqOPB */
	divisor = (freqOPB - 1) / 10000000;
	if (divisor == 0)
		divisor = 1;
	out8 (IIC_CLKDIV1, divisor);

	/* no interrupts */
	out8 (IIC_INTRMSK1, 0);

	/* clear transfer count */
	out8 (IIC_XFRCNT1, 0);

	/* clear extended control & stat */
	/* write 1 in SRC SRS SWC SWS to clear these fields */
	out8 (IIC_XTCNTLSS1, 0xF0);

	/* Mode Control Register
	   Flush Slave/Master data buffer */
	out8 (IIC_MDCNTL1, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
	__asm__ volatile ("eieio");


	val = in8(IIC_MDCNTL1);
	__asm__ volatile ("eieio");

	/* Ignore General Call, slave transfers are ignored,
	   disable interrupts, exit unknown bus state, enable hold
	   SCL
	   100kHz normaly or FastMode for 400kHz and above
	*/

	val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL;
	if( speed >= 400000 ){
		val |= IIC_MDCNTL_FSM;
	}
	out8 (IIC_MDCNTL1, val);

	/* clear control reg */
	out8 (IIC_CNTL1, 0x00);
	__asm__ volatile ("eieio");

}

/*
  This code tries to use the features of the 405GP i2c
  controller. It will transfer up to 4 bytes in one pass
  on the loop. It only does out8(lbz) to the buffer when it
  is possible to do out16(lhz) transfers.

  cmd_type is 0 for write 1 for read.

  addr_len can take any value from 0-255, it is only limited
  by the char, we could make it larger if needed. If it is
  0 we skip the address write cycle.

  Typical case is a Write of an addr followd by a Read. The
  IBM FAQ does not cover this. On the last byte of the write
  we don't set the creg CHT bit, and on the first bytes of the
  read we set the RPST bit.

  It does not support address only transfers, there must be
  a data part. If you want to write the address yourself, put
  it in the data pointer.

  It does not support transfer to/from address 0.

  It does not check XFRCNT.
*/
static
int i2c_transfer1(unsigned char cmd_type,
		  unsigned char chip,
		  unsigned char addr[],
		  unsigned char addr_len,
		  unsigned char data[],
		  unsigned short data_len )
{
	unsigned char* ptr;
	int reading;
	int tran,cnt;
	int result;
	int status;
	int i;
	uchar creg;

	if( data == 0 || data_len == 0 ){
		/*Don't support data transfer of no length or to address 0*/
		printf( "i2c_transfer: bad call\n" );
		return IIC_NOK;
	}
	if( addr && addr_len ){
		ptr = addr;
		cnt = addr_len;
		reading = 0;
	}else{
		ptr = data;
		cnt = data_len;
		reading = cmd_type;
	}

	/*Clear Stop Complete Bit*/
	out8(IIC_STS1,IIC_STS_SCMP);
	/* Check init */
	i=10;
	do {
		/* Get status */
		status = in8(IIC_STS1);
		__asm__ volatile("eieio");
		i--;
	} while ((status & IIC_STS_PT) && (i>0));

	if (status & IIC_STS_PT) {
		result = IIC_NOK_TOUT;
		return(result);
	}
	/*flush the Master/Slave Databuffers*/
	out8(IIC_MDCNTL1, ((in8(IIC_MDCNTL1))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB));
	/*need to wait 4 OPB clocks? code below should take that long*/

	/* 7-bit adressing */
	out8(IIC_HMADR1,0);
	out8(IIC_LMADR1, chip);
	__asm__ volatile("eieio");

	tran = 0;
	result = IIC_OK;
	creg = 0;

	while ( tran != cnt && (result == IIC_OK)) {
		int  bc,j;

		/* Control register =
		   Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start,
		   Transfer is a sequence of transfers
		*/
		creg |= IIC_CNTL_PT;

		bc = (cnt - tran) > 4 ? 4 :
			cnt - tran;
		creg |= (bc-1)<<4;
		/* if the real cmd type is write continue trans*/
		if ( (!cmd_type && (ptr == addr)) || ((tran+bc) != cnt) )
			creg |= IIC_CNTL_CHT;

		if (reading)
			creg |= IIC_CNTL_READ;
		else {
			for(j=0; j<bc; j++) {
				/* Set buffer */
				out8(IIC_MDBUF1,ptr[tran+j]);
				__asm__ volatile("eieio");
			}
		}
		out8(IIC_CNTL1, creg );
		__asm__ volatile("eieio");

		/* Transfer is in progress
		   we have to wait for upto 5 bytes of data
		   1 byte chip address+r/w bit then bc bytes
		   of data.
		   udelay(10) is 1 bit time at 100khz
		   Doubled for slop. 20 is too small.
		*/
		i=2*5*8;
		do {
			/* Get status */
			status = in8(IIC_STS1);
			__asm__ volatile("eieio");
			udelay (10);
			i--;
		} while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR)
			 && (i>0));

		if (status & IIC_STS_ERR) {
			result = IIC_NOK;
			status = in8 (IIC_EXTSTS1);
			/* Lost arbitration? */
			if (status & IIC_EXTSTS_LA)
				result = IIC_NOK_LA;
			/* Incomplete transfer? */
			if (status & IIC_EXTSTS_ICT)
				result = IIC_NOK_ICT;
			/* Transfer aborted? */
			if (status & IIC_EXTSTS_XFRA)
				result = IIC_NOK_XFRA;
		} else if ( status & IIC_STS_PT) {
			result = IIC_NOK_TOUT;
		}
		/* Command is reading => get buffer */
		if ((reading) && (result == IIC_OK)) {
			/* Are there data in buffer */
			if (status & IIC_STS_MDBS) {
				/*
				  even if we have data we have to wait 4OPB clocks
				  for it to hit the front of the FIFO, after that
				  we can just read. We should check XFCNT here and
				  if the FIFO is full there is no need to wait.
				*/
				udelay (1);
				for(j=0;j<bc;j++) {
					ptr[tran+j] = in8(IIC_MDBUF1);
					__asm__ volatile("eieio");
				}
			} else
				result = IIC_NOK_DATA;
		}
		creg = 0;
		tran+=bc;
		if( ptr == addr && tran == cnt ) {
			ptr = data;
			cnt = data_len;
			tran = 0;
			reading = cmd_type;
			if( reading )
				creg = IIC_CNTL_RPST;
		}
	}
	return (result);
}

int i2c_probe1 (uchar chip)
{
	uchar buf[1];

	buf[0] = 0;

	/*
	 * What is needed is to send the chip address and verify that the
	 * address was <ACK>ed (i.e. there was a chip at that address which
	 * drove the data line low).
	 */
	return(i2c_transfer1 (1, chip << 1, 0,0, buf, 1) != 0);
}


int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
{
	uchar xaddr[4];
	int ret;

	if ( alen > 4 ) {
		printf ("I2C read: addr len %d not supported\n", alen);
		return 1;
	}

	if ( alen > 0 ) {
		xaddr[0] = (addr >> 24) & 0xFF;
		xaddr[1] = (addr >> 16) & 0xFF;
		xaddr[2] = (addr >> 8) & 0xFF;
		xaddr[3] = addr & 0xFF;
	}


#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
	/*
	 * EEPROM chips that implement "address overflow" are ones
	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
	 * address and the extra bits end up in the "chip address"
	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
	 * four 256 byte chips.
	 *
	 * Note that we consider the length of the address field to
	 * still be one byte because the extra address bits are
	 * hidden in the chip address.
	 */
	if( alen > 0 )
		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif
	if( (ret = i2c_transfer1( 1, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
		printf( "I2c read: failed %d\n", ret);
		return 1;
	}
	return 0;
}

int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
{
	uchar xaddr[4];

	if ( alen > 4 ) {
		printf ("I2C write: addr len %d not supported\n", alen);
		return 1;

	}
	if ( alen > 0 ) {
		xaddr[0] = (addr >> 24) & 0xFF;
		xaddr[1] = (addr >> 16) & 0xFF;
		xaddr[2] = (addr >> 8) & 0xFF;
		xaddr[3] = addr & 0xFF;
	}

#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
	/*
	 * EEPROM chips that implement "address overflow" are ones
	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
	 * address and the extra bits end up in the "chip address"
	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
	 * four 256 byte chips.
	 *
	 * Note that we consider the length of the address field to
	 * still be one byte because the extra address bits are
	 * hidden in the chip address.
	 */
	if( alen > 0 )
		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif

	return (i2c_transfer1( 0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
}

/*-----------------------------------------------------------------------
 * Read a register
 */
uchar i2c_reg_read1(uchar i2c_addr, uchar reg)
{
	uchar buf;

	i2c_read1(i2c_addr, reg, 1, &buf, (uchar)1);

	return(buf);
}

/*-----------------------------------------------------------------------
 * Write a register
 */
void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val)
{
	i2c_write1(i2c_addr, reg, 1, &val, 1);
}


int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
	int j;
#if defined(CONFIG_SYS_I2C_NOPROBES)
	int k, skip;
#endif

	puts ("Valid chip addresses:");
	for(j = 0; j < 128; j++) {
#if defined(CONFIG_SYS_I2C_NOPROBES)
		skip = 0;
		for (k = 0; k < sizeof(i2c_no_probes); k++){
			if (j == i2c_no_probes[k]){
				skip = 1;
				break;
			}
		}
		if (skip)
			continue;
#endif
		if(i2c_probe1(j) == 0) {
			printf(" %02X", j);
		}
	}
	putc ('\n');

#if defined(CONFIG_SYS_I2C_NOPROBES)
	puts ("Excluded chip addresses:");
	for( k = 0; k < sizeof(i2c_no_probes); k++ )
		printf(" %02X", i2c_no_probes[k] );
	putc ('\n');
#endif

	return 0;
}

U_BOOT_CMD(
	iprobe1,	1,	1,	do_i2c1_probe,
	"iprobe1  - probe to discover valid I2C chip addresses\n",
	"\n    -discover valid I2C chip addresses\n"
);

#endif	/* CONFIG_I2C_BUS1 */
OpenPOWER on IntegriCloud