summaryrefslogtreecommitdiffstats
path: root/board/samsung/smdk6400/lowlevel_init.S
blob: 30d88780d08a9338f181bbfff5ae3e2752538bf6 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
/*
 * Memory Setup stuff - taken from blob memsetup.S
 *
 * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
 *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
 *
 * Modified for the Samsung SMDK2410 by
 * (C) Copyright 2002
 * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
 *
 * (C) Copyright 2008
 * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */


#include <config.h>
#include <version.h>

#include <asm/arch/s3c6400.h>

#ifdef CONFIG_SERIAL1
#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET)
#elif defined(CONFIG_SERIAL2)
#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART1_OFFSET)
#else
#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART2_OFFSET)
#endif

_TEXT_BASE:
	.word	TEXT_BASE

	.globl lowlevel_init
lowlevel_init:
	mov	r12, lr

	/* LED on only #8 */
	ldr	r0, =ELFIN_GPIO_BASE
	ldr	r1, =0x55540000
	str	r1, [r0, #GPNCON_OFFSET]

	ldr	r1, =0x55555555
	str	r1, [r0, #GPNPUD_OFFSET]

	ldr	r1, =0xf000
	str	r1, [r0, #GPNDAT_OFFSET]

	/* Disable Watchdog */
	ldr	r0, =0x7e000000		@0x7e004000
	orr	r0, r0, #0x4000
	mov	r1, #0
	str	r1, [r0]

	/* External interrupt pending clear */
	ldr	r0, =(ELFIN_GPIO_BASE+EINTPEND_OFFSET)	/*EINTPEND*/
	ldr	r1, [r0]
	str	r1, [r0]

	ldr	r0, =ELFIN_VIC0_BASE_ADDR	@0x71200000
	ldr	r1, =ELFIN_VIC1_BASE_ADDR	@0x71300000

	/* Disable all interrupts (VIC0 and VIC1) */
	mvn	r3, #0x0
	str	r3, [r0, #oINTMSK]
	str	r3, [r1, #oINTMSK]

	/* Set all interrupts as IRQ */
	mov	r3, #0x0
	str	r3, [r0, #oINTMOD]
	str	r3, [r1, #oINTMOD]

	/* Pending Interrupt Clear */
	mov	r3, #0x0
	str	r3, [r0, #oVECTADDR]
	str	r3, [r1, #oVECTADDR]

	/* init system clock */
	bl system_clock_init

#ifndef CONFIG_NAND_SPL
	/* for UART */
	bl uart_asm_init
#endif

#ifdef CONFIG_BOOT_NAND
	/* simple init for NAND */
	bl nand_asm_init
#endif

	/* Memory subsystem address 0x7e00f120 */
	ldr	r0, =ELFIN_MEM_SYS_CFG

	/* Xm0CSn2 = NFCON CS0, Xm0CSn3 = NFCON CS1 */
	mov	r1, #S3C64XX_MEM_SYS_CFG_NAND
	str	r1, [r0]

	bl	mem_ctrl_asm_init

/* Wakeup support. Don't know if it's going to be used, untested. */
	ldr	r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
	ldr	r1, [r0]
	bic	r1, r1, #0xfffffff7
	cmp	r1, #0x8
	beq	wakeup_reset

1:
	mov	lr, r12
	mov	pc, lr

wakeup_reset:

	/* Clear wakeup status register */
	ldr	r0, =(ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET)
	ldr	r1, [r0]
	str	r1, [r0]

	/* LED test */
	ldr	r0, =ELFIN_GPIO_BASE
	ldr	r1, =0x3000
	str	r1, [r0, #GPNDAT_OFFSET]

	/* Load return address and jump to kernel */
	ldr	r0, =(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET)
	/* r1 = physical address of s3c6400_cpu_resume function */
	ldr	r1, [r0]
	/* Jump to kernel (sleep-s3c6400.S) */
	mov	pc, r1
	nop
	nop
/*
 * system_clock_init: Initialize core clock and bus clock.
 * void system_clock_init(void)
 */
system_clock_init:
	ldr	r0, =ELFIN_CLOCK_POWER_BASE	/* 0x7e00f000 */

#ifdef CONFIG_SYNC_MODE
	ldr	r1, [r0, #OTHERS_OFFSET]
	mov	r2, #0x40
	orr	r1, r1, r2
	str	r1, [r0, #OTHERS_OFFSET]

	nop
	nop
	nop
	nop
	nop

	ldr	r2, =0x80
	orr	r1, r1, r2
	str	r1, [r0, #OTHERS_OFFSET]

check_syncack:
	ldr	r1, [r0, #OTHERS_OFFSET]
	ldr	r2, =0xf00
	and	r1, r1, r2
	cmp	r1, #0xf00
	bne	check_syncack
#else	/* ASYNC Mode */
	nop
	nop
	nop
	nop
	nop

	/*
	 * This was unconditional in original Samsung sources, but it doesn't
	 * seem to make much sense on S3C6400.
	 */
#ifndef CONFIG_S3C6400
	ldr	r1, [r0, #OTHERS_OFFSET]
	bic	r1, r1, #0xC0
	orr	r1, r1, #0x40
	str	r1, [r0, #OTHERS_OFFSET]

wait_for_async:
	ldr	r1, [r0, #OTHERS_OFFSET]
	and	r1, r1, #0xf00
	cmp	r1, #0x0
	bne	wait_for_async
#endif

	ldr	r1, [r0, #OTHERS_OFFSET]
	bic	r1, r1, #0x40
	str	r1, [r0, #OTHERS_OFFSET]
#endif

	mov	r1, #0xff00
	orr	r1, r1, #0xff
	str	r1, [r0, #APLL_LOCK_OFFSET]
	str	r1, [r0, #MPLL_LOCK_OFFSET]

	/* Set Clock Divider */
	ldr	r1, [r0, #CLK_DIV0_OFFSET]
	bic	r1, r1, #0x30000
	bic	r1, r1, #0xff00
	bic	r1, r1, #0xff
	ldr	r2, =CLK_DIV_VAL
	orr	r1, r1, r2
	str	r1, [r0, #CLK_DIV0_OFFSET]

	ldr	r1, =APLL_VAL
	str	r1, [r0, #APLL_CON_OFFSET]
	ldr	r1, =MPLL_VAL
	str	r1, [r0, #MPLL_CON_OFFSET]

	/* FOUT of EPLL is 96MHz */
	ldr	r1, =0x200203
	str	r1, [r0, #EPLL_CON0_OFFSET]
	ldr	r1, =0x0
	str	r1, [r0, #EPLL_CON1_OFFSET]

	/* APLL, MPLL, EPLL select to Fout */
	ldr	r1, [r0, #CLK_SRC_OFFSET]
	orr	r1, r1, #0x7
	str	r1, [r0, #CLK_SRC_OFFSET]

	/* wait at least 200us to stablize all clock */
	mov	r1, #0x10000
1:	subs	r1, r1, #1
	bne	1b

	/* Synchronization for VIC port */
#if defined(CONFIG_SYNC_MODE)
	ldr	r1, [r0, #OTHERS_OFFSET]
	orr	r1, r1, #0x20
	str	r1, [r0, #OTHERS_OFFSET]
#elif !defined(CONFIG_S3C6400)
	/* According to 661558um_S3C6400X_rev10.pdf 0x20 is reserved */
	ldr	r1, [r0, #OTHERS_OFFSET]
	bic	r1, r1, #0x20
	str	r1, [r0, #OTHERS_OFFSET]
#endif
	mov	pc, lr


#ifndef CONFIG_NAND_SPL
/*
 * uart_asm_init: Initialize UART's pins
 */
uart_asm_init:
	/* set GPIO to enable UART */
	ldr	r0, =ELFIN_GPIO_BASE
	ldr	r1, =0x220022
	str	r1, [r0, #GPACON_OFFSET]
	mov	pc, lr
#endif

#ifdef CONFIG_BOOT_NAND
/*
 * NAND Interface init for SMDK6400
 */
nand_asm_init:
	ldr	r0, =ELFIN_NAND_BASE
	ldr	r1, [r0, #NFCONF_OFFSET]
	orr	r1, r1, #0x70
	orr	r1, r1, #0x7700
	str	r1, [r0, #NFCONF_OFFSET]

	ldr	r1, [r0, #NFCONT_OFFSET]
	orr	r1, r1, #0x07
	str	r1, [r0, #NFCONT_OFFSET]

	mov	pc, lr
#endif

#ifdef CONFIG_ENABLE_MMU
/*
 * MMU Table for SMDK6400
 */

	/* form a first-level section entry */
.macro FL_SECTION_ENTRY base,ap,d,c,b
	.word (\base << 20) | (\ap << 10) | \
	      (\d << 5) | (1<<4) | (\c << 3) | (\b << 2) | (1<<1)
.endm

.section .mmudata, "a"
	.align 14
	/* the following alignment creates the mmu table at address 0x4000. */
	.globl mmu_table
mmu_table:
	.set __base, 0
	/* 1:1 mapping for debugging */
	.rept 0xA00
	FL_SECTION_ENTRY __base, 3, 0, 0, 0
	.set __base, __base + 1
	.endr

	/* access is not allowed. */
	.rept 0xC00 - 0xA00
	.word 0x00000000
	.endr

	/* 128MB for SDRAM 0xC0000000 -> 0x50000000 */
	.set __base, 0x500
	.rept 0xC80 - 0xC00
	FL_SECTION_ENTRY __base, 3, 0, 1, 1
	.set __base, __base + 1
	.endr

	/* access is not allowed. */
	.rept 0x1000 - 0xc80
	.word 0x00000000
	.endr
#endif
OpenPOWER on IntegriCloud