summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/cpu/mpc85xx/release.S
blob: fcfba7ec19d2b5546ce53b2e6b570400a2e54ff8 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
/*
 * Copyright 2008-2012 Freescale Semiconductor, Inc.
 * Kumar Gala <kumar.gala@freescale.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <asm-offsets.h>
#include <config.h>
#include <mpc85xx.h>
#include <version.h>

#include <ppc_asm.tmpl>
#include <ppc_defs.h>

#include <asm/cache.h>
#include <asm/mmu.h>

/* To boot secondary cpus, we need a place for them to start up.
 * Normally, they start at 0xfffffffc, but that's usually the
 * firmware, and we don't want to have to run the firmware again.
 * Instead, the primary cpu will set the BPTR to point here to
 * this page.  We then set up the core, and head to
 * start_secondary.  Note that this means that the code below
 * must never exceed 1023 instructions (the branch at the end
 * would then be the 1024th).
 */
	.globl	__secondary_start_page
	.align	12
__secondary_start_page:
/* First do some preliminary setup */
	lis	r3, HID0_EMCP@h		/* enable machine check */
#ifndef CONFIG_E500MC
	ori	r3,r3,HID0_TBEN@l	/* enable Timebase */
#endif
#ifdef CONFIG_PHYS_64BIT
	ori	r3,r3,HID0_ENMAS7@l	/* enable MAS7 updates */
#endif
	mtspr	SPRN_HID0,r3

#ifndef CONFIG_E500MC
	li	r3,(HID1_ASTME|HID1_ABE)@l	/* Addr streaming & broadcast */
	mfspr   r0,PVR
	andi.	r0,r0,0xff
	cmpwi	r0,0x50@l	/* if we are rev 5.0 or greater set MBDD */
	blt 1f
	/* Set MBDD bit also */
	ori r3, r3, HID1_MBDD@l
1:
	mtspr	SPRN_HID1,r3
#endif

#ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999
	mfspr	r3,SPRN_HDBCR1
	oris	r3,r3,0x0100
	mtspr	SPRN_HDBCR1,r3
#endif

#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
	mfspr	r3,SPRN_SVR
	rlwinm	r3,r3,0,0xff
	li	r4,CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV
	cmpw	r3,r4
	beq	1f

#ifdef CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2
	li	r4,CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2
	cmpw	r3,r4
	beq	1f
#endif

	/* Not a supported revision affected by erratum */
	b	2f

1:	/* Erratum says set bits 55:60 to 001001 */
	msync
	isync
	mfspr	r3,SPRN_HDBCR0
	li	r4,0x48
	rlwimi	r3,r4,0,0x1f8
	mtspr	SPRN_HDBCR0,r3
	isync
2:
#endif

	/* Enable branch prediction */
	lis	r3,BUCSR_ENABLE@h
	ori	r3,r3,BUCSR_ENABLE@l
	mtspr	SPRN_BUCSR,r3

	/* Ensure TB is 0 */
	li	r3,0
	mttbl	r3
	mttbu	r3

	/* Enable/invalidate the I-Cache */
	lis	r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
	ori	r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
	mtspr	SPRN_L1CSR1,r2
1:
	mfspr	r3,SPRN_L1CSR1
	and.	r1,r3,r2
	bne	1b

	lis	r3,(L1CSR1_CPE|L1CSR1_ICE)@h
	ori	r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
	mtspr	SPRN_L1CSR1,r3
	isync
2:
	mfspr	r3,SPRN_L1CSR1
	andi.	r1,r3,L1CSR1_ICE@l
	beq	2b

	/* Enable/invalidate the D-Cache */
	lis	r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
	ori	r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
	mtspr	SPRN_L1CSR0,r2
1:
	mfspr	r3,SPRN_L1CSR0
	and.	r1,r3,r2
	bne	1b

	lis	r3,(L1CSR0_CPE|L1CSR0_DCE)@h
	ori	r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
	mtspr	SPRN_L1CSR0,r3
	isync
2:
	mfspr	r3,SPRN_L1CSR0
	andi.	r1,r3,L1CSR0_DCE@l
	beq	2b

#define toreset(x) (x - __secondary_start_page + 0xfffff000)

	/* get our PIR to figure out our table entry */
	lis	r3,toreset(__spin_table_addr)@h
	ori	r3,r3,toreset(__spin_table_addr)@l
	lwz	r3,0(r3)

	mfspr	r0,SPRN_PIR
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
/*
 * PIR definition for Chassis 2
 * 0-17 Reserved (logic 0s)
 * 18-19 CHIP_ID,    2'b00      - SoC 1
 *                  all others - reserved
 * 20-24 CLUSTER_ID 5'b00000   - CCM 1
 *                  all others - reserved
 * 25-26 CORE_CLUSTER_ID 2'b00 - cluster 1
 *                       2'b01 - cluster 2
 *                       2'b10 - cluster 3
 *                       2'b11 - cluster 4
 * 27-28 CORE_ID         2'b00 - core 0
 *                       2'b01 - core 1
 *                       2'b10 - core 2
 *                       2'b11 - core 3
 * 29-31 THREAD_ID       3'b000 - thread 0
 *                       3'b001 - thread 1
 *
 * Power-on PIR increments threads by 0x01, cores within a cluster by 0x08
 * and clusters by 0x20.
 *
 * We renumber PIR so that all threads in the system are consecutive.
 */

	rlwinm	r8,r0,29,0x03	/* r8 = core within cluster */
	srwi	r10,r0,5	/* r10 = cluster */

	mulli	r5,r10,CONFIG_SYS_FSL_CORES_PER_CLUSTER
	add	r5,r5,r8	/* for spin table index */
	mulli	r4,r5,CONFIG_SYS_FSL_THREADS_PER_CORE	/* for PIR */
#elif	defined(CONFIG_E500MC)
	rlwinm	r4,r0,27,27,31
	mr	r5,r4
#else
	mr	r4,r0
	mr	r5,r4
#endif

	/*
	 * r10 has the base address for the entry.
	 * we cannot access it yet before setting up a new TLB
	 */
	slwi	r8,r5,6	/* spin table is padded to 64 byte */
	add	r10,r3,r8

	mtspr	SPRN_PIR,r4	/* write to PIR register */

#ifdef CONFIG_SYS_CACHE_STASHING
	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
	slwi	r8,r4,1
	addi	r8,r8,32
	mtspr	L1CSR2,r8
#endif

#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
	defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
	/*
	 * CPU22 applies to P4080 rev 1.0, 2.0, fixed in 3.0
	 * NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
	 * also appleis to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1
	 */
	mfspr   r3,SPRN_SVR
	rlwinm	r6,r3,24,~0x800		/* clear E bit */

	lis	r5,SVR_P4080@h
	ori	r5,r5,SVR_P4080@l
	cmpw	r6,r5
	bne	1f

	rlwinm  r3,r3,0,0xf0
	li      r5,0x30
	cmpw    r3,r5
	bge     2f
1:
#ifdef	CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
	lis	r3,toreset(enable_cpu_a011_workaround)@ha
	lwz	r3,toreset(enable_cpu_a011_workaround)@l(r3)
	cmpwi	r3,0
	beq	2f
#endif
	mfspr	r3,L1CSR2
	oris	r3,r3,(L1CSR2_DCWS)@h
	mtspr	L1CSR2,r3
2:
#endif

#ifdef CONFIG_SYS_FSL_ERRATUM_A005812
	/*
	 * A-005812 workaround sets bit 32 of SPR 976 for SoCs running in
	 * write shadow mode. This code should run after other code setting
	 * DCWS.
	 */
	mfspr	r3,L1CSR2
	andis.	r3,r3,(L1CSR2_DCWS)@h
	beq	1f
	mfspr	r3, SPRN_HDBCR0
	oris	r3, r3, 0x8000
	mtspr	SPRN_HDBCR0, r3
1:
#endif

#ifdef CONFIG_BACKSIDE_L2_CACHE
	/* skip L2 setup on P2040/P2040E as they have no L2 */
	mfspr	r3,SPRN_SVR
	rlwinm	r6,r3,24,~0x800		/* clear E bit of SVR */

	lis	r3,SVR_P2040@h
	ori	r3,r3,SVR_P2040@l
	cmpw	r6,r3
	beq 3f

	/* Enable/invalidate the L2 cache */
	msync
	lis	r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@h
	ori	r2,r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@l
	mtspr	SPRN_L2CSR0,r2
1:
	mfspr	r3,SPRN_L2CSR0
	and.	r1,r3,r2
	bne	1b

#ifdef CONFIG_SYS_CACHE_STASHING
	/* set stash id to (coreID) * 2 + 32 + L2 (1) */
	addi	r3,r8,1
	mtspr	SPRN_L2CSR1,r3
#endif

	lis	r3,CONFIG_SYS_INIT_L2CSR0@h
	ori	r3,r3,CONFIG_SYS_INIT_L2CSR0@l
	mtspr	SPRN_L2CSR0,r3
	isync
2:
	mfspr	r3,SPRN_L2CSR0
	andis.	r1,r3,L2CSR0_L2E@h
	beq	2b
#endif
3:
	/* setup mapping for the spin table, WIMGE=0b00100 */
	lis	r13,toreset(__spin_table_addr)@h
	ori	r13,r13,toreset(__spin_table_addr)@l
	lwz	r13,0(r13)
	/* mask by 4K */
	rlwinm	r13,r13,0,0,19

	lis	r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
	mtspr	SPRN_MAS0,r11
	lis	r11,(MAS1_VALID|MAS1_IPROT)@h
	ori	r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
	mtspr	SPRN_MAS1,r11
	oris	r11,r13,(MAS2_M|MAS2_G)@h
	ori	r11,r13,(MAS2_M|MAS2_G)@l
	mtspr	SPRN_MAS2,r11
	oris	r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
	ori	r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
	mtspr	SPRN_MAS3,r11
	li	r11,0
	mtspr	SPRN_MAS7,r11
	tlbwe

	/*
	 * __bootpg_addr has the address of __second_half_boot_page
	 * jump there in AS=1 space with cache enabled
	 */
	lis	r13,toreset(__bootpg_addr)@h
	ori	r13,r13,toreset(__bootpg_addr)@l
	lwz	r11,0(r13)
	mtspr	SPRN_SRR0,r11
	mfmsr	r13
	ori	r12,r13,MSR_IS|MSR_DS@l
	mtspr	SPRN_SRR1,r12
	rfi

	/*
	 * Allocate some space for the SDRAM address of the bootpg.
	 * This variable has to be in the boot page so that it can
	 * be accessed by secondary cores when they come out of reset.
	 */
	.align L1_CACHE_SHIFT
	.globl __bootpg_addr
__bootpg_addr:
	.long	0

	.global __spin_table_addr
__spin_table_addr:
	.long	0

	/*
	 * This variable is set by cpu_init_r() after parsing hwconfig
	 * to enable workaround for erratum NMG_CPU_A011.
	 */
	.align L1_CACHE_SHIFT
	.global enable_cpu_a011_workaround
enable_cpu_a011_workaround:
	.long	1

	/* Fill in the empty space.  The actual reset vector is
	 * the last word of the page */
__secondary_start_code_end:
	.space 4092 - (__secondary_start_code_end - __secondary_start_page)
__secondary_reset_vector:
	b	__secondary_start_page


/* this is a separated page for the spin table and cacheable boot code */
	.align L1_CACHE_SHIFT
	.global __second_half_boot_page
__second_half_boot_page:
#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
	lis	r3,(spin_table_compat - __second_half_boot_page)@h
	ori	r3,r3,(spin_table_compat - __second_half_boot_page)@l
	add	r3,r3,r11 /* r11 has the address of __second_half_boot_page */
	lwz	r14,0(r3)
#endif

#define ENTRY_ADDR_UPPER	0
#define ENTRY_ADDR_LOWER	4
#define ENTRY_R3_UPPER		8
#define ENTRY_R3_LOWER		12
#define ENTRY_RESV		16
#define ENTRY_PIR		20
#define ENTRY_SIZE		64
	/*
	 * setup the entry
	 * r10 has the base address of the spin table.
	 * spin table is defined as
	 * struct {
	 *	uint64_t entry_addr;
	 *	uint64_t r3;
	 *	uint32_t rsvd1;
	 *	uint32_t pir;
	 * };
	 * we pad this struct to 64 bytes so each entry is in its own cacheline
	 */
	li	r3,0
	li	r8,1
	mfspr	r4,SPRN_PIR
	stw	r3,ENTRY_ADDR_UPPER(r10)
	stw	r3,ENTRY_R3_UPPER(r10)
	stw	r4,ENTRY_R3_LOWER(r10)
	stw	r3,ENTRY_RESV(r10)
	stw	r4,ENTRY_PIR(r10)
	msync
	stw	r8,ENTRY_ADDR_LOWER(r10)

	/* spin waiting for addr */
3:
/*
 * To comply with ePAPR 1.1, the spin table has been moved to cache-enabled
 * memory. Old OS may not work with this change. A patch is waiting to be
 * accepted for Linux kernel. Other OS needs similar fix to spin table.
 * For OSes with old spin table code, we can enable this temporary fix by
 * setting environmental variable "spin_table_compat". For new OSes, set
 * "spin_table_compat=no". After Linux is fixed, we can remove this macro
 * and related code. For now, it is enabled by default.
 */
#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
	cmpwi   r14,0
	beq     4f
	dcbf    0, r10
	sync
4:
#endif
	lwz	r4,ENTRY_ADDR_LOWER(r10)
	andi.	r11,r4,1
	bne	3b
	isync

	/* setup IVORs to match fixed offsets */
#include "fixed_ivor.S"

	/* get the upper bits of the addr */
	lwz	r11,ENTRY_ADDR_UPPER(r10)

	/* setup branch addr */
	mtspr	SPRN_SRR0,r4

	/* mark the entry as released */
	li	r8,3
	stw	r8,ENTRY_ADDR_LOWER(r10)

	/* mask by ~64M to setup our tlb we will jump to */
	rlwinm	r12,r4,0,0,5

	/*
	 * setup r3, r4, r5, r6, r7, r8, r9
	 * r3 contains the value to put in the r3 register at secondary cpu
	 * entry. The high 32-bits are ignored on 32-bit chip implementations.
	 * 64-bit chip implementations however shall load all 64-bits
	 */
#ifdef CONFIG_SYS_PPC64
	ld	r3,ENTRY_R3_UPPER(r10)
#else
	lwz	r3,ENTRY_R3_LOWER(r10)
#endif
	li	r4,0
	li	r5,0
	li	r6,0
	lis	r7,(64*1024*1024)@h
	li	r8,0
	li	r9,0

	/* load up the pir */
	lwz	r0,ENTRY_PIR(r10)
	mtspr	SPRN_PIR,r0
	mfspr	r0,SPRN_PIR
	stw	r0,ENTRY_PIR(r10)

	mtspr	IVPR,r12
/*
 * Coming here, we know the cpu has one TLB mapping in TLB1[0]
 * which maps 0xfffff000-0xffffffff one-to-one.  We set up a
 * second mapping that maps addr 1:1 for 64M, and then we jump to
 * addr
 */
	lis	r10,(MAS0_TLBSEL(1)|MAS0_ESEL(0))@h
	mtspr	SPRN_MAS0,r10
	lis	r10,(MAS1_VALID|MAS1_IPROT)@h
	ori	r10,r10,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
	mtspr	SPRN_MAS1,r10
	/* WIMGE = 0b00000 for now */
	mtspr	SPRN_MAS2,r12
	ori	r12,r12,(MAS3_SX|MAS3_SW|MAS3_SR)
	mtspr	SPRN_MAS3,r12
#ifdef CONFIG_ENABLE_36BIT_PHYS
	mtspr	SPRN_MAS7,r11
#endif
	tlbwe

/* Now we have another mapping for this page, so we jump to that
 * mapping
 */
	mtspr	SPRN_SRR1,r13
	rfi


	.align 6
	.globl __spin_table
__spin_table:
	.space CONFIG_MAX_CPUS*ENTRY_SIZE

#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
	.align L1_CACHE_SHIFT
	.global spin_table_compat
spin_table_compat:
	.long	1

#endif

__spin_table_end:
	.space 4096 - (__spin_table_end - __spin_table)
OpenPOWER on IntegriCloud