/* * (C) Copyright 2002 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ */ /* * I2C test * * For verifying the I2C bus, a full I2C bus scanning is performed. * * #ifdef CONFIG_SYS_POST_I2C_ADDRS * The test is considered as passed if all the devices and only the devices * in the list are found. * #ifdef CONFIG_SYS_POST_I2C_IGNORES * Ignore devices listed in CONFIG_SYS_POST_I2C_IGNORES. These devices * are optional or not vital to board functionality. * #endif * #else [ ! CONFIG_SYS_POST_I2C_ADDRS ] * The test is considered as passed if any I2C device is found. * #endif */ #include #include #include #if CONFIG_POST & CONFIG_SYS_POST_I2C static int i2c_ignore_device(unsigned int chip) { #ifdef CONFIG_SYS_POST_I2C_IGNORES const unsigned char i2c_ignore_list[] = CONFIG_SYS_POST_I2C_IGNORES; int i; for (i = 0; i < sizeof(i2c_ignore_list); i++) if (i2c_ignore_list[i] == chip) return 1; #endif return 0; } int i2c_post_test (int flags) { unsigned int i; #ifndef CONFIG_SYS_POST_I2C_ADDRS /* Start at address 1, address 0 is the general call address */ for (i = 1; i < 128; i++) { if (i2c_ignore_device(i)) continue; if (i2c_probe (i) == 0) return 0; } /* No devices found */ return -1; #else unsigned int ret = 0; int j; unsigned char i2c_addr_list[] = CONFIG_SYS_POST_I2C_ADDRS; /* Start at address 1, address 0 is the general call address */ for (i = 1; i < 128; i++) { if (i2c_ignore_device(i)) continue; if (i2c_probe(i) != 0) continue; for (j = 0; j < sizeof(i2c_addr_list); ++j) { if (i == i2c_addr_list[j]) { i2c_addr_list[j] = 0xff; break; } } if (j == sizeof(i2c_addr_list)) { ret = -1; post_log("I2C: addr %02x not expected\n", i); } } for (i = 0; i < sizeof(i2c_addr_list); ++i) { if (i2c_addr_list[i] == 0xff) continue; if (i2c_ignore_device(i2c_addr_list[i])) continue; post_log("I2C: addr %02x did not respond\n", i2c_addr_list[i]); ret = -1; } return ret; #endif } #endif /* CONFIG_POST & CONFIG_SYS_POST_I2C */