/* * (C) Copyright 2007 Czech Technical University. * * Michal SIMEK * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H #include "../board/xilinx/xupv2p/xparameters.h" #define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ #define CONFIG_XUPV2P 1 /* uart */ #define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR #define CONFIG_BAUDRATE XILINX_UART_BAUDRATE #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } /* ethernet */ #define CONFIG_EMAC 1 #define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES /* * setting reset address * * TEXT_BASE is set to place, where the U-BOOT run in RAM, but * if you want to store U-BOOT in flash, set CFG_RESET_ADDRESS * to FLASH memory and after loading bitstream jump to FLASH. * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze * jump to CFG_RESET_ADDRESS where is the original U-BOOT code. */ #define CFG_RESET_ADDRESS 0x36000000 /* gpio */ #define CFG_GPIO_0 1 #define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR /* interrupt controller */ #define CFG_INTC_0 1 #define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR #define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS /* timer */ #define CFG_TIMER_0 1 #define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR #define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ #define FREQUENCE XILINX_CLOCK_FREQ #define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) /* * memory layout - Example * TEXT_BASE = 0x3600_0000; * CFG_SRAM_BASE = 0x3000_0000; * CFG_SRAM_SIZE = 0x1000_0000; * * CFG_GBL_DATA_OFFSET = 0x3000_0000 + 0x1000_0000 - 0x1000 = 0x3FFF_F000 * CFG_MONITOR_BASE = 0x3FFF_F000 - 0x40000 = 0x3FFB_F000 * CFG_MALLOC_BASE = 0x3FFB_F000 - 0x40000 = 0x3FF7_F000 * * 0x3000_0000 CFG_SDRAM_BASE * FREE * 0x3600_0000 TEXT_BASE * U-BOOT code * 0x3602_0000 * FREE * * STACK * 0x3FF7_F000 CFG_MALLOC_BASE * MALLOC_AREA 256kB Alloc * 0x3FFB_F000 CFG_MONITOR_BASE * MONITOR_CODE 256kB Env * 0x3FFF_F000 CFG_GBL_DATA_OFFSET * GLOBAL_DATA 4kB bd, gd * 0x4000_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE */ /* ddr sdram - main memory */ #define CFG_SDRAM_BASE XILINX_RAM_START #define CFG_SDRAM_SIZE XILINX_RAM_SIZE #define CFG_MEMTEST_START CFG_SDRAM_BASE #define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000) /* global pointer */ #define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ #define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */ /* monitor code */ #define SIZE 0x40000 #define CFG_MONITOR_LEN SIZE #define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN) #define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_MALLOC_LEN SIZE #define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) /* stack */ #define CFG_INIT_SP_OFFSET CFG_MALLOC_BASE #define CFG_NO_FLASH 1 #define CFG_ENV_IS_NOWHERE 1 #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ #include #define CONFIG_CMD_MEMORY #define CONFIG_CMD_IRQ #define CONFIG_CMD_BDI #define CONFIG_CMD_NET #define CONFIG_CMD_IMI #define CONFIG_CMD_ECHO #define CONFIG_CMD_CACHE #define CONFIG_CMD_RUN #define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_ASKENV #define CONFIG_CMD_LOADS #define CONFIG_CMD_LOADB #define CONFIG_CMD_MISC #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_PING /* Miscellaneous configurable options */ #define CFG_PROMPT "U-Boot-mONStR> " #define CFG_CBSIZE 512 /* size of console buffer */ #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */ #define CFG_MAXARGS 15 /* max number of command args */ #define CFG_LONGHELP #define CFG_LOAD_ADDR 0x12000000 /* default load address */ #define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" #define CONFIG_HOSTNAME "ml401" #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" #define CONFIG_IPADDR 192.168.0.3 #define CONFIG_SERVERIP 192.168.0.5 #define CONFIG_GATEWAYIP 192.168.0.1 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD /* architecture dependent code */ #define CFG_USR_EXCEP /* user exception */ #define CFG_HZ 1000 #define CONFIG_PREBOOT "echo U-BOOT by mONStR;" \ "base 0;" \ "echo" /* system ace */ #define CONFIG_SYSTEMACE /* #define DEBUG_SYSTEMACE */ #define SYSTEMACE_CONFIG_FPGA #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH #define CONFIG_DOS_PARTITION #endif /* __CONFIG_H */