/* * Configuation settings for the Renesas Technology R0P7785LC0011RL board * * Copyright (C) 2008 Yoshihiro Shimoda * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __SH7785LCR_H #define __SH7785LCR_H #undef DEBUG #define CONFIG_SH 1 #define CONFIG_SH4A 1 #define CONFIG_CPU_SH7785 1 #define CONFIG_SH7785LCR 1 #define CONFIG_CMD_FLASH #define CONFIG_CMD_MEMORY #define CONFIG_CMD_PCI #define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_NFS #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM #define CONFIG_CMD_RUN #define CONFIG_CMD_ENV #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #define CONFIG_MAC_PARTITION #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC1,115200 root=/dev/nfs ip=dhcp" #define CONFIG_EXTRA_ENV_SETTINGS \ "bootdevice=0:1\0" \ "usbload=usb reset;usbboot;usb stop;bootm\0" #define CONFIG_VERSION_VARIABLE #undef CONFIG_SHOW_BOOT_PROGRESS /* MEMORY */ #define SH7785LCR_SDRAM_BASE (0x08000000) #define SH7785LCR_SDRAM_SIZE (128 * 1024 * 1024) #define SH7785LCR_FLASH_BASE_1 (0xa0000000) #define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024) #define SH7785LCR_USB_BASE (0xb4000000) #define CFG_LONGHELP #define CFG_PROMPT "=> " #define CFG_CBSIZE 256 #define CFG_PBSIZE 256 #define CFG_MAXARGS 16 #define CFG_BARGSIZE 512 #define CFG_BAUDRATE_TABLE { 115200 } /* SCIF */ #define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF1 1 #define CONFIG_SCIF_EXT_CLOCK 1 #undef CFG_CONSOLE_INFO_QUIET #undef CFG_CONSOLE_OVERWRITE_ROUTINE #undef CFG_CONSOLE_ENV_OVERWRITE #define CFG_MEMTEST_START (SH7785LCR_SDRAM_BASE) #define CFG_MEMTEST_END (CFG_MEMTEST_START + \ (SH7785LCR_SDRAM_SIZE) - \ 4 * 1024 * 1024) #undef CFG_ALT_MEMTEST #undef CFG_MEMTEST_SCRATCH #undef CFG_LOADS_BAUD_CHANGE #define CFG_SDRAM_BASE (SH7785LCR_SDRAM_BASE) #define CFG_SDRAM_SIZE (SH7785LCR_SDRAM_SIZE) #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 16 * 1024 * 1024) #define CFG_MONITOR_BASE (SH7785LCR_FLASH_BASE_1) #define CFG_MONITOR_LEN (512 * 1024) #define CFG_MALLOC_LEN (512 * 1024) #define CFG_GBL_DATA_SIZE (256) #define CFG_BOOTMAPSZ (8 * 1024 * 1024) /* FLASH */ #define CONFIG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI #undef CFG_FLASH_QUIET_TEST #define CFG_FLASH_EMPTY_INFO #define CFG_FLASH_BASE (SH7785LCR_FLASH_BASE_1) #define CFG_MAX_FLASH_SECT 512 #define CFG_MAX_FLASH_BANKS 1 #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + \ (0 * SH7785LCR_FLASH_BANK_SIZE) } #define CFG_FLASH_ERASE_TOUT (3 * 1000) #define CFG_FLASH_WRITE_TOUT (3 * 1000) #define CFG_FLASH_LOCK_TOUT (3 * 1000) #define CFG_FLASH_UNLOCK_TOUT (3 * 1000) #undef CFG_FLASH_PROTECTION #undef CFG_DIRECT_FLASH_TFTP /* R8A66597 */ #define LITTLEENDIAN /* for include/usb.h */ #define CONFIG_USB_R8A66597_HCD #define CONFIG_R8A66597_BASE_ADDR SH7785LCR_USB_BASE #define CONFIG_R8A66597_XTAL 0x0000 /* 12MHz */ #define CONFIG_R8A66597_LDRV 0x8000 /* 3.3V */ #define CONFIG_R8A66597_ENDIAN 0x0000 /* little */ /* PCI Controller */ #define CONFIG_PCI #define CONFIG_SH4_PCI #define CONFIG_SH7780_PCI #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW 1 #define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS #define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ #define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ /* Network device (RTL8169) support */ #define CONFIG_NET_MULTI #define CONFIG_RTL8169 /* ENV setting */ #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_OVERWRITE 1 #define CONFIG_ENV_SECT_SIZE (256 * 1024) #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) #define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CFG_FLASH_BASE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) /* Board Clock */ /* The SCIF used external clock. system clock only used timer. */ #define CONFIG_SYS_CLK_FREQ 50000000 #define TMU_CLK_DIVIDER 4 #define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) #endif /* __SH7785LCR_H */