/* * Copyright 2015 Toradex, Inc. * * Configuration settings for the Toradex VF50/VF61 module. * * Based on vf610twr.h: * Copyright 2013 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H #include #define CONFIG_VF610 #define CONFIG_SYS_THUMB_BUILD #define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET #define CONFIG_SYS_FSL_CLK #define CONFIG_ARCH_MISC_INIT #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_CMD_FUSE #ifdef CONFIG_CMD_FUSE #define CONFIG_MXC_OCOTP #endif /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_FSL_LPUART #define LPUART_BASE UART0_BASE /* Allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_VERSION_VARIABLE #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 #define CONFIG_CMD_ASKENV /* NAND support */ #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR /* GPIO support */ #define CONFIG_DM_GPIO #define CONFIG_VYBRID_GPIO /* Dynamic MTD partition support */ #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ #define CONFIG_MTD_PARTITIONS #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define MTDIDS_DEFAULT "nand0=vf610_nfc" #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \ "128k(vf-bcb)ro," \ "1408k(u-boot)ro," \ "512k(u-boot-env)," \ "-(ubi)" #define CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_ESDHC_NUM 1 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT3 #define CONFIG_CMD_EXT4 #define CONFIG_DOS_PARTITION #define CONFIG_RBTREE #define CONFIG_LZO #define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_UBI #define CONFIG_MTD_UBI_FASTMAP #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET1_BASE_ADDR #define CONFIG_FEC_XCV_TYPE RMII #define CONFIG_FEC_MXC_PHYADDR 0 #define CONFIG_PHYLIB #define CONFIG_PHY_MICREL #define CONFIG_IPADDR 192.168.10.2 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_SERVERIP 192.168.10.1 #define CONFIG_BOOTDELAY 1 #define CONFIG_BOARD_LATE_INIT #define CONFIG_LOADADDR 0x80008000 #define CONFIG_FDTADDR 0x84000000 /* We boot from the gfxRAM area of the OCRAM. */ #define CONFIG_SYS_TEXT_BASE 0x3f408000 #define CONFIG_BOARD_SIZE_LIMIT 524288 #define SD_BOOTCMD \ "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \ "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \ "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ #define NFS_BOOTCMD \ "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ "nfsboot=run setup; " \ "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \ "${setupargs} ${vidargs}; echo Booting from NFS...;" \ "dhcp ${kernel_addr_r} && " \ "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ #define UBI_BOOTCMD \ "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ "ubi.fm_autoconvert=1\0" \ "ubiboot=run setup; " \ "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \ "${setupargs} ${vidargs}; echo Booting from NAND...; " \ "ubi part ubi && ubifsmount ubi0:rootfs && " \ "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \ "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot" #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4" #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0x82000000\0" \ "fdt_addr_r=0x84000000\0" \ "kernel_file=zImage\0" \ "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \ "fdt_board=eval-v3\0" \ "defargs=\0" \ "console=ttyLP0\0" \ "setup=setenv setupargs " \ "console=tty1 console=${console}" \ ",${baudrate}n8 ${memargs}\0" \ "setsdupdate=mmc rescan && set interface mmc && " \ "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ "source ${loadaddr}\0" \ "setusbupdate=usb start && set interface usb && " \ "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ "source ${loadaddr}\0" \ "setupdate=run setsdupdate || run setusbupdate\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ SD_BOOTCMD \ NFS_BOOTCMD \ UBI_BOOTCMD /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #undef CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80010000 #define CONFIG_SYS_MEMTEST_END 0x87C00000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING /* * Stack sizes * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ /* Physical memory map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM (0x80000000) #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* Environment organization */ #define CONFIG_SYS_NO_FLASH #ifdef CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) #define CONFIG_ENV_SIZE (8 * 1024) #endif #ifdef CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE (64 * 2048) #define CONFIG_ENV_RANGE (4 * 64 * 2048) #define CONFIG_ENV_OFFSET (12 * 64 * 2048) #endif #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_CACHELINE_SIZE 32 /* USB Host Support */ #define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_VF #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* USB Client Support */ #define CONFIG_USB_GADGET #define CONFIG_CI_UDC #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_TRDX_VID 0x1B67 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017 #define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018 #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019 #define CONFIG_G_DNL_MANUFACTURER "Toradex" #define CONFIG_G_DNL_VENDOR_NUM CONFIG_TRDX_VID #define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50 /* USB DFU */ #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_CMD_DFU #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND #define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) /* USB Storage */ #define CONFIG_USB_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_CMD_USB_MASS_STORAGE /* Enable SPI support */ #ifdef CONFIG_OF_CONTROL #define CONFIG_DM_SPI #define CONFIG_CMD_SPI #define CONFIG_FSL_DSPI #endif #endif /* __CONFIG_H */