/* * U-Boot - Common settings for Analog Devices boards */ #ifndef __CONFIG_BFIN_ADI_COMMON_H__ #define __CONFIG_BFIN_ADI_COMMON_H__ /* * Command Settings */ #ifndef _CONFIG_CMD_DEFAULT_H # include # if ADI_CMDS_NETWORK # define CONFIG_CMD_DHCP # define CONFIG_CMD_PING # ifdef CONFIG_BFIN_MAC # define CONFIG_CMD_MII # endif # else # undef CONFIG_CMD_BOOTD # undef CONFIG_CMD_NET # undef CONFIG_CMD_NFS # endif # ifdef CONFIG_LIBATA # define CONFIG_CMD_FAT # define CONFIG_CMD_SATA # define CONFIG_DOS_PARTITION # endif # ifdef CONFIG_MMC # define CONFIG_CMD_FAT # define CONFIG_CMD_MMC # define CONFIG_DOS_PARTITION # endif # ifdef CONFIG_USB # define CONFIG_CMD_EXT2 # define CONFIG_CMD_FAT # define CONFIG_CMD_USB # define CONFIG_CMD_USB_STORAGE # define CONFIG_DOS_PARTITION # endif # ifdef CONFIG_NAND_PLAT # define CONFIG_CMD_NAND # endif # ifdef CONFIG_POST # define CONFIG_CMD_DIAG # endif # ifdef CONFIG_RTC_BFIN # define CONFIG_CMD_DATE # endif # ifdef CONFIG_SPI # define CONFIG_CMD_EEPROM # endif # if defined(CONFIG_BFIN_SPI) || defined(CONFIG_SOFT_SPI) # define CONFIG_CMD_SPI # endif # ifdef CONFIG_SPI_FLASH # define CONFIG_CMD_SF # endif # if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) # define CONFIG_CMD_I2C # endif # ifdef CONFIG_SYS_NO_FLASH # undef CONFIG_CMD_FLASH # undef CONFIG_CMD_IMLS # else # define CONFIG_CMD_JFFS2 # endif # define CONFIG_CMD_BOOTLDR # define CONFIG_CMD_CACHE # define CONFIG_CMD_CPLBINFO # define CONFIG_CMD_ELF # define CONFIG_ELF_SIMPLE_LOAD # define CONFIG_CMD_REGINFO # define CONFIG_CMD_STRINGS # if defined(__ADSPBF51x__) || defined(__ADSPBF52x__) || defined(__ADSPBF54x__) # define CONFIG_CMD_OTP # define CONFIG_CMD_SPIBOOTLDR # endif #endif /* * Console Settings */ #define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_AUTO_COMPLETE 1 #define CONFIG_LOADS_ECHO 1 #define CONFIG_JTAG_CONSOLE #ifndef CONFIG_BAUDRATE # define CONFIG_BAUDRATE 57600 #endif /* * Debug Settings */ #define CONFIG_ENV_OVERWRITE 1 #define CONFIG_DEBUG_DUMP 1 #define CONFIG_KALLSYMS 1 #define CONFIG_PANIC_HANG 1 /* * Env Settings */ #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) # define CONFIG_BOOTDELAY -1 #else # define CONFIG_BOOTDELAY 5 #endif #ifndef CONFIG_BOOTCOMMAND # define CONFIG_BOOTCOMMAND "run ramboot" #endif #ifdef CONFIG_VIDEO # define CONFIG_BOOTARGS_VIDEO "console=tty0 " #else # define CONFIG_BOOTARGS_VIDEO "" #endif #ifndef CONFIG_BOOTARGS_ROOT # define CONFIG_BOOTARGS_ROOT "/dev/mtdblock0 rw" #endif #define CONFIG_BOOTARGS \ "root=" CONFIG_BOOTARGS_ROOT " " \ "clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \ "earlyprintk=" \ "serial," \ "uart" MK_STR(CONFIG_UART_CONSOLE) "," \ MK_STR(CONFIG_BAUDRATE) " " \ CONFIG_BOOTARGS_VIDEO \ "console=ttyBF0," MK_STR(CONFIG_BAUDRATE) #if defined(CONFIG_CMD_NAND) # define NAND_ENV_SETTINGS \ "nandargs=set bootargs " CONFIG_BOOTARGS "\0" \ "nandboot=" \ "nand read $(loadaddr) 0x20000 0x100000;" \ "run nandargs;" \ "bootm" \ "\0" #else # define NAND_ENV_SETTINGS #endif #if defined(CONFIG_CMD_NET) # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) # define UBOOT_ENV_FILE "u-boot.bin" # else # define UBOOT_ENV_FILE "u-boot.ldr" # endif # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) # ifdef CONFIG_SPI # define UBOOT_ENV_UPDATE \ "eeprom write $(loadaddr) 0x0 $(filesize)" # else # define UBOOT_ENV_UPDATE \ "sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \ "sf erase 0 0x40000;" \ "sf write $(loadaddr) 0 $(filesize)" # endif # elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) # define UBOOT_ENV_UPDATE \ "nand unlock 0 0x40000;" \ "nand erase 0 0x40000;" \ "nand write $(loadaddr) 0 0x40000" # else # define UBOOT_ENV_UPDATE \ "protect off 0x20000000 0x2003FFFF;" \ "erase 0x20000000 0x2003FFFF;" \ "cp.b $(loadaddr) 0x20000000 $(filesize)" # endif # define NETWORK_ENV_SETTINGS \ "ubootfile=" UBOOT_ENV_FILE "\0" \ "update=" \ "tftp $(loadaddr) $(ubootfile);" \ UBOOT_ENV_UPDATE \ "\0" \ "addip=set bootargs $(bootargs) " \ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \ "$(hostname):eth0:off" \ "\0" \ \ "ramfile=uImage\0" \ "ramargs=set bootargs " CONFIG_BOOTARGS "\0" \ "ramboot=" \ "tftp $(loadaddr) $(ramfile);" \ "run ramargs;" \ "run addip;" \ "bootm" \ "\0" \ \ "nfsfile=vmImage\0" \ "nfsargs=set bootargs " \ "root=/dev/nfs rw " \ "nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \ "\0" \ "nfsboot=" \ "tftp $(loadaddr) $(nfsfile);" \ "run nfsargs;" \ "run addip;" \ "bootm" \ "\0" #else # define NETWORK_ENV_SETTINGS #endif #define CONFIG_EXTRA_ENV_SETTINGS \ NAND_ENV_SETTINGS \ NETWORK_ENV_SETTINGS \ "flashboot=bootm 0x20100000\0" /* * Network Settings */ #ifdef CONFIG_CMD_NET # define CONFIG_IPADDR 192.168.0.15 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_GATEWAYIP 192.168.0.1 # define CONFIG_SERVERIP 192.168.0.2 # define CONFIG_ROOTPATH /romfs # ifdef CONFIG_CMD_DHCP # ifndef CONFIG_SYS_AUTOLOAD # define CONFIG_SYS_AUTOLOAD "no" # endif # endif # define CONFIG_NET_RETRY_COUNT 20 #endif /* * Misc Settings */ #define CONFIG_LZMA #endif