/* * Copyright (C) Matrix Vision GmbH 2008 * * Matrix Vision mvBlueLYNX-M7 configuration file * based on Freescale's MPC8349ITX. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H #include /* * High Level Configuration Options */ #define CONFIG_E300 1 #define CONFIG_MPC83XX 1 #define CONFIG_MPC834X 1 #define CONFIG_MPC8343 1 #define CFG_IMMR 0xE0000000 #define CONFIG_PCI #define CONFIG_83XX_GENERIC_PCI #define CONFIG_PCI_SKIP_HOST_BRIDGE #define CONFIG_HARD_I2C #define CONFIG_TSEC_ENET #define CONFIG_MPC8XXX_SPI #define CONFIG_HARD_SPI #define MVBLM7_MMC_CS 0x04000000 /* I2C */ #undef CONFIG_SOFT_I2C #define CONFIG_FSL_I2C #define CONFIG_I2C_MULTI_BUS #define CONFIG_I2C_CMD_TREE #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 #define CFG_I2C_SPEED 100000 #define CFG_I2C_SLAVE 0x7F /* * DDR Setup */ #define CFG_DDR_BASE 0x00000000 #define CFG_SDRAM_BASE CFG_DDR_BASE #define CFG_DDR_SDRAM_BASE CFG_DDR_BASE #define CFG_83XX_DDR_USES_CS0 1 #define CFG_MEMTEST_START (60<<20) #define CFG_MEMTEST_END (70<<20) #define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 #define CFG_DDR_SIZE 256 /* HC, 75Ohm, DDR-II, DRQ */ #define CFG_DDRCDR 0x80000001 /* EN, ODT_WR, 3BA, 14row, 10col */ #define CFG_DDR_CS0_CONFIG 0x80014102 #define CFG_DDR_CS1_CONFIG 0x0 #define CFG_DDR_CS2_CONFIG 0x0 #define CFG_DDR_CS3_CONFIG 0x0 #define CFG_DDR_CS0_BNDS 0x0000000f #define CFG_DDR_CS1_BNDS 0x0 #define CFG_DDR_CS2_BNDS 0x0 #define CFG_DDR_CS3_BNDS 0x0 #define CFG_DDR_CLK_CNTL 0x02000000 #define CFG_DDR_TIMING_0 0x00260802 #define CFG_DDR_TIMING_1 0x2625b221 #define CFG_DDR_TIMING_2 0x1f9820c7 #define CFG_DDR_TIMING_3 0x00000000 /* ~MEM_EN, SREN, DDR-II, 32_BE */ #define CFG_DDR_SDRAM_CFG 0x43080000 #define CFG_DDR_SDRAM_CFG2 0x00401000 #define CFG_DDR_INTERVAL 0x04060100 #define CFG_DDR_MODE 0x078e0232 /* Flash */ #define CFG_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CFG_FLASH_BASE 0xFF800000 #define CFG_FLASH_SIZE 8 #define CFG_FLASH_SIZE_SHIFT 3 #define CFG_FLASH_EMPTY_INFO #define CFG_FLASH_ERASE_TOUT 60000 #define CFG_FLASH_WRITE_TOUT 500 #define CFG_MAX_FLASH_BANKS 1 #define CFG_MAX_FLASH_SECT 256 #define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V) #define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS|\ OR_GPCM_SCY_15 | OR_GPCM_TRLX | OR_GPCM_EHTR | \ OR_GPCM_EAD) #define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE #define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT)) /* * U-Boot memory configuration */ #define CFG_MONITOR_BASE TEXT_BASE #undef CFG_RAMBOOT #define CONFIG_L1_INIT_RAM #define CFG_INIT_RAM_LOCK #define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ #define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ #define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ #define CFG_MONITOR_LEN (512 * 1024) #define CFG_MALLOC_LEN (512 * 1024) /* * Local Bus LCRR and LBCR regs * LCRR: DLL bypass, Clock divider is 4 * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ #define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) #define CFG_LBC_LBCR 0x00000000 /* LB sdram refresh timer, about 6us */ #define CFG_LBC_LSRT 0x32000000 /* LB refresh timer prescal, 266MHz/32*/ #define CFG_LBC_MRTPR 0x20000000 /* * Serial Port */ #define CONFIG_CONS_INDEX 1 #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CFG_NS16550 #define CFG_NS16550_SERIAL #define CFG_NS16550_REG_SIZE 1 #define CFG_NS16550_CLK get_bus_freq(0) #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} #define CONFIG_CONSOLE ttyS0 #define CONFIG_BAUDRATE 115200 #define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) #define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 #define MV_DTB_NAME "mvblm7.dtb" /* * PCI */ #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE #define CFG_PCI1_MEM_SIZE 0x10000000 #define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE) #define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE #define CFG_PCI1_MMIO_SIZE 0x10000000 #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xE2000000 #define CFG_PCI1_IO_SIZE 0x01000000 #define _IO_BASE 0x00000000 #define CONFIG_NET_MULTI 1 #define CONFIG_NET_RETRY_COUNT 3 #define PCI_66M #define CONFIG_83XX_CLKIN 66666667 #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW /* TSEC */ #define CONFIG_GMII #define CFG_VSC8601_SKEWFIX #define CFG_VSC8601_SKEW_TX 3 #define CFG_VSC8601_SKEW_RX 3 #define CONFIG_TSEC1 #define CONFIG_TSEC2 #define CONFIG_HAS_ETH0 #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_FEC1_PHY_NORXERR #define CFG_TSEC1_OFFSET 0x24000 #define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) #define TSEC1_PHY_ADDR 0x10 #define TSEC1_PHYIDX 0 #define TSEC1_FLAGS (TSEC_GIGABIT|TSEC_REDUCED) #define CONFIG_HAS_ETH1 #define CONFIG_TSEC2_NAME "TSEC1" #define CONFIG_FEC2_PHY_NORXERR #define CFG_TSEC2_OFFSET 0x25000 #define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) #define TSEC2_PHY_ADDR 0x11 #define TSEC2_PHYIDX 0 #define TSEC2_FLAGS (TSEC_GIGABIT|TSEC_REDUCED) #define CONFIG_ETHPRIME "TSEC0" #define CONFIG_BOOTP_VENDOREX #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_NTPSERVER #define CONFIG_BOOTP_RANDOM_DELAY #define CONFIG_BOOTP_SEND_HOSTNAME /* USB */ #define CONFIG_HAS_FSL_DR_USB /* * Environment */ #undef CFG_FLASH_PROTECTION #define CONFIG_ENV_OVERWRITE #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_ADDR 0xFF800000 #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_SECT_SIZE 0x2000 #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE #define CONFIG_LOADS_ECHO #define CFG_LOADS_BAUD_CHANGE /* * Command line configuration. */ #include #define CONFIG_CMD_CACHE #define CONFIG_CMD_IRQ #define CONFIG_CMD_NET #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_SDRAM #define CONFIG_CMD_PCI #define CONFIG_CMD_I2C #define CONFIG_CMD_FPGA #undef CONFIG_WATCHDOG /* * Miscellaneous configurable options */ #define CFG_LONGHELP #define CONFIG_CMDLINE_EDITING #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " /* default load address */ #define CFG_LOAD_ADDR 0x2000000 /* default location for tftp and bootm */ #define CONFIG_LOADADDR 0x200000 #define CFG_PROMPT "mvBL-M7> " #define CFG_CBSIZE 256 #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) #define CFG_MAXARGS 16 #define CFG_BARGSIZE CFG_CBSIZE #define CFG_HZ 1000 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ #define CFG_HRCW_LOW 0x0 #define CFG_HRCW_HIGH 0x0 /* * System performance */ #define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ #define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ #define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ #define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ /* clocking */ #define CFG_SCCR_ENCCM 0 #define CFG_SCCR_USBMPHCM 0 #define CFG_SCCR_USBDRCM 2 #define CFG_SCCR_TSEC1CM 1 #define CFG_SCCR_TSEC2CM 1 #define CFG_SICRH 0x1fff8003 #define CFG_SICRL (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0) #define CFG_HID0_INIT 0x000000000 #define CFG_HID0_FINAL CFG_HID0_INIT #define CFG_HID2 HID2_HBE #define CONFIG_HIGH_BATS 1 /* DDR */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) /* PCI */ #define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) #define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\ BATL_GUARDEDSTORAGE) #define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) /* no PCI2 */ #define CFG_IBAT3L 0 #define CFG_IBAT3U 0 #define CFG_IBAT4L 0 #define CFG_IBAT4U 0 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ #define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | \ BATL_GUARDEDSTORAGE) #define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) /* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */ #define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) #define CFG_IBAT7L 0 #define CFG_IBAT7U 0 #define CFG_DBAT0L CFG_IBAT0L #define CFG_DBAT0U CFG_IBAT0U #define CFG_DBAT1L CFG_IBAT1L #define CFG_DBAT1U CFG_IBAT1U #define CFG_DBAT2L CFG_IBAT2L #define CFG_DBAT2U CFG_IBAT2U #define CFG_DBAT3L CFG_IBAT3L #define CFG_DBAT3U CFG_IBAT3U #define CFG_DBAT4L CFG_IBAT4L #define CFG_DBAT4U CFG_IBAT4U #define CFG_DBAT5L CFG_IBAT5L #define CFG_DBAT5U CFG_IBAT5U #define CFG_DBAT6L CFG_IBAT6L #define CFG_DBAT6U CFG_IBAT6U #define CFG_DBAT7L CFG_IBAT7L #define CFG_DBAT7U CFG_IBAT7U /* * Internal Definitions * * Boot Flags */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ /* * Environment Configuration */ #define CONFIG_ENV_OVERWRITE #define CONFIG_NETDEV eth0 /* Default path and filenames */ #define CONFIG_BOOTDELAY 5 #define CONFIG_AUTOBOOT_KEYED #define CONFIG_AUTOBOOT_STOP_STR "s" #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_RESET_TO_RETRY 1000 #define MV_CI mvBL-M7 #define MV_VCI mvBL-M7 #define MV_FPGA_DATA 0xfff80000 #define MV_FPGA_SIZE 0x00076ca2 #define MV_KERNEL_ADDR 0xff810000 #define MV_INITRD_ADDR 0xffb00000 #define MV_AUTOSCR_ADDR 0xff804000 #define MV_AUTOSCR_ADDR2 0xff806000 #define MV_DTB_ADDR 0xff808000 #define MV_INITRD_LENGTH 0x00400000 #define CONFIG_SHOW_BOOT_PROGRESS 1 #define MV_KERNEL_ADDR_RAM 0x00100000 #define MV_DTB_ADDR_RAM 0x00600000 #define MV_INITRD_ADDR_RAM 0x01000000 #define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \ then autoscr ${autoscr_addr}; \ else autoscr ${autoscr_addr2}; \ fi;" #define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs" #define CONFIG_EXTRA_ENV_SETTINGS \ "console_nr=0\0" \ "baudrate=" MK_STR(CONFIG_BAUDRATE) "\0" \ "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" \ "fpga=0\0" \ "fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \ "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \ "autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0" \ "autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0" \ "mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \ "mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \ "mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \ "mv_initrd_addr_ram=" MK_STR(MV_INITRD_ADDR_RAM) "\0" \ "mv_initrd_length=" MK_STR(MV_INITRD_LENGTH) "\0" \ "mv_dtb_addr=" MK_STR(MV_DTB_ADDR) "\0" \ "mv_dtb_addr_ram=" MK_STR(MV_DTB_ADDR_RAM) "\0" \ "dtb_name=" MK_STR(MV_DTB_NAME) "\0" \ "mv_version=" U_BOOT_VERSION "\0" \ "dhcp_client_id=" MK_STR(MV_CI) "\0" \ "dhcp_vendor-class-identifier=" MK_STR(MV_VCI) "\0" \ "netretry=no\0" \ "use_static_ipaddr=no\0" \ "static_ipaddr=192.168.90.10\0" \ "static_netmask=255.255.255.0\0" \ "static_gateway=0.0.0.0\0" \ "initrd_name=uInitrd.mvblm7-xenorfs\0" \ "zcip=no\0" \ "netboot=yes\0" \ "mvtest=Ff\0" \ "tried_bootfromflash=no\0" \ "tried_bootfromnet=no\0" \ "bootfile=mvblm72625.boot\0" \ "use_dhcp=yes\0" \ "gev_start=yes\0" \ "mvbcdma_debug=0\0" \ "mvbcia_debug=0\0" \ "propdev_debug=0\0" \ "gevss_debug=0\0" \ "watchdog=0\0" \ "usb_dr_mode=host\0" \ "sensor_cnt=2\0" \ "" #define CONFIG_FPGA_COUNT 1 #define CONFIG_FPGA CFG_ALTERA_CYCLON2 #define CONFIG_FPGA_ALTERA #define CONFIG_FPGA_CYCLON2 #endif