/* * * BRIEF MODULE DESCRIPTION * Include file for Alchemy Semiconductor's Au1k CPU. * * Copyright 2000,2001 MontaVista Software Inc. * Author: MontaVista Software, Inc. * ppopov@mvista.com or source@mvista.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ /* * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp */ #ifndef _AU1X00_H_ #define _AU1X00_H_ #ifndef __ASSEMBLY__ /* cpu pipeline flush */ void static inline au_sync(void) { __asm__ volatile ("sync"); } void static inline au_sync_udelay(int us) { __asm__ volatile ("sync"); udelay(us); } void static inline au_writeb(u8 val, int reg) { *(volatile u8 *)(reg) = val; } void static inline au_writew(u16 val, int reg) { *(volatile u16 *)(reg) = val; } void static inline au_writel(u32 val, int reg) { *(volatile u32 *)(reg) = val; } static inline u8 au_readb(unsigned long port) { return (*(volatile u8 *)port); } static inline u16 au_readw(unsigned long port) { return (*(volatile u16 *)port); } static inline u32 au_readl(unsigned long port) { return (*(volatile u32 *)port); } /* These next three functions should be a generic part of the MIPS * kernel (with the 'au_' removed from the name) and selected for * processors that support the instructions. * Taken from PPC tree. -- Dan */ /* Return the bit position of the most significant 1 bit in a word */ static __inline__ int __ilog2(unsigned int x) { int lz; asm volatile ( ".set\tnoreorder\n\t" ".set\tnoat\n\t" ".set\tmips32\n\t" "clz\t%0,%1\n\t" ".set\tmips0\n\t" ".set\tat\n\t" ".set\treorder" : "=r" (lz) : "r" (x)); return 31 - lz; } static __inline__ int au_ffz(unsigned int x) { if ((x = ~x) == 0) return 32; return __ilog2(x & -x); } /* * ffs: find first bit set. This is defined the same way as * the libc and compiler builtin ffs routines, therefore * differs in spirit from the above ffz (man ffs). */ static __inline__ int au_ffs(int x) { return __ilog2(x & -x) + 1; } #define gpio_set(Value) outl(Value, SYS_OUTPUTSET) #define gpio_clear(Value) outl(Value, SYS_OUTPUTCLR) #define gpio_read() inl(SYS_PINSTATERD) #define gpio_tristate(Value) outl(Value, SYS_TRIOUTCLR) #endif /* !ASSEMBLY */ #ifdef CONFIG_PM /* no CP0 timer irq */ #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) #else #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) #endif #define CP0_IWATCHLO $18,1 #define CP0_DEBUG $23 /* SDRAM Controller */ #ifdef CONFIG_AU1550 #define MEM_SDMODE0 0xB4000800 #define MEM_SDMODE1 0xB4000808 #define MEM_SDMODE2 0xB4000810 #define MEM_SDADDR0 0xB4000820 #define MEM_SDADDR1 0xB4000828 #define MEM_SDADDR2 0xB4000830 #define MEM_SDCONFIGA 0xB4000840 #define MEM_SDCONFIGB 0xB4000848 #define MEM_SDPRECMD 0xB40008c0 #define MEM_SDAUTOREF 0xB40008c8 #define MEM_SDWRMD0 0xB4000880 #define MEM_SDWRMD1 0xB4000888 #define MEM_SDWRMD2 0xB4000890 #else /* CONFIG_AU1550 */ #define MEM_SDMODE0 0xB4000000 #define MEM_SDMODE1 0xB4000004 #define MEM_SDMODE2 0xB4000008 #define MEM_SDADDR0 0xB400000C #define MEM_SDADDR1 0xB4000010 #define MEM_SDADDR2 0xB4000014 #define MEM_SDREFCFG 0xB4000018 #define MEM_SDPRECMD 0xB400001C #define MEM_SDAUTOREF 0xB4000020 #define MEM_SDWRMD0 0xB4000024 #define MEM_SDWRMD1 0xB4000028 #define MEM_SDWRMD2 0xB400002C #endif /* CONFIG_AU1550 */ #define MEM_SDSLEEP 0xB4000030 #define MEM_SDSMCKE 0xB4000034 /* Static Bus Controller */ #define MEM_STCFG0 0xB4001000 #define MEM_STTIME0 0xB4001004 #define MEM_STADDR0 0xB4001008 #define MEM_STCFG1 0xB4001010 #define MEM_STTIME1 0xB4001014 #define MEM_STADDR1 0xB4001018 #define MEM_STCFG2 0xB4001020 #define MEM_STTIME2 0xB4001024 #define MEM_STADDR2 0xB4001028 #define MEM_STCFG3 0xB4001030 #define MEM_STTIME3 0xB4001034 #define MEM_STADDR3 0xB4001038 /* Interrupt Controller 0 */ #define IC0_CFG0RD 0xB0400040 #define IC0_CFG0SET 0xB0400040 #define IC0_CFG0CLR 0xB0400044 #define IC0_CFG1RD 0xB0400048 #define IC0_CFG1SET 0xB0400048 #define IC0_CFG1CLR 0xB040004C #define IC0_CFG2RD 0xB0400050 #define IC0_CFG2SET 0xB0400050 #define IC0_CFG2CLR 0xB0400054 #define IC0_REQ0INT 0xB0400054 #define IC0_SRCRD 0xB0400058 #define IC0_SRCSET 0xB0400058 #define IC0_SRCCLR 0xB040005C #define IC0_REQ1INT 0xB040005C #define IC0_ASSIGNRD 0xB0400060 #define IC0_ASSIGNSET 0xB0400060 #define IC0_ASSIGNCLR 0xB0400064 #define IC0_WAKERD 0xB0400068 #define IC0_WAKESET 0xB0400068 #define IC0_WAKECLR 0xB040006C #define IC0_MASKRD 0xB0400070 #define IC0_MASKSET 0xB0400070 #define IC0_MASKCLR 0xB0400074 #define IC0_RISINGRD 0xB0400078 #define IC0_RISINGCLR 0xB0400078 #define IC0_FALLINGRD 0xB040007C #define IC0_FALLINGCLR 0xB040007C #define IC0_TESTBIT 0xB0400080 /* Interrupt Controller 1 */ #define IC1_CFG0RD 0xB1800040 #define IC1_CFG0SET 0xB1800040 #define IC1_CFG0CLR 0xB1800044 #define IC1_CFG1RD 0xB1800048 #define IC1_CFG1SET 0xB1800048 #define IC1_CFG1CLR 0xB180004C #define IC1_CFG2RD 0xB1800050 #define IC1_CFG2SET 0xB1800050 #define IC1_CFG2CLR 0xB1800054 #define IC1_REQ0INT 0xB1800054 #define IC1_SRCRD 0xB1800058 #define IC1_SRCSET 0xB1800058 #define IC1_SRCCLR 0xB180005C #define IC1_REQ1INT 0xB180005C #define IC1_ASSIGNRD 0xB1800060 #define IC1_ASSIGNSET 0xB1800060 #define IC1_ASSIGNCLR 0xB1800064 #define IC1_WAKERD 0xB1800068 #define IC1_WAKESET 0xB1800068 #define IC1_WAKECLR 0xB180006C #define IC1_MASKRD 0xB1800070 #define IC1_MASKSET 0xB1800070 #define IC1_MASKCLR 0xB1800074 #define IC1_RISINGRD 0xB1800078 #define IC1_RISINGCLR 0xB1800078 #define IC1_FALLINGRD 0xB180007C #define IC1_FALLINGCLR 0xB180007C #define IC1_TESTBIT 0xB1800080 /* Interrupt Configuration Modes */ #define INTC_INT_DISABLED 0 #define INTC_INT_RISE_EDGE 0x1 #define INTC_INT_FALL_EDGE 0x2 #define INTC_INT_RISE_AND_FALL_EDGE 0x3 #define INTC_INT_HIGH_LEVEL 0x5 #define INTC_INT_LOW_LEVEL 0x6 #define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 /* Interrupt Numbers */ #define AU1X00_UART0_INT 0 #define AU1000_UART1_INT 1 /* au1000 */ #define AU1000_UART2_INT 2 /* au1000 */ #define AU1500_PCI_INTA 1 /* au1500 */ #define AU1500_PCI_INTB 2 /* au1500 */ #define AU1X00_UART3_INT 3 #define AU1000_SSI0_INT 4 /* au1000 */ #define AU1000_SSI1_INT 5 /* au1000 */ #define AU1500_PCI_INTC 4 /* au1500 */ #define AU1500_PCI_INTD 5 /* au1500 */ #define AU1X00_DMA_INT_BASE 6 #define AU1X00_TOY_INT 14 #define AU1X00_TOY_MATCH0_INT 15 #define AU1X00_TOY_MATCH1_INT 16 #define AU1X00_TOY_MATCH2_INT 17 #define AU1X00_RTC_INT 18 #define AU1X00_RTC_MATCH0_INT 19 #define AU1X00_RTC_MATCH1_INT 20 #define AU1X00_RTC_MATCH2_INT 21 #define AU1000_IRDA_TX_INT 22 /* au1000 */ #define AU1000_IRDA_RX_INT 23 /* au1000 */ #define AU1X00_USB_DEV_REQ_INT 24 #define AU1X00_USB_DEV_SUS_INT 25 #define AU1X00_USB_HOST_INT 26 #define AU1X00_ACSYNC_INT 27 #define AU1X00_MAC0_DMA_INT 28 #define AU1X00_MAC1_DMA_INT 29 #define AU1X00_ETH0_IRQ AU1X00_MAC0_DMA_INT #define AU1X00_ETH1_IRQ AU1X00_MAC1_DMA_INT #define AU1000_I2S_UO_INT 30 /* au1000 */ #define AU1X00_AC97C_INT 31 #define AU1X00_LAST_INTC0_INT AU1X00_AC97C_INT #define AU1X00_GPIO_0 32 #define AU1X00_GPIO_1 33 #define AU1X00_GPIO_2 34 #define AU1X00_GPIO_3 35 #define AU1X00_GPIO_4 36 #define AU1X00_GPIO_5 37 #define AU1X00_GPIO_6 38 #define AU1X00_GPIO_7 39 #define AU1X00_GPIO_8 40 #define AU1X00_GPIO_9 41 #define AU1X00_GPIO_10 42 #define AU1X00_GPIO_11 43 #define AU1X00_GPIO_12 44 #define AU1X00_GPIO_13 45 #define AU1X00_GPIO_14 46 #define AU1X00_GPIO_15 47 /* Au1000 only */ #define AU1000_GPIO_16 48 #define AU1000_GPIO_17 49 #define AU1000_GPIO_18 50 #define AU1000_GPIO_19 51 #define AU1000_GPIO_20 52 #define AU1000_GPIO_21 53 #define AU1000_GPIO_22 54 #define AU1000_GPIO_23 55 #define AU1000_GPIO_24 56 #define AU1000_GPIO_25 57 #define AU1000_GPIO_26 58 #define AU1000_GPIO_27 59 #define AU1000_GPIO_28 60 #define AU1000_GPIO_29 61 #define AU1000_GPIO_30 62 #define AU1000_GPIO_31 63 /* Au1500 only */ #define AU1500_GPIO_200 48 #define AU1500_GPIO_201 49 #define AU1500_GPIO_202 50 #define AU1500_GPIO_203 51 #define AU1500_GPIO_20 52 #define AU1500_GPIO_204 53 #define AU1500_GPIO_205 54 #define AU1500_GPIO_23 55 #define AU1500_GPIO_24 56 #define AU1500_GPIO_25 57 #define AU1500_GPIO_26 58 #define AU1500_GPIO_27 59 #define AU1500_GPIO_28 60 #define AU1500_GPIO_206 61 #define AU1500_GPIO_207 62 #define AU1500_GPIO_208_215 63 #define AU1X00_MAX_INTR 63 #define AU1100_SD 2 #define AU1100_GPIO_208_215 29 /* REDEFINE SECONDARY GPIO BLOCK INTO IC1 CONTROLLER HERE */ /* Programmable Counters 0 and 1 */ #define SYS_BASE 0xB1900000 #define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) #define SYS_CNTRL_E1S (1<<23) #define SYS_CNTRL_T1S (1<<20) #define SYS_CNTRL_M21 (1<<19) #define SYS_CNTRL_M11 (1<<18) #define SYS_CNTRL_M01 (1<<17) #define SYS_CNTRL_C1S (1<<16) #define SYS_CNTRL_BP (1<<14) #define SYS_CNTRL_EN1 (1<<13) #define SYS_CNTRL_BT1 (1<<12) #define SYS_CNTRL_EN0 (1<<11) #define SYS_CNTRL_BT0 (1<<10) #define SYS_CNTRL_E0 (1<<8) #define SYS_CNTRL_E0S (1<<7) #define SYS_CNTRL_32S (1<<5) #define SYS_CNTRL_T0S (1<<4) #define SYS_CNTRL_M20 (1<<3) #define SYS_CNTRL_M10 (1<<2) #define SYS_CNTRL_M00 (1<<1) #define SYS_CNTRL_C0S (1<<0) /* Programmable Counter 0 Registers */ #define SYS_TOYTRIM (SYS_BASE + 0) #define SYS_TOYWRITE (SYS_BASE + 4) #define SYS_TOYMATCH0 (SYS_BASE + 8) #define SYS_TOYMATCH1 (SYS_BASE + 0xC) #define SYS_TOYMATCH2 (SYS_BASE + 0x10) #define SYS_TOYREAD (SYS_BASE + 0x40) /* Programmable Counter 1 Registers */ #define SYS_RTCTRIM (SYS_BASE + 0x44) #define SYS_RTCWRITE (SYS_BASE + 0x48) #define SYS_RTCMATCH0 (SYS_BASE + 0x4C) #define SYS_RTCMATCH1 (SYS_BASE + 0x50) #define SYS_RTCMATCH2 (SYS_BASE + 0x54) #define SYS_RTCREAD (SYS_BASE + 0x58) /* I2S Controller */ #define I2S_DATA 0xB1000000 #define I2S_DATA_MASK (0xffffff) #define I2S_CONFIG 0xB1000004 #define I2S_CONFIG_XU (1<<25) #define I2S_CONFIG_XO (1<<24) #define I2S_CONFIG_RU (1<<23) #define I2S_CONFIG_RO (1<<22) #define I2S_CONFIG_TR (1<<21) #define I2S_CONFIG_TE (1<<20) #define I2S_CONFIG_TF (1<<19) #define I2S_CONFIG_RR (1<<18) #define I2S_CONFIG_RE (1<<17) #define I2S_CONFIG_RF (1<<16) #define I2S_CONFIG_PD (1<<11) #define I2S_CONFIG_LB (1<<10) #define I2S_CONFIG_IC (1<<9) #define I2S_CONFIG_FM_BIT 7 #define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) #define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) #define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) #define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) #define I2S_CONFIG_TN (1<<6) #define I2S_CONFIG_RN (1<<5) #define I2S_CONFIG_SZ_BIT 0 #define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) #define I2S_CONTROL 0xB1000008 #define I2S_CONTROL_D (1<<1) #define I2S_CONTROL_CE (1<<0) /* USB Host Controller */ /* We pass USB_OHCI_BASE to ioremap, so it needs to be a physical address */ #define USB_OHCI_BASE 0x10100000 #define USB_OHCI_LEN 0x00100000 #define USB_HOST_CONFIG 0xB017fffc /* USB Device Controller */ #define USBD_EP0RD 0xB0200000 #define USBD_EP0WR 0xB0200004 #define USBD_EP2WR 0xB0200008 #define USBD_EP3WR 0xB020000C #define USBD_EP4RD 0xB0200010 #define USBD_EP5RD 0xB0200014 #define USBD_INTEN 0xB0200018 #define USBD_INTSTAT 0xB020001C #define USBDEV_INT_SOF (1<<12) #define USBDEV_INT_HF_BIT 6 #define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) #define USBDEV_INT_CMPLT_BIT 0 #define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) #define USBD_CONFIG 0xB0200020 #define USBD_EP0CS 0xB0200024 #define USBD_EP2CS 0xB0200028 #define USBD_EP3CS 0xB020002C #define USBD_EP4CS 0xB0200030 #define USBD_EP5CS 0xB0200034 #define USBDEV_CS_SU (1<<14) #define USBDEV_CS_NAK (1<<13) #define USBDEV_CS_ACK (1<<12) #define USBDEV_CS_BUSY (1<<11) #define USBDEV_CS_TSIZE_BIT 1 #define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) #define USBDEV_CS_STALL (1<<0) #define USBD_EP0RDSTAT 0xB0200040 #define USBD_EP0WRSTAT 0xB0200044 #define USBD_EP2WRSTAT 0xB0200048 #define USBD_EP3WRSTAT 0xB020004C #define USBD_EP4RDSTAT 0xB0200050 #define USBD_EP5RDSTAT 0xB0200054 #define USBDEV_FSTAT_FLUSH (1<<6) #define USBDEV_FSTAT_UF (1<<5) #define USBDEV_FSTAT_OF (1<<4) #define USBDEV_FSTAT_FCNT_BIT 0 #define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) #define USBD_ENABLE 0xB0200058 #define USBDEV_ENABLE (1<<1) #define USBDEV_CE (1<<0) /* Ethernet Controllers */ #define AU1000_ETH0_BASE 0xB0500000 #define AU1000_ETH1_BASE 0xB0510000 #define AU1500_ETH0_BASE 0xB1500000 #define AU1500_ETH1_BASE 0xB1510000 #define AU1100_ETH0_BASE 0xB0500000 #define AU1550_ETH0_BASE 0xB0500000 #define AU1550_ETH1_BASE 0xB0510000 /* 4 byte offsets from AU1000_ETH_BASE */ #define MAC_CONTROL 0x0 #define MAC_RX_ENABLE (1<<2) #define MAC_TX_ENABLE (1<<3) #define MAC_DEF_CHECK (1<<5) #define MAC_SET_BL(X) (((X)&0x3)<<6) #define MAC_AUTO_PAD (1<<8) #define MAC_DISABLE_RETRY (1<<10) #define MAC_DISABLE_BCAST (1<<11) #define MAC_LATE_COL (1<<12) #define MAC_HASH_MODE (1<<13) #define MAC_HASH_ONLY (1<<15) #define MAC_PASS_ALL (1<<16) #define MAC_INVERSE_FILTER (1<<17) #define MAC_PROMISCUOUS (1<<18) #define MAC_PASS_ALL_MULTI (1<<19) #define MAC_FULL_DUPLEX (1<<20) #define MAC_NORMAL_MODE 0 #define MAC_INT_LOOPBACK (1<<21) #define MAC_EXT_LOOPBACK (1<<22) #define MAC_DISABLE_RX_OWN (1<<23) #define MAC_BIG_ENDIAN (1<<30) #define MAC_RX_ALL (1<<31) #define MAC_ADDRESS_HIGH 0x4 #define MAC_ADDRESS_LOW 0x8 #define MAC_MCAST_HIGH 0xC #define MAC_MCAST_LOW 0x10 #define MAC_MII_CNTRL 0x14 #define MAC_MII_BUSY (1<<0) #define MAC_MII_READ 0 #define MAC_MII_WRITE (1<<1) #define MAC_SET_MII_SELECT_REG(X) (((X)&0x1f)<<6) #define MAC_SET_MII_SELECT_PHY(X) (((X)&0x1f)<<11) #define MAC_MII_DATA 0x18 #define MAC_FLOW_CNTRL 0x1C #define MAC_FLOW_CNTRL_BUSY (1<<0) #define MAC_FLOW_CNTRL_ENABLE (1<<1) #define MAC_PASS_CONTROL (1<<2) #define MAC_SET_PAUSE(X) (((X)&0xffff)<<16) #define MAC_VLAN1_TAG 0x20 #define MAC_VLAN2_TAG 0x24 /* Ethernet Controller Enable */ #define AU1000_MAC0_ENABLE 0xB0520000 #define AU1000_MAC1_ENABLE 0xB0520004 #define AU1500_MAC0_ENABLE 0xB1520000 #define AU1500_MAC1_ENABLE 0xB1520004 #define AU1100_MAC0_ENABLE 0xB0520000 #define AU1550_MAC0_ENABLE 0xB0520000 #define AU1550_MAC1_ENABLE 0xB0520004 #define MAC_EN_CLOCK_ENABLE (1<<0) #define MAC_EN_RESET0 (1<<1) #define MAC_EN_TOSS (0<<2) #define MAC_EN_CACHEABLE (1<<3) #define MAC_EN_RESET1 (1<<4) #define MAC_EN_RESET2 (1<<5) #define MAC_DMA_RESET (1<<6) /* Ethernet Controller DMA Channels */ #define MAC0_TX_DMA_ADDR 0xB4004000 #define MAC1_TX_DMA_ADDR 0xB4004200 /* offsets from MAC_TX_RING_ADDR address */ #define MAC_TX_BUFF0_STATUS 0x0 #define TX_FRAME_ABORTED (1<<0) #define TX_JAB_TIMEOUT (1<<1) #define TX_NO_CARRIER (1<<2) #define TX_LOSS_CARRIER (1<<3) #define TX_EXC_DEF (1<<4) #define TX_LATE_COLL_ABORT (1<<5) #define TX_EXC_COLL (1<<6) #define TX_UNDERRUN (1<<7) #define TX_DEFERRED (1<<8) #define TX_LATE_COLL (1<<9) #define TX_COLL_CNT_MASK (0xF<<10) #define TX_PKT_RETRY (1<<31) #define MAC_TX_BUFF0_ADDR 0x4 #define TX_DMA_ENABLE (1<<0) #define TX_T_DONE (1<<1) #define TX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) #define MAC_TX_BUFF0_LEN 0x8 #define MAC_TX_BUFF1_STATUS 0x10 #define MAC_TX_BUFF1_ADDR 0x14 #define MAC_TX_BUFF1_LEN 0x18 #define MAC_TX_BUFF2_STATUS 0x20 #define MAC_TX_BUFF2_ADDR 0x24 #define MAC_TX_BUFF2_LEN 0x28 #define MAC_TX_BUFF3_STATUS 0x30 #define MAC_TX_BUFF3_ADDR 0x34 #define MAC_TX_BUFF3_LEN 0x38 #define MAC0_RX_DMA_ADDR 0xB4004100 #define MAC1_RX_DMA_ADDR 0xB4004300 /* offsets from MAC_RX_RING_ADDR */ #define MAC_RX_BUFF0_STATUS 0x0 #define RX_FRAME_LEN_MASK 0x3fff #define RX_WDOG_TIMER (1<<14) #define RX_RUNT (1<<15) #define RX_OVERLEN (1<<16) #define RX_COLL (1<<17) #define RX_ETHER (1<<18) #define RX_MII_ERROR (1<<19) #define RX_DRIBBLING (1<<20) #define RX_CRC_ERROR (1<<21) #define RX_VLAN1 (1<<22) #define RX_VLAN2 (1<<23) #define RX_LEN_ERROR (1<<24) #define RX_CNTRL_FRAME (1<<25) #define RX_U_CNTRL_FRAME (1<<26) #define RX_MCAST_FRAME (1<<27) #define RX_BCAST_FRAME (1<<28) #define RX_FILTER_FAIL (1<<29) #define RX_PACKET_FILTER (1<<30) #define RX_MISSED_FRAME (1<<31) #define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) #define MAC_RX_BUFF0_ADDR 0x4 #define RX_DMA_ENABLE (1<<0) #define RX_T_DONE (1<<1) #define RX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) #define RX_SET_BUFF_ADDR(X) ((X)&0xffffffc0) #define MAC_RX_BUFF1_STATUS 0x10 #define MAC_RX_BUFF1_ADDR 0x14 #define MAC_RX_BUFF2_STATUS 0x20 #define MAC_RX_BUFF2_ADDR 0x24 #define MAC_RX_BUFF3_STATUS 0x30 #define MAC_RX_BUFF3_ADDR 0x34 /* UARTS 0-3 */ #define UART0_ADDR 0xB1100000 #define UART1_ADDR 0xB1200000 #define UART2_ADDR 0xB1300000 #define UART3_ADDR 0xB1400000 #define UART_BASE UART0_ADDR #define UART_DEBUG_BASE UART2_ADDR #define UART_RX 0 /* Receive buffer */ #define UART_TX 4 /* Transmit buffer */ #define UART_IER 8 /* Interrupt Enable Register */ #define UART_IIR 0xC /* Interrupt ID Register */ #define UART_FCR 0x10 /* FIFO Control Register */ #define UART_LCR 0x14 /* Line Control Register */ #define UART_MCR 0x18 /* Modem Control Register */ #define UART_LSR 0x1C /* Line Status Register */ #define UART_MSR 0x20 /* Modem Status Register */ #define UART_CLK 0x28 /* Baud Rate Clock Divider */ #define UART_ENABLE 0x100 /* Uart enable */ #define UART_EN_CE 1 /* Clock enable */ #define UART_EN_E 2 /* Enable */ #define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ #define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ #define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ #define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ #define UART_FCR_TRIGGER_MASK 0xF0 /* Mask for the FIFO trigger range */ #define UART_FCR_R_TRIGGER_1 0x00 /* Mask for receive trigger set at 1 */ #define UART_FCR_R_TRIGGER_4 0x40 /* Mask for receive trigger set at 4 */ #define UART_FCR_R_TRIGGER_8 0x80 /* Mask for receive trigger set at 8 */ #define UART_FCR_R_TRIGGER_14 0xA0 /* Mask for receive trigger set at 14 */ #define UART_FCR_T_TRIGGER_0 0x00 /* Mask for transmit trigger set at 0 */ #define UART_FCR_T_TRIGGER_4 0x10 /* Mask for transmit trigger set at 4 */ #define UART_FCR_T_TRIGGER_8 0x20 /* Mask for transmit trigger set at 8 */ #define UART_FCR_T_TRIGGER_12 0x30 /* Mask for transmit trigger set at 12 */ /* * These are the definitions for the Line Control Register */ #define UART_LCR_SBC 0x40 /* Set break control */ #define UART_LCR_SPAR 0x20 /* Stick parity (?) */ #define UART_LCR_EPAR 0x10 /* Even parity select */ #define UART_LCR_PARITY 0x08 /* Parity Enable */ #define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ #define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ #define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ #define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ #define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ /* * These are the definitions for the Line Status Register */ #define UART_LSR_TEMT 0x40 /* Transmitter empty */ #define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ #define UART_LSR_BI 0x10 /* Break interrupt indicator */ #define UART_LSR_FE 0x08 /* Frame error indicator */ #define UART_LSR_PE 0x04 /* Parity error indicator */ #define UART_LSR_OE 0x02 /* Overrun error indicator */ #define UART_LSR_DR 0x01 /* Receiver data ready */ /* * These are the definitions for the Interrupt Identification Register */ #define UART_IIR_NO_INT 0x01 /* No interrupts pending */ #define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ #define UART_IIR_MSI 0x00 /* Modem status interrupt */ #define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ #define UART_IIR_RDI 0x04 /* Receiver data interrupt */ #define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ /* * These are the definitions for the Interrupt Enable Register */ #define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ #define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ #define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ #define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ /* * These are the definitions for the Modem Control Register */ #define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ #define UART_MCR_OUT2 0x08 /* Out2 complement */ #define UART_MCR_OUT1 0x04 /* Out1 complement */ #define UART_MCR_RTS 0x02 /* RTS complement */ #define UART_MCR_DTR 0x01 /* DTR complement */ /* * These are the definitions for the Modem Status Register */ #define UART_MSR_DCD 0x80 /* Data Carrier Detect */ #define UART_MSR_RI 0x40 /* Ring Indicator */ #define UART_MSR_DSR 0x20 /* Data Set Ready */ #define UART_MSR_CTS 0x10 /* Clear to Send */ #define UART_MSR_DDCD 0x08 /* Delta DCD */ #define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ #define UART_MSR_DDSR 0x02 /* Delta DSR */ #define UART_MSR_DCTS 0x01 /* Delta CTS */ #define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ /* SSIO */ #define SSI0_STATUS 0xB1600000 #define SSI_STATUS_BF (1<<4) #define SSI_STATUS_OF (1<<3) #define SSI_STATUS_UF (1<<2) #define SSI_STATUS_D (1<<1) #define SSI_STATUS_B (1<<0) #define SSI0_INT 0xB1600004 #define SSI_INT_OI (1<<3) #define SSI_INT_UI (1<<2) #define SSI_INT_DI (1<<1) #define SSI0_INT_ENABLE 0xB1600008 #define SSI_INTE_OIE (1<<3) #define SSI_INTE_UIE (1<<2) #define SSI_INTE_DIE (1<<1) #define SSI0_CONFIG 0xB1600020 #define SSI_CONFIG_AO (1<<24) #define SSI_CONFIG_DO (1<<23) #define SSI_CONFIG_ALEN_BIT 20 #define SSI_CONFIG_ALEN_MASK (0x7<<20) #define SSI_CONFIG_DLEN_BIT 16 #define SSI_CONFIG_DLEN_MASK (0x7<<16) #define SSI_CONFIG_DD (1<<11) #define SSI_CONFIG_AD (1<<10) #define SSI_CONFIG_BM_BIT 8 #define SSI_CONFIG_BM_MASK (0x3<<8) #define SSI_CONFIG_CE (1<<7) #define SSI_CONFIG_DP (1<<6) #define SSI_CONFIG_DL (1<<5) #define SSI_CONFIG_EP (1<<4) #define SSI0_ADATA 0xB1600024 #define SSI_AD_D (1<<24) #define SSI_AD_ADDR_BIT 16 #define SSI_AD_ADDR_MASK (0xff<<16) #define SSI_AD_DATA_BIT 0 #define SSI_AD_DATA_MASK (0xfff<<0) #define SSI0_CLKDIV 0xB1600028 #define SSI0_CONTROL 0xB1600100 #define SSI_CONTROL_CD (1<<1) #define SSI_CONTROL_E (1<<0) /* SSI1 */ #define SSI1_STATUS 0xB1680000 #define SSI1_INT 0xB1680004 #define SSI1_INT_ENABLE 0xB1680008 #define SSI1_CONFIG 0xB1680020 #define SSI1_ADATA 0xB1680024 #define SSI1_CLKDIV 0xB1680028 #define SSI1_ENABLE 0xB1680100 /* * Register content definitions */ #define SSI_STATUS_BF (1<<4) #define SSI_STATUS_OF (1<<3) #define SSI_STATUS_UF (1<<2) #define SSI_STATUS_D (1<<1) #define SSI_STATUS_B (1<<0) /* SSI_INT */ #define SSI_INT_OI (1<<3) #define SSI_INT_UI (1<<2) #define SSI_INT_DI (1<<1) /* SSI_INTEN */ #define SSI_INTEN_OIE (1<<3) #define SSI_INTEN_UIE (1<<2) #define SSI_INTEN_DIE (1<<1) #define SSI_CONFIG_AO (1<<24) #define SSI_CONFIG_DO (1<<23) #define SSI_CONFIG_ALEN (7<<20) #define SSI_CONFIG_DLEN (15<<16) #define SSI_CONFIG_DD (1<<11) #define SSI_CONFIG_AD (1<<10) #define SSI_CONFIG_BM (3<<8) #define SSI_CONFIG_CE (1<<7) #define SSI_CONFIG_DP (1<<6) #define SSI_CONFIG_DL (1<<5) #define SSI_CONFIG_EP (1<<4) #define SSI_CONFIG_ALEN_N(N) ((N-1)<<20) #define SSI_CONFIG_DLEN_N(N) ((N-1)<<16) #define SSI_CONFIG_BM_HI (0<<8) #define SSI_CONFIG_BM_LO (1<<8) #define SSI_CONFIG_BM_CY (2<<8) #define SSI_ADATA_D (1<<24) #define SSI_ADATA_ADDR (0xFF<<16) #define SSI_ADATA_DATA (0x0FFF) #define SSI_ADATA_ADDR_N(N) (N<<16) #define SSI_ENABLE_CD (1<<1) #define SSI_ENABLE_E (1<<0) /* IrDA Controller */ #define IRDA_BASE 0xB0300000 #define IR_RING_PTR_STATUS (IRDA_BASE+0x00) #define IR_RING_BASE_ADDR_H (IRDA_BASE+0x04) #define IR_RING_BASE_ADDR_L (IRDA_BASE+0x08) #define IR_RING_SIZE (IRDA_BASE+0x0C) #define IR_RING_PROMPT (IRDA_BASE+0x10) #define IR_RING_ADDR_CMPR (IRDA_BASE+0x14) #define IR_INT_CLEAR (IRDA_BASE+0x18) #define IR_CONFIG_1 (IRDA_BASE+0x20) #define IR_RX_INVERT_LED (1<<0) #define IR_TX_INVERT_LED (1<<1) #define IR_ST (1<<2) #define IR_SF (1<<3) #define IR_SIR (1<<4) #define IR_MIR (1<<5) #define IR_FIR (1<<6) #define IR_16CRC (1<<7) #define IR_TD (1<<8) #define IR_RX_ALL (1<<9) #define IR_DMA_ENABLE (1<<10) #define IR_RX_ENABLE (1<<11) #define IR_TX_ENABLE (1<<12) #define IR_LOOPBACK (1<<14) #define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) #define IR_SIR_FLAGS (IRDA_BASE+0x24) #define IR_ENABLE (IRDA_BASE+0x28) #define IR_RX_STATUS (1<<9) #define IR_TX_STATUS (1<<10) #define IR_READ_PHY_CONFIG (IRDA_BASE+0x2C) #define IR_WRITE_PHY_CONFIG (IRDA_BASE+0x30) #define IR_MAX_PKT_LEN (IRDA_BASE+0x34) #define IR_RX_BYTE_CNT (IRDA_BASE+0x38) #define IR_CONFIG_2 (IRDA_BASE+0x3C) #define IR_MODE_INV (1<<0) #define IR_ONE_PIN (1<<1) #define IR_INTERFACE_CONFIG (IRDA_BASE+0x40) /* GPIO */ #define SYS_PINFUNC 0xB190002C #define SYS_PF_USB (1<<15) /* 2nd USB device/host */ #define SYS_PF_U3 (1<<14) /* GPIO23/U3TXD */ #define SYS_PF_U2 (1<<13) /* GPIO22/U2TXD */ #define SYS_PF_U1 (1<<12) /* GPIO21/U1TXD */ #define SYS_PF_SRC (1<<11) /* GPIO6/SROMCKE */ #define SYS_PF_CK5 (1<<10) /* GPIO3/CLK5 */ #define SYS_PF_CK4 (1<<9) /* GPIO2/CLK4 */ #define SYS_PF_IRF (1<<8) /* GPIO15/IRFIRSEL */ #define SYS_PF_UR3 (1<<7) /* GPIO[14:9]/UART3 */ #define SYS_PF_I2D (1<<6) /* GPIO8/I2SDI */ #define SYS_PF_I2S (1<<5) /* I2S/GPIO[29:31] */ #define SYS_PF_NI2 (1<<4) /* NI2/GPIO[24:28] */ #define SYS_PF_U0 (1<<3) /* U0TXD/GPIO20 */ #define SYS_PF_RD (1<<2) /* IRTXD/GPIO19 */ #define SYS_PF_A97 (1<<1) /* AC97/SSL1 */ #define SYS_PF_S0 (1<<0) /* SSI_0/GPIO[16:18] */ #define SYS_TRIOUTRD 0xB1900100 #define SYS_TRIOUTCLR 0xB1900100 #define SYS_OUTPUTRD 0xB1900108 #define SYS_OUTPUTSET 0xB1900108 #define SYS_OUTPUTCLR 0xB190010C #define SYS_PINSTATERD 0xB1900110 #define SYS_PININPUTEN 0xB1900110 /* GPIO2, Au1500 only */ #define GPIO2_BASE 0xB1700000 #define GPIO2_DIR (GPIO2_BASE + 0) #define GPIO2_DATA_EN (GPIO2_BASE + 8) #define GPIO2_PIN_STATE (GPIO2_BASE + 0xC) #define GPIO2_INT_ENABLE (GPIO2_BASE + 0x10) #define GPIO2_ENABLE (GPIO2_BASE + 0x14) /* Power Management */ #define SYS_SCRATCH0 0xB1900018 #define SYS_SCRATCH1 0xB190001C #define SYS_WAKEMSK 0xB1900034 #define SYS_ENDIAN 0xB1900038 #define SYS_POWERCTRL 0xB190003C #define SYS_WAKESRC 0xB190005C #define SYS_SLPPWR 0xB1900078 #define SYS_SLEEP 0xB190007C /* Clock Controller */ #define SYS_FREQCTRL0 0xB1900020 #define SYS_FC_FRDIV2_BIT 22 #define SYS_FC_FRDIV2_MASK (0xff << FQC2_FRDIV2_BIT) #define SYS_FC_FE2 (1<<21) #define SYS_FC_FS2 (1<<20) #define SYS_FC_FRDIV1_BIT 12 #define SYS_FC_FRDIV1_MASK (0xff << FQC2_FRDIV1_BIT) #define SYS_FC_FE1 (1<<11) #define SYS_FC_FS1 (1<<10) #define SYS_FC_FRDIV0_BIT 2 #define SYS_FC_FRDIV0_MASK (0xff << FQC2_FRDIV0_BIT) #define SYS_FC_FE0 (1<<1) #define SYS_FC_FS0 (1<<0) #define SYS_FREQCTRL1 0xB1900024 #define SYS_FC_FRDIV5_BIT 22 #define SYS_FC_FRDIV5_MASK (0xff << FQC2_FRDIV5_BIT) #define SYS_FC_FE5 (1<<21) #define SYS_FC_FS5 (1<<20) #define SYS_FC_FRDIV4_BIT 12 #define SYS_FC_FRDIV4_MASK (0xff << FQC2_FRDIV4_BIT) #define SYS_FC_FE4 (1<<11) #define SYS_FC_FS4 (1<<10) #define SYS_FC_FRDIV3_BIT 2 #define SYS_FC_FRDIV3_MASK (0xff << FQC2_FRDIV3_BIT) #define SYS_FC_FE3 (1<<1) #define SYS_FC_FS3 (1<<0) #define SYS_CLKSRC 0xB1900028 #define SYS_CS_ME1_BIT 27 #define SYS_CS_ME1_MASK (0x7<