/* * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH * Andreas Heppel * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * Initialisation of the PCI-to-ISA bridge and disabling the BIOS * write protection (for flash) in function 0 of the chip. * Enabling function 1 (IDE controller of the chip. */ #include #include #ifdef CFG_WINBOND_83C553 #include #include #include #define out8(addr,val) do { \ out_8((u8*) (addr),(val)); udelay(1); \ } while (0) #define out16(addr,val) do { \ out_be16((u16*) (addr),(val)); udelay(1); \ } while (0) extern uint ide_bus_offset[CFG_IDE_MAXBUS]; void initialise_pic(void); void initialise_dma(void); void initialise_w83c553f(void) { pci_dev_t devbusfn; unsigned char reg8; unsigned short reg16; unsigned int reg32; devbusfn = pci_find_device(W83C553F_VID, W83C553F_DID, 0); if (devbusfn == -1) { printf("Error: Cannot find W83C553F controller on any PCI bus."); return; } pci_read_config_word(devbusfn, PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; pci_write_config_word(devbusfn, PCI_COMMAND, reg16); pci_read_config_byte(devbusfn, WINBOND_IPADCR, ®8); /* 16 MB ISA memory space */ reg8 |= (IPADCR_IPATOM4 | IPADCR_IPATOM5 | IPADCR_IPATOM6 | IPADCR_IPATOM7); reg8 &= ~IPADCR_MBE512; pci_write_config_byte(devbusfn, WINBOND_IPADCR, reg8); pci_read_config_byte(devbusfn, WINBOND_CSCR, ®8); /* switch off BIOS write protection */ reg8 |= CSCR_UBIOSCSE; reg8 &= ~CSCR_BIOSWP; pci_write_config_byte(devbusfn, WINBOND_CSCR, reg8); /* * Interrupt routing: * - IDE -> IRQ 9/0 * - INTA -> IRQ 10 * - INTB -> IRQ 11 * - INTC -> IRQ 14 * - INTD -> IRQ 15 */ pci_write_config_byte(devbusfn, WINBOND_IDEIRCR, 0x90); pci_write_config_word(devbusfn, WINBOND_PCIIRCR, 0xABEF); /* * Read IDE bus offsets from function 1 device. * We must unmask the LSB indicating that ist is an IO address. */ devbusfn |= PCI_BDF(0,0,1); /* * Switch off legacy IRQ for IDE and IDE port 1. */ pci_write_config_byte(devbusfn, 0x09, 0x8F); pci_read_config_dword(devbusfn, WINDOND_IDECSR, ®32); reg32 &= ~(IDECSR_LEGIRQ | IDECSR_P1EN | IDECSR_P1F16); pci_write_config_dword(devbusfn, WINDOND_IDECSR, reg32); pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &ide_bus_offset[0]); ide_bus_offset[0] &= ~1; #if CFG_IDE_MAXBUS > 1 pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, &ide_bus_offset[1]); ide_bus_offset[1] &= ~1; #endif /* * Enable function 1, IDE -> busmastering and IO space access */ pci_read_config_word(devbusfn, PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO; pci_write_config_word(devbusfn, PCI_COMMAND, reg16); /* * Initialise ISA interrupt controller */ initialise_pic(); /* * Initialise DMA controller */ initialise_dma(); } void initialise_pic(void) { out8(W83C553F_PIC1_ICW1, 0x11); out8(W83C553F_PIC1_ICW2, 0x08); out8(W83C553F_PIC1_ICW3, 0x04); out8(W83C553F_PIC1_ICW4, 0x01); out8(W83C553F_PIC1_OCW1, 0xfb); out8(W83C553F_PIC1_ELC, 0x20); out8(W83C553F_PIC2_ICW1, 0x11); out8(W83C553F_PIC2_ICW2, 0x08); out8(W83C553F_PIC2_ICW3, 0x02); out8(W83C553F_PIC2_ICW4, 0x01); out8(W83C553F_PIC2_OCW1, 0xff); out8(W83C553F_PIC2_ELC, 0xce); out8(W83C553F_TMR1_CMOD, 0x74); out8(W83C553F_PIC2_OCW1, 0x20); out8(W83C553F_PIC1_OCW1, 0x20); out8(W83C553F_PIC2_OCW1, 0x2b); out8(W83C553F_PIC1_OCW1, 0x2b); } void initialise_dma(void) { unsigned int channel; unsigned int rvalue1, rvalue2; /* perform a H/W reset of the devices */ out8(W83C553F_DMA1 + W83C553F_DMA1_MC, 0x00); out16(W83C553F_DMA2 + W83C553F_DMA2_MC, 0x0000); /* initialise all channels to a sane state */ for (channel = 0; channel < 4; channel++) { /* * dependent upon the channel, setup the specifics: * * demand * address-increment * autoinitialize-disable * verify-transfer */ switch (channel) { case 0: rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY); rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL); break; case 1: rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); break; case 2: rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); break; case 3: rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); break; default: rvalue1 = 0x00; rvalue2 = 0x00; break; } /* write to write mode registers */ out8(W83C553F_DMA1 + W83C553F_DMA1_WM, rvalue1 & 0xFF); out16(W83C553F_DMA2 + W83C553F_DMA2_WM, rvalue2 & 0x00FF); } /* enable all channels */ out8(W83C553F_DMA1 + W83C553F_DMA1_CM, 0x00); out16(W83C553F_DMA2 + W83C553F_DMA2_CM, 0x0000); /* * initialize the global DMA configuration * * DACK# active low * DREQ active high * fixed priority * channel group enable */ out8(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00); out16(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000); } #endif /* CFG_WINBOND_83C553 */