/* * Video driver for Marvell Armada XP SoC * * Initialization of LCD interface and setup of SPLASH screen image * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include #include #include #define MVEBU_LCD_WIN_CONTROL(w) (MVEBU_LCD_BASE + 0xf000 + ((w) << 4)) #define MVEBU_LCD_WIN_BASE(w) (MVEBU_LCD_BASE + 0xf004 + ((w) << 4)) #define MVEBU_LCD_WIN_REMAP(w) (MVEBU_LCD_BASE + 0xf00c + ((w) << 4)) #define MVEBU_LCD_CFG_DMA_START_ADDR_0 (MVEBU_LCD_BASE + 0x00cc) #define MVEBU_LCD_CFG_DMA_START_ADDR_1 (MVEBU_LCD_BASE + 0x00dc) #define MVEBU_LCD_CFG_GRA_START_ADDR0 (MVEBU_LCD_BASE + 0x00f4) #define MVEBU_LCD_CFG_GRA_START_ADDR1 (MVEBU_LCD_BASE + 0x00f8) #define MVEBU_LCD_CFG_GRA_PITCH (MVEBU_LCD_BASE + 0x00fc) #define MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN (MVEBU_LCD_BASE + 0x0100) #define MVEBU_LCD_SPU_GRA_HPXL_VLN (MVEBU_LCD_BASE + 0x0104) #define MVEBU_LCD_SPU_GZM_HPXL_VLN (MVEBU_LCD_BASE + 0x0108) #define MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN (MVEBU_LCD_BASE + 0x010c) #define MVEBU_LCD_SPU_HWC_HPXL_VLN (MVEBU_LCD_BASE + 0x0110) #define MVEBU_LCD_SPUT_V_H_TOTAL (MVEBU_LCD_BASE + 0x0114) #define MVEBU_LCD_SPU_V_H_ACTIVE (MVEBU_LCD_BASE + 0x0118) #define MVEBU_LCD_SPU_H_PORCH (MVEBU_LCD_BASE + 0x011c) #define MVEBU_LCD_SPU_V_PORCH (MVEBU_LCD_BASE + 0x0120) #define MVEBU_LCD_SPU_BLANKCOLOR (MVEBU_LCD_BASE + 0x0124) #define MVEBU_LCD_SPU_ALPHA_COLOR1 (MVEBU_LCD_BASE + 0x0128) #define MVEBU_LCD_SPU_ALPHA_COLOR2 (MVEBU_LCD_BASE + 0x012c) #define MVEBU_LCD_SPU_COLORKEY_Y (MVEBU_LCD_BASE + 0x0130) #define MVEBU_LCD_SPU_COLORKEY_U (MVEBU_LCD_BASE + 0x0134) #define MVEBU_LCD_SPU_COLORKEY_V (MVEBU_LCD_BASE + 0x0138) #define MVEBU_LCD_CFG_RDREG4F (MVEBU_LCD_BASE + 0x013c) #define MVEBU_LCD_SPU_SPI_RXDATA (MVEBU_LCD_BASE + 0x0140) #define MVEBU_LCD_SPU_ISA_RXDATA (MVEBU_LCD_BASE + 0x0144) #define MVEBU_LCD_SPU_DBG_ISA (MVEBU_LCD_BASE + 0x0148) #define MVEBU_LCD_SPU_HWC_RDDAT (MVEBU_LCD_BASE + 0x0158) #define MVEBU_LCD_SPU_GAMMA_RDDAT (MVEBU_LCD_BASE + 0x015c) #define MVEBU_LCD_SPU_PALETTE_RDDAT (MVEBU_LCD_BASE + 0x0160) #define MVEBU_LCD_SPU_IOPAD_IN (MVEBU_LCD_BASE + 0x0178) #define MVEBU_LCD_FRAME_COUNT (MVEBU_LCD_BASE + 0x017c) #define MVEBU_LCD_SPU_DMA_CTRL0 (MVEBU_LCD_BASE + 0x0190) #define MVEBU_LCD_SPU_DMA_CTRL1 (MVEBU_LCD_BASE + 0x0194) #define MVEBU_LCD_SPU_SRAM_CTRL (MVEBU_LCD_BASE + 0x0198) #define MVEBU_LCD_SPU_SRAM_WRDAT (MVEBU_LCD_BASE + 0x019c) #define MVEBU_LCD_SPU_SRAM_PARA0 (MVEBU_LCD_BASE + 0x01a0) #define MVEBU_LCD_SPU_SRAM_PARA1 (MVEBU_LCD_BASE + 0x01a4) #define MVEBU_LCD_CFG_SCLK_DIV (MVEBU_LCD_BASE + 0x01a8) #define MVEBU_LCD_SPU_CONTRAST (MVEBU_LCD_BASE + 0x01ac) #define MVEBU_LCD_SPU_SATURATION (MVEBU_LCD_BASE + 0x01b0) #define MVEBU_LCD_SPU_CBSH_HUE (MVEBU_LCD_BASE + 0x01b4) #define MVEBU_LCD_SPU_DUMB_CTRL (MVEBU_LCD_BASE + 0x01b8) #define MVEBU_LCD_SPU_IOPAD_CONTROL (MVEBU_LCD_BASE + 0x01bc) #define MVEBU_LCD_SPU_IRQ_ENA_2 (MVEBU_LCD_BASE + 0x01d8) #define MVEBU_LCD_SPU_IRQ_ISR_2 (MVEBU_LCD_BASE + 0x01dc) #define MVEBU_LCD_SPU_IRQ_ENA (MVEBU_LCD_BASE + 0x01c0) #define MVEBU_LCD_SPU_IRQ_ISR (MVEBU_LCD_BASE + 0x01c4) #define MVEBU_LCD_ADLL_CTRL (MVEBU_LCD_BASE + 0x01c8) #define MVEBU_LCD_CLK_DIS (MVEBU_LCD_BASE + 0x01cc) #define MVEBU_LCD_VGA_HVSYNC_DELAY (MVEBU_LCD_BASE + 0x01d4) #define MVEBU_LCD_CLK_CFG_0 (MVEBU_LCD_BASE + 0xf0a0) #define MVEBU_LCD_CLK_CFG_1 (MVEBU_LCD_BASE + 0xf0a4) #define MVEBU_LCD_LVDS_CLK_CFG (MVEBU_LCD_BASE + 0xf0ac) #define MVEBU_LVDS_PADS_REG (MVEBU_SYSTEM_REG_BASE + 0xf0) /* Setup Mbus Bridge Windows for LCD */ static void mvebu_lcd_conf_mbus_registers(void) { const struct mbus_dram_target_info *dram; int i; dram = mvebu_mbus_dram_info(); /* Disable windows, set size/base/remap to 0 */ for (i = 0; i < 6; i++) { writel(0, MVEBU_LCD_WIN_CONTROL(i)); writel(0, MVEBU_LCD_WIN_BASE(i)); writel(0, MVEBU_LCD_WIN_REMAP(i)); } /* Write LCD bridge window registers */ for (i = 0; i < dram->num_cs; i++) { const struct mbus_dram_window *cs = dram->cs + i; writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | (dram->mbus_dram_target_id << 4) | 1, MVEBU_LCD_WIN_CONTROL(i)); writel(cs->base & 0xffff0000, MVEBU_LCD_WIN_BASE(i)); } } /* Initialize LCD registers */ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info) { /* Local variable for easier handling */ int x = lcd_info->x_res; int y = lcd_info->y_res; u32 val; /* Setup Mbus Bridge Windows */ mvebu_lcd_conf_mbus_registers(); /* * Set LVDS Pads Control Register * wr 0 182F0 FFE00000 */ clrbits_le32(MVEBU_LVDS_PADS_REG, 0x1f << 16); /* * Set the LCD_CFG_GRA_START_ADDR0/1 Registers * This is supposed to point to the "physical" memory at memory * end (currently 1GB-64MB but also may be 2GB-64MB). * See also the Window 0 settings! */ writel(lcd_info->fb_base, MVEBU_LCD_CFG_GRA_START_ADDR0); writel(lcd_info->fb_base, MVEBU_LCD_CFG_GRA_START_ADDR1); /* * Set the LCD_CFG_GRA_PITCH Register * Bits 31-28: Duty Cycle of Backlight. value/16=High (0x8=Mid Setting) * Bits 25-16: Backlight divider from 32kHz Clock * (here 16=0x10 for 1kHz) * Bits 15-00: Line Length in Bytes * 240*2 (for RGB1555)=480=0x1E0 */ writel(0x80100000 + 2 * x, MVEBU_LCD_CFG_GRA_PITCH); /* * Set the LCD_SPU_GRA_OVSA_HPXL_VLN Register * Bits 31-16: Vertical start of graphical overlay on screen * Bits 15-00: Horizontal start of graphical overlay on screen */ writel(0x00000000, MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN); /* * Set the LCD_SPU_GRA_HPXL_VLN Register * Bits 31-16: Vertical size of graphical overlay 320=0x140 * Bits 15-00: Horizontal size of graphical overlay 240=0xF0 * Values before zooming */ writel((y << 16) | x, MVEBU_LCD_SPU_GRA_HPXL_VLN); /* * Set the LCD_SPU_GZM_HPXL_VLN Register * Bits 31-16: Vertical size of graphical overlay 320=0x140 * Bits 15-00: Horizontal size of graphical overlay 240=0xF0 * Values after zooming */ writel((y << 16) | x, MVEBU_LCD_SPU_GZM_HPXL_VLN); /* * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register * Bits 31-16: Vertical position of HW Cursor 320=0x140 * Bits 15-00: Horizontal position of HW Cursor 240=0xF0 */ writel((y << 16) | x, MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN); /* * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register * Bits 31-16: Vertical size of HW Cursor * Bits 15-00: Horizontal size of HW Cursor */ writel(0x00000000, MVEBU_LCD_SPU_HWC_HPXL_VLN); /* * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register * Bits 31-16: Screen total vertical lines: * VSYNC = 1 * Vertical Front Porch = 2 * Vertical Lines = 320 * Vertical Back Porch = 2 * SUM = 325 = 0x0145 * Bits 15-00: Screen total horizontal pixels: * HSYNC = 1 * Horizontal Front Porch = 44 * Horizontal Lines = 240 * Horizontal Back Porch = 2 * SUM = 287 = 0x011F * Note: For the display the backporch is between SYNC and * the start of the pixels. * This is not certain for the Marvell (!?) */ val = ((y + lcd_info->y_fp + lcd_info->y_bp + 1) << 16) | (x + lcd_info->x_fp + lcd_info->x_bp + 1); writel(val, MVEBU_LCD_SPUT_V_H_TOTAL); /* * Set the LCD_SPU_V_H_ACTIVE Register * Bits 31-16: Screen active vertical lines 320=0x140 * Bits 15-00: Screen active horizontakl pixels 240=0x00F0 */ writel((y << 16) | x, MVEBU_LCD_SPU_V_H_ACTIVE); /* * Set the LCD_SPU_H_PORCH Register * Bits 31-16: Screen horizontal backporch 44=0x2c * Bits 15-00: Screen horizontal frontporch 2=0x02 * Note: The terms "front" and "back" for the Marvell seem to be * exactly opposite to the display. */ writel((lcd_info->x_fp << 16) | lcd_info->x_bp, MVEBU_LCD_SPU_H_PORCH); /* * Set the LCD_SPU_V_PORCH Register * Bits 31-16: Screen vertical backporch 2=0x02 * Bits 15-00: Screen vertical frontporch 2=0x02 * Note: The terms "front" and "back" for the Marvell seem to be exactly * opposite to the display. */ writel((lcd_info->y_fp << 16) | lcd_info->y_bp, MVEBU_LCD_SPU_V_PORCH); /* * Set the LCD_SPU_BLANKCOLOR Register * This should be black = 0 * For tests this is magenta=00FF00FF */ writel(0x00FF00FF, MVEBU_LCD_SPU_BLANKCOLOR); /* * Registers in the range of 0x0128 to 0x012C are colors for the cursor * Registers in the range of 0x0130 to 0x0138 are colors for video * color keying */ /* * Set the LCD_SPU_RDREG4F Register * Bits 31-12: Reservd * Bit 11: SRAM Wait * Bit 10: Smart display fast TX (must be 1) * Bit 9: DMA Arbitration Video/Graphics overlay: 0=interleaved * Bit 8: FIFO watermark for DMA: 0=disable * Bits 07-00: Empty 8B FIFO entries to trigger DMA, default=0x80 */ writel(0x00000780, MVEBU_LCD_CFG_RDREG4F); /* * Set the LCD_SPU_DMACTRL 0 Register * Bit 31: Disable overlay blending 1=disable * Bit 30: Gamma correction enable, 0=disable * Bit 29: Video Contrast/Saturation/Hue Adjust enable, 0=disable * Bit 28: Color palette enable, 0=disable * Bit 27: DMA AXI Arbiter, 1=default * Bit 26: HW Cursor 1-bit mode * Bit 25: HW Cursor or 1- or 2-bit mode * Bit 24: HW Cursor enabled, 0=disable * Bits 23-20: Graphics Memory Color Format: 0x1=RGB1555 * Bits 19-16: Video Memory Color Format: 0x1=RGB1555 * Bit 15: Memory Toggle between frame 0 and 1: 0=disable * Bit 14: Graphics horizontal scaling enable: 0=disable * Bit 13: Graphics test mode: 0=disable * Bit 12: Graphics SWAP R and B: 0=disable * Bit 11: Graphics SWAP U and V: 0=disable * Bit 10: Graphics SWAP Y and U/V: 0=disable * Bit 09: Graphic YUV to RGB Conversion: 0=disable * Bit 08: Graphic Transfer: 1=enable * Bit 07: Memory Toggle: 0=disable * Bit 06: Video horizontal scaling enable: 0=disable * Bit 05: Video test mode: 0=disable * Bit 04: Video SWAP R and B: 0=disable * Bit 03: Video SWAP U and V: 0=disable * Bit 02: Video SWAP Y and U/V: 0=disable * Bit 01: Video YUV to RGB Conversion: 0=disable * Bit 00: Video Transfer: 0=disable */ writel(0x88111100, MVEBU_LCD_SPU_DMA_CTRL0); /* * Set the LCD_SPU_DMA_CTRL1 Register * Bit 31: Manual DMA Trigger = 0 * Bits 30-28: DMA Trigger Source: 0x2 VSYNC * Bit 28: VSYNC_INV: 0=Rising Edge, 1=Falling Edge * Bits 26-24: Color Key Mode: 0=disable * Bit 23: Fill low bits: 0=fill with zeroes * Bit 22: Reserved * Bit 21: Gated Clock: 0=disable * Bit 20: Power Save enable: 0=disable * Bits 19-18: Reserved * Bits 17-16: Configure Video/Graphic Path: 0x1: Graphic path alpha. * Bits 15-08: Configure Alpha: 0x00. * Bits 07-00: Reserved. */ writel(0x20010000, MVEBU_LCD_SPU_DMA_CTRL1); /* * Set the LCD_SPU_SRAM_CTRL Register * Reset to default = 0000C000 * Bits 15-14: SRAM control: init=0x3, Read=0, Write=2 * Bits 11-08: SRAM address ID: 0=gamma_yr, 1=gammy_ug, 2=gamma_vb, * 3=palette, 15=cursor */ writel(0x0000C000, MVEBU_LCD_SPU_SRAM_CTRL); /* * LCD_SPU_SRAM_WRDAT register: 019C * LCD_SPU_SRAM_PARA0 register: 01A0 * LCD_SPU_SRAM_PARA1 register: 01A4 - Cursor control/Power settings */ writel(0x00000000, MVEBU_LCD_SPU_SRAM_PARA1); /* Clock settings in the at 01A8 and in the range F0A0 see below */ /* * Set LCD_SPU_CONTRAST * Bits 31-16: Brightness sign ext. 8-bit value +255 to -255: default=0 * Bits 15-00: Contrast sign ext. 8-bit value +255 to -255: default=0 */ writel(0x00000000, MVEBU_LCD_SPU_CONTRAST); /* * Set LCD_SPU_SATURATION * Bits 31-16: Multiplier signed 4.12 fixed point value * Bits 15-00: Saturation signed 4.12 fixed point value */ writel(0x10001000, MVEBU_LCD_SPU_SATURATION); /* * Set LCD_SPU_HUE * Bits 31-16: Sine signed 2.14 fixed point value * Bits 15-00: Cosine signed 2.14 fixed point value */ writel(0x00000000, MVEBU_LCD_SPU_CBSH_HUE); /* * Set LCD_SPU_DUMB_CTRL * Bits 31-28: LCD Type: 3=18 bit RGB | 6=24 bit RGB888 * Bits 27-12: Reserved * Bit 11: LCD DMA Pipeline Enable: 1=Enable * Bits 10-09: Reserved * Bit 8: LCD GPIO pin (??) * Bit 7: Reverse RGB * Bit 6: Invert composite blank signal DE/EN (??) * Bit 5: Invert composite sync signal * Bit 4: Invert Pixel Valid Enable DE/EN (??) * Bit 3: Invert VSYNC * Bit 2: Invert HSYNC * Bit 1: Invert Pixel Clock * Bit 0: Enable LCD Panel: 1=Enable * Question: Do we have to disable Smart and Dumb LCD * and separately enable LVDS? */ writel(0x6000080F, MVEBU_LCD_SPU_DUMB_CTRL); /* * Set LCD_SPU_IOPAD_CTRL * Bits 31-20: Reserved * Bits 19-18: Vertical Interpolation: 0=Disable * Bits 17-16: Reserved * Bit 15: Graphics Vertical Mirror enable: 0=disable * Bit 14: Reserved * Bit 13: Video Vertical Mirror enable: 0=disable * Bit 12: Reserved * Bit 11: Command Vertical Mirror enable: 0=disable * Bit 10: Reserved * Bits 09-08: YUV to RGB Color space conversion: 0 (Not used) * Bits 07-04: AXI Bus Master: 0x4: no crossing of 4k boundary, * 128 Bytes burst * Bits 03-00: LCD pins: ??? 0=24-bit Dump panel ?? */ writel(0x000000C0, MVEBU_LCD_SPU_IOPAD_CONTROL); /* * Set SUP_IRQ_ENA_2: Disable all interrupts */ writel(0x00000000, MVEBU_LCD_SPU_IRQ_ENA_2); /* * Set SUP_IRQ_ENA: Disable all interrupts. */ writel(0x00000000, MVEBU_LCD_SPU_IRQ_ENA); /* * Set up ADDL Control Register * Bits 31-29: 0x0 = Fastest Delay Line (default) * 0x3 = Slowest Delay Line (default) * Bit 28: Calibration done status. * Bit 27: Reserved * Bit 26: Set Pixel Clock to ADDL output * Bit 25: Reduce CAL Enable * Bits 24-22: Manual calibration value. * Bit 21: Manual calibration enable. * Bit 20: Restart Auto Cal * Bits 19-16: Calibration Threshold voltage, default= 0x2 * Bite 15-14: Reserved * Bits 13-11: Divisor for ADDL Clock: 0x1=/2, 0x3=/8, 0x5=/16 * Bit 10: Power Down ADDL module, default = 1! * Bits 09-08: Test point configuration: 0x2=Bias, 0x3=High-z * Bit 07: Reset ADDL * Bit 06: Invert ADLL Clock * Bits 05-00: Delay taps, 0x3F=Half Cycle, 0x00=No delay * Note: ADLL is used for a VGA interface with DAC - not used here */ writel(0x00000000, MVEBU_LCD_ADLL_CTRL); /* * Set the LCD_CLK_DIS Register: * Bits 3 and 4 must be 1 */ writel(0x00000018, MVEBU_LCD_CLK_DIS); /* * Set the LCD_VGA_HSYNC/VSYNC Delay Register: * Bits 03-00: Sets the delay for the HSYNC and VSYNC signals */ writel(0x00000000, MVEBU_LCD_VGA_HVSYNC_DELAY); /* * Clock registers * See page 475 in the functional spec. */ /* Step 1 and 2: Disable the PLL */ /* * Disable PLL, see "LCD Clock Configuration 1 Register" below */ writel(0x8FF40007, MVEBU_LCD_CLK_CFG_1); /* * Powerdown, see "LCD Clock Configuration 0 Register" below */ writel(0x94000174, MVEBU_LCD_CLK_CFG_0); /* * Set the LCD_CFG_SCLK_DIV Register * This is set fix to 0x40000001 for the LVDS output: * Bits 31-30: SCLCK Source: 0=AXIBus, 1=AHBus, 2=PLLDivider0 * Bits 15-01: Clock Divider: Bypass for LVDS=0x0001 * See page 475 in section 28.5. */ writel(0x80000001, MVEBU_LCD_CFG_SCLK_DIV); /* * Set the LCD Clock Configuration 0 Register: * Bit 31: Powerdown: 0=Power up * Bits 30-29: Reserved * Bits 28-26: PLL_KDIV: This encodes K * K=16 => 0x5 * Bits 25-17: PLL_MDIV: This is M-1: * M=1 => 0x0 * Bits 16-13: VCO band: 0x1 for 700-920MHz * Bits 12-04: PLL_NDIV: This is N-1 and corresponds to R1_CTRL! * N=28=0x1C => 0x1B * Bits 03-00: R1_CTRL (for N=28 => 0x4) */ writel(0x940021B4, MVEBU_LCD_CLK_CFG_0); /* * Set the LCD Clock Configuration 1 Register: * Bits 31-19: Reserved * Bit 18: Select PLL: Core PLL, 1=Dedicated PPL * Bit 17: Clock Output Enable: 0=disable, 1=enable * Bit 16: Select RefClk: 0=RefClk (25MHz), 1=External * Bit 15: Half-Div, Device Clock by DIV+0.5*Half-Dev * Bits 14-13: Reserved * Bits 12-00: PLL Full Divider [Note: Assumed to be the Post-Divider * M' for LVDS=7!] */ writel(0x8FF40007, MVEBU_LCD_CLK_CFG_1); /* * Set the LVDS Clock Configuration Register: * Bit 31: Clock Gating for the input clock to the LVDS * Bit 30: LVDS Serializer enable: 1=Enabled * Bits 29-11: Reserved * Bit 11-08: LVDS Clock delay: 0x02 (default): by 2 pixel clock/7 * Bits 07-02: Reserved * Bit 01: 24bbp Option: 0=Option_1,1=Option2 * Bit 00: 1=24bbp Panel: 0=18bpp Panel * Note: Bits 0 and must be verified with the help of the * Interface/display */ writel(0xC0000201, MVEBU_LCD_LVDS_CLK_CFG); /* * Power up PLL (Clock Config 0) */ writel(0x140021B4, MVEBU_LCD_CLK_CFG_0); /* wait 10 ms */ mdelay(10); /* * Enable PLL (Clock Config 1) */ writel(0x8FF60007, MVEBU_LCD_CLK_CFG_1); return 0; } int __weak board_video_init(void) { return -1; } void *video_hw_init(void) { static GraphicDevice mvebufb; GraphicDevice *pGD = &mvebufb; u32 val; /* * The board code needs to call mvebu_lcd_register_init() * in its board_video_init() implementation, with the board * specific parameters for its LCD. */ if (board_video_init() || !readl(MVEBU_LCD_CFG_GRA_START_ADDR0)) return NULL; /* Provide the necessary values for the U-Boot video IF */ val = readl(MVEBU_LCD_SPU_V_H_ACTIVE); pGD->winSizeY = val >> 16; pGD->winSizeX = val & 0x0000ffff; pGD->gdfBytesPP = 2; pGD->gdfIndex = GDF_15BIT_555RGB; pGD->frameAdrs = readl(MVEBU_LCD_CFG_GRA_START_ADDR0); debug("LCD: buffer at 0x%08x resolution %dx%d\n", pGD->frameAdrs, pGD->winSizeX, pGD->winSizeY); return pGD; }