/*- * Copyright (c) 2007-2008, Juniper Networks, Inc. * Copyright (c) 2008, Excito Elektronik i Skåne AB * Copyright (c) 2008, Michael Trimarchi * * All rights reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation version 2 of * the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include "ehci.h" int rootdev; struct ehci_hccr *hccr; /* R/O registers, not need for volatile */ volatile struct ehci_hcor *hcor; static uint16_t portreset; DEFINE_ALIGN_BUFFER(struct QH, qh_list, 1, USB_DMA_MINALIGN); #define ALIGN_END_ADDR(type, ptr, size) \ ((uint32_t)(ptr) + roundup((size) * sizeof(type), USB_DMA_MINALIGN)) static struct descriptor { struct usb_hub_descriptor hub; struct usb_device_descriptor device; struct usb_linux_config_descriptor config; struct usb_linux_interface_descriptor interface; struct usb_endpoint_descriptor endpoint; } __attribute__ ((packed)) descriptor = { { 0x8, /* bDescLength */ 0x29, /* bDescriptorType: hub descriptor */ 2, /* bNrPorts -- runtime modified */ 0, /* wHubCharacteristics */ 10, /* bPwrOn2PwrGood */ 0, /* bHubCntrCurrent */ {}, /* Device removable */ {} /* at most 7 ports! XXX */ }, { 0x12, /* bLength */ 1, /* bDescriptorType: UDESC_DEVICE */ cpu_to_le16(0x0200), /* bcdUSB: v2.0 */ 9, /* bDeviceClass: UDCLASS_HUB */ 0, /* bDeviceSubClass: UDSUBCLASS_HUB */ 1, /* bDeviceProtocol: UDPROTO_HSHUBSTT */ 64, /* bMaxPacketSize: 64 bytes */ 0x0000, /* idVendor */ 0x0000, /* idProduct */ cpu_to_le16(0x0100), /* bcdDevice */ 1, /* iManufacturer */ 2, /* iProduct */ 0, /* iSerialNumber */ 1 /* bNumConfigurations: 1 */ }, { 0x9, 2, /* bDescriptorType: UDESC_CONFIG */ cpu_to_le16(0x19), 1, /* bNumInterface */ 1, /* bConfigurationValue */ 0, /* iConfiguration */ 0x40, /* bmAttributes: UC_SELF_POWER */ 0 /* bMaxPower */ }, { 0x9, /* bLength */ 4, /* bDescriptorType: UDESC_INTERFACE */ 0, /* bInterfaceNumber */ 0, /* bAlternateSetting */ 1, /* bNumEndpoints */ 9, /* bInterfaceClass: UICLASS_HUB */ 0, /* bInterfaceSubClass: UISUBCLASS_HUB */ 0, /* bInterfaceProtocol: UIPROTO_HSHUBSTT */ 0 /* iInterface */ }, { 0x7, /* bLength */ 5, /* bDescriptorType: UDESC_ENDPOINT */ 0x81, /* bEndpointAddress: * UE_DIR_IN | EHCI_INTR_ENDPT */ 3, /* bmAttributes: UE_INTERRUPT */ 8, /* wMaxPacketSize */ 255 /* bInterval */ }, }; #if defined(CONFIG_EHCI_IS_TDI) #define ehci_is_TDI() (1) #else #define ehci_is_TDI() (0) #endif void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) { mdelay(50); } void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) __attribute__((weak, alias("__ehci_powerup_fixup"))); static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) { uint32_t result; do { result = ehci_readl(ptr); udelay(5); if (result == ~(uint32_t)0) return -1; result &= mask; if (result == done) return 0; usec--; } while (usec > 0); return -1; } static int ehci_reset(void) { uint32_t cmd; uint32_t tmp; uint32_t *reg_ptr; int ret = 0; cmd = ehci_readl(&hcor->or_usbcmd); cmd = (cmd & ~CMD_RUN) | CMD_RESET; ehci_writel(&hcor->or_usbcmd, cmd); ret = handshake((uint32_t *)&hcor->or_usbcmd, CMD_RESET, 0, 250 * 1000); if (ret < 0) { printf("EHCI fail to reset\n"); goto out; } if (ehci_is_TDI()) { reg_ptr = (uint32_t *)((u8 *)hcor + USBMODE); tmp = ehci_readl(reg_ptr); tmp |= USBMODE_CM_HC; #if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN) tmp |= USBMODE_BE; #endif ehci_writel(reg_ptr, tmp); } #ifdef CONFIG_USB_EHCI_TXFIFO_THRESH cmd = ehci_readl(&hcor->or_txfilltuning); cmd &= ~TXFIFO_THRESH(0x3f); cmd |= TXFIFO_THRESH(CONFIG_USB_EHCI_TXFIFO_THRESH); ehci_writel(&hcor->or_txfilltuning, cmd); #endif out: return ret; } static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz) { uint32_t delta, next; uint32_t addr = (uint32_t)buf; int idx; if (addr != ALIGN(addr, ARCH_DMA_MINALIGN)) debug("EHCI-HCD: Misaligned buffer address (%p)\n", buf); flush_dcache_range(addr, ALIGN(addr + sz, ARCH_DMA_MINALIGN)); idx = 0; while (idx < QT_BUFFER_CNT) { td->qt_buffer[idx] = cpu_to_hc32(addr); td->qt_buffer_hi[idx] = 0; next = (addr + 4096) & ~4095; delta = next - addr; if (delta >= sz) break; sz -= delta; addr = next; idx++; } if (idx == QT_BUFFER_CNT) { printf("out of buffer pointers (%u bytes left)\n", sz); return -1; } return 0; } static int ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, int length, struct devrequest *req) { ALLOC_ALIGN_BUFFER(struct QH, qh, 1, USB_DMA_MINALIGN); ALLOC_ALIGN_BUFFER(struct qTD, qtd, 3, USB_DMA_MINALIGN); int qtd_counter = 0; volatile struct qTD *vtd; unsigned long ts; uint32_t *tdp; uint32_t endpt, token, usbsts; uint32_t c, toggle; uint32_t cmd; int timeout; int ret = 0; debug("dev=%p, pipe=%lx, buffer=%p, length=%d, req=%p\n", dev, pipe, buffer, length, req); if (req != NULL) debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n", req->request, req->request, req->requesttype, req->requesttype, le16_to_cpu(req->value), le16_to_cpu(req->value), le16_to_cpu(req->index)); memset(qh, 0, sizeof(struct QH)); memset(qtd, 0, 3 * sizeof(*qtd)); toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); /* * Setup QH (3.6 in ehci-r10.pdf) * * qh_link ................. 03-00 H * qh_endpt1 ............... 07-04 H * qh_endpt2 ............... 0B-08 H * - qh_curtd * qh_overlay.qt_next ...... 13-10 H * - qh_overlay.qt_altnext */ qh->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH); c = (usb_pipespeed(pipe) != USB_SPEED_HIGH && usb_pipeendpoint(pipe) == 0) ? 1 : 0; endpt = (8 << 28) | (c << 27) | (usb_maxpacket(dev, pipe) << 16) | (0 << 15) | (1 << 14) | (usb_pipespeed(pipe) << 12) | (usb_pipeendpoint(pipe) << 8) | (0 << 7) | (usb_pipedevice(pipe) << 0); qh->qh_endpt1 = cpu_to_hc32(endpt); endpt = (1 << 30) | (dev->portnr << 23) | (dev->parent->devnum << 16) | (0 << 8) | (0 << 0); qh->qh_endpt2 = cpu_to_hc32(endpt); qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); tdp = &qh->qh_overlay.qt_next; if (req != NULL) { /* * Setup request qTD (3.5 in ehci-r10.pdf) * * qt_next ................ 03-00 H * qt_altnext ............. 07-04 H * qt_token ............... 0B-08 H * * [ buffer, buffer_hi ] loaded with "req". */ qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); token = (0 << 31) | (sizeof(*req) << 16) | (0 << 15) | (0 << 12) | (3 << 10) | (2 << 8) | (0x80 << 0); qtd[qtd_counter].qt_token = cpu_to_hc32(token); if (ehci_td_buffer(&qtd[qtd_counter], req, sizeof(*req)) != 0) { printf("unable construct SETUP td\n"); goto fail; } /* Update previous qTD! */ *tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]); tdp = &qtd[qtd_counter++].qt_next; toggle = 1; } if (length > 0 || req == NULL) { /* * Setup request qTD (3.5 in ehci-r10.pdf) * * qt_next ................ 03-00 H * qt_altnext ............. 07-04 H * qt_token ............... 0B-08 H * * [ buffer, buffer_hi ] loaded with "buffer". */ qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); token = (toggle << 31) | (length << 16) | ((req == NULL ? 1 : 0) << 15) | (0 << 12) | (3 << 10) | ((usb_pipein(pipe) ? 1 : 0) << 8) | (0x80 << 0); qtd[qtd_counter].qt_token = cpu_to_hc32(token); if (ehci_td_buffer(&qtd[qtd_counter], buffer, length) != 0) { printf("unable construct DATA td\n"); goto fail; } /* Update previous qTD! */ *tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]); tdp = &qtd[qtd_counter++].qt_next; } if (req != NULL) { /* * Setup request qTD (3.5 in ehci-r10.pdf) * * qt_next ................ 03-00 H * qt_altnext ............. 07-04 H * qt_token ............... 0B-08 H */ qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); token = (toggle << 31) | (0 << 16) | (1 << 15) | (0 << 12) | (3 << 10) | ((usb_pipein(pipe) ? 0 : 1) << 8) | (0x80 << 0); qtd[qtd_counter].qt_token = cpu_to_hc32(token); /* Update previous qTD! */ *tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]); tdp = &qtd[qtd_counter++].qt_next; } qh_list->qh_link = cpu_to_hc32((uint32_t)qh | QH_LINK_TYPE_QH); /* Flush dcache */ flush_dcache_range((uint32_t)qh_list, ALIGN_END_ADDR(struct QH, qh_list, 1)); flush_dcache_range((uint32_t)qh, ALIGN_END_ADDR(struct QH, qh, 1)); flush_dcache_range((uint32_t)qtd, ALIGN_END_ADDR(struct qTD, qtd, 3)); /* Set async. queue head pointer. */ ehci_writel(&hcor->or_asynclistaddr, (uint32_t)qh_list); usbsts = ehci_readl(&hcor->or_usbsts); ehci_writel(&hcor->or_usbsts, (usbsts & 0x3f)); /* Enable async. schedule. */ cmd = ehci_readl(&hcor->or_usbcmd); cmd |= CMD_ASE; ehci_writel(&hcor->or_usbcmd, cmd); ret = handshake((uint32_t *)&hcor->or_usbsts, STD_ASS, STD_ASS, 100 * 1000); if (ret < 0) { printf("EHCI fail timeout STD_ASS set\n"); goto fail; } /* Wait for TDs to be processed. */ ts = get_timer(0); vtd = &qtd[qtd_counter - 1]; timeout = USB_TIMEOUT_MS(pipe); do { /* Invalidate dcache */ invalidate_dcache_range((uint32_t)qh_list, ALIGN_END_ADDR(struct QH, qh_list, 1)); invalidate_dcache_range((uint32_t)qh, ALIGN_END_ADDR(struct QH, qh, 1)); invalidate_dcache_range((uint32_t)qtd, ALIGN_END_ADDR(struct qTD, qtd, 3)); token = hc32_to_cpu(vtd->qt_token); if (!(token & 0x80)) break; WATCHDOG_RESET(); } while (get_timer(ts) < timeout); /* * Invalidate the memory area occupied by buffer * Don't try to fix the buffer alignment, if it isn't properly * aligned it's upper layer's fault so let invalidate_dcache_range() * vow about it. But we have to fix the length as it's actual * transfer length and can be unaligned. This is potentially * dangerous operation, it's responsibility of the calling * code to make sure enough space is reserved. */ invalidate_dcache_range((uint32_t)buffer, ALIGN((uint32_t)buffer + length, ARCH_DMA_MINALIGN)); /* Check that the TD processing happened */ if (token & 0x80) { printf("EHCI timed out on TD - token=%#x\n", token); } /* Disable async schedule. */ cmd = ehci_readl(&hcor->or_usbcmd); cmd &= ~CMD_ASE; ehci_writel(&hcor->or_usbcmd, cmd); ret = handshake((uint32_t *)&hcor->or_usbsts, STD_ASS, 0, 100 * 1000); if (ret < 0) { printf("EHCI fail timeout STD_ASS reset\n"); goto fail; } token = hc32_to_cpu(qh->qh_overlay.qt_token); if (!(token & 0x80)) { debug("TOKEN=%#x\n", token); switch (token & 0xfc) { case 0: toggle = token >> 31; usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), toggle); dev->status = 0; break; case 0x40: dev->status = USB_ST_STALLED; break; case 0xa0: case 0x20: dev->status = USB_ST_BUF_ERR; break; case 0x50: case 0x10: dev->status = USB_ST_BABBLE_DET; break; default: dev->status = USB_ST_CRC_ERR; if ((token & 0x40) == 0x40) dev->status |= USB_ST_STALLED; break; } dev->act_len = length - ((token >> 16) & 0x7fff); } else { dev->act_len = 0; debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n", dev->devnum, ehci_readl(&hcor->or_usbsts), ehci_readl(&hcor->or_portsc[0]), ehci_readl(&hcor->or_portsc[1])); } return (dev->status != USB_ST_NOT_PROC) ? 0 : -1; fail: return -1; } static inline int min3(int a, int b, int c) { if (b < a) a = b; if (c < a) a = c; return a; } int ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, int length, struct devrequest *req) { uint8_t tmpbuf[4]; u16 typeReq; void *srcptr = NULL; int len, srclen; uint32_t reg; uint32_t *status_reg; if (le16_to_cpu(req->index) > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) { printf("The request port(%d) is not configured\n", le16_to_cpu(req->index) - 1); return -1; } status_reg = (uint32_t *)&hcor->or_portsc[ le16_to_cpu(req->index) - 1]; srclen = 0; debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n", req->request, req->request, req->requesttype, req->requesttype, le16_to_cpu(req->value), le16_to_cpu(req->index)); typeReq = req->request | req->requesttype << 8; switch (typeReq) { case DeviceRequest | USB_REQ_GET_DESCRIPTOR: switch (le16_to_cpu(req->value) >> 8) { case USB_DT_DEVICE: debug("USB_DT_DEVICE request\n"); srcptr = &descriptor.device; srclen = 0x12; break; case USB_DT_CONFIG: debug("USB_DT_CONFIG config\n"); srcptr = &descriptor.config; srclen = 0x19; break; case USB_DT_STRING: debug("USB_DT_STRING config\n"); switch (le16_to_cpu(req->value) & 0xff) { case 0: /* Language */ srcptr = "\4\3\1\0"; srclen = 4; break; case 1: /* Vendor */ srcptr = "\16\3u\0-\0b\0o\0o\0t\0"; srclen = 14; break; case 2: /* Product */ srcptr = "\52\3E\0H\0C\0I\0 " "\0H\0o\0s\0t\0 " "\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0"; srclen = 42; break; default: debug("unknown value DT_STRING %x\n", le16_to_cpu(req->value)); goto unknown; } break; default: debug("unknown value %x\n", le16_to_cpu(req->value)); goto unknown; } break; case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8): switch (le16_to_cpu(req->value) >> 8) { case USB_DT_HUB: debug("USB_DT_HUB config\n"); srcptr = &descriptor.hub; srclen = 0x8; break; default: debug("unknown value %x\n", le16_to_cpu(req->value)); goto unknown; } break; case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8): debug("USB_REQ_SET_ADDRESS\n"); rootdev = le16_to_cpu(req->value); break; case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: debug("USB_REQ_SET_CONFIGURATION\n"); /* Nothing to do */ break; case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8): tmpbuf[0] = 1; /* USB_STATUS_SELFPOWERED */ tmpbuf[1] = 0; srcptr = tmpbuf; srclen = 2; break; case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8): memset(tmpbuf, 0, 4); reg = ehci_readl(status_reg); if (reg & EHCI_PS_CS) tmpbuf[0] |= USB_PORT_STAT_CONNECTION; if (reg & EHCI_PS_PE) tmpbuf[0] |= USB_PORT_STAT_ENABLE; if (reg & EHCI_PS_SUSP) tmpbuf[0] |= USB_PORT_STAT_SUSPEND; if (reg & EHCI_PS_OCA) tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT; if (reg & EHCI_PS_PR) tmpbuf[0] |= USB_PORT_STAT_RESET; if (reg & EHCI_PS_PP) tmpbuf[1] |= USB_PORT_STAT_POWER >> 8; if (ehci_is_TDI()) { switch ((reg >> 26) & 3) { case 0: break; case 1: tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8; break; case 2: default: tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8; break; } } else { tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8; } if (reg & EHCI_PS_CSC) tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION; if (reg & EHCI_PS_PEC) tmpbuf[2] |= USB_PORT_STAT_C_ENABLE; if (reg & EHCI_PS_OCC) tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT; if (portreset & (1 << le16_to_cpu(req->index))) tmpbuf[2] |= USB_PORT_STAT_C_RESET; srcptr = tmpbuf; srclen = 4; break; case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): reg = ehci_readl(status_reg); reg &= ~EHCI_PS_CLEAR; switch (le16_to_cpu(req->value)) { case USB_PORT_FEAT_ENABLE: reg |= EHCI_PS_PE; ehci_writel(status_reg, reg); break; case USB_PORT_FEAT_POWER: if (HCS_PPC(ehci_readl(&hccr->cr_hcsparams))) { reg |= EHCI_PS_PP; ehci_writel(status_reg, reg); } break; case USB_PORT_FEAT_RESET: if ((reg & (EHCI_PS_PE | EHCI_PS_CS)) == EHCI_PS_CS && !ehci_is_TDI() && EHCI_PS_IS_LOWSPEED(reg)) { /* Low speed device, give up ownership. */ debug("port %d low speed --> companion\n", req->index - 1); reg |= EHCI_PS_PO; ehci_writel(status_reg, reg); break; } else { int ret; reg |= EHCI_PS_PR; reg &= ~EHCI_PS_PE; ehci_writel(status_reg, reg); /* * caller must wait, then call GetPortStatus * usb 2.0 specification say 50 ms resets on * root */ ehci_powerup_fixup(status_reg, ®); ehci_writel(status_reg, reg & ~EHCI_PS_PR); /* * A host controller must terminate the reset * and stabilize the state of the port within * 2 milliseconds */ ret = handshake(status_reg, EHCI_PS_PR, 0, 2 * 1000); if (!ret) portreset |= 1 << le16_to_cpu(req->index); else printf("port(%d) reset error\n", le16_to_cpu(req->index) - 1); } break; default: debug("unknown feature %x\n", le16_to_cpu(req->value)); goto unknown; } /* unblock posted writes */ (void) ehci_readl(&hcor->or_usbcmd); break; case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): reg = ehci_readl(status_reg); switch (le16_to_cpu(req->value)) { case USB_PORT_FEAT_ENABLE: reg &= ~EHCI_PS_PE; break; case USB_PORT_FEAT_C_ENABLE: reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE; break; case USB_PORT_FEAT_POWER: if (HCS_PPC(ehci_readl(&hccr->cr_hcsparams))) reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP); case USB_PORT_FEAT_C_CONNECTION: reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC; break; case USB_PORT_FEAT_OVER_CURRENT: reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC; break; case USB_PORT_FEAT_C_RESET: portreset &= ~(1 << le16_to_cpu(req->index)); break; default: debug("unknown feature %x\n", le16_to_cpu(req->value)); goto unknown; } ehci_writel(status_reg, reg); /* unblock posted write */ (void) ehci_readl(&hcor->or_usbcmd); break; default: debug("Unknown request\n"); goto unknown; } mdelay(1); len = min3(srclen, le16_to_cpu(req->length), length); if (srcptr != NULL && len > 0) memcpy(buffer, srcptr, len); else debug("Len is 0\n"); dev->act_len = len; dev->status = 0; return 0; unknown: debug("requesttype=%x, request=%x, value=%x, index=%x, length=%x\n", req->requesttype, req->request, le16_to_cpu(req->value), le16_to_cpu(req->index), le16_to_cpu(req->length)); dev->act_len = 0; dev->status = USB_ST_STALLED; return -1; } int usb_lowlevel_stop(void) { return ehci_hcd_stop(); } int usb_lowlevel_init(void) { uint32_t reg; uint32_t cmd; if (ehci_hcd_init() != 0) return -1; /* EHCI spec section 4.1 */ if (ehci_reset() != 0) return -1; #if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET) if (ehci_hcd_init() != 0) return -1; #endif /* Set head of reclaim list */ memset(qh_list, 0, sizeof(*qh_list)); qh_list->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH); qh_list->qh_endpt1 = cpu_to_hc32((1 << 15) | (USB_SPEED_HIGH << 12)); qh_list->qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE); qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); qh_list->qh_overlay.qt_token = cpu_to_hc32(0x40); reg = ehci_readl(&hccr->cr_hcsparams); descriptor.hub.bNbrPorts = HCS_N_PORTS(reg); printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts); /* Port Indicators */ if (HCS_INDICATOR(reg)) descriptor.hub.wHubCharacteristics |= 0x80; /* Port Power Control */ if (HCS_PPC(reg)) descriptor.hub.wHubCharacteristics |= 0x01; /* Start the host controller. */ cmd = ehci_readl(&hcor->or_usbcmd); /* * Philips, Intel, and maybe others need CMD_RUN before the * root hub will detect new devices (why?); NEC doesn't */ cmd &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); cmd |= CMD_RUN; ehci_writel(&hcor->or_usbcmd, cmd); /* take control over the ports */ cmd = ehci_readl(&hcor->or_configflag); cmd |= FLAG_CF; ehci_writel(&hcor->or_configflag, cmd); /* unblock posted write */ cmd = ehci_readl(&hcor->or_usbcmd); mdelay(5); reg = HC_VERSION(ehci_readl(&hccr->cr_capbase)); printf("USB EHCI %x.%02x\n", reg >> 8, reg & 0xff); rootdev = 0; return 0; } int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int length) { if (usb_pipetype(pipe) != PIPE_BULK) { debug("non-bulk pipe (type=%lu)", usb_pipetype(pipe)); return -1; } return ehci_submit_async(dev, pipe, buffer, length, NULL); } int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int length, struct devrequest *setup) { if (usb_pipetype(pipe) != PIPE_CONTROL) { debug("non-control pipe (type=%lu)", usb_pipetype(pipe)); return -1; } if (usb_pipedevice(pipe) == rootdev) { if (rootdev == 0) dev->speed = USB_SPEED_HIGH; return ehci_submit_root(dev, pipe, buffer, length, setup); } return ehci_submit_async(dev, pipe, buffer, length, setup); } int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int length, int interval) { debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d", dev, pipe, buffer, length, interval); /* * Interrupt transfers requiring several transactions are not supported * because bInterval is ignored. */ if (length > usb_maxpacket(dev, pipe)) { printf("%s: Interrupt transfers requiring several transactions " "are not supported.\n", __func__); return -1; } return ehci_submit_async(dev, pipe, buffer, length, NULL); }