/* * Copyright 2009-2010, 2013 Freescale Semiconductor, Inc. * Jun-jie Zhang * Mingkai Hu * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include #include #include void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr, int dev_addr, int regnum, int value) { int timeout = 1000000; out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f)); out_be32(&phyregs->miimcon, value); /* Memory barrier */ mb(); while ((in_be32(&phyregs->miimind) & MIIMIND_BUSY) && timeout--) ; } int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr, int dev_addr, int regnum) { int value; int timeout = 1000000; /* Put the address of the phy, and the register * number into MIIMADD */ out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f)); /* Clear the command register, and wait */ out_be32(&phyregs->miimcom, 0); /* Memory barrier */ mb(); /* Initiate a read command, and wait */ out_be32(&phyregs->miimcom, MIIMCOM_READ_CYCLE); /* Memory barrier */ mb(); /* Wait for the the indication that the read is done */ while ((in_be32(&phyregs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) && timeout--) ; /* Grab the value read from the PHY */ value = in_be32(&phyregs->miimstat); return value; } static int fsl_pq_mdio_reset(struct mii_dev *bus) { struct tsec_mii_mng __iomem *regs = (struct tsec_mii_mng __iomem *)bus->priv; /* Reset MII (due to new addresses) */ out_be32(®s->miimcfg, MIIMCFG_RESET_MGMT); out_be32(®s->miimcfg, MIIMCFG_INIT_VALUE); while (in_be32(®s->miimind) & MIIMIND_BUSY) ; return 0; } int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum) { struct tsec_mii_mng __iomem *phyregs = (struct tsec_mii_mng __iomem *)bus->priv; return tsec_local_mdio_read(phyregs, addr, dev_addr, regnum); } int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, u16 value) { struct tsec_mii_mng __iomem *phyregs = (struct tsec_mii_mng __iomem *)bus->priv; tsec_local_mdio_write(phyregs, addr, dev_addr, regnum, value); return 0; } int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info) { struct mii_dev *bus = mdio_alloc(); if (!bus) { printf("Failed to allocate FSL MDIO bus\n"); return -1; } bus->read = tsec_phy_read; bus->write = tsec_phy_write; bus->reset = fsl_pq_mdio_reset; sprintf(bus->name, info->name); bus->priv = (void *)info->regs; return mdio_register(bus); }